Diamond, Coring and Sawing - psc-mongolia.com Coring and...195 Diamond Coring and Sawing Diamond...

194

Hilti. Outperform. Outlast.

Diamond, Coring and Sawing

195

Diamond Coring and Sawing

www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Diamond Drilling Tools Diamond coring tool DD EC-1 196, 203-206 Diamond coring tool DD 120 197, 203-206 Diamond coring tool DD 150-U 198, 203-206 Diamond coring tool DD 160 199, 203-206 Diamond coring tool DD 200 200, 203-206 Diamond coring tool DD 350 201, 203-206 Diamond coring tool DD 500 202-206

Diamond Drilling Consumables Diamond core bit DD-C T2 207 Diamond core bit DD-C T4 207 Connection end DD 208 Diamond core bit DD BI PL 320 208 Diamond core bit DD B PL 320 208-209 Diamond core bit DD B PS 250 320 209 Diamond core bit DD B PL 430 210 Change module DD CM PL 210-211 Change module DD CM PS 211 Diamond core bit DD-B H4S 211-212 Change module DD-CM H4S 213

Diamond Sawing Machines Wall saw DST 10-E 214, 222-224 Wall saw DS TS20-E 215, 222-224 Wall saw DS TS 32 / D-LP 32 216, 222-224 Saw head DS TS 32 217, 222-224 Hydraulic power unit D LP 32 218, 222-224 Wire saw DS WS 15 219, 222-224 Wire saw DS WS 10 220, 222-224 Wire saw DS WSS30 221-224

Diamond Sawing Consumables Wall saw blade DS-BT HI C-10E 225 Wall saw blade DS-BT HI/HY C-20E 225 Wall saw blade DS-BT HI/HY C-H 225 Wall saw blade DS-BT HI CM-H 226 Wall saw blade DS-BT CM-H/CP+ 226 Diamond wire DS-W Steel 20% 226, 228 Diamond wire DS-W Steel 100% 226-228 Diamond wire DS-W 10.7 227-228 Diamond wire DS-W dry 227-228

196

Diamond Drilling Tools

www.hilti.com

Ordering designation Package contents Sales pack quantity

Item number

DD EC-1 110V GB 1x Diamond coring tool DD EC-1 110V GB, 1x Case 1 pc 336736DD EC-1 230V CH 1x Diamond coring tool DD EC-1 230V CH, 1x Case 1 pc 336741DD EC-1 230V EU1 1x Diamond coring tool DD EC-1 230V EU, 1x Case 1 pc 336739DD EC-1 230V GB 1x Diamond coring tool DD EC-1 230V GB, 1x Case 1 pc 336742

Related products on pageInserts 195, 207

Diamond coring tool DD EC-1

Technical dataNumber of gears 1

Rotation speed gear 1 under no load

9200 rpm

Drilling range - wet w/ stand - max.

35 mm

Drilling range - wet w/ stand - min.

8 mm

Drilling range - wet hand held - max.

35 mm

Drilling range - wet hand held - min.

8 mm

Drilling range hand-held wet: 8-35 mm, Rig-based wet: 8-35 mm

Weight of complete system 8 kg

Chuck type DD-C

A-weighted emission sound power level1)

95 dB (A)

1) according to EN 60745

Applications■ Drilling accurate anchor and through holes, 8 to 35 mm diameter■ Anchor setting with reduced noise level (renovation work in

hospitals, commercial and residential buildings)■ Anchor setting with impact-free drilling (marble, natural stone,

masonry, tiles)

Advantages■ Efficient: Drills through reinforcing bars■ Versatile: Drills through various types of steel reinforced con-

crete, marble, etc.■ Automatic: Electronic water management – the pump and

extraction functions are activated / deactivated automatically by the drilling machine control switch

■ Built-in drilling slurry extraction system means virtually no dust or dirty water

■ Productive: TopSpin provides faster drilling with minimum effort

197


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DD 120 110V 1x Diamond coring tool DD 120 110V CEE 16A, 1x Allen wrench 4 / 6 kit, 1x Combination wrench 17 x 19, 1x Chuck BI+ assy, 1x Case

1 pc 368447

DD 120 230V 1x Diamond coring tool DD 120 230V, 1x Allen wrench 4 / 6 kit, 1x Combination wrench 17 x 19, 1x Chuck BI+ assy, 1x Case

1 pc 274933

DD 120 230V 1x Diamond coring tool DD 120 230V, 1x Chuck BI+ assy 1 pc 274927

Related products on pageInserts 195, 208-211

Diamond coring tool DD 120



650 rpm


162 mm


16 mm

Drilling range Rig-based wet: 16-162 mm


Chuck type BI+


102 dB (A)

A-weighted emission sound pressure level1)

89 dB (A)

Angular coring No1) according to EN 60745

Applications■ Installing pipes for sanitary, heating and air conditioning■ Installing water supply and waste water pipes■ Making openings for cable trays■ Setting large-diameter anchors and reinforcing bars■ Installing railings and barriers

Advantages■ Exceptionally user-friendly thanks to self-explanatory features

and controls■ Compact, lightweight unit for extremely easy handling■ Easy to transport and set up■ Two-speed gearing for optimum speed and torque■ More reliable and lower repair costs

198


www.hilti.com


Item number

DD 150-U 110V 1x Diamond coring tool DD 150-U 110V, 1x Chuck BI+ assy, 1x Case 1 pc 433333DD 150-U 220V 1x Diamond coring tool DD 150-U 220V, 1x Chuck BI+ assy, 1x Case 1 pc 2005134DD 150-U 230V 1x Diamond coring tool DD 150-U 220V, 1x Chuck BI+ assy, 1x Case 1 pc 433321DD 150-U 230V 1x Diamond coring tool DD 150-U 230V, 1x Chuck BI+ assy, 1x Case 1 pc 433323DD 150-U 230V 1x Diamond coring tool DD 150-U 230V, 1x Chuck BI+ assy, 1x Case 1 pc 433331


Diamond coring tool DD 150-U



780 rpm


162 mm


12 mm

Drilling range - wet hand held - max.

131 mm

Drilling range - wet hand held - min.

