Detailed information

Special lubricants for cutting machine toolsProducing to plan.

your global specialist

2

Klüber speciality lubricants – always a good choice

Greases for the lubrication of spindle bearings

Oils for the lubrication of spindle bearings

Paste for the lubrication of clamping devices

Greases for the lubrication of gears in drilling and milling heads

Anticorrosion fluid for gears in drilling and milling heads

Greases for the lubrication of drive and guide systems

3

4

6

8

10

12

14

B064001002 / Edition 08.08, replaces 11.07-2

© Cover picture FORKARDT DEUTSCHLAND GmbH© Picture S. 2: FORKARDT DEUTSCHLAND GmbH

2

Klüber speciality lubricants – always a good choice

Greases for the lubrication of spindle bearings

Oils for the lubrication of spindle bearings

Paste for the lubrication of clamping devices

Greases for the lubrication of gears in drilling and milling heads

Anticorrosion fluid for gears in drilling and milling heads

Greases for the lubrication of drive and guide systems

3

4

6

8

10

12

14

B064001002 / Edition 08.08, replaces 11.07-2

© Cover picture FORKARDT DEUTSCHLAND GmbH

3

Klüber special lubricants – always a good choice

Quality put to the test

• Klüber has more than 110 test rigs, which include standardised equipment as well as tools Klüber has developed to regularly test the quality of its products.

• Test results prove the high quality level and provide you with a solid basis for selecting the right lubricant.

• You can obtain Klüber products of consistent quality made at our production plants worldwide.

All-around service

• Comprehensive consulting and technical support

• Development of plant lubrication charts

• Automatic lube point monitoring by means of Klüber Maintenance Software (KMS)

• Analysis of your used lubricants and components

• Tailor-made training for your staff

Benefit from experience

• Close cooperation with OEMs and operators since 1929

• Series supplier to many OEMs on all continents

• OEMs in all industries recommend Klüber lubricants for their components

• Alliances with partner companies for maximum user benefit

• The product range comprises oils, greases, pastes, waxes and bonded coatings, so the right lubricant for any application can be selected.

Time is money – we help to save you both by enabling

• Optimised processes

• Higher productivity

• Compliance with legal requirements and quality standards

• Reduction of maintenance times and repair costs

• Development partnerships giving you a head-start in innovation and differentiating yourself from the competition

Humans and the environment – what really counts

• Products that last a lifetime and enable minimum- quantity lubrication to be used help to save resources and reduce disposal quantities.

• Speciality lubricants optimised for higher efficiency reduce energy consumption and hence CO2 emission.

• Clean, safe products that are easy to handle are the fundamental criteria used in the lubricant development by the Klüber experts.

4

Application/ requirement

Speed factor 1) n x dm [min-1·mm], approx.

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Bearings in indirectly driven spindles

Spindle bearings with medium speeds

600 000 Synthetic hydrocarbon oil

Barium complex soap 3)

≤1 M/S 265 to 295 100 14.5 ISOFLEX TOPAS NB 152

004145 • Long component life due to high load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water, cooling lubricants and aging

Spindle bearings with high speeds

1 000 000 Ester oil / synthetic hy-drocarbon oil / mineral oil

Barium complex soap 3)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to high load-carrying capacity and corrosion protection.• For long-term or for-life lubrication due to good resistance to water and cooling lubricants as

well as good resistance to aging• Tried and tested for many years, especially in angular contact ball bearings• Numerous OEM recommendations

Spindle bearings with high to very high speeds

1 600 000 Ester oil / synthetic hydrocarbon oil

Special lithium soap

≤1 L 265 to 295 24 5 Klüberspeed BF 42-12

004048 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Dynamically light grease, especially for tapered roller bearings

Spindle bearings with very high speeds

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds

Spindle bearings with very high speeds

2 100 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 22 5 Klüberspeed BF 72-23

004246 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds• High consistency, particularly for vertical mounting positions

Spindle bearings with very high speeds

2 300 000 Ester oil Lithium soap ≤1 L/M 250 to 280 30 6 Klüberspeed BFP 42-32

004271 • Longer component life due to high corrosion protection• Long-term or for-life lubrication due to good water resistance• Meets increasing requirements in terms of speeds

Bearings in directly driven spindles

Spindle bearings of motor spindles or / and high temperatures

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 70 10 Klüberquiet BQ 74-73 N

094098 • Wideservicetemperaturerangeallowseasystartevenunderdifficultconditions• Longer component life due to good corrosion protection• Good resistance to water and aging for motor spindle bearings subject to elevated bearing

temperatures, long-term or for-life lubrication• High consistency, particularly for vertical mounting positions

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarried out by the user in each individual case.

