Details RAN Capacity Indicators

November 30 – December 1, 2004MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service

names are the property of their respective owners. © Motorola, Inc. 2004.

Key RAN Capacity Indicators

Motorola System Engineering

& Deployment Team

May, 2005

November 30 – December 1, 2004 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service

names are the property of their respective owners. © Motorola, Inc. 2004. 2

Purpose & Goal

PurposeTo identify Motorola RAN capacity indicators that should be monitored periodically against their pre-defined Max limits

GoalsGives a snapshot of the various gauges on the Motorola RAN System to help in forecasting capacity needs and identifying any issues upfront before they reaching the Max Thresholds



Location of KCI Data

KCI data are available at various network elements in the Radio Access Network (RAN)

These can be grouped as follows: CBSC Level (MM/XC/SDU/VPU)

Core Network Level (AN/MGX)

Radio level (BTS)

O&M Level (OMCR/OMCIP)

Depending on the analysis or investigation to be conducted data from one or all of these levels may be required

Note: MSC and PDN KCI are not covered.



MOT Elements Providing KCI

AAA

OMCR

External IP Networks

Internal IP Networks

Other BSSANs

Packet BTS Packet BTS Circuit BTS

MSC

PSTNOMC-IP

SDUs

ANIP Switch

Scalable # of MGXs

CBSCMM CBS

C CBSCs

MM XC

XC

PDSN

VPUs

MM

Mixed BTS

CORE Network

RADIO Network

O&MCBSC



Key Capacity Indexes

CBSC (MM, SDU, VPU) VPU-VPF Utilization SDU-SDF Utilization SDU-PCF Utilization MM CPU Utilization MM ENET Card Capacity XC/VPU Loading XC Utilization SS7 Link Utilization PSI-CE Resource/CPU

Utilization

Core Network (AN) MLPPP Bundle Utilization RPM CPU Utilization RPM Port Availability

BTS Paging Channel Utilization Access Channel Utilization BTS Channel Element Utilization Packet Backhaul BTS Span

Utilization

OMCR Capacities and Limits

* Each of these Capacity indexes should be monitored as Peak and Average and appropriate forecasts generated based on a growth model



Capacity Dashboard



CBSC Capacity IndexesVPU-VPF Utilization

Description: VPU-VPF Utilization shows the average SAR utilization of the VPF card in the VPU High Utilization means the VPF is running out of capacity

Where is the data ?: Resrc Util % in VPU section of PMTRAF Reports PMTRAF is distributed as part of the SEPMR option for the UNO

platform PMTRAF daily reports are located in the UNO directory

/se_tools/SE/PM/reports/<OMC#>/*.trf

Threshold: min 1%, max 70%

Preventive/Corrective Action: Add a new shelf to the VPU frame



Example PMTRAF Report



CBSC Capacity IndexesSDU-SDF Utilization

Description: SDU-SDF Utilization shows the average SAR utilization of the SDF card in the SDU High Utilization means the SDF is running out of capacity

Where is the data ?: Resrc Util % in SDU-SDF section of PMDAT Reports PMDAT is distributed as part of the SEPMR option for the UNO

platform PMDAT daily reports are located in the UNO directory

/se_tools/SE/PM/reports/<OMC#>/*.dat

Threshold: min 1%, max 70%

Corrective Action: Add a new shelf to the SDU frame



Example PMDAT Report



CBSC Capacity IndexesSDU-PCF Utilization

Description: SDU-PCF Utilization shows the average SAR utilization of the PCF card in the SDU High Utilization means the PCF is running out of capacity

Where is the data ?: Resrc Util% in SDU-PCF section of PMDAT Reports PMDAT is distributed as part of the SEPMR option for the UNO

platform PMDAT daily reports are located in the UNO directory

/se_tools/SE/PM/reports/<OMC#>/*.dat

Threshold: min 0.5%, max 70%

Corrective Action: Add a new shelf to the SDU frame



CBSC Capacity IndexesMM CPU Utilization

Description: MM CPU Utilization shows the average SAR utilization of the MM CPU

Where is the data ?: SAR Files The sar files are on the OMCR in /sc/spool/xc_sar. They are named

sarDD where DD is the two-digit day of the month.

After 3 days, the files are compressed and retained for 2 weeks.

