DGDP - Civil · 2018. 10. 30. · 06. 06.0000.221 .Re-eval. 1 8 FOR OFFICIAL USE ONLY Directorate...

06. 06.0000.221 . Re-eval. 1 8

FOR OFFICIAL USE ONLYDirectorate General Defence PurchaseMinistry of DefenceNew Airport RoadTejgaon, Dhaka-1215Telephone : Mrlilary - 7 17 2

Civil - 9132225Fax: 9122748

lQ Karlik 1425

{! October 2018

RE-EVALUATION FOR TECHNICAL SPECIFIGATION OF BOMB DISPOSAL RESPONSE VEHIGLE

Reference:

A. Army Headquarters, Engineer in Chief's Branch, Engineer Directorate letter number 23.01.901.055.02. 192.03.23.1 0.'1 8 dated 23 October 2018.

It is to inform you that standardization of suitable models of Bomb Disposal Response Vehicle foradoption in Bangladesh Army is under process. Therefore, all interested Firms/Suppliers are requestedto forward necessary offer, brochures, catalogues, technical/ training/operational/ maintenance manualsand budgetary offers etcetera (each in duplicate) against each model directly to Army HeadquartersEngineer in Chief's Branch, Engineer Directorate by 03 November 2018 with an intimation to thisDirectorate General. Offered models should be compatible with specification attached with this letter.Lack of any information will disqualify the offer.

Enclosure.

1. 39 Pages Technical Specification.

Distribution:External:Action:

A S M SHAMSUR RAHMAN LASKARMajorFor Acting Director General

(All Concerned Firm/Supplier)

lnformation:

Army Headquarters, General Staff Branch (Weapon, Equipment and Statistics Directorate)

Army HeadquartersEngineer in Chief's Branch (Engineer Directorate)

Army HeadquartersMaster General of Ordnance Branch (Ordnance Directorate)

lnternal:

Action:

lT Section - (For flashing on DGDP web site).

Notice Board

FOR OFFICIAL USE ONLY

l

ll

I

I

RESTRICTED

ANNEXATO

DrryTECHNICAL SPECIFICATION OF BOMB DISPOSAL

[Bp] RESPONSE VEHICLE

A-1RESTRICTED

l

lr

I

I

I

Ser Description Required TechnicalSpecification

Mustbe filled upby thePrincipal/Manufacturer

Rmks

L Name of the Equipment Bomb Disposal ResPonse Vehicle') Name and Complete Address ofLocal

AsentTo be mentioned

3. Name and Complete Address ofManufacturer

To be mentioned

4. Name and Complete Address ofPrincipal

To be mentioned

5. Make & Model ofBD ResPonse Vehicle To be mentioned

6. Country of OriginGp A Countries

7. Country of AssemblY

o. Country of Manufacturerq Year of Production Not before the year of contract

10. VehieleiB-c-eifieaEpaa. Make & Model To be mentioned

b. Countryof0riginGp A Countriesc. Country of AssemblY

d. Country ofManufacturere. Drive RHD

f. Configuration 4x4

s. Wheel Base To be mentioned

h. Grade abilitY Minimum 300

i. Ground Clearance Minimum 300 mm

k. Ansle ofApproach fdegJ Minimum 250

l. Angle of DeParturq[qqg] Minimum 250

m. Turning Radius Maximum B m

n. Fording Depth To be mentioned

11 Dimension (LxWxH)

a. Length To be mentioned

h widrh To be mentioned

c. Height Maximum 3m

1a Travel Speed (High waY) To be mentioned

13. Weiohtsa. Kerb Weight (Kg) To be mentioned

b. Pay Load lTON

c. Gross Vehicle Weight (Kgl To be mentioned

1.4. Ensinea. Make & Model To be mentioned

b. Tvpe To be mentioned

c. Country of 0r'iglqGp A Countriesd. Country ofManufacturer

e. Country ofAssemblYf. Year ofProduction Not before the year of cPqtrac'!-g. Rated Horse Power with rPm Minimum 120 HP @ rPm to be

mentioned

h. Maximum Torque with rpm To be mentioned

Bore and Stroke To be mentionedNrrmher of Cvlinder Min 4 Cvlinder

l. Cooling System Liouid & air Cooled

To be mentioned

n. Fuel TYPe Diesel

r Fu6l Tank CaPacity To be mentioned

q. Fuel ConsumPtion To be mentioned

-+

rl

I

I

11

I

.l

tl

I

l

I

I

lT

!

Ser Description Required Technical SPecifi cation Must be filled upby the Principal/Manufacturer

Rmks

r, Engine Test Bench rePortand Certificate

Engine Test Bench RePort Which wasprepared by manufacture during production

engine at manufacturing factory must be

produced and submitted to the PSI team foreach model. other engines (mentioningengine number) of the same model must be

certified confirming the engine Test Bench

Report by the manufacture (duly signed and

stamDedl.

15. Elprtric Svstpm

a. Voltage l? / 24 Y olt [Universal tYPe)

b. Battery ryo!&Ah) Volt & Ah to be mentioned

c. Alternator fVolt & AmP] Volt & Amp to be mentioned

d. Starter (Volt & Kwl Volt & Kw to be mentioned

e. CircuitDiagram To be provided

f. All kind of maint softwareused in main eqpt and assessories

To be provided

76. Rrake Sv

a. Service Brake Hvd

b. Parking Brake Details to be mentioned

c. Emergency Brake To be mentioned

17. Transrnissi-ona. Type ofTransmission All wheel drive

b.' Countrvof0rigin U.S.A, Canada, UK Austria, Belgium,

Denmarh Finland, GermanY, France,

Hungary, ItalY, Ireland, Netherlands,Sweden, Spain, Norway, Switzerland, JapauAustralia, Turkev, South Korea.

-

c. Country ofManufactured. Country of AssemblY

18. Suspensiona. Front To be mentioned

b. Rear To be mentioned

1,9. Axlea. Front

To be mentionedb. Rear

c. Load Capacity

20. T!,rea. Size To be mentioned

b. Tyre Brand Bridgestone/Dunlop/Goodyear/Yokohama/Toyo

/Uniroyal/Continental/Michelin/Folda/Firestone/Armstrong/AMTEL/Pirelli/Hankook/ Kumho

c. Tyre Country of Origin andManufacturer

USA/Japan/EU Countries, Russia, Brazil,Indonesia, Malaysia, Philippines, Singapore,Thailand and South Korea

d. Tyre Pattern ND,GG & CC

e. Rim Size To be mentioned

f. No of Wre incl spare To be mentioned

zL. Lights and Gauges AII lights and Gauges including head light,Tail, Stop, Indicator, Work, Backup, Fog ligh!Blackout light and other standardaccessories to be provided

22. Walls and Roof of Vehicle a. Lined with insulation for sound proof and heatihsulation of t}le vehicle.b. Walls where practical/applicable lined with 5

bar aluminium to assist in protection against hardlinocks.c, Robust cleanable ceiling and wall covering.

23. Vehicle Floor a. Aluminium chequer plate flooring.b. Protection against hard knocks.

24. Air condition for driver's cabincommand station and rearaomnartment.

To be provided

a. Make & Model To be mentioned.

b. Country of 0rigin, Manufacturerand assembly.

GP A countries.

c. Capacity To be mentioned. All integral items to be

considered while planning

25. Fol accessories to be provide{ withthe veha. Selfrecoverywinch To be provided. Capacity to be mentioned'

b. weapon stowage clamP for2x7.62mm rifle in driver's cabin

To be provided

RESTRICTED

A-2RESTRICTED

l

lt

I

I

I

l

I

I

l

ll

I

!

I

I

I

l

RESTRICTED

b. Country of Origin,Assembly and Manufacturer

To be integrated with vehicle

g. Safety Feature The generator should have shutdown facility with sound warningagainst over voltage, over current,over load, Low/high oil pressureover temDerature e

Year of Production

Not less than 0.8

[B) Starting and Cooling

[10) Fuel Tank Capacity To be mentioned fShould becapable for 04 hours continuous

111 No ofCylinderTo be mentioned

(2) Country of Origin,Manufacturer and Assemb

GP A countries

(3) Year of Production Not before the year ofcontract(4) Rated Prime and Standby

(5J Rated output Voltage 220-230 V AC ( For Single phase)380-440 V AC (For three phase)(Specific Voltage to be

[1) Meter & Gauges Displaying Volt, Ampere,Frequency, Fuel in Tank, OilPressure, Running/OperatingHour, Water Temperature, KVA,KW, RPM, Power factor (pfJ etc,Must be easily visible by theoperator. All alarm and datalogging system should beavailable.A complete set of tool kits to beprovided with each Generator

a" A separate layout paper withnecessary diagram, location anddrawing of various stowage to beprovided with the offer.b. Door Arrangement to bementioned.

A-3RESTRICTED

;I

I

tl

l

I

I

l

I

I

lr

I

I

l

!

I

I

I

ll

l

I

Ser Description Required TechnicalSpecification

Mustbe filled upbythe

Principal/Manuf.

Rmks

L6, Racks, Shelves and Cupboards a. Arrangement should be madeat the rear to carry necessaryequipment and accessoriesb. Details dimension andarrangement to be provided.c. Arrangement should be madeso that all equipment can be

carried in secured position insidethe rear compartment.d. Cupboard stowage (Wood linedwhere necessaryJ: For carryingCartridges and Explosive (inseparate stowage solutionsJ andsecuriW stored on the vehicle.

20 Command,/ROV OperationStation

Arrangement should be madebetween the driver cabin and therear compartment with minimum4x seating arrangement and frontdesk facility for the Robot consoleoraPC

30. Power System Internal & external/shore linepower for charging and operatingonboard system.

31 Side Awning (Fitted to thevehicle sidel

Details to be mentioned

32. Trailer Hitch/Ramp for RobotfROVl movement

Hydraulic

JJ. Pintle hook for att bombsuooression container

To be provided

34. Emerqencv Liqhtino. Siren and PA Svstem

a. Emerqency !=!qh!!ng(1 ) Make and Model To be mentioned

(2) Country of 0rigin,Manufacturer and assembly

Group A Countries.

(3) watt To be mentioned

b. Siren1 ) Make and Model To be mentioned

(2)Country of 0rigin,Manufacturer and assemblv

Group A Countries.

(3) watt To be mentioned

c. PA Svstem,1 ) Make and Model To be mentioned

(2) Country of Origin,Manufacturer and assembly

Group A Countries.

(3) Capacity To be mentioned in watt(4) Number To be mentioned.

35. Telescoping Light Tower a, Minimum 2 meter hightelescopic fold down mast fiftedto vehicle roof with minimum 2x

500 watt or equivalent flood light.b. The mast can be raised orlowered remotely fromcommand/control comPartment.

a. Make and Model To be mentioned

b. Country of Origin,Manufacturer and assemblY

Group A Countries.

c. Type of flood light To be mentioned.

d. Illumination area To be mentioned.

e.0peration oflife offlood light To be mentioned.

f. Rotation of mast To be mentioned.

e. No ofsection ofthe mast To be mentioned.

36. Camera and onboard VideoSvstem

Roof mounted camera with latesttechnology to be provided

5t, Communication FacilitY Command and Control (Radio

Comm means to be Provided forComd, in addition, intercommunication between driver'scabin and rear compartment to beprovided,

RESTRICTED

A-4PEC'I'DI,.TTN )t.

l

I

1l

I

l

I

I

I

tr

l

Ser Description Required Technical Specifi cation Must be lltled up bytllePrln.lnrl /Mabt,f.tr,re' Rmks

JO. Following items to be provided withthe veh:

Origin, Manufacture & Assembly ofall items to be Gp A countries

39.

a. 1x Bomb Disposal Suit Tech spec is attAnox-1b. lxBomb SuppressionBlanket

Tech spec is att Appx-2

c. 1x Bomb Shield Tech spec is att ADDX-3

d. 1x DisruDtor Tech spec is att Appx-4e. 1x Electronic Stethoscope. Tech spec is att Appx-Sf. l-x Explosive Detector Tech spec is att Appx-6g. 1x Hook and Line Set Tech spec is att Appx'7h. 1x EOD De Armer Kit Tech spec is att ADDX-8

Lx EOD Rocket Wrench Tech snpc is att Annx-9k. 1x EOD Ultrasonic wallThickness meter

Tech spec is att Appx-1o

l. 1x EOD Bomb locator Tech spec is att Appx-11m. 1x Manipulating Stick/Telescopic ManiDulator


n. 1x Non Linear functionDetector

Tech spec is att Appx-L3

p. 1x Network]ammer (ManpackJ (Light weight Backpack IEDIrmmer'l


q. 1x Portable X- Ray SystemIComnlete'l.


r. 1x Under Door SgarchMirror-

{ Make & Model To be mentionedf Countrv of Origin

Gp A Countries{ Country of AssemblyA' Country of Manufacturer

s. lxUnderVehicleSearchMirror

Tech spec is attAppx 16

t. Freeze neutralizins kit Tech spec is att Appx 17u. Fuze Extractor Tech spec is att Appx 18

&OVlOuanLtv:01)a. Make and Model To be mentionedb. CountryofOriginand. Manufacturer

Gp A Countries

c. Countrv ofAssemblv40. Additional Item

a. EOD Tools Kit Box [25 items) a. To be provided.b, Origin, Manufacturer and Assemblyofall items to be Gp A Countries.

