Digital and Proportional Miniature Solenoid Valves - Rometec · X-Valve® is a two-position,...

1Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences

Pneutronics Division

Digital and ProportionalMiniature SolenoidValves

Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences

Catalog PLS01-1001/USVALVES

Min

iature V

alves

X-VALVE

Valve Type:

3-Way, 2 PositionNO, NC & Distributor(50 psi, NC or NO only)(100 psi, NC only)

Media:Non-Reactive Gases and Select Liquids

Operating Environment: 0 to 50°C15 to 50°C for 100 psi

Storage Temperature: -40 to 70°C

Length: 24 mm (.92 in)

Width: 7.9 mm (.31 in)

Height: 9 mm (.35 in)

Spacing: 8 mm (centerline)

Porting: Universal barbs for 1/16" I.D. tubing(1/32" Wall Max.); Manifold mount with X-seal

Weight: 0.16 oz (4.5 grams)

Internal Volume: 0.074 cm3 (.0045 in3)

Leak Rate: <0.016 sccm (6 psi Silicone) <0.16 sccm (6 psi EPDM & FKM)<0.2 sccm (50 & 100 psi only)Response: <20 msec cyclingPressure:0 to 6 psig 0 to 30 psig0 to 50 psig0 to 100 psig

Minimum Flow: 4 lpm @ 6 psi 6 lpm @ 30 psi5 lpm @ 50 psi9 lpm @ 100 psi

Orifice Sizes/Equivalent Cv: 0.020"/0.005 Cv (100 psid)0.030"/0.007 Cv (50 psid)0.030"/0.010 Cv (30 psid)0.045"/ 0.018 Cv (6 psid)

PBT (Polybutylene Terephthalate);430 Series Stainless Steel; 302Series Stainless Steel (passivated);FKM (Fluoroelastomer); EPDM(Ethylene Propylene DieneMonomer); and Silicone

Consult factory for details.

Physical Properties

Power: 0.5 Watt (low pressure model) 1.0 Watt (high pressure model)

Voltage:3, 5, 12, 24 VDC

Not all voltage options are availablein all models. See Ordering Info.Electrical Connections: PC Pins, 4 mm centers (all models)

Electrical

Wetted Materials

Performance Characteristics

X-Valve®

X-Valve® is a two-position, three-way universal digital valve, just 8mm in width.The X-Valve’s unitized body incorporates its functional features in a singleglass-reinforced, PBT (Polybutylene Terephthalate) molded body.

✦ Provides compact size; only 8mm in width.

✦ Meets a range of pressure requirements including 6, 30, 50 & 100 psi.

✦ Offers optional capabilities to meet a 0.016 sccm leakage specification (0.2 sccm for 50 & 100 psi) for over 25 million cycles.

✦ Ensures high reliability with its single piece body design.

✦ Allows for direct tubing connection or a radial seal for manifold assembliesthrough its universal barb design.

8mm Digital Solenoid Valve

Features

X-Valve is a registered trademark of Parker Hannifin Corporation.

haunted milk

Text Box

2

For more information, call us toll-free at 1-800-525-2857

Min

iatu

re V

alve

s


Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5

X-VALVE

CAD Drawing

Flow

Sample Part ID X 1 05 1 F _ 0

Description Series Model Voltage Electrical Connection

Elastomer _ Optional Accessories

No: Pressure/Orifice/Coil Wattage/Type 03: 3 VDC S: Standard Pins F: FKM S: Screws (2)

1: 6 psi/0.045"/0.5 Watt/Universal L: Long Pin G: Gasket

Options 2: 30 psi/0.030"/1 Watt/Universal B: Screw & Gasket

3: 50 psi/0.030"/1 Watt/NC 12: 12 VDC 0: No Accessories

Accessory field not printed

on valve

05: 5 VDCc

(6psi only)

24: 24 VDC 4: 50 psi/0.030"/1 Watt/NO

5: 100 psi/0.020"/1 Watt/NC

E: EPDM

S: Silicone

(6psi only)

(6psi only)

Ordering Information

NOTE: Please consult Parker Life Sciences for other considerations. For more detailed

information, visit us on the Web.

.479 [12.17]

haunted milk

Text Box

3


Catalog PLS01-1001/US

VALVES

Min

iature V

alves

X-SYSTEM

Media:Air & Inert Gases

Leakage:0.016 sccm external

Operating Temperature:0 to 50° C

Valve Mounting Centerline:8 mm (0.31 in)

Electrical Connection Centerline:4 mm (0.16 in)

Storage Temperature:-40 to 70° C

Pressure:0 to 30 psig

Size (stock profile):25.4 mm x 13.5 mm (1.0 in x 0.53 in)

Service Life (cycles of valve assemblyand disassembly):3 minimum

Flow SLPM:Unrestricted X-Valve flow

Physical Properties

See X-Valve® (page 2) for valve description.Parker can assemble a manifold to meetyour pneumatic specifications. Standardmanifold is offered through ten positions;consult factory for application requiringmore than ten positions.

Special Notes

X-System™

X-System™ offers molded modular pneumatic manifold technology designed to support the 8 mm X-Valve® products. The X-System is a durable thermo-elastomer assembly incorporating several innovative design features and provides significant advantages over traditional aluminum materials. It is available in both inline and diverter assembly configurations.

✦ No screws or seals required for valve mounting.

✦ Lightweight and low cost.

✦ Ideal for "rapid prototyping" (eliminates the need for machining a manifold).

✦ Mixed 2-Way and 3-Way assemblies possible (consult factory).

✦ "Mixed" pneumatic logic in diverter assembly; multiple operating pressuresinclude vacuum, hybrid, and partitioned manifold options.

✦ Shorter OEM design cycles and faster delivery times.

Inline Assembly

Dimensions

Features

Inline Assembly/Diverter Assembly

X-Valve is a registered trademark and X-System

is a trademark of Parker Hannifin Corporation.


Min

iatu

re V

alve

s


VALVES


X-SYSTEM

Diverter Assembly

Sample Part ID 912 _ 000 6 02 1 01

Description Series _ End Caps Number of Valves on Left of Diverter

Configuration X-Valve Selection

6: No 01-10 1: 2-Way NC (common supply to NC Port1, Port 3 plugged) 01-18

7: Yes 2: 2-Way NC (common supply to common Port 2, Port 3 plugged)

Options 3: 2-Way NO (common supply to common Port 2, Port 3 plugged)

4: 2-Way NO (common supply to NO Port 3, Port 1 plugged)

5: 3-Way NC (common supply to NC Port 1)

6: 3-Way NO (common supply to NO Port 3)

7: Distributor (common supply to common port 2)

8: 3-Way NC (common supply to NC Port 1, common exhaust)*

* Not available with end caps

X-System

Consult factory for larger assemblies

Insert the last two digits

of the valve 912 p/n in

this location

(See Doc.#:

912-000001-XXX

Contact factory for

information)

_

_

Sample Part ID 912 _ 6 6 01 01 _ 6 01

Description Series _ End Caps Number of Valves on Left of Diverter

X-Valve Selection Diverter Module Selection _ Number of Valves on Right of Diverter

X-Valve Selection

6: No 0-9 01-18 01: Diverter Block 1 0-9 01-18

7: Yes 02: Diverter Block 2

Options 03: Diverter Block 3

04: Diverter Block 4







this location

X-System

Total number of valves not to exceed 10 (Consult factory for additional requirements)



this location

(Contact factory for

information)

Total number of valves not to exceed 10 (Consult factory for additional requirements)

(See Doc.#:

912-000001-XXX

Contact factory for

information)


InlineAssembly

DiverterAssembly

NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,

or call and refer to Drawing #s: 890-003100-001 (inline); 890-003112-001 (diverter) and Spec. #790-002176-001.