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of spindle bearings

4

Application/ requirement

Speed factor 1) n x dm [min-1·mm], approx.

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Bearings in indirectly driven spindles

Spindle bearings with medium speeds

600 000 Synthetic hydrocarbon oil

Barium complex soap 3)

≤1 M/S 265 to 295 100 14.5 ISOFLEX TOPAS NB 152

004145 • Long component life due to high load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water, cooling lubricants and aging

Spindle bearings with high speeds

1 000 000 Ester oil / synthetic hy-drocarbon oil / mineral oil

Barium complex soap 3)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to high load-carrying capacity and corrosion protection.• For long-term or for-life lubrication due to good resistance to water and cooling lubricants as

well as good resistance to aging• Tried and tested for many years, especially in angular contact ball bearings• Numerous OEM recommendations

Spindle bearings with high to very high speeds

1 600 000 Ester oil / synthetic hydrocarbon oil

Special lithium soap

≤1 L 265 to 295 24 5 Klüberspeed BF 42-12

004048 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Dynamically light grease, especially for tapered roller bearings

Spindle bearings with very high speeds

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds

Spindle bearings with very high speeds

2 100 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 22 5 Klüberspeed BF 72-23

004246 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds• High consistency, particularly for vertical mounting positions

Spindle bearings with very high speeds

2 300 000 Ester oil Lithium soap ≤1 L/M 250 to 280 30 6 Klüberspeed BFP 42-32

004271 • Longer component life due to high corrosion protection• Long-term or for-life lubrication due to good water resistance• Meets increasing requirements in terms of speeds

Bearings in directly driven spindles

Spindle bearings of motor spindles or / and high temperatures

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 70 10 Klüberquiet BQ 74-73 N

094098 • Wideservicetemperaturerangeallowseasystartevenunderdifficultconditions• Longer component life due to good corrosion protection• Good resistance to water and aging for motor spindle bearings subject to elevated bearing

temperatures, long-term or for-life lubrication• High consistency, particularly for vertical mounting positions

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarried out by the user in each individual case.

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of spindle bearings

5

Application/ requirement

Speed factor 1) n x dm [min-1·mm], approx.

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Bearings in indirectly driven spindles

Spindle bearings with medium speeds

600 000 Synthetic hydrocarbon oil

Barium complex soap 3)

≤1 M/S 265 to 295 100 14.5 ISOFLEX TOPAS NB 152

004145 • Long component life due to high load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water, cooling lubricants and aging

Spindle bearings with high speeds

1 000 000 Ester oil / synthetic hy-drocarbon oil / mineral oil

Barium complex soap 3)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to high load-carrying capacity and corrosion protection.• For long-term or for-life lubrication due to good resistance to water and cooling lubricants as

well as good resistance to aging• Tried and tested for many years, especially in angular contact ball bearings• Numerous OEM recommendations

Spindle bearings with high to very high speeds

1 600 000 Ester oil / synthetic hydrocarbon oil

Special lithium soap

≤1 L 265 to 295 24 5 Klüberspeed BF 42-12

004048 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Dynamically light grease, especially for tapered roller bearings

Spindle bearings with very high speeds

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds

Spindle bearings with very high speeds

2 100 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 22 5 Klüberspeed BF 72-23

004246 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the bearing

• Good resistance to water and aging• Especially for angular contact ball bearings• Meets increasing requirements in terms of speeds• High consistency, particularly for vertical mounting positions

Spindle bearings with very high speeds

2 300 000 Ester oil Lithium soap ≤1 L/M 250 to 280 30 6 Klüberspeed BFP 42-32

004271 • Longer component life due to high corrosion protection• Long-term or for-life lubrication due to good water resistance• Meets increasing requirements in terms of speeds

Bearings in directly driven spindles

Spindle bearings of motor spindles or / and high temperatures

2 000 000 Ester oil / synthetic hydrocarbon oil

Polyurea ≤1 L/M 220 to 250 70 10 Klüberquiet BQ 74-73 N

094098 • Wideservicetemperaturerangeallowseasystartevenunderdifficultconditions• Longer component life due to good corrosion protection• Good resistance to water and aging for motor spindle bearings subject to elevated bearing

temperatures, long-term or for-life lubrication• High consistency, particularly for vertical mounting positions

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarried out by the user in each individual case.

