FEDALfedalel.com/userfiles/file/ProductcatalogENG2017.pdf · Diode driver (QCW), model SF3xx ......
Transcript of FEDALfedalel.com/userfiles/file/ProductcatalogENG2017.pdf · Diode driver (QCW), model SF3xx ......
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
2
About company........................................................................................................................3
Lamp-pumped laser power supplies......................................................................................4
Laser power supply for lamp-pumped laser,
models SF13xx...... ..............................................................................................................5
Multichannel electric power supplied system for diode-pumped lasers
model MEPSS .....................................................................................................................7
Diode drivers ...........................................................................................................................8
Diode driver (QCW),
model SF3xx........................................................................................................................9
Diode driver (QCW / CW),
models SF5xx.....................................................................................................................11
Diode driver (CW),
model SF6xxx....................................................................................................................13
Diode driver with TEC controller for Butterfly LD
model SF8xxx....................................................................................................................15
Accessories..............................................................................................................................17
Control unit for multichannel systems,
model CU700.....................................................................................................................18
Temperature controller for Peltier (TEC)
model SP100......................................................................................................................20
PREVIEW: TEC controller SP40
model SP40........................................................................................................................21
PREVIEW: Programmed power supply,
model NT...........................................................................................................................23
Contacts..................................................................................................................................25
Contents
FEDAL is a modern company specializing in development and production of laser elec-
tronics. FEDAL was founded at 2002. Working hard for this years our specialists have re-
ceived unique experience, which allows them to solve a wide range of problems promptly. We
are able to develop and produce either unique products both a single copy for experimental or
laboratory works, and small-scale products line to participate in the processor chain of compa-
nies, specializing in of laser equipment manufacturing. FEDAL has its own factory, located in St.
Petersburg and is quipped with modern automated lines. Our clients are famous Russian Uni-
versities and factories such as LOMO, National Research University of Information Technolo-
gy, Mechanics and Optics, State Optical institute, Federal State Unitary Enterprise Scientific and
Industrial Corporation "Vavilov State Optical Institute", State Research Center of Russian Fed-
eration TROITSK INSTITUTE FOR INNOVATION & FUSION RESEARCH.
Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
3
Lamp-pumped Laser Power Supplies SF
Pulse Continue Diode-pumped Lamp-pumped Fiber lasers Multichannel
5
Laser power supply for lamp-pumped laser
model SF13x
Information
Specifications
FEDAL
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
Laser power supply is designed for lamp-pumped lasers. Its used for operation in the industrial laser applications (welding, heat treatment, cutting, scribing and firmware holes), laboratory, educational, medical and experimental machines.
*Optionally
SF134-1 SF134-2 SF138
Maximum gas discharge length 100 mm 100 mm
Number of lamps one one one or two
Pulse rate 0.1 - 30 Hz, single pulse 0.1 - 30 Hz, single pulse 0.1 - 20 Hz, single pulse
Output voltage 1000 V 1600 V 750 V
Voltage accuracy ± 0.3 % ± 0.3 % ± 0.3 %
Battery capacitance according technical task according technical task
Pulse duration determined by storage capacitor
determined by storage capacitor 0.1-6 ms
Duration changing step - - 0.1 ms
Discharging type full discharge full discharge partial discharge
Average charger power 1.6 kW 1.6 kW 5 kW
Simmer mode current 0.6 А 0.6 А 0.6 А
Communication interface RS232 RS232 RS232*
Data display LCD LCD LCD
Trigger in 5 V, 10 μs 5 V, 10 μs 5 V, 10 μs*
Trigger out 5 V, 10 μs 5 V, 10 μs 5 V, 10 μs*
Attenuator control - - 2*27 V
Trigger delay up 0 to + 250 μs up 0 to + 250 μs 0-6 ms*
Interlock switch contact closure switch contact closure switch contact closure
Accessories connection 220 VAC, 5 А 220 VAC, 5 А three phase 220 / 380V, 50Hz
Power Input single phase 220 VAC, 50Hz
single phase 220 VAC, 50Hz
three phase 220/380 VAC, 50Hz
Dimensions 440*179*440 mm; 4U 440*179*480 mm; 4U 440*356*440 mm (2 modules); 2x4U
Weight 25 kg 27 kg 40 kg
6
Dimensions
model SF13x FEDAL
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
SF134-1 SF134-2
А (mm) 440 480
SF138
А (mm) 440
7
Laser multichannel electric power supplied system is designed for sup-plying high-power multi-channel lasers. The power supply system of a powerful multi-channel laser is used in special laser systems, laser tech-nological complexes, in researches of laser-matter interaction; inertial confinement fusion; stands for the laser diodes arrays testing and etc. MEPSS can be equipped with all any supplies and charging module by FEDAL. The company has experience in designing MEPSS with the num-ber of power supplies up to 50 pieces. The potential number of units is unlimited. The MEPSS structure includes modules that provide control and synchronization of power supplies.