VALVES

Min

iature V

alves

TEN-X

Valve Type:

2-Way, 2 Position, NO (NIBP)

Media:Non-Reactive Gases

Operating Environment: 0 to 50°C Operating Coil Temp: Max 85°CStorage Temperature: -40 to 70°C

Length: 32 mm (1.25 in)

Width: 9.9 mm (0.390 in)

Height: 12 mm (0.475 in)

Spacing: 10 mm (centerline)

Porting: Barb fitting for 0.078" I.D. Polyurethanetubing

Manifold mount with Ten-X seal

Weight: 0.39 oz (11 grams)

Internal Volume: 0.131 cm3 (0.0080 in3)

Leak Rate: <0.016 sccm (bubble tight) Response: <5 msec on timePressure:0 to 6 psig

Minimum Flow: 8 lpm @ 6 psi

Orifice Sizes/Equivalent Cv: 0.060"/0.032 Cv

LCP (Liquid Crystal Polymer); 430 Series Stainless Steel; 302 Series Stainless Steel/Nickel-Plated Silicone Elastomer

Physical Properties

Power: 0.5 Watt (2-Way, NO Model)

Voltage:5, 12, 24 VDC

Electrical Connections: PC Pins, 6 mm centers (all models)

Electrical

Wetted Materials


Ten-X®

Ten-X® is a 10mm solenoid valve with a two-position, two-way Normally Open (NO) design. Ten-X delivers repeatable "energized" and "de-energized"response times, low power, and flow capability to meet the specific performance requirements of Non-Invasive Blood Pressure (NIBP) devices.

✦ Delivers fast and repeatable "open" and "drop-out" response times (<5 msecincludes first shot "open" times) critical to step deflation algorithms over the entire environmental temperature range and continuous duty operationof the valve.

✦ Highest flow of any 10mm solenoid valve with a Cv of .032 and flow of 8 slpm @ 6 psig.

✦ Meets the demands for bleed and dump processes, ensuring comfortableand safe operation.

✦ Single piece body design reduces total size and part count. Fewer partsincrease reliability and reduce both the number of potential leak points andthe overall "stack-up" tolerances.

✦ Universal barb design allows for maximum installation flexibility usingeither a direct tubing connection or a radial seal for manifold assemblies.

Features

10mm Solenoid Valve

Ten-X is a registered trademark of Parker Hannifin Corporation.


Min

iatu

re V

alve

s


VALVES


TEN-X

Flow Dimensions

Sample Part ID 914 _ 1 1 05 1 _ 000

Description Series _ Elastomer Type Voltage Electrical Connection

_ Optional Accessories

1: Silicon 1: 2-Way NO

(NIBP Only)

05: 5 VDC 1: Short Pin

12: 12 VDC 2: Long Pin

Options 24: 24 VDC

000: No Accessories

Accessories may be

ordered separately at no

extra charge:

Screw:191-000112-010

Gasket: 195-000211-001

1

Model

No: Pressure/Orifice/Coil Wattage

1: 0-6 psi/0.060"/0.5 Watt


Pressure Decay

NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us

on the Web, or call and refer to Performance Spec. #790-002213-001 and Drawing #890-003150-001.



VALVES

Series 11, 25, 26

Min

iature V

alves

SERIES 11, 25, & 26

Valve Type:

2-Way or 3-Way, 2 Position(NO, NC, & Distributor)

Media:Gases and select liquids

Operating Environment: 0 to 70°C


Length: 1.73 in (43.94 mm)

Width: 0.625 in (15.88 mm)

Height: 0.67 in (17.02 mm)

Porting: 10-32 tapped ports, 1/16”, 5/64”, or1/8” Stem Barbs

Weight: 2.1 oz. (60 grams)

Internal Volume: 0.026 in3 (without fittings)

Filtration: 40 micron (recommended)

Lubrication: None required

Leak Rate: <0.016 sccm (bubble tight) Response: <30 msec cycling (2 Watts)Pressure:0 to 100 psig (0.030" orifice)0 to 70 psig (0.050" orifice)

Vacuum: 0-27 in Hg

Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 Cv

Physical PropertiesPower: 0.5, 1.0, or 2.0 Watts

Voltage:5, 12, 24 VDC + 10%

Electrical

Wetted Materials


Series 11, 25, and 26 PC Mountable Solenoid Valves convert a digital electricalsignal into a digital pneumatic output. The patented miniature design is preferred by medical and analytical OEMs worldwide and allows valves to be soldered directly onto a printed circuit board, providing both electrical termination and mechanical attachment. These valves power small cylindersdirectly or can be used to pilot larger valves that require high flow.

Flow

Body:360 HO2 Brass; 302 SeriesStainless Steel (passivated)

Stem Base:385 HO2 Brass; 303 SeriesStainless Steel (passivated)

All Others:FKM; EPDM; 430 FR SeriesStainless Steel (passivated); 302 Series Stainless Steel

✦ Offer a discrete valve design with a 200 million life cycle rating.

✦ Available in manifold mounting.

✦ Provide a range of electrical coil options, including PC mountable, spadelugs, or wire leads.

✦ Powerful enough for a range of uses that require high flow.

Features

PC Mount Digital Solenoid Valve


Min

iatu

re V

alve

s


VALVES


SERIES 11, 25, & 26


Sample Part ID 11 10 3 BV 12 P 7 7

Description Series Model Number Type Material Voltage Coil Type Pneumatic Connection Body

Pneumatic Connection Stem

No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC 0: No Barbs 0: Type 1/None

10: 0-100 psi/0.030"/2 Watts 2: 2-Way NO BV: Brass/FKM 12: 12 VDC

P: PC Mount, 4 PC Pins

6: 1/16" Barbs

Options 12: 0-70 psi/0.050"/2 Watts 3: 3-Way NC or SV: Stainless Steel/FKM 24: 24 VDC 7: 5/64" Barbs

13: 0-50 psi/0.030"/1 Watt

4: 3-Way NO

BE: Brass/EPDM

F: Wire Leads, 18" No Term

8: 1/8" Barbs

6: 1/16" Barbs*

15: 0-25 psi/0.050"/1 Watt

Distributor

7: 5/64" Barbs

16: 0-25 psi/0.030"/0.5 Watt

8: 1/8" Barbs

18: 0-10 psi/0.050"/0.5 Watt

* 1/16" Barbs not

available for 0.050"

orifice valves

Selection of stainless steel

body may extend lead time

11

Dimensions

NOTE: Series 25 and Series 26 valves are no longer standard product. Consult factory for qualified opportunities.

Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,

or call and refer to Performance Spec. #790-002075-001 and Drawing #890-003016-001.



VALVES

Valve Type:

2-Way or 3-Way, 2 Position(NO, NC, & Distributor)

Media:Non-Corrosive Gases



Length: 1.73 in (43.94 mm)

Width: 0.625 in (15.88 mm)

Height: 0.67 in (17.02 mm)

Porting: Barb fittings for 1/8" I.D. tubing or manifold mount


Internal Volume: 0.016 cm3 (nominal)

Filtration:40 micron (recommended)


Leak Rate: <0.2 sccmResponse: <30 msec cycling (2 Watts)Pressure:0 to 100 psig (0.030" orifice)0 to 30 psig (0.050" orifice)

Vacuum: 0-27 in Hg

Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 Cv

Body:PBT

Stem Base:360 HO2 Brass

All Others:FKM; 430 FR Series Stainless Steel(passivated); 302 Series StainlessSteel; Loctite® 290

Physical PropertiesPower: 0.5, 1.0, or 2.0 Watts

Voltage:5, 12, 24 VDC + 10%

Electrical

Wetted Materials


V2 ValveThe V2 valve offers a unique plastic body, which provides an economical solution without compromising on quality or reliability. Parker offers the versatile V2 in either a manifold mount design or with molded barbed fittings.This PC and manifold mountable solenoid valve converts a digital electrical signal into a digital pneumatic output.