The format of the pipe-delimited ASCII sar file is:date|time|omc|mm/sdu/vpu|name|number|cage|slot|cpu busy%|

elapsed time|

Threshold: Max Utilization 70%

Corrective Action: Re-parenting of BTSs



Example SAR File

07/02/2003|00:00|1020||omc|1020|||8.00%|600.00|

07/02/2003|00:00|1020|10201|cbsc|1|||9.00%|600.00|

07/02/2003|00:00|1020|10201|OMP|1|0|20|4.91%|600.33|

07/02/2003|00:00|1020|10201|CPP|1|0|21|3.34%|600.16|

07/02/2003|00:00|1020|10201|CPP|2|0|22|7.64%|600.15|

07/02/2003|00:00|1020|10201|FEPR|1|0|25|3.38%|599.76|

07/02/2003|00:00|1020|10201|OMP|2|1|20|3.29%|600.36|

07/02/2003|00:00|1020|10201|CPP|3|1|21|3.89%|600.17|

07/02/2003|00:00|1020|10201|CPP|4|1|22|8.80%|600.15|

07/02/2003|00:00|1020|10201|FEP|5|1|24|6.37%|599.68|

07/02/2003|00:00|1020|10201|FEP|2|1|25|8.03%|599.75|



CBSC Capacity IndexesMM ENET Card Capacity

Description: The throughput in packets/sec that the ENET card is handling

Where is the data ?: Derived from PM pegs Pre_R16.5_Ethernet_PPS = moc/1800 * 16 + mof/1800 * 16 + mtc/1800 *

20.4 + mtf/1800 * 1 + reg/1800 * 3 + ho/1800 * 4.4 + sms/1800 * 1 R16.5_Ethernet_PPS = moc/1800 * 15 + mof/1800 * 15 + mtc/1800 * 20 +

mtf/1800 * 1 + reg/1800 * 3.4 + ho/1800 * 3.4 + sms/1800 * 1 The terms are the same as used in the MM_UTIL_PERIOD script in

SEPLUR package. The 1800 factor converts the ½-hour PM peg into events per second Ethernet_Util = PPS from above equation / 1900

Threshold: Max Utilization 70%Corrective Action:

Reparenting of BTSs

Example not provided, data derived from formula



CBSC Capacity IndexesXC/VPU Loading Rate

Description: The ratio of the designed Erlangs vs. the carried Erlangs

Where is the data ?: Load % in BBH Traffic Summary section of the PMTRAF Reports PMTRAF is distributed as part of the SEPMR option for the UNO

platform PMTRAF daily reports are located in the UNO directory

/se_tools/SE/PM/reports/<OMC#>/*.trf

Threshold: Planning limit 80% of provisioned spans

Corrective Action: Add additional XC/VPU spans




XCDR Busy Hr : 17 23 23 23 23XCDR Ter Ckts: 2568 0 0 0 0XCDR DE : 2465.9 0.0 0.0 0.0 0.0XCDR CE : 906.1 0.0 0.0 0.0 0.0XCDR Load% : 36.7 n/a n/a n/a n/a

XC+VPU BusyHr: 17 17 16 23 23XC+VPU CE : 906.1 954.1 928.7 0.0 0.0

VPU BBH Traffic Summary----------------------- VPU -> 103 102 101VPU Busy Hr : 23 17 17VPU Ter Ckts : 2700 2700 2700VPU DE : 2595.9 2595.9 2595.9VPU CE : 0.0 928.3 936.5VPU Load% : 0.0 35.7 36.1



CBSC Capacity IndexesXC Utilization

Description: Loading of the processes on the XC (CPP, OMP, FEP)

Where is the data ?: SAR Files The sar files are on the OMCR in /sc/spool/xc_sar. They are named sarDD

where DD is the two-digit day of the month. After 3 days, the files are compressed and retained for 2 weeks. The format of the pipe-delimited ASCII sar file is:

date|time|omc|mm/sdu/vpu|name|number|cage|slot|cpu busy%|elapsed time|


Corrective Action: Check Equippage of XC, H/w & Config If isolated to H/W, replace faulty card If running out of DSW ports, add additional XC/SDU/VPU