8 mm

Drilling range hand-held dry: 37-162 mm, hand-held wet: 8-131 mm, Rig-based wet: 12-162 mm

Drilling range - dry - max. 162 mm

Drilling range - dry - min. 37 mm


Applications■ Rig-based wet drilling in concrete for pipe penetrations, cable

trays and ducts and for the installation of railings and barriers■ Hand-guided wet drilling for setting large-diameter anchors and

reinforcing bars■ Hand-guided dry drilling in masonry for pipe penetrations in

plumbing, heating and air conditioning installations and for chimney and stove installation

Advantages■ Wet and dry drilling with one tool in different base materials

without need to change rig components■ High motor performance and sturdy three-speed gearing for

optimum drilling speed■ Exceptionally user-friendly features and controls■ 360° adjustable side handle with integrated dust and water

management functions■ Power control LED helps new users to achieve the optimum rate

of drilling progress and maximum core bit life■ High-grade drill stand with many useful features

199


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DD 160 110V 1x Diamond coring tool DD 160 110V, 1x Chuck BI+ assy 1 pc 2005225DD 160 220V 1x Diamond coring tool DD 160 220V, 1x Chuck BI+ assy 1 pc 2005230DD 160 230V 1x Diamond coring tool DD 160 230V, 1x Chuck BI+ assy 1 pc 2005223



Technical dataDrill stand Base plate dimensions and system

weight based on use of SFL standNumber of gears 3


420 rpm


202 mm


25 mm



Chuck type BI+


106 dB (A)


93 dB (A)


Applications■ Rig-based wet drilling in concrete for pipe penetrations in

plumbing, heating and air conditioning installations■ Stitch drilling for cable trays and ventillation ducts■ Drilling blind holes for large-diameter anchors, reinforcing bars

and the installation of railings and barriers

Advantages■ Exceptionally user-friendly thanks to self-explanatory features

and controls■ Sturdy three-speed gearing for outstanding coring performance

across the entire diameter range■ The power control LED helps new users to achieve the optimum

rate of drilling progress and maximum core bit life■ Choice of a high-grade drill stand with many useful features or

simple, very compact drill stand with basic functionality■ Clear and concise range of accessories for added versatility

200


www.hilti.com


Item number

DD 200 BL 110V 1x Diamond coring tool DD 200 110V GB assy, 1x Chuck DD-C-BL assy 1 pc 283491DD 200 230V 1x Diamond coring tool DD 200 230V GB assy, 1x Chuck DD-C-BL assy 1 pc 202591

Related products on pageInserts 195, 208, 211-213




400 mm


25 mm



Chuck type BL


105 dB (A)


92 dB (A)

Angular coring Yes

Base materials Concrete1) according to EN 60745

Applications■ Making penetrations for ducts, pipes and cables■ Openings for ventilation■ Stitch drilling for breaches■ Coring holes for service entries■ Core drilling in ceilings, walls and floors without hammering or

vibration

Advantages■ The power control LED helps new users to achieve the optimum

rate of drilling progress and maximum core bit life■ Easy to handle, easy to understand and easy to operate■ Powerful motor■ Air-cooled 2600 watt drive unit with three-speed gearing and

convenient controls■ BL core bit connection■ BL quick-release chuck system for keyless exchange of core

bits

201


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DD 350 BS 110V 1x Diamond coring tool DD 350 110V CEE 32A assy, 1.001x Hex skt hd cap screw M12X55, 1x Chuck BL-BS

1 pc 211535

DD 350 BL 230V 1x Diamond coring tool DD 350 230V assy, 1x Chuck DD-C-BL assy 1 pc 211539





667 rpm


298 rpm


500 mm


52 mm




108 dB (A)


95 dB (A)

Angular coring Yes1) according to EN 60745

Applications■ Through-holes and penetrations■ Blind holes for setting anchors or post-installed rebar■ Corner holes for sawing■ Manhole openings■ Stitch coring for installing cable trays■ Large openings for drain pipes etc.

Advantages■ Operation within the optimum power range is easy with the aid

of the LED power controls for peak performance and longer core bit life

■ High performance, low weight■ BL keyless quick-release chuck system for quick core bit

changing■ The service indicator warns when servicing is due, reducing

down time and helping to avoid costly repairs■ Thanks to IP 55 water spray protection, drilling can be carried

out under adverse conditions■ Drilling at an angle

202


www.hilti.com


Item number

DD 500 BL 400V 1x Diamond coring tool DD 500 400V assy, 1x Chuck DD-C-BL assy 1 pc 285908

Related products on pageInserts 195, 208, 213




531 rpm


265 rpm


600 mm


82 mm



Chuck type BL


115 dB (A)


100 dB (A)


Applications■ Coring through-holes and penetrations■ Drilling blind holes for setting anchors or rebar■ Corner holes for sawing■ Making manhole openings■ Stitch coring for installing cable trays■ Large openings for drainage water pipes etc.

Advantages■ Operation within the optimum power range, for peak perfor-

mance and longer core bit life, is easy with the aid of the LED power controls

■ High performance, low weight■ Keyless BL quick-lock chuck system for quick changing of core

bits■ The service indicator warns when servicing is due, reducing

down time and helping to avoid costly repairs■ With IP 55 water spray protection, drilling can be carried out

under adverse conditions■ Drilling at an angle

203


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Accessories for Diamond Drilling Tools

DD E

C-1

DD 1

20

DD 1

50-U

DD 1

60

DD 2

00

DD 3

50

DD 5

00

Ordering designation Sales pack quantity

Item number

Accessory kit DD M12 LAccessories for fastening drill stands using M12 anchors (large spindle and nut)

1 pc 409279

Accessory kit DD M16Accessories for fastening drill stands using M16 anchors

1 pc 409303

Adapter BI/BR/BS 1 pc 373419

Adapter BL/BS/BR 1 pc 305910

Chuck DD-C-BSBS chuck for DD 750

1 pc 232235

Chuck DD-CS-BS/BRBS/BR chuck for DD 200, DD 350 and DD 500

1 pc 305904

Double taper pin D-CO-ML 1 pc 232241

Drilling stand DD-CR1Drill stand for the DD EC-1

1 pc 376281

Drilling stand DD-HD 30Drill stand for the DD 200, DD 350 and DD 500

1 pc 305534

Drilling stand DD-ST 150-U CTLDrill stand with combined anchor and vacuum base plate and column for angular coring

1 pc 435666

Drilling stand DD-ST 160 CTLCombined anchor and vacuum baseplate for angular coring

1 pc 435663

Drilling stand DD-ST 160 SFLCompact, light anchor baseplate, not suitable for angular coring

1 pc 435664

Eccentric pin DD-EP-ML 1 pc 232244

End stop DS-ES-L 1 pc 371703

Filter REC 1 F 1 pc 377255

Goggles PP EY-HA R HC/AF clearLens: PC material, thickness 2.2 mm, Supravision HC-AF coating, filter 2-1.2, impact energy 120m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065591

Goggles PP EY-HA S clearLens: PC material, thickness 2.1 mm, Supravision Extreme coating, filter: 2-1.2, impact energy: 120m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065590

Guide rail D-R100L 1 pc 310336


204


www.hilti.com


DD E

C-1

DD 1

20

DD 1

50-U

DD 1

60

DD 2

00

DD 3

50

DD 5

00


Item number

Jack screw DD-CS M12S-SMM12 clamping spindle for large base plates (total length 195 mm)

1 pc 251830

Jack screw DD-CS M16M16 clamping spindle for large base plates (total length 250 mm)

1 pc 337378

Jack screw DD-LR-CLSM12 clamping spindle for compact base plates (total length 125 mm)

1 pc 333629

Jack screw DD-ST-150/160-JS 1 pc 2007686

Nut DD-LR-CLNCompact flexible clamping nut

1 pc 333477

Quick-locking nut DD-CN-SMLFlexible clamping nut for large base plates

1 pc 251834

Remote control DS RC-TS22 1 pc 310220

Safety glasses PP EY-CA NCH clearLens: PC material, thickness 2.1 mm, Optidur NCH coating, filter: 2C-1.2, impact energy: 45m/s