Min

iature V

alves

Value Squared Digital Solenoid Valve

V2

✦ Cost-effective, unique Polybutylene Terephthalate (PBT) body.

✦ Manifold mount design or molded barbed fittings to fit a range of needs.

Features

Flow

Loctite® is a registered trademark of Henkel Consumer Adhesives, Inc.


Min

iatu

re V

alve

s


VALVES


V2

Dimensions


Sample Part ID V2 14 3 PV 12 P 8 8

Description Series Model Number Type Material Voltage Coil Type Body Styles Topseat Barbs

No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC 0: Manifold 0: None (Type 1)

10: 0-100 psi/0.030"/2 Watts 3: 3-Way NC or PV: Plastic/FKM 12: 12 VDC

P: PC Mount, 4 PC Pins

8: 1/8" Barbs 8: 1/8" Barbs

Options 13: 0-50 psi/0.030"/1 Watt

4: 3-Way NO

24: 24 VDC

F

14: 0-30 psi/0.050"/2 Watts

Distributor

: Wire Leads, 18"

17: 0-15 psi/0.050"/1 Watt

20: 0-6 psi/0.050"/0.5 Watt





SRS Valve

Min

iature V

alves

Manifold Mountable Plastic Solenoid Valve

SRS

Valve Type:

3-Way, 2 Position(NO, NC, & Distributor)

Media:Gases and select liquids



Length: 1.5 in (38.1 mm)

Width: 0.394 in (10 mm)

Height: 0.61 in (15.49 mm)

Porting: Manifold mount; Gasket andscrews supplied

Weight: .23 oz (6.57 grams)

Internal Volume: 0.0267 cm3

Filtration:40 micron (recommended)


Leak Rate: <0.016 sccm (bubble tight)Response: <30 msec cycling (2 Watts)Pressure:0 to 85 psig (0.020" orifice)0 to 50 psig (0.030" orifice)0 to 20 psig (0.045" orifice)

Vacuum: 0-27 in Hg

Orifice Sizes/Equivalent Cv:0.020"/0.0075 Cv0.030"/0.017 Cv0.045"/0.027 Cv

Crystalline Plastics:PBT; LNP Thermocomp®

Elastomers:FKM

Non-Corrosive Metals:302 Series Stainless Steel; 430 FRSeries Stainless Steel; CMI-B CoreIron; Electroless Nickel Plating

Physical Properties

Power: 0.5, 1.0, or 2.0 Watts

Voltage:5, 12, 24 VDC + 10%

Electrical

Wetted Materials


The 10mm SRS Series Plastic Solenoid Valve converts a digital electrical signalinto a digital pneumatic output. The SRS Valve is constructed of engineeringthermoplastics and non-corrosive metals to exceed the specifications demandedby critical applications in the life sciences.

✦ Design incorporates thermoplastics and non-corrosive metals.

✦ Offers high-density manifold mounting with convenient manifold to PCboard interface.

✦ Weighs only 0.23 ounces; perfect where low weight is critical to overall system.

Features

Flow

Thermocomp® is a registered trademark of General Electric Company.


Min

iatu

re V

alve

s


13Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciences Rev 1.5

SRS

Dimensions


Sample Part ID SRS 10 2 P V 12 M

Description Series Model Number Type Material Seal Material Voltage Electrical Connection

No: Pressure/Orifice/Coil Wattage 1: 3-Way NC P: Engineering Plastic V: FKM 5: 5 VDC F: 0.025" Square Pins, Front

10: 0-35 psi/0.020"/0.5 Watt 2: 3-Way NO 12: 12 VDC

Options 11: 0-85 psi/0.020"/1 Watt 3: Distributor 24: 24 VDC

13: 0-20 psi/0.030"/0.5 Watt

14: 0-50 psi/0.030"/1 Watt

16: 0-10 psi/0.045"/0.5 Watt

17: 0-20 psi/0.045"1 Watt

M: 0.025" Square Pins,

Manifold Interface

L: Insulated Wire Leads,

18", Front





VALVES

Min

iature V

alves

MD PRO

Valve Type:

2-Way Normally Closed

Media:Air, argon, helium, hydrogen,methane, nitrogen, oxygen, & others



Length: 1.785 in (45.34 mm)

Width: 0.625 in (16.51 mm)

Height: 0.67 in (17.02 mm)

Porting: 1/8” barbs; manifold mount with 43 micron screen


Internal Volume: 0.031 in3 (.508 sccm)

Filtration:43 micron


Oxygen Clean: Available

Leak Rate: <0.22 sccm of air (bubble tight)Response: <30 msec cyclingPressure:0 to 100 psig (See Ordering Info.)

Vacuum: 0-27 in Hg

Orifice Sizes: (See Ordering Info.)0.040" (1.02 mm)0.050" (1.27 mm)0.065" (1.65 mm)

Physical Properties

Power: 2.0 Watts maximum

Voltage:See Coil Selection under Ordering Information

Electrical Performance Characteristics

MD PROThe MD PRO is a miniature solenoid-operated proportional valve that providesapplication-specific OEM solutions.

Non-Thermally Compensated Proportional Valve

Flow

✦ Offers automated calibration.

✦ Provides repeatability across its operating range.

✦ Offers a superior combination of value and performance.

✦ Rated for 10 million life cycles.

Features


Min

iatu

re V

alve

s


VALVES


MD PRO

Dimensions


Sample Part ID MDPRO 4 V A F 8 S

Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning

F: Wire Leads, 18"

P: PC Board Mount

Options 4: 75 psid/0.040" 8: 1/8" Barbs

5: 100 psid/0.050"

A: 5.5 VDC/11 ohms/0.304 amps

6: 50 psid/0.065"

B: 8 VDC/23 ohms/0.212 amps

C: 11.5 VDC/47 ohms/0.152 amps

D: 13.5 VDC/68 ohms/0.125 amps

E: 20 VDC/136 ohms/0.091 amps

F: 29 VDC/274 ohms/0.066 amps

* Max Voltage for continuous full flow,

ambient temperature 55°C

#: Max. Operating Pressure/Orifice Size S: Standard

Cleaning

O: Oxygen Service*

*Selection of this

option affects the

valve price; contact

factory for details

V: FKM 1: Manifold Mount with

Screen*

X: Max Voltage/Resistance/Current*

* 43 Micron Screen

(Port 2)

Coil Resistance for Room Temp

Input Current for Full Flow

NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on

the Web, or call and refer to Performance Spec. #790-002206-001 and Drawing #890-003022-001.

Parker Hannifin CorporationPneutronics Divisionwww.parker.com/pneutronics


Min

iature V

alves

HF PRO

Valve Type:





Length: 1.785 in (45.34 mm)

Width: 0.625 in (16.51 mm)

Height: 0.67 in (17.02 mm)

Porting: Manifold Mount; Barbed body [5 mm (0.195”) ID Tube]





Oxygen Clean

Leak Rate: 0.5 SCCM Max. N2 at 1 and 10 psid*

Response: <30 msec cyclingPressure:0 to 50 psig

Vacuum: 0-27 in Hg

Effective Orifice Size: 0.070" (1.8mm)

* Low differential pressure represents theworst case condition due to the reverseflow (pressure-assist) nature of the valve.

Physical Properties

Power: 2.25 Watt nominal at 68° F (20°C)3 Watt max

Voltage:See Coil Selection under Ordering Information


HF PROThe High Flow MDPro controls the flow of gas proportionally to inputcurrent. The valve may be driven with DC current or Pulse Width Modulation. HF Pro achieves optimal system performance when it uses closed loop feedback.

