DIN規格 --- 2019-04月新刊情報

DIN 2019-4 新刊情報(1/16page)

DIN規格 --- 　 2019-04 月　新刊情報　 ---

規格番号原文表題

DIN EN 13756:2019 Wood flooring and parquet - Terminology; Trilingual version EN 13756:2018 38,491円 (本体35,640円)

DIN EN ISO 21183-2:2019

Light conveyor belts - Part 2: List of equivalent terms (ISO 21183-2:2018); Germanversion EN ISO 21183-2:2018

24,192円 (本体22,400円)

DIN EN ISO 41011:2019Facility management - Vocabulary (ISO 41011:2017); German version EN ISO41011:2018

19,396円 (本体17,960円)

DIN ISO 16069:2019Graphical symbols - Safety signs - Safety way guidance systems (SWGS) (ISO16069:2017)

30,693円 (本体28,420円)


DIN EN ISO 41011:2019Facility management - Vocabulary (ISO 41011:2017); German version EN ISO41011:2018

19,396円 (本体17,960円)

DIN EN ISO/IEC 17021-2:2019

Conformity assessment - Requirements for bodies providing audit and certification ofmanagement systems - Part 2: Competence requirements for auditing and certificationof environmental management systems (ISO/IEC 17021-2:2016); German and Englishversion EN ISO/IEC 17021-2:2018

22,550円 (本体20,880円)

DIN EN ISO/IEC 17021-3:2019

Conformity assessment - Requirements for bodies providing audit and certification ofmanagement systems - Part 3: Competence requirements for auditing and certificationof quality management systems (ISO/IEC 17021-3:2017); German and English versionEN ISO/IEC 17021-3:2018

17,690円 (本体16,380円)


DIN EN ISO 11930:2019Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmeticproduct (ISO 11930:2019); German version EN ISO 11930:2019

24,192円 (本体22,400円)

DIN ISO 28902-3:2019Air quality - Environmental meteorology - Part 3: Ground-based remote sensing ofwind by continuous-wave Doppler lidar (ISO 28902-3:2018)

20,930円 (本体19,380円)

日本規格協会グループ

＊規格はICS分類別に掲載しております。分類は1つの規格に対して複数付けられる場合があります。　そのため、一覧の規格数は実際の出版規格数より多くなっていることがございますのでご注意ください。＊ここに掲載している規格は原則としてドイツ語版です。＊ご注文は末尾の注文書をご利用ください。

01 総論．用語．標準化．ドキュメンテーション

定価(本体価格)

03 社会学．サービス．経営組織及び管理．行政．運輸


07 数学．自然科学


JSA Japanese Standards Association ＊本表記載の規格のご購入につきましては、当協会本部までFAXにてご注文願います。



DIN 6868-100:2019Image quality assurance in diagnostic X-ray departments - Part 100: Determination ofphysical parameters for the evaluation of the image quality in digital mammography

22,550円 (本体20,880円)

DIN EN 60601-2-40*VDE 0750-2-40:2019

Medical electrical equipment - Part 2-40: Particular requirements for the basic safetyand essential performance of electromyographs and evoked response equipment (IEC60601-2-40:2016); German version EN 60601-2-40:2019

15,994円 (本体14,810円)

DIN EN 60601-2-43*VDE 0750-2-43:2019

Medical electrical equipment - Part 2-43: Particular requirements for the basic safetyand essential performance of X-ray equipment for interventional procedures (IEC60601-2-43:2010 + A1:2017); German version EN 60601-2-43:2010 + A1:2018

23,738円 (本体21,980円)

DIN EN ISO 11070:2019Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014 +Amd 1:2018); German version EN ISO 11070:2014 + A1:2018

25,552円 (本体23,660円)

DIN EN ISO 20166-1:2019

Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 1: IsolatedRNA (ISO 20166-1:2018); German version EN ISO 20166-1:2018

24,192円 (本体22,400円)

DIN EN ISO 20166-2:2019

Molecular in vitro diagnostic examinations - Specifications for pre-examinationsprocesses for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 2: Isolatedproteins (ISO 20166-2:2018); German version EN ISO 20166-2:2018

22,550円 (本体20,880円)

DIN EN ISO 20166-3:2019

Molecular in vitro diagnostic examinations - Specifications for pre-examinationprocesses for formalin-fixed and paraffin-embedded (FFPE) tissue - Part 3: IsolatedDNA (ISO 20166-3:2018); German version EN ISO 20166-3:2019

20,930円 (本体19,380円)

DIN EN ISO 20696:2019Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2018-09);German version EN ISO 20696:2018

26,827円 (本体24,840円)

DIN EN ISO 20697:2019Sterile drainage catheters and accessory devices for single use (ISO 20697:2018,Corrected version 2018-09); German version EN ISO 20697:2018

28,036円 (本体25,960円)


DIN 14010:2019 Statements for fire statistics 19,396円 (本体17,960円)

DIN 30760:2019Mobile waste and recycling containers - Containers with two wheels with a capacityfrom 60 l to 360 l for diamond lifting devices

14,472円 (本体13,400円)

DIN EN 13832-1:2019Footwear protecting against chemicals - Part 1: Terminology and test methods;German version EN 13832-1:2018

19,396円 (本体17,960円)

DIN EN 13832-2:2019Footwear protecting against chemicals - Part 2: Requirements for limited contact withchemicals; German version EN 13832-2:2018

22,550円 (本体20,880円)

DIN EN 13832-3:2019Footwear protecting against chemicals - Part 3: Requirements for prolonged contactwith chemicals; German version EN 13832-3:2018

20,930円 (本体19,380円)

DIN EN 1484:2019Water analysis - Guidelines for the determination of total organic carbon (TOC) anddissolved organic carbon (DOC); German version EN 1484:1997