1 pc 2065449

Safety glasses PP EY-GU B AF blueLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065447

Safety glasses PP EY-GU C HC/AF clearLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065445

Safety glasses PP EY-GU G HC/AF greyLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065446

Sealing washer DD-SW-10/12-S 1 pc 207304

Sealing washer DD-SW-107/117-L 1 pc 207334

Sealing washer DD-SW-107/117-M 1 pc 207322





205


DD E

C-1

DD 1

20

DD 1

50-U

DD 1

60

DD 2

00

DD 3

50

DD 5

00


Item number

Sealing washer DD-SW-182-L 1 pc 207339








Sealing washer DD-SW-32-S 1 pc 207309

Sealing washer DD-SW-42-M 1 pc 207317






www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

206


www.hilti.com


DD E

C-1

DD 1

20

DD 1

50-U

DD 1

60

DD 2

00

DD 3

50

DD 5

00


Item number



Sharpening plateFor resharpening the diamond segments

1 pc 51343

Sharpening plate DC-SE SP2For resharpening the diamond segments

1 pc 314303

Spacer DD-HD30-SPIncreases the drillable diameter range of the DD-HD 30 drill stand by 150 mm

1 pc 305539

Vacuum baseplate DD-HD30-VBPVacuum pad for DD-HD 30 drill stand

1 pc 305538

Vacuum baseplate DD-HD30-VBPPVacuum pad for drilling holes in pipes using the DD-HD 30 drill stand

1 pc 305944

Vacuum baseplate DD-ST-VBP 120/160Vacuum pad for DD-ST 120 and DD-ST 160 drill stands

1 pc 2027859

Vacuum pump DD VP-U 110V 1 pc 408996



Water collector holder DD-HD30-WCHWater collector holder for the DD-HD 30 drill stand

1 pc 305536

Water dam DD-WC-MLWater dam for diameters up to 252 mm

1 pc 232243

Water dam DD-WC-SWater dam for diameters up to 87 mm

1 pc 232204

Water recycling unit DD REC-1 110V 1 pc 336745

Water recycling unit DD REC-1 240V 1 pc 336751

Water supply unit DWP 10Water supply unit for diamond drilling and diamond cutting tools

1 pc 365595

207

Diamond Drilling Consumables

www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Ordering designation Nominal diameter

Working length

Change module

Base materials Connection end Laser-welded segments

Segment height

Sales pack quantity

Item number

DD-C 8/70 T2 8 mm 70 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336885DD-C 10/150 T2 10 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336887DD-C 12/150 T2 12 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336889DD-C 14/150 T2 14 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336891DD-C 15/150 T2 15 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336895DD-C 16/150 T2 16 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336897DD-C 16/300 T2 16 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336898DD-C 18/150 T2 18 mm 150 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336899DD-C 18/300 T2 18 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336900DD-C 20/300 T2 20 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336906DD-C 24/300 T2 24 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336911DD-C 25/300 T2 25 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336912DD-C 28/300 T2 28 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336914DD-C 30/300 T2 30 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336916DD-C 35/300 T2 35 mm 300 mm No Concrete, soft to medium DD-C connection Yes 11 mm 1 pc 336920

Diamond core bit DD-C T2

Applications■ Drilling accurate 8-35 mm diameter anchor and through holes

Advantages■ Hilti quick-release connection lets you change core bits in sec-

onds - no tools required (keyless system)

Technical dataBase materials Concrete, soft to medium

Change module No

Connection end DD-C connection


Working length

Change module


Segment height Sales pack quantity

Item number

DD-C 14/150 T4 14 mm 150 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336855DD-C 15/150 T4 15 mm 150 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336859DD-C 16/150 T4 16 mm 150 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336861DD-C 16/300 T4 16 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336862DD-C 18/300 T4 18 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336864DD-C 18/600 T4 18 mm 600 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 301192DD-C 20/300 T4 20 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336870DD-C 20/600 T4 20 mm 600 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 301194DD-C 22/300 T4 22 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336873DD-C 24/300 T4 24 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336875DD-C 25/300 T4 25 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336876DD-C 25/600 T4 25 mm 600 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 301199DD-C 28/300 T4 28 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336878DD-C 30/300 T4 30 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336880DD-C 30/600 T4 30 mm 600 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 301203DD-C 32/300 T4 32 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336881DD-C 35/300 T4 35 mm 300 mm No Concrete, abrasive DD-C connection Yes 11 mm 1 pc 336884

Diamond core bit DD-C T4

Applications■ Drilling accurate 8-35 mm diameter anchor and through holes

Advantages■ Hilti quick-release connection lets you change core bits in sec-

onds - no tools required (keyless system)

Technical dataBase materials Concrete, abrasive

Change module No

Connection end DD-C connection

208


www.hilti.com

Ordering designation Connection end Sales pack quantity

Item number

BI-1 BI+ 1 pc 236120DD-BL BL 1 pc 305542BR-1 BR 1 pc 236121DD-BS BS – 1 ¼“ 12 pc 286794BU-1 BU 1 pc 236122


Connection end DD


Working length

Change module

Number of segments

Base materials Connection end

Laser-welded segments

Sales pack quantity

Item number

DD-BI 12/320 PL 12 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015350DD-BI 14/320 PL 14 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015352DD-BI 16/320 PL 16 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015354DD-BI 18/320 PL 18 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015355DD-BI 20/320 PL 20 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015357DD-BI 22/320 PL 22 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015359DD-BI 24/320 PL 24 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015360DD-BI 25/320 PL 25 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015361DD-BI 28/320 PL 28 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015363DD-BI 30/320 PL 30 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015365DD-BI 32/320 PL 32 mm 320 mm No 1 Concrete, abrasive BI+ Yes 1 pc 2015366


Diamond core bit DD BI PL 320

Applications■ Wet coring in reinforced concrete and natural stone using rig-

based drilling systems

Advantages■ Hilti BI+ quick-release connection lets you change core bits in

seconds - no tools required (keyless system)


Change module No

Connection end BI+

Ordering designation Nominal diameter Working length Change module

Number of segments


Sales pack quantity

Item number

DD-B 35/320+ PL 35 mm 320 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015368DD-B 37/320+ PL 37 mm 320 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015369DD-B 40/320+ PL 40 mm 320 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015370DD-B 42/320+ PL 42 mm 320 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015371DD-B 47/320+ PL 47 mm 320 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015372

Diamond core bit DD B PL 320

Advantages■ Hilti BI+ quick-release connection lets you change core bits in

seconds - no tools required (keyless system)


Change module Yes

Connection end M41

209

Ordering designation Nominal diameter Working length Change module Number of segments