High Flow Standard Performance Proportional Valve

Flow

HF Pro Typical Flow

0

10

20

30

40

50

60

0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175

Current (Amps)

Flow

Rat

e (s

lpm

)

Media: NitrogenCoil: 68 Ohm

10 psi20 psi30 psi40 psi50 psi

✦ Capable of 60 lpm flow and pressures up to 50 psig

✦ Face seal manifold mount or 5mm barbed body options

✦ Proven performance to 35 million life cycles

✦ Non-thermally compensated proportional valve

Features

For more information, call us at 1-603-595-1500

Min

iatu

re V

alve

s


Parker Hannifin CorporationPneutronics Divisionwww.parker.com/pneutronics

HF PRO

Dimensions


Sample Part ID HFPRO 7 V A F 8 O

Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning

F: Wire Leads, 18"

Options

8: Barbed BodyA: 5.5 VDC/11 ohms/0.304 amps





#: Max. Operating Pressure/Orifice Size O: Oxygen ServiceV: FKM 1: Manifold Mount X: Max Voltage/Resistance/Current*



7: 50 psid

NOTE: Please consult Parker Pneutronics for other considerations. For more detailed information, visit us on the Web, or call

and refer to Performance Spec. #790-002243-001 and Drawing #890-003191-001 (Manifold) or #890-003192-001 (Barbed).

Barbed Body Option

Manifold Mount Option



VALVES

Min

iature V

alves

VSO

Valve Type:





Length: 1.785 in (45.34 mm)

Width: 0.625 in (16.51 mm)

Height: 0.67 in (17.02 mm)

Porting: Barbs or 10-32 female; manifoldmount with screens



Filtration:Types 1 & 2: 17 micronTypes 3, 4, 5, & 6: 40 micron



Physical Properties

VSO®

The VSO®, Voltage Sensitive Orifice, is a miniature solenoid valve that controlsthe flow of gas in proportion to input current. You can drive the valve with eitherDC current or pulse width modulation and use closed loop feedback to deliveroptimal system performance. Medical and analytical OEMs worldwide chooseVSO as their preferred miniature proportional valve.

Normally Closed Proportional Solenoid Valve

Flow

Leak Rate: < 0.2 sccm of helium (bubble tight)Response: <30 msec cycling (2 Watts)Pressure:0 to 150 psig

Vacuum: 0-27 in Hg

Orifice Sizes: (See Ordering Info.)0.010" (0.245 mm)0.020" (0.510 mm)0.030" (0.762 mm)0.050" (1.270 mm)0.065" (1.651 mm)


Voltage:See Coil Selection under OrderingInformationOxygen and analytically clean:Standard


✦ Offers operating pressure up to 150 psig and a range of orifice sizes.

✦ Satisfies a 0.2 sccm leakage specification of He for 100 million life cyclesand offers high repeatability.

✦ Provides computer-automated calibrations and full calibration traceability.

✦ Uses either DC current or pulse width modulation with closed loop feedback to deliver optimal system performance.

✦ Maintains ideal flow through thermal compensation.

Features

VSO is a registered trademark of Parker Hannifin Corporation.


Min

iatu

re V

alve

s


VALVES


VSO

Dimensions


Sample Part ID VSONC 1 S 11 V A F 8

Description Standard Model Number Series Body Series Elastomer Coil Selection Electrical Interface Pneumatic Interface (Series 11 only except

with Option 5)

11: Series 11

C: FFKM*/Brass

F: Wire Leads, 18" 0: Manifold MountV: FKM/Brass

Options1: 150 psid/0.010"

I: FKM/Stainless Steel2: 150 psid/0.020"

H: FFKM*/Stainless Steel

A: 5.5 VDC/11 ohms/0.304 amps

3: 150 psid/0.030"

B: 8 VDC/23 ohms/0.212 amps

4: 75 psid/0.040"

C: 11.5 VDC/47 ohms/0.152 amps

5: 100 psid/0.050"


6: 50 psid/0.065"

E: 20 VDC/136 ohms/0.091 amps8: 1/8" Barbs


#: Max. Operating Pressure/Orifice

25: Series 25

(available in

nickel-plated

brass only)

1: Manifold Mount with

Screens* (this option will

affect price)

5: 10-32 Threaded

Female (Series 25)*Selection of this option affects

the valve price; consult factory

for details

P: PC Board Mount,

4 PC Pins










VALVES

Min

iature V

alves

VSO LOW FLOW

Valve Type:


Media:Air, argon, helium, hydrogen, methane,nitrogen, oxygen, & others



Length: 1.785 in (45.34 mm)

Width: 0.625 in (16.51 mm)

Height: 0.67 in (17.02 mm)

Porting: Manifold mount with 17 micron screens






Physical Properties

VSO® Low FlowThe VSO® LF (Low Flow) offers the same benefits as the VSO® valve withenhanced flow control for applications where control is critical or flow isrequired below 600 sccm. This miniature solenoid-operated valve automatesthe flow of gas in proportion to the input current.

Normally Closed Proportional Solenoid Valve

Flow

Leak Rate: <0.2 sccm of helium (bubble tight)Response: <15 msec cyclingOrifice Sizes: (See Ordering Info.)0.003" (0.076 mm)


Voltage:See Coil Selection under OrderingInformationOxygen and analytically clean:Standard


✦ Uses either DC current or pulse width modulation; closed loop feedback delivers optimal system performance.

✦ Offers computer automated calibrations and full calibration traceability.

✦ Rated for 10 million life cycles.

✦ Maintains ideal flow through thermal compensation.

✦ Highly repeatable.

Features



Min

iatu

re V

alve

s


VALVES


VSO LOW FLOW

Dimensions


Sample Part ID 910 _ 000200 _ 001

Description Series _ Model Number _ Coil Selection

Options

001: 6.5 VDC/47 ohms/0.152 amps

002: 8 VDC/68 ohms/0.115 amps

003: 12 VDC/136 ohms/0.080 amps

004: 18 VDC/274 ohms/0.060 amps

VSO, Low Flow, 0.003" orifice size

* Max Voltage for continuous full flow, ambient Temp 55°C,


Coil Resistance for Room Temp, Input Current for Full Flow

NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit

us on the Web, or call and refer to Performance Spec. #790-002160-002 and Drawing #890-003022-022.



VALVES

Min

iature V

alves

LONE WOLF

Valve Type:

2-Way Normally Open

Media:Air, nitrogen, oxygen, & others



Length: 1.785 in (45.34 mm)

Width: 0.625 in (16.51 mm)

Height: 0.67 in (17.02 mm)

Porting: Manifold mount with 43 micronscreens, 1/8" Barbs, 5/64" Barbs





Physical Properties

Lone WolfWith its patented technology, the Lone Wolf valve has the highest performancecharacteristics of any Normally Open proportional valve available on the market. This VSO® valve offers silent operation, provides repeatable high-speedperformance, and ensures maximum accuracy.

Normally Open Proportional Valve

Flow

Leak Rate: Internal: 0.2 sccm (bubble tight)External: 0.016 sccm

Response: <30 msec cycling (2 Watts)Pressure:25 psig maximum (10 psid)

Vacuum: 0-20 in Hg

Power/Orifice Sizes:0.5 Watt/0.024"1.0 Watt/0.030"2.0 Watts/0.036"

Voltage:3 to 60 VDC

Electrical Terminal:PC Mount, Spade Lugs, 18” Wire Leads


✦ Achieves rapid, stable performance.

✦ Enhances system control and patient comfort.

✦ Maintains ideal flow through Normally Open valve with thermal compensation.

✦ Extremely reliable.

