Deutsche Akkreditierungsstelle GmbH Annex to the ... · UL 61010-031:2007 Safety Requirements for...
Transcript of Deutsche Akkreditierungsstelle GmbH Annex to the ... · UL 61010-031:2007 Safety Requirements for...
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
1/21
Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D-PL-19327-01-02
according to DIN EN ISO/IEC 17025:2005
Period of validity: 18.04.2016 to 26.05.2019 Date of issue: 18.04.2016
Holder of certificate:
CSA Group Europe GmbH
Weismüllerstraße 45, 60314 Frankfurt am Main
Tests in the fields:
Safety electrical Appliances
Functional Safety
ATEX
The testing laboratory is permitted, without being required to inform and obtain prior approval
from DAkkS, to use standards or equivalent testing methods listed here with different issue dates.
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
electrical
equipment for
measurement,
control and
laboratory use
IEC 61010-1:2001
EN 61010-1:2001
Safety requirements for electrical equipment for
measurement, control and laboratory use -
Part 1: General requirements
DIN EN 61010-1:2002-08 Safety requirements for electrical equipment
for measurement, control and laboratory use -
Part 1: General requirements
CAN/CSA-C22.2 NO
61010-1-04
Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory Use -
Part 1: General Requirements - Second Edition
UL 61010-1:2004 Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory Use -
Part 1: General Requirements - Second Edition
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 2/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61010-2-010:2003
EN 61010-2-010:2003
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials
DIN EN 61010-2-010:
2004-06
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials
CAN/CSA-C22.2 NO.
61010-2-010-04
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials - Second
Edition
IEC 61010-2-020:2006
EN 61010-2-020:2006
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-020: Particular requirements for laboratory
centrifuges
DIN EN 61010-2-020:
2007-03
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-020: Particular requirements for laboratory
centrifuges
CAN/CSA-C22.2 NO
61010-2-020-09
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-020: Particular requirements for laboratory
centrifuges - Second Edition
IEC 61010-2-032:2002
EN 61010-2-032:2002
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-032: Particular requirements for hand-held and
hand-manipulated current sensors for electrical
test and measurement
DIN EN 61010-2-032:
2003-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-032: Particular requirements for hand-held and
hand manipulated current sensors for electrical
test and measurement
CAN/CSA-C22.2 NO.
61010-2-032-04
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-032:Particular requirements for hand-held and
hand-manipulated current sensors for electrical
test and measurement - Second Edition
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 3/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61010-2-040:2005
EN 61010-2-040:2005
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-040: Particular requirements for sterilizers and
washer-disinfectors used to treat medical
materials
DIN EN 61010-2-040:
2006-02
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-040: Particular requirements for sterilizers and
washer-disinfectors used to treat medical
materials
CAN/CSA-C22.2 NO
61010-2-040-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-040: Particular requirements for sterilizers and
washer-disinfectors used to treat medical
materials - First Edition
IEC 61010-2-051:2005
EN 61010-2-051:2005
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-051: Particular requirements for laboratory
equipment for mixing and stirring
DIN EN 61010-2-051:
2004-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-051: Particular requirements for laboratory
equipment for mixing and stirring
CAN/CSA-C22.2 NO.
61010-2-051-04
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-051: Particular requirements for laboratory
equipment for mixing and stirring - Second
Edition
IEC 61010-2-061:2005
EN 61010-2-061:2005
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-061: Particular requirements for laboratory
atomic spectrometers with thermal atomization
and ionization
DIN EN 61010-2-061:
2004-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-061: Particular requirements for laboratory
atomic spectrometers with thermal atomization
and ionization
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 4/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
CAN/CSA-C22.2 NO.
61010-2-061-04
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-061: Particular requirements for laboratory
atomic spectrometers with thermal atomization
and ionization - Second Edition
IEC 61010-2-081:2001
IEC 61010-2-081/A1:2003
EN 61010-2-81:2002
EN 61010-2-081/A1:2003
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-081: Particular requirements for automatic and
semi-automatic laboratory equipment for
analysis and other purposes
DIN EN 61010-2-081:
2004-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-081: Particular requirements for automatic and
semi-automatic laboratory equipment for analysis
and other purposes
CAN/CSA-C22.2 NO.