41.. Colour Duco Paint [Nitro Cellulose BasedMB Greenl.

42. 0perational Temperature _50 c to +500 c43. Maintenance Detaiis to be mentioned

44. IS0 Certificate or equivalent Certificate to be provided by themanufacturer

45. List of Standard Accessories for fullranee ofoperation/use

List to be provided

46 List of Standard Tools & Spares forfull range operation/use

List to be provided

47. List of optional item [if availableJ List to be provided

Note: Following information's/ document to be supplied along with the offer;

a. Details of working principle. Details to be mentionedb. Functionalfusers training incountry to be provided byforeien/Local expert

To be mentioned

c. Provision of supply of majorspares for minimum 10 years,

Certificate to be provided by tlemanufacturer

d. Provision of supply fast and slowmoving spares for minimum 10 years

Certificate to be provided by themanufacturer

e. Model validity in years (minimum10 years)

Certificate to be provided by themanufacturer

f. List of spares, Special Service Tools(SST)/Special Service Material (SSMJ

List to be provided by themanufacturer

g, Certificate for export and shipmentof equipme.nt from country ofmanrrfachrrer

No objection certificate to be providedby the manufacturer duringsubmission of offer

h. Any other relevant technicalinformation may also be enclosed

To be mentioned

RESTRICTED

A-5RESTRICTED {

I

I

I

1l

l

l

ll

I

I

I

I

Ser Description Required Technical SPecifi cation Must be filled upby the Principal/

Manufacturer

Rmks

48, TrainingLIser training (For Engineers) Abroad

(1J Duration: 04 Weeks

[2) NumberofTrainees:04 Nos (02xoffr+0 1xlC0+0 IxNCOJ

b. Home(1) Duration: 04 Weeks(2) NumberofTrainees:40 Nos [10xlCO+1-0xNCQ+2OxSnkJ

b. Operating, repair andmaintenance training (For EMEJ

To be provided during indent stage(Factory Level Training)No of Trainees 02 [01x Offrq:-Q141!9)

49. Part-3. Trainingrequiremenlb. 0peration, rePair and

maintenance training. .

to be provided (As per requirement ofElectrical and Mechanical Engineers

Directoratel.

50. PafU. RePairmaintenance requirement listspares:Book & Publications.a. Owners/operators manual inEnglish (book tYPe) includingcDlDVD.

b. Workshop/rePair manual inEnglish (book tYPeJ includingCD/DVD.

c. 10070 updated master spare partscatalogue in English (book tYPe)

including CD/DVD.

d. Complete and uPdatefl master

spare parts price catalogue/list inEnglish (book tYPe) includingCD/DVD.

and:of

To be provided [As per requirement ofElectrical and Mechanical Engineers

Directorate).

To be provided (As per requirement ofElectrical and Mechanical EngineersDirectorateJ.

To be provided (As per requirement ofElectrical and Mechanical EngineersDirectorateJ.

To be provided [As per requirement ofElectrical and Mechanical Engineers

DirectorateJ.

r1

51. Part-S. List of spares Fast and slow moving spare parts list to benrovided,

52. Part-6. Tools list for different levelof maintenance:

a. Analyzer, measuring &testing/fault finding anddiagnostic set

b. Special Service Tools (SST).

c. Special Service Materials(ssMl.

To be provided (As per requirement ofElectrical and Mechanical Engineers

Directorate).

To be provided (As per'requirement ofElectrical and Mechanical Engineers

Directorate).

To be provided (As per requirement ofElectrical and Mechanical Engineers

Directorate),

RESTRICTED

A-6"RESTRICTED

I

tl

l

I

!

l

l

I

tr

l

I

I

I

I

I

l

T

I

tl

I

I

I

RESTRICTED I.

ffiu*r* .', ,* ,u*.* rru, , r* *o.23.07.9 0L.055.02.192.03.23.10.78pr <vt? ocr 2078

TECHNICAL SPECIFICATION OF BOMB DISPOSAL SUIT HEAVV

IMTNIMUM V50 RATING OF 1600 FOR THE CHEST AND GROIN)

A 1 of 1RESTRICTED

Ser Description Reouired Technical Specifi cation Rmks

1. Name of the Equipment Bomb Disposal Suit Heavy [Minimum V50

Ratine of 1600 for the Chest and Groinl-2. Name and Complete Address of Local

AeentTo be mentioned

J. Name and Complete Address ofManufacturer

To be mentioned

4. Name and Complete Address of P{4cpql To be mentioned

5. Brand & Model To be mentioned

6. Countrv ofOriein USA, Canada, UK, Austria, Belgium, Denmark, Finland,

Germany, France, Hungry, Italy, Ireland, Netherlands,(ruarlon Nnnuarr (rrritzprlend Snein Irnan- Attstralia.7. Country of Assembly

B. Country ofManufacturer Turkey and South Korea

.,Year of Production Brand new and year of production not before

the year of contract.

10. D"r..ipti"". ks number (NSNJ to be mentioned for NATO countries. Should be

made irom fragmenthtion, blast ballistic resistant material and body armour. The suit willconsist of the following items:a. jacket with neck protector [with improved over pressure and fragmentation

orotectionl and Trouser fwith built in high absorbing back proteclqrEqnqEts:-f1l Ballistic Inserts Multilayer water -repellent Kevlar(2) Outer Cover Fire-retardant cotton

(31 Proprietary Armored steel plates with closed cell, linearfoam

(41 Weight With steel blast plates and without blast flatesto be mentioned

b. Air Coolins Svstemi Details to be mentioned.

Uelu€I-rsiIir-Bcuoyable.VisgL Wireless radio communication system/Hard were (duplex)

communication system (two way/three way) should include control module 125m self -tracking, friction controlled cable spool, recorder and Head seL Air blower can accommodate

NBC filter. Anti-blast neck guard to t}le bottom front of the Helmet closing any possible frontal

sap between helmet and collar. It should be a integral part of the suit housing, fol criteria:

(1) Moulded Glass Reinforced Polystyral [GRP) skin withelectrometric aramid core and inner Iining.

(2) Visor Anti-Ballistic hardened acrylic/polycarbonatelaminate.

i3l Suspension Harness Webbine and Ballistic NYlon

d. Coolins Suit(1) 3 Piece tube suit hood, shirtand trouser or combine

To be mentioned

(2) One set of rechargeablebattery with compatible charger foreach [No of Uattery in each set,

voltage and capacity of each batteryto be mentioned)

To be mentioned

(31 Onc sct of sPare rechargeablebattery for each (battery voltage and

capaciw to be mentionedJ

To be mentioned

(41 Battery charger (inPutpower, output voltage & current no

of batteries can'be charged at a timeetc to be mentioned)

To be mentioned

tsl DetailsofcoolingsYstem To be mentioned

e, Neck Protector Should be provided

f, Chest Protect or Should be provided

o Removable Groin Protector Shouid be provided

h. Intesral Radio Ear piece and Microphone th ambient sound facilities should be provldeo

j. Frotective Insert in the Thighs and

Lor,ver Lees

Should be provided

l. Carrvine baslTransit box Should be provided

K

l

I

rl

I

I

RESTRICTED

I

lr

I

I

ll

I

Ser Description Required Technical SPecifi cation Rmks

L Weieht

t1l Bomh DisPosal Suit HeavY

complete (with carry bag and

evcrthingJ

To be mentioned

(T Heln.ret with Visol To be mentioned

t3l Neck Protector To be mentioned

l'41 Cooling Suit To be mentioned

m. Ballistic Protector level ofVisor To be mentioned

n, Ballistic Protection level of Helmet To be mentioned

p. I'Jr"rurber ol Protection Layer To be mentioned

q. Color Olive Green

r, Lc vel ;; p"" trt"tt NATO standard (Details to be

meniioned for Helmet, Visor, Suit and plate, Arm,

Les, Front and other accesjories)

S. il cat ffi be constructed from

flame retardant materials which protect the used

asainst burn.

t.ha nrorzided

u. ii^ --_l uan heisht t5'-6" to 6',') to be r

,. Th. st"."t trr st be Brand New and free

from any defects/damages. Certificate should be

provided by the manufacturer along with the offer

and stores.b. The stores must be suitable for use in

tropical climate. Certificate should be provided by

the manufacturer along with the offer and stores'

c. The stores must be safe in storage,

transportation use etc and should not cause any

health hazard during storage or in use, Mnufacturer

should give a certificate to this effect along with the

offer and stores.d. Quality control and inspection certificate

by the manufacturer must be provided along with

the offer and stores.-

LL, Qualitl'ofStore

L2. Origin n I Cataloguc/llrochure/Manufhcturer's e'Manual

O.iC"r"t Catalogue/Brochure/Manufacturer's e:

*uiuul "ontuiting

General, Technical, Operational

and Maintenance data to be provided by the

manufacturer along with the offqr and stores.

13. Any other To be mentioned (Any other items/accessoriesnot mentioned above but require for full range

of operation, of the offered Bomb Disposal Suit

to be mentioned and must be supplied with the

Bomb Disposal SuitJ

X-eLe: - Following ittlolUq!pn'V sgggrngl; l)eteilco['r.\rtllrinsnrinciple.

ts to De supplleq atullH, wlI Details to be mentioned

b' Functional/rtsers training in

country to be provided by foreign/LocalexDel-1,

- Provision of suPPIY of major

--^-ac Fnr minimrrrn 1O vears

To be mentioned

C*ttft.rt" t. b. ptovided by the manufacturer

;-Pro,^sion of suPPlY fast and slow

movinq spares for minimum 10 Years

C.tift."t.t. b. p.ovided by the manufacturer

" Model va!!,llr',r irr ygnl5 [minimum

10 ye:ir'::) ,.

f Certificatr,' ii. r c;{port and shipment

of cquiPment ft'om cpuntry of

manulacturer

@ythemanufacturer

N" "b]*ti.,

*rtificate to be provided by the

manufacturer during submission of offer

Lirt t" b. p."ttd.d by the manufacturer

" l,ist of spares, SPecial Service

fools [SST]/Special Service Material

ISSMITo be mentionediln"v ott*r relevant technical

inforn-ra l:ion may . t';1 !ro e..nt|$gq--ak-

A7-2RESTRICTED

I

I

I

I

I

I

lti

I

I

'l'oe srounder straps and nomex Gloveld

RESTRICTED

A2-lDEC'I'PITTEI)

APPX-2 TO

ANX A TOAHq. E rN C',S BR IENGR DTE) LTR NO.

