Non-Native Writer (NNW) English Texts versus Native Writer ...
DIR110NN - tokyokeiso.co.id · TOR 2 TG-L1026-0E MODEL CODE APPLICATION Model code DIR11 Additional...
2
・ ADDITIONAL FUNCTION : Relay output(prepared in DIR111NN□ ) Relay contact output, up to 6 points, is prepared. These contacts are used for control of tank peripheral instrument, such as valves, remotely from control room through communication line via FW9000NN. ・ OUTPUT Number of contact ：up to 6 (if 2 contacts in FW9000NN are used, 4 contacts are allowed to use in DIR111NN） Contact : SPDT(1a1b) Capacity : 250 V AC/3A, 30 V DC/3A (resistive load) ・ INPUT Number of contact : up to 6 Contact type : semiconductor type/ mechanical type Semiconductor type : ON resistance; less than 500Ω ON voltage ; less than 1.5 V ON current ; approx.5 mA OFF resistance ; > 100 kΩ OFF voltage ; less than 12 V Mechanical type : rating 30 V DC/10 mA ・ CONSTRUCTION Flame proof construction : ExdIICT6 (TIIS certification TC14584) ・ POWER SUPPLY : 100–240 V AC, 50/60Hz ・ CABLE ENTRY : Max.4 pieces Nominal dia.1/2 to 1 inch At least 1/2 inch entry is At least 1/2 inch entry is necessarily assigned at one place G (=PF) or NPT (=F) ・ CABLE TERMINATION : Plug type terminal connection (terminal No. to be referred to Approval drawing) ・ POWER CONSUMPTION : 20 VA ・ AMBIENT TEMPERATURE : –40 to +60 degC (–20 to +55 degC: TIIS) ・ INSTALLATION : On to 2 inches pipe ・ HOUSING MATERIAL : Aluminum casting (AC2A) ・ MASS : 10 kg ■ GENERAL DIR110NN is a tank side indicator for tank gauges. Connected to Tokyo Keiso's tank top servo operated tank gauge FW9000NN series, DIR110NN indicates liquid level, temperature and other operation status. Required data for tank related are displayed on it at the tank side, resulting in easier tank control and management with time saving. In addition to indicating functions, maximum 6 points relay output are prepared. This function makes easier connection to higher level computer and/or peripheral equipments. By accessing magnet sensors, shown as arrows on the indicator, various data are pre-settable for operating FW9000NN. ■ STANDARD SPECIFICATION ● CONNECTABLE TRANSMITTER : Servo operated tank gauge FW9000NN series made by Tokyo Keiso Co., Ltd. which has standard serial datacoded output. DIR110NN TANK SIDE INDICATOR � Indication part Arrow LCD � Details of LCD presentation 1 2 3 4 5 .6mm 12312345 Level indication part (7 digits) Status indication (3 digits) (Error motor control sate of displacer) Data indication (5 digits) (Temperature etc.) ɾOperation mode 0 0 0 0 0 5 0 mm H 00300 Data indication (7 digits) ɾParameter mode Register indication (hold, input, adjustment) Code indication (5 digits) (hold, input, adjusted data) TG-L1026-0E Feb.2015 First edition K
Transcript of DIR110NN - tokyokeiso.co.id · TOR 2 TG-L1026-0E MODEL CODE APPLICATION Model code DIR11 Additional...
・ADDITIONALFUNCTION : Relayoutput(preparedinDIR111NN□ ) Relaycontactoutput,upto6points,isprepared.These contactsareusedforcontroloftankperipheralinstrument, suchasvalves,remotelyfromcontrolroomthrough communicationlineviaFW9000NN.・OUTPUT Numberofcontact：upto6 (if2contactsinFW9000NN areused,4contactsare allowedtouseinDIR111NN） Contact : SPDT(1a1b) Capacity : 250VAC/3A,30VDC/3A (resistiveload)・INPUT Numberofcontact : upto6 Contacttype :semiconductortype/ mechanicaltype Semiconductortype: ONresistance;lessthan500Ω ONvoltage ;lessthan1.5V ONcurrent ;approx.5mA OFFresistance;>100kΩ OFFvoltage ;lessthan12V Mechanicaltype : rating30VDC/10mA・CONSTRUCTION Flameproofconstruction : ExdIICT6 (TIIScertificationTC14584) ・POWERSUPPLY : 100–240VAC,50/60Hz・CABLEENTRY :Max.4piecesNominaldia.1/2 to1inch Atleast1/2inchentryisAt least1/2inchentryis necessarilyassignedatone place G(=PF)orNPT(=F)・CABLETERMINATION : Plugtypeterminalconnection (terminalNo.tobereferredto Approvaldrawing)・POWERCONSUMPTION : 20VA・AMBIENTTEMPERATURE : –40to+60degC(–20to+55 degC:TIIS)・INSTALLATION : Onto2inchespipe・HOUSINGMATERIAL : Aluminumcasting(AC2A)・MASS : 10kg
■ GENERALDIR110NNisatanksideindicatorfortankgauges.ConnectedtoTokyoKeiso'stanktopservooperatedtankgaugeFW9000NNseries,DIR110NNindicatesliquidlevel,temperatureandotheroperationstatus.Requireddatafortankrelatedaredisplayedonitatthetankside,resultingineasiertankcontrolandmanagementwithtimesaving.Inadditiontoindicatingfunctions,maximum6pointsrelayoutputareprepared.Thisfunctionmakeseasierconnectiontohigherlevelcomputerand/orperipheralequipments.Byaccessingmagnetsensors,shownasarrowsontheindicator,variousdataarepre-settableforoperatingFW9000NN.
■ STANDARDSPECIFICATION●CONNECTABLETRANSMITTER : Servooperatedtankgauge FW9000NNseriesmadebyTokyoKeisoCo., Ltd.whichhasstandardserialdatacoded output.
DIR110NNTANKSIDEINDICATOR
� Indication part
Arrow
LCD
� Details of LCD presentation
1 2 3 4 5 . 6 mm1 2 3 1 2 3 4 5
Level indication part (7 digits)
Status indication (3 digits)(Error motor control sateof displacer)
Data indication (5 digits)(Temperature etc.)
・Operation mode
0 0 0 0 0 5 0 mmH 0 0 3 0 0
Data indication (7 digits)
・Parameter mode
Register indication(hold, input, adjustment)
Code indication (5 digits)(hold, input, adjusted data)
TG-L1026-0EFeb.2015First edition K
DIR110NN TANK SIDE INDICATOR
TG-L1026-0E2
■APPLICATION■MODELCODE
Model code
DIR11
Additionalfunction
Construction
0
1
NNW
NNE
Indication only
Relay input‒output
Weather proof
Flame proof
Description
Model code
Cable entry
Cable glands□ to be included □ to be excluded
DIR11□NN□
□ G Screw □ NPT Screw
Cable diameter___mm
Tank gauge □ FW9000NNNumber of input-outputpoints of relay contact
Specify others ifrequired
Output___ points Input___ points
■DIMENSION
■ ORDERINGINFORMATION Specifyfollowingitemsforyourinquiryorordering.
Head Of�ce : Shiba Toho Building, 1 – 7 – 24 Shibakoen, Minato-ku, Tokyo 105 – 8558
Tel : +81-3 – 3431 – 1625 (KEY) ; Fax : +81-3 – 3433 – 4922e-mail : [email protected] ; URL : http://www.tokyokeiso.co.jp
* Speci�cation is subject to change without notice.
φ210
φ133
2215070 ( )
348.5
( )
255( )
2"PIPE
