Dessceripton:eS:finaplSrarir pfiaSP CA - Frac Heads.pdf · 2. Remove production wellhead. 3....
Transcript of Dessceripton:eS:finaplSrarir pfiaSP CA - Frac Heads.pdf · 2. Remove production wellhead. 3....
AN OIL STATES INTERNATIONAL WELLSITE SERVICES COMPANY
WELLHEAD PROTECTION (CANADA) INC.
Frac Heads
Wellhead Isolation Specialists
Description:
Stinger Wellhead Protection’s frac heads are designed to replace the existing lower pressured production wellheads with higher rated multi valve wellheads during fracturing treatments.
Specifications:
Stinger offers two types of assemblies: the Special Pin Assembly and the Screw-on Assembly.
Available in full bore:
77.8 mm (3 1/16 in.) x 69 MPa (10,000 psi) or 103.5 MPa (15,000 psi) working pressure.
103.5 mm (4 1/16 in.) x 69 MPa (10,000 psi) or 103.5 MPa (15,000 psi) working pressure.
Special Pin Assembly
The special pin assembly adapts to both flush mount or extended neck tubing hangers. The bonnet incorporates a positive sealing system. The seals are energized and pressure tested to 69 MPa (10,000 psi) prior to the frac treatment. Running a back pressure valve or a tubing plug allows the special pin assembly to be safely installed and removed by a Stinger crane unit without the assistance of a service rig.
Screw-On Assembly
Screws directly on tubing after packer is set in tension. Can be flanged on to BOPs or tubing spool for multiple zone access. Available in various pipe connections (EUE, VAM, and Hydril).
AN OIL STATES INTERNATIONAL WELLSITE SERVICES COMPANY
WELLHEAD PROTECTION (CANADA) INC.
AN OIL STATES INTERNATIONAL WELLSITE SERVICES COMPANY
WELLHEAD PROTECTION (CANADA) INC.
RedDeer GrandePrairie MedicineHat (403)340-0716 (780)513-3696 (403)529-5921
www.stingerwellhead.com•[email protected]
Safety•Training•Innovation/Integrity•Neighbors•Guaranty/Generate•Empowerment•Respond
Features:
1. Various configurations built to customers needs/specs.
2. Special Pin eliminates protects tubing hanger threads.
3. Full bore access to accommodate packers, balls and other down hole tools.
4. Manufactured to API standards.
Installation and Removal
1. Without a service rig and without killing the well, install tubing plug or backpressure valve in tubing hanger.
2. Remove production wellhead.
3. Install special pin into the tubing hanger, install seal bonnet and frac head, torque to specs.
4. Pressure test adapter spool seals
5. Remove tubing plug or back pressure valve.
6. Reverse procedure to remove.
SEALS
PRESSURETESTPORTS
CAVITYVALVE
SPECIALPIN
WELLHEAD
Special Pin Assembly