23.07.9 07.055.02.792.03.23.70.L8

I

lr

I

I

ll

I

I

I

I

11

I

I

TECHNICAL SPECIFICATION OF BOMB SUPPRESSION BLANKET

Ser Description Required Technical SPecifi cation Must be filled up bythe Principal/manufacturer

Rmks

1 Name of the Eouipment Bomb SuppressionBlanketa Name and ComPlete Address of

Local AeentTo be mentioned


To be mentioned

4. Name and ComPlete Address ofPrinciple

To be mentioned


6. Countrv of Origin (of each ite4q) USA, Canada, UK Austri4 Belgium, DenmarbFinland, Germany, France, Hungary, Italy,Ireland, Netherlands, Sweden, Norway,

Switzerland, Spain, Japan, Australi4 Turkey.

and South Korea

India

7. Country ofAssemblY India

o. Country of Manufacturer India

q Year of Production Brand new and year of production notbefore the year ofcontract

1"0. Overall Dimension I L x W x H ) To be mentioned14 Bomb Suppression Blanket NATO stocks number (NSNJ to be mentioned

for NATO countries The Ballistic systemcomprises the follow min absorption todetonation wire.

a. BallisticBlankett1) BallisticBlanket

02 Nos

(2) Size of Blanket 1.25 x 1.25m with carry handle

1.5 m X 1.5 m fDiff sizes Aval)

t3) Layer ofBallistic Blanket

f f ta5re" lminimum )layer to be mentioned

t4) Material Ballistic nylon, water resistant heavy duty [min)Velcro patches

Kevlar/Aramid Fabric[Multiple Layers)

tS) Look andhook of one blanket

To be mentioned

b. Ballistic Collart1) Size of Ballisticcollar

To be mentioned

(Z) Layers ofBallistic collar

To be mentioned

r3l Materials To be mentioned

(4) Warm-uPtime/calibration

T" be *enti"ted (f"r .egular and extended shut

down period)

(5) Loop andhook of one blanket

To be mentioned

c. TransitHoldallf1'l Size of Hold all To be mentioned

(2) Overall weight Gt"m priked in the Transit Hold all should not be more

than 15 kg ( approx)

-

d. Net Explosive it can

suDDress

To be mentioned

e. Protectionlevel V 50.17 srain steel fragment @ 500 m/s

f. Safety Circje 78 X 24 inch

t2. List of Standard Accessories/KitList

List to be submitted

13. List of Spares to Ue provided as per supplier/manufacturerrecomminded spare parts list with 100% updated

master spare parts catalogue in English (Book

type/soft copy) and complete and update master

rprr" pr.t price catalogue/list in English [bookwre/soft copvl

74. Tools List fondifferent level ofMaintenance

io b" prr"ided as per manufactures recommended

tool llst and detail maintenance schedule at

different level to be mentiPnqd.......-.-=.-15. Color

*

I'

'1

I

1l

I

l

RESTRICTED

I

l

I

l

I

I

l

lr

I

I

t,

Ser Description Required Technical Specification Must be filled up bY thePrincipal /manufacturer

Rmks

76. Quality of Store a. The stores mustbe Brand New

and free from any defects/damages'Certificate should be provided by the

manufacturer along with the offer and

stores,b. The stores must be suitable foruse in tropical climate' Certificate

should be Provided bY the

manufacturer along with the offer and

stores.c. The stores must be safe instorage, transportation etc and should

not cause anY health hazard duritnstorage or in use, Manufacturer should

give a certificate to this effect along

with the offer and stores.

d. QualitY control and insPection

certificate by the manufacturer must

be provided along with the offer and

stores

77 Original Catalogue/Brochure/ Manufacturer'se-manual

bffi"rl catalogue/Brochure/manufacturer's e-Manual containing

General, Technical, 0perational and

maintenance data to be Provided bY

the manufacturer along with the offerand stores

ql

18. Any Other To be mentioned (AnY other items/accessories not mentioned above but

require for full range of operation, of

the offered Bomb Suppression Blanket

to be mentioned and must be supplied

with the Bomb SuPPresslgl-Eb!\gq-

@ents to be supplied along with

" Details of working

Principal

Oet"ils to be mentioned

b. Frnctional/User'sTraining in country to be

provided by foreign/ localexpert.

To be mentioned

c. Provision ofsupply of major and

spares for minimum 10

vears,

C.rttncrt. t, b. P.*ided bY the

Manufacturer.

d- Provision ofsupplyof fastandslowmoving spares forminimum 10 Years.

Ce.tifrcat. to be Provided bY the

Manufacturer.

e. Model ValiditY inyears [minimum 10

vearsl

Certincate to Ue Provided bY the

Manufacturer.

f. Certificate forexport and shiPment ofequipment from countryof manufacturer

@aprovidedby the manufacturer duringsubmission of offer.

E List ofSPares,Special Service Tools

[SST) /SPecial Service

Material[SSM)

List to be Provided bY themanufacturer.

ta

t, AnY other relevanttechnical information maY

also be enclosed

To be provided.

A2-2RESTRICTED

rl

l

l

I

a,

tl

1,

I

RESTRICTEDAPPX.3 TOANXATOAHg E IN C'S BR IENGR DTEJ LTR NO,

23.0L.9 07.055.02.L92.03.23.10.L8DT: '? lla OCT 2018

TECHNICAL SPECIFICATION OF BOMB SHIELD

A-3-1RESTRICTED

Se

rDescription Required Technical Specifi cation Must be lilled up

by the Principal/manufacturer

Rmks

t. Name of the Equipment Bomb Shield

2. Name and CompleteAddress of Local Agent

To be mentioned

J. Name and CompleteAddress of Manufacturer

To be mentioned

4. Name and CompleteAddress of Principle

To be mentioned

5. Brand & Model To be mentioned6. Country ofOrigin USA, Canada, UK Austria, Belgium, Denmarh

Finland, Germany, France, Hungary, Italy, Ireland,

Netherlands, Sweden, Norway, Switzerland, Spain,

Ianan. Australia, Turkev and South Korea

7. Country of Assemblyo Country of Manufacturer

9. Year of Production Brand new and year of production not beforethe year ofcontract

10. 0verall Dimension (LxWxH' To be mentioned77. Protection level Specific NII Level/STANAG 4569- To be

mentioned12 Bomb Shield NATO product is guided than stocks on (NSNJ to be

mentioned. The shield should provide increasemobile protection against overpressure, deflect blastenergy, heat and fragmentation during E0D/IEDD orforced entry/riot control operations' Details to be

eiven includinq followings:

11

a. Shape It should be canted, rearward for enhanced slipstream dynamics to redirett blast forces overand around those being protected to Kevlarshrouds hug odd shaped surlacB-

b. Construction Materialf1l Shield Composite armour material/ Multiple layer

(2) Viewing Port Transparent, non-fragmenting, ballistic, acryliccomposite material and equals the ballisticperformance of the surrounding shield or equivalent

c. Size. To be mentionedd. Size of viewingDort

To be mentioned

e. Handle Chanseable left or rightf. Legs Pull out telescopic,/removable spring loaded

lees

13. Thickness [mmJ To be mentioned

74. Shield Curvature To be mentioned

15. Paddins To be mentioned

76. Weight To be mentioned

77. List of5% fast and slowmoving spares

To be submitted in the offer'

18. Color As per requirement I To be mentionedJ

79. Any Other To be mentioned (Any other items/accessories notmentioned above but require of full range ofoperation , of the offered Bomb Shield to be

mentioned and must be supplied with the Bomb

Shield)

20. Certificate t The offered items shall notbe hazardous forhuman head, body, skin or any other organ during

operation . In this regards certificate should be

piovided by the manufacturer alo-ng with offer and

store,b, Offered Manufacturer shall have IS0 oreouivalent certificate

11

tt

I

I

I

I

I

I

T

RESTRICTED

I

t

I

l

,l

I

I

1l

I

t,t,rst Uu RUea uP bY theRequilrd TechLiaal SPecifi cation

manufacturer must be provided along

with the offer and

Ti,I-itorut-iutt E st"t da. 'l ne stores luus

New and free from any defects

/damases .Certificate should be

proviala by the manufacturer along

with offer and stores.

b. The stores must be suitable

for use in tropical climate' Certificate

should be Provided bY the

manufacturer aiong with offer and

stores.c. The stores must be safe in

storage, transportation use etc and

shouli not cause any health hazards

during storage and in use'

Manuiacturer should give a

certificate to this effect along with

offer and stores.d. QualitY Control and

I tnspection Certificate !Y. .th"

Quality ofStore

@Brochure/Manufacturer's e- Manual containing

General ,Technical , Operational and

Maintenance data to be Provided bY

the manufacturer along with the

Original Catalogue

/Brochure/'l\4anufacturer's e-Manual

documents to bE Jtl with the offer:

i-o.trils of working

Training in country to be

provided bY foreign/local

Crilf*"t= t" b. P.""ided bY the

Manufacturer,;-- Proviston of suPPlY

of major and sPares for

minimum 10EEtif,*t. t" b. pr;tided bY thed. Provision ot suPPlY

of fast and slow moving

spares for minimum 10

Grtifrcate to be Provided bY theL tutoa"l validity in

N" "bp.tion

Certificate to be

provided by the-manufacturer duringexport and shiPment of

equipment from countrY of

f. Certificate for

List to Ue Provided bY the

" List of SPares 'Ioecial Service Tools (SST)

/Special Service

To be provided't-any other relevant

technical information maY

c-3-2RESTRICTED

I

I

I

l

I

Ser DescriPtion

27.

LL.

Note: FoEetrits to be tn"rrtloned

To be mentioned

1l

tl

l

I

l

I

!

I

ll

I

I

I

l

I

RESTRICTEDAPPX-4 TOANXATOAHQ. E IN C'S BR IENGR DTE) LTR NO,

23,0 L.9 0 1.0 5 5.07..79 2.03'23.70.18

Dr: r>? 9cr 2018

A-4-1RESTRICTED

Ser Description Required Technical SPecifi cation Must be filled uP bY thePrin cipal /manufacturer

lmks

1, Name of the Equipment Disruptor

2. Name and ComPlete Addressof Local Agent

To be mentioned

J. Name and ComPlete AddressofManufacturer

-

To be mentioned

4. Name and ComPlete Address

of PrincipleTo be mentioned


6. Countrv of Origin USa, Cinaa", UK Austria, Belgium,

Denmark, Finland, GermanY, France,

Hungary, ItalY, Ireland, Netherlands,

Sweden, Norway, Switzerland, Spain, )apanAilstralia. Turkev and South Korea'

7. Couniry ofAssemblYo Country ofManufacturer

9. Year ofProduction nrrna rrew ara year of production not before

the vear ofcontract

L0. Description/ PurPose ofEouioment

NATO stocks number (NSNJ to be

mentioned for NATo gSlltrigs.-a. Disruptor T" th-rCh *"te. |et.t , high sPeed

,Disrupter of smaller dia should be able to

frangible proiection . Other disrupter ofdifferent dia fifavail) how will functions to

be mentioned.

b. Caliber A set should include 12'5mm,20mm,29 mm or nearer calibersDisruDtor each

c. Type ofCartridge Item should include RC, Avon and

Steel Slugs fBlade, Flat and ChiselJ

d. Quantity Following quantity of cartridge/steelslug to be required for each set of De-

armor/ DisruPtol --........-....-f tl f2lS mm nq Cartdage o

?oO rdsPpoular- Ofv 20 rds

@ords(Avonrdsneeds carts 18 grarn to firel

[2] 20 mm RC Cartridge or . : :

f al 20 mm Cartridge 85 grain -Qrv 500 rds----- fb) ,0 -,4 Steet Slugs Regular-QV 80rds

fhicaMaed -Otv 40 rd

-Ofrr 40 rds

@grain -Qtyloordsfarrnn rric .nn<ists nf 70 srain carts)

ta

i3i 29 mm,CarEidse olllqulvalgtru ,

taJ

(.1 29 mm Avon Rounds- 105 grain -Qty z0 rds tAvon

e. The carts must be suitable tor use ln fioplcal cllmaLe'

iertificate should be provided to this effect by the manufacturer along

f, The year of manufacturer of the cartrloge snouro oe cutrcuL

year. Certificate should be provided to this effect by the manufacturer

g. fna cartridge should be sate in storage' transporf,alrolr cLL

ind should not cause iny health hazard' Certificate should be provided

lo this effect bY

[. Th. gra*ntee certificate for supply of cartridge as per olle*--,,r^^*:,16r .lano rrirh the offer and the store.

i Warranff and shelf lit'e certiucate Dy manurauLursr dJ

i"rrion.a t.f-o* should be furnished along with the offer and

cartridse.'

l,

I

lt

I

I

'I

12.5 mm RC Cartridge 18 grain -

(el 20 mm

29 mm Lartrlr20rds

I

lr

I

I

I

l

I

ll

I

I

l

Must be filled up by the

The ammo supplied are brand new,complete of good material andworkmanship throughout and that inthe event of any shortage,defects/damages.Being found after insPection thecartridge should be replaced by thesupplier at their own cost within 06

[six) months as the case arises.Thewarranty period of the stores will be

12 (EvelveJmonths from the date ofissue of "lns Note" by Inspectorate of

(1) WarrantyCertificate

The Shelf Life Certificate of thecartridge will be 15 (fifteenJ Yearsfrom the date of manufacturer if thecartridge are found defective the ShelfLife cartridge should be replaced bythe supplier at their own cost (CFR

basis ) within 06 (sixJ months as the

tZ) ShelfLifeCertificate

k Packing material to be such that it will not be affected by

damp, insects or any other harmful material during storage unto the

shelf life. Certificate should be provided by the manufacturer along

with the offer and the storel. The slugs/cartridge are to be securlty pacKeo wltn a sea

worthy and clearly marked for safe transit by air/sae/road/rail. The

packing and marking will be done by the supplier in such a manner

that the slugs /cartridge will not be affected by sea water, raid water,

The slugs/cartridge are to be security packed with a sea

be painted in mildm. Boxes ofcartridge should be painted in mild bronze green'

All marking and other details should be in

Quality control and inspection certificate by the manufacturer

must be provided along with theThe Inspectorate will issue final inspection report within one

monthl . Part Inspection Note will not be issued'

r. ihe lnspectorate wlll lssue rlnal lnspecLron Itsl

month after receipt of cartridge of consignee's end provided the visual

inspection is satisfactory and the case of clarification /replacement of

cartridge if any is settled as per visual inspection report and post

shipment test firing formalities are completed within the time ( one

Final inspection certificate from themanufacturer should be Providedalong with the ammunition bY the

C*"r*rbt. it.-t including power cartridge advance fluid

firing U"itr Firing units/Strike to be included to fire disrupter

a distance ofmax 300-400mAs a minimum should consist breachplug and capture gate assemblY

y. Mounting Block

Light weight Tubular multi positionstand for each caliber disrupted to be

It st rld be ."- prtible to most of the Remotely operated

Abe to make both standard and

Stand-off distance for variousof shots and ra

Tools list for different level ofmaintenance

RESTRICTED

A-4-2RESTRICTED

l

I

I

I

I

I

Ser Description Required Technical Specifi cation Rmks

s. Inspection Certilicate

v, Breech/Barrelassembly

w. Compensator To he mentioned

x. Barrel short & long Minimum 40 mmTo be mentioned

T aser sioht asscmhlv Minimum 40 mm adopter

aa. Stand/TriPod

LL. Shots

L2. To be mentioned

13 Weisht To be mentioned

14 Dimension To he mentioned tl

15 To be mentioned

IN Color

elA'

I

lr

I

I

It

I

l

I

Ser Description Required Technical Specifi cation Must be lilled up by thePrincinal /r{tanufacturer

Rmks

t7. Quality ofStore The stores must be Brand New andfree from any defects /damages.Certificate should be provided by themanufacturer along with offer and

stores,The stores must be suitable for use intropical climate. Certificate should beprovided by the manufacturer alongwith offer and stores.The stores must be safe in storage,transportation use etc and should notcause any health hazards duringstorage and in use. Manufacturershould give a certificate to this effectalong with offer and stores.

