Digital Electronics - Khulna University

Digital Electronics ECE 2203

Professor Dr. Md. Shamim Ahsan Electronics and Communication Engineering Discipline

Khulna University.

Lecture 3

Logic Gates & Boolean Algebra

Boolean Theorems

Basic Postulates

Duality

Fundamental Theorems of Boolean Algebra

Universality of NAND and NOR Gates

Alternate Logic Gate Representation

Logic Symbol Interpretation

Outline


Boolean Theorems:

• We have seen how Boolean algebra can be used to help analyze a logic circuit

and express its operation mathematically.

• We will continue our study of Boolean algebra by investigating the various

Boolean theorems (rules) that can help us to simplify logic expressions and

logic circuits.

Basic Postulates:


Basic Postulates:


Duality:

• The principle of duality is a very important concept in Boolean algebra.

Briefly stated, the principle of duality pronounces that, if an expression is valid

in Boolean algebra, the dual of the expression is also valid.

• The expression is found by replacing all „+‟ operators with „.‟, all „.‟ operators

with „+‟, all ones with zeros, and all zeros with ones.

• The principle of duality will be used extensively in proving Boolean algebra

theorems. In fact, once we have employed the postulates and previously

proven theorems to demonstrate the validity of one expression, duality can be

used to prove the validity of the dual expressions.

Example (1): Find the dual expression ~ a + (bc) = (a + b)(a + c)

Solution:

a(b + c) = ab + ac

When obtaining a dual, we must be careful not to alter the location of

parentheses, if they are present.


Fundamental Theorems of Boolean Algebra:

Table 1. Summary of the fundamental postulates & theorems of Boolean algebra.

Expression Dual


Proof of 1(a): Proof of 1(b)

a.a = aa + 0 [P-2(a)]

= aa + aa [P-6(b)]

= a(a + a) [P-5(b)]

= a.1 [P-6(a)]

= a [P-2(b)]


a.0 = 0 by duality


Example (2):

(i)

(ii)

(iii)


a(a + b) = (a + 0)(a + b) [P-2(a)]

= a + 0.b [P-5(a)]

= a + 0 [P-2(b)]

= a [P-2(a)]


Example (3):

(i)

(ii)

(iii)

(iv)


a(a + b) = aa + ab [P-5(b)]

= 0 + ab [P-6(b)]

= ab [P-2(a)]


Example (4):

Example of Theorem 6(a):-

(i)

Example of Theorem 6(b):-

(i)

(ii)


(a + b)(a + b) = a + bb [P-5(a)]

= a + 0 [P-6(b)]

= a [P-2(a)]


Example (5):


(i)

(ii)


(i)

(ii)


(a + b)(a + b + c) = a + b(b + c) [P-5(a)]

= a + bb + bc [P-5(b)]

= a + 0 + bc [P-2(a)]

= a + bc [P-2(a)]

= (a + b)(a + c) [P-5(a)]


Proof of 8(a):


Proof of 8(a) (Continued):


Example (6):

Example of Theorem 8:-

a(b + z(x + a)) = a + (b + z(x + a) [ xy = x + y] [T-8(b)]

= a + b . z(x + a) [ x + y = x.y] [T-8(a)]

= a + b (z + (x + a)) [ xy = x + y] [T-8(b)]

= a + b (z + x.a) [ x + y = x.y] [T-8(a)]

= a + b (z + xa) [ = x] [T-3]

x

= a +bz + b a [P-5(b)]

= a + bx + bz [ x + xy = x + y] [T-5(a)]

= a + b (x + z) [ x(y + z) =

x

xy + xz] [P-5(b)]

Example (7):


(i)

(ii)


(i)


Proof of 9(a):

Example (8): Reduce .

Solution:


AB +ABC +A(B + AB)

AB +ABC +A(B + AB) = A(B + BC) + A(B + AB) [ x(y + z) = xy + xz]

A(B + C) + A(B + A) [ x + xy = x + y]

= A

B + AC + AB + AA [ x(y + z) = xy + xz]

= AB + AC + AB + A [ x.x = x]

= AB + AC + A [ x + xy = x + y]

= AB AC + A [ x + y = x y]

= (A B) (A + C) + A [ x y = x y

]

= (A B) (A + C) + A [ x = x]

= A + BC + A [ (x + y)(x + z) = x + yz]

= 1 + BC [ x + x = 1]

= 1 = 0 [ 1 + x = 1]


Universality of NAND and NOR Gates:

• It is possible, however, to implement any logic expression using only NAND

gates and no other type of gate. This is because NAND gates, in the proper

combination, can be used to perform each of the Boolean operations OR,

AND, and INVERT (NOT). This is demonstrated in Figure 1.