61010-2-081-04
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory use - Part
2-081: Particular Requirements for Automatic
and Semi-Automatic Laboratory Equipment for
Analysis and Other Purposes (Adopted CEI/IEC
61010-2-081:2001, first edition, 2001-12,
including Amendment 1:2003)
IEC 61010-2-101:2002
EN 61010-2-101:2002
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-101: Particular requirements for in vitro
diagnostic (IVD) medical equipment
DIN EN 61010-2-101:
2003-09
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-101: Particular requirements for in vitro
diagnostic (IVD) medical equipment
CAN/CSA-C22.2 NO.
61010-2-101-04
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-101: Particular requirements for in vitro
diagnostic (IVD) medical equipment - First Edition
IEC 61010-031:2001
IEC 61010-031/ A1:2008
EN 61010-031:2001
EN 61010-031/ A1:2008
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 5/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
DIN EN 61010-031:
2008-08
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
CAN/CSA-C22.2 NO
61010-031-07
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials - Second
Edition
CAN/CSA-C22.2 NO
61010-031-07 AMD 1
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
031: Safety requirements for hand-held probe
assemblies for electrical measurement and test -
First Edition
UL 61010-031:2007 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use - Part
031: Safety requirements for hand-held probe
assemblies for electrical measurement and test-
First Edition
IEC 61010-1:2010
EN 61010-1:2010
Safety requirements for electrical equipment for
measurement, control and laboratory use -
Part 1: General requirements
DIN EN 61010-1:
2011-07
Safety requirements for electrical equipment for
measurement, control and laboratory use -
Part 1: General requirements
CAN/CSA-C22.2 NO
61010-1-12
Safety requirements for electrical equipment for
measurement, control, and laboratory use -
Part 1: General requirements - Third Edition
UL 61010-1:2012 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use -
Part 1: General Requirements - Third Edition
IEC 61010-2-010:2014
EN 61010-2-010:2014
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials
DIN EN 61010-2-010:
2015-05
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of Materials
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 6/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
CAN/CSA-C22.2 NO.
61010-2-010-15
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-010: Particular requirements for laboratory
equipment for the heating of materials (Adopted
IEC 61010-2-010:2014, third edition, 2014-09,
with Canadian deviations)
IEC 61010-2-030:2010
EN 61010-2-030:2010
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-030: Particular requirements for testing and
measuring circuits
DIN EN 61010-2-30:
2011-07
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-030: Particular requirements for testing and
measuring circuits
CAN/CSA-C22.2 NO.
61010-2-030-12
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-030: Particular requirements for testing and
measuring circuits
IEC 61010-2-032:2012
EN 61010-2-032:2012
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-032: Particular requirements for hand-held and
hand-manipulated current sensors for electrical
test and measurement
DIN EN 61010-2-32:
2013-07
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-032: Particular requirements for hand-held and
hand-manipulated current sensors for electrical
test and measurement
CAN/CSA-C22.2 NO.
61010-2-032:14
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-032: Particular requirements for hand-held and
hand-manipulated current sensors for electrical
test and measurement (Adopted IEC 61010-2-
032:2012, edition 3.0:2012, with Canadian
deviations)
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 7/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61010-2-033:2012
EN 61010-2-033:2012
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-033: Particular requirements for hand-held
multimeters and other meters, for domestic and
professional use, capable of measuring mains
voltage
DIN EN 61010-2-33:
2012-11
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-033: Particular requirements for hand-held
multimeters and other meters, for domestic and
professional use, capable of measuring mains
voltage
CAN/CSA-C22.2 NO.
61010-2-033:14
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-033: Particular requirements for hand-held
multimeters and other meters, for domestic and
professional use, capable of measuring mains
voltage (Adopted IEC 61010-2-33:2012, edition
1.0:2012, with Canadian deviations)
IEC 61010-2-040:
2015-07
EN 61010-2-040:2015
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-040: Particular requirements for sterilizers and
washer-disinfectors used to treat medical
materials
IEC 61010-2-091:2012
EN 61010-2-091:2012
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-091: Particular requirements for cabinet X-ray
systems
IEC 61010-2-051:
2015-03
EN 61010-2-051:2015
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-051: Particular requirements for laboratory
equipment for mixing and stirring
IEC 61010-2-061:2015
EN 61010-2-061:2015
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-061: Particular requirements for laboratory
atomic spectrometers with thermal atomization
and ionization
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 8/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61010-2-081:
2015-01
EN 61010-2-81:2015
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-081: Particular requirements for automatic and
semi-automatic laboratory equipment for
analysis and other purposes
DIN EN 61010-2-081:
2015-11
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-081: Particular requirements for automatic and
semi-automatic laboratory equipment for analysis
and other purposes
DIN EN 61010-2-091:
2013-01
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-091: Particular requirements for cabinet X-ray
systems
CAN/CSA-C22.2 NO.