Quality Control and InspectionCertificate by the manufacturer mustbe provided along with the offer andstores.Proper requirement of stores how thestores should be as Per temp,moisture and weather concern mustbe clarified by the manufacturer.

LB. 0riginalCatalogue/Brochure/Manufacturer's e-Manual

Original Catalogue /Brochure/Manufacturer's e- Manual containingGeneral ,Technical , Operationhl andMaintenance data to be provided bY

the manufacturer along with the offerand stores.

la

10 Any 0ther To be mentioned (AnY otheritems/accessories not mentionedabove but require of full range ofoperation, of the offered disruptor tobe mentioned and must be suPPliedwith the Disruptorl.

I'loie: Followins information/documents to be supplied along with lirg o:ifer:

a. Details of working PrinciPal Details to be mentioned

b. Functional / User'sTraining in country to beprovided by foreign/ localexnert

For first few years, numbers of Offrs,

JCO's and NCO's must be trained bY

the manufacturer either home orabroad.

c. Provision of supplymajor and sparesminimum 10 years.

offor

Certificate to be provided bY theManufacturer.

d. Provision ofsupply of slowand moving spares forminimum 10 years.


e. Model Validity in years

[minimum 10 years)Certificate to be provided bY theManufacturer.

f. Certificate for export andshiDment of equipment from

No objection Certificate to be providedbv the

g. List ofsPares, SPecial

Service Tools (SST)/SPecialService Material [SSM]

List to be Provided bY themanufacturer

h. Any other relevanttechnical information , mayalso be enclosed

To be mentioned

l

RESTRICTED

A-4-3RESTRICTED

I

!

l

lt

!

I

I

!

RESTRICTED

l

ll

l

I

I

tl

I

TECHNICAL SPECIFICATION OF ELECTRONIC STETHOSCOPE

A-5-1RESTRICTED

APPX-s TOANXATOAHq E IN C'S BR IENGR DTEJ LTR NO,

23.01.9 07.055.02.792.03.23.70.78

ll

I

l


1. Name of the Equipment Electronic StethoscoPe

2. Name and Complete Address ofLocal Agent

To be mentioned


To be mentioned


To be mentioned

5. Brand and Model To be mentioned

6. Country of Origin USA, Canada, UK, Austria, Belgium, Denmark, Finland,

Germany, France, Hungary, Italy, Ireland, Netherlands,

Sweden, Norway, Switzerland, Spain, Japan, Australia,

Turkey & South Korea

7. Country of AssemblyB. Country of Manufacturer

9. Year ofProduction Brand new and year of production not before the calendaryear of contract.

10. Description/Purpose ofEquipment

NATO product is coated then stock Number [NSN) to be

mentioned,. Mrdrtr. n".t-nic Stethoscope shoutd be designed for both EOD and IEDD applications

ofamplifyingvibrationswhicharethebasisofsoundwaves, emanating from Mechanical, Electro Mechanical and certain Electronic fuses and timing

devicesatureaMicrowaveDopplercontactlessMicrophone

which can be positioned with a useful stand off from the device being monitored' The non

contact sensor, should operates on a microwave Doppler shift principle

d. The Contact tes5 Vficropi,one stould read the signature of a range of mechanical and

electronic timerse. Wolki ne-eg-ullrli-sns

[1] 0peration -04sC to 55eC, storage -1SsC to 60sC

l'21 Humiditv Up to 95% RH at 2BqC fnon condensingJ

[1] Operating altitude Up to 6,000 m

f.Dimensions(LxWxH) To be mentionedo

case

Weight including Carrying 6kg to 9.5 kg (approx.J

h. Power supply 12V rechargeable maintenance free lead-acid battery, 01 x

spare battery to be included in delivery or integral 12V

recharseable NiCd batterv "i. operating time Minimum 6 to 10 hours with microwave sensor. Minimum 14 to

20 hours with Piezo or pin point sensor/contac! le4qql

-

ffientsandaccessoriesorequivalentshouldbeincluded:7 Built in battery comPartment

(21 Adiusters for gain and filterIJac d oekpl

(a) Snrkpt fn

t'51 Recharseable NiCd battery/PP3 Stylq(A\ Plr eh

(7) spegtqllrqqls!rBl Contact probe fimpact soundJrq'l (' al rnnnpctinn cah'le

t10') Cap for contact needlefl1l Contactneedle

lD Contactlesshighfrequencyprobet13l Coaxial connection cable

rh fnr HF nroheth fnem li

Onoreiinn r:Ility to detect oscillating mechanism

such as clock/watch movement and electronics timers x

!l

I

I

I

It

I

I

I

1l

I

l

I

Ser Description Reouired Technical Specification Rmks

11. List of Standard Accessories forfull ranse of operation/use


1.2. List of Optional Accessories fifanvl


13. Color' To be mentioned

14. Any 0ther To be mentioned [Any other items/accessories not

mentioned above but require for full range of operation, ofthe offered Electronic Stethoscope to be mentioned and

must be supplied with the Electronic StethoscopelNote: Following information's/documents to be supplied alongwith the offer:a, Details of working principle. Details to be mentioned

b. Functional/users training incountry to be provided bY foreign/Local expert.

To be mentioned

c. Provision of supply of majorspares for minimum L0 years.

Certificate to be provided by the manufacturer

d. Provision of supply fast and slowmoving spares for minimum 10

vears.


e. Model validity in years (minimum10 yearsJ.


f. Certificate for export andshipment of equipment fromcountry of manufacturer

No objection certificate to be provided by the manufacturer duringsubmission of offer

g. List of spares, Special Service

Tools (SST)/Special Service MaterialfssMl

List to be provided by the manufacturer

h. Any other relevant technicalinformation mav also be enclosed.

To be mentioned

RESTRICTED

A-5-2RESTRICTED

k

1l

I

I

l

I

I

I

I

tr

l

I

l

I

tl

I

l

RESTRICTEDAPPX-6 TO

ANXATOAHq E IN C',S BR IENGR DTE) LTR NO.

23.01.901.055.02.192.03.23.10.18DT U)2 oCT 2018

TECHNICAL SPECIFICATION OF EXPLOSIVE DETECTOR

A.6-LRESTRICTED

Ser Description Required Technical SPecifi cation Must be filled up by the Rmks

1. Name of the Equipment Exolosive Detector

2. Name and Complete Addressof Local Agent

To be mentioned

J. Name and Complete Addressof Manufacturer

To be mentioned

4. Name and Complete Addressof Principle

To be mentioned

5. Brand & Model ION SCAN sOODT

6. Countrv of Origin USA, Canada, UK Austria, Belgium, Denmark, Finland,Germany, France, Hungary, Italy, lreland, etc'7 Country of Assembly

Country of Manufacturer9. Year of Production Brand new and year of production not before the

vear of contract

10. Overall Dimension ( LxWxHJ 40x31x40cm

7r. Explosive nelcetola. Vaporand NonVapor Substances

Detector should be able to detect both vaporand non vaDor substances

b. NATO Specification NATO stocks number(NSNI to be mentioned

c. Scope ofDetection Should be able to detect both commercial andall types of Military explosives in all weathercondition.

d. SamplingMethodology/ Method ofFunction

Dual tube Ion mobility spectrometry withradioactive ionization

(1) ForVaportvpe


(2) ForNonVapor type (TraceDetection onlvl


False Alarm Rate Less than 0.1%

f. Warm up time/Calibration

Less than 30 min ffor regular and extended shut

down periodJ

g. Time of Continuous0peration

Minimum 2 hours

h. Detector Sensitivity(1) FoeVaportvDe


{2) ForNonVaDor rype


1.2. Protection CapacitvDetection of Explosive Gunpowder, Cordite JNT, CE

TNT, PEK RDK PETN, SemtetPE, Dynamite, C4, NG,

Ammonium, Nitrate H-6, HBX,

Minol-z, Amatol, Prima cord,Tetritol, , 0ctols, Explosive,

HMK, PEX, Sheet Explosive,

Gelatin, TATP, LTPE and otherswill prograrrrriable Detectioncapability or equivalent'

Detection/identification capability to be

mentioned . EDGN, HMTD, HMX, NG, PETN, RDX,

TATP, TETRYL, TNT

73. Detection TechnologY Base on latest technology in explosive detection.

To be mentioned in details'

t4. Control Power switch, audio control and vapournarticular selector etc to be mentioned

1( LCD lndicator LCD for starus massage to be provided.

L6. Power Supply DC rechargeable battery ,power operating time

and rechargeable time to be mentioned 100-

24OV AC,50-60 HZ (for different type of power

supply, details to be mentioned), low batteryalarm to be vi.ible and audibl".

1.7. Battery and Charger 01 set ie.ha.g"able battery with battery charger

(Z2O YAC,50 Hz) and 01 set spare battery to be

orovided,

k

l

I

I

I

ll

I

I

I

rt

l-

h. rttecitnir:41bc errL lo:,

I :rli'r' relevan!), rr r ',r may alSO

RESTRICTED

A-6-2RESTRICTED

tl

d. l):,,,.,is-ion of supplyfast antl li rlr(,\ririil spares formininrurt ,l s,

., irrl Validity in years

[rlinitttLtr r''c:rfs)

f. {, iii(:ilLe for exportand shipri "Dt of equipment

cor.ilrlr" ormat,.... of Spares,

Service 'i',.ols [SST)/SPecialService Matcrial(S

-{

Must be filled up by the

0peration and Storage

From OoC to +50oC (minimum)

From -5'C to +55"C (minimum)

LCD, Connection for optionalexternal monitor and key board 26.4cm

Data Dispill,

a. Hand Held Unit 3.5 ke fmaximumJ withb. Conrpiete

List of SLa rrclard Accessoriesfor full ra nge of

Verific pen, sampling swab, sampler frameassembly, sampler assemblY

List to.be submittedList of 0pcrationalAccessori's [ifan

To be provided as per supplier/manufacturerrecommended spare parts list with 100%updated master spare parts catalogue inEnglish (Block type/ soft copyJ and completednd updated master parts price catalogue/list

recommended tools and details maintenancescliedule at different level to be mentioned.

Tools Lisr :;idifferenttype ofMaintcnl r: ce

Note: Followin;1 irri'ornration/documents to be with t he offer:

l. :.aiis of working

b. lrrirrctional/User'sTraining :. country to beprovided lry Foreign/ Local

Analysis time B sec, Built in Thermalprinter [Any other items/accessories notmentioned above but require of full range ofoperation , of the offered Explosive Detector tobe mentioned and must be supplied with the


Certificate to be provided bY themajor and spares for minilnum

Ccrtificate to be provided bY theManufacturer.

Certificate to be provided bY tJre

Marrufacturer,

List to be provided by the manufacturer.Bu ilt in Thermal printer

l

t,

I

tr

l

I

1l

I

l

I

RESTRICTEDAPPX-7 TO

ANXA TOAHQ, E IN C'S BR (ENGR DTEJ LTR NO.