Example SAR File

07/02/2003|00:00|1020||omc|1020|||8.00%|600.00|

07/02/2003|00:00|1020|10201|cbsc|1|||9.00%|600.00|

07/02/2003|00:00|1020|10201|OMP|1|0|20|4.91%|600.33|

07/02/2003|00:00|1020|10201|CPP|1|0|21|3.34%|600.16|

07/02/2003|00:00|1020|10201|CPP|2|0|22|7.64%|600.15|

07/02/2003|00:00|1020|10201|FEPR|1|0|25|3.38%|599.76|

07/02/2003|00:00|1020|10201|OMP|2|1|20|3.29%|600.36|

07/02/2003|00:00|1020|10201|CPP|3|1|21|3.89%|600.17|

07/02/2003|00:00|1020|10201|CPP|4|1|22|8.80%|600.15|

07/02/2003|00:00|1020|10201|FEP|5|1|24|6.37%|599.68|

07/02/2003|00:00|1020|10201|FEP|2|1|25|8.03%|599.75|



CBSC Capacity IndexesSS7 Link Utilization

Description: SS7 Link Utilization

Where is the data ?: total_util for A+ Link (Uplink/Downlink) in SEPLUR Reports SEPLUR scripts are available on the UNO platform and provide real time

reports based on inputs used for the scriptsScripts Directory on UNO: /opt/UNO/utilization_scripts/bin/<release>/

Threshold: 40% Uplink Max 40% Downlink Max 80% Total Max

Corrective Action: Add additional SS7 spans Reparent BTSs



Example SEPLUR Reportsample output A+_UPLINK_UTIL_PERIOD UPLINK

date 04/20/2003 time 08:00 omcnum 1 cbscnum 202 links 3 apmode Compliant att 8256 moa 1770 mta 6486 cc 2734 moc 1726 mtc 1008 cf 5522 mof 44 mtf 5478 bs_svc_req 0 reg 22126 hho_src 6 hho_tgt 103 ho_perf 0 mwn_pch 49 mwn_tch 17 adds_xfer_ach 64 adds_dlvr_ack 446 adds_page_ack 58 ssd_upd_pch 0 ssd_upd_pch_ack 0 ssd_upd_tch 69

ssd_upd_tch_ack 69 uniq_chlg_pch_ack 0 uniq_chlg_tch_ack 7 voc_bypass_ack 0 moc_util 0.83503240740741 mof_util 0.01751851851852 mtc_util 0.36866666666667 mtf_util 0.00000000000000 s_svc_req_util 0.00000000000000 reg_util 4.71201851851852 hho_src_util 0.00195833333333 hho_tgt_util 0.01907407407407 ho_perf_util 0.00000000000000 mwn_pch_util 0.00499074074074 mwn_tch_util 0.00137731481481 adds_xfer_ach_util 0.00370370370370 adds_dlvr_ack_util 0.03613425925926 adds_page_ack_util 0.00845833333333 ssd_upd_pch_util 0.00000000000000 ssd_pch_ack_util 0.00000000000000 ssd_upd_tch_util 0.00814583333333 ssd_tch_ack_util 0.00766666666667 uniq_pch_ack_util 0.00000000000000 uniq_tch_ack_util 0.00056712962963 vocbypass_ack_util 0.00000000000000 total_util 6.02531250000000



Example SEPLUR Reportsample output A+_DNLINK_UTIL_PERIOD DOWNLINK

date 04/20/2003 time 08:00 omcnum 1 cbscnum 202 links 3 apmode Compliant att 8256 moa 1770 mta 6486 cc 2734 mtc 1008 moc 1726 cf 5522 mof 44 mtf 5478 bs_svc_resp 0 reg 22126 hho_src 6 hho_tgt 103 mwn_pch 49 mwn_tch 17 adds_dlvr 486 adds_page 110 ssd_upd_pch 0 ssd_upd_pch_ack 0

ssd_upd_tch 69 ssd_upd_tch_ack 69 uniq_chlg_pch 0 uniq_chlg_tch 7 voc_bypass 0 moc_util 0.53138425925926mof_util 0.01354629629630 mtc_util 0.45500000000000 mtf_util 0.78619444444444 bs_svc_resp_util 0.00000000000000 reg_util 1.99748611111111 hho_src_util 0.00152777777778 hho_tgt_util 0.02431944444444 mwn_pch_util 0.00998148148148 mwn_tch_util 0.01507175925926 adds_dlvr_util 0.03487500000000 adds_page_util 0.01578703703704 ssd_upd_pch_util 0.00000000000000 ssd_pch_ack_util 0.00000000000000 ssd_upd_tch_util 0.00942361111111 ssd_tch_ack_util 0.00878472222222 uniq_chlg_pch_util 0.00000000000000uniq_tch_util 0.00056712962963 voc_bypass_util 0.00000000000000 total_util 3.90394907407407



CBSC Capacity IndexesPSI-CE Resource/CPU Utilization

Description: PSI-CE Resource Utilization

Where is the data ?: PSI-CE Util % in PMDAT Reports PMDAT is distributed as part of the SEPMR option for the UNO

platform

PMDAT daily reports are located in the UNO directory /se_tools/SE/PM/reports/<OMC#>/*.dat