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

6

Application / requirement

Speed factor 1)

n x dm [min-1·mm]Base oil Copper

corrosionDIN EN ISO 2160, 24h/100°C

ViscosityDIN 51562 [mm2/s] at 40°C, approx.

ViscosityDIN 51562 [mm2/s] at 100°C, approx.

Demulsifying abilityDIN 51599 (ASTM D-1401)54°C, 30 min. [ml]

Product Article number

Benefits

Spindle bearingsno data availableno data available

> 2 500 000

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 100

324668

6.08.010.5

no data availableno data availableno data available

CONSTANT OY 32 KOY 46 KOY 68 K

028101028102028103

• High corrosion protection capacity for long component life• Good load-carrying capacity ensures smooth running• Long component life due to lower steady-state temperature of bearing• Low lubricant costs due to good resistance to oxidation and aging• Lowchangeinviscositywithalternatingtemperaturesincreasesefficiency

Spindle bearingsno data availableno data availableno data availableno data available

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 1001 - 100

15324668

3.55.87.7

10.4

40/37/340/37/340/37/340/37/3

Klüber Summit HySyn FG 15 HySyn FG 32 HySyn FG 46HySyn FG 68

050039050013050014050015

• Lower risk potential for machine operators resulting out of incidental, technically unavoidable con-tact with oil vapors by the use of NSF H1 Food grade lubricant

• Good environmental compatibility due to low evaporation rate• Higher process stability, e.g. due to good foaming characteristic and demulsifying ability

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarriedout by the user in each individual case.For oil-injection cooling (oil cooling lubrication) there is no technical limit; therefore tests were performed up to a speed factor of 3 500 000.

Oils for the lubrication of spindle bearings

6

Application / requirement

Speed factor 1)

n x dm [min-1·mm]Base oil Copper

corrosionDIN EN ISO 2160, 24h/100°C

ViscosityDIN 51562 [mm2/s] at 40°C, approx.

ViscosityDIN 51562 [mm2/s] at 100°C, approx.

Demulsifying abilityDIN 51599 (ASTM D-1401)54°C, 30 min. [ml]

Product Article number

Benefits

Spindle bearingsno data availableno data available

> 2 500 000

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 100

324668

6.08.010.5

no data availableno data availableno data available

CONSTANT OY 32 KOY 46 KOY 68 K

028101028102028103

• High corrosion protection capacity for long component life• Good load-carrying capacity ensures smooth running• Long component life due to lower steady-state temperature of bearing• Low lubricant costs due to good resistance to oxidation and aging• Lowchangeinviscositywithalternatingtemperaturesincreasesefficiency

Spindle bearingsno data availableno data availableno data availableno data available

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 1001 - 100

15324668

3.55.87.7

10.4

40/37/340/37/340/37/340/37/3

Klüber Summit HySyn FG 15 HySyn FG 32 HySyn FG 46HySyn FG 68

050039050013050014050015

• Lower risk potential for machine operators resulting out of incidental, technically unavoidable con-tact with oil vapors by the use of NSF H1 Food grade lubricant

• Good environmental compatibility due to low evaporation rate• Higher process stability, e.g. due to good foaming characteristic and demulsifying ability

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarriedout by the user in each individual case.For oil-injection cooling (oil cooling lubrication) there is no technical limit; therefore tests were performed up to a speed factor of 3 500 000.

Oils for the lubrication of spindle bearings

7

Application / requirement

Speed factor 1)

n x dm [min-1·mm]Base oil Copper

corrosionDIN EN ISO 2160, 24h/100°C

ViscosityDIN 51562 [mm2/s] at 40°C, approx.

ViscosityDIN 51562 [mm2/s] at 100°C, approx.

Demulsifying abilityDIN 51599 (ASTM D-1401)54°C, 30 min. [ml]

Product Article number

Benefits

Spindle bearingsno data availableno data available

> 2 500 000

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 100

324668

6.08.010.5

no data availableno data availableno data available

CONSTANT OY 32 KOY 46 KOY 68 K

028101028102028103

• High corrosion protection capacity for long component life• Good load-carrying capacity ensures smooth running• Long component life due to lower steady-state temperature of bearing• Low lubricant costs due to good resistance to oxidation and aging• Lowchangeinviscositywithalternatingtemperaturesincreasesefficiency

Spindle bearingsno data availableno data availableno data availableno data available