17,690円 (本体16,380円)

11 医療技術


13 環境．健康予防．安全




DIN EN 16907-2:2019 Earthworks - Part 2: Classification of materials; German version EN 16907-2:2018 29,419円 (本体27,240円)

DIN EN 50291-1*VDE0400-34-1:2019

Gas detectors - Electrical apparatus for the detection of carbon monoxide in domesticpremises - Part 1: Test methods and performance requirements; German version EN50291-1:2018

18,273円 (本体16,920円)

DIN EN 60825-1 Beiblatt2*VDE 0837-1 Beiblatt2:2019

Safety of laser products - Part 1: Equipment classification and requirements;Supplement 2: Interpretation Sheet 1 (IEC 60825-1:2014/ISH1:2017)

5,076円 (本体4,700円)



3,164円 (本体2,930円)

DIN EN IEC 60900*VDE0682-201:2019

Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC (IEC 60900:2018);German version EN IEC 60900:2018

22,852円 (本体21,160円)

DIN EN IEC 62820-3-2*VDE 0830-91-3-2:2019

Building intercom systems - Part 3-2: Application guidelines - Advanced securitybuilding intercom systems (ASBIS) (IEC 62820-3-2:2018); German version EN IEC62820-3-2:2018

23,738円 (本体21,980円)

DIN EN ISO 17892-10:2019

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Directshear tests (ISO 17892-10:2018); German version EN ISO 17892-10:2018

22,550円 (本体20,880円)

DIN EN ISO 19296:2019Mining - Mobile machines working underground - Machine safety (ISO 19296:2018);German version EN ISO 19296:2018

33,307円 (本体30,840円)

DIN EN ISO 23161:2019Soil quality - Determination of selected organotin compounds - Gas-chromatographicmethod (ISO 23161:2018); German version EN ISO 23161:2018

28,036円 (本体25,960円)


DIN 16286:2019 Screw plugs for connections of pressure gauges 7,884円 (本体7,300円)

DIN EN 50401*VDE0848-401:2019

Product standard to demonstrate the compliance of base station equipment withradiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when putinto service; German version EN 50401:2017

8,629円 (本体7,990円)

DIN EN 50566*VDE0848-566:2019

Product standard to demonstrate the compliance of wireless communication deviceswith the basic restrictions and exposure limit values related to human exposure toelectromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held andbody mounted devices in close proximity to the human body; German version EN50566:2017

7,398円 (本体6,850円)

DIN EN 50663*VDE0848-663:2019

Generic standard for assessment of low power electronic and electrical equipmentrelated to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz);German version EN 50663:2017

8,002円 (本体7,410円)

DIN EN IEC 60051-8*VDE 0411-51-8:2019

Direct acting indicating analogue electrical measuring instruments and theiraccessories - Part 8: Special requirements for accessories (IEC 60051-8:2017);German version EN IEC 60051-8:2018

10,033円 (本体9,290円)

DIN EN IEC 61340-4-5*VDE 0300-4-5:2019

Electrostatics - Part 4-5: Standard test methods for specific applications - Methodsfor characterizing the electrostatic protection of footwear and flooring in combinationwith a person (IEC 61340-4-5:2018); German version EN IEC 61340-4-5:2018

10,735円 (本体9,940円)

DIN EN ISO 28927-4:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission -Part 4: Straight grinders (ISO 28927-4:2010 + Amd 1:2017); German version EN ISO28927-4:2010 + A1:2018

25,552円 (本体23,660円)

17 度量衡及び測定．物理的現象




DIN EN ISO 7779:2019Acoustics - Measurement of airborne noise emitted by information technology andtelecommunications equipment (ISO 7779:2018); German version EN ISO 7779:2018

42,465円 (本体39,320円)

DIN IEC/TR 61340-5-2*VDE 0300-5-2:2019

Electrostatics - Part 5-2: Protection of electronic devices from electrostaticphenomena - User guide (IEC TR 61340-5-2:2018)

29,538円 (本体27,350円)


DIN EN 60068-2-10/A1*VDE 0468-2-10/A1:2019

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (IEC60068-2-10:2005/A1:2018); German version EN 60068-2-10:2005/A1:2018

5,076円 (本体4,700円)

DIN EN IEC 60721-2-4*VDE 0468-721-2-4:2019

Classification of environmental conditions - Part 2-4: Environmental conditionsappearing in nature - Solar radiation and temperature (IEC 60721-2-4:2018); Germanversion EN IEC 60721-2-4:2018

9,352円 (本体8,660円)

DIN EN ISO 16371-2:2019

Non-destructive testing - Industrial computed radiography with storage phosphorimaging plates - Part 2: General principles for testing of metallic materials using X-raysand gamma rays (ISO 16371-2:2017, Corrected version 2018-05); German version ENISO 16371-2:2017

28,036円 (本体25,960円)


DIN 16286:2019 Screw plugs for connections of pressure gauges 7,884円 (本体7,300円)

DIN 31652-2Berichtigung 1:2019

Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions -Part 2: Functions for calculation of circular cylindrical bearings; Corrigendum 1

DIN 3760 Berichtigung1:2019

Rotary shaft lip type seals; Corrigendum 1

DIN 5405-2:2019Rolling bearings - Needle roller bearings - Part 2: Thrust needle roller and cageassemblies

12,873円 (本体11,920円)

DIN 5481:2019 Serration splines 25,552円 (本体23,660円)


Machine tools; cardan joints; sizes, connecting dimensions, loading, installation;Corrigendum 1

DIN EN ISO 7091:2019Plain washers - Normal series - Product grade C (ISO 7091:2000); German version ENISO 7091:2000

14,472円 (本体13,400円)

DIN ISO 10129:2019Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricantsunder static conditions (ISO 10129:2017)

