DFIM - Design for Innovation in Manufacturing - crib sheet
1
7/8/2012 The Strategy + Innovation Group | All Rights Reserved - Copyright (c) 1 Customer Requirements, Data Standards e-CAD data input CAM / DFM s/w package Run Design for Manufacturability Analysis and review results Do manufacturability issues exist? Document Issues in the DFM report Use principles to Identify viable solutions Yes No Prototype New Component solutions for ES Build ES Prototypes (w/ Mfg. Eng. at build) Identify Contradictions Check DFM violations against customer Product cost and Performance requirements Low Risk Med & High Risk Review Manufacturing Performance (w/ mfg floor feedback) Legend: ES = Engineering System CAM = Computer Automated Manufacturing DFM = Design for Manufacturability Release Product for High Volume Mfg DFM Tool as a Virtual Prototyping Tool Continue NPI Builds for Statistical significance Root cause for low yield High Yield Trends of ES Evolution Analysis S-Curve Analysis Low Yield Problem solved with standard Engineering approach No Yes DfIM Flow All Rights Reserved – The Strategy + Innovation Group
-
Upload
richard-platt -
Category
Engineering
-
view
427 -
download
5
description
a one page crib sheet of the Design for Innovation in Manufacturing, known as DFIM
Transcript of DFIM - Design for Innovation in Manufacturing - crib sheet
7/8/2012 The Strategy + Innovation Group | All Rights Reserved - Copyright (c) 1
Customer Requirements,
Data Standards
e-CAD data input
CAM / DFMs/w package
Run Design for Manufacturability
Analysis and review results
Do manufacturability
issues exist?
Document Issues in the DFM report
Use principles to Identify
viable solutions
Yes
No
Prototype New
Component solutions for ES
Build ES Prototypes(w/ Mfg. Eng.
at build)
Identify Contradictions
Check DFM violations
against customer Product cost and
Performancerequirements
Low
Risk
Med & High Risk
ReviewManufacturingPerformance
(w/ mfg floor feedback)
Legend: ES = Engineering SystemCAM = Computer Automated ManufacturingDFM = Design for Manufacturability
Release Product for
High Volume Mfg
DFM Tool as a Virtual Prototyping Tool
Continue NPIBuilds forStatistical
significance
Root cause for low yield
High
Yield
Trends of ES EvolutionAnalysis
S-CurveAnalysis
Low Yield
Problem solved with standard
Engineering approach
No
Yes
DfIM Flow
All R ights Reserved – The Strategy + Innovation Group
