DIGITAL GLUE SYSTEM CONTROL - COPAR
2
Glue System Control provides greater flexibility and glue volume control, reduces the amount of glue required, and reduces tack time. The set-up is operator friendly and requires very little work. COPAR uses a three-way valve that has both glue and water feeding the extruder. The valve can be easily switched for quick and easy clean-up. This method reduces end-of-shift or end-of-day clean-up time to seconds. DIGITAL GLUE SYSTEM CONTROL The glue control system, con- sisting of air and glue filter and air and glue pressure controls is contained in a single win- dowed cabinet. This unit also causes the glue pressure to fol- low changes in speed of the material to be glued. The design of the pressure regulat- ing system prevents over-gluing of a carton after a stop. GLUE PRESSURE CONTROL GLUE PUMP Provides long, reliable service to one or multiple glue systems. Neoprene diaphragms are stan- dard. Teflon diaphragms are offered as an option. The glue pump uses filtered air from the glue pressure control cabinet. No electrical power is required to operate the pump. GLUE APPLICATOR ASSEMBLY Two applicator sub-assem- blies are provided so that top down or bottom up changeover is accom- plished in a matter of less than a minute. Standard applicator heads produce a one inch wide pattern by means of five holes on 1/4" centers. Nine holes on 1/8" centers available on request. Fixed pattern widths to 4": adjustable to 6". Minimizes the problem of boxes sticking together on the inside or extruded glue outside, preventing problems with customers automatic packing machinery. Glue flow stops automati- cally when the machine stops, even when a carton stops under the glue extruder. The DGSC requires less cleanup time. It reduces end- of-shift or end-of-day cleanup time to seconds. There are no parts to remove or soak overnight. The pattern position is main- tained constant regardless of speed changes between 0 and 1800 fpm (550 mpm). The DGSC eliminates com- mon problems such as sling- ing of glue and having trim waste scrape glue off the wheel surface. The amount of glue being applied can be adjusted by the dial on the front operator panel. Once a proper application rate has been selected, the control will automatically adjust the glue pressure to maintain the proper application as the machine speed changes. DGSC Cabinet Dimensions (HxWxD) Control Cabinet: 14" x 16" x 6.5 35.5cm x 40.6cm x 16.5cm Pressure Control: 16.25" x 14.5" x 7.75" 42cm x 37cm x 20cm Power Required: 120V 50/60Hz or 220V 50/60Hz A U.S. Manufacturer and Service Provider for over 50 years 5744 West 77th Street Burbank, Illinois 60459 U.S.A. Telephone (708) 496-1859 Fax (708) 496-0079 Email: [email protected] www.Copar.com COPAR Corporation
Transcript of DIGITAL GLUE SYSTEM CONTROL - COPAR
Glue System Control provides greater flexibility and glue volume control,
reduces the amount of glue required, and reduces tack time.
The set-up is operator friendly and requires very little work. COPAR uses a three-way valve thathas both glue and water feeding the extruder. The valve can be easily switched for quick andeasy clean-up. This method reduces end-of-shift or end-of-day clean-up time to seconds.
DIGITAL GLUE SYSTEM CONTROL
The glue control system, con-sisting of air and glue filter andair and glue pressure controlsis contained in a single win-dowed cabinet. This unit alsocauses the glue pressure to fol-low changes in speed of thematerial to be glued. Thedesign of the pressure regulat-ing system prevents over-gluingof a carton after a stop.
GLUE PRESSURE CONTROL
GLUE PUMPProvides long, reliable service toone or multiple glue systems.Neoprene diaphragms are stan-dard. Teflon diaphragms areoffered as an option. The gluepump uses filtered air from theglue pressure control cabinet. Noelectrical power is required tooperate the pump.
GLUE APPLICATOR ASSEMBLYTwo applicator sub-assem-blies are provided so thattop down or bottom upchangeover is accom-plished in a matter of lessthan a minute. Standardapplicator heads produce aone inch wide pattern bymeans of five holes on 1/4"
centers. Nine holes on 1/8" centers available on request.Fixed pattern widths to 4": adjustable to 6".
Minimizes the problem ofboxes sticking together on theinside or extruded glue outside,preventing problems withcustomers automatic packingmachinery.
Glue flow stops automati-cally when the machine stops,even when a carton stopsunder the glue extruder.
The DGSC requires lesscleanup time. It reduces end-of-shift or end-of-day cleanuptime to seconds. There areno parts to remove or soakovernight.
The pattern position is main-
tained constant regardless ofspeed changes between0 and 1800 fpm (550 mpm).
The DGSC eliminates com-mon problems such as sling-ing of glue and having trimwaste scrape glue off thewheel surface.
The amount of glue beingapplied can be adjusted by thedial on the front operator panel.Once a proper application ratehas been selected, the controlwill automatically adjust theglue pressure to maintain theproper application as themachine speed changes.
DGSC Cabinet Dimensions
(HxWxD)
Control Cabinet:14" x 16" x 6.535.5cm x 40.6cm x 16.5cm
Pressure Control:16.25" x 14.5" x 7.75"42cm x 37cm x 20cm
Power Required:120V 50/60Hz or220V 50/60Hz
A U.S. Manufacturer and Service Provider for over 50 years
5744 West 77th Street Burbank, Illinois 60459 U.S.A. Telephone (708) 496-1859 Fax (708) 496-0079
Email: [email protected] www.Copar.com
COPAR Corpora t ion
DIGITAL GLUE EXTRUSTION SYSTEM
IMPROVED DESIGN INCLUDES:
COPAR’S Stitch Gluing
Next Order Entry
Optional Non-Contact Extrusion Heads
Digital Pattern Entry
Solid State Circuitry Design
Fewer Components
Flexible Programming
Overload Protection On All Valve Outputs
Data Retention During Power Outages
Capable Of Precise Adjustments During Operation
Inputs And Outputs Separated
Configuration Parameters Entered Digitally
Total Of 2 Circuit BoardsOne Main Processor Board And One Display Board
LED Status IndicatorsFor Programming And Troubleshooting
Dual Channel Digital Glue System Control(2) Glue Heads
Purge Box Assemblies
Sensor Assembly Mini Beam 1.7 Focus
Encoder Cable 30’ Long
Manual
5744 West 77th Street, Burbank, Illinois, 60459 Telephone: (708) 496-1859 Fax: (708) 496-0079
Email: [email protected] www.Copar.com
Individual componentscan replace existing
competitor’s components
CoparQuality Industrial Products
For Over 50 Years
COPAR Corpora t ion
