Desk Organizer - media.prusaprinters.org · I needed a simple desk organizer. I looked around, but...
3
9 hrs 1 pcs f 0.20 mm k 0.40 mm h PLA 103 g d MK3/S Summary I needed a simple desk organizer. I looked around, but I didn't find any that looked like it would match the decor of my living room where our family computer desk is. So, I made my own. It's basically just a cup, with a wider tray base for stability and to provide a place for those odd things you need to keep handy at your desk. The outer edges of the tray have a smooth filet so that removing items–– especially coins and other flat things––are a cinch to just slide up and out. If you need to keep paperclips or other metal things handy, I have one version where one of the larger compartments in the tray is magnetized and has a slight depression to keep a pile of them. I've included a photo of the magnets I used if you can find the same ones, great. Otherwise, I've also included a STEP export of the Fusion 360 project in case you have a different size magnet. (Mine was 5.1mm x 5.6mm x 6.2mm, IIRC). I printed it in Prusement Galaxy Black and it looks pretty elegant on my desk. For the Fusion 360 archive, please visit: https://www.thingiverse.com/thing: 3624616. mkoistinen Desk Organizer VIEW IN BROWSER updated 12. 5. 2019 | published 12. 5. 2019
Transcript of Desk Organizer - media.prusaprinters.org · I needed a simple desk organizer. I looked around, but...
9 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
PLA
103 g
d
MK3/S
Summary
I needed a simple desk organizer. I looked around, but I didn't find any thatlooked like it would match the decor of my living room where our familycomputer desk is. So, I made my own. It's basically just a cup, with a widertray base for stability and to provide a place for those odd things you needto keep handy at your desk.
The outer edges of the tray have a smooth filet so that removing items––especially coins and other flat things––are a cinch to just slide up and out.
If you need to keep paperclips or other metal things handy, I have oneversion where one of the larger compartments in the tray is magnetizedand has a slight depression to keep a pile of them. I've included a photo ofthe magnets I used if you can find the same ones, great. Otherwise, I'vealso included a STEP export of the Fusion 360 project in case you have adifferent size magnet. (Mine was 5.1mm x 5.6mm x 6.2mm, IIRC).
I printed it in Prusement Galaxy Black and it looks pretty elegant on mydesk.
For the Fusion 360 archive, please visit: https://www.thingiverse.com/thing:3624616.
mkoistinen
Desk Organizer
VIEW IN BROWSER
updated 12. 5. 2019 | published 12. 5. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
22.0 MB
8.74 hrs f 0.20 mm k 0.40 mm h PLA 103.00 g d MK3/S
updated 12. 5. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
214.4 KBupdated 12. 5. 2019
1.0 MBupdated 12. 5. 2019
88.8 KBupdated 12. 5. 2019
Household > Office
deskorganizer pencilholder step pencilpot fusion360
No need for supports anywhere (provided it is printed right-side up). Theone pictured was printed a 0.2mm layer height and looks pretty great, butif you want the filets and the recessed paperclip area to be extra smooth,I'd recommend a 0.1mm layer height or thinner.
Find source .stl files on Thingiverse.com
desk-organizer2_02mm_pla_mk3s.gcode
desk-organizer.stl
desk-organizer-magnetized-area.stl
desk-organizer.step
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
