DIGITAL WEIGHINGINDICATOR - PR 1613RELIABLE WEIGHING INDICATORSFOR PROCESS CONTROL

Electrical safetyTechnical dataaccording to IEC 348

Load cell typesMains supplyAll strain gauge load cells or any other types of 110 V AC, 220 V AC or 240V AC - 15% / + 10%, mV-source with linear output.internally settable via solder links, 50/60 Hz

Load cell supplyAnalog filterSupply voltage 12 VCD or 20 VCD selectable Active Butterworth low pass filter, (short circuit proof) cut-off frequency fc = 2 HzExternal load cell supply possible

Measuring principleMaximum loadA/D conversion : integrating, ratiometrically to 6 load cells 600 Ohm. each, connected in the load cell voltage supplyparallel (100 Ohm) or 4 load cells 350 Ohm, Conversion time : 50 ms each connected in parallel (87.5 Ohm)Measuring time : 0.1 s to approx. 2s, adjustable at intervals of 0.1 s.Measuring rangeInternal resolution : 0.2µv/count Total range : 36 mV

Minimum span : 2.4 mVStatus indicatorDead load range : ->0<- zero indication, 0 mV ... 33.6 mV Within ± 1/4 d standstill Measuring voltage input impedance: "B" gross weight displayed, >10 Mohm "Net" net weight displayed, span and dead load adjustment : via software "T" tare weight displayed during calibrationdimension sign settable for kg or t (weight symbol).Temperature effectsDecimal pointZero 0.1µ V/K RTIxxxxx, xxxx.x, xxx.xx, xx.xxx selectable.Span < 0.006 % 10 K (6 ppm/K)

Linearity <0.007 %

Weigh displayType : vacuum fluorescent Elements : 7 digits (7 segments) plus dimension sign and status indicators. Active digits 5, plus negative sign Heigh: digits and dimensions signs 12.5 mmColour : bright green

MTBF35,000 hoursData protection by lithium battery : typical 16,000 hours (if power off). Mains supply fade-100 % for 10 ms-50 % for 20 ms-20 % for 50 ms

The weight indicator PR 1613 has been designed for high precision weighing applications e.g., for Platforms, Weigh Bridges, Crane, Tank, Hopper Weighing and Batching. Utmost interference suppression, the robust metal housing with splash proof front panel makes it ideal for use in the hardest environments.

High accuracy weight indicator for weights & measures approved applications

S i m p l e s o f t w a r e c a l i b r a t i o n a n d intialisation

Free programmable

High resolution of 40000 counts

Easy to read vacuum fluorescent display

Auto zero tracking and calibration check

Features

PR 1613/00 Weight Indicator

F r e e l y p r o g r a m m a b l e v a r i o u s communication protocols

Minimum maintenance and recalibration cost

Easy calibration and configuration, software calibration

Dual range calibration for better accuracy

Max/Min alarm

Built - in - clock (RTC option available)

Error code messages for easy trouble shooting & maintenance.

Various hardware output options

Dual range calibration for accurate weighing

Built-in logic I/O

Robust compact metal housing with splash proof front panel

Unique features Technical data

Performance data

Accuracy

Meets weights and Measures standards

European approval 5000 d OIML class 111

Power consumption

Max. 25 VA / 19 W

Temperature range0 oOperation : -10 C to 55 C0 oStorage : -40 C to 70 C

PR 1613/00 Functional Diagram

Hardware options

Current loop TTY PR 1601/00

RS-232 (V 24) PR 1602/00

RS-232 + TTY PR 1603/00

RS- 422/485 PR1604/00

Parallel printer interface : PR 1605/00

Analog current output : PR 1606/00

Cable Junction Box

HW-Options

1A 1B 2

PR 1613

Up to 6 Load Cells

6 Opto-Inputs

PR 1613/80 RAMExtension

12 Opto-Outputs

PR 1609/00 RealTime Clock

SW-Options

In/Output option (1 selectable)

PR 1603/00 double serial interface RS 232/CL TTYPR 1605/00 parallel printer interfacePR 1606/00 analog output 0-10V & 0/4-20mA or (with SW) 2-10VPR 1607/00 4” analog input 0-10V or 0-20mAPR 1608/00 5 decades BCD-output (open emitter)PR 1608/10 5 decades BCD-output (open collector)PR 1610/00 pulse counter input (plus 7 others)PR 1621/00 profibus interface (fast 12 MBITS/s PROFIBUS-DP)

PR 1601/00 current loop TTYPR 1602/00 RS 232 (V24)PR 1604/00 RS 422/RS 485

Serial interface options (2 free selectable)

PR 1613/30 on-board weighing extensionwith tilting correction

PR 1613/05 communication option for

DUST 3964RTELEPERMMODBUS/JBUS

PR 1613/10 programming facilityfor internal PASS & PLC functions.

Free programmable weighing sequence (PASS)Free programmable I/O functions (PLC)Standard program for weighbridges

PR 1613/20 programming facilityfor internal PASS & PLC functions.