Threshold: 90% Utilization

Corrective Action: CBSC re-parenting

XC Cage Expansion



Capacity Dashboard



Core Network Capacity IndexesMLPPP Bundle Utilization

Description: MLPPP Bundle Utilization assists in: (on multi-span sites) Identifying when a span went down and lowers the effective bandwidth for a period of time. Trending and comparing BTS performance Identify anomalies and spikes in BTS performance Identify BTSs that are over or under utilized

Where is the data ?: Generated by the AN Dashboard Tool – Average PBH Util % and Max PBH Util % AN Dashboard Tool can be downloaded from:

http://cdma.gtss.mot.com/~reimrsrr/cgi/AN_dashboard/getDashboard.cgi AN Dashboard data is available in the following directory on the OMC-IP2 after the utility has been installed:

/usr/users/scadm/MOTOROLA/antools/data/an_dashboard By default the AN Dashboard stores 7 days of collected data and 180 days of generated reports. In order to prevent overlap between the reports, the MLPPP Bundle reports only include bundles that belong to BTSs configured with

multiple bundles.

Threshold: 70% UtilizationCorrective Action:

Adding a FRSM Card to the AGNODE Adding a New Access Network Adding a Packet Pipe Adding an AGNODE_SPAN Adding an RPM Card to the AGNODE Adding an Edge Router to the AG node where the procedure supports dual compression cards on the RPM Add/remove BTS 484 frame Adding a pBTS Span BTS re-parenting MLPPP bundle re-parenting Logical packet addition 2nd BTS router group Add AGNODE (BPR25)



Example Daily MLPPP Bundle Performance Report



Core Network Capacity IndexesRPM Utilization

Description: RPM Utilization assists in: Trending and comparing RPM utilization to assess market trends Identify anomalies and spikes in RPM performance Identify RPMs that are over-utilized or under-utilized to:

Predict RPM capacity growth Re-balancing RPM load.

Where is the data ?: Generated by the AN Dashboard Tool – Average CPU Utilization and Max CPU Utilization AN Dashboard Tool can be downloaded from:

http://cdma.gtss.mot.com/~reimrsrr/cgi/AN_dashboard/getDashboard.cgi AN Dashboard data is available in the following directory on the OMC-IP2 after the utility has been installed:

/usr/users/scadm/MOTOROLA/antools/data/an_dashboard By default the AN Dashboard stores 7 days of collected data and 180 days of generated reports.

Threshold: 80% Utilization

Corrective Action: Adding a FRSM Card to the AGNODE Adding a New Access Network Adding an RPM Card to the AGNODE Adding an Edge Router to the AG node where the procedure supports dual compression cards on the RPM Add/remove BTS 484 frame Adding a pBTS Span BTS re-parenting CBSC re-parenting MLPPP bundle re-parenting Logical packet addition 2nd BTS router group Add AGNODE (BPR25)



Example Daily RPM Performance Report



Core Network Capacity IndexesFRSM Port Availability

Description: Number of Router Ports on the RPM

Where is the data ?: CLI Command on OMCR DISPLAY AGNODE-#-# SPANCONF

Threshold: Max 100%

Corrective Action: Adding new FRSM Card to the AGNODE

Adding an AGNODE_SPAN

Add AGNODE (BPR25)

Re-parenting of BTSs to a Different AGNODE

Example not provided, data derived from CLI Command



Example CLI Command

Total number of ports is 8 per card

Ports available is (8 – Ports being used)

In the below example, 5 ports are assigned and 3 are available



Capacity Dashboard

# Capacity IndicatorMonitoring Pegs/scripts Scripts/Tools

List Specific Parameters(to monitor) Maximum Threshold

Preventive/Corrective actions to be taken.