61010-2-091:14
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-091: Particular requirements for cabinet X-ray
systems (Adopted IEC 61010-2-091:2012, edition
1.0:2012, with Canadian deviations)
IEC 61010-2-101:
2015-01
EN 61010-2-101:2015
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
2-101: Particular requirements for in vitro
diagnostic (IVD) medical equipment
IEC 61010-2-201:2013
EN 61010-2-201:2013
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-201: Particular requirements for control equip-
ment
DIN EN 61010-2-201:
2014-01
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
2-201: Particular requirements for control equip-
ment
CAN/CSA-IEC 61010-2-
201-14
CAN/CSA-IEC 61010-2-201:14 - Safety require-
ments for electrical equipment for measure-
ment, control, and laboratory use - Part 2-201:
Particular requirements for control equipment
(Adopted IEC 61020-2-201:2013, first edition,
2013-02)
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 9/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
UL 61010A-1: 2002-01 UL Standard for Safety Electrical Equipment for
Laboratory Use; Part 1: General Requirements -
First Edition; Reprint with revisions through and
including December 6, 2002
IEC 61010-031:2015-05
EN 61010-031:2015
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part
031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
UL 61010B-1:2003-01 UL Standard for Safety Electrical Measuring and
Test Equipment; Part 1: General Requirements -
First Edition
UL 61010C-1:2002-08 UL Standard for Safety Process Control
Equipment - First Edition
UL 61010A-2-010 UL Standard for Safety Electrical Equipment for
Laboratory Use; Part 2: Particular Requirements
for Laboratory Equipment for the Heating of
Materials - First Edition
IEC 62304:2006
DIN EN 62304:2007-03
Medical device software - Software life cycle
processes
ANSI/AAMI/IEC 62304:2006
CAN/CSA-CEI/IEC 62304:14
Only applicable
for products
which are not
covered by the
Medical Device
Directive
IEC 62304:2006
DIN EN 62304
Berichtigung 1:2009-05
Medical device software - Software life cycle
processes
ANSI/AAMI/IEC 62304:2006
CAN/CSA-CEI/IEC 62304:14
Only applicable
for products
which are not
covered by the
Medical Device
Directive
IEC 62304 AMD 1:
2015-06
Medical device software - Software life cycle
processes
Only applicable
for products
which are not
covered by the
Medical Device
Directive
Household and
appliances
IEC 60335-1:2010-05
EN 60335-1:2012-10
Household and similar electrical appliances-
Safety-Part 1: General requirements
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 10/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 60335-2-6:2008-03
EN 60335-2-6:2013-06
Household and similar electrical appliances-
Safety-Part 2-6: Particular requirements for
stationary cooking ranges, hobs ovens and
similar appliances
IEC 60335-2-24:2010-02
EN 60335-2-24:2010-12
Household and similar electrical appliances-
Safety-Part 2-24: Particular requirements for
refrigerating appliances, ice cream appliances
and ice-makers
CSA-C22.2 NO. 60335-1-
11
Safety of Household and Similar Appliances -
Part 1: General Requirements - First Edition
IEC 60335-2-89:2010-02
EN 60335-2-89:2010-12
Household and similar electrical appliances-
Safety-Part 2-89: Particular requirements for
commercial refrigerating appliances with an
incorporated or remote refrigerant unit or
compressor
IEC 60730-1:2010-03 Automatic electrical controls for household and
similar use - Part 1: General requirements
IEC 60730-2-9:2011-06
EN 60730-2-9:2011-07
Automatic electrical controls for household and
similar use - Part 2-9: Particular requirements for
temperature sensing controls
IEC 60730-2-11:2006-10
EN 60730-2-11:2008-09
Automatic electrical controls for house-hold and
similar use - Part 2-11: Particular requirements
for energy regulators
CAN/CSA C22.2. No. 61:
2008
Household Cooking Ranges
CSA C22.2 No 63 1993 Household Refrigerators and Freezers