Synthetic hydrocarbon oil 1 - 100

1 - 1001 - 1001 - 100

15324668

3.55.87.7

10.4

40/37/340/37/340/37/340/37/3

Klüber Summit HySyn FG 15 HySyn FG 32 HySyn FG 46HySyn FG 68

050039050013050014050015

• Lower risk potential for machine operators resulting out of incidental, technically unavoidable con-tact with oil vapors by the use of NSF H1 Food grade lubricant

• Good environmental compatibility due to low evaporation rate• Higher process stability, e.g. due to good foaming characteristic and demulsifying ability

1) Speedfactorsareguidevalueswhichdependonthetypeandsizeoftherollingbearingtypeandthelocaloperatingconditions,whichiswhytheyhavetobeconfirmedintestscarriedout by the user in each individual case.For oil-injection cooling (oil cooling lubrication) there is no technical limit; therefore tests were performed up to a speed factor of 3 500 000.

8

Application / requirement

Clamping force loss1) [%]

Base oil Thickener Solid lubri-cant

Four-ball wear test, welding load DIN 51350 pt. 04 [N]

Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Lubrication of clamping devices

< 15 Mineral oil

Barium complex soap 3)

inorganic > 4 000 ≤1 M/S 250 to 270 46 7 ALTEMP Q NB 50

005011 • Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product

• Good wear and corrosion protection help to reduce assembly forces and screw torques and prevent tribo- and fretting corrosion

• High pressure absorption capacity enables constant clamping forces and consequentlyensuresproperlyfixedtoolsorworkpieceinmachinetoolchucks

1) Clamping force block KSP 160, 6 bar, max. path feed rate 0.52 m/min. Quasi-stationary operation achieved at: -initial lubrication after approx. 500 clamping cycles -relubrication after approx. 200 clamping cycles

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Paste for the lubrication of clamping devices

8

Application / requirement

Clamping force loss1) [%]

Base oil Thickener Solid lubri-cant

Four-ball wear test, welding load DIN 51350 pt. 04 [N]

Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Lubrication of clamping devices

< 15 Mineral oil

Barium complex soap 3)

inorganic > 4 000 ≤1 M/S 250 to 270 46 7 ALTEMP Q NB 50

005011 • Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product

• Good wear and corrosion protection help to reduce assembly forces and screw torques and prevent tribo- and fretting corrosion

• High pressure absorption capacity enables constant clamping forces and consequentlyensuresproperlyfixedtoolsorworkpieceinmachinetoolchucks

1) Clamping force block KSP 160, 6 bar, max. path feed rate 0.52 m/min. Quasi-stationary operation achieved at: -initial lubrication after approx. 500 clamping cycles -relubrication after approx. 200 clamping cycles

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Paste for the lubrication of clamping devices

9

Application / requirement

Clamping force loss1) [%]

Base oil Thickener Solid lubri-cant

Four-ball wear test, welding load DIN 51350 pt. 04 [N]

Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 2)

Worked penetration DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits

Lubrication of clamping devices

< 15 Mineral oil

Barium complex soap 3)

inorganic > 4 000 ≤1 M/S 250 to 270 46 7 ALTEMP Q NB 50

005011 • Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product

• Good wear and corrosion protection help to reduce assembly forces and screw torques and prevent tribo- and fretting corrosion

• High pressure absorption capacity enables constant clamping forces and consequentlyensuresproperlyfixedtoolsorworkpieceinmachinetoolchucks

1) Clamping force block KSP 160, 6 bar, max. path feed rate 0.52 m/min. Quasi-stationary operation achieved at: -initial lubrication after approx. 500 clamping cycles -relubrication after approx. 200 clamping cycles

2) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

3) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

10

Application / requirement

Load- dependent max. circum-ferential speed in intermit-tent operation [m/s]

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 1)

Worked penetra-tion DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits Notes

Grease lubrication of gears in drilling and milling heads

< 4 Synthetic hydrocarbon oil / mineral oil

Special calcium soap / polyurea

≤1 EL/L 355 to 385 130 16 Klübersynth G 34-130

020501 • High protection against corrosion - especially tribocorrosion - long component life• Good resistance to water and aging, long-term lubrication• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“

Grease lubrication of gears in drilling and milling heads

< 8 Polyalkylene glycol

Lithium soap ≤1 EL 400 to 430 120 20 Klübersynth GE 46-1200

027035 • Longer component life due to good load-carrying capacity and wear protection (FZG > 12)

• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“or for spiral bevel (palloid) gears

