Digsi4 Catalog Sip-2006 En
Transcript of Digsi4 Catalog Sip-2006 En
Function overview
Description
Siemens SIP · 2006
3 Operating Program / DIGSI 4
3
3/3
• Device administration in projects withfreely configurable hierarchies for anysubstation and electrical power stationtopology
• Import and export of parameter sets
• Full use of the great flexibility of thePLC (Programmable Logic Controller)without any programming skills
• Modify the default and single-linediagram displays preset in the factorywith the Display Editor – just like aconventional image editor
• Precise fault analysis with SIGRA: visu-alization of fault records in curves overtime, circle diagrams, vectordiagrams, and bar charts
• Innovative I/O configuration in aclearly structured matrix
• Intelligent plausibility checks rule outincorrect input
• Graphical visualization of characteris-tics and zone diagrams with directmanipulation of the curves
• Password-protected access for differentjobs such as parameter setting,commissioning and controlling(authorized staff only)
• Testing and diagnostic functions –decisive support in the commissioningphase
• Direct operation via serial port, remoteoperation via modem
• Field bus communication viaIEC 61850 protocolIEC 60870-5-103 protocol andPROFIBUS-FMS protocol
Hardware requirements
• Pentium with 800 MHz processor
• 500 Mbyte of free hard disk space
• 128 Mbyte of RAM (256 Mbyte recom-mended)
• CD-ROM Drive / DVD-ROM Drive
• Pointer device (i.e. mouse)
• Serial port (COM)
• USB port
Software requirements
• MS Windows 2000 / XP ProfessionalEdition
DIGSI 4One Software for all SIPROTEC Protection Relays
DIGSI is a familiar trade name alreadytoday. Originally launched as an MS-DOSsoftware, DIGSI, in its third version, wasdeveloped to become a convenient tool forsetting numerical protection relays underMS Windows. DIGSI 4 now is the logical in-novation for easy-to-use and user-friendlysetting, commissioning and operation of allSIPROTEC protection relays, whatever theversion. With a PC or Notebook, you canset the relays via one of the interfaces andread out and visualize fault data.
Because of its modular design, DIGSI can beused economically depending on the re-spective requirements. The basic versionDIGSI 4 Basis already covers most standardtasks. The basic version can be extendedwith optional components. The basicversion includes:
• Setting parameters and routing
• Human-machine interface
• Commissioning, controlling and testing
• Communication via a direct connection,via PROFIBUS-FMS or other bus systems.
The complete version DIGSI 4 Professionalhas a greater scope than the basic versionwith the following additional functions:
• Display Editor – for creating and modify-ing default and single-line diagramsshown on the display
• SIGRA – for visualizing and evaluatingfault records
• DIGSI Remote – for remote controllingof SIPROTEC 4 relays via a modemconnection
• CFC – for creating new functionality orfor changing the predefined interlockconditions
• IEC 61850 System Configurator – forconfiguring and parameterizingIEC 61850 stations. This tool allows youto manage subnets, network communica-tors and their IP addresses and to connectthe information items of different com-municators.
By the way: If you are already workingwith the engineering tool SICAM plusTOOLS, you can integrate the functionalityof DIGSI 4 seamlessly into the SIMATICManager. You can also use DIGSI 4 in con-junction with SICAM on the station controllevel without any problems.
The CD-ROM contains all components inEnglish, German, Russian, French andSpanish. A “quick start” manual and the ca-ble for direct connection between PC andprotection unit is also delivered.
LSP
2337
-afp
.tif
DIGSI 4 Manager – the start platform
When working with DIGSI 4 Basis, you startout from the DIGSI 4 Manager: with thistool, you can conveniently structure andmanage projects; freely-configurable hierar-chies allow for representing any station to-pology. The protection relays are simplychosen from a catalog and dragged into theproject. Beside the possibility of archivingentire projects, the customer now also canexport individual units, e.g. to a floppy disk:time-consuming search within the file sys-tem is a thing of the past.
By double-clicking a relay, you will see allthe operating features: This gives you directaccess to the parameter setting, I/O configu-ration and – provided that you are online –the commissioning functions and processdata. It corresponds exactly to the menu treeimplemented in the units; this consistencyfacilitates mixed operation, in particularduring commissioning.
