Digital Wireless Intercom System Standard System · Standard System The Digital Wireless Intercom...
Transcript of Digital Wireless Intercom System Standard System · Standard System The Digital Wireless Intercom...
1 System example
2 System features 3 System standards
Audio group Production group
Production group
48
Standard System
The Digital Wireless Intercom System is an intercom system for broadcasting, theater, hall, and indus-try, which utilizes the basic technique of the personal handy phone (PHS), developed as a digital mobile communication technique of the “second generation” cordless telephone system. The coexistence of the simple operability that has most preferentially taken into consideration the basic functions as a wireless intercom and the reliability as professional equipment that has sought the ultimate in what is required therefor based on the achievements cultivated in developing the analog wireless intercom. Further, the radio communication device has fully incorporated the characteristics, such as clear sound quality inherent in digital communication, use of abundant and stable channels, excellent extendibility, etc.
1) Used frequency: 1900 MHz band, 35 waves 2) Communication system: Multi-carrier TDMA-TDD system 3) Antenna power: 10 mW or less 4) Multiplicity: 4 5) Frequency switching: Synthesizer system by quartz control 6) Separation: 300 kHz (600 kHz separation in the same area) 7) Channel switching: MCA (by CS selection) 8) Audio encoding system: 32 kbit/s ADPCM 9) Transmission rate: 384 kbit/s10) Technical standard conformance: Conformity-certificated product11) Radio station license: Not required
Radio station license is not requiredCommunication of higher quality than analog systemQuick connectionUse of optional CS control unit (for long distance) enables extended connection between master unit and slave unit up to 800 m (standard: 150 m) When the recommended cable [L-4E5C] is used
Digital Wireless Intercom System
Microphone volume odjustment volumeMonitor speaker volume odjustment volume
Monitor speaker
Power supply indicator
Power switch
Microphoneinput connector
HYB1unit
HYB2unit CS control unit
Independent telephone line(Modular jack)
PGM inputunit
AC100~240V power supplyinput connector
(CS D) (CS C) (CS B) (CS A)
Test originating/receiving jack
Line levelodjustment volume
Side toneodjustment volume
PGM volume odjustment volume
Display panel(LCD) Back light switch
SP jackSynchronization unit(IN/OUT)
感電に注意
SHOCK
WARNING 警告
ELECTRIC
AC100-240V 50/60HzAC100V 150VAAC240V 240VA
MADE IN JAPAN
DCL SYSTEMBS YFF-1870
A07-0294001 T
No.
FUSE
DU-7127
SP/TEL
SP
TEL
1
2
DU-7126
PGM IN
CS A CS B CS C CS D HYB 1 HYB 2
HYB
4WIN
ONOFFTERM
DU-7124
PUSH
4WOUT
2W
HYB
ON
2W
DU-7124
PUSH
4WOUT
TERM
4WIN
OFF
IN
PU
SH
OUT
DU-7125
CPU/SYNC.
DU−7123
OUT(DC OUT)
PU
SH
DU−7123
OUT(DC OUT)
PU
SH
DU−7123
OUT(DC OUT)
PU
SH
DU−7123
OUT(DC OUT)
PU
SH
CS CS CS CS
PUSH
100-120V 250V/1.5A220-240V 250V/1A
100–240V AC
OUT
YFF-1870BASE STATION TEST
H.SMIC
POWERMIC PGMSP IN OUT BAL.T.BINPGMT.B BAL.
430±2
424±2
480±2
50±
1
76.2
±1
88±
1
462±2
460±225
0±2
4.2
LIGHT
LINE1 LINE2
12
76
Base Station
SpecificationsStructure: Rack-mount typePower supply: AC 100 V~240 VInput/output: Microphone, SP, 2W/4W line, PGM, TELEnvironment: -10~+50˚C (excluding display panel (LCD) part)Weight: 7.0 kg
Power UNITProduction on order
This product is necessary when five or more CS units are connected to one BS unit.
49
*One unit of CS control is provided as standard equipmentCSB, CSC, CSD are optional.