Grease lubrication of gears in drilling and milling heads

< 20 Ester oil / synthetic hy-drocarbon oil/mineral oil

Barium complex soap 2)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to good load-carrying capacity• Good resistance to water and cooling lubricants• Long-term lubrication due to high aging stability• Tried and tested for many years

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 M 265 to 295 30 6 ISOFLEX TOPAS NB 52

004131 • Longer component life due to good load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 EL 385 to 415 30 6 ISOFLEX TOPAS NB 5051

004128 • Longer component life due to good corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability• Dynamically light grease for high accelerations

Particularly for ”fluidlubrication“orfor spiral bevel (pal-loid) gears

Grease lubrication of gears in drilling and milling heads

> 20 Ester oil / synthetic hy-drocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the gear

• Long-term lubrication due to good resistance to water and aging• Meets increasing requirements in terms of peripheral speed

As the gears of drilling and milling heads can be lubricated with the same grease as the spindle bearing, gear lubrication is an additional lubrication application of these products which maynotbeexplicitlymentionedintheproductinformationleaflet.1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease;

ES = extra heavy lubricating grease2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows:

It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of gears in drilling and milling heads

10

Application / requirement

Load- dependent max. circum-ferential speed in intermit-tent operation [m/s]

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 1)

Worked penetra-tion DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits Notes

Grease lubrication of gears in drilling and milling heads

< 4 Synthetic hydrocarbon oil / mineral oil

Special calcium soap / polyurea

≤1 EL/L 355 to 385 130 16 Klübersynth G 34-130

020501 • High protection against corrosion - especially tribocorrosion - long component life• Good resistance to water and aging, long-term lubrication• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“

Grease lubrication of gears in drilling and milling heads

< 8 Polyalkylene glycol

Lithium soap ≤1 EL 400 to 430 120 20 Klübersynth GE 46-1200

027035 • Longer component life due to good load-carrying capacity and wear protection (FZG > 12)

• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“or for spiral bevel (palloid) gears

Grease lubrication of gears in drilling and milling heads

< 20 Ester oil / synthetic hy-drocarbon oil/mineral oil

Barium complex soap 2)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to good load-carrying capacity• Good resistance to water and cooling lubricants• Long-term lubrication due to high aging stability• Tried and tested for many years

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 M 265 to 295 30 6 ISOFLEX TOPAS NB 52

004131 • Longer component life due to good load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 EL 385 to 415 30 6 ISOFLEX TOPAS NB 5051

004128 • Longer component life due to good corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability• Dynamically light grease for high accelerations

Particularly for ”fluidlubrication“orfor spiral bevel (pal-loid) gears

Grease lubrication of gears in drilling and milling heads

> 20 Ester oil / synthetic hy-drocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the gear

• Long-term lubrication due to good resistance to water and aging• Meets increasing requirements in terms of peripheral speed

As the gears of drilling and milling heads can be lubricated with the same grease as the spindle bearing, gear lubrication is an additional lubrication application of these products which maynotbeexplicitlymentionedintheproductinformationleaflet.1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease;

ES = extra heavy lubricating grease2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows:

It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of gears in drilling and milling heads

11

Application / requirement

Load- dependent max. circum-ferential speed in intermit-tent operation [m/s]

Base oil Thickener Corrosion protection (EMCOR test) DIN 51802

Apparent dynamic viscosity, Klüber viscosity grade 1)

Worked penetra-tion DIN ISO 2137 [0.1 mm]

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Product Article number

Benefits Notes

Grease lubrication of gears in drilling and milling heads

< 4 Synthetic hydrocarbon oil / mineral oil

Special calcium soap / polyurea

≤1 EL/L 355 to 385 130 16 Klübersynth G 34-130

020501 • High protection against corrosion - especially tribocorrosion - long component life• Good resistance to water and aging, long-term lubrication• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“

Grease lubrication of gears in drilling and milling heads

< 8 Polyalkylene glycol

Lithium soap ≤1 EL 400 to 430 120 20 Klübersynth GE 46-1200

027035 • Longer component life due to good load-carrying capacity and wear protection (FZG > 12)

• Low consistency allows application by means of automatic metering systems

Particularly for ”fluidlubrication“or for spiral bevel (palloid) gears

Grease lubrication of gears in drilling and milling heads

< 20 Ester oil / synthetic hy-drocarbon oil/mineral oil

Barium complex soap 2)

≤1 M 265 to 295 21 4.5 ISOFLEX NBU 15 004026 • Longer component life due to good load-carrying capacity• Good resistance to water and cooling lubricants• Long-term lubrication due to high aging stability• Tried and tested for many years