13 Paging Channel utilization SEPLUR Reports provide real time data

SEPLUR SEPLUR Scripts Directory on UNO: /opt/UNO/utilization_scripts/bin/<release>/

max recommended util 70%

Add additional carrierModify paging strategyReparent BTS to new CBSCRedefine LAC Definitions

14 Access Channel utilization SEPLUR Reports provide real time data

SEPLUR SEPLUR Scripts Directory on UNO: /opt/UNO/utilization_scripts/bin/<release>/

max recommended util 70%

Configure more access channels

15 BTS Channel Element Utilization

PMTRAF PMTRAF Report BTS-CE Util %RF Load %

BTS-CE Util %RF Load %

Add more MCCCE cards to BTS's or Offload BTS with new BTS sites

16 Packet backhaul BTS Span Utilization

BTS BBH / Daily BTS report

AN DashBoard Max PBH Util Max aggregate limit 85% Add new span to BTS

17 Capacities and Limits Various Capacities and Limits

PMTRAF Reports and CLI Commands

PMTRAF reports are available on the UNO

See presentation Upgrade SUN PlatformReparent resources

1

BTS



BTS Capacity IndexesPaging Channel Utilization

Description: Paging Channel Utilization

Where is the data ?: total_util from PCH_UTIL script in SEPLUR SEPLUR scripts are available on the UNO platform and provide real time

reports based on inputs used for the scriptsScripts Directory on UNO: /opt/UNO/utilization_scripts/bin/<release>/


Corrective Action: Add additional carrier

Modify paging strategy

Reparent BTS to new CBSC

Redefine LAC Definitions



Example SEPLUR ReportPCH_UTIL Script

reg_util 0.01111111111111

cam_util 0.01388888888889

cam_retries_util 0.00000000000000

page_util 0.02000000000000

adds_page_util 0.00000000000000

bc_sms_page_util 0.00000000000000

mwn_pch_util 0.00000000000000

adds_xfer_util 0.00000000000000

upd_pch_util 0.00000000000000

upd_pch_ack_util 0.00000000000000

uniq_chlg_pch_util 0.00000000000000

uniq_pch_ack_util 0.00000000000000

base_util 10.9375000000000

total_util 10.9825000000000

date 01/19/2005time 10:00omc 1cbsc 9211bts 1651sector 1carrier 226baud 9600reg 5cam 5cam_retries 0page 18.0000000000000page_loss 0adds_page 0.00000000000000adds_page_loss 0bc_sms_page 0.00000000000000bc_sms_page_loss 0mwn_pch 0.00000000000000mwn_pch_loss 0adds_xfer 0ssd_upd_pch 0.00000000000000ssd_upd_pch_ack 0uniq_chlg_pch 0.00000000000000uniq_chlg_pch_ack 0



BTS Capacity IndexesAccess Channel Utilization

Description: Access Channel Utilization

Where is the data ?: total_util from ACC_UTIL script in SEPLUR SEPLUR scripts are available on the UNO platform and provide

real time reports based on inputs used for the scriptsScripts Directory on UNO:

/opt/UNO/utilization_scripts/bin/<release>/


Corrective Action: Replan paging strategy

Configure more access channels by adding additional carriers



Example SEPLUR ReportACC_UTIL Script

date 04/20/2003

time 12:30

omcnum 1

cbscnum 202

bts 496

sector 3

accs 3

probe 12.3333333333333

mop 6.33333333333333

mtp 6.00000000000000

reg 31.3333333333333

adds_page_ack 0.00000000000000

adds_xfer_ach 0.00000000000000

ssd_upd_pch_ack 0.00000000000000

uniq_chlg_pch_ack 0.00000000000000

probe_util 0.16444444444444

mop_util 0.08444444444444

mtp_util 0.08000000000000

reg_util 0.41777777777778

adds_page_ack_util 0.00000000000000

adds_xfer_ach_util 0.00000000000000

upd_pch_ack_util 0.00000000000000

chlg_pch_ack_util 0.00000000000000

total_util 0.58222222222222



BTS Capacity IndexesBTS Channel Element Utilization

Description: BTS Level Channel Element Utilization

Where is the data ?: Data is in the PMTRAF reports PMTRAF is distributed as part of the SEPMR option for the UNO platform

Threshold: BTS-CE Max Util 90% RF Load% Max 90%

Corrective Action: Add more MCCCE cards to BTS's Offload BTS with new BTS sites



Example SEPLUR ReportChannel Element Utilization

BBH TRAFFIC REPORT - 1X Carrier Groups - Carrier Set 1

Tot 1X w/1X

Car Traffic Usage Minutes Tot TCH Tot 1X 1X 1X All Reqd Reqd usage Carrier

MM BTS Grp # Tot 1X Pkt ICBSC CE BH Eqp DE Load% Load% Fail GOS% OE Busy TCH TCH TCH MCC List

----- ---- --- - ----- ----- ----- ----- ----- -- --- ----- ----- ----- ---- ---- ----- ----- ---- ---- ------- -------

6111 11 1 2 0 0 0 0 0.0 19 244 229.9 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1,2