12,873円 (本体11,920円)

DIN ISO 15312:2019 Rolling bearings - Thermal speed rating - Calculation (ISO 15312:2018) 17,690円 (本体16,380円)

DIN ISO 6547Berichtigung 1:2019

Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings;dimensions and tolerances; Corrigendum 1

-

-

-

-

21 一般的に利用される機械的システム及びその構成要素


19 試験




DIN ISO 76:2019 Rolling bearings - Static load ratings (ISO 76:2006 + Amd.1:2017) 20,930円 (本体19,380円)


DIN 3535-6:2019Gaskets for gas supply - Part 6: Gasket material based on fibres, graphite orpolytetrafluoroethylene (PTFE) for gas valves, gas appliances and gas mains

12,873円 (本体11,920円)

DIN 4034-1:2019Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 1:Requirements, test methods and marking for drains and sewers in addition to DIN EN1917:2003-04

26,827円 (本体24,840円)

DIN 4034-101:2019Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 101:Evaluation of conformity for drains and sewers in addition to DIN EN 1917:2003-04

9,590円 (本体8,880円)

DIN EN 13445-3/A5:2019

Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2014/A5:2018 24,192円 (本体22,400円)

DIN EN 15655-1:2019Ductile iron pipes, fittings and accessories - Requirements and test methods fororganic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipesand fittings; German version EN 15655-1:2018

20,930円 (本体19,380円)

DIN EN ISO 11299-1:2019

Plastics piping systems for renovation of underground gas supply networks - Part 1:General (ISO 11299-1:2018); German version EN ISO 11299-1:2018

20,930円 (本体19,380円)

DIN EN ISO 11299-2:2019

Plastics piping systems for renovation of underground gas supply networks - Part 2:Lining with continuous pipes (ISO 11299-2:2018); German version EN ISO 11299-2:2018

17,690円 (本体16,380円)

DIN EN ISO 11299-3:2019

Plastics piping systems for renovation of underground gas supply networks - Part 3:Lining with close-fit pipes (ISO 11299-3:2018); German version EN ISO 11299-3:2018

20,930円 (本体19,380円)

DIN EN ISO 13257:2019Thermoplastics piping systems for non-pressure applications - Test method forresistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO13257:2018

16,070円 (本体14,880円)

DIN EN ISO 21012:2019 Cryogenic vessels - Hoses (ISO 21012:2018); German version EN ISO 21012:2018 19,396円 (本体17,960円)


DIN 50940-1:2019Determination of the inhibiting effect of pickling inhibitors - Part 1: Inhibition of theremoval of ferrous materials

16,070円 (本体14,880円)

DIN EN 1011-6:2019Welding - Recommendation for welding of metallic materials - Part 6: Laser beamwelding; German version EN 1011-6:2018

28,036円 (本体25,960円)

DIN EN IEC 61010-2-201*VDE 0411-2-201:2019

Safety requirements for electrical equipment for measurement, control, and laboratoryuse - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017); German version EN IEC 61010-2-201:2018

27,972円 (本体25,900円)

DIN EN ISO 10111:2019Metallic and other inorganic coatings - Measurement of mass per unit area - Review ofgravimetric and chemical analysis methods (ISO 10111:2019); German version EN ISO10111:2019

17,690円 (本体16,380円)

23 一般的に利用される流体システム及びその構成要素


25 生産工学




DIN EN ISO 20601:2019Non-destructive testing of welds - Ultrasonic testing - Use of automated phased arraytechnology for thin-walled steel components (ISO 20601:2018); German version ENISO 20601:2018

22,550円 (本体20,880円)

DIN EN ISO 28927-4:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission -Part 4: Straight grinders (ISO 28927-4:2010 + Amd 1:2017); German version EN ISO28927-4:2010 + A1:2018

25,552円 (本体23,660円)

DIN EN ISO 8504-3:2019Preparation of steel substrates before application of paints and related products -Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018); German version EN ISO 8504-3:2018

16,070円 (本体14,880円)


DIN EN 437:2019 Test gases - Test pressures - Appliance categories; German version EN 437:2018 35,985円 (本体33,320円)

DIN EN 62446-1*VDE0126-23-1:2019

Photovoltaic (PV) systems - Requirements for testing, documentation andmaintenance - Part 1: Grid connected systems - Documentation, commissioning testsand inspection (IEC 62446-1:2016 + A1:2018); German version EN 62446-1:2016 +A1:2018

18,273円 (本体16,920円)


DIN EN 50318*VDE0115-504:2019

Railway applications - Current collection systems - Validation of simulation of thedynamic interaction between pantograph and overhead contact line; German versionEN 50318:2018

29,538円 (本体27,350円)

DIN EN 60811-501*VDE0473-811-501:2019

Electric and optical fibre cables - Test methods for non-metallic materials - Part 501:Mechanical tests - Tests for determining the mechanical properties of insulating andsheathing compounds (IEC 60811-501:2012 + A1:2018); German version EN 60811-501:2012 + A1:2018

10,735円 (本体9,940円)

DIN EN 62612:2019

Self-ballasted LED lamps for general lighting services with supply voltages > 50 V -Performance requirements (IEC 62612:2013 + A1:2015 + COR1:2016 + A2:2018);German version EN 62612:2013 + AC:2016 + A1:2017 + A11:2017 + A11:2017/AC:2017+ A2:2018

38,491円 (本体35,640円)

DIN EN IEC 60034-14*VDE 0530-14:2019

Rotating electrical machines - Part 14: Mechanical vibration of certain machines withshaft heights 56 mm and higher - Measurement, evaluation and limits of vibrationseverity (IEC 60034-14:2018); German version EN IEC 60034-14:2018

10,735円 (本体9,940円)