Free programmable weighing sequence (PASS)Free programmable I/O functions (PLC)Standard program for batching

TEST B T T T

PR 1613/03 Compact Weight Bridge Terminal

Freely programmable

Integrated terminal with keyboard

Various communication protocols

Easy calibration and configuration

Self test and error messages for easy trouble shooting

Vacuum fluorescent display

Dual range calibration leading to better resolution and accuracy

Auto zero tracking

Sealed membrane keyboard for complete protection from dust

More than 2000 truck information storage facility with memory extension module

Unique featuresTechnical data

Performance data

Accuracy : Meets weights and Measures

standards

Digital part

Measuring time: 0.15 to approx. 25 (adjustable

in intervals of 0.15)

Step widths : Adjustable for 1,2,5,10,20 or 50

Kg/t

Maximum scale value 99990 (depending upon

resolution)

Memory capacity : standard 32 KB (available

19KB) expandable to 512 KB with PR 1613/80

Hardware options

Current loop TTY PR 1601/00

RS-232 (V 24) PR 1602/00

RS-232 + TTY PR 1603/00

RS- 422/485 PR1604/00

Parallel printer interface : PR 1605/00

Analog current output : PR 1606/00

Memory extension module : PR 1613/80

Can be directly connected to a printer and reports can be generated

Model approved by W & M authorities

Robust compact metal housing with splash-proof, dust-proof front panel

Self diagnostic error codes for trouble shooting

Substitute for PC based weighbridge systems

Operating display

Can only be activated in connection with SW-

option PR 1613/10 and can be controlled via

PASS program.

Type Cursor controlled two line

vacuum - flourescent display,

Active digits 20 per line,

Height 5 mm,

Structure 5x7 matrix,

Colour bright green

Power consumption max. 30 VA / 22.5 W

Temperature range 0 0Operation (W & M) applications: -10 C to +40 C 0 0For industrial applications : -10 C to + 55 C

0 0Storage : -40 C to +70 C

Software options

Weighbridge software PR 1613/10

Communication option PR 1613/05

Front Facia Of 1613/03

Rear Plate PR 1613/03

PR 1613/WP Weight Transmitter & Indicator

Unique Features

F r e e l y p r o g r a m m a b l e , v a r i o u s communication protocols

Minimum maintenance and recalibration cost

Easy calibration and configuration, software calibration

Max/Min alarm levels settable to any range of FSD

Built in clock (Real time controller option)

Wide choice of outputs

Error code messages for easy trouble shooting & maintenance

Galvanically isolated 4-20 mA output optional

Technical data

Weather proof and dust proof

Various hardware output options

Built-in logic I/O

Robust compact wall mountable housing-IP 65 protection

Logic outputs :

12 potential-free opto-isolated outputs

(passive)

Maximum voltage : 30 VDC,

Maximum current : 25 mA

Analogue output (4-20mA) Accuracy

With PR 1606 : ±0.1 % FSD

With optional isolated output module :±0.2 %

FSD

Power consumption

Max. 25 VA / 19W

Temperature range0 0Operational : -10 C to + 55 C, 0 0Storage : -40 C to + 70 C

Performance data

Accuracy : Meets weights and Measures

standards

European approval 5000 d OIML class III

Max/Min alarm

2 relay outputs settable throughout the

FSD

Relay contact rating : 230V / 5 amps

Hardware options

Current loop TTY PR 1601/00, RS. 232 (V 24) PR

1602/00, RS. 422/485 PR 1604/00, Parallel

printer interface PR 1605/00, Analog current

output PR 1606/00, Memory extension module

PR 1613/80

Process interfaces

Logic inputs:

6 potential-free opto-isolated inputs,

Input voltage :

“0” level 0....5 VDC, “1” level 10....31 VDC

Input current : <11 mA at 24 VDC All dimensions are in mm.

4585

M

ax11

2

Top View

Housing Colour : Mushroom

Wall Mtg. Bracket

PR 1604 RS-485 module in line 1/aPR 1606 4-20mA module in parallel portAccuracy of overall system shall be %%p0.5%

ConstructionDetails of housing :- CRCA, spray paintedDegree of protection :- IP 65Weight :- 10 kg. Approx.

Trafo 24V

Relay PCB

Digital PCB

Line TransformerMains

1/A2/B

321

281

TB N T

PR 1613

Front View

1613 Kg

Text Foil

180

50

Rear View

Wall Mtg. Dimensions

∅ 7.0

Bra

cket

s To

Hol

d To

p C

over

Wh

ile S

ervi

cin

g

4 - 20mAParallel Port

MainsSocket

Interior View(as seen from front)

Cable Glands

Engineering the Weighing Process

Corporate Office : Sartorius Mechatronics India Pvt. Ltd., #10, 6th Main, 3rd Phase, Peenya, KIADB Indl. Area, Bangalore - 560 058. Tel.: 91-80-2837 5381 / 2839 0102 Fax: 91-80-2837 8716 / 2839 8262 E-mail : mechatronics@sartorius-india.com Website : www.sartorius-india.com

PR 1613/FP Flame Proof Weight Transmitter & Indicator

Technical data

Performance data

Accuracy :Meets weights and Measures

standards

European approval 5000 d OIML R76

Power consumption

Max. 25 VA / 19 W

Temperature range 0 0Operation : - 10 C to + 55 C,

0 0Storage : - 40 C to + 70 C

139

350

350

Glass Window 150x150

E

E

1/2 Inch Gland(5X)1/2 Inch Gland 3/4 Inch Gland

326

PR 1613/FP is used in hazardous areas of zone I and ll

Robust compact wall mountable flame proof housing for GR II A&B - IP 65 protection

As per IS : 8241

Max/Min alarm levels settable to any range of FSD

Error code messages for easy trouble shooting & maintenance

Galvanically isolated 4-20 mA output optional

Hardware options

Current loop TTY PR 1601/00, RS. 232 (V 24) PR

1602/00, RS. 422/485 PR 1604/00, Galvanic

isolation module.

Process interfaces

Logic inputs :

6 potential-free opto-isolated inputs,

Input voltage :

“O” level 0....5 VDC

“1” level10....31 VDC,

Input current : <11mA at 24 VDC ,

Logic outputs:

12 potential-free opto-isolated outputs

(passive)

Maximum voltage 32 VDC

Maximum current 25 mA

Max/Min alarm

2 relay outputs settable throughout the FSD,

Relay contact rating : 230V / 5 amps