Features



Min

iatu

re V

alve

s


VALVES


LONE WOLF

Dimensions


Sample Part ID LW 1 B V A F 8

Description Series Model Number Material Elastomer Coil Resistance Electrical Interface Pneumatic Interface

A: 11 ohms F: Wire Leads, 18"-19" 0: Manifold Mount

B: 23 ohms P: PC Board Mount, 4 PC Pins

Options 1: 0-10 psi/0.024"/0.5 Watt C: 47 ohms

2: 0-20 psi/0.030"/1 Watt D: 68 ohms

F: 274 ohms8: 1/8" Barbs

1: Manifold Mount with

Screens* (this option

will affect price)

No: Pressure/Orifice*/Coil Wattage V: FKMB: Brass

*Median Effective Orifice

3: 0-25 psi/0.036"/2 Watt




Catalog PLS01-1001/USEPC

Electron

ic Pressu

re Control

VSO-EP

Valve Technology:

Thermally compensated proportional valve

Media:Non-corrosive gases



Length: 2.25 in (57.15 mm)

Width: 2.25 in (57.15 mm)

Height: 1.25 in (31.75 mm)

Porting: 10-32 female ports

Physical Properties

VSO-EP™

The VSO-EP™ Electronic Pressure Control Unit converts a variable electrical control signal into a variable pneumatic output. Used to control critical pressure,the VSO-EP replaces manual regulators, needle valves, flow controllers, andbleed orifices, providing integral closed loop proportional control. This productuses Pneutronics’ patented VSO® proportional valve and offers significantimprovements over dual valve controllers. VSO-EP is used for carrier gas flowcontrol, microfluidic flow control, vacuum pump control, and for aspirate /dispense applications.

Electronic Pressure Control Unit

Pressure Ranges: 0-15 psig0-30 psig0-50 psig0-100 psig

Pressure Accuracy:+ 0.2% FS typical+ 1.5% FS max

Response: <15 msec(Response time to target pressureis output volume dependent)

Linearity:< +1.0% FS

Maximum Supply Pressure: 150% of pressure transducer rating

Power: 24 VDC + 10%

Input Control Signal:0-5 VDC standard4-20 mA available

Monitor Output Voltage:0-5 volts

Current Requirement:<150 mA

Electrical Connector:RJ-45


✦ Offers silent operation.

✦ Ensures high accuracy and unparalleled resolution.

✦ Tested for long life.

✦ Offers internal closed loop control and external pressure sensor capability*.

✦ OEM application-specific configurations available.

*Accessories Required

Features

VSO is a registered trademark and VSO EP is a trademark of Parker Hannifin Corporation.



Parker Hannifin CorporationParker Life Scienceswww.parker.com/lifesciencesRev 1.5

VSO-EP

Drawing


Sample Part ID VSO-EP SC 0-5 0-100

Description Series Configuration Electrical Input Pneumatic Range

SC: Standard Pressure Controller 0-5: 0-5 VDC

AC: Head Pressure Controller

0-2, 5, 7, 15, 30, 50, 70, 100 (psi)

Options

NOTE: Please consult Parker Life Sciences for other considerations. For more

detailed information, visit us on the Web, or call and refer to Performance

Spec. #790-002202-001 and Drawing #890-003146-001.

CAT 5e Plug-in (RJ-45) Connector (included)

Signal RJ-45 Pin # Color

Main Power, 24 VDC 1 White w/ Orange

Input Control Signal, 0-5 VDC 2 Solid Orange

Monitor Signal Output, 0-5 VDC 3 White w/ Green

System Ground 4 Solid Blue

Custom configurations are available.Contact factory for details.

Configurations

Ele

ctro

nic

Pre

ssu

re C

ontr

ol



Electron

ic Pressu

re Control

VSO-EV

Valve Technology:





Length: 2.25 in (57.15 mm)

Width: 2.25 in (57.15 mm)

Height: 1.25 in (31.75 mm)


Physical Properties

VSO-EV™

The VSO-EV™ is a pressure controller specifically configured and optimized for vacuum pressure control. The VSO-EV converts a variable electrical control signal into a closed-loop, tightly regulated pneumatic output. Oftenused for aspirating liquid samples in gas-over-liquid flow control, as well asfor pipetting and dispensing nano-liter volumes, the VSO-EV offers users a choice of either an external transducer or an internal sensor to close thecontrol loop around critical system parameters. This EPC is well suited forhigh precision automated laboratory instruments, meeting the most stringentseparation and detection requirements.

Vacuum Control Module

Vacuum Ranges: 0-345 mBarCustom units available





Power: 24 VDC + 10%






✦ Low weight and low power consumption

✦ Ensures high accuracy and unparalleled resolution.

✦ Tested for long life.

✦ Offers internal closed loop control and external pressure sensor capability*.

✦ OEM application-specific configurations available.

*Accessories Required

Features

VSO is a registered trademark and VSO EV is a trademark of Parker Hannifin Corporation.


Ele

ctro

nic

Pre

ssu

re C

ontr

ol



VSO-EV

Drawing


Sample Part ID VSO-EV EV 0-5 0-VAC


0-5: 0-5 VDC

Options

EV: Vacuum Controller 0-VAC: 0-VAC*

* 0 to -345 mBar for vacuum; Consult factory

for custom options

NOTE: Please consult Parker Life Sciences for other considerations. For more

detailed information, visit us on the Web, or call and refer to Performance

Spec. #790-002202-001 and Drawing #890-003146-001.








Configurations



OEM-EP

Electron

ic Pressu

re Control

Miniature Pressure Control Module

OEM-EP

Valve Technology:





Length: 1.02 in (26 mm)

Width: 1.06 in (27 mm)

Height: 2.36 in (60 mm)


Physical Properties






Main Power: 24 VDC + 10%

Input Control Signal:0-5 VDC standard



Electrical Connector:6 pin miniature interface cableincluded


✦ Silent operation

✦ Long life

✦ High accuracy

✦ Low power consumption

✦ “Set and Forget” closed loop control

Features

Measuring just 26mm x 27mm x 60mm, the OEM-EP (Electronic PressureControl Unit) is the smallest electronic pressure controller available on themarket, configured specifically for the analytical instrumentation and life science OEM markets.

The OEM-EP can be configured to control pressure or flow and can replacemanual regulators, flow controllers, and needle valves, providing integralclosed loop proportional control for sensitive instrumentation applications.This product uses Parker's patented VSO® proportional valve, as well as theproven circuitry of its successful larger products.

Typical applications include:

✦ Carrier gas flow control ✦ Gas over liquid flow control

✦ Microfluidic flow control ✦ Liquid dispensing

✦ Hydro-dynamic focusing




OEM-EP

Drawing


Sample Part ID OEM-EP SC 0-5 0-100


SC: Standard Pressure Configuration 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)


Options

NOTE: Please consult Parker Life Sciences for other considerations.

For more detailed information, visit us on the Web.


Configurations

Ele

ctro

nic

Pre

ssu

re C

ontr

ol



VSO-GC

Electron

ic Pressu

re Control

Gas Chromatography Flow Control Module

VSO-GC

Valve Technology:





Length: 2.25 in (57.15 mm)

Width: 2.25 in (57.15 mm)

Height: 1.25 in (31.75 mm)


Physical Properties






Power: 24 VDC + 10%






✦ Silent operation

✦ Long life

✦ High accuracy

✦ Unparalleled resolution

✦ GC-specific proportional valve

✦ Internal closed loop control

✦ Pressure signal output

Features

The VSO-GC, Electronic Pressure Control (EPC) Unit, converts a variable electrical control signal into a variable pneumatic output. By providing integralclosed loop control, it replaces manual regulators, costly multiple function control valves, and needle valves. This product uses Parker Hannifin's patentedVSOTM proportional valve and offers application-specific integrated pneumaticpressure control for Gas Chromatography (GC) applications.