6111 12 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 2

6111 13 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 2

6111 14 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 15 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 16 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 17 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 19 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 20 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 22 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1

6111 23 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 2

6111 24 1 1 0 0 0 0 0.0 19 119 106.4 0.0 0.0 0 0.0 0.0 0 1 1 0 0 1



Example SEPLUR ReportWC Utilization

BBH TRAFFIC REPORT - All Carriers - (2% GOS)

--------- WC Usage Minutes -------- RF WalshCode Pwr-Limit LPA-Ovrld

MM BTS S-C Total Voice 1XPkt Ckt 95Pkt ICBSC F BH WC Load% Atts Blks Blk% Ovf Ovf% Ovf Ovf% Frame Cnf

----- ---- ---- ----- ----- ----- ----- ----- ----- - -- -- ----- ----- ---- ---- ---- ---- ---- ---- ------------ ---

6111 11 1-1 155.7 148.9 1.2 0.0 0.0 0.0 . 18 61 6.3 595 0 0.0 0 0.0 0 0.0 - 3 P

6111 11 2-1 104.6 103.9 0.5 0.0 0.0 0.0 . 12 61 4.3 216 0 0.0 0 0.0 0 0.0 - 3 P

6111 11 3-1 201.7 188.2 4.6 0.0 0.0 0.0 . 21 61 8.2 625 0 0.0 0 0.0 0 0.0 - 3 P

6111 12 1-2 43.2 8.1 35.0 0.0 0.0 0.0 . 9 61 1.8 70 0 0.0 0 0.0 0 0.0 - 3 P

6111 12 2-2 27.5 27.5 0.0 0.0 0.0 0.0 . 20 61 1.1 62 0 0.0 0 0.0 0 0.0 - 3 P

6111 12 3-2 66.7 66.7 0.0 0.0 0.0 0.0 . 20 61 2.7 186 0 0.0 0 0.0 0 0.0 - 3 P

6111 13 1-2 153.5 30.6 122.8 0.0 0.0 0.0 . 6 61 6.2 77 0 0.0 0 0.0 0 0.0 - 3 P

6111 13 2-2 90.5 0.0 90.5 0.0 0.0 0.0 . 3 61 3.7 0 0 0.0 0 0.0 0 0.0 - 3 P

6111 13 3-2 26.0 25.9 0.0 0.0 0.0 0.0 . 10 61 1.1 8 0 0.0 0 0.0 0 0.0 - 3 P

6111 14 1-1 30.8 22.5 8.3 0.0 0.0 0.0 . 18 61 1.3 120 0 0.0 0 0.0 0 0.0 - 3 P

6111 14 2-1 31.3 22.5 8.7 0.0 0.0 0.0 . 20 61 1.3 65 0 0.0 0 0.0 0 0.0 - 3 P

6111 14 3-1 17.4 17.3 0.1 0.0 0.0 0.0 . 9 61 0.7 40 0 0.0 0 0.0 0 0.0 - 3 P

6111 15 1-1 201.3 118.6 82.6 0.0 0.0 0.0 . 10 61 8.2 185 0 0.0 0 0.0 0 0.0 - 3 P

6111 15 2-1 288.8 234.2 54.5 0.0 0.0 0.0 . 20 61 11.7 275 0 0.0 0 0.0 0 0.0 - 3 P

6111 15 3-1 437.7 342.3 93.9 0.0 0.0 0.0 . 19 61 17.8 712 0 0.0 0 0.0 0 0.0 - 3 P

6111 16 1-1 867.4 804.0 62.5 0.0 0.0 0.0 . 19 61 35.3 1217 0 0.0 0 0.0 0 0.0 - 3 P



OMCR Capacity IndexesCapacities and Limits

Description: Various capacities and limits come into play depending on the OMCR platform

Where is the data ?: PMTRAF Reports

PMTRAF is distributed as part of the SEPMR option for the UNO platform

PMTRAF daily reports are located in the UNO directory /se_tools/SE/PM/reports/<OMC#>/*.trf

CLI Commands

Threshold: See table

Corrective Action: Upgrade SUN Platform

Reparent resources



Summary

Key Capacity Indexes (KCIs) with thresholds and corrective actions identified for the Motorola RAN System

Ways of locating the data for the KCIs identified

Examples for KCIs provided

Each of these Capacity indexes should be monitored as Peak and Average and appropriate forecasts generate based on a growth model

Details RAN Capacity Indicators

Documents

Transcript of Details RAN Capacity Indicators