UL 250:1993 Household Refrigerators and Freezers
(bi-national standard CSA C22.2 no 63)
CSA C22.2 no. 60335-2-
24:2006
Safety Requirements for Household and Similar
Electrical Appliances, Part 2: Particular
Requirements for Refrigerating Appliances, Ice-
Cream Appliances and Ice-Makers. (tri-national
standard)
UL 427:2011 Refrigerating Units
UL 858:2005 Household Electric Ranges
UL 858A:2007 Solid State Controls for Household Electric
Ranges
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 11/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
UL 471: Tenth Edition
(with revisions through
and including June 28,
2013)
Commercial Refrigerators and Freezers
CSA C22.2 no 120: 2013 Refrigeration Equipment - Fourth Edition
UL 621:2010 Ice Cream Makers
UL 563: Eighth Edition
(with Revisions through
and Including September
30, 2011)
Ice Makers
UL 412: Fifth Edition
(with revisions through
and including September
17, 2013)
Refrigeration Unit Coolers
UL 541:2011 Refrigerated Vending Machines
UL 751: Eighth Edition
(with revisions through
and including August 17,
2012)
Vending Machines
CSA-C22.2 No. 128-95 Vending Machines
UL 399: Seventh Edition
(with revisions through
and including October
18, 2013)
Drinking-Water Coolers
UL 484: Eighth Edition
(with revisions through
and including August 3,
2012)
Room Air Conditioners
UL 1995: 2011 Heating and Cooling Equipment
CSA C22.2 no. 236: 2011 Heating and cooling equipment
CSA C22.2 no. 117:
Second Edition; General
Instruction No. 1:
February 1974
Room Air Conditioners
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 12/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
UL 207: Eighth Edition
(with revisions through
and including July 12,
2013)
Refrigerant-Containing Components and
Accessories, Nonelectrical
CSA C22.2 no. 140.3 Refrigerant-containing components for use in
electrical equipment
HAZLOC EN 1710:2005+
A1:2008
Equipment and components intended for use in
potentially explosive atmospheres in under-
ground mines
EN 1755:2000+
A2:2013
Safety of industrial trucks - Operation in
potentially explosive atmospheres - Use in
flammable gas, vapour, mist and dust
EN 1834-1:2000
Reciprocating internal combustion engines -
Safety requirements for design and construction
of engines for use in potentially explosive
atmospheres - Part 1: Group II engines for use in
flammable gas and vapour atmospheres
EN 1834-2:2000
Reciprocating internal combustion engines -
Safety requirements for design and construction
of engines for use in potentially explosive
atmospheres - Part 2: Group I engines for use in
underground workings susceptible to firedamp
and/or combustible dust
EN 1834-3:2000
Reciprocating internal combustion engines -
Safety requirements for design and construction
of engines for use in potentially explosive
atmospheres - Part 3: Group II engines for use in
flammable dust atmospheres
EN 12757-1:2005+
A1:2010
Mixing machinery for coating materials - Safety
requirements - Part 1: Mixing machinery for use
in vehicle refinishing
EN 13012:2012
Petrol filling stations - Construction and
performance of automatic nozzles for use on fuel
dispensers
EN 13463-1:2009 Non-electrical equipment for use in potentially
explosive atmospheres - Part 1: Basic method
and requirements
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 13/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 13463-2:2004 Non-electrical equipment for use in potentially
explosive atmospheres - Part 2: Protection by
flow restricting enclosure 'fr'
EN 13463-3:2005 Non-electrical equipment for use in potentially
explosive atmospheres - Part 3: Protection by
flameproof enclosure 'd'
EN 13463-5 :2011 Non-electrical equipment intended for use in
potentially explosive atmospheres - Part 5:
Protection by constructional safety 'c'
EN 13463-6:2005 Non-electrical equipment for use in potentially
explosive atmospheres - Part 6: Protection by
control of ignition source 'b'