Base materials Connec-tion end


Sales pack quantity

Item number

DD-B 52/320+ PL 52 mm 320 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015373DD-B 57/320+ PL 57 mm 320 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015374DD-B 62/320+ PL 62 mm 320 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 2015375DD-B 67/320+ PL 67 mm 320 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 2015376DD-B 72/320+ PL 72 mm 320 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 2015377DD-B 77/320+ PL 77 mm 320 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 2015378DD-B 82/320+ PL 82 mm 320 mm Yes 7 Concrete, abrasive M41 Yes 1 pc 2015379DD-B 92/320+ PL 92 mm 320 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 2015380DD-B 102/320+ PL 102 mm 320 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 2015381DD-B 107/320+ PL 107 mm 320 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 2015382DD-B 112/320+ PL 112 mm 320 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 2015383DD-B 122/320+ PL 122 mm 320 mm Yes 10 Concrete, abrasive M41 Yes 1 pc 2015384DD-B 132/320+ PL 132 mm 320 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 2015385DD-B 142/320+ PL 142 mm 320 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 2015386DD-B 152/320+ PL 152 mm 320 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 2015387DD-B 162/320+ PL 162 mm 320 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 2015388

Related products on pageInserts 195, 208, 210-211


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Working length

Change module

Number of segments



Sales pack quantity

Item number

DD-B 40/320+ PS 40 mm 320 mm Yes 3 Concrete, soft to medium M41 Yes 1 pc 2015442DD-B 42/320+ PS 42 mm 320 mm Yes 3 Concrete, soft to medium M41 Yes 1 pc 2015443DD-B 47/320+ PS 47 mm 320 mm Yes 4 Concrete, soft to medium M41 Yes 1 pc 2015444DD-B 52/320+ PS 52 mm 320 mm Yes 4 Concrete, soft to medium M41 Yes 1 pc 2015445DD-B 57/320+ PS 57 mm 320 mm Yes 4 Concrete, soft to medium M41 Yes 1 pc 2015446DD-B 62/320+ PS 62 mm 320 mm Yes 5 Concrete, soft to medium M41 Yes 1 pc 2015447DD-B 67/320+ PS 67 mm 320 mm Yes 5 Concrete, soft to medium M41 Yes 1 pc 2015448DD-B 72/320+ PS 72 mm 320 mm Yes 6 Concrete, soft to medium M41 Yes 1 pc 2015449DD-B 77/320+ PS 77 mm 320 mm Yes 6 Concrete, soft to medium M41 Yes 1 pc 2015450DD-B 82/320+ PS 82 mm 320 mm Yes 7 Concrete, soft to medium M41 Yes 1 pc 2015451DD-B 92/320+ PS 92 mm 320 mm Yes 8 Concrete, soft to medium M41 Yes 1 pc 2015452DD-B 102/320+ PS 102 mm 320 mm Yes 8 Concrete, soft to medium M41 Yes 1 pc 2015453DD-B 107/320+ PS 107 mm 320 mm Yes 8 Concrete, soft to medium M41 Yes 1 pc 2015454DD-B 112/320+ PS 112 mm 320 mm Yes 9 Concrete, soft to medium M41 Yes 1 pc 2015455DD-B 122/320+ PS 122 mm 320 mm Yes 9 Concrete, soft to medium M41 Yes 1 pc 2015456DD-B 132/320+ PS 132 mm 320 mm Yes 9 Concrete, soft to medium M41 Yes 1 pc 2015457DD-B 142/320+ PS 142 mm 320 mm Yes 10 Concrete, soft to medium M41 Yes 1 pc 2015458DD-B 152/320+ PS 152 mm 320 mm Yes 10 Concrete, soft to medium M41 Yes 1 pc 2015459DD-B 162/320+ PS 162 mm 320 mm Yes 10 Concrete, soft to medium M41 Yes 1 pc 2015460

Related products on pageInserts 208

Diamond core bit DD B PS 250 320


Change module Yes

Connection end M41

210


www.hilti.com

Ordering designation Nominal diameter Working length Change module

Number of segments


Laser-weld-ed segments

Sales pack quantity

Item number

DD-B 37/430+ PL 37 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015390DD-B 40/430+ PL 40 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015391DD-B 42/430+ PL 42 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 2015392DD-B 47/430+ PL 47 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015393DD-B 52/430+ PL 52 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015394DD-B 57/430+ PL 57 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 2015395DD-B 62/430+ PL 62 mm 430 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 2015396DD-B 67/430+ PL 67 mm 430 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 2015397DD-B 72/430+ PL 72 mm 430 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 2015398DD-B 77/430+ PL 77 mm 430 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 2015399DD-B 82/430+ PL 82 mm 430 mm Yes 7 Concrete, abrasive M41 Yes 1 pc 2015400DD-B 87/430+ PL 87 mm 430 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 2015401DD-B 92/430+ PL 92 mm 430 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 2015402DD-B 102/430+ PL 102 mm 430 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 2015403DD-B 112/430+ PL 112 mm 430 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 2015404DD-B 122/430+ PL 122 mm 430 mm Yes 10 Concrete, abrasive M41 Yes 1 pc 2015405DD-B 132/430+ PL 132 mm 430 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 2015406DD-B 142/430+ PL 142 mm 430 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 2015407DD-B 152/430+ PL 152 mm 430 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 2015408DD-B 162/430+ PL 162 mm 430 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 2015409DD-B 182/430+ PL 182 mm 430 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 2015410DD-B 202/430+ PL 202 mm 430 mm Yes 14 Concrete, abrasive M41 Yes 1 pc 2015411

Related products on pageInserts 208

Diamond core bit DD B PL 430


Change module Yes

Connection end M41

Ordering designation Nominal diameter Working length

Number of segments




Item number

DD-CM 35 PL 35 mm 60 mm 3 Concrete, abrasive n/a Yes 8 mm 1 pc 2015509DD-CM 37 PL 37 mm 60 mm 3 Concrete, abrasive n/a Yes 8 mm 1 pc 2015510DD-CM 40 PL 40 mm 60 mm 3 Concrete, abrasive n/a Yes 8 mm 1 pc 2015511DD-CM 42 PL 42 mm 60 mm 3 Concrete, abrasive n/a Yes 8 mm 1 pc 2015512DD-CM 47 PL 47 mm 60 mm 4 Concrete, abrasive n/a Yes 8 mm 1 pc 2015513DD-CM 52 PL 52 mm 60 mm 4 Concrete, abrasive n/a Yes 8 mm 1 pc 2015514DD-CM 57 PL 57 mm 60 mm 4 Concrete, abrasive n/a Yes 8 mm 1 pc 2015515DD-CM 62 PL 62 mm 60 mm 5 Concrete, abrasive n/a Yes 8 mm 1 pc 2015516DD-CM 67 PL 67 mm 60 mm 5 Concrete, abrasive n/a Yes 8 mm 1 pc 2015517DD-CM 72 PL 72 mm 60 mm 6 Concrete, abrasive n/a Yes 8 mm 1 pc 2015518DD-CM 77 PL 77 mm 60 mm 6 Concrete, abrasive n/a Yes 8 mm 1 pc 2015519DD-CM 82 PL 82 mm 60 mm 7 Concrete, abrasive n/a Yes 8 mm 1 pc 2015520DD-CM 87 PL 87 mm 60 mm 8 Concrete, abrasive n/a Yes 8 mm 1 pc 2015521DD-CM 92 PL 92 mm 60 mm 8 Concrete, abrasive n/a Yes 8 mm 1 pc 2015522