✦ Column Head Pressure Control

✦ Split Flow Control

✦ Carrier Gas Flow Control




VSO-GC

Drawing


Sample Part ID VSO-GC AC 0-5 0-100*


SF: Split Flow Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)


Options

* Not required for SF NOTE: Split Flow Controller

accommodates varying inlet pressures.









NOTE: Valve sizes are optimized for use in Gas Chromatography applications. Customs performance readily available; consult factory for options. CAT 5e cable included.

Schematic diagram of VSO-GC

VSO-GC Block Diagram Representation

Configurations

Ele

ctro

nic

Pre

ssu

re C

ontr

ol



VSO-HP

Electron

ic Pressu

re Control

High Performance Pressure Controller

VSO-HP

Valve Technology:

Thermally compensated proportional valve; digital dump valve








Physical Properties






Main Power: 24 VDC + 10%

Input Control Signal:0-5 VDC standard



Electrical Connector:6 pin miniature interface cableincluded


✦ Stable pressure control with minimal thermal drift

✦ Rapid depressurization

✦ High accuracy; high repeatability

✦ Low power consumption

✦ Optional 5 VDC supply output

✦ Configurable for pressure controlor flow control

✦ External pressure sensor capability

✦ Silent operation; long life

Features


Used in analytical and OEM instrument applications, the VSO-HP delivers integral closed loop proportional control with the highest level of accuracy and stability. This miniature controller, measuring only 39 x 42 x 71mm, worksideally in High Performance Liquid Chromatography (HPLC) applications, eliminating time-consuming temperature and pressure adjustments throughits superior design and performance.

The VSO-HP ensures stable flow levels with features such as monitor voltagefeedback and an LED display for pressure regulation. It also offers rapiddepressurization, which results in a fast response time and has an optionalexternal sensor for expertly controlling pressure in required applications.

The VSO-HP can be configured to control pressure or flow, replacing manualregulators, flow controllers, and needle valves. This product uses Parker'spatented VSO® proportional valve and offers precise motion control withParker pneumatic cylinders, such as the Series SRX.


✦ Carrier gas flow control ✦ Gas over liquid flow control

✦ Hydro-dynamic focusing ✦ Microfluidic flow control

✦ Liquid dispensing




VSO-HP

Drawing


Sample Part ID VSO-HP SC 0-5 0-100


SC: Standard Pressure Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, 70, 100 (psi)


Options



VSOValve

Application

PressureSensor

0-5 VDC pressuremonitor output

S-11Valve

atm

BleedOrifice


Configurations

Ele

ctro

nic

Pre

ssu

re C

ontr

ol

Valve Type:

2-Way Normally Open




Length: 1.01 in (25.6 mm)

Width: 0.394 in (10 mm)


Porting: 1 port, 0.118" (3 mm) O.D.; suitablefor 0.078 I.D.; Urethane tubing

Weight: .27 oz (7.71 grams)

Internal Volume: 0.026 cm3

Filtration:None required


Physical Properties

The PND Series is a miniature, low cost, application-specific, two-wayNormally Open exhaust or "dump" valve. Perfect for safety-oriented applications that require pressure relief to atmosphere upon power loss.

Leak Rate: 0.016 sccm (bubble tight)

Response: <100 msec cyclingPressure:0 to 6 psig holding

Vacuum: 0-27 in Hg

Orifice Sizes/Equivalent Cv:0.030"/0.017 Cv0.050"/0.035 CvLarger sizes available in 15 mm frame

Elastomer:Silicon; Nickel-Plated Steel

Frame:SPCC (Treatment: MFZn2-c)

All Other:Polybutylene Terephthalate (PBT);304 Series Stainless Steel

Power: 0.5 Watt or less

Voltage:3, 6, 12 VDC

Electrical

Wetted Materials


Sample Part ID PND _ 05 A _ 12

Description Series _ Watts (RatedPower at 20°C)

Orifice Size _ Voltage

05: 0.5 Watt D: 0.030" 03: 3 VDC

A: 0.050" 06: 6 VDC

Options 12: 12 VDC

Note: With Orifice Size at 0.050", the frame width and height increases 0.118" (3mm)

✦ Normally Open exhaust valve in a small package size.

✦ Works well in miniature applications such as in Non-Invasive BloodPressure (NIBP) devices.

✦ Provides small size and low cost.

✦ Offers low holding voltage.

Features


For more detailed information, visit us on the Web, or call and refer to

Performance Spec. #790-002198-001 and Drawing #s: PND-05A-DWG

and PND-05D-DWG.




VALVES PND

Pneutronics New Dump ValveMin

iature V

alves

PND Series


Min

iatu

re V

alve

s


VALVES


PND

Dimensions

Valve Type:

Normally OpenNormally Closed

Pipe Size: 1/8" NPT

Orifice Diameters:Normally Open1/32", 3/64", 3/32"

Normally Closed1/32", 3/64", 1/16", 1/8"

Valve Diameter: 1 in (25.4 mm)

Height: 2.69 in (68.33mm)


Maximum Ambient Temperature105°F

Universal Mounting Bracket: B19006

Filtration:40 micron recommended

Lubrication: None required, but will increase life

Compatible Fluids:Lubricated air, non-lubricated air,inert gases, water, hydraulic fluids,petroleum products, and additionalfluids compatible with materials ofconstruction

Operating Speed: Up to 600 cycles per minute

Vacuum: Up to 5 micron

Physical Properties

Power Consumption: 7 Watts

Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60

Other voltages available uponrequest Coil Type:Class A

Electrical Standard Material Options


The small stainless steel B Series valves convert electrical signal to controlmedia flow. Available as Normally Closed (B2) and Normally Open (B11), thesebubble tight valves are 100% tested and will perform consistently for up to 20 million cycles.

Body: Series 303 Stainless Steel

Seals: NBR (Nitrile), FKM

Sleeve: Series 304 Stainless Steel

Plunger: 430F FR Stainless Steel

Stop: 430 FR Stainless Steel

Springs: Stainless Steel (18-8)

Shading Ring: Copper (AC only)

Orifice: Series 303 Stainless Steel

✦ Multipoised; available in a range of mounting positions.

✦ Rated pressures up to 400 psi allow maximum control over gases and liquids.

✦ Available with 1/8" NPT ports for process connection and 18" lead wires forelectrical connection.

Features



VALVES

Min

iature V

alves

B SERIES

Configurations

General Purpose 2-Way Direct Acting Valves

B Series


Min

iatu

re V

alve

s


VALVES


B SERIES


Sample Part ID B2 DA 1400

Description Series Coil Enclosure Max. Operating Pressure

B2 B2

DA: Grommet 1400: 400 psi (AC/DC)

Options 1250: 250 psi (AC/DC)

B11 1175: 175 psi (AC/DC)

DK: Grommet 1052: 50 psi (AC)

1026: 25 psi (DC)

B11

1400: 400 psi (AC/DC)

1200: 200 psi (AC/DC)

1040: 40 psi (AC/DC)

B2: 2-Way, Normally Closed,

NBR Seals

B11: 2-Way, Normally Open,

FKM Seals


*When ordering, please state voltage.

Example: B2DA1250, 24 VDC

Dimensions

NOTE: Universal Mounting Bracket B19006,shown above, is a separately ordered item.



VALVES

Min

iature V

alves

B SERIES

B SeriesGeneral Purpose 3-Way Solenoid Valve

Valve Type:

Normally Open, Normally Closed,Normally Closed - Exhaust toAtmosphere, Directional Control,Multipurpose

Pipe Size: 1/8" NPT

Orifice Diameters:1/32", 3/64", 1/16", 3/32"

Valve Diameter: 1 in (25.4 mm)

Height: 2.26 in (57.4 mm)



Universal Mounting Bracket: B19006




Physical Properties

The three-way B Series valves are available in several configurations, includ-ing Normally Closed and Normally Closed-Exhaust to Atmosphere (B13 andB13A), Multipurpose (B14), Normally Open (B15), and Directional Control (B16).