Routing and allocation
While in the previous versions the user hadto browse through a series of operational se-quences in order to link one single signal toa relay input or output, the allocation ma-trix is a real innovation in this respect: Allitems of information are listed in one win-dow sorted according to functions and canbe configured very easily and allocated with-out intermediate steps to the desired I/Os,LEDs, buffers and the system interface,which also appear in this window. Example:If you want a signal to be processed by thePLC or to be displayed dynamically in thedefault or single-line diagrams, all you haveto do is making a “check mark” in the cor-responding cell. A wide range of filters plusthe possibility to “expand” or “collapse”rows or columns in a flash ensure perfectoverview.
Parameterizing
In the clearly-structured tabbed dialogboxes, only the settings you really need andwhich are determined by the functionalscope are displayed.Particularly when making the protectionrelay-specific settings, it may be of advan-tage to display the tripping characteristics.With just one mouse click in the settingsdialog box you can visualize the characteris-tics or zone diagrams in a window, depend-ing on the set values. This allows you toobserve conveniently the effects of anychange in the settings.
Siemens SIP · 2006
3
3 Operating Program / DIGSI 4
3/4
Functions
Fig. 3/1 Easy management of relays in projects
LSP
2329
-afp
en.ti
f
Fig. 3/2 Routing of indications, measured values and commands in a concise matrix
LSP
2328
-afp
en.ti
f
Fig. 3/3 Well-structured parameterizing with context-sensitive help
LSP
2326
-afp
en.ti
f
Test & Diagnosis
The testing and diagnostic functions pro-vide decisive support during the phase ofcommissioning: you can check quickly andeasily the wiring or observe the effect that anindication transmitted via the system inter-face causes in the higher-level station.
The fault indications which are logged inthe relay in the case of a disturbance arelisted in DIGSI and can be saved andprinted out for documentation purposes.
SIGRA for fault analysis
The integrated Comtrade Viewer 4 allowsyou to visualize the corresponding meas-ured variables in curves as a function oftime. However, if you are looking for a con-venient tool which offers a more detailedfault analysis and is able to handle not onlycurves, but also circle diagrams, vector dia-grams and bar charts, then the SIGRA 4 op-tional package is the right choice. On thebasis of the measured values which are reg-istered in the fault record, SIGRA calculatesfurther values such as positive-sequenceimpedances, r.m.s. values, symmetricalcomponents, vectors, etc. Two measuringcursors enable you to measure the faultrecord quickly and conveniently. Otherfault records, e.g. from the remote end of aline, can be added to the existing fault re-cord. A synchronization function makes itpossible to synchronize the fault records to acommon time basis.
CFC programming
The SIPROTEC 4 devices incorporate a PLC(Programmable Logic Controller), in whichfactory-preset standard interlockings are ex-ecuted. If you wish to modify and adaptthem, you use the CFC Editor, which isavailable as a component in DIGSI 4 Profes-sional. Thanks to its fully graphical user in-terface, even users without programmingknowledge are able to make full and flexibleuse of the PLC’s wide range of possibilities.All items of information which have beenconfigured to ”CFC” in the allocation ma-trix before can be ”interconnected” withfunction blocks here. Once installed, theeditor familiar from the SIMATIC worldpresents itself with a SIPROTEC-specificblock library, which does not only providestandard operators such as ”AND”, but alsomore complex functions such as ”TIMER”.A sophisticated consistency check ensureserror-free configuration and reliableoperation of the protection relay functions.
Siemens SIP · 2006
3
3 Operating Program / DIGSI 4
3/5
Functions
Fig. 3/4 Exact visualization and evaluation of fault records with SIGRA
LSP
2325
-afp
en.ti
fFig. 3/5 Fully graphic programming, no programming skills required
LSP
2324
-afp
en.ti
f
Siemens SIP · 2006
3
3 Operating Program / DIGSI 4
3/6
Functions
Fig. 3/6Quick and easy change of devicedisplays like with a conventionalimage editor
LSP
2323
-afp
en.ti
f
Fig. 3/8 Convenient connection of information between the IEC 61850 communicators
Fig. 3/7 All IEC 61850 information at a glance: Subnets, communicators, IP addresses...