Multichannel electric power supplied system for diode-pumped lasers
model MEPSS
Information
Specifications
* Values are limited by average power: V*I≤P
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
MEPSS
Average output power 250 kW
Numbers of modules 2-50
Numbers of triggers 1 - 8
External communication interface RS232, USB, Ethernet
Internal communication interface RS232, FOCL
Mode synchronous / asynchronous
Trigger type Internal / External
Input power 310 kW max
Cooling Air / Water cooled
Power Input three-phase 220/380 VAC, 50 Hz
Diode Drivers SF
Pulse Continue Low-power High-power
9
Switched mode laser power supply is designed for supplying diode array, which are
used for pumping powerful solid or fiber lasers. Power supply is designed for opera-
tion in the laboratory, educational, experimental and industrial applications. Addi-
tionally the power supply can be equipped with a LD thermal stabilization control-
ler (TEC controller). Also it has current limit, duty cycle limit and safety interlocks.
Could be modified by a customer's request for the optimal selection of parameters
for a specific load.
Diode driver (QCW)
model SF3xx
Information
Specifications
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
* Values are limited by average power: F*V*I*τ≤P
**With a length of laser diode power wire is not more than 2m
***Installation of FOCL, LAN on request
SF306 SF315 SF350
Pulse rate* (F) 1 — 500 Hz, single pulse 1 — 500 Hz, single pulse 1 — 1000 Hz, single pulse
Output voltage* (V) 0-140 V 0-300 V 0-300 V
Output current* (I) 1-150 А 1-300 А 1-350 А
Pulse duration* (τ) 50-1000 μs 50-1000 μs 50-1000 μs
Rise time** <60 μs <60 μs <60 μs
Fall time** <60 μs <60 μs <60 μs
Output current tolerance 0.3 % 0.3 % 0.3 %
Average output power* (P) 0.4 kW 1.5 kW 4.6 kW
Data display LCD LCD LCD
Communication interface*** RS232 RS232 RS232
Trigger in 5 V, 10 μs 5 V, 10 μs 5 V, 10 μs
Trigger out 5 V, 10 μs 5 V, 10 μs 5 V, 10 μs
Trigger out delay 1-1100 μs 1-1100 μs 1-1100 μs
Interlock switch contact closure switch contact closure switch contact closure
Power Input single phase 220 VAC, 50Hz
single phase 220 VAC, 50Hz
three phase 220/380 VAC, 50Hz
Type of cooling air cooling air cooling air / Water cooling
Dimensions 440*88*345 mm; 2U 440*132*440 mm; 3U 440*177*485 mm; 4U
Weight 10 kg 12 kg 25 kg
10
Dimensions
model SF3xx FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
SF306
SF315
SF350
11
Pulse / CW laser power supply for diode-pumped lasers is de-signed to supply diode arrays, that are used for the pumping of high-power solid-state or fiber lasers. Power supply is designed
for operation in the laboratory, educational, experimental and indus-
trial applications. Additionally the power supply can be equipped with
a thermal stabilization controller (TEC controller). Also it has current
limit, duty cycle limit and safety interlocks. Could be modified by a
customer's request for the optimal selection of parameters for a spe-
cific load.