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 M 265 to 295 30 6 ISOFLEX TOPAS NB 52

004131 • Longer component life due to good load-carrying capacity and corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability

Grease lubrication of gears in drilling and milling heads

> 20 Synthetic hydrocarbon oil

Barium complex soap 2)

≤1 EL 385 to 415 30 6 ISOFLEX TOPAS NB 5051

004128 • Longer component life due to good corrosion protection• Long-term or for-life lubrication due to good resistance to water and cooling

lubricants as well as aging stability• Dynamically light grease for high accelerations

Particularly for ”fluidlubrication“orfor spiral bevel (pal-loid) gears

Grease lubrication of gears in drilling and milling heads

> 20 Ester oil / synthetic hy-drocarbon oil

Polyurea ≤1 L/M 250 to 280 22 5 Klüberspeed BF 72-22

004043 • Longer component life due to good corrosion protection, running-in properties and good grease distribution in the gear

• Long-term lubrication due to good resistance to water and aging• Meets increasing requirements in terms of peripheral speed

As the gears of drilling and milling heads can be lubricated with the same grease as the spindle bearing, gear lubrication is an additional lubrication application of these products which maynotbeexplicitlymentionedintheproductinformationleaflet.1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease;

ES = extra heavy lubricating grease2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows:

It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

12

Application / requirement

Corrosion protection properties of oils DIN ISO 7120, steel 24h/60°C

Base oil Thickener Product Article number

Benefits

Conservation and / or corrosion protection of gears in milling heads as well as other metal surfaces

no rust Synthetic hydrocarbon oil / mineral oil

Lithium soap Klübersynth BZ 44-4000 047076 • Longer component life due to good resistance to water and corrosion protection• Compatible with many lubricating greases• Increases the corrosion protection properties of lubricating greases

Anticorrosion fluid for gears in drilling and milling heads

12

Application / requirement

Corrosion protection properties of oils DIN ISO 7120, steel 24h/60°C

Base oil Thickener Product Article number

Benefits

Conservation and / or corrosion protection of gears in milling heads as well as other metal surfaces

no rust Synthetic hydrocarbon oil / mineral oil

Lithium soap Klübersynth BZ 44-4000 047076 • Longer component life due to good resistance to water and corrosion protection• Compatible with many lubricating greases• Increases the corrosion protection properties of lubricating greases

Anticorrosion fluid for gears in drilling and milling heads

13

Application / requirement

Corrosion protection properties of oils DIN ISO 7120, steel 24h/60°C

Base oil Thickener Product Article number

Benefits

Conservation and / or corrosion protection of gears in milling heads as well as other metal surfaces

no rust Synthetic hydrocarbon oil / mineral oil

Lithium soap Klübersynth BZ 44-4000 047076 • Longer component life due to good resistance to water and corrosion protection• Compatible with many lubricating greases• Increases the corrosion protection properties of lubricating greases

14

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via grease nipple / grease gun

Ester oil / synthetic hydrocarbon oil / mineral oil

Barium complex soap2)

> 60 265 to 295 M 21 4.5 ≤1 ISOFLEX NBU 15 004026 • Smoothrunningevenunderdifficultconditions,thereforelowerincrease of temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good resistance to water and cooling lubricants• Product streamlining because also suitable for spindle bearings, gears in drilling

and milling heads

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special calcium soap

15 - 60 265 to 295 no data available

100 12 no data available

Klüberplex BE 31-102 017135 • Very good long-term experience• Longer component life due to good wear protection and good media resistance• Longer service life due to good sealing effect and good adhesion

Initial lubricationor relubrication via grease nipple / grease gun

Synthetic hydrocarbon oil / mineral oil

Special calcium soap

15 - 60 265 to 295 L/M 130 16 ≤1 Klüberplex BEM 34-132 017141 • Longer component life due to very good tribocorrosion protection – even when exposed to micromotion

• Long relubrication intervals due to good wear protection• Long service life due to good media resistance

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special lithium soap

< 15 265 to 295 no data available

280 20 ≤1 MICROLUBE GL 262 020200 • Longer component life due to good protection against tribocorrosion• Long relubrication intervals due to good wear protection. Especially for high loads

or vibrations• Higher consistency than MICROLUBE GL 261, for vertical mounting positions

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of drive and guide systems

14

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via grease nipple / grease gun

Ester oil / synthetic hydrocarbon oil / mineral oil

Barium complex soap2)