LSP
2485
.tif
LSP
2484
.tif
Siemens SIP · 2006
3 Operating Program / DIGSI 4
3
3/7
Selection and ordering data Description Order No.
DIGSI 4
Software for configuration and operation of Siemens protection unitsRunning under MS Windows 2000 / XP Professional EditionIncludes:Device templatesComtrade Viewer“Getting started” manual (paper)Serial DIGSI connecting cables (for all devices)Incl. service (upgrade, update, Hotline, newsletter)Operating languages:English, Germen, French, Spanish, Italian, Chinese and Russian (selectable)
BasisLicense for 10 computers, on CD-ROM (authorization by serial number) 7XS5400 - 0AA00Scope of delivery includes:Cable between PC/notebook (9-pin connector) and protection unit(9-pin connector) 7XV5100-4Adaptor 9-/25-pin for 7XV5100-4 cable for protection unit with 25-pin connector 7XV5100-8H
DemoMultimedia presentation with operation videos (tutorial part)On CD-ROM E50001-U321-A170-V1-7600
ProfessionalDIGSI 4 Basis – without IEC 61850 System Configurator+ SIGRA (fault record analysis)+ CFC Editor (logic editor)+ Display Editor+ DIGSI 4 RemoteLicense for 10 computers, on CD-ROM 7XS5402 - 0AA00Scope of delivery includes:Cable between PC/notebook (9-pin connector) and protection unit(9-pin connector) 7XV5100-4Adaptor 9-/25-pin for 7XV5100-4 cable for protection unit with 25-pin connector 7XV5100-8H
DIGSI 4 Professional + IEC 61850Professional and additional IEC 61850 System ConfiguratorLicense for 10 computers, but only for licenses of DIGSI 4 Basison CD-ROM 7XS5403-0AA00
Upgrade Basis� ProfessionalLike “DIGSI 4 Professional”, but only for DIGSI 4 licencees 7XS5407 - 0AA00
Upgrade Basis� Professional + IEC 61850License for 10 computers, but only for licensees of DIGSI 4 Basis,on CD-ROM 7XS5408-0AA00
DIGSI 4 ScientificLike “DIGSI 4 Professional”, but only for universitiesand research institutes, on CD-ROM 7XS5402-2AA00
DIGSI 4 you – Partner for LifeMultimedia presentation of all features, on CD-ROM E50417-A1174-C328
DIGSI 4 you – Start upTutorial step-by-step introduction, on CD-ROM E50417-A1174-C329
DIGSI 4 CopyDuplicate for 10 x licensesup to 9 copies per license may be ordered 7XS5490 - 0AA00
Siemens SIP · 2006
3 Operating Program / DIGSI 4
3
3/8
Selection and ordering data Description Order No.
SIGRA 4
Software for graphical visualization, analysis and evaluation of fault recordsRunning under MS Windows 2000 / XP Professional EditionIncludes:Fault record templatesElectronic manual (PDF)Detailed and step-by-step introduction, on separate CD-ROM
SIGRA 4 applicable with or without DIGSI for Comtrade records;also applicable for devices of other manufacturersLicense for 10 computers, on CD-ROM(authorization by serial number) 7XS5410 - 0AA00
TrialTrial version (for test purposes; limited to 30 days)On CD-ROM 7XS5411 - 1AA00
DIGSI 4 Remote
Software for remote control of Siemens protection unitsvia modem (and star coupler, if necessary)Running under MS Windows 2000 / XP Professional EditionIncludes:Electronic manual (PDF)
Optional package for DIGSI 4 BasisLicense for 10 computers, on CD-ROM(authorization by serial number) 7XS5440 - 0AA00
IEC 61850 System Configurator
Software for configuration of stations with IEC 61850 communication protocol.Running under MS Windows 2000 / XP Professional Edition.Optional package for DIGSI 4 Basis or DIGSI 4 Professional.License for 10 computers, on CD-ROM (authorization by serial number) 7XS5460-0AA00
Additional service free of charge
• All updates of DIGSI 4
• Customer Care Center
• DIGSI 4 Notes (quarterly newsletter)
• Access to the download area on the Internet at www.siprotec.com