Vacuum: Up to 5 micron


Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60

Other voltages available uponrequestCoil Type:Class B



Body: Series 303 Stainless Steel

Seals: NBR, FKM






Orifice: Series 303 Stainless Steel

✦ Stainless steel body with high flow capacity.

✦ Available with 1/8" NPT ports.

✦ Can be used as two-way Normally Open or Normally Closed by pluggingone port.

✦ Multipurpose valves accept inlet pressure or vacuum at any port.


Features

Configurations


Min

iatu

re V

alve

s


VALVES


B SERIES


Sample Part ID B13 DK 1175


B13: 3-Way, Normally Closed (NC) DK: Grommet B13 & B13A

1200: 200 psi (AC/DC)


B14: 3-Way, Multipurpose 1100: 100 psi (AC/DC)

B15: 3-Way, Normally Open 1040: 40 psi (AC/DC)

B16: 3-Way, Directional Control B14

1150: 150 psi (AC/DC)

1100: 100 psi (AC/DC)

1075: 75 psi (AC)

1030: 30 psi (DC)

B15

1200: 200 psi (AC/DC)

1150: 150 psi (AC/DC)

1125: 125 psi (AC/DC)

1040: 40 psi (AC/DC)

B16

1250: 250 psi (AC/DC)

1200: 200 psi (AC/DC)

1175: 175 psi (AC/DC)

1050: 50 psi (AC/DC)

B13A: 3-Way, NC, exhaust to

atmosphere

NOTE: Please consult Parker Life

Sciences for other considerations.


Example: B13DK1175, 120/60

Dimensions



VALVES

Valve Type:


Pipe Size: 1/8" NPT dry seal


Valve Diameter: 1.19 in (30.23 mm)

Height: 2.31 in (58.67 mm)

Weight: 12 oz with Conduit (342.86 grams)11 oz with Grommet (314.29 grams)


Universal Mounting Bracket: MECHB5



Compatible Fluids:Lubricated air, non-lubricated air, inertgases, water, hydraulic fluids, petroleumproducts, Freon®, and additional fluidscompatible with materials of construction

Water over 180°F, Freon®, and some petroleum products may require sealmaterial modifications.

Physical Properties

C SeriesThe two-way Normally Closed C Series valves offer a soft synthetic plungerinsert with a precision-machined seat, which provides a tight seal with longinsert life. These valves are 100% tested and will perform consistently up to 20 million cycles.

Min

iature V

alves

General Purpose 2-Way Direct Acting Valves

C SERIES


Response Time: AC: 4-8 msec to open or closeDC: 10-15 msec to open or close

Vacuum: Down to 5 microns(0.005 Torr, 2 x 10-4 in Hg)

Maximum Operating PressureDifferentialUp to 275 psi


Voltage:DC: 12, 24 AC: 24/60, 120/60, 240/60

Other voltages available uponrequest Coil Enclosures:Grommet; 1/2” NPT Conduit

Electrical

Standard Material Options


Body: Brass (Stainless Steel available)

Seals: NBR (FKM, and EPDM available upon request)






✦ Includes only two moving parts: the stainless steel spring and the plunger.

✦ Range of compatible media includes petroleum products and Freon®.

✦ Up to 275 psi of operating pressure.

✦ Measures 2 5/16" in height and 12 oz in weight.

✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.


Features

Configurations

Freon® is a registered trademark of E.I. du Pont de Nemours and Company.


Min

iatu

re V

alve

s


VALVES


C SERIES

Dimensions

Sample Part ID C2 DA 1277


DA: Grommet 1277: 275 psi (AC)

DB: 1/2" Conduit 1251: 250 psi (DC)

Options 1132: 130 psi (AC)

1081: 81 psi (DC)

1092: 90 psi (AC)

1051: 50 psi (DC)

1062: 60 psi (AC)

1031: 30 psi (DC)

C2: 2-Way, Normally Closed



Example: C2DA1277, 12 vdc


NOTE: Universal Mounting Bracket MECHB5,shown left, is a separately ordered item.

Valve Type:

Normally Open, Normally Closed,Normally Closed - Exhaust toAtmosphere, Multipurpose

Pipe Size: Body Ports 1/8" NPTAdapter 1/8" PTF



Height: 3.30 in (83.82 mm)




Physical Properties

The three-way C Series valves, including C3 & C3A (Normally Closed andNormally Closed-Exhaust to Atmosphere), C4 (Multipurpose) and C5(Normally Open) convert electrical signal to controlled media flow. Thesebrass valves are available with 1/8" NPT ports for media connection and 18" lead wires for electrical connection.


Vacuum: Down to 5 microns

Maximum Operating PressureDifferentialUp to 175 psi

Power Consumption: 7.5 Watts

Voltage:DC: 12, 24AC: 24/60, 120/60, 240/60

Other voltages available uponrequest



Body: Brass



Seals: NBR and FKM

✦ Accommodates up to 175 psi of system pressure depending on flow requirements.

✦ Tested to perform consistently for up to 20 million cycles.

✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.


Features



VALVES

Min

iature V

alves

C SERIES

Configurations

General Purpose 3-Way Direct Acting Valve

C Series


Min

iatu

re V

alve

s


VALVES


C SERIES

Dimensions


Sample Part ID C3 DK 1175


C3: 3-Way, Normally Closed (NC) DK: Grommet C3 & C3A

1175: 175 psi (AC/DC)


C4: 3-Way, Multipurpose 1075: 75 psi (AC/DC)

C5: 3-Way, Normally Open 1050: 50 psi (AC/DC)

C4

1150: 150 psi (AC/DC)

1075: 75 psi (AC/DC)

1050: 50 psi (AC)

1031: 30 psi (DC)

C5

1175: 175 psi (AC/DC)

1100: 100 psi (AC/DC)

1060: 60 psi (AC/DC)

C3A: 3-Way, NC, exhaust to

atmosphere

DM: 1/2" NPT Conduit



Example: C3DK1175, 12 vdc

Valve Type:

2-Way: Normally Open, Normally Closed

3-Way: Normally Open, Normally Closed,Multipurpose, Directional Control

Orifice Diameters:Normally Open1/32", 3/64", 1/16", 5/64", 3/32"

Normally Closed1/32", 3/64", 1/16", 5/64", 3/32", 1/8", 5/32"


Height: 2.08 in (52.83)

Weight: 8 oz (228.57 grams)

Maximum Ambient Temperature68°F for continuous duty cycle

Mounting:Standard: Two 8-32 tapped holes in bottom of valve

Optional: Universal mounting bracketB19006 is available

Process Connections:1/8" NPTManifold mount: cavity, screw-in



Compatible Fluids:Air, Inert Gas, Water, Oil

Physical Properties

The 3000 Series two-way and three-way valves convert electrical signal tocontrol media flow. Available as Normally Open (Series 3121) or NormallyClosed (Series 3129), these small stainless steel or brass bubble tightvalves will perform consistently for up to 20 million cycles.

Operating Speed: Up to 600 cycles per minuteContinuous Duty

Response Time: 8-16 msec to open or close

Vacuum: Down to 5 microns depending on application

Power Consumption: 6 Watts7.5 Watts for 24/603 Watts

Voltage:DC: 12, 24 AC: 24/60-24/50, 110/50-120/60,220/50-240/60

3-Way Connections:12" leads; 1/4"tab

3-Way Coil Enclosure Options:1/2" Conduit; Grommet; Yoke;Integrated with tab connection;Integrated with 12" leads



Body: Brass or Series 303 StainlessSteel

Seals: NBR, FKM, EPDM



Manifold Body: Aluminum

Flux Plate: Plated Steel

Housing: Plated Steel

Integrated Coil Encapsulant: Nylon

✦ 2-Way: Rated for 800 psi for gases and liquids.

