DF11 Dry & Wet Riser Systems
-
Upload
ankush-nayar -
Category
Documents
-
view
216 -
download
0
Transcript of DF11 Dry & Wet Riser Systems
-
8/22/2019 DF11 Dry & Wet Riser Systems
1/2
d r y + w e t r i s e r s y s t e m s
Data Sheet File 11 Page 1 of 2
Boxes conform to BS 5041 Parts 4 and 5
1.5mm steel construction with 3mm thick architrave 38mm wide
Red dry powder coated finish. Other colours available
Lock and key and wired glass window fixed with glazing rubber
Boxes for foam inlets and single breechings available on request
f e a t u r e s
Dry/wet
Macron manufactures and supplies,
for installation by others, all necessarycomponents for dry and wet riser
systems.
The dry riser system is only charged
with water when in use, whereas the
wet riser system is permanently
connected to a water supply.
All components are manufactured strictly
to relevant British Standards. They can be
used in multi-storey buildings where a firefighting system should be available for
fire brigade use.
Dry riser landing valve boxDry riser landing valve box
Vertical breeching box
Wet riser landing valve box
Dry riser inlet box Horizontal breeching box for twin outlet
= =
400
610
690mm
460mm
210
540mm325
383
210
595mm
675mm
475mm
230
395mm 295mm
155
=
150
230
230
610mm
690mm
420mm
210
540mm
260mm=
395
=
=475mm
595mm
230
312
675mm
283
295
Inlet breechingOblique patternlanding valve
Horizontal patternlanding valve
Tyco Fire Suppression & Building Products, Burlingham House, Hewett Road, Gapton Hall Industrial Estate,
Great Yarmouth, Norfolk NR31 0NN, UK. Tel: +44 (0)1493 417600 Fax: +44 (0)1493 417700
E-mail: [email protected] Web: www.macron-safety.com
Datasheet Ref. MDF11 A1
l
o (http://www.verypdf.com)
This is trial versionIf you want get full version, please register it, thank you.
www.verypdf.como (http://www.verypdf.com)o (http://www.verypdf.com)
http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/ -
8/22/2019 DF11 Dry & Wet Riser Systems
2/2
d r y + w e t r i s e r s y s t e m s
Data Sheet File 11 Page 2 of 2
Dry riser system
An inlet breeching at ground level
provides the connection to the watersupply and can be installed in a
horizontal or vertical position. The
breeching has a 102mm (4 in)
screwed or flanged outlet and two
65mm (21/2 in) instantaneous male
inlets fitted with non-return valves and
drain valve as standard. It is housed in
a dry riser box, normally recessed into
the external wall of the building. Each
draw-off point from the dry riser is
fitted with a landing valve, situated in a
recess or cabinet. Manufacture is in
accordance with BS 5041 Part 2.
The valves have instantaneous
couplings to BS 336, for connection
to the fire-fighting hose.
The head of the dry riser should be
fitted with an air release valve which
ventilates pipework as water is
pumped in and closes automatically
by water pressure.
Wet riser system
This system is permanently
connected to the water supply.
Therefore inlet breeching and air
release valves are not required. Each
draw-off point requires a landing
valve, with either a rubber metal
seated valve. They are
manufactured in accordance with BS
5041 Part 1. The instantaneous
female outlet is to BS 336. Inletconnections may be screwed or
flanged as required.
Air release valve
Landing valve
100mm bore main pipe
Top Floor
First Floor
Ground Floor
Basement
Pipe bracket
Landing valve
Landing valve /landing valve box
A dry riser system
Dry riser landing valve box
External wall
Dry riser inlet breeching
Dry riser inlet boxwith glazed door
Flanged tee piece
25mm drain valve
Optional
Part No. Product10251 4 Way Dry Riser Inlet Breeching11016 2.5 Dry Riser Gate Valve
(inlet: 2.5 Female BSPT)10254 2.5 Dry Riser Gate Valve
(Flange: BS 4505 PN16)11165 2.5 Dry Riser Gate Valve
(Flange: BS10 Table D)
Part No. Product
10250 2 Way Dry Riser Inlet Breeching10246 2.5 Oblique Pattern Hydrant
Valve (Flange: BS10 Table D)11045 2.5 Oblique Pattern Hydrant
Valve (DN65 Flange: BS 4505 PN16)10247 2.5 Horizontal Pattern Hydrant
Valve
Tyco Fire Suppression & Building Products, Burlingham House, Hewett Road, Gapton Hall Industrial Estate,
Great Yarmouth, Norfolk NR31 0NN, UK. Tel: +44 (0)1493 417600 Fax: +44 (0)1493 417700
E-mail: [email protected] Web: www.macron-safety.com
Datasheet Ref. MDF11 A1
34
l
o (http://www.verypdf.com)
This is trial versionIf you want get full version, please register it, thank you.
www.verypdf.como (http://www.verypdf.com)o (http://www.verypdf.com)
http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/http://www.verypdf.com/