Change module DD CM PL

Applications■ Rig-based wet coring in reinforced concrete and natural stone

Advantages■ Laser-welded segments


Connection end n/a

Laser-welded segments Yes

211

Ordering designation Nominal diameter Working length

Number of segments

Base materials Laser-welded segments


Item number

DD-CM 102 PL 102 mm 60 mm 9 Concrete, abrasive Yes 8 mm 1 pc 2015523DD-CM 107 PL 107 mm 60 mm 9 Concrete, abrasive Yes 8 mm 1 pc 2015524DD-CM 112 PL 112 mm 60 mm 9 Concrete, abrasive Yes 8 mm 1 pc 2015525DD-CM 122 PL 122 mm 60 mm 10 Concrete, abrasive Yes 8 mm 1 pc 2015526DD-CM 132 PL 132 mm 60 mm 12 Concrete, abrasive Yes 8 mm 1 pc 2015527DD-CM 142 PL 142 mm 60 mm 12 Concrete, abrasive Yes 8 mm 1 pc 2015528DD-CM 152 PL 152 mm 60 mm 13 Concrete, abrasive Yes 8 mm 1 pc 2015529DD-CM 162 PL 162 mm 60 mm 13 Concrete, abrasive Yes 8 mm 1 pc 2015530



www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Working length

Number of segments



Item number

DD-CM 40 PS 40 mm 60 mm 3 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015536DD-CM 42 PS 42 mm 60 mm 3 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015537DD-CM 47 PS 47 mm 60 mm 4 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015538DD-CM 52 PS 52 mm 60 mm 4 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015539DD-CM 57 PS 57 mm 60 mm 4 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015540DD-CM 62 PS 62 mm 60 mm 5 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015541DD-CM 67 PS 67 mm 60 mm 5 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015542DD-CM 72 PS 72 mm 60 mm 6 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015543DD-CM 77 PS 77 mm 60 mm 6 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015544DD-CM 82 PS 82 mm 60 mm 7 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015545DD-CM 87 PS 87 mm 60 mm 8 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015546DD-CM 92 PS 92 mm 60 mm 8 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015547DD-CM 102 PS 102 mm 60 mm 8 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015548DD-CM 107 PS 107 mm 60 mm 8 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015549DD-CM 112 PS 112 mm 60 mm 9 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015550DD-CM 122 PS 122 mm 60 mm 9 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015551DD-CM 132 PS 132 mm 60 mm 9 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015552DD-CM 142 PS 142 mm 60 mm 10 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015553DD-CM 152 PS 152 mm 60 mm 10 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015554DD-CM 162 PS 162 mm 60 mm 10 Concrete, soft to medium n/a Yes 8 mm 1 pc 2015555

Change module DD CM PS

Applications■ Rig-based wet coring in reinforced concrete and natural stone



Connection end n/a



Working length

Change module

Number of segments


Sales pack quantity

Item number

DD-B 25/430 H4S 25 mm 430 mm No 1 Concrete, abrasive M41 Yes 1 pc 418498DD-B 28/430 H4S 28 mm 430 mm No 1 Concrete, abrasive M41 Yes 1 pc 418500DD-B 30/430 H4S 30 mm 430 mm No 1 Concrete, abrasive M41 Yes 1 pc 418502DD-B 32/430 H4S 32 mm 430 mm No 1 Concrete, abrasive M41 Yes 1 pc 418503

Diamond core bit DD-B H4S

Applications■ Coring in the 25-600 mm diameter range in reinforced concrete



Connection end M41


212


www.hilti.com


Working length Change module

Number of segments

Base materials Connec-tion end


Sales pack quantity

Item number

DD-B 35/430+ H4S 35 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 420933DD-B 37/430+ H4S 37 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 420934DD-B 40/430+ H4S 40 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 420935DD-B 42/430+ H4S 42 mm 430 mm Yes 3 Concrete, abrasive M41 Yes 1 pc 420936DD-B 47/430+ H4S 47 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 420937DD-B 52/430+ H4S 52 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 420938DD-B 57/430+ H4S 57 mm 430 mm Yes 4 Concrete, abrasive M41 Yes 1 pc 420939DD-B 62/430+ H4S 62 mm 430 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 420940DD-B 67/430+ H4S 67 mm 430 mm Yes 5 Concrete, abrasive M41 Yes 1 pc 420941DD-B 72/430+ H4S 72 mm 430 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 420943DD-B 77/430+ H4S 77 mm 430 mm Yes 6 Concrete, abrasive M41 Yes 1 pc 420945DD-B 82/430+ H4S 82 mm 430 mm Yes 7 Concrete, abrasive M41 Yes 1 pc 420947DD-B 87/430+ H4S 87 mm 430 mm Yes 7 Concrete, abrasive M41 Yes 1 pc 420948DD-B 92/430+ H4S 92 mm 430 mm Yes 7 Concrete, abrasive M41 Yes 1 pc 420950DD-B 102/430+ H4S 102 mm 430 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 420952DD-B 107/430+ H4S 107 mm 430 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 420954DD-B 112/430+ H4S 112 mm 430 mm Yes 8 Concrete, abrasive M41 Yes 1 pc 420956DD-B 122/430+ H4S 122 mm 430 mm Yes 9 Concrete, abrasive M41 Yes 1 pc 420957DD-B 132/430+ H4S 132 mm 430 mm Yes 11 Concrete, abrasive M41 Yes 1 pc 420958DD-B 142/430+ H4S 142 mm 430 mm Yes 11 Concrete, abrasive M41 Yes 1 pc 420960DD-B 152/430+ H4S 152 mm 430 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 420961DD-B 162/430+ H4S 162 mm 430 mm Yes 12 Concrete, abrasive M41 Yes 1 pc 420962DD-B 172/430+ H4S 172 mm 430 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 420963DD-B 182/430+ H4S 182 mm 430 mm Yes 13 Concrete, abrasive M41 Yes 1 pc 420964DD-B 202/430+ H4S 202 mm 430 mm Yes 14 Concrete, abrasive M41 Yes 1 pc 420965DD-B 225/430+ H4S 225 mm 430 mm Yes 17 Concrete, abrasive M41 Yes 1 pc 420966DD-B 250/430+ H4S 250 mm 430 mm Yes 17 Concrete, abrasive M41 Yes 1 pc 420967DD-B 300/450 H4S 300 mm 450 mm No 18 Concrete, abrasive M41 Yes 1 pc 418528DD-B 350/450 H4S 350 mm 450 mm No 20 Concrete, abrasive M41 Yes 1 pc 418529DD-B 400/450 H4S 400 mm 450 mm No 22 Concrete, abrasive M41 Yes 1 pc 418530DD-B 450/450 H4S 450 mm 450 mm No 24 Concrete, abrasive M41 Yes 1 pc 418531DD-B 500/450 H4S 500 mm 450 mm No 26 Concrete, abrasive M41 Yes 1 pc 418532