23.01.9 01.055.02.792.03.23.70.78

l

It

I

I

TECHNICAL SPECIFICATION OF HOOKAND LINE SET

A-7-lRESTRICTED

Ser Description Required Technical SPecifi cation Must be fllled un bv thePrinci o al /ma nu'fr.fu i".

Rmks

L. Name of the Equipment Hook and Line Set

2. Name and CompleteAddress of Local Aeent

To be mentioned

Name and CompleteAddress of Manufacturer

To be mentioned

4. Name and CompleteAddress of Principal

To be mentioned


6. Country of 0rigin USA, Canada, UK Austria, Belgium,Denmark, Finland, GermanY, France,

Hungary, ltaly, Ireland, Netherland,Sweden, Nomay, Switzerland, SPain,I:nan- Australia. Turkev & South Korea.

7. Country ofAssemblYo. Country of Manufacturer

q Year of Production Brand new and year of production notbefore the calendar year of contracL

10. Hook and Line Set Following components should be includedand ouantiw to be mentioned

a, For Kitno 4I Real with Kevlar rope, filled with snap hook (1 offl') Hook, small 1 inch, single plain (1 offJ

'3) Hooh medium 2 inch, single plain [1 oftJ

4) Hook, medium 2 in.hr do!!19!]3in (1 ofO

isl Hook, large single Plan (1 offJ

t6) 25 mm eye (2 offJ

:7) Rope sling,3 mm dia x 2 m long (2 offlJ

fB) Rope sling,4 mm dia x 2 m long (2 offJ

:9) Rope sling,5 mm diax 2 m long (2 ofO

10) Wire sling, 1,5 mm dia x 2 m long (2 offJ

1l Wire sling, 2.0 mm dia x 2 m long [2 offJ

2) Wire sling, 3.0 mm dia x ?,m long (2 ofO

13J Piton, small spearPoint (1 offl74) Piton, large spearPoint [1 ofO

151 Double suction Pad [1 of!(151 Selflicking'moleCrip'1vlth?q-lIrn Jyegef0-771 Karabinerfal]oyJlsmmscrewgateZTkn(2 ofo

1Bl Karabiner (allovl 25 mm screw gate27 kn (2 off)

79) 2 Pulley with jamrn". glgq{!f02U Shackle, D shape 13 mm gate (1 off)

t21) Screw eye selftaP (10 offJ

(22) Adiustable clamp system (1 off)

t23l Doorstop [4offltZ4\ Multifunction pocket tool kit (41 ofO

(251 Pulling handle for Kevlar rope (1 offJ

(26) Line Branch (1 offl(27) Telescope Pole (1 offJ

fZel Hook, 25 mm width mouth and spring lerd"4!9!9{1!E-Zg) Hoot, 50 mm width mouth and spring leaded gate (1 oft)

i30l Spring loaded selfgrip clamp (2 off(31) Bell sling [ 1 offJ

(32) Automatically opening snatch block (4 offl(331 Ball to open snatch block [Z off)

t34l SelfAdhesive PadAnchor [ 10 ofQ

(351 Door away Ancho. 700-11!9 .-llit!-"v!:lX 9f0361 Sledee (1 offlB7) Canvas case with foam cutout (1 of|J3S'1 triple i,ook, with mount for telescope pole (2 off J

11, Color White12. List of Standard Accessories for full range of operation/use List to be submitted

13. List of Optional Accessoriestifanvl


#

l

t,

I

1l

I

rl

I

I

(

l;,

I

;

I

ll

l

I

l

I

l

tl

Ser Description Required Technical SPecifi cation Must be filled uP bY thePrincinal /manufacturer

Rmks

L4, Any other To be mentioned (AnY otheritems/accessories not mentionedabove but require for full range oroperation/use of the offered Hookand Line set)

1*Anchor large grd2+Anchor Piton2*Anchor Suction CuP

10*Anchor Pad Self Adhesive

.1*Clamp Alligator2+Endless looP med 60 cmZ*Endless looP large 120 cm

2*Shock Cord Iong2*Shock Cord med2+Couoler multi hook

Note: Following information/documents to be suPPlied

alone with the offer:a. Details ofworkingPrincipal

Ideal for dismount render safe

procedureProvide standoff distance whilemanipulating susPect objectAssortment ofhooks for any scenario

b. Functional/UsersTraining in country to beprovided by foreign/ localexDerL

UK,USA, GermanY

c. Provision of suPPlY ofmajor and spares for minimum1.0 years.

C..tif,*t" t, b" Provided bY the

Manufacturer.

d. Provisionoffastandslow moving sPares forminimum 10 vears.

Certificate to be Provided bY theManufacturer' ta

e. Model validitY in YearsIminimum 10 YearsJ.

C"rtificat" to be Provided bY the

Manufacturer.

f. Certificate for exPortand shipment of equiPmentfrom country ofManufacturer

N" rbf.tirt, *ttifi."t- to be Providedby the Manufacturer duringsubmission of offer

g. List of sPares, SPecial

Services Tools (SST)/SPecialC-^,ira Metprial fSSM)

IiIETe provided by theManufacturer

h Any other relevanttechnical information maY also

be enclosed.

To be mentioned

RESTRICTED

A7-2RESTRICTED

KI

!l

I

!

rl

l

RESTRICTEDAPPX-B TOANXATOAHQ. E IN C'S BR (ENGR DTE) LTR NO.

23.07.9 0L.055.02.792.03.23.10.18

I

tl

I

l

l

ll

I

I

I

l

1

TECHNICAL SPECIFICATION OF DE.ARMOR OR EQUIVALENT

A-8-1RESTRICTED


Name of the Equipment De-Armor or Equivalenta Name and Complete Address of Local 4g9ql To be mentioned

J. Name and Complete Address of Manufacturer To be mentioned

4. Name and Complete Address of Principal To be mentioned


6. Countrv of 0risin USA, Canada, UK Austria, Belgium, DenmarhFinland, Germany, France, Hungry Italy, Ireland,


laoan. Australia, Turkev and South Korea

7. Country of Assemblyo. Country of Manufacturer,

q Year of Production Brand new and year of production not before theyear ofcontract.

-

10. Description/Purpose of Equipment NATO stocks number [NSN) to be mentioned fbrNATO countries. It is extremely powerful tool forcuttins ofl iamming or parting fuze dynarq4qlly'

a. De-Armor Fin/spin stabilized plains slug projectile/ varioussteel sluqs proiectiles.

b. Caliber A set should include 12.5 mm, 29 mm or nqarer

calibers Disrupter/De-armor eacb-c. Type ofCartridge Item should include RC, Avon and steel Slugs (Blade,

Flat and Chisell

d. Quantity Following quantity of Cartridge/Bteel slug to be

required for each set ofDe-Armor/Di r!p!gl;1?. \ RC Cartridpe Ior Eouivalent]f e'l 1? ( mm RC C2rtridses 18 srain - Otv 200 rds

rbl 1-2.5 mm RC Steel Slugs Regular- Qty ?!IEf

- (c) 12.5 mm RC Avon rounds- Qty 20 rds fAvon rds needs carts

srain to firel18

Certridses 85 srain-.Otv 500 rdsrhl ?.o Steel Sluss Reeular- 0w B0 rdsfcl ?o Steel Shrss Flat Head- Otv 40 rds

)(r Stepl Slrrss Chisel Head - OW 40 rds( i ?_o Steel Sluss Blade TvPe - QW 40 rds

(0srain cartsl

20 mm Avon rounds 70 grain - Qty 100 rds fAvon rds consists 70

)q cartridse Ior Eouivalent]carrridses 1 05 srain - OW 180 rds

rhl ?.9 Steel Sluss Resular- Otv 20 rds

(c)srain cartsl

29 rn* Arro, Rounds 105 grain- Qty 20 rds (Avon rds consists 100

tropicalclimate'Certificateshouldbeprovidedtothis effect by the manufacturer alqng with the offur and s

rrent year (2016)' Certificate should

nrovided to this effect bv the manufacturer aloqg with the offur and stor$be

@in storage, t.".rrpo.tuti* "t. r.,d should not cause any health

tazard. Certificate should be provided to thii effect by the manufacturer along with the offer and

storevided bY the manufacturer

along with the offeras mentioned below should be

furnished along with offer and ammunition - ' -

(11 WarrantY Certificate The arlmo supplied are brand new, complete ofgood material and workmanship throughout and

ihat in the event of any shortage, defects/darnhges

being found after inspection the ammo should be

repliced by the supplier at their own cost within 06

(six) months as the case arises' The warranty

period of the stores will be 12 (Twelve) months

irom the date of issue of "lnsp94&4 I'{g19--

AT

I

.,

l

I

I

1.

2\ 20 mm Cartrjdeelo-f-Esuivalrno

RESTRICTED

I

I

I

I

tl

l

I

1

ll

I

I

Ser Description Required Technical Specifiication Rmks

(2) ShelfLifeCertificate The shell life of the ammo will be 15 fFifteen) years

from the date of manufacturer. If tbe ammo are

found defective within the shell life the ammo

should be replaced by the suppiier at their own cost

ICFR basisJ within 06 months as the case arises

k. damP, insecs or any.other harmful

material during storage unto the shelflife. Certificate should be provided'to this effect by the

manrrfartrrrpr alnno with the offer and store.

Ieach lot ahould be

furnishedineachbox :: : : :: ;m, Tdlrgsi*.tridg" ,* t" be security packed with a sea worthy and clearly marKed lor sale

*rrit 6i rirlreafroad/rail. rhe paci<ing and marking will be done by the supplier in such a

manner that the slugs/cartridge *itt ,roiU. affected by sea water, raid water, damp weather

n. Boxes of cartridge should be paintecl in mito Dronze greL

p. AII marking and other details should be in Engtlsn language

q. A,-ltty c"-rtr"l and inspection certificate by the must De provlqeo alonB w

the store.All

";tifrcrte and t"tter of authorization should be originalr.

s.month after receiPt of cartridge

of coniignee,s end provided the visual lnspection is satisfactory and the case of

clarificati,on/replacement of cartridge if any is settled as per visual inspection report and post

,tiprr""t test firing formalities are completed within the time (one month). Part Inspection

Notewillnotbeissued' ::: :: :

t. facturer should be Provided

Ceriificate I along witu.

id Proiectile' end caPs'

from a distance of max

300-400m:::::Breech/BarrelassemblY

As " "tirir".*

th"uld consist breach plug and capture gate

assembly to be mentiqned

x. Compensator To be mentioned

v. Barrel short &lons

Minimum 40 mm

Mounting blockassembly

To be mentioned

aa. Laser sightassembly

Minimum 40 mm adaptor

bb. Stand/Tripod t ight weight tubular multi position stand for each caliber ctlsrupter

cc.

26. Stanr off Capability To be mentioned

27. Stand Alone CaPabilitY To be mentioned

28, Details list of comPonents To be mentioned

29. Number of Barrels To be mentioned

30. Recoilless To be mentioned

31. Can be used as Disruptor To be mentioned

32. Twe and Source of Powqf{l!-Cgg ts) To be mentioned

JJ. Maximum mass tbe Jplglq rAn fiIq- To be mentioned

34. Weieht To be mentioned

*

A-8-ZRESTRICTED

I

I

l

;I

I

I

It

!

I

I

l

tl

l

I


35. Color As per requirement I To be mentioned]

36. Quality of Store a. The stores must be Brand New and. freefrom any defects/damages. Certificate shotild beprovided by the manufacturer along with the offerand stores.b. The stores must be suitable for use intropical climate. Certificate should be provided bythe manufacturer along with the offer and stores,c. The stores must be safe in storage,kansportation use etc and should not cause anyhealth hazard during storage or in use. Mnufacturershould give a certificate to this effect along with theoffer and stores.d. Quality control and inspection certificateby the manufacturer must be provided along withthe offer and stores.

37. Original Catalogue/Brochure/ Manufacturer'se-Manual

0riginal Catalogue/Brochure/Manufacturer's e-manual containing General, Technical, Operationaland Maintenance data to be provided by themanufacturer along with the offer and stores.

38. Any Other To be mentioned (Any other items/accessories notmentioned above but require for full range ofoperation, of the offered De'Armor to be mentionedand must be suppiied with the De-ArmorJ

Notc: Following information's/ documents to be supplied along with the offer:

a. Details of working principle. Details to be mentioned

b. Functional/users training in countryto be provided by foreign/Local experL

To be mentioned

c. Provision of supply of major sparesfor minimum 10 years,


d. Provision of'supply fast and slowmoving jpares for minimum 10 years.


e.

vearsl.Model validity in years (minimum 10 Certificate to be provided by the manufacturer

f. Certificate for export and shipment ofeouinment from countrv of manufacturer

No objection certificate to be provided by themanufacturer during submission of offer

g. List of spares, Special Service Tools[SSTI/Special Service Material (SSM]

List to be provided by t}re manufacturer

h. Any other relevant technicalinformation may also be enclosed.

