DESTROYIT® 3804Attractively priced Centralized shredder with ECC (Electronic

Capacity Control) and a super wide, 16 inch feed opening.

Shred bin holds 44 gallons.

Security level P-2 6 mm strip-cut (1/4 inch)

Sheet capacity: 29-31*

Security level P-4 4 x 40 mm cross-cut (3/16 x 1 1/2 inches)

Sheet capacity: 24-26*

Security level P-5 2 x 15 mm cross-cut (3/32 x 5/8 inches)

Sheet capacity: 12-14*

*Certified using 8 1/2" x 11" 20 lb. bond and recommended power supply.

Comprehensive SPS safety package: Easy Switch control element uses illuminated color codes and symbols to

indicate operational status and functions as an emergency stop switch; patented, electronically controlled,

transparent safety shield in the feed opening; automatic power cut-off when cabinet is opened or shred bin is

full; automatic reverse and power cut-off when overfed; double protection against overheating; Zero Energy

Consumption sleep mode cuts off power supply after 30 minutes of inactivity.

Automatic start and stop controlled by photo cell. Patented Electronic Capacity Control (ECC) indicator prevents

jams by monitoring sheet capacity levels during operation. High quality, hardened steel cutting shafts take

staples, paper clips, and credit cards (strip-cut and 4 x 40 cross-cut models take CDs / DVDs). Lifetime warranty

on the cutting shafts. Quiet and powerful single phase motor rated for continuous operation. Sturdy Twin Drive

System with fully enclosed gear box housing. High quality wooden cabinet mounted on casters. Convenient,

environmentally friendly shred bin does not require disposable shred bags.

Specifications

Shred volume, gallons 44

Feed opening, inches 16

Electrical requirements, volts 115

Maximum horsepower 1

Dimensions (D x W x H), inches 23 1/4 x 25 1/4 x 38 1/4

Shipping weight, pounds 232 (sc), 233 (cc) WWW.MBMCORP.COMTEL: 800-223-2508

WWW.IDEAL-MBM.COMTEL: 800-387-2528

max.

31sheets

v 16" w

All technical data is approximate and subject to change. © MBM Corporation, 3/2014.

DESTROYIT® 3804Features

SOLID STEEL CUTTING SHAFTSHigh grade, hardened steel cutting shaftsare milled in our Balingen factory andwarranted for life.

EASY SWITCHMultifunction control element uses opticalsignals to indicate operational status andfunctions as an emergency stop switch.

SAFE SHREDDING OF CDs / DVDsAn electronically controlled, transparentsafety shield protects the operator fromstray splinters of plastic.

ENVIRONMENTALLY FRIENDLY BINDurable, lightweight shred bins can beused with or without disposable bags.

CAPACITY INDICATORPatented Electronic Capacity Control(ECC) indicator monitors sheet capacitylevels during operation to prevent jams.

QUALITY COMPONENTSCabinet doors are equipped with highquality adjustable metal hinges.

1

1) Super micro-cut shafts are covered by a one-year warranty.