Related products on pageInserts 195, 208, 213

213


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Number of segments



Segment dimensions Segment height Sales pack quantity

Item number

DD-CM 35 H4S 35 mm 3 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420968DD-CM 37 H4S 37 mm 3 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420969DD-CM 40 H4S 40 mm 3 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420970DD-CM 42 H4S 42 mm 3 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420971DD-CM 47 H4S 47 mm 4 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420972DD-CM 52 H4S 52 mm 4 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420973DD-CM 57 H4S 57 mm 4 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420974DD-CM 62 H4S 62 mm 5 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420975DD-CM 67 H4S 67 mm 5 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420976DD-CM 72 H4S 72 mm 6 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420977DD-CM 77 H4S 77 mm 6 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420978DD-CM 82 H4S 82 mm 7 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420979DD-CM 87 H4S 87 mm 7 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420980DD-CM 92 H4S 92 mm 7 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420981DD-CM 102 H4S 102 mm 8 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420982DD-CM 107 H4S 107 mm 8 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420983DD-CM 112 H4S 112 mm 8 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420984DD-CM 122 H4S 122 mm 9 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420986DD-CM 132 H4S 132 mm 11 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420987DD-CM 142 H4S 142 mm 11 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420988DD-CM 152 H4S 152 mm 12 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420989DD-CM 162 H4S 162 mm 12 Concrete, abrasive n/a Yes 24 x 3.6 x 10 mm 10 mm 1 pc 420990DD-CM 172 H4S 172 mm 13 Concrete, abrasive n/a Yes 24 x 4.3 x 10 mm 10 mm 1 pc 420991DD-CM 182 H4S 182 mm 13 Concrete, abrasive n/a Yes 24 x 4.3 x 10 mm 10 mm 1 pc 420992DD-CM 202 H4S 202 mm 14 Concrete, abrasive n/a Yes 24 x 4.3 x 10 mm 10 mm 1 pc 420993DD-CM 225 H4S 225 mm 17 Concrete, abrasive n/a Yes 24 x 4.3 x 10 mm 10 mm 1 pc 420994DD-CM 250 H4S 250 mm 17 Concrete, abrasive n/a Yes 24 x 4.3 x 10 mm 10 mm 1 pc 420995

Change module DD-CM H4S

Applications■ Coring in the 35-250 mm diameter range in reinforced concrete



Connection end n/a


214

Diamond Sawing Machines

www.hilti.com


Item number

DST 10-E 3x400V EC 1x Sawing head DST 10-E assy, 1x Remote control DST-RC 10 1 pc 430574DST 10-E 3x400V PR 1x Sawing head DST 10-E assy, 4x Rail support DS-RF-L, 50x Flush anchor HKD-D M12x50, 1x Remote

control DST-RC 10, 1x Trolley assy, 1x Center section DS-BG 80, 1x Side section DS-BG 80, 1x Tool set DST-TS10

1 pc 430566

Wall saw DST 10-E

Technical dataA-weighted emission sound pressure level1)

96.9 dB (A)

Height remote control 125 mm

Height saw head 350 mm

IP protection class IP 65 (EN 60529)

Length remote control 390 mm

Length sawing head 365 mm

Max. cooling water pressure 6 bar

Max. fuse rating 16 a

Min. cooling water supply rate 2 l/min

Min. generator power 20 kVA1) according to EN 60745

Applications■ Cutting and extending openings in concrete for doors and

windows■ Sawing where space is limited and access is difficult

Advantages■ The wall saw for small to medium-sized jobs, cuts to a depth of

up to 38 cm / 15”■ Extremely compact saw system - no separate power supply box

required■ Maximum sawing performance with a 16 amp supply: provides

the ability to cut to a depth of 38 cm / 15”■ Quick to transport and set up thanks to the transport trolley and

built-in electronics■ Certified and listed by an independent testing agency

215


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DS TS20-E 1.6 3x400V 1x Sawing head DS TS20-E 1.6, 1x Hose 10M assy, 50x Flush anchor HKD-D M12x50, 1x Electro box DS EB-TS20-E assy, 1x Remote control DS RC-TS20, 1x Trolley Saege assy, 1x Power cable DS TS20-E 10m assy, 1x Tool set DS TS

1 pc 2064901

Wall saw DS TS20-E


100.3 dB (A)

Dimensions (LxWxH) - electric power unit

730 x 350 x 590 mm







Max. fuse rating 16 a, 25 a, 32 a

Min. cooling water supply rate 4 l/min1) according to EN 60745

Applications■ Cutting and extending openings for doors, windows and walls■ Controlled demolition in renovation■ Correcting facades, partition walls, etc.■ Flush cutting in all positions

Advantages■ Best-in-class cutting performance at depths of up to 53 cm

/ 21” thanks to efficient electric drive, traction control and smooth, stepless speed control

■ User-friendly remote control with clear, easily-read display and fault diagnosis system

■ Low system weight and robust trolley for convenient transport■ Certified and listed by an independent testing authority

216


www.hilti.com


Item number

DS TS32 LP 32 60Hz. 1x Sawing head TS32 54, 2x Hose DS-PH34-10, 1x Hose DD-FH4/14-10 set, 4x Rail support DS-RF-L, 1x Hydraulic power unit LP 32 60HZ, 1x Remote control D RC-LP32, 1x Center section DS-BG 80, 1x Side section DS-BG 80, 1x Tool set DS-LP32/TS32

1 pc 370725

DS TS32 LP32 3x400V 1x Sawing head TS32 54, 2x Hose DS-PH34-10, 1x Hose DD-FH4/14-10 set, 4x Rail support DS-RF-L, 1x Hydraulic power unit LP 32 400V, 1x Remote control D RC-LP32, 1x Side section DS-BG 80, 1x Center section DS-BG 80, 1x Tool set DS-LP32/TS32

1 pc 39122


Wall saw DS TS 32 / D-LP 32


90 dB (A)

Dimensions (LxWxH) - hydrau-lic power unit

790 x 540 x 1090 mm

Engine displacement 54 cm³

Height hydraulic power unit 1090 mm



IP protection class IP 44

Length hydraulic power unit 790 mm


Length sawing head 510 mm1) according to EN 60745

Applications■ Cutouts and breaches for doors, windows, ducts and shafts■ Controlled demolition and renovation■ Wall sawing, wire sawing and large-diameter hydraulic coring

Advantages■ Rugged and durable saw system based on well-proven

technology■ Certified and listed by independent testing authority■ Outstanding sawing performance with a 63 amp supply thanks

to automatic, electronically-controlled advance■ Becomes a universal system for heavy concrete cutting, coring

and demolition applications when used in conjunction with the DS-WSS30 wire saw kit and DD-750HY hydraulic coring rig

■ Traction Control (TC) calculates the optimum advance speed, making it possible to take full advantage of the available power

■ Underwater sawing applications

217


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DS TS32 54CM3 1x Sawing head TS32 54 1 pc 369315