DIN EN IEC 60034-27-1*VDE 0530-27-1:2019

Rotating electrical machines - Part 27-1: Off-line partial discharge measurements onthe stator winding insulation of rotating electrical machines (IEC 60034-27-1:2017);German version EN IEC 60034-27-1:2018

22,852円 (本体21,160円)

DIN EN IEC 60034-27-4*VDE 0530-27-4:2019

Rotating electrical machines - Part 27-4: Measurement of insulation resistance andpolarization index on winding insulation of rotating electrical machines (IEC 60034-27-4:2018); German version EN IEC 60034-27-4:2018

17,182円 (本体15,910円)

DIN EN IEC 61800-3*VDE 0160-103:2019

Adjustable speed electrical power drive systems - Part 3: EMC requirements andspecific test methods (IEC 61800-3:2017); German version EN IEC 61800-3:2018

37,627円 (本体34,840円)

DIN EN IEC 62040-2*VDE 0558-520:2019

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC)requirements (IEC 62040-2:2016); German version EN IEC 62040-2:2018

20,282円 (本体18,780円)

DIN EN IEC 62386-221*VDE 0712-0-221:2019

Digital addressable lighting interface - Part 221: Particular requirements for controlgear - Demand Response (device type 20) (IEC 62386-221:2018); German version ENIEC 62386-221:2018

10,033円 (本体9,290円)

27 エネルギー及び熱伝達工学


29 電気工学




DIN EN IEC 62442-2*VDE 0712-29:2019

Energy performance of lamp controlgear - Part 2: Controlgear for high intensitydischarge lamps (excluding fluorescent lamps) - Method of measurement to determinethe efficiency of controlgear (IEC 62442-2:2018); German version EN IEC 62442-2:2018 + AC:2018

9,352円 (本体8,660円)

DIN EN IEC 62485-2*VDE 0510-485-2:2019

Safety requirements for secondary batteries and battery installations - Part 2:Stationary batteries (IEC 62485-2:2010); German version EN IEC 62485-2:2018

17,182円 (本体15,910円)

DIN EN IEC 62485-4*VDE 0510-485-4:2019

Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in portable appliances (IEC 62485-4:2015);German version EN IEC 62485-4:2018

9,352円 (本体8,660円)

DIN EN IEC 63093-5:2019

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part5: EP-cores and associated parts for use in inductors and transformers (IEC 63093-5:2018); German version EN IEC 63093-5:2018

22,550円 (本体20,880円)

DIN EN IEC 63093-6:2019

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part6: ETD-cores for use in power supplies (IEC 63093-6:2018); German version EN IEC63093-6:2018

25,552円 (本体23,660円)

DIN EN IEC 63093-8:2019

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part8: E-cores (IEC 63093-8:2018); German version EN IEC 63093-8:2018

25,552円 (本体23,660円)

DIN EN IEC 63093-11:2019

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part11: EC-cores for use in power supply applications (IEC 63093-11:2018); Germanversion EN IEC 63093-11:2018

24,192円 (本体22,400円)

DIN VDE 0212-434*VDE0212-434:2019

Fittings for overhead lines - Part 434: Turnbuckles 7,398円 (本体6,850円)




5,076円 (本体4,700円)



3,164円 (本体2,930円)

DIN EN IEC 60286-5:2019

Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2018); German version EN IEC 60286-5:2018

29,419円 (本体27,240円)

DIN EN IEC 60297-3-110*VDE 0687-297-3-110:2019

Mechanical structures for electrical and electronic equipment - Dimensions ofmechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racksand cabinets for smart houses (IEC 60297-3-110:2018); German version EN IEC60297-3-110:2018

11,437円 (本体10,590円)

DIN EN IEC 62435-6*VDE 0884-135-6:2019

Electronic components - Long-term storage of electronic semiconductor devices -Part 6: Packaged or finished devices (IEC 62435-6:2018); German version EN IEC62435-6:2018

11,437円 (本体10,590円)

DIN EN IEC 62610-2:2019

Mechanical structures for electrical and electronic equipment - Thermal managementfor cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method forthe determination of forced air cooling (IEC 62610-2:2018); German version EN IEC62610-2:2018

24,192円 (本体22,400円)

DIN IEC/TR 61340-5-2*VDE 0300-5-2:2019

Electrostatics - Part 5-2: Protection of electronic devices from electrostaticphenomena - User guide (IEC TR 61340-5-2:2018)

29,538円 (本体27,350円)

31 エレクトロニクス





DIN EN 300698:2019

Radio telephone transmitters and receivers for the maritime mobile service operating inthe VHF bands used on inland waterways - Harmonised Standard for access to radiospectrum and for features for emergency services (Endorsement of the English versionEN 300 698 V2.3.1 (2018-11) as a German standard)

3,758円 (本体3,480円)

DIN EN 300700:2019Digital Enhanced Cordless Telecommunications (DECT) - Wireless Relay Station (WRS)(Endorsement of the English version EN 300 700 V2.2.1 (2018-12) as a Germanstandard)

3,758円 (本体3,480円)

DIN EN 300743:2019Digital Video Broadcasting (DVB) - Subtitling systems (Endorsement of the Englishversion EN 300 743 V1.6.1 (2018-10) as a German standard)

3,758円 (本体3,480円)

DIN EN 50401*VDE0848-401:2019

Product standard to demonstrate the compliance of base station equipment withradiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when putinto service; German version EN 50401:2017

8,629円 (本体7,990円)

DIN EN 50566*VDE0848-566:2019

Product standard to demonstrate the compliance of wireless communication deviceswith the basic restrictions and exposure limit values related to human exposure toelectromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held andbody mounted devices in close proximity to the human body; German version EN50566:2017

7,398円 (本体6,850円)