Figure 1. NAND gates can be used to implement any Boolean function.


Universality of NAND and NOR Gates:

• In a similar manner, it can be shown that NOR gates can be arranged to

implement any of the Boolean operations. This is illustrated in Figure 2.

That’s why NAND and NOR gates are called Universal Gates.

Figure 2. NOR gates can be used to implement any Boolean function.

Problem (Tocci-C 3-28):

.

Figure 3-53(b)

Solution:

• The output expression of Figure 3-53(b) is ~

• The equivalent circuit of Figure 3-53(b) using only NAND gates is shown in

Figure 3.



Solution (Continued):

Figure 3. Equivalent circuit of Figure 3-53(b).

• The NAND gates 7, 8, 9 and 10, 11, 12 can be eliminated from Figure 3 since

they perform a double inversion of the signal outputs of NAND gates 4, 5, and

6. The simplified circuit of Figure 3 is illustrated in Figure 4.

• The output expression of Figure 4 is ~ .



Solution (Continued):

Figure 4. Simplified circuit of Figure 3.

• Using DeMorgan‟s Theorem we obtain ~

• So the simplified output expression is equal to the expression for the original

circuit.


x = ABC ABC + ABD

x = ABC + ABC + ABD


Alternate Logic-gate Representation:

• Although you may find that some circuit diagrams still use these standard

symbols exclusively, it has become increasingly more common to find circuit

diagrams that utilize alternate logic symbols in addition to the standard

symbols shown in Figure 5.

Figure 5. Standard and alternate symbols for various logic gates. .


Logic Symbol Interpretation:

• When an input or output line on a logic circuit symbol has no bubble on ot,

that line is said to be active-HIGH. When an input or output line does have a

bubble on it, that line is said to be active-LOW.

• To illustrate, Figure 6(a) shows the standard symbol for a NAND gate. It has

an active-LOW output and active-HIGH inputs. The logic operation

represented by this symbol can therefore be interpreted as follows:

“The output goes LOW only when all of the inputs are HIGH.”

Figure 6. Interpretation of the two NAND gate symbols. .


Logic Symbol Interpretation:

• The alternate symbol for a NAND gate shown in Figure 6(b) has an active-

HIGH output and active-LOW inputs, and so its operation can be stated as

follows:

“The out goes HIGH when any input is LOW.”

• For now, let us summarize the important points concerning the logic-gate

representations.

(1) To obtain the alternate symbol for a logic gate, take the standard symbol

and change its operation symbol (OR to AND, or AND to OR), and

change the bubbles on both inputs and output (i.e. delete bubbles that are

present, and add bubbles where there are none).

(2) To interpret the logic-gate operation, first note which logic state, 0 or 1, is

the active state for the inputs and which is the active state for the output.

Then realize that the output’s active state is produced by having all of the

inputs in their active state (if an AND symbol is used) or by having any

of the inputs in its active state (if an OR symbol is used).

Self Study: Tocci-3-14

Problem (Tocci-B 3-40):

Figure 3-59

Solution:

• The active state of the output of Figure 3-59 is active-HIGH or 1. Inputs to the

Gate-3 is active LOW. So any one of the inputs to the OR gate is 0, the output

goes to 1. So, D should be 0.

• So, E should be 1. When B and C are 0, the output of the Gate-2 will be 0.

• Again when B = 1 and A = 0, then the output of the Gate-1 will be 0.

• So, X will go HIGH when E = 1, or D = 0, or B = C = 0, or when B = 1 and A

= 0.



Homework:

• Problems-Tocci-Chapter 3:- 3.1, 3.6, 3.12 to 3.21, 3.24 to 3.31,

3.38.

References

[1] “Digital Systems: Principles and Applications,” Neal S. Widmer,

Gregory L. Moss, and Ronald J. Tocci, 12th Ed., Pearson (2018).

[2] “Digital Logic and Computer Design,” M. Morris Mano, 1st Ed.,

Pearson (2016).

[3] “Digital Logic Circuit Analysis and Design,” Victor P. Nelson, H.

Troy Nagle, Bill D. Carroll, and David Irwin, 1st Ed., Pearson

(1995).

Digital Electronics - Khulna University

Documents

Transcript of Digital Electronics - Khulna University