SpecificationsOutput voltage: 24 VPower supply: AC 100 V 240 V can be selected (on shipping)Environment: -10~+50˚CWeight: 6.0 kg
Digital Wireless Intercom System
(BS) YFF-1870
• Easily connected to wired intercom (2W/4W2 system)• Connected to public telephone line• PGM input• Independent use enabled using microphone/speaker• Status display by LCD• Up to 4 CS units can be connected
(Up to 16 CS units can be connected by the optional setting)• Rack-mount type EIA=2U, JIS=2J
YPL-1800
CS control unit
Independent telephone line(Modular jack)
Originating/receiving call4W connector Originating/receiving
call 2W connector
Line switching switch
PGM input connectorAC100V-240V power supply
input connector
Synchronization connector(Modular jack)
Power supply indicator
Power switch
Line levelodjustment volume
Side toneodjustment volume
PGM volume odjustment volume
Base Station (BS) YFF-1880
50
• Easily connected to wired intercom (2W/4W system)• Connected to public telephone line• PGM input• Up to 4 CS units can be connected• Rack-mount type EIA=1U, JIS=1J
SpecificationsStucture: Rack-mount typePower supply: AC 100 V~240 VInput/Output: Microphone, SP, 2W/4W line, PGM, TELEnvironment: -10~+50˚CWeight: 4.4 kg
Channel display
Slot display
Antenne
LINE INconnector
LINE OUTconnector
DC INconnector
YRW–1870 CELL STATION
SLOT
CH
1 2 3 4
IN OUT(DC OUT)
CSNO.
DC 12~24VPUSH
4
2
3
153±2
40
155±
2
135±
2
225±
2
51±
2
44.5
±2
Metal fittings
Connector cap
Can
be
rota
ted
thro
ugh
180˚
10.520
25
1015
M5
3-φ3.5
15
40
M5
63
2-C3
2-C3
Cell Station
Fittings
(CS) YRW-1870
51
Digital Wireless Intercom System
• Diversity system• Compact and easily installed temporarily• Operable with one microphone cable (power supplied from BS)
Fittings for CS unit (YRW-1870)
SpecificationsStructure: Wall-mounting and microphone stand mounting systemPower supply: DC 24 V (supplied from the main device) DC 12 V (external power supply)Number of calls: Simultaneous calls are possible in 1: 4Antenna: Diversity operation with shared transmission/reception and integrally
structured caseChannel setting: Multi-channel access systemStandards: Technical standard conformance has been certificatedEnvironment: -10~+50˚CWeight: 705 g (fittings not included)
Can be rotated
through 180°
Channel displaySlot display
Antenna
Address settingSwitch
LINE OUTLINE IN
DC IN
Cell Station (CS) YRW-1850
SpecificationsStructure: Wall-mounting systemPower supply: DC 24V (supplied from the main unit) DC 12V (external power supply)Number of calls: Simultaneous calls are possible in 1: 4Antenna: Diversity operation with shared transmission/reception and integrally structured caseChannel setting: Multi-channel access systemStandards: Technical standard conformance has been certificatedEnvironment: -10~+50˚CWeight: 940 g (fittings not included)
52
TALK switch (Call switch)
BATT LED HEAD SET connector
SW & VR(Reception volume)
R
NO.
MADE IN JAPAN
T
A05–0038001
SDCL SYSTEM
DC3V 0.4W
PS YMT–1930
001IZAA1286
SW&VOL
PUSH CALL
OFF
PUSH TALK
L.K
BAT.
DIGITAL WIRELESS MOBILE
68±126
±1
50±
3
100.
5±2
Personal Station
Battery packYBA-4120 PBA-4120
ChargerPCF-1920
AA alkali cell×2 Nickel-hydrogen battery (2.4V)
*Batteries are not included.