DIN EN 50663*VDE0848-663:2019

Generic standard for assessment of low power electronic and electrical equipmentrelated to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz);German version EN 50663:2017

8,002円 (本体7,410円)

DIN EN 55016-1-6*VDE0876-16-1-6:2019

Specification for radio disturbance and immunity measuring apparatus and methods -Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antennacalibration (CISPR 16-1-6:2014 + A1:2017); German version EN 55016-1-6:2015 +A1:2017

46,915円 (本体43,440円)

DIN EN 61000-4-39*VDE 0847-4-39:2019

Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurementtechniques - Radiated fields in close proximity - Immunity test (IEC 61000-4-39:2017);German version EN 61000-4-39:2017

18,273円 (本体16,920円)

DIN EN IEC 60793-1-45*VDE 0888-245:2019

Optical fibres - Part 1-45: Measurement methods and test procedures - Mode fielddiameter (IEC 60793-1-45:2017); German version EN IEC 60793-1-45:2018

14,806円 (本体13,710円)

DIN EN IEC 60793-1-54*VDE 0888-254:2019

Optical fibres - Part 1-54: Measurement methods and test procedures - Gammairradiation (IEC 60793-1-54:2018); German version EN IEC 60793-1-54:2018

9,352円 (本体8,660円)

DIN EN IEC 61290-4-4:2019

Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Singlechannel optical amplifiers with gain control (IEC 61290-4-4:2018); German version ENIEC 61290-4-4:2018

20,930円 (本体19,380円)

DIN EN IEC 61800-3*VDE 0160-103:2019

Adjustable speed electrical power drive systems - Part 3: EMC requirements andspecific test methods (IEC 61800-3:2017); German version EN IEC 61800-3:2018

37,627円 (本体34,840円)

DIN EN IEC 62040-2*VDE 0558-520:2019

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC)requirements (IEC 62040-2:2016); German version EN IEC 62040-2:2018

20,282円 (本体18,780円)

DIN EN ISO 13766-1:2019

Earth-moving and building construction machinery - Electromagnetic compatibility(EMC) of machines with internal electrical power supply - Part 1: General EMCrequirements under typical electromagnetic environmental conditions (ISO 13766-1:2018); German version EN ISO 13766-1:2018

30,693円 (本体28,420円)


42,465円 (本体39,320円)

33 電気通信工学．オーディオ及びビデオ工学





DIN EN IEC 62386-221*VDE 0712-0-221:2019

Digital addressable lighting interface - Part 221: Particular requirements for controlgear - Demand Response (device type 20) (IEC 62386-221:2018); German version ENIEC 62386-221:2018

10,033円 (本体9,290円)

DIN EN ISO 19115-2:2019

Geographic information - Metadata - Part 2: Extensions for acquisition and processing(ISO 19115-2:2019); English version EN ISO 19115-2:2019

35,985円 (本体33,320円)


42,465円 (本体39,320円)


DIN EN 60601-2-43*VDE 0750-2-43:2019

Medical electrical equipment - Part 2-43: Particular requirements for the basic safetyand essential performance of X-ray equipment for interventional procedures (IEC60601-2-43:2010 + A1:2017); German version EN 60601-2-43:2010 + A1:2018

23,738円 (本体21,980円)


DIN EN IEC 60809Berichtigung 1:2019

Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC60809:2014 + A1:2017 + A2:2017); German version EN 60809:2015 + A1:2017 + EN IEC60809:2015/A2:2018; Corrigendum 1

DIN EN ISO 14469Berichtigung 1:2019

Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017);German version EN ISO 14469:2017; Corrigendum 1


DIN EN 16186-1:2019Railway applications - Driver's cab - Part 1: Anthropometric data and visibility; Germanversion EN 16186-1:2014+A1:2018

20,930円 (本体19,380円)

DIN EN 50318*VDE0115-504:2019

Railway applications - Current collection systems - Validation of simulation of thedynamic interaction between pantograph and overhead contact line; German versionEN 50318:2018

29,538円 (本体27,350円)


DIN EN 300698:2019

Radio telephone transmitters and receivers for the maritime mobile service operating inthe VHF bands used on inland waterways - Harmonised Standard for access to radiospectrum and for features for emergency services (Endorsement of the English versionEN 300 698 V2.3.1 (2018-11) as a German standard)

3,758円 (本体3,480円)

DIN EN IEC 62923-2:2019

Maritime navigation and radiocommunication equipment and systems - Bridge alertmanagement - Part 2: Alert and cluster identifiers and other additional features (IEC62923-2:2018); English version EN IEC 62923-2:2018

24,192円 (本体22,400円)

DIN EN ISO 11812:2019Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001);German version EN ISO 11812:2018

29,419円 (本体27,240円)

-

-

35 情報技術．事務機械


45 鉄道工学


47 造船及び海洋構造物


37 映像技術


43 自動車工学




DIN EN ISO 12215-4:2019

Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing(ISO 12215-4:2002); German version EN ISO 12215-4:2018

19,396円 (本体17,960円)

DIN EN ISO 12216:2019Small craft - Windows, portlights, hatches, deadlights and doors - Strength andwatertightness requirements (ISO 12216:2002); German version EN ISO 12216:2018

38,491円 (本体35,640円)

DIN EN ISO 15083:2019Small craft - Bilge-pumping systems (ISO 15083:2003); German version EN ISO15083:2018

17,690円 (本体16,380円)

DIN EN ISO 16147:2019Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electricalcomponents (ISO 16147:2018); German version EN ISO 16147:2018

14,472円 (本体13,400円)

DIN EN ISO 8469:2019Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013); German version EN ISO8469:2018

17,690円 (本体16,380円)

DIN EN ISO 9093-1:2019Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994);German version EN ISO 9093-1:2018

16,070円 (本体14,880円)