EN 13463-8:2003 Non-electrical equipment for potentially
explosive atmospheres - Part 8: Protection by
liquid immersion 'k'
EN 13617-1:2012
Petrol filling stations - Part 1: Safety require-
ments for construction and performance of
metering pumps, dispensers and remote
pumping units
EN 13617-2:2012
Petrol filling stations - Part 2: Safety require-
ments for construction and performance of safe
breaks for use on metering pumps and
dispensers
EN 13617-3:2012
Petrol filling stations - Part 3: Safety require-
ments for construction and performance of shear
valves
EN 13617-4:2012
Petrol filling stations - Part 4: Safety require-
ments for construction and performance of
swivels for use on metering pumps and
dispensers
EN 13760:2003
Automotive LPG filling system for light and heavy
duty vehicles - Nozzle, test requirements and
dimensions
EN 14492-1:2006+
A1:2009/AC:2010
Cranes - Power driven winches and hoists -
Part 1: Power driven winches
EN 14492-2:2006+
A1:2009/AC:2010
Cranes - Power driven winches and hoists -
Part 2: Power driven hoists
EN 14678-1:2013
LPG equipment and accessories - Construction
and performance of LPG equipment for auto-
motive filling stations - Part 1: Dispensers
EN 14460:2006 Explosion resistant equipment
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 14/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 14756:2006
Determination of the limiting oxygen
concentration (LOC) for flammable gases and
vapours
EN 14973:2006+ A1:2008
Conveyor belts for use in underground
installations - Electrical and flammability safety
requirements
EN 14983:2007 Explosion prevention and protection in under-
ground mines - Equipment and protective
systems for firedamp drainage
EN 14986:2007 Design of fans working in potentially explosive
atmospheres
EN 15268:2008
Petrol filling stations - Safety requirements for
the construction of submersible pump
assemblies
EN 50104:2010
Electrical apparatus for the detection and
measurement of oxygen - Performance
requirements and test methods
EN 50176:2009 Stationary electrostatic application equipment
for ignitable liquid coating material - Safety
requirements
EN 50177:2009/ A1: 2012 Stationary electrostatic application equipment
for ignitable coating powders - Safety
requirements
EN 50223:2010 Stationary electrostatic application equipment
for ignitable flock material - Safety requirements
EN 50303:2000 Group I, Category M1 equipment intended to
remain functional in atmospheres endangered by
firedamp and/or coal dust
EN 50381:2004/AC:2005 Transportable ventilated rooms with or without
an internal source of release
EN 50495:2010 Safety devices required for the safe functioning
of equipment with respect to explosion risks
EN 60079-0:2012/
A11:2013
IEC 60079-0 Ed. 5.0 2007
IEC 60079-0 Ed. 6.0 2011
CAN CSA C22.2 no 60079-
0:11
ANSI/ISA 60079-0 Ed. 6
ANSI/UL 60079-0 Ed. 6
Explosive atmospheres - Part 0: Equipment -
General requirements
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 15/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 60079-1:2007
IEC 60079-1 Ed. 6.0 2007
IEC 60079-1 Ed. 7.0 2014
CAN CSA C22.2 no.
60079-1:11
ANSI/ISA 60079-1 Ed. 6
ANSI/UL 60079-1 Ed. 6
Explosive atmospheres - Part 1: Equipment
protection by flameproof enclosures "d"
EN 60079-2:2007
IEC 60079-2 Ed. 5 2007
IEC 60079-2 Ed. 6 2014
CAN CSA C22.2 no.
60079-2:12
ANSI/ISA 60079-2 2010
Explosive atmospheres - Part 2: Equipment
protection by pressurized enclosure "p"
EN 60079-5:2007
IEC 60079-5 Ed. 2 1995
IEC 60079-5 Ed. 3 2007
CAN CSA C22.2 no.
60079-5:11
ANSI/ISA 60079-5 Ed. 3
ANSI/UL 60079-5 Ed. 3
Explosive atmospheres - Part 5: Equipment
protection by powder filling "q"
EN 60079-6:2007
IEC 60079-6 Ed. 2 1995
IEC 60079-6 Ed. 3 2007
CAN CSA C22.2 no.
60079-6:11
ANSI/ISA 60079-6 Ed. 3
ANSI/UL 60079-6 Ed. 3
Explosive atmospheres - Part 6: Equipment
protection by oil immersion "o"
EN 60079-7:2007
IEC 60079-7 Ed. 3 2001
IEC 60079-7 Ed. 4 2006
CAN CSA C22.2 no.