3-Way: Rated for 200 psi for gases and liquids.

✦ Available with 1/8" NPT ports or manifold mount for process connectionand either lead wires or tabs for electrical connection.

✦ UL and CSA component recognition.


Features



VALVES

Min

iature V

alves

3000 SERIES

3-Way Configurations

3000 Series2-Way & 3-Way Direct Acting Valves


Min

iatu

re V

alve

s


VALVES


3000 SERIES


Sample Part ID 3 1 2 1 B B N1 A

Description Series Operations Type Flow Pattern Family Body Material(Pipe Size)

Orifice

3000 2: 2-Way 1: Normally Closed B B: Brass (1/8” NPT only) A: 1/32"

3: 3-Way 3: Multipurpose J: Operator (No Body)(5/16"- 24 UNF) E: 3/64"

Options 8: Directional S: 303 Stainless Steel(3/4"-32 UNF)

G: 1/16"

J: 5/64"

N: 1/8"

Q: 5/32"

9: Normally Open,

Ported Sleeve

A6: Male Straight Thread

N11: Female National Pipe

1/8”

1: Direct Acting,

6 Watt

9: Direct Acting,

3 Watt

L: 3/32"

A7: Male Straight Thread

(1/8” NPT only)

Process Connection

_ E 00 NO M1S1 P0

_ Seal Material Mechanical Option Housing Coil Voltage

00: None P0: 24/50-60 Hz ACE: EPDM

N: NBR

V: FKMRR: Grommet

YY: Yoke

C1: 12 VDC

C2: 24 VDC

NOTE: For all 6W coils,

actual wattage for 24/60

Voltage is 7.5

N0: Cleaned for

Oxygen Service

HT: Helium Leak

Tested

T1J1: Taped 12" Leads, 6W,

Class B

T3J1: Taped 12" Leads, 3W,

Class B

AD: 1/8" NPT

Sleeve Adapter

(3-Way Only)

C#: Aluminum,

Female 1/8" NPT,

2, 3, or 4 Station

Cavity Manifold

Block

N0: No Housing

(Integrated Coil

Only)

M1S1: Integrated Molded,

1/4" Tab, 6W, Class B

M3J5: Integrated Molded,

12" Leads, 6W, Class B

M6J5: Integrated Molded,

12" Leads, 3W, Class B

Q3: 220/50 Hz,

240/60 Hz AC

P3: 110/50 Hz,

120/60 Hz AC

(Taped Coil Only)

(Taped Coil Only)

Series 3000 Part ID Continued(20 characters total)

NOTE: Please consult Parker Life

Sciences for other considerations.

2-Way Configurations Dimensions

Valve Type:

2-Way, Normally Closed proportional

Orifice Diameters:1/32", 3/64", 1/16", 5/64", 3/32"

Media:All gases compatible with valve materials

Operating Environment: Ambient: 14 to 122°F (-10 to 55°C)

Media: 0 to 180°F (-18 to 82°C)



Height: 1.79 in (45.5 mm)

Porting: 1/8" NPT

Physical Properties

The BP Series valve is an analog proportional device that digitally modulates the current supplied to the coil. The mechanism that opens and closes the BPvalve's flow orifice moves in a linear manner in response to the varying coil current and is easily controlled by a user input signal.

Flow

Response: Complete cycle, Off-Full, Open-Off:

40 msec cycling at zero pressure100 msec cycling at max pressure

Hysteresis:10% of full flow (in open loop

applications)

Valve Repeatability: 5% when operating within LinearControl Range

Valve Orientation:Multipoised: can be mounted in any position

Power: 7 Watts maximum

Voltage:12-24 VDC

Enclosure:General Purpose, NEMA 1

Coil Type:Class A


Standard Material Options

Body: Stainless Steel

Seals: NBR, FKM

Sleeve: Stainless Steel

Plunger: Stainless Steel

Stop: Stainless Steel

Springs: Stainless Steel

Orifice: Stainless Steel

✦ Offers longer valve life and consumes less power than similar proportional valves.

✦ Eliminates pressure or flow spikes by using linear flow control.

✦ Provides faster response time.

✦ Offers simplified control systems.

✦ Versatile: multipoised valves allow mounting in any position.

Features



VALVES

Min

iature V

alves

BP SERIES

Proportional 2-Way Valves

BP Series

BP Proportional Valve Flow Curve

% Control Signal(X)

LinearControl

Range(Y)

Zero Offset Point (point where flow begins)

typically between 30-40% ofcontrol signal, depending on

actual system pressure


Min

iatu

re V

alve

s


VALVES


BP SERIES

Dimensions


Sample Part ID

Description Series Orifice Size C Max. Operating Pressure

External Control

BP Flow at Maximum psi Flow at 10 psi 0-2V 0-5V 0-10V 4-20mA

1/32” 0.02 200 psi 0-50,000 sccm 0-8,000 sccm BP2EV0001 BP2EV0012 BP2EV0013 BP2EV0029 BP2DA1201


Options 1/16” 0.08 60 psi 0-75,000 sccm 0-30,000 sccm BP2EV0003 BP2EV0005 BP2EV0009 BP2EV0020 BP2DA1061


3/32” 0.16 25 psi BP2DA1026Consult Factory

BP2EV0001

Flow Ranges Control Input Signal ORv

NOTE: External control valves do not include electronics in valve number (only the coil is provided).

Please consult Parker Life Sciences for other considerations.



VALVES

Value Added

Min

iature V

alves

Value-Added Products

MANIFOLDS

✦ Mixed pneumaticlogic assembly

✦ Pressed in barbedfittings

5 Position SRS ModelPneumatic Manifold

✦ Mixed pneumaticlogic design

✦ Ultra-miniaturedesign with PCB for mass termination

10 Position X-Valve®

Pneumatic Manifold

✦ Mixed gassinglogic designincludes VSO®

proportionalvalves, X-Valve®,pressure switch,pressure sensors,and PCB interface

Gassing Control System

✦ Mixed pneumaticlogic assembly

✦ Integrated pressuresensors

✦ Mass termination ofsensors & valves



✦ Tested to 1 x 10-7

cc/sec/atm Helium

✦ Assembly testedon mass spectrometer

Vacuum Gas Control Module

✦ Integrated circuitboard

✦ Mass electricaltermination

✦ Splash-proof vinylhood


Pneumatic Manifold

VSO and X-Valve are registered trademarks of Parker Hannifin Corporation.


Min

iatu

re V

alve

s


VALVES


MANIFOLDS

✦ Low cost solution

4 Position V2 Pneumatic Manifold

✦ Circuit board withmass electrical termination

✦ Multiple layermanifold

✦ Integrated volumechambers

23 Station/Multiple ValvePneumatic Manifold

✦ Integrated pressure/vacuum sensors

✦ Mixed pneumaticlogic design

✦ Ultem® manifoldpressure/vacuumsensors


Pneumatic Manifold

✦ Quick connect fittings

✦ Circuit board withmass electricaltermination

6 Position VSO® Proportional ValvePneumatic Manifold Assembly

✦ Integrated circuitboard mounting

✦ Mass electricaltermination


✦ Circuit board withtransducers



Ultem® is a registered trademark of General Electric Company.

FOR OTHER MANIFOLD TECHNOLOGY OPTIONS, PLEASE CONTACT PARKER LIFE SCIENCES TODAY!

Digital and Proportional Miniature Solenoid Valves - Rometec · X-Valve® is a two-position,...

Documents

Transcript of Digital and Proportional Miniature Solenoid Valves - Rometec · X-Valve® is a two-position,...