desigual
description
Transcript of desigual
Gear selection on this dossier is the result of years of common experiencie side by side to top supplier of World Class Audio and VideoLed, both fully analized ad-hoc for each store to reach precise parameter adjustment on every aspect and deliver premium sound and visuals. Audio gear layout is designed by our Engineering Team, using accoustic prediction software to stablish power amplifiers and speakers required, as well as position and orientation. Using this audio equipment, along with technical project and fully dedicated installation is the key to ensure optimal final result, reaching quality and sound intensity levels required by Desigual for stores. Parameters involved in fine tunning the whole audio system are part of the brand philosophy, the same applied to furniture and lighting aspects.
VideoLed systems fit size and resolution required by Desigual Marketing Dept. and Desigual Architecture Team in charge of the stores overall design, as well as the. Hardware reliability, as well as full integration of contents handled by Desigual are also highlights of the whole VideoLed system concept.
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
3
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
4.3A
8.0A
10.5A4341BTU/hr
2050BTU/hr
88x482x386.5mm
13kg
10kg
2x130W2x200W
-
400W
-
AB
NA 1000 s e r i e s
HZ
SMPTEIMD THD+N
RMS
2x130W 20Hz-20kHz 95dB
<0.5% <0.5% 10.5A
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
4
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
HZ
SMPTEIMD THD+N
RMS
2.8A
5.0A
8.0A2726BTU/hr.
2030BTU/hr.
88x482x386.5mm
13kg
10kg
2x200W2x300W
2x350W
550W
600W
AB
NA 2000 s e r i e s
HZ
SMPTEIMD THD+N
RMS
2x200W 20Hz-20kHz 95dB
<0.5% <0.5% 8.0A
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
5
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
4.3A
8.0A
10.5A4341BTU/hr
3250BTU/hr
88x482x386.5mm
19kg
15kg
2x350W2x500W
2x550W
550W
600W
AB
NA 3000 s e r i e s
HZ
SMPTEIMD THD+N
RMS
2x350W 20Hz-20kHz 95dB
<0.5% <0.5% 10.5A
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
6
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
HZ
SMPTEIMD THD+N
RMS
5.25A
11.5A
15.0A6300BTU/hr.
4750BTU/hr.
88x482x386.5mm
20kg
16kg
2x450W2x700W
2x750W
1400W
1500W
AB
NA 4000 s e r i e s
HZ
SMPTEIMD THD+N
RMS
2x200W 20Hz-20kHz 95dB
<0.5% <0.5% 15.0A
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
7
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
Type Active subwoofer
Speaker Unit 15”
Maximum Power Output 200W (4Ω / 80 Hz) THD=1%
Distortion <0.3%
S/N Ratio ≥ 90db
Frecuency Response 40Hz-150Hz
Sensitivity 300±10mV
Power supply AC230V 50Hz
Dimensions (W x D x H) 480 x 500 x580 mm
PSW-150HZ
SMPTEIMD THD+N
RMS
200W 40Hz-150kHz 90dB
1 %
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
8
Input Sensitivity (8Ω) 1V
Input Impedance 1 20kΩ/10kΩ
Noise and Humming 2 95dBDiaphony 2 ≥60dB
1/8 power Consumption 3
1/3 power Consumption 3
Maximum power Consumption 3
Thermal Emissions (1/8 power, 4Ω)
Thermal Emissions (1/3 power, 4Ω)
Dimensions (height x width x length)
Gross Weight
Net Weight
Warranty 1 year
RMS stereo Power8Ω
RMS stereo Power 4Ω
RMS stereo Power 2Ω
RMS bridge Power 8Ω
RMS bridge Power 4Ω
Low Pass Crossover (-6dB) 20Hz-120 Hz
High Pass Crossover (-6dB) 120Hz-20kHz