60079-7 12
ANSI/ISA 60079-7 Ed. 4
ANSI/UL 60079-7 Ed. 4
Explosive atmospheres - Part 7: Equipment
protection by increased safety "e"
EN 60079-11:2012
IEC 60079-11 ED. 5 2005
IEC 60079-11 ED. 6 2011
CAN CSA C22.2 no.
60079-11:14
ANSI/ISA 60079-11 Ed.
6.2
ANSI/UL 60079-11 Ed. 6.2
Explosive atmospheres - Part 11: Equipment
protection by intrinsic safety "i"
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 16/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 60079-13: 2010
IEC 60079-13 Ed. 1 2010
Explosive atmospheres - Part 13: Equipment
protection by pressurized room “p”
EN 60079-15: 2010
IEC 60079-15 Ed. 3 2005
IEC 60079-15 Ed. 4 2010-
01
CAN CSA C22.2 no.
60079-15:12
ANSI/ISA 60079-15
Ed. 4
ANSI/UL 60079-15 Ed. 4
Explosive atmospheres - Part 15: Equipment
protection by type of protection "n"
EN 60079-18:2009
IEC 60079-18 Ed. 2 2004
IEC 60079-18 ED 3 2009
CAN CSA C22.2 no.
60079-18:12
ANSI/ISA 60079-18
Ed. 3
ANSI/UL 60079-18 Ed. 3
Explosive atmospheres - Part 18: Equipment
protection by encapsulation "m"
EN 60079-25:2010
/AC:2013
IEC 60079-25 ED. 1 2005
IEC 60079-25 ED. 2 2010
Explosive atmospheres - Part 25: Intrinsically safe
electrical systems
EN 60079-26:2007
IEC 60079-26 Ed. 1 2004
IEC 60079-26 Ed. 2 2006
ANSI/ISA 60079-26 2011
Explosive atmospheres - Part 26: Equipment with
equipment protection level (EPL) Ga
EN 60079-28:2007
IEC 60079-28 Ed. 1 2006-
08
ANSI/ISA 60079-28 Ed.
1.1
Explosive atmospheres - Part 28: Protection of
equipment and transmission systems using
optical radiation
EN 60079-30-1:2007
IEC 60079-30-1 Ed.1
2007-11
CAN CSA C22.2 no.
60079-30-1:14
Explosive atmospheres - Part 30-1: Electrical
resistance trace heating - General and testing
requirements
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 17/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 60079-31:2009
EN 60079-31:2014
IEC 60079-31 Ed.1 2008
IEC 60079-31 Ed. 2.0
2013
CAN CSA C22.2 no.
60079-31:12
Explosive atmospheres - Part 31: Equipment dust
ignition protection by enclosure "t"
EN 60079-35-1:2011/AC:
2011
IEC 60079-35-1 Ed. 1
2011
Explosive atmospheres Part 35-1: Caplights for
use in mines susceptible to firedamp - General
requirements - Construction and testing in
relation to the risk of explosion
CSA C22.2 no. 25 1966 Enclosures for Use in Class II Groups E, F, and G
Hazardous Locations
CSA C22.2 No. 30 M1986 Explosion-proof enclosures for use in class I
hazardous locations - Third Edition; General
Instruction No. 1: November 1986; General
Instruction No. 2: November 1988
CSA C22.2 No. 130-03 Requirements for Electrical Resistance Heating
Cables and Heating Device Sets
CSA C22.2 No. 145-11 Electric motors and generators for use in
hazardous (classified) locations
CSA C22.2 No. 157-92
Ed. 3
Intrinsically safe and non-incendive equipment or
use in hazardous locations
CSA C22.2 No. 159-
M1987
Attachment Plugs, Receptacles, and Similar
Wiring Devices for Use in Hazardous Locations:
Class I, Groups A, B, C, and D; Class II, Group G, in
Coal or Coke Dust, and in Gaseous Mines
CSA C22.2 No. 174-
M1984
Cables and Cable Glands for Use in Hazardous
Locations
CSA C22.2 No. 213-
M1987
Non-incendive electrical equipment for use in
class I, division 2 hazardous locations
ANSI/UL 674 2013 UL Standard for Safety Electric Motors and
Generators for Use in Hazardous (Classified)