> 60 265 to 295 M 21 4.5 ≤1 ISOFLEX NBU 15 004026 • Smoothrunningevenunderdifficultconditions,thereforelowerincrease of temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good resistance to water and cooling lubricants• Product streamlining because also suitable for spindle bearings, gears in drilling

and milling heads

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special calcium soap

15 - 60 265 to 295 no data available

100 12 no data available

Klüberplex BE 31-102 017135 • Very good long-term experience• Longer component life due to good wear protection and good media resistance• Longer service life due to good sealing effect and good adhesion

Initial lubricationor relubrication via grease nipple / grease gun

Synthetic hydrocarbon oil / mineral oil

Special calcium soap

15 - 60 265 to 295 L/M 130 16 ≤1 Klüberplex BEM 34-132 017141 • Longer component life due to very good tribocorrosion protection – even when exposed to micromotion

• Long relubrication intervals due to good wear protection• Long service life due to good media resistance

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special lithium soap

< 15 265 to 295 no data available

280 20 ≤1 MICROLUBE GL 262 020200 • Longer component life due to good protection against tribocorrosion• Long relubrication intervals due to good wear protection. Especially for high loads

or vibrations• Higher consistency than MICROLUBE GL 261, for vertical mounting positions

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

Greases for the lubrication of drive and guide systems

15

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via grease nipple / grease gun

Ester oil / synthetic hydrocarbon oil / mineral oil

Barium complex soap2)

> 60 265 to 295 M 21 4.5 ≤1 ISOFLEX NBU 15 004026 • Smoothrunningevenunderdifficultconditions,thereforelowerincrease of temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good resistance to water and cooling lubricants• Product streamlining because also suitable for spindle bearings, gears in drilling

and milling heads

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special calcium soap

15 - 60 265 to 295 no data available

100 12 no data available

Klüberplex BE 31-102 017135 • Very good long-term experience• Longer component life due to good wear protection and good media resistance• Longer service life due to good sealing effect and good adhesion

Initial lubricationor relubrication via grease nipple / grease gun

Synthetic hydrocarbon oil / mineral oil

Special calcium soap

15 - 60 265 to 295 L/M 130 16 ≤1 Klüberplex BEM 34-132 017141 • Longer component life due to very good tribocorrosion protection – even when exposed to micromotion

• Long relubrication intervals due to good wear protection• Long service life due to good media resistance

Initial lubricationor relubrication via grease nipple / grease gun

Mineral oil Special lithium soap

< 15 265 to 295 no data available

280 20 ≤1 MICROLUBE GL 262 020200 • Longer component life due to good protection against tribocorrosion• Long relubrication intervals due to good wear protection. Especially for high loads

or vibrations• Higher consistency than MICROLUBE GL 261, for vertical mounting positions

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

16

Greases for the lubrication of drive and guide systems

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap

< 15 310 to 340 L/M 290 20 ≤1 MICROLUBE GL 261 020195 • Longer component life due to very good protection against tribocorrosion• Long relubrication intervals due to good wear protection• Especially for high loads or vibrations

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap / silicate

< 15 355 to 385 no data available

590 (calculated)

31.5 (calculated)

no data available

MICROLUBE GB 0 020232 • Longer component life due to excellent protection against corrosion• Long relubrication intervals due to very good wear protection (Brugger frictional wear specificsurfacepressure>50N/mm2)

• Especially for high loads or micromotions

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil / mineral oil

Special lithium soap

15 - 60 310 to 340 L 130 14 ≤1 Klüberplex BEM 41-141 020320 • Longer component life due to good corrosion protection, even when exposed to vibrations

• Longer availability due to good corrosion protection• Longer service life due to good aging resistance

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil

Barium complex soap 2)

> 60 385 to 415 EL 30 6 ≤1 ISOFLEX TOPAS NB 5051 004128 • Smoothrunningevenunderdifficultconditions,thereforelowerincreaseof temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good adhesion and resistance to water and

cooling lubricants

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

16

Greases for the lubrication of drive and guide systems

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap

< 15 310 to 340 L/M 290 20 ≤1 MICROLUBE GL 261 020195 • Longer component life due to very good protection against tribocorrosion• Long relubrication intervals due to good wear protection• Especially for high loads or vibrations

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap / silicate

< 15 355 to 385 no data available

590 (calculated)

31.5 (calculated)

no data available

MICROLUBE GB 0 020232 • Longer component life due to excellent protection against corrosion• Long relubrication intervals due to very good wear protection (Brugger frictional wear specificsurfacepressure>50N/mm2)