Diode driver (QCW / CW)
model SF5xx
Information
Specifications
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
FEDAL Development & production of laser electronics
* Values are limited by average power: F*V*I*τ≤P (pulse mode); V*I≤P (CW mode)
***Installation of FOCL, LAN on request
**With a length of laser diode power wire is not more than 2m
SF530 SF550
pulse mode CW pulse mode CW
Pulse rate* (F) 1-500 Hz, single mode - 1-1000 Hz,
single mode -
Output voltage* (V) 0-160 V 0-160 V 0-200 V 0-200 V
Output current* (I) 1-300 А 1-300 А 1-350 А 1-350 А
Pulse duration* (τ) 50-1000 μs - 50-1000 μs -
Rise time** <60 μs - <60 μs -
Fall time** <60 μs - <60 μs -
Output current tolerance 0.3 % 0.3 % 0.3 % 0.3 %
Average output power* (P) 2.5 kW 2.5 kW 4.6 kW 4.6 kW
Data display LCD LCD
Communication interface*** RS232 RS232
Trigger in 5 V, 10 μs 5 V, 10 μs
Trigger out 5 V, 10 μs 5 V, 10 μs
Interlock switch contact closure switch contact closure
Cooling air / water cooled air / water cooled
Power Input single phase 220 VAC, 50Hz three phase 220/380 VAC, 50Hz
Dimensions 440*132*440 mm; 3U 440*132*485 mm; 3U
Weight 23 kg 25 kg
12
model SF5xx
Dimensions
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
FEDAL
SF530 SF550
А (mm) 440 485
13
Diode driver is designed to supply the laser diodes and diode ar-rays in CW mode. Supplied as a module OEM. Diode drivers SF6xxx series are used in industrial laser application (marking, welding, sol-dering, cutting), medical equipment, laser measuring equipment (spectrometers, lidar, range finders).
Diode driver (CW)
model SF6xxx
Information
Specifications
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
SF6030
Active and preferred
SF6070 Preview
SF6100 Active and preferred
SF6015 Active and preferred
Mode CW CW CW CW
Output voltage (V) 0-10 V (0.8*Vin max)
0-10 V (0.8*Vin max)
5-40 V (0.73*Vin max)
0-10 V (0.8*Vin max)
Output current (I) 1-30 А 1-75 А 1-20 А 1-15 А
Pumping current changing step 0.1 А 0.3 А 0.1 А 0.1 А
Rise time <1000 μs - <500 μs <1000 μs
Fall time <15 μs - <15 μs <15 μs
Current stability 0.2 % 0.2 % 0.2 % 0.2 %
Current set accuracy 1% 1% 1% 1%
Input voltage range (Vin) 10-14 V 10-14 V 12-55 V 10-14 V
Control analog; digital RS-232
analog; digital RS-232
analog; digital RS-232
analog; digital RS-232
Dimension (mm) 37*58*30
quarter-brick
61*58*30
half-brick
61*58*30
half-brick
37*58*30
quarter-brick
Features
• No need to adjust voltage
• Soft-start
• Adjustable current limit
• Thermal warning and shutdown
• Reverse current protection
• Crowbar circuit protection
• Universal controls
• Enable / disable input
• Analog and digital interface
• Interlock
• Over current protection
• Auxiliary voltage outputs (+/- 15V and + 5V)
14
model SF6xxx
Dimensions
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
FEDAL
SF6015 / SF6030
SF6070 / SF6100
SF8XXX driver is designed to power and temperature control of the Butterfly Laser Diode. The design pro-vides landing pad for soldering the laser diode on the board. Options: - supply with Azimuth connectors, providing the possi-bility of fast diode replacement; - supply with large heatsink for stable heat dissipation
Diode driver with TEC controller for Butterfly LD
Information
Specifications
model SF8xxx FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
SF8025 SF8075 SF8150
Output power 250mA 750mA 1500mA
Output voltage 0.5 - 3V
Input voltage 5V
ТЕС output power up to ±4А
TEC output voltage up to ±4V
Output current noise 10-15 µA
Current stability 0.1%
The current accuracy 1%
TEC output current ripple 2-4 mА
The range of temperature changes from +17 to +40 °C
Sensor NTC 10 kOhm
Control analog
Features
• no need to adjust voltage
• soft start
• adjustable current protection
• protective reverse diode
• crowbar circuit protection
• integrated PID controller, doesn't require setup
• adjustable TEC voltage limit
15
model SF8xxx
Dimensions
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
FEDAL
SF8xxx
16
Accessories SF Thermostabilization Smoothing current Energy measurement Synchronization Remote control Lamp ignition
18
The control unit, operating with timing-pulse distributor, is designed to control one or more laser power supplies. The controller has user-friendly communication interface, LCD, one trigger in and 8 trigger out. Can be connected to a PC via RS232, USB, Ethernet.