Locations
ANSI/UL 823 2012 UL Standard for Safety Electric Heaters for Use in
Hazardous (Classified) Locations
ANSI/UL 844 2013 UL Standard for Safety Luminaires for Use in
Hazardous (Classified) Locations
ANSI/UL 913 2013
ANSI/UL 913 2006
ANSI/UL 913 1997
UL Standard for Safety Intrinsically Safe
Apparatus and Associated Apparatus for Use in
Class I, II, and III, Division 1, Hazardous
(Classified) Locations
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 18/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
ANSI/UL 1203 2013
UL Standard for Safety Explosion-Proof and Dust-
Ignition-Proof Electrical Equipment for Use in
Hazardous (Classified) Locations
FMRC 3600 - 1998 Electrical Equipment for Use in Hazardous
(Classified) Locations, General Requirements
FMRC 3610 - 2010 Intrinsically Safe Apparatus and Associated
Apparatus for Use in Class I, II & III, Division 1,
Hazardous (Classified) Locations
FMRC 3611 - 2004 Nonincendive Electrical Equipment for Use In
Class I and II, Div. 2 & Class III, Divisions 1 & 2
Hazardous (Classified) Locations
FMRC 3615 - 2006 Explosionproof Electrical Equipment, General
Requirements
FMRC 3616 - 2011 Dust-Ignitionproof Electrical Equipment General
Requirements
FMRC 3620 - 2014 Purged and Pressurized Electrical Equipment for
Hazardous (Classified) Locations
EN 1127-1:2011
Explosive atmospheres - Explosion prevention
and protection - Part 1: Basic concepts and
methodology
EN 1127-2:2014 Explosive atmospheres - Explosion prevention
and protection - Part 2: Basic concepts and
methodology for mining
EN 710:2005+A1:2008
Equipment and components intended for use in
potentially explosive atmospheres in
underground mines
EN 13237:2012
Potentially explosive atmospheres - Terms and
definitions for equipment and protective systems
intended for use in potentially explosive
atmospheres
EN 15198:2007
Methodology for the risk assessment of non-
electrical equipment and components for
intended use in potentially explosive
atmospheres
EN 60079-10-1:2010 Explosive atmospheres - Part 10-1: Classification
of areas - Explosive gas atmospheres
IEC 60079-10-1
Ed. 2008
Explosive atmospheres - Part 10-1: Classification
of areas - Explosive gas atmospheres
EN 60079-10-2:2010 Explosive atmospheres - Part 10-2: Classification
of areas - Combustible dust atmospheres
IEC 60079-10-2
Ed. 2009
Explosive atmospheres - Part 10-2: Classification
of areas - Combustible dust atmospheres
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 19/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
EN 60079-14:2014 Explosive atmospheres - Part 14: Electrical
installations design, selection and erection
IEC 60079-14
Ed. 2014
Explosive atmospheres - Part 14: Electrical
installations design, selection and erection
EN 60079-17:2007 Explosive atmospheres - Part 17: Electrical
installations inspection and maintenance
IEC 60079-17
Ed. 2007
Explosive atmospheres - Part 17: Electrical
installations inspection and maintenance
EN 60079-19:2011 Explosive atmospheres - Part 19: Equipment
repair, overhaul and reclamation
IEC 60079-19
Ed. 2010
Explosive atmospheres - Part 19: Equipment
repair, overhaul and reclamation
CAN/CSA-C22.2 No.
60529:05
EN 60529:2002
IEC 60529 2013 Ed. 2.2
Degrees of protection provided by enclosures (IP
Code)
NEMA 250
CAN/CSA C22.2 No.
94.1-07
CAN/CSA C22.2 No.