To be mentioned ,.

RESTRICTED

A-B-3RESTRICTED

)4'

I

I

l

I

I

'l

RESTRICTEDAPPX-g TOANXATOAHO. E IN C'S BR TENGR DTEI LTR NO,

23.07.9 07.055.02.192.03.23.70.78

I

ll

!

I

I

I

lr

I

I

I

TECHNICAL SPECIFICATION OF ROCKET WRENCH OR EQUIVALENT

A-9-1RESTRICTED


7 Name of the Equipment Rocket Wrench or Equivalent2. Name and Complete Address of Local

AsentTo be mentioned


To be mentioned

4. Name and Complete Address of Principal To be mentioned5. Brand & Model To be mentioned6. Country of Oriein USA" Canada, UK Austria, Belgium, Denmarh

Finland, Germany, France, Hungry ltaly,Ireland, Netherlands, Sweden, Norway,Switzerland, Spain, Japan, Australia, Turkeyand South Korea

7. Country of Assembly8. Country of Manufacturer

9. Year of Production Brand new and year of production not beforethe year ofcontract. "

10. Description/Purpose of Equipment. a. NATO stocks No (NSN) to be mentionedfor NAT0 Countries.b. The equipment is remotely operatedwhich is designed to dynamically unscrew andremove a wide range of fuses. It can be set upto rotate clocloarise and anti-cloclnadse, Theeqpt is designed to fire remotely from a safe

distance.

a. Features Designed for EOD specialist. Special transportcase & accessories

b. Caliber To be mentionedc. Ammo Quantiff 40 rds ffor each setl

d. Piston and End Cap S€t 4 Box fEach box shou]d contain 100 setsl

e. Dimension To be mentionedf. Weieht To be mentioned

s.. List ofAccessories To be providedh. Anyother To be mentionedNote: Following information's/ documents tobe supplied along with the offer:a, Details of working principle' Details to be mentionedb. Functional/users training incountry to be provided by foreign/LocalexDert,

To be mentioned

c. Provision of supply of majorspares for minimum 10 Years,


d. Provision of supply fast and slowmoving spares for minimum 10 years.


e. Model validity in years [minimum10 vearsl.


f. Certificate for export and shipmentof equipment from country ofmanufacturer


g. List ofspares, Special Service ToolsfSSTI /Snecial Service Material [SSM]

List to be provided by the manufacturer ,,

h. Any other relevant technicalinformation may also be enclosed.

To be mentioned

I

I'

;l

l

I

I

I

,ll!

RESTRICTEDAPPX-10 TO

ANXATOAHQ, E IN C'S BR IENGR DTEJ LTR NO.23.07.9 01..055.02.792.03.23.t0.78

,

It

I

l

I

lt

I

l

I

ll

TECHNICAT SPECIFICATION OF ULTRASONIC WALL THICKNESS METER

A-10-1RESTRICTED

Ser Description Required Technical Specification Rmks

1. Name of the Equipment Ultrasonic Wall Thickness Meter2. Name and Complete Address of Local Agent To be mentionedJ. Name and Complete Address of

ManufacturerTo be mentioned

4. Name and Complete Address of Principal To be mentioned5. Brand & Model To be mentioned6. Country ofOrigin USA, Canada, UK Austria, Belgium, Denmarh

Finland, Germany, France, Hungry Italy,Ireland, Netherlands, Sweden, Norway,Switzerland, Spain, Japan, Australia, Turkeyand South Korea

7. Country of Assemblyo. Country of Manufacturer

9. Year of Production Brand new and year of production not beforethe year ofcontract.

10. Description/Purpose of Equipment. a. NATO stocks No [NSN) to be mentionedfor NATO Countries.b. It's a small portable device to measurethickness of a bomb case, suspected tube,metal or case.

a, Features Designed for measuring thickness of a Bomb

b. Error 01% lmaxlc. Display LCD

d. 1.5 V Battery with min Endurance of300 hrs

e. Dimension To be mentioned

f. CapaciW of Measure To be mentioned [0.5mm-500mm]

s,, ListofStandardAccessories List to be submitted

17 Colour As per tender requirement12. Any other To be mentioned. (Any other items/accessories

not mentioned above but require for full range

of operation/use of the offered Ultrasonic wallThickness Meter to be mentioned and mudf besupplied with the Ultrasonic wall ThicknessMeterJ.

Note: Foltowing information's/ documents to be supplied a!S!8lq{h,!!9 i&r'a. Details of working principle. Details to be mentioned

b. Functional/users training in countryto be provided by foreign/Local expel!.

-

To be mentioned

c. Provision of supply of majorspares for minimum 10 years,_


d. Provision of supply fast and slowmoving spares for minimum 10 ye4rs.


e. Model validity in years (min 10 years). Certificate to be provided by the ma4qfactulgl

f. Certificate for export and shipment ofequipment from country of manufacturer


g. List ofspares, Special Service Tools

f SSTI /Special Service Material ISSM)


h. Any other relevant technicalinformation may also be enclosgd.

To be mentioned

DT n /laOCT 2018----V7- ..

1l

I

I

I

1l

I

I

1t

RESTRICTEDAPPX-11 TOellxe roAHQ. E IN C'S BR (ENGR DTE) LTR NO.

23.01.901.055.02.192.03.23.10.18

TECHNICAT SPECIFICATION OF EOD BOMB TOCATQR

A-11-1RESTRICTED


1. Name of the Equipment Bomb Locator2. Name and Complete Address of Local Agent To be mentioned


To be mentioned

4. Name and Complete Address of Principal To be mentioned


6. Country of Origin USA, Canada, UK, Austria, Belgium, Denmark,Finland, Germany, France, Hungry Italy,Ireland, Netherlands, Sweden, Norway,Switzerland, Spain, Japan, Australia, Turkeyand South Korea

7. Country of Assemblyo. Country ofManufacturer

9. Year of Production Brand new and year of production not \pforethe calendar year of conffact.

10. Overall Dimension [L x W x H] To be mentioned

77. Bomb Locatora. UXO and UXB (Shells and bombslocating depth)

Should be able locate

[1J Small Bombs up to 0.5 kg at 1m(2J Tank Mortar, Shells at up to 2-3m.

[3J Up to 500 kg bomb at 4m.(4J Up to 500 kg Bomb at 6m.(5) Under water the probe should be water

tisht to a depth of 100m.

b. NATO Specification NATO stocks number (NSN) to be mentionedfor NATO countries.

c. Scope ofDetection Should be able to detect UX0, Bomb, Shells andall types of mines in all-weather condition inland, water and borehole use.

d. Sampling Methodology/ Method ofFunction

Endurance of 300 hrs

f1l For Metallic Twe Details to be mentioned(21 For Non Metalic type Details to be mentioned

e. FalseAlarm rate Less than 01%o

f. Warm up time/Calibration To be mentionecl (for regular and extendedshut down oeriodJ

s. Time of Continuous OPeration Minimum 2 hours

h. Detector SensitivitYf1l For Metallic Type Details to be mentioned

f2l For Non Metalic type Details to be mentioned

12, Detection Capaciw As per tender requirementa. Detection of UXO and UXB, Will be able

to identify all UXO and UXB withprogrammable detection capability orequivalent

Detection/ identification capacity tomentioned in details,

b. Detection of Small Bombs. Shells. Ammoand Mines. Will be able to identify alltypes of Small Bombs, Ammo, Mines and

others with programmable detectioncapability or equivalent

Detection/ identification capacity - tomentioned in details, 1t

15. Detection Technology Based on latest technology in UXO and UXB

detection.

14. Controls Power switch audio control and vapourDarticulate selector etc to be mentioned.

15. LCD Indicator LCD for status message to be provided.

+

I

I

I

I

rl

I

I

lr

I

t,

RESTRICTED

I

tl

I

I

I

tr

I

I

Ser Description Required Technical SPecifi cation Rmks

t6. DC Power Supply DC rechargeable battery, power, operating timeand rechargeable time to be mentioned (fordifferent type of power supply, details tomentionedJ. Low battery alarm to be visible and

audible.

17. Battery and Charger 01 Set rechargeable battery with batterycharger (220VAC,50 HzJ and 01 setsparebattery to be Provided

18. Ooeratine and Storage Iemperaturea. 0peratingTemPerature From 0o C to +500 C (\tUfmum)-

b. StorageTernPerature From -5oC to +500C (Mini4q4)L9. Humidity Minimum 95o/o at operating tenqpelatule

20. Alarm Method Visible and confiqurable audible

2L, Data Display tntegrated LCD Connection for optional external

monitor and keyboard')) Overall Weisht

a. Hand Held Unit 3.5 km fmaximumJ with battery

b. Complete Set 15 km fmaximum)

23. List of Spares fo Ue provned and per supplier/ manufactuttrrecommended spare parts list with 100%

updated master spare parts catalogue in English

(Booktype/soft copyJ and completed and

update master spare parts price catalogue/listin English [book tYPe/soft coPY').

24. Tools List for different Level ofMaintenance

To be provided as Per manufacturesrecommended tool list and detail maintenanceschedule at different level to be mentioned

25. List of Standard Accessories for full range

of operation/ use


26. List of 0ptional Accessories (if anyJ List to be submitted

27. Color To be mentioned

LO. Any Other To be mentioned (Any other items/ accessories

not mentioned above but require for full range

of operation, of the offered Bomb Locator to be

mentioned and must be supplied with the Bomb

Locator).

29. Required Documents f otto*irS original documents/certificates to be

submitted along with offur

i Original catalogue/brochure for Bomb

Locator,

To be submitted

b. A soft copy of the whole documents To be submitted

c.Detailsofwo@ Detaiis to be mentioned

d. Provision ofsupply ofmaior spares forminimum 10 years.


e. Provision of supply fast and slowmoving spares for minimum 1Qy941q,--


f.tr4odelvalidi@ Certiflcate to be provided by the manu

gJertificate for export and shipment ofeouioment from country of manufacturer

t'lo oUjection certificate to be provided by the

manufacturer during submission of offer'

h. Lirt of tpr.es, Special Service Tools

fSSTI/Special Service Materi?l (SSMI'List to be provided by the manufacturer

j. Any other relevant technicalinformation maY also be enclosed'

To be mentioned r,

)4-

A-71-2RESTRICTED

l

l

I

I

I

RESTRICTED

A-12-lRESTRICTED

APPX-12 TOANXATOAHQ, E IN C'S BR (ENGR DTE) LTR NO.

rl

I

I

l

I

I

I

lr

I

I

ll

I

Ser Description Required Technical Specifi cation Must be filled up by thePrincipal/manufacturer

Rmks

1 Name of the Equipment Manipulating Stick/TelescopicManipulator

, Name and CompleteAddress of Local Agent

To be mentioned

3. Name and CompleteAddress of Manufacturer

To be mentioned

4. Name and CompleteAddress of Principal

To be mentioned


6. Countrv of 0risin USA, Canada, UK, Austria, Belgium, Denmark,

Finland, Germany, France, Hungary, ltaly, Ireland,7. Countrv of AssemblvB, Country ofManufacturer Netnerlano, 5weoen, NoMay, )wltze[l

lanan. Australia. Turkev & South Korea.

o Year of Production Brand new and year of production not beforethe calendar year of contract.

10. GeneralDescription/Purpose

NATO stocks number [NSN] to be mentioned'The Manipulating Stick to recover move anddispose off suspicious objects. Details to be

eiven including the following:

a. Length (comPletelYextendedl

Maximum 6 m

b. Working Distance Minimum 3-4 m

c. Claw (curved and interlockins attachedl width

B inch

d. Carrying Load aJ 10 kg when extended at 4.5 mbl 15 kgs when extended at 3 m

e. Rotation ofClaw 360'f. weight fwith battery) Aonrox 15 Kss

g. Power SuPPIY 01 x set Rechargeable Battery with 01 xBattery Charger (220VAC,50Hz J and 01 set

sDare battery to be Provided.

h. Telescope Pole Its length is 5m, Dia 5Omm Alurninlgrnllle.11 List of Standard

Accessories for full range ofonPration /ilse


11 List of Optional Accessories

IifanylList to be submitted

13. Color BlackSilverL4, Any other It has a bipod which will help to carr more

loads thus increase the capabiliry.

N"t.'. F"il"rlltrS information /ao1:uments to te supptl

a. Details ofworkingPrincipal


b. Functional/UsersTraining in country to beprovided by foreign/ localexnert.

a) At first local op can be sent to get trainingby the foreign experts.b) Later they can train other local op tlroughany course/cadre.

c. Provision of suPPlY ofmajor and spares for minimum10 years.


d, Provision of fast andslow moving spares forminimum L0 years.