DIN EN ISO 9093-2:2019Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002); German version EN ISO 9093-2:2018

17,690円 (本体16,380円)


DIN EN 16603-10-02:2019

Space engineering - Verification; English version EN 16603-10-02:2018 30,693円 (本体28,420円)

DIN EN 16603-20-20:2019

Space engineering - Electrical design and interface requirements for power supply;English version EN 16603-20-20:2018

37,152円 (本体34,400円)

DIN EN 4730:2019Aerospace series - Anthropometric dimensioning of aircraft seats; German and Englishversion EN 4730:2018

29,419円 (本体27,240円)



Cranes; flanged crane rail wheels, with plain bearings, with gear wheel; Corrigendum 1


Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel;Corrigendum 1


Cranes; evaluating of cardan shafts for travelling drives; Corrigendum 1

DIN EN ISO 13766-1:2019

Earth-moving and building construction machinery - Electromagnetic compatibility(EMC) of machines with internal electrical power supply - Part 1: General EMCrequirements under typical electromagnetic environmental conditions (ISO 13766-1:2018); German version EN ISO 13766-1:2018

30,693円 (本体28,420円)


33,307円 (本体30,840円)

-

-

-

49 航空宇宙工学


53 荷役設備




DIN EN ISO 21183-2:2019

Light conveyor belts - Part 2: List of equivalent terms (ISO 21183-2:2018); Germanversion EN ISO 21183-2:2018

24,192円 (本体22,400円)


DIN 55508-2:2019 Packaging test - Leakage test on flexible packagings - Part 2: Color method 9,590円 (本体8,880円)

DIN 55543-6:2019Packaging test - Test methods for packaging films - Part 6: Determination ofgrammage

9,590円 (本体8,880円)

DIN EN 17177:2019Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap; Germanversion EN 17177:2019

11,167円 (本体10,340円)

DIN EN IEC 60286-5:2019

Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2018); German version EN IEC 60286-5:2018

29,419円 (本体27,240円)


DIN EN ISO 12957-1:2019

Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test(ISO 12957-1:2018); German version EN ISO 12957-1:2018

17,690円 (本体16,380円)

DIN EN ISO 17226-1:2019

Leather - Chemical determination of formaldehyde content - Part 1: Method using highperformance liquid chromatography (ISO 17226-1:2018); German version EN ISO17226-1:2019

16,070円 (本体14,880円)

DIN EN ISO 17226-2:2019

Leather - Chemical determination of formaldehyde content - Part 2: Method usingcolorimetric analysis (ISO 17226-2:2018); German version EN ISO 17226-2:2019

16,070円 (本体14,880円)

DIN EN ISO 5398-4:2019Leather - Chemical determination of chromic oxide content - Part 4: Quantification byinductively coupled plasma (ICP) (ISO 5398-4:2018); German version EN ISO 5398-4:2019

16,070円 (本体14,880円)


DIN EN IEC 61340-4-5*VDE 0300-4-5:2019


10,735円 (本体9,940円)


DIN EN ISO 4254-9:2019Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018); Germanversion EN ISO 4254-9:2018

22,550円 (本体20,880円)

65 農業



59 繊維及び皮革技術


61 被服工業


55 包装及び物流




DIN 10518:2019Food hygiene - Production and dispense of non-prepacked ice cream and soft icecream to the consumer - Hygiene requirements, testing

16,070円 (本体14,880円)

DIN 10541:2019 Food Hygiene - Milk vending machines - Hygiene requirements 17,690円 (本体16,380円)


DIN 28033:2019 Flange joints for process vessels - Weld flanges for pressure vessels 20,930円 (本体19,380円)

DIN 51007:2019Thermal analysis - Differential thermal analysis (DTA) and differential scanningcalorimetry (DSC) - General Principles

22,550円 (本体20,880円)



33,307円 (本体30,840円)


DIN 51380:2019Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gaschromatography method

9,590円 (本体8,880円)

DIN 51631:2019 Mineral spirits - Special boiling point spirits - Requirements 7,884円 (本体7,300円)

DIN 51635:2019 Mineral spirits - FAM standard mineral spirit - Requirements 7,884円 (本体7,300円)

DIN EN ISO 11299-1:2019

Plastics piping systems for renovation of underground gas supply networks - Part 1:General (ISO 11299-1:2018); German version EN ISO 11299-1:2018

20,930円 (本体19,380円)

DIN EN ISO 11299-2:2019

Plastics piping systems for renovation of underground gas supply networks - Part 2:Lining with continuous pipes (ISO 11299-2:2018); German version EN ISO 11299-2:2018

17,690円 (本体16,380円)

DIN EN ISO 11299-3:2019

Plastics piping systems for renovation of underground gas supply networks - Part 3:Lining with close-fit pipes (ISO 11299-3:2018); German version EN ISO 11299-3:2018

20,930円 (本体19,380円)

DIN EN ISO 16380:2019Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd1:2016); German version EN ISO 16380:2018

30,693円 (本体28,420円)

DIN EN ISO 20023:2019Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of woodpellets in residential and other small-scale applications (ISO 20023:2018); Germanversion EN ISO 20023:2018

34,538円 (本体31,980円)


67 食品技術


75 石油及び関連技術


71 化学技術


73 鉱採及び鉱物




DIN EN 1563:2019 Founding - Spheroidal graphite cast irons; German version EN 1563:2018 29,419円 (本体27,240円)

DIN EN ISO 204:2019Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2018);German version EN ISO 204:2018

35,985円 (本体33,320円)

DIN EN ISO 683-3:2019Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardeningsteels (ISO 683-3:2019); German version EN ISO 683-3:2019

26,827円 (本体24,840円)


DIN 4072:2019 Boards tongued and grooved made of coniferous timber 9,590円 (本体8,880円)