SpecificationsCharger: 2 unitsCharge current: 700 mACharge time: About 3 to 4 hoursPower supply: AC 100 VEnvironment: 0~+40˚CWeight: 1.6 kg
53
Digital Wireless Intercom System
HS-316D
SpecificationsStructure: Compact, light, dustproof, and drip-proofPower supply: AA alkali cell×2Continuous use time: 8 hours or moreCall: Bidirectional callAntenna: Case-integrated (removal prohibited)Gain: 2.14 dBi or lessChannel setting: Multi-channel access systemStandards: Technical standard conformance has been certificatedEnvironment: -10~+50˚CWeight: 205 g (batteries included)
• Light and compact focused on operability • Operable with 2 AA cells • Monitor reception by the method of our own• Status display by LCD
(PS) YMT-1930
φ
±
±
φ
φ
φ
±
±±
±
HS-316D (Neck-mounting type)HEADSET
AMPLIFIER BOX
Keyboard for registration 4W/2W conversion connector
DN-5454 (For high-impedance headset)
COF-1800
2W4W
HS-126D (Head-mounting type)
54
Option
2W system (wired intercom etc.) converted into 4W system
DN-5435
SpecificationsMicrophone part (dynamic type)Impedance: 140Ω±5% at 1kHz
-77.8dB±4dB at 1kHz(0dB=1V/0.1Pa)
Frequency characteristics: 100Hz~12kHz within 20dB
Receiver partImpedance: 300Ω±20% (cord resistance included)Rated input: 10 mWMaximum permissive input: 500 mWOutput sound pressure level: 120dB±3dB at 1kHz
(0dB=2×10 Pa)Frequency characteristic: 100Hz~3.5kHz within -20dB
SpecificationsVoltage gain: 62dB or morePower supply: AA alkali cell×4Continuous use time: 5 hours or moreEnvironment: -10~+50˚CWeight: 400g (batteries included)
Outline of Digital Wireless Intercom SystemOne microphone cables connects between BS unit and CS unit, and between CS unit and CS unitMaximum 150 m between BS unit and CS unit, between CS units (recommended cable: CANARE L-4E5C)
1
Handover operation
When the extension of communication area is desired, handover setting is available by the setting of PS unit.
Handover: The CS units to which a PS unit is connected are switched automatically
Communication area A
Communication area B
When moved from communication area A to communication area B, CS unit of PS unit changes from No. 1 to No. 2.
CS No. 1
PS
CS No. 2Move
BS
2 Cascade connection up to 4 CS units is possible for one CS control unit in BS unit.Up to 4 CS control units can be mounted in one BS unit(When five or more CS units are connected to one BS unit, the Power UNIT (YPL-1800) is necessary)
5 No limit for use to the number of PS units dedicated for receiving command (When a PS unit dedicated for receiving command is used, the number of PS units that can be used is reduced by one)