Certificate to be Provided bYtheManufacturer.

e. Model validity in Yearsfminimum 10 years).

Certificate to be provided bYtheManufacturer.

f. Certificate for exportand shipment of equiPmentfrom country of Manufacturer

No objection certificate to be provided bythe Manufacturer during submission of offer

g. List of spares, SPecial

Services Tools [SST)/SPecialService Material (SSM)

List to be provided bY theManufacturer

n. eny' other relevanttechnical' information maY alsobe enclosed.

bptional claws can be added which can be ofdifferent sizes.

I

I

d(


ANXATOAHq. E lN C'S BR IENGR DTEJ LTR NO.

23.0 1.901.055.02.192.03.23.10.18W11

I

I

,l

I

!

TECHNICAL SPECIFICATION OF NON LINEAR JUNCTION DETECTOR

Ser Description Required Technical Specifi cation To be filled upby themanufacturer/Princioal

7. Name of the Equipment Non Linear Junction Detector

2. Name and Complete Addressof Local Agent

To be mentioned

5. Name and Complete Addressof Manufacturer

To be mentioned

4. Name and ComPlete Addressof Principal

To be mentioned

5. Brand and Mode] To be mentioned

6. Country ofOrigin USA, Canada, UK Austri4 Belgium, Denmark'Finland,'Germany, France, Hungary, Italy, Ireland, Netherlands,

Sweden, Norway, Switzerland, Spain, Japan, Australia,

Turkey & South Korea

7. Countrv of Assemblyo. Country ofManufacturer

9. Year of Production Brand new and year of production not before the

calendar year of contract

10. General Description/PurPose NATO stocks number (NSNJ to be mentioned for NATO

countries. A compact high power pcrtable detectorthat can be used for detection of all kinds of Non Linear

Junction.

11.

a. Capability[1l Searching ability through Leather, Meta] and Br

t2) Searching and imaging ability on the spot

r3l Electronic device detector

r4l Discriminate true electric julction and fafse corr

rsl OeGction of electric surveillance deric" ,r,d e*plositef6l Unobtrusive boc y search, mail screening anq 3M ryyggplgg-(7) Set up time should not be more than 2 minutes

tBl Wireless Option- To be availablefel Field operable, light weight and robust

b. C"*p"r..tt F.tL*rirg componelfls should be inclu(11 Harmonic handheld radar(2) Field operable and handheld receiverr3t Radio transmitters(4) Power amplifi er microPhones

tsl Electronic times

Gt 01 set battery with battery charger (220VAC, 50 HzJ and 01 set spare

hatterv(7) Pelican case/Transit case

c, General Requirements

t1l weieht of the operational accessories should not be more than 10 kgs

(2)mentioned

Working temperature -04sC to +55eC, storage temperature to be

f 3l Minimum tlme of continuous operation should be not less than 4 hours "(4) Field opera table and able to locate concealed

r5') Training of operators-To be mentioned

List of StandardAccessories for full rangeof operation/use


72. List of OPtionalAccessories fifanv)


13. Telescopic Pole Should be of collapsible type with a minimum extended

leneth of B0 cm and should have firm clamps fasteners-74. Audio Alarm Provision from in U

15. False alarm rate Less than 3%o

L6, EMI Interference Should not activate radio controlled devices withoperating frequency within HF/VHF range in closeproximiW

A-13-1RESTRICTED

x

I

I

I

l,

I

I

I

RESTRICTED

A-13-2RESTRICTED

Ser Description Required Technical Specification To be filledup bythe

manufacturer/ Princinai

17, Colour To be mentioned18, Any other To be mentioned. (Any other items/accessories not

mentioned above but require for full range ofoperation/use of the offered Non Linear |unctionDetector to be mentioned and must be supplied withthe Non Liner Junction DetectorJ.

Note: Following information /documents to be slrpplied along with tha. Details of workingprinciple.


b. Functional/users trainingin country to be providedby foreisn/ Local expert.

To be mentioned

c. Provision ofsupply ofmajor spares for minimum10 vears.


d. Provision of supply fastand slow moving spares for,minimum l-0 years.


e. Model validity in years[min10 wsl.


f. Certificate for export andshipment of equipmentfrom country ofmanufacturer


g. List of spares, SpecialService Tools (SSTJ/SpecialService Material [SSM')


h. Any other relevanttechnical information mayalso be enclosed.

To be mentioned

l1

I

I

I

It

I

I

l

lI

I

I

t,

t-

1T

I

rl

l

I

t-

IAMMER)

RESTRICTED

A-14-LRESTRICTED

APPX.14 TO

ANX A T0 t.AHo, E IN C'S BR IENGR pTE) LTR NO,

23,01.901.055.02.192.03.23.10.18

Ser Description Required Technical SPecifi cation To be filled up bythemanufacturer/PrinciDaI

7, Name of the Equipment Network lamming System [Light Weight Backpack IED Jammer]

2. Name and Complete Address ofLocal Agent

To be mentioned

a Name and Complete Address ofManufacturer

To be mentioned


To be mentioned


6. Countrv of Orisin USA, Canada, UK Austria, Belgium, Denmark, Finland, Germany,

France, Hungary ltaly, Ireland, Netherlands, Sweden, Norway,switzerland. SDain. IaDan, Australia, Turkey, South Korea

7. Country of Manufacturer/ AssemblY

Year of Production Brand ne* ind year of production not before the calendar year

of contracto General Description/PurPose aJt can be configured to block/jam all types of devices within

the frequenry band ofVHF and UHF.

b. Fully weather, water (splash & rainJ and dust proof'c, Relatively small and backpack mounted,d, lt will support one/several open communication window on

each band for own communication.

10. Dimension of lammerflx H x!1I) To be mentioned.

11 weisht of IED Jammer system [kg) Not more than 25 kg.

72. Twe of Iamming To be mentioned 04Ihether barrage, spot.... etcJ.

13. Jamming technique OOS (nifferent digital Synthesis) to be used to generate jamming

ontnuL

t4. Operational Jamming Radius 3600

15. onerational Iammine Range fml Minimum 40m (RadiusJ (Detail explanation required)

76. Continuous UninterruPtable

famming Operation EndurancePcriod

To be mentioned.

1a Power Output fw)rrTotal RF

Power/Total Transmission powerDetails to be mentioned

Band rrequ"ncy I wau

18. 0peration Frequency Range Details to be mentioned

Band rrequency I watt

79. Transmitter Frequency Range(MHz)

a. From 20 to >2500 MHz.

b. The system must be configured/ programmed by the

end user at any frequency within 20 to >2500 MHz down to 1

KHz resolution.

20. Number of Different FrequencYBand

Minimum 03 Typical.

27 Available Jamming Standard vrlr, uuF, wini, Bluetooth GSM [2G, 3G) (lf more than- To be

mentioned).

Real lamming Frequency Band in'aParticular Type of Frequency Band

Details to be mentioned.

Time Required for Preparadonbefore Oneration

Not more t}Ian 01 minute'

24, Power Consumptiona. At Maximum RF Power To be mentioned

b. At Stand By Mode To be mentioned

c. Operational Power Source To be mentioned

25.a. Type of Batlery ;: Lithium-ion/lithium-polymerorequivalenL

b. 01x setrechargeable batterywith charger and 01xset sDare battery to be ProvidL

b. Battery 0perating Time Minimum 2 hours Continuous,

c. Low Battery Alarm The sysEm shorld ha\re audio/visual indication for low batterywarnins.

d Battervchargingtime' To be mentioned.

-{

t!

l

I

I

ll

l

1l

I

I

I

lt

I

RESTRICTED

I

I

!

I

I

I

1

Ser Description Required Technical Specification To be filled up by themanufacturer/Principal

26. Antennaa. Type Hish Gain Omnidirectional Antennas.

b. Number ofAntennas To be mentioned (Minimum 2, Must cover fullfreouencv ranse 20 to >2500 MHzl

c. Antenna Impedance IOJ To be mentioned lQ

d. Antenna Height Maximum 1.5m

e. Antenna sensitivity To be mentioned.)1 Cooling System of IED Jammer To be mentioned.

28. 0oeratine Humidiw Uoto 90% fAble to Operate in BD Humidityl.

29. Radio Frequency (RF)/EMI ShieldingHeat & Shock/Vibration/ProtectionSystem

nf a fUI Shielding protective layers to avoid

RF/EMI interferences including Anti-Vibration,struck & SAR protection (MlL Compliance Standard-

To be available [Details !o !e mentioneg-).

30. Protection against Radiation/ Radio

Frequency/f amming Signal Effect on

person carrying fammer

a. The equipment must be designed to protect

user from radiafion hazard.b. Certificate to be provided by themanufacEurer.

31 AII components of IED Jammer should

be able to withstand minimum ,95%Humidity or above tyPical to BD

weather

To be mentioned.

32. Built in Diagnostic Self Test/AlarmSystem

a.VSWR.b. Low & Over Voltage.c.Over Temperature"d, Additional features to be mentioned.

33. Connectivity ilEo ;amrner should have provision ofvarious ports

(Ethernet/LAN/HDMI etc) for connectivity with

;xternal Computer/Laptops/ Modem etc forsoftware integrationb. lt will have provision of wiredfwireless remote

connectivitv to oDerate the iammer from a distance'

be provided (Details to be men

35. Control Software ; ilsily P."grammable Software to be installed in

Windows or later version operating qystem.

b. Control and programming backup software to be

available with the system.c. Details about the software to be provided with the

tender document.

-

5/, List of Standard Accessories for fullranse of operation/useList of Optional Accessories (if any')


I.isr to he subiinnad

39.;d

? <on41. I Maxlmum upel.aLlulldt nILtLuus tur I

42. I Combat 0perational Temperature -100C to + 60oC

43. Maintenance Mlintenance s"rvice to be provided bymanufacturer for 1 (one) year from the date ofissue.

44. I Any other T, #;".ti"r.d- tAry other items/accessories

not mentioned above but require for fulI range

of operation/use of the offered Light Weight

Backpack IED Jammer to be mentioned and

*uri b. supplied with the Light Weight

Backpack IED JammerJ'

Note: FollowinC i4olrn3gglEgglgntgl t" be suDDtied along with the offer:i*;i. tn he mentioned

b. f r,rttit"attrt..t t*i.ir,g in country to be To be mentioned.

i. F.*iSon of supply of major spares

for minimum 10 years

-d. Prorrision of supply fast and slow

movins spares for min 10 Yrs,.ti,li MI 10

Certtficate to be provided by the manufacturer'

C"rtifrcat" to be provided by the manufacturer'

f Cettifi."te for e-prrt and shipment of

equipment from country ofmonrrferhrrcr

No obfction certificate to be provided by the

manufacturer during submission of offer'

I Lirt of spi..s, Special Service Too]s

iSSt)/special Seruice I.44-!94eL [!!lullh. Any other relevant technical

information maY also be enclo

List to be provided by the manufacturer'

To be mentioned.

A-L4-2RESTRICTED

*

rl

l

I

I

I

l

t,

I

l

A Milirrr\/ Lrntnn IRrrsped LaDtoDl

cPS Faciliw flnbuiltl nn cri')

Backnack Carrier

I

lr

I

l

RESTRICTED

APPX.1s TOANXATOAHO. E IN C',S BR (ENGR pTE) LTR NO.