• Especially for high loads or micromotions

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil / mineral oil

Special lithium soap

15 - 60 310 to 340 L 130 14 ≤1 Klüberplex BEM 41-141 020320 • Longer component life due to good corrosion protection, even when exposed to vibrations

• Longer availability due to good corrosion protection• Longer service life due to good aging resistance

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil

Barium complex soap 2)

> 60 385 to 415 EL 30 6 ≤1 ISOFLEX TOPAS NB 5051 004128 • Smoothrunningevenunderdifficultconditions,thereforelowerincreaseof temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good adhesion and resistance to water and

cooling lubricants

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

17

Application/ requirement

Base oil Thickener Linear speed [m/min]

Worked penetration DIN ISO 2137 [0.1 mm]

Apparent dynamic viscosity, Klüber viscosity grade 1)

Base oil viscosity DIN 51562 [mm2/s] at 40°C, approx.

Base oil viscosity DIN 51562 [mm2/s] at 100°C, approx.

Corrosion protection properties (EMCOR test) DIN 51802

Product Article number

Benefits

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap

< 15 310 to 340 L/M 290 20 ≤1 MICROLUBE GL 261 020195 • Longer component life due to very good protection against tribocorrosion• Long relubrication intervals due to good wear protection• Especially for high loads or vibrations

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Mineral oil Special lithium soap / silicate

< 15 355 to 385 no data available

590 (calculated)

31.5 (calculated)

no data available

MICROLUBE GB 0 020232 • Longer component life due to excellent protection against corrosion• Long relubrication intervals due to very good wear protection (Brugger frictional wear specificsurfacepressure>50N/mm2)

• Especially for high loads or micromotions

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil / mineral oil

Special lithium soap

15 - 60 310 to 340 L 130 14 ≤1 Klüberplex BEM 41-141 020320 • Longer component life due to good corrosion protection, even when exposed to vibrations

• Longer availability due to good corrosion protection• Longer service life due to good aging resistance

Initial lubricationor relubrication via central lubri-cation system / lubricant dispenser

Synthetic hydrocarbon oil

Barium complex soap 2)

> 60 385 to 415 EL 30 6 ≤1 ISOFLEX TOPAS NB 5051 004128 • Smoothrunningevenunderdifficultconditions,thereforelowerincreaseof temperature

• Longer component life due to good wear and corrosion protection• Longer service life due to good adhesion and resistance to water and

cooling lubricants

1) Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating grease

2) Upon thorough toxicological analysis, the European Chemicals Agency assessed the potential environmental risk of barium complex soaps as follows: It found that the barium complex soap used by Klüber does not pose a danger to human health and subsequently is not listed as declarable substance. It does not require any further REACH registration, as ELINCS substances automatically become ”REACH-registered substances“. Therefore, the barium complex soap used by Klüber continues to be a safe and reliable thickener.

18

Notes

18

Notes

19

Publisher and Copyright: Klüber Lubrication München KG Reprints, total or in part, are permitted only prior consulta-tion with Klüber Lubrication München KG and if source is indicated and voucher copy is forwarded. The data in this brochure is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with techni-cal experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this brochure at any time without notice. Klüber Lubrication München KG Geisenhausenerstraße 7 81379 München Germany Local first-instance court Munich, Germany Certificate of registration 46624

Publisher and Copyright: Klüber Lubrication München KG

Reprints, total or in part, are permitted only prior con-sultation with Klüber Lubrication München KG and if source is indicated and voucher copy is forwarded.

The data in this document is based on our general experience and knowledge at the time of publica-tion and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product proper-ties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant’s composition, the intended use and the application method. The technical values of lubricants change depending on the mechanical, dynamical, chemical and thermal loads, time and pressure. These changes may affect the function of a component. We recommend con-tacting us to discuss your specific application. If possible we will be pleased to provide a sample for testing on request. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this document at any time without notice.

Klüber Lubrication München KG Geisenhausenerstraße 7 81379 München Germany

Local first-instance court Munich, Germany Certificate of registration 46624

www.klueber.com

Klüber Lubrication – your global specialist

Innovative tribological solutions are our passion. Through personal contact and consultation, we help our customers to be successful worldwide, in all industries and markets. With our ambitious technical concepts and experienced, competent staff we have been fulfilling increasingly demanding requirements by manufacturing efficient high-performance lubricants for more than 80 years.