Control unit for multichannel systems
model CU700
Information
Specifications
CU700
Number of slave modules 2-8
Number of triggers 8
Communication interface (module)* RS232
Trigger modes in / out
Communication interface (PC) RS232, USB, Ethernet
Trigger mode synchronous
Trigger in 5 В, 10 μs
Trigger out 5 В, 10 μs
Power Input 220VAC, 50Hz
Data display LCD
Dimensions 440*132*485 mm
Weight 5 kg
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-
*Installation of FOCL on request
*Возможна установка ВОЛС по требованию заказчика
19
model CU700
Dimensions
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
20
TEC controllers SP100 is designed for controlling Peltier ele-ment being applied to high-precision maintaining predeter-mined temperature. Used to high-precision maintenance of the temperature of precision laser diodes, nonlinear crystals, the solutions in process liquids dispensers, etc. TEC controller operates according to the PWM principle, that provides stepless of the output voltage to the thermoelectric module. The design of the controller provides a smoothing filter that provides an Peltier element operation with optimum settings (excludes accelerated cell degradation and local failures).
Temperature controller for Peltier (TEC)
model SP100
Information
Specifications
SP 100
TEC output current 12 А
TEC output voltage 24 V
Temperature control stability 0,1 °C
Sensor type pt100; pt1000; NTC thermistor 10 kOhm
Temperature range with Pt100 and Pt1000 от -25°C до +100 °C
Temperature range with NTC thermistor 10 kOhm от -5°C до +100 °C
Controller temperature setting range up -50°C to +110 °C
Working temperature up -25° C to +50 °C
Supply voltage 15-30 V
Control RS232, UART
Dimensions 61*116,8*30 mm full-brick
Weight 85 g
FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
TEC controller SP40 is designed for power and control of the Peltier elements. TEC controller SP40 is a non isolat-ed DC/DC. It has a low current ripples and adjustable TEC voltage limit. Integrated PID controller provides optimal achievement of the predetermined temperatures and doesn’t require adjustment.
TEC controller SP40
Information
Specifications
model SP40 FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
SP40
Power supply 5V to 12V
Output current ± 4A
Temperature sensor NTC 10k
Temperature setting range +17°C to +40°C
Analog control, output voltage limit
21
model SP40
Dimensions
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
Development & production of laser electronics
FEDAL
SP40
22
PREVIEW: model NT FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
23
Programmed power supply
Information
Programmable power supply is designed for supply electronic equipment and appliances, charge of capacitive storage. Is designed in a 19 "2U case and is installed in a rack or separately. The manual control (controls on the front panel) or remote control from external PC. Power sup-plies are protected against overheating, over-voltage and over-current.
Specifications
Model Voltage Current
NT 30-165 0-30 V 0-165 А
NT 60-80 0-60 V 0-80 А
NT 100-50 0-100 V 0-50 А
NT 300-16 0-300 V 0-16 А
NT 500-10 0-500 V 0-10 А
• Output electrical power 5 kW; • Communication interface RS-232; • Software is included; • Remote ON / OFF; • Height 3U; • Power Input: 380 V (50 Hz), three phase.
model NT FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
24
Dimensions
model PLD100 FEDAL Development & production of laser electronics
FEDAL, Serdobolskaya 65 lit. A, Saint-Petersburg, Russia, 197342
phone /fax +7 (812) 326-07-48
e-mail: [email protected], [email protected]
www.fedalel.com
21
Contacts
FEDAL, LLC
65 Serdobolskaya str.
197342, Saint-Petersburg, Russia
+7 (812) 326 07 48
www.fedalel.com