23.01.901.055.02.192.03.23.10.18ry?*TECHNICAL SPECIFICATION OF PORTABLE X-RAY SYSTEM

A-15-1RESTRICTED

l

ll

I

I

T

Ser Description' Required Technical Specifi cation To be filled up by tttemanufacturerfPrincioal

tal tb) (cl tdl1. Name of the Equipment Portable X-ray System) Name and Complete Address of

Local AeentTo be mentioned

J. Name and Complete Address ofManufacturer

To be mentioned


To be mentioned


6. Country of 0rigin USA, Canada, UK, Austria, Belgium, Denmark,Finland, Germany, France, Hungary, Italy, Ireland,Netherlands, Sweden, Norway, Switzerland, Spain,Taoan. Australia, Turkev & South Korea

7. Country of Assemblyo Country ofManufacturer

9. Year of Production Brand new and year of production not before thecalendar year of contract

10. General Description/Purpose NAT0 stocks number INSNJ to be mentioned forNATO countries. A compact high power portable X-

ray that can be used with the real time viewingsvstem consist oi

a. Capabiliw(11 Scanning abiliry through as following:

a. Steel penetration ability: 25 mm fminimumJb. Brick Wall penetration ability: To be mentionedc. Wood penetration ability: To be mentionedd. Leather penetration ability: To be mentioned

[2i Searchine and imaeine abiliW on the spot

[3] lrn2ge analysis must include zoom, reverse and portl4y]ng !]!qensional@-(41 Imaee printine abiliWf 5l Archivine abiliW of at least 32,000

[6] Wireless option- To be available(7.) Set up time should not be more than 2 minutesf8l Video imasins abiliW - To be available

b. Components

[1) X-ray Generator [Brand, Model and Major technical specification to bementioned')

(2) Laptop with X-ray inspecting software/lmage Processing tools (Brand,

Model and Maior technical specification to be mentionedl(31 Image Caprure and Processing unit (Brand, Model and Major technical

specification to be mentionedJ.

f4l Cable Drum of 50 meter[5] Customized wireless control(61 01x set battery with battery charger (220VAC,50HzJ and 01x set spare

batterv for each eqpt to be provided lQ

[7-] Pelican Case/Transit case

c. General Requirements(1) Weight of the system in operation (X-Ray Generatorand Image

Capture & Processing unitJ -Maximum 12 Kg

(4 Working temperature -04eC to +55eC and storaBe temperature -10eC to+60qC

f 3l Minimum time of continuous operation should be no less than 4 hours

[4] Training of operators[5] Dimension and weight-Details to be mentio4e4

tl List of Standard Accessories forfull ranee of operation/use


L2, List of 0ptional Accessories [ifanvl


13. Colour To be mentioned

tl

I

I

I

I

Ser Description Required Technical Specifi cation To be filled up bythemanufacturer/Princioal

1.4.. Any otler To be mentioned. [AnY otheritems/accessories not mentioned above butrequire for full range of operation/use ofthe offered Portable X-Ray system to be

mentioned and must be supplied with thePortable X-Rav svstem')

wofe' fottowing information's/documents to be supplied along with the offer:


b. Functional/users training incountry to be provided bYforeign / Local expert.

To be mentioned

c. Provision of supply of majorspares for minimum 10 years'

Certificate to be Provided bY tlemanufacturer

d. Provision of supply fast andslow moving spares forminimum 10 years.

Certiflcate to be Provided bY themanufacturer

e. Model validity in years

fminimum 10 yearslCertificate to be Provided bY themanufacturer

f. Certificate for exportshipment of equipmentcountry of manufacturer

andfrom

No objection certificate to be provided bythe manufacturer during submission ofoffer

g. List of spares, Special ServiceTools (SSTJ/Special ServiceMaterial [SSM')


h. Any other relevant technicalinformation may also be

enclosed.

To be mentioned

RESTRICTED

A-15-2RESTRICTED

I

tt

I

I

I

l

It

I

I

I

I

I

I

I

I

*

lr

I

RESTRICTED

A-16-1: . RESTRICTED

l,

APPX-1ETO;[fiToeno. s rN c's nn (rlrcn orq Lrn No.

23.0 1.9 0t.0s5.02.192.03.23.10.18DT ^ O^ OCT2018

tl

I

It

l

I

l

Ser Description Required Technical SPecification To be filled upby themanufacturer/Princinel

L. Name of the Equipment Under Vehicle Search Mirror) Name and Complete Ad4199g o:! !c931 4ggg!- To be mentioned

3. Name and ComPleteManufacturer

Address of To be mentioned

4. Nime and Complete Address of Pri To be mentioned

5 Brand and Model To be mentioned

6. Country of 0rigin USA, Canada, UK Austria, tsetgium, uenmarK,

Finland, Germany, France, Hungary Italy, Ireland,


Iaoan. Australia, Turkev & South Korea-7. Countrv ofAssemblYo. Country of Manufacturer

q Year of Production E;d .e* ,rd year of production not before the

calendar year of contract

10. General Description/PurPose NATO stocks number [NSNJ to be mentioned forNATo countries. A large convex, polycarbonate

mirror with fluorescent lamps in a Splash proofacrylic housing with handling grips and flyinglead, clip fastened to the trolley base. Hinged

aluminum handling and 3-way switch with off,

latching and momentary positions. The mirrorshould offer a wide field of reflected view' Should

have hinged handle to lower to ground levei formax under vehicle penetration detaiis to be

mentioned

a. Dimension of Mirror (L x W] To be mentioned

b. Folding Handle Length To be mentioned

Weipht To be mentioned

d. PowerSuPPlY 01x set rechargeable battery with batterycharger (22OVAC' 50Hz) and 01x setsparebattery to be Provided'Operation time/discharge of batteries up to 8hours.

e. Components Consist To be mentioned

f. Hinged handle to lower groundlevel for max under vehicle penetration

To be mentioned

g. Operation time/Discharge and

Batteries

Min B hours

11 List of Standard Accessories for fullranse of oDeration/use


12. List of Optional Accessqrieil!! enD- List to be submitted

13. Colour To be mentioned

L4. Any other To be mentioned. (Any other items/accessoriesnot mentioned above but require for full range of

operation/use of the offered Under vehicle Search

Mirror to be mentioned and must be supplied

with the Under vehicle S!4I!h-U]II9I]'Note: Followine information's/documents to be supplied along with the offer:

a. Details of working PrinciPle Details to be mentioned

b. Functional/users training in country to be

nrovided bv foreien/ Local expertTo be mentioned

c. Provision ofsupply ofmajor spares forminimum 10 years


d. Provision of supply fast and slow movingsnares for minimum 10 vears


e. Model validity in years (min10 yrsl Certificate to be provided by the manufacturer

f. Certificate for export and shipment ofeouipment from country of manufaqtgler

No objection certificate to be provided by the

manufacturer during submission of offer

; Ltrt "f ti".*, Special Service Tools

ISSTI /SDecial Service Material (SSMIList to be provided by the manufacturer

h. Any other relevant technical informationmay also be enclosed

To be mentioned ,r

A-

rl

I

1

11

I

I


ANX A TOAHQ. E IN C'S BR IENGRDTEI LTR NO.

23.01,901.055,02.192.03.23.10.18

ll

TECHNICAL SPECIFICATION OF FREEZE NEUTRALIZING KIT

A-18-1RESTRICTED

I

ll

I

I

Ser Description Required Technical Specification Remarks

7. Name of the Equipment Freeze Neutralizing Kit

2. Name and Complete Address of LocalAeent

To be mentioned


To be mentioned


To be mentioned


6. Countrv of Oriein USA, Canada, UK, Austria, Belgium, Denmark, Finland,

Germany, France, Hungry, Italy, Ireland, Netherlands, Sweden,N^nr/1rr qr^,iiTprland Qnain Ianan. Arrstralia. Turkev and South7. Country of Assembly

o. Country of Manufacturer Korea

9. Year ofProduction Brand new and year'of production not before theyear of contract

10. General Description/Purpose NATO stocks number (NSNJ to be mentioned for NATO

countries. A device which uses application of super cold liquidNitrogen gas to render a bomb or fuze of a bomb (Electrical orelectro-Mechanicall inactive for a limited period of time

a. Dimension ofContainer(LxWxH)

Nitrogen To be mentioned

b. Liquid Withdrawal device To be mentioned

c. Nose and Tail 'adaPterassembly

To be mentioned

d. Diffuser assembly To be mentioned

e. Bankpressure To be mentioned

f. Nitrogen flow rate 10 ltr/min (max]

s. Operation time/discharged 2 mi [maxJ1-7 Description of RAIK (RemotelY

activated iniector kitJTo be mentioned

12. Extended Capability To be mentioned

13. Man PortabiliW To be mentioned

74. Rapid neutralization CaPacity To be mentioned

15. Continued defeat capability To be mentioned

76. StandAlone Capacity , To be mentioned

77. Configured/Operated to dePloY

manuallv or with the helP of ROV

To be mentioned

18. Details list of components To be mentioned

79. Twes of Neutralizing agents used To be mentioned

20. Working principal of the Neutralizingagents (Each seParatelYJ

To be mentioned

21. Number of Nitrogen container To be mentioned

22. Weighta. Total weight of the E! To be mentioned

b. Weight of the Nitrogencontainer [Empty and filledsenaratelvl

To be mentioned

23. Colour As per tender requirementAA Quality of Store a. The stores must be Brand New and iree lrom any

defects/damages. Certificte should be provided by the manufacurrer

along with the offer and stores.b. The stores m$t be suitable for use in ropical climate'

Certificate should be provided by the manufacturer along with t}le offer

and stores.c. The stores must be safe in storage, transportation use etc

and should not cause any heatth hazard during storage or in use'

Mnufacturer should give a certificate to this effect along witlt tle offer

and stores,d. Quality control and inspection certificate by the

manufacturer must be orovided along with t}re qffetgl4-stol9!'

25. 0riginal Catalogue/Brochure/Manufacturer's e-Manual

Original Catalogue/Brochure/Manufacturer's e-

manual containing General, Technical, 0perational and

Maintenance data to be provided by the manufactureralone with the offer and stores.

I

:

lt

I

1l

l

lt

I

I

I

I

I

I

l

I

I

I

l

I

It

!

I

I

Ser Description Required Technical Specifi cation Remarks26. Any other To be mentioned. [Any other items/acfessories not

mentioned above but require for full range ofoperation/use of the offered Freeze NeutralizingKit to be mentioned and must be supplied with theFreeze Neutralizine KitJ.

Note: Followins information's/docume ts to be supplied along with the o!!qr:


b. Functional/users training incountry to be provided by foreign/Local expert.

To be mentioned

c. Provision of supply of majorspares for minimum 10 years.


d. Provision ofsupply fast and slowmoving spares for minimum 10 years.

Certificate to be provided by the manufucturer

e. Model validity in years [min10vrsl.


f. Certificate for exportandshipment of equipment from countryof manufacturer


g. List ofspares, Special ServiceTools (SST)/Special Service MaterialI'SSMI :


h. Any other relevanttechnicalinformation may also be enclosed.

To be mentioned

RESTRICTED

A-78-2RESTRICTED

*

rl

I

I

I

I

lT

lr

!

l

I

I

lr

1'

I

tl

I

I

I

RESTRICTED

TECHNICAL SPECIFICATION OF FUZE EXTRACTOR

A-L9-7RESTRICTED

APPX-19 TO

ANXATOAHQ. E IN C'S BR (ENGR DTEJ LTR NO.

Ser Description Required Technical Specifi cation Mustlre filled up bythe Principal/

Rmks

1. Name of the Equipment Fuze Extractor) Name and Complete Address ofLocal

AeentTo be mentioned

Name and Complete Address ofManufacturer

To be mentioned

4. Name and Complete Address of Principal To be mentionedMake & Model To be mentioned

6. Country of 0rigin USA, Canada, UK Austria, Belgium,Denmar\ Finland, Germany, France,Hungry, Italy, Ireland, Netherlands,Sweden, Norway, Switzerland, Spain,Iaoan. Australia. Turkev. and South Korea.

7. Countrv of Assemblvo. Country of Manufacturer

o Tvne/Model To be mentioned10. Year of Production Brand new and year of production not

before the vear of contract.11. Genera! Description/Purpose NATO stocks number [NSN) to be

mentioned for NATD countries. FuzeExtractor is an apparatus, capable ofremoving certain types of fuze module,mechanically and from a safe distance.

a. Dimension of Mirror [LxW) To be mentionedb. Iaw assemblv

To be mentionedc. Weishtd. operatione. Components consist

L2. Maximum Distance To be mentionedL3. Minimum Distance To be mentioned14. Details list of components To be mentioned15. Hand PortabiliW To be available1.2. Dimension of Transit case To be mentioned13. Type and Source ofpower gupply (In

detailslTo be mentioned

14. Colour As per tender requirement15. Quality ofstore a. The stores must be brand new and

free from any defects/damages. Certificateshould be provided by the manufacturer alongwith the offer and storels.

b. The stores mustbe suitable foruse intropical climate. Certificate should be providedby the manufacturer along with the offer andstores,c, The stores must be safe in storage,transportation use etc and should not cause

any health hazard during storage on in use.

Manufacturer should give a certificate to thiseffect along with the offer and stores,d. Quality control and Inspectioncertificate by the manufacturer must beDrovided along with the offer and stores.

76. Original Catalogue/Brochure/ Manufacturer'se-Manual

Original Catalogue/Brochure/ Manufacturer'se-Manual containing general, Technical,Operational and Maintenance data to beprovided by the manufacturer along with theoffer and stores.

Any Other To be mentioned, [Any otherItems/accessories not mentioned above butrequire for full range operation/use of theoffered Fuze Extractor to be mentioned andmust be supplied with the Fuze Extractor').

l

I

*

DGDP - Civil · 2018. 10. 30. · 06. 06.0000.221 .Re-eval. 1 8 FOR OFFICIAL USE ONLY Directorate...

Documents

Transcript of DGDP - Civil · 2018. 10. 30. · 06. 06.0000.221 .Re-eval. 1 8 FOR OFFICIAL USE ONLY Directorate...