DimVar

download DimVar

of 4

Transcript of DimVar

  • 7/27/2019 DimVar

    1/4

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    REFERENCE

    MATERIALS

    Dimension VariablesThe ollowing list shows the AutoCAD dimension variables that can be

    stored within a drawing or template fle. The value o each o these variables iswritten into the fle when the drawing is saved, so the next time the drawingis opened, the values remain the same. Although the easiest way to set thesevariables is to use the Dimension Style Manager, the values or most o thevariables can also be set by entering the variable name or by using the SETVARtool. Some variable values are derived by AutoCAD rom the current condition

    o the drawing or the drawing environment, and cannot be set directly. Theseare reerred to as read-only variables.

    The ollowing list provides a brie description o the system variable andthe deault setting when no specifc drawing is reerenced. The symbol ( )indicates that the variable is read-only.

    VariableName DefaultValue Description

    DIMADEC 0 Controls the number o decimal places or angular dimensions.

    DIMALT Off Enables or disables alternate units dimensioning.

    DIMALTD (imperial) or Controls decimal places or alternate units dimensions. 3 (metric)

    DIMALTF 5.4000 Alternate units dimension scale actor.

    DIMALTRND 0.0000 Rounding value or alternate dimension units.

    DIMALTTD (imperial) or Decimal places or alternate units tolerance values. 3 (metric)

    DIMALTTZ 0 Zero suppression or alternate units tolerance values.

    DIMALTU Units ormat or alternate units dimensions.

    DIMALTZ 0 Zero suppression or alternate units dimension values.

    DIMANNO Tells i the dimension style is annotative.DIMAPOST Preix/suix or alternate units dimensions.

    DIMARCSYM 0 Displays arc symbols in arc length dimensions.

    DIMASSOC Controls associative dimensioning.

    DIMASZ 0.800 Dimension line and arrowhead size.

    DIMATFIT 3 Controls placement o text and arrowheads when there is insu-icient space between the extension lines.

    Copyright by Goodheart-Willcox Co., Inc. Dimension Variables, page

  • 7/27/2019 DimVar

    2/4

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    REFERENCE

    MATERIALS

    VariableName DefaultValue Description

    DIMAUNIT 0 Unit ormat or angular dimension values.

    DIMAZIN 0 Controls zero suppression or angular dimensions.

    DIMBLK Block type to use or both arrowheads.

    DIMBLK1 Block type to use or irst arrowhead.

    DIMBLK2 Block type to use or second arrowhead.

    DIMCEN 0.0900 (imperial) Controls placement o center marks or centerlines.or .5000 (metric)

    DIMCLRD 0 Dimension line, arrowhead, and leader line color.

    DIMCLRE 0 Dimension extension line color.

    DIMCLRT 0 Dimension text color.

    DIMCONSTRAINTICON 3 Determines whether the lock icon displays next to dimensionalconstraint text.

    DIMDEC 4 (imperial) or Decimal places or dimension values. (metric)

    DIMDLE 0.0000 Dimension line extension beyond extension lines.

    DIMDLI 0.3800 (imperial) Incremental spacing between baseline dimensions.or 3.7500 (metric)

    DIMDSEP . (period, imperial) Speciies a single character to use as a decimal separatoror , (comma, or decimal unit dimensions.metric)

    DIMEXE 0.800 (imperial) Extension line distance beyond dimension line.or .500 (metric)

    DIMEXO 0.065 (imperial) Distance rom origin points to extension lines.or 0.650 (metric)

    DIMFRAC 0 Controls the raction ormat used or architectural andractional dimensions.

    DIMFXL .0000 Length o extension lines between dimension line and dimen-sion origin.

    DIMFXLON Off Sets extension lines to a ixed length.

    DIMGAP 0.0900 (imperial) Gap size between dimension line and dimension text.or 0.650 (metric)

    DIMJOGANG 45 Angle o the transverse segment o a jogged radius dimension.

    DIMJUST 0 Horizontal justiication o dimension text.

    DIMLDRBLK Controls the type o arrowhead used or leaders.

    DIMLFAC .0000 Scale actor or linear dimension values.

    Copyright by Goodheart-Willcox Co., Inc. Dimension Variables, page

  • 7/27/2019 DimVar

    3/4

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    REFERENCE

    MATERIALS

    VariableName DefaultValue DescriptionDIMLIM Off Toggles creation o limits-style dimension text.

    DIMLTEX1 First extension lines linetype.

    DIMLTEX2 Second extension lines linetype.

    DIMLTYPE Sets a dimension lines linetype.

    DIMLUNIT Speciies units or all nonangular dimensions.

    DIMLWD - Lineweight value or dimension lines.

    DIMLWE - Lineweight value or extension lines.

    DIMPOST (none) Preix/suix or primary units dimension values.

    DIMRND 0.0000 Rounding value or dimensions.

    DIMSAH Off Toggles appearance o arrowhead blocks.

    DIMSCALE .0000 Global dimension eature scale actor.

    DIMSD1 Off Toggles suppression o irst dimension line.

    DIMSD2 Off Toggles suppression o second dimension line.

    DIMSE1 Off Toggles suppression o irst extension line.

    DIMSE2 Off Toggles suppression o second extension line.

    DIMSOXD Off Suppresses dimension lines outside extension lines.

    DIMSTYLE

    Name o current dimension style.DIMTAD 0 (imperial) or Sets text placement relative to dimension line.

    (metric)

    DIMTDEC 4 (imperial) or Decimal places or primary units tolerance values. (metric)

    DIMTFAC .0000 Scale actor or ractional or tolerance text size.

    DIMTFILL 0 Changes background o dimension text.

    DIMTFILLCLR 0 Changes color or text background in dimensions.

    DIMTIH On (imperial) or Orientation o text inside extension lines. Off (metric)

    DIMTIX Off Toggles orced placement o text between extension lines.

    DIMTM 0.0000 Lower tolerance value or tolerance dimensions.

    DIMTMOVE 0 Controls the ormat o dimension text when it is moved.

    DIMTOFL Off (imperial) or Toggles orced dimension line creation. On (metric)

    DIMTOH On (imperial) or Orientation o text outside extension lines. Off (metric)

    Copyright by Goodheart-Willcox Co., Inc. Dimension Variables, page 3

  • 7/27/2019 DimVar

    4/4

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    AutoCADand Its Applications

    B A S I C SStudent Web Site

    REFERENCE

    MATERIALS

    VariableName DefaultValue DescriptionDIMTOL (imperial) or Toggles creation o appended tolerance dimensions. 0 (metric)

    DIMTOLJ Vertical justiication or dimension tolerance text.

    DIMTP 0.0000 Upper tolerance value or tolerance dimensions.

    DIMTSZ 0.0000 Controls size o dimension line tick marks drawn insteado arrowheads.

    DIMTVP 0.0000 Vertical position o text above or below dimension line.

    DIMTXSTY Standard Text style used or dimension text.

    DIMTXT 0.800 (imperial) Size o dimension text.or .5000 (metric)

    DIMTXTDIRECTION 0 Controls the reading direction o dimension text.

    DIMTZIN 0 (imperial) or Zero suppression or primary units tolerance values. 8 (metric)

    DIMUPT Off Controls user placement o dimension line and text.

    DIMZIN 0 (imperial) or Zero suppression or primary units dimensions. 8 (metric)

    Copyright by Goodheart-Willcox Co., Inc. Dimension Variables, page 4