DIN 68119:2019 Wood shingles 14,472円 (本体13,400円)

DIN EN 13756:2019 Wood flooring and parquet - Terminology; Trilingual version EN 13756:2018 38,491円 (本体35,640円)


DIN 4862:2019Testing of ceramic raw and basic materials - Acid pressure digestion of ash residuesafter combustion of carbon and graphite materials

14,472円 (本体13,400円)

DIN 4865:2019Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of short fiber reinforced ceramic composites at room temperature -Determination of flexural strength

14,472円 (本体13,400円)


DIN 55543-6:2019Packaging test - Test methods for packaging films - Part 6: Determination ofgrammage

9,590円 (本体8,880円)

DIN EN ISO 21012:2019 Cryogenic vessels - Hoses (ISO 21012:2018); German version EN ISO 21012:2018 19,396円 (本体17,960円)

DIN EN ISO 21970-1:2019

Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designationsystem and basis for specifications (ISO 21970-1:2018); German version EN ISO21970-1:2018

17,690円 (本体16,380円)

DIN EN ISO 21970-2:2019

Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation oftest specimens and determination of properties (ISO 21970-2:2018); German versionEN ISO 21970-2:2018

17,690円 (本体16,380円)

DIN EN ISO 2818:2019Plastics - Preparation of test specimens by machining (ISO 2818:2018); Germanversion EN ISO 2818:2019

20,930円 (本体19,380円)


81 ガラス及びセラミック工業


77 金属工学


79 木材工業


83 ゴム及びプラスチック工業



DIN EN ISO 294-4:2019Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4:Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019

17,690円 (本体16,380円)


DIN 5014:2019 Testing of paper and board - Compressive strength of an in s-shape fixed sample 12,873円 (本体11,920円)

DIN EN ISO 7263-1:2019Corrugating medium - Determination of the flat crush resistance after laboratoryfluting - Part 1: A-flute (ISO 7263-1:2018); German version EN ISO 7263-1:2019

19,396円 (本体17,960円)

DIN EN ISO 7263-2:2019Corrugating medium - Determination of the flat crush resistance after laboratoryfluting - Part 2: B-flute (ISO 7263-2:2018); German version EN ISO 7263-2:2019

19,396円 (本体17,960円)

DIN ISO 11475:2019Paper and board - Determination of CIE whiteness, D65/10ｰ (outdoor daylight) (ISO11475:2017)

19,396円 (本体17,960円)


DIN 55952:2019 Binders for paints and varnishes - Cellulose ethers - Testing 16,070円 (本体14,880円)

DIN 55953:2019 Binders for paints and varnishes - Cellulose esters of organic acids - Testing 14,472円 (本体13,400円)

DIN EN 16985:2019Spray booths for organic coating material - Safety requirements; German version EN16985:2018

44,928円 (本体41,600円)

DIN EN ISO 15110:2019Paints and varnishes - Artificial weathering including acidic deposition (ISO15110:2017); German version EN ISO 15110:2017

20,930円 (本体19,380円)


DIN 18181:2019 Gypsum plasterboards for building construction - Application 16,070円 (本体14,880円)

DIN 18555-4:2019Testing of mortars containing mineral binders - Part 4: Determination of linear andtransverse strain and of deformation characteristics of hardened masonry mortars bythe static pressure test

11,167円 (本体10,340円)

DIN 18555-7:2019Testing of mortars with mineral binders - Part 7: Determination of the water retentionvalue of fresh mortars by the filter plate method

9,590円 (本体8,880円)

DIN 18555-9:2019Testing of mortars containing mineral binders - Part 9: Determination of thecompressive strength of hardened mortars in the bed joint

14,472円 (本体13,400円)

DIN EN 13141-1:2019Ventilation for buildings - Performance testing of components/products for residentialventilation - Part 1: Externally and internally mounted air transfer devices; Germanversion EN 13141-1:2019

20,930円 (本体19,380円)

85 紙・パルプ工業


87 塗料及び色材工業


91 建設材料及び建築物




DIN EN 13454-2:2019Binders for floor screeds based on calcium sulphate - Part 2: Test methods; Germanversion EN 13454-2:2019

19,396円 (本体17,960円)

DIN EN 14064-1:2019Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW)products - Part 1: Specification for the loose-fill products before installation; Germanversion EN 14064-1:2018

33,307円 (本体30,840円)

DIN EN 16140:2019Natural stone test methods - Determination of sensitivity to changes in appearanceproduced by thermal cycles; German version EN 16140:2019

17,690円 (本体16,380円)

DIN EN 17146:2019Determination of the strength of infill supports - Test method and requirements;German version EN 17146:2018

20,930円 (本体19,380円)

DIN EN 1991-1-3/NA:2019

National Annex - Nationally determined parameters - Eurocode 1: Actions onstructures - Part 1-3: General actions - Snow loads

19,396円 (本体17,960円)

DIN EN 1992-4/NA:2019National Annex - Nationally determined parameters - Eurocode 2: Design of concretestructures - Part 4: Design of fastenings for use in concrete

11,167円 (本体10,340円)

DIN EN 1992-4:2019Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use inconcrete; German version EN 1992-4:2018

52,617円 (本体48,720円)

DIN EN 437:2019 Test gases - Test pressures - Appliance categories; German version EN 437:2018 35,985円 (本体33,320円)

DIN EN ISO 13257:2019Thermoplastics piping systems for non-pressure applications - Test method forresistance to elevated temperature cycling (ISO 13257:2018); German version EN ISO13257:2018

16,070円 (本体14,880円)


DIN 4034-1:2019Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 1:Requirements, test methods and marking for drains and sewers in addition to DIN EN1917:2003-04

26,827円 (本体24,840円)