Saw head DS TS 32

Technical dataDrive unit Hilti D-LP32 hydraulic power unit

Engine displacement 54 cm³




Max. operating pressure 200 bar


Min. storage temperature -15 °C

Oil flow rate - max 100 l/min

Oil flow rate - min 30 l/min

Applications■ Wall sawing with the D-LP 32■ Wire sawing with the DS WSS 30

Advantages■ Very robust and durable system■ Auto-pivoting blade guard holder■ Hydraulic motor integrated in sawing arm for better power

efficiency

218


www.hilti.com


Item number

LP 32 400V 50HZ 1 pc 369313


Hydraulic power unit D LP 32

Technical dataDimensions (LxWxH) - hydrau-lic power unit

790 x 540 x 1090 mm

Height hydraulic power unit 1090 mm


IP protection class IP 44

Length hydraulic power unit 790 mm



Max. fuse rating 32 a, 63 a



Applications■ Wall sawing with the DS TS 32■ Wire sawing with the DS WS10 or DS WSS 30■ Hydraulic drilling with the DD 750 HY

Advantages■ Steplessly adjustable oil flow■ Electric remote control■ Traction Control (TC) calculates the optimum advance speed,

making it possible to take full advantage of the available power■ For universal use in combination with wall sawing, wire sawing

and hydraulic drilling systems

219


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DS WS15 3x400V 1x Wire saw DS WS15 3x400V assy, 1x Tool set DS WS 1 pc 365429


Wire saw DS WS 15


79 dB (A)

Dimensions (LxWxH) - drive 1560 x 790 x 920 mm

Dimensions (LxWxH)- control unit

520 x 590 x 920 mm

Drive wheel diameter 280 mm

IP protection class IP 65 (EN 60529), IP 54 (IEC 529)




Min. flow rate of compressed air

100 l/min

Min. generator power 40 kVA1) according to EN 60745

Applications■ Structural alteration of buildings – cuts openings of all kinds and

almost any shape■ Sawing anything from heavily reinforced concrete to thick

stonework■ Technical demolition of structural components (bridges, chim-

neys, foundations)■ Sawing in noise-sensitive locations

Advantages■ Up to 22 kW peak power and 15 kW effective continuous power

rating with minimum water cooling – requires only a 32 A power supply

■ Smooth, infinite adjustment of the drive speed from the control console

■ Saw advance tension is easily adjustable at all times for maxi-mum cutting performance

■ Water flow on / off controllable from the control console■ High performance diamond wire in fixed working lengths■ Factory-fitted, quick-release couplings for greatly reduced

coupling failure

220


www.hilti.com


Item number

DS WS10 kit 1x Wire saw DS WS10 assy, 1x Assembly tool 1/2”, 1x Tool set DS WS 1 pc 376766


Wire saw DS WS 10


83.5 dB (A)

Dimensions (LxWxH) - drive 536 x 692 x 1221 mm

Dimensions (LxWxH)- control unit

563 x 265 x 497 mm

Drive unit D-LP15/D-LP32 hydraulic power unit


Guide wheel diameter 200 mm




Max. operating pressure 210 bar1) according to EN 60745

Applications■ Cutting openings and widening existing openings for doors and

windows in concrete and masonry■ Small openings for air conditioning ducts■ Cutting through reinforced concrete columns etc.

Advantages■ Handy and light■ The smallest, lightest Hilti wire saw■ Quickly set up, ready for use in no time (no part weighs more

than 22 kg)■ Powerful and convenient■ Smooth, gradual advance controlled by a compressed air

cylinder for top cutting performance and reduced risk of wire derailment

■ Low noise level

221


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing


Item number

DS WSS30 1x Wire saw DS WSS30 assy 1 pc 365430


Wire saw DS WSS30

Technical dataDrive unit DS-TS 32/D-LP 32 wall saw


Guide wheel diameter 200 mm




Min. storage temperature -15 °C

Nominal power 32 kW

Oil flow rate - min 80 l/min

Power source type Hydraulic

Applications■ Technical demolition of large structural components (bridges,

chimneys, foundations…)■ Structural alteration of buildings■ Sawing applications in surroundings sensitive to noise■ Underwater applications

Advantages■ Quick adaptation of the powerful Hilti D-LP32/DS-TS32 wall saw■ Very smooth and easy starting using the infinitely adjustable

electric remote control■ Integrated wire storage system■ The drive unit does not have to be aligned with the cutting line

222


www.hilti.com

Accessories for Diamond Sawing Machines

DST

10-E

DS T

S20-

E

DS T

S 32

/ D-

LP 3

2

DS T

S 32

D LP

32

DS W

S 15

DS W

S 10

DS W

SS30


Item number

Accessory kit DS-TS 1 pc 284805

Center section DS-BG 120 1 pc 238004

Center section DS-BG60/80 1 pc 284818

Center section DS-BG 80 1 pc 238002

Center section DS-BGF 80 1 pc 238006

Clamping piece DS-RF 1 pc 207137

Double taper pin D-CO-ML 1 pc 232241

Drive wheel DS-WSWD 280 1 pc 339315

Eccentric pin DD-EP-ML 1 pc 232244

End stop DS-ES-L 1 pc 371703

Flush cutting flange DS-FCA-110 1 pc 258436

Flush cutting flange DS-FCA-110FF 1 pc 307188

Goggles PP EY-HA R HC/AF clearLens: PC material, thickness 2.2 mm, Supravision HC-AF coating, filter 2-1.2, impact energy 120m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065591

Goggles PP EY-HA S clearLens: PC material, thickness 2.1 mm, Supravision Extreme coating, filter: 2-1.2, impact energy: 120m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065590



223


DST

10-E

DS T

S20-

E

DS T

S 32

/ D-

LP 3

2

DS T

S 32

D LP

32

DS W

S 15

DS W

S 10

DS W

SS30


Item number

Guide rail DS-R100-L 1 pc 284808



Guide wheel DS-WSW 200 1 pc 314374

Hose DD-FH4/14-10 set 1 pc 221129

Hose D-PH-58-1,6 1 pc 226393

Hose D-PH58-10 1 pc 221130

Hose DS-PH34-10 1 pc 221128

Plunging wheel DSW-PW 2 pc 365428

Plunging wheel DSW-PW rotatable 1 pc 247620

Pressure reducing valve FH 1/4 1 pc 258005

Pressure reducing valve PH 3/4 1 pc 258007

Protective cover DSW-WG 1 pc 365426

Rail support DS-RF-L 1 pc 284814

Rail support DS-RFP-L 1 pc 284816

Release pulley DS-WSRW 1 pc 315834

Remote control D RC-LP32 1 pc 369312


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

224


www.hilti.com


DST

10-E

DS T

S20-

E

DS T

S 32

/ D-

LP 3

2

DS T

S 32

D LP

32

DS W

S 15

DS W

S 10

DS W

SS30


Item number

Remote control DS RC-TS22 1 pc 310220

Safety glasses PP EY-CA NCH clearLens: PC material, thickness 2.1 mm, Optidur NCH coating, filter: 2C-1.2, impact energy: 45m/s

1 pc 2065449

Safety glasses PP EY-GU B AF blueLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065447

Safety glasses PP EY-GU C HC/AF clearLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065445

