Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard,...
-
Upload
mary-norman -
Category
Documents
-
view
213 -
download
0
Transcript of Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard,...
![Page 1: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/1.jpg)
Designing Plastic Bottles to Designing Plastic Bottles to be Recyclable be Recyclable
APR Design for Recycling Guidelines APR Design for Recycling Guidelines
Keith Bechard, EntropexKeith Bechard, [email protected]@entropex.com
October 22nd, 2008
![Page 2: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/2.jpg)
Background
The Association of Postconsumer Plastic Recyclers, APR, is the trade association for
recycling used plastic bottle.
While APR offers information in good faith,
APR does not certify or guarantee recyclability.
![Page 3: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/3.jpg)
Plastics Bottle Recycling
• Two factors influencing recovery:
• Critical mass and • Compatibility.
![Page 4: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/4.jpg)
Plastics Bottle Recycling
• What to recycle?
• Focus on PET and HDPE bottles because of critical mass.
• Emerging Brand Owner and chemical industry interest to recover polypropylene (PP).
![Page 5: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/5.jpg)
Plastics Bottle Recycling
• Compatibility means:
• Minimal disruption of the recovery process and
• Minimal effect on the recycle product.
![Page 6: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/6.jpg)
Design for Recycling Program
Design Guidelines for Plastic Bottle Recycling
Written 1997;
updated 2003, 2006, and 2008
![Page 7: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/7.jpg)
Design for Recycling Program
Design Guidelines for Plastic Bottle Recycling
available at
plasticsrecycling.org
![Page 8: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/8.jpg)
PET-Color
• Transparent colors: • Green & light blue OK, • Others are generally undesirable. • Some reclaimers tolerate amber
bottles.
• Avoid translucent and opaque colors
![Page 9: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/9.jpg)
PET – PVC parts
• NO PVC closures; PVC closure liners; PVC labels (including shrink
labels); PVC sleeves (shrink sleeves) and PVC safety seals on PET bottles.
![Page 10: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/10.jpg)
PET – labels
• Only FLOATING labels, please• Paper labels undesirable • “See through” full body sleeve
for autosortation
![Page 11: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/11.jpg)
PET – closures
• All closures MUST float in water.
• PP closures preferred. (no ‘mineral filled’ PP, please)
![Page 12: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/12.jpg)
PET – inks and adhesives
• Adhesives release in hot water.
• No adhesive residue on PET • Avoid inks that bleed in hot
water
![Page 13: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/13.jpg)
PET – direct printing
• Only date coding, please.• No direct print label.
(less common today)
![Page 14: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/14.jpg)
PET – barrier layers, coatings, & additives-1
• Avoid additives that discolor and/or haze PET after remelting.
No yellowing, please
![Page 15: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/15.jpg)
PET – barrier layers, coatings, & additives-2
• Blends of PET and other resins are acceptable
if they are compatible with PET
recycling.
(few are)
![Page 16: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/16.jpg)
PET – barrier layers, coatings, & additives-3
• Non-PET layers and coatings are acceptable, if they are compatible with PET oreasily separate from PET in conventional recycling systems.
![Page 17: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/17.jpg)
PET – barrier layers, coatings, & additives-4
• EVOH, nylons, carbon, and silicon oxide barrier layers or coatings are currently tolerated provided
the layers/coatings readily separate and can be isolated or have been shown not to be a problem.
![Page 18: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/18.jpg)
PET - attachments
• Attachments discouraged;
• RFID’s on bottles discouraged. (Silver paint could be a health
problem)
![Page 19: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/19.jpg)
PET – recycled content
• Use postconsumerpostconsumer PET in bottles.
![Page 20: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/20.jpg)
Copolymer HDPE
• Non-HDPE components should be compatible with the base resin (copolymer HDPE)
or easily removed (sink in
water).
![Page 21: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/21.jpg)
Copolymer HDPE – closures & attachments
• HDPE preferred;• No PVC closures or closure
liners; • PP closures and attachments
at 5% or less of package weight;
• RFID’s on bottles discouraged.
![Page 22: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/22.jpg)
Copolymer HDPE – labels
• Paper labels are undesirable; • Shrink sleeve labels preferred,
no adhesive and• “See through” full body sleeve
for autosortation (opaque labels problematic)
![Page 23: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/23.jpg)
Copolymer HDPE – inks and adhesives
• “Hot melt” adhesives should readily separate from the
plastic and does not cause problems to the process or product.
![Page 24: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/24.jpg)
Copolymer HDPE -layers
• Avoid non-HDPE layers, unless they are compatible or easily separable
• Minimize EVOH or nylon layers.
![Page 25: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/25.jpg)
Copolymer HDPE -additives
• Limit additives, such as calcium carbonate, so the HDPE plastic still floats in water;
• (max CaCO3 under 3%).
![Page 26: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/26.jpg)
HDPE – natural and pigmented Recycled Content
• Use postconsumerpostconsumer HDPE in bottles.
![Page 27: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/27.jpg)
Polypropylene
• Any non-PP component of a bottle should be compatible with the base resin (PP) or removed efficiently in conventional separation systems.
![Page 28: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/28.jpg)
Polypropylene - color
• Unpigmented PP bottles are generally preferred.
![Page 29: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/29.jpg)
Polypropylene - attachments
• PVC is undesirable;• HDPE or LDPE attachments
should be less than 5% of the bottle weight
![Page 30: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/30.jpg)
PVC bottles
• PVC bottles are undesirable IF bottles are included with bales of PET or HDPE bottles.
![Page 31: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/31.jpg)
PVC bottles
• APR recommends the following:
Avoid PET attachments; Closures of polyolefin; Labels of PVC or polyolefin, not PET; No bleeding inks
![Page 32: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/32.jpg)
Other Resins
• For established infrastructure, bottles made from resins other than PET or HDPE will generally introduce contamination
• unless compatibility demonstrated or separation assured.
![Page 33: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/33.jpg)
Other Resins
• New bottle resins should follow the same general recycling guidelines established for other resin types.
![Page 34: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/34.jpg)
Other Resins
• Unpigmented bottles best;• PE or PP label and closures; • Compatible or readily
separable attachments, layers, and additives;
• Postconsumer content encouraged.
![Page 35: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/35.jpg)
Other ResinsTo be recycled as that resin, need
1. At least 50 M lbs collected (which has meant at least 200 M lbs in market);
2. Need uniform collected material;3. Need efficient recycling process and4. Need end market to offset recovery.
![Page 36: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/36.jpg)
Design for Recycling Program
Design Guidelines for Plastic Bottle Recycling
available at
plasticsrecycling.org
![Page 37: Designing Plastic Bottles to be Recyclable APR Design for Recycling Guidelines Keith Bechard, Entropex kbechard@entropex.com October 22nd, 2008.](https://reader035.fdocuments.in/reader035/viewer/2022062714/56649d025503460f949d5258/html5/thumbnails/37.jpg)
“Sustainable means recycling.Plastics recycling means APR”
www.plasticsrecycling.org