DIN 4034-101:2019Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 101:Evaluation of conformity for drains and sewers in addition to DIN EN 1917:2003-04

9,590円 (本体8,880円)

DIN EN 13146-1:2019Railway applications - Track - Test methods for fastening systems - Part 1:Determination of longitudinal rail restraint; German version EN 13146-1:2019

16,070円 (本体14,880円)

DIN EN 13146-7:2019Railway applications - Track - Test methods for fastening systems - Part 7:Determination of clamping force and uplift stiffness; German version EN 13146-7:2019

14,472円 (本体13,400円)

DIN EN 16907-1:2019 Earthworks - Part 1: Principles and general rules; German version EN 16907-1:2018 72,338円 (本体66,980円)

DIN EN 16907-2:2019 Earthworks - Part 2: Classification of materials; German version EN 16907-2:2018 29,419円 (本体27,240円)

DIN EN 16907-3:2019 Earthworks - Part 3: Construction procedures; German version EN 16907-3:2018 49,183円 (本体45,540円)

DIN EN 16907-4:2019Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders; German versionEN 16907-4:2018

44,928円 (本体41,600円)

93 土木工学




DIN EN 16907-5:2019 Earthworks - Part 5: Quality control; German version EN 16907-5:2018 19,396円 (本体17,960円)

DIN EN 16907-6:2019Earthworks - Part 6: Land reclamation earthworks using dredged hydraulic fill; Germanversion EN 16907-6:2018

32,097円 (本体29,720円)

DIN EN ISO 17892-10:2019

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Directshear tests (ISO 17892-10:2018); German version EN ISO 17892-10:2018

22,550円 (本体20,880円)


DIN EN 1022:2019 Furniture - Seating - Determination of stability; German version EN 1022:2018 28,036円 (本体25,960円)

DIN EN 1335-2:2019Office furniture - Office work chair - Part 2: Safety requirements; German version EN1335-2:2018

12,873円 (本体11,920円)

DIN EN 14836:2019Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test methodfor artificial weathering; German version EN 14836:2018

14,472円 (本体13,400円)

DIN EN 17142:2019Modular multilayer floor coverings - Elements with a wood powder based surface layer- Specifications, requirements and test methods; German version EN 17142:2018

29,419円 (本体27,240円)

DIN EN 17164:2019Climbing/bouldering walls for use in the water area of swimming pools of public use -Safety and operational requirements; German version EN 17164:2018

17,690円 (本体16,380円)

DIN EN 913:2019Gymnastic equipment - General safety requirements and test methods; Germanversion EN 913:2018

22,550円 (本体20,880円)

DIN EN 959:2019Mountaineering equipment - Rock anchors - Safety requirements and test methods;German version EN 959:2018

17,690円 (本体16,380円)

DIN EN IEC 61340-4-5*VDE 0300-4-5:2019


10,735円 (本体9,940円)

DIN EN IEC 62820-3-2*VDE 0830-91-3-2:2019

Building intercom systems - Part 3-2: Application guidelines - Advanced securitybuilding intercom systems (ASBIS) (IEC 62820-3-2:2018); German version EN IEC62820-3-2:2018

23,738円 (本体21,980円)

97 家庭用及び商業用装置．娯楽．スポーツ



注文書年月日

【お申込み先】ご記入の上、ＦＡＸにてお申込みください。

※有料会員の方は、JSA Webdesk（https://webdesk.jsa.or.jp/）からお申込みください。

日本規格協会グループ販売ｻｰﾋﾞｽﾁｰﾑ FAX ：03-4231-8665 /TEL：03-4231-8550

（ふりがな）【貴社名】

【ご住所】（〒－）都・道府・県

【ご担当部署名】

【TEL】（日中連絡の取れる番号）

（ふりがな）【ご担当者名】

【FAX】

お支払い方法

請求書を商品に同封・振込

（振込手数料はお客様ご負担にてお願いいたします。）

お支払い期限

請求書記載の日付から 60日以内に

お振込みください。

JSA-ID（不明の場合は空欄で結構です）

言語※1 規格番号若しくは書籍タイトル（ISBNコード）年号※2 部数金額

【通信欄】

(2018-12)

※1 言語の欄にご指定がない場合は原則として原文（ＪＩＳは和文、海外規格は英語等）を納品いたします。

※2 旧版、廃止規格をご希望の場合はその旨ご記入下さい。（ご指定のない場合は原則として最新版を納品いたします。）

※3 商品の返品・交換は、乱丁、落丁がある場合を除き、原則お受けできませんので予めご了承下さい。

※4 送付手数料は、ご注文の部数にかかわらず、１回のご注文につき一律500円(税込・8%時)申受けます。

ただし、ご予約対象商品につきましては、発送毎に送料を申受けます。

(送付手数料は変更になる場合がございます。時間指定、航空便等の特別なご指定がある場合は、実費の送付手数料をご請求いたします。)

※5 PDF版のご購入は、JSA Webdesk (https://webdesk.jsa.or.jp)をご利用下さい。（PDF版のお取扱いがない商品もございます。）

※6 ご記入いただいた個人情報に基づき、日本規格協会グループから各種ご案内を送付させていただく場合がございます。詳細は個人情報

保護方針（https://www.jsa.or.jp/other/privacy/）をご覧ください。

※7 規格類は価格が変更される場合がございます。

https://webdesk.jsa.or.jp/

https://www.jsa.or.jp/other/privacy/

DIN規格 --- 2019-04月新刊情報

Documents

Transcript of DIN規格 --- 2019-04月新刊情報

DIN規格 --- 2019-04月 新刊情報

Documents

Transcript of DIN規格 --- 2019-04月 新刊情報

DIN規格 --- 2019-04月新刊情報

Transcript of DIN規格 --- 2019-04月新刊情報