Frequency Response (±1dB) 20Hz-20kHz
THD+N(4Ω, 1kHZ) <0.5%SMPTE IMD (8Ω, 50 Hz & 7kHz) <0.5%Damping Factor (10-400 Hz, 8Ω) ≥300
Power 230V 50Hz-60Hz
Class
Power Frequency Range (4Ω, 1%THD+N) 20Hz - 20kHz (±1dB), -84dB/+0dB
TourClass Protection DC Protection, Shortcircuit, High Temperature, Overloading and Startup
Inputs (per channel) XLR female (pin 2+, pin 3+ customizable), TRS (tip+)
Outputs (per channel) Straight cable (2 ways) or speakon conectors
Cooling DC cooling - 2 speeds -, natural air cooling from front face to rear
Controls Volume, On/Off, Mode Selectors, Ground and Filter Selector
LED indicators per channel Active, Signal, Clip, Default
Casing Steel Carcass. Double layer to rack-up
1 : Balanced/Not Balanced 2 : A Ponderation, Maximum Power at 4Ω 3 : continuous playing, 220V/4Ω
HZ
SMPTEIMD THD+N
RMSNR 106Configuration (fullrange) Way 2
Recommended Amplifier Watts (RMS) 300
Long term power Watts 200
Short term power (IEC 268-5) Watts 400
Nominal impedance ohms 8
Configuration (bi-amp) Way 2
Recommended Amplifier Watts (rms) 200/50 (LF/HF)
Long term power Watts 100/25 (LF/HF)
Short term power (IEC 268-5) Watts 400/100 (LF/HF)
Nominal impedance ohms 8/8 (LF/HF)
Frequency response @ -6dB 65Hz - 18KHz
Low frequency woofer inch 6.5 - 1.5 voice coil
High frequency driver inch 1 - 1.4 voice coil
Sensitivity / full range (@1W/1m)dB 94
Sensitivity / bB-amp (@1W/1m)dB 94/105 (LF/HF)
Maximum SPL (full range) dB 120
Maximum SPL (Bi-amp) dB 120/125 (LF/HF)
Dispersion (rotatable) H x V 70° x 50°
Crossover frequency KHz 2,5
Recommended HP filter 55 Hz-24 db oct
Recommended External Controller Qube SP 22 D
Input connectors 2 Speakon NL-4
Net dimensions (WxHxD) cm 20x35x23,7 (7,87”x13,8”x9,33”)
Net weight Kg 7,5 (16,75 lbs.)
HZ
SMPTEIMD THD+N
RMS
200W 65Hz-18kHz 90dB
Specifications may change due to changes and improval both on design and manufacturing of our equipment.
NS 106/1
DISPLAY SPECIFICATIONSPixel Density (pixels/m2) Brightness (cd/m2)ContrastColor Temperature (K)White Balance (CIE coord. x-y)Viewing ModeGray Scale Processing (levels)ColorsBrightness Levels (manual / auto)Natural Light Brightness Adj. (levels)Scan Rate (Hz)Refresh Rate (Hz)Scan MethodCurrent DriveAverage Consumption (W/m2)Maximum Consumption (W/m2)Power Source (+10%)Power Source CertificationOperative Temperature (º C)Operative HumidityWaterproof 1
Maximum Signal Range 2
MaterialColorStandard Resolution1 : Front / Rear 2 : Network Cable (RJ45) / Optical Fiber
LED LAMP SPECIFICATIONSColor R G BQuantityShapeWave Length (nm)Brightness (mcd per lamp)Viewing Angle (horizontal axe)Viewing Angle (vertical axe)
LED MODULE SPECIFICATIONSPitch (mm)Real Resolution (pixels) 1
Virtual Resolution (pixels) 1
Module Dimensions (mm) 1
1 : width x height
CABINET SPECIFICATIONSModule Layout (modules) 1
Real Resolution (Pixels) 1
Virtual Resolution (Pixels) 1
Cabinet Dimensions (mm) 2
Cabinet Area (m2)Maximum Consumption (W)1 : width x height 2 : width x height x depth
F3 - 6 Indoor
62,500dots/m2
≥ 1800 nits
1,000:1
6500
1300
Real
>16,7 M
16.777.21
100
256 Manual/ 16 Auto
2000
≥600 Hz/s
1/4
Constant Current
500
1000
110/220V 50/60Hz
UL/CE/CCC
0 - 45º
<90% RH
IP30
100 m / 15 km
Stell
Black / Gray
1.280x1.024
1 1 1
smd
630 530 475
240 480 80
120 120 120
120 120 120
4 mm
4
2
192 x 192
3 x 3
4
2
575 x 576
0,3318
800