4 PS units can be divided into 2 groups for use with one BS unit (YFF-1870)
3 Up to 4 PS units can make a call to one CS unit.
55
Digital Wireless Intercom System
CS
CS
CS
CS
CS
Group A
Group B
Group A
Group B
CS
Communication area 1
Communication area 2
Communication area 3
Communication area 4
BS
PS
PS
PS
PS
PS
System example -1 CS: 4 unitsBS: One unit PS: 16 units
CS: 16 units PS: 16 unitsBS: One unit Power UNIT: One unit
56
Power UNIT
BS
System example -2
Available frequencies (for private organization)Carrier number Frequency (MHz) Carrier number Frequency (MHz) Carrier number Frequency (MHz) Carrier number Frequency (MHz)
1 1895.150 11 1898.150 21 1901.150 31 1904.150
2 1895.450 12 1898.450 22 1901.450 32 1904.450
3 1895.750 13 1898.750 23 1901.750 33 1904.750
4 1896.050 14 1899.050 24 1902.050 34 1905.050
5 1896.350 15 1899.350 25 1902.350 35 1905.350
6 1896.650 16 1899.650 26 1902.650 36 1905.650
7 1896.950 17 1899.950 27 1902.950 37 1905.950
8 1897.250 18 1900.250 28 1903.250 12, 18CH are control carriers
9 1897.550 19 1900.550 29 1903.550
10 1897.850 20 1900.850 30 1903.850
Electrical characteristics BS (YFF-1870 YFF-1880)
CS (YRW-1870 YRW-1850)PS
YMT-1930
Commontohigh frequencies
Radio wave type G7D, G7E, G7X, G1D, G1E, G1X
Antenna type /2 sleeve antenna /4 whip antenna
Antenna impedance 50
Frequency range 1895.15 ~ 1905.95MHz
Total number of frequencies 37 waves (control carrier 2 waves, communication carrier 35 waves)
Separation 300kHz
Oscillation system Quartz control frequency synthesizer system
Frequency stability Within ±3×10-6
Modulation accuracy 12.5% or less
Transmission Antenna power 0.01W (+20 -50%)
Intensity of spurious radiation 2.5μW or less (beyond band) 250 mW or less (within band)
Modulation system /4 shift QPSK
Audio frequency 3kHz or less (300~3kHz)
Neighboring channel leak power 56dB or more than carrier wave power
Occupied frequency band area Within 288 kHz
Reception Reception system Double superhetrodyne
Reception sensitivity 16 dBμV or less (bit error rate 1×10-2)
Spurious block ratio 47 dB or more
Neighboring channel selectivity 50 dB or more (600 kHz detuning)
Body radiation 4 nW or less
Common Line frequency characteristic 300Hz~3kHz (within ±3dB)
Line input/output 0dBm balanced
Microphone input -60dBm balanced -20~0dBm unbalanced
Speaker output Inside 1W Outside 2W 10W or more at 8
External input 0dBm balanced
Used power supply/power consumption
AC100V±15%: 3AAC240V±15%DC 12V: 1A (master unit only)
130 mA or less at 3.0 V Operation terminated at 2.2V
Use environment Temperature; -10 ~ +50˚C, Humidity: Within 30~90%
YFF-1880 is not equipped with a microphone input or speaker output.
57
Digital Wireless Intercom System
2/4W
±
±
±±
±
±
±±
±
°
±
AF partTEL
Cell Station (CS)Line input/outputWired intercom
2/4W
Line input/outputWired intercom
4W
TEL
BATT
Synchronous cable
RF partCommunicationcontrol partAF partH. Set 1 3
2 4
Base Station (BS)
Cell Station
58
Digital Wireless Intercom System Portable type System
Features2W line of Clear-Com can be input directly4 PS units can be connected to one CS unit.Up to 5 CS units can be used simultaneously with synchronous connectionContinuous use time is 7 hours or more (when 8 AA alkali cells are used)The following settings are available with a cross key on the front
• Setting of LINE input/output interface (4W/2W)• Setting of talkback• Setting of audio input/output level• Confirmation of registration ID• Setting of RF output level
SpecificationsAudio frequency: 3.4 kHz or lessAudio encoding system: 32 kbit/s ADPCMLine specification: 4W: IN 0 dBm, OUT 0 dBm
AIR: IN -20dBmMicrophone input: -60dBm (unbalanced 600 ) Speaker output: 15 mW or more (at 8 )Power supply: DC8.0~16.0V (negatively grounded)Structure: Portable typeStandards: Technical standard conformance has been certificatedEnvironment: -10~+50Weight: 430 g
(CS) YFP-1821
Wired Intercom System, Connection with 2 channels is possible!Basic system
Personal Station (PS)
(BS) YOP-1800
YBB-1800
Base Station
Battery box
FeaturesAudio frequency: 3.4 kHz or lessLine specification: 4W: Input -20dBm(unbalanced 600 ) Output 0dBs(balanced 50 )Program input: -20dBm(balanced 600 )Public telephone function input/output: -10dB(600 ) 1 linePower supply: DC 8.0~13.5V(negatively grounded)Structure: Portable typeEnvironment: -10~+50˚CWeight: 480 g
YOP-1800 Battery box8 AA alkali cells are used
59
Digital Wireless Intercom System