COMMON-RAIL – UNIT-INJECTOR - HEUI

DIESEL TECHNOLOGY SPECIALIST SERVICE:

95045 MISTERBIANCO (CT) ITALY – Via Salvatore Averna, 3Tel. +39 095 481463 PBX – Fax +39 095 476164 – Info-Tech: Tel. +39 095 481855 PBX

www.coronadiesel.it – E-mail: info@coronadiesel.it

◊ Testing any type of injector either magnetic or Piezo;◊ Injectors Coding (also coding ISA on Piezo Bosch);◊ Automatic or manual test;◊ Injector angle curve visualization;◊ Self learning on new injectors;◊ Printed reports;◊ Chiller supplied;◊ Maximum pressure 2500 BAR

ELECTRICAL CONTROL

- Coil Inductor- Capacitor (only on Piezo injectors)- Coil Resistor- Insulation- Current max

MECHANICAL-HYDRAULIC CONTROL

- Static seal (LEAKAGE)- Delivery at max engine (MAX DELIV.)- Delivery at idle engine (MIN DELIV.)- Pre-Injection delivery (IMA DELIV.)- Starting value (START INJ)- Start injection dynamic response

(START IMA)- Injector coding

PRINTING REPORT

COOLER

P.N.: CD-RD17

ARTICLES INCLUDED:

STANDARD EQUIPMENT

(Includes all current types of injector cables and back-flow attacks)

ARTICLES ON REQUEST:

AVAILABLE IN CATALOG ALL TYPES OF ADAPTERS FOR COMMON-RAIL

TRUCK INJECTORS

ELECTRICAL CONTROL

- Coil Inductor- Capacitor (only on Piezo injectors)- Coil Resistor- Insulation- Current max

MECHANICAL-HYDRAULIC CONTROL

- Static seal (LEAKAGE)- Delivery at max engine (MAX DELIV.)- Delivery at idle engine (MIN DELIV.)- Pre-Injection delivery (IMA DELIV.)- Starting value (START INJ)- Start injection dynamic response (START IMA)- Injector coding

SCREEN REPORT

PRINTING REPORT

Factory default value comparison reports with individual injector coding

InjectorEUP

InjectorDelphi 1.1

InjectorCR

InjectorDelphi 1.5

InjectorDenso

InjectorL’Orange

InjectorCR Truck

InjectorBoschPiezo

Injector DensoPiezo

Injector Siemens

Piezo

COMMON-RAIL INJECTORS SOFTWARE APPLIED TO ￭ 555-DDP/R ￭ 555-DDP/4-R ￭ 555-8G / N ￭ 555- @√ √ √ √

PLOT CARATTERISTIC

The test draws five curves at five differentpressures; delivery is measured continuouslyby varying injection time from a max of 1200us up to a minimum of 0 us through 0,020 ussteps.The curve drawn (1) is normally between themin (2) and the max (3) curve. The column onthe left shows details about minimum, nominaland maximum delivery, as well as injectiontime current absorbtion and test result.

Note : The points indicated are approximate.

InjectorXPI

InjectorHPI

InjectorHDP

InjectorCaterpillar

InjectorDenso

Komatsu

InjectorMTU

InjectorDenso John

Deere

InjectorECR

1

2

3

Start

MaxLoad

IntermediateLoad

Pre-Injection2

Pre-Injection1

PRINTING REPORT

COMMON-RAIL INJECTORS SOFTWARE APPLIED TO ￭ 555-DDP/R ￭ 555-DDP/4-R ￭ 555-8G / N ￭ 555- @√ √ √ √