Safety glasses PP EY-GU G HC/AF greyLens: PC material, thickness 2.1 mm, Supravision HC-AF coating, filter: 2C-1.2, impact energy: 45m/s, surface resistance to fine particles: K, antifog: N

1 pc 2065446

Saw blade guard DS-BG16 1 pc 333883

Side section DS-BG 120 1 pc 238005

Side section DS-BG 80 1 pc 238003

Side section DS-BGF 120 1 pc 238009

Side section DS-BGF 80 1 pc 238007

Y-piece water valve 1 pc 339380

225

Diamond Sawing Consumables

www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Ordering designation Blade diameter

Arbour Number of segments

Usable segment height

Base materials Hilti HI mount Hydrostress HY mount

Sales pack quantity

Item number

DS-BT 600/HI C-10E 600 mm 60 mm 34 8 mm Concrete, soft to hard Yes No 1 pc 433443DS-BT 650/HI C-10E 650 mm 60 mm 37 8 mm Concrete, soft to hard Yes No 1 pc 433444DS-BT 800/HI C-10E 800 mm 60 mm 46 8 mm Concrete, soft to hard Yes No 1 pc 433445DS-BT 900/HI C-10E 900 mm 60 mm 52 8 mm Concrete, soft to hard Yes No 1 pc 433446

Wall saw blade DS-BT HI C-10E

Applications■ Cutting reinforced concrete

Advantages■ Fast cutting and long blade life

Technical dataBase materials Concrete, soft to hard


Wet or dry operation Wet





Sales pack quantity

Item number

DS-BT 600/5/HI C-20E 600 mm 60 mm 34 8 mm Concrete, soft to hard Yes No 1 pc 273596DS-BT 650/5/HI C-20E 650 mm 60 mm 37 8 mm Concrete, soft to hard Yes No 1 pc 274808DS-BT 800/5/HI C-20E 800 mm 60 mm 46 8 mm Concrete, soft to hard Yes No 1 pc 273598DS-BT 900/HI C-20E 900 mm 60 mm 52 8 mm Concrete, soft to hard Yes No 1 pc 416757DS-BT 1000/HI C-20E 1000 mm 60 mm 55 8 mm Concrete, soft to hard Yes No 1 pc 356211DS-BT 1200/HI C-20E 1200 mm 60 mm 65 8 mm Concrete, soft to hard Yes No 1 pc 356212

Wall saw blade DS-BT HI/HY C-20E






Ordering designation Blade diameter Arbour Number of segments



Sales pack quantity

Item number

DS-BT 600/HI C-H 600 mm 60 mm 34 8 mm Concrete, soft to hard Yes No 1 pc 356213DS-BT 800/HI C-H 800 mm 60 mm 46 8 mm Concrete, soft to hard Yes No 1 pc 356214DS-BT 900/HI C-H 900 mm 60 mm 52 8 mm Concrete, soft to hard Yes No 1 pc 356215DS-BT 1000/HI C-H 1000 mm 60 mm 55 8 mm Concrete, soft to hard Yes No 1 pc 356216DS-BT 1200/HI C-H 1200 mm 60 mm 65 8 mm Concrete, soft to hard Yes No 1 pc 356217

Wall saw blade DS-BT HI/HY C-H






226


www.hilti.com

Ordering designation Blade diameter Arbour Number of segments



Sales pack quantity

Item number

DS-BT 600/HI CM-H 600 mm 60 mm 34 10 mm Concrete, medium Yes No 1 pc 273543DS-BT 1600/HI CM-H 1600 mm 60 mm 84 10 mm Concrete, medium Yes No 1 pc 273553

Wall saw blade DS-BT HI CM-H


Advantages■ Good balance between cutting speed and blade life

Technical dataBase materials Concrete, medium





Base materials Hilti HI mount Laser-welded segments

Segment dimensions

Sales pack quantity

Item number

DS-BT 800/HI CM-H/CP+ 800 mm 60 mm 40 Concrete, soft to medium

Yes Yes 40 x 4.8 x 10 mm 1 pc 2052711


Yes Yes 40 x 4.4 x 10 mm 1 pc 2052712


Yes Yes 40 x 4.4 x 10 mm 1 pc 2052713

Wall saw blade DS-BT CM-H/CP+

Applications■ Sawing reinforced concrete

Advantages■ Good balance between sawing speed and blade life




Ordering designation Number of beads per metre

Flexible connector pre-assembled

Base materials Colour Diameter Type Sales pack quantity

Item number

DS-W 10.2 STEEL 20p.c. 40 No Concrete, soft to hard Black 10.2 mm Electroplated 1 m 377830DS-W 10.2 STEEL20p.c. 100M 40 No Concrete, soft to hard Black 10.2 mm Electroplated 1 pc 371986

Diamond wire DS-W Steel 20%

Applications■ Cutting reinforced concrete with up to 20% steel content

Advantages■ Universal


Type Electroplated


Diamond wire DS-W Steel 100%

Applications■ For cutting 100% steel

Advantages■ Higher number of beads per meter

Technical dataBase materials Steel

Type Electroplated


227

Ordering designation Wire length Number of beads per metre


Base materials Colour Diameter Type Sales pack quantity

Item number

DS-W 10.8 STEEL100p.c. 100M 100000 mm 48 No Steel Black 10.8 mm Electroplated 1 pc 371991


www.hilti.com

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Ordering designation Bead diameter Number of beads per metre Flex-ible con-nector pre-as-sem-bled

Base materials Colour Type Wet or dry operation Sales pack quantity

Item number

DS-W 10.7 CH/F1 11 mm 40 No Concrete, medium Black Sintered Wet 1 m 2058742

Diamond wire DS-W 10.7

Applications■ Sawing reinforced concrete

Advantages■ Good balance beteen sawing speed and wire life

Technical dataBase materials Concrete, medium

Type Sintered


Ordering designation Bead diameter

Wire length Number of beads per metre


Base materials Colour Type Sales pack quantity

Item number

DS-W 10.2 100m dry 10 mm 100000 mm 40 No Concrete, soft to hard Black Electroplated 1 pc 425223

Diamond wire DS-W dry

Applications■ Dry cutting of reinforced concrete

Advantages■ Wire specifically designed for dry cutting


Type Electroplated

Wet or dry operation Dry

228


www.hilti.com

Accessories for Diamond Sawing Consumables

DS-W

Ste

el 1

00%

DS-W

Ste

el 2

0%

DS-W

dry

DS-W

10.

7


Item number

Assembly tool DS-WMT 1 pc 295161

Chuck jaw DS-WJ MK9 set 1 pc 340426

Connector DS-WC 10mm set 1 pc 371383

Crimping pliers DS-WSTHY 1 pc 235845

O-ring 10 pc 235844

Pin DS-WP 10 pc 235842

Sleeve DS-WS 10mm 1 pc 235841

229

Notes

Dia

mo

nd

Co

rin

g

an

d S

aw

ing

Diamond, Coring and Sawing - psc-mongolia.com Coring and...195 Diamond Coring and Sawing Diamond...

Documents

Transcript of Diamond, Coring and Sawing - psc-mongolia.com Coring and...195 Diamond Coring and Sawing Diamond...