94.2-07
UL 50 2012
UL 50E 2012
Enclosures for Electrical Equipment (1000 Volts
Maximum)
Functional safety (only in conjunction with the product standards listed in the Scope)
Product safety IEC 61508‐1:2010
EN 61508‐1:2010
DIN EN 61508‐1:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 1: General requirements
IEC 61508‐2 2010
EN 61508‐2:2010
DIN EN 61508‐2:2010
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 2: Requirements for electrical/ electronic/
programmable electronic safety-related systems
IEC 61508‐3 :2010
EN 61508‐3:2010
DIN EN 61508‐3:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 3: Software requirements
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 20/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61508‐4:2010
EN 61508‐4:2010
DIN EN 61508‐4:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 4: Definitions and abbreviations
IEC 61508‐5:2010
EN 61508‐5:2010
DIN EN 61508‐5:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 5: Examples of methods for the deter-
mination of safety integrity levels
IEC 61508‐6:2010
EN 61508‐6:2010
DIN EN 61508‐6:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 6: Guidelines on the application of IEC
61508-2 and IEC 61508-3
IEC 61508‐7:2010
EN 61508‐7:2010
DIN EN 61508‐7:2011
Functional safety of electrical/electronic/ pro-
grammable electronic safety-related systems -
Part 7: Overview of techniques and measures
ISO 13849‐1:2006
EN ISO 13849‐1:2008
DIN EN ISO
13849-1:2008
Safety of machinery - Safety-related parts of
control systems - Part 1: General principles for
design
ISO 13849‐2:2012
EN ISO 13849-2:2012
DIN EN ISO 13849‐2:
2013
Safety of machinery - Safety-related parts of
control systems - Part 2: Validation
IEC 62061:2005+A1: 2012
EN 62061:2005+A1: 2013
DIN EN 62061:2013
Safety of machinery - Functional safety of safety-
related electrical, electronic and programmable
electronic control systems
IEC 61511‐1:2003‐12+
Corr. 2004
EN 61511‐1:2004
DIN EN 61511‐1:2005
Functional safety - Safety instrumented systems
for the process industry sector - Part 1: Frame-
work, definitions, system, hardware and soft-
ware requirements
IEC 61511‐2:2003
EN 61511‐2:2004
DIN EN 61511‐2:2005
Functional safety – Safety instrumented systems
for the process industry sector - Part 2: Guide-
lines for the application of IEC 61511-1
IEC 61511‐3:2003 +
Corr.2004‐10
EN 61511‐3:2004
DIN EN 61511‐3:2004
Functional safety - Safety instrumented systems
for the process industry sector - Part 3: Guidance
for the determination of the required safety
integrity levels
SN 29500 Part 1-14 Failure rates of components - expected values,
General
Annex to the accreditation certificate D-PL-19327-01-02
Period of validity: 18.04.2016 to 26.05.2019 - Translation - 21/21
Date of issue: 18.04.2016
Testing Field
Standard /
In-House Procedure /
Version
Title of Standard or In-House Procedure
(Deviations /
Modifications of Standard)
Test Range /
Restrictions
IEC 61800‐5‐2:2007
EN 61800‐5‐2:2007
DIN EN 61800‐5‐2: 2008
Adjustable speed electrical power drive
systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
Safety for
electronic
equipment
EN 50178:2004
DIN EN 50178:2004
Electronic equipment for use in power
installations
Only Functional
safety Unit
IEC 60950-1:2013
EN 60950-1:2013
DIN EN 60950-1:2013
Information technology equipment - Safety -
Part 1: General requirements
Only Functional
safety
IEC 60950-21:2002
EN 60950-21:2003
DIN EN 60950-21:2012
Information technology equipment - Safety -
Part 21: Remote power feeding
Only Functional
safety
IEC 60950-22:2005
EN 60950-22:2006
DIN EN 60950-22:2006
Information Technology Equipment - Safety -
Part 22: Equipment to be installed outdoors
Only Functional
safety
IEC 60947-1:2014
EN 60947-1:2014
DIN EN 60947-1:2014
Low-voltage switchgear and controlgear -
Part 1: General rules
Only Functional
safety
IEC 60947-5-2:2012
EN 60947-5-2:2012
DIN EN 60947-5-2: 2012
Low-voltage switchgear and controlgear -
Part 5-2: Control circuit devices and switching
elements - Proximity switches
Only Functional
safety
IEC 60947-5-5:2005
EN 60947-5-5:2005
DIN EN 60947-5-5: 2005
Low-voltage switchgear and controlgear -
Part 5-5: Control circuit devices and switching
elements - Electrical emergency stop device with
mechanical latching function
Only Functional
safety
Safety of
machinery
IEC 61496-1:2012
EN 61496-1:2013
DIN EN 61496-1:2014
Safety of machinery - Electro-sensitive protective
equipment - Part 1: General requirements and
tests
Only Functional
safety
IEC 61496-2:2013
EN 61496-2:2013
DIN EN 61496-2:2014
Safety of machinery - Electro-sensitive protective
equipment - Part 2: Particular requirements for
equipment using active opto-electronic
protective devices (AOPDs)
Only Functional
safety