Designed with a unique Sleeve Index System to comply to ... · as well as the Spare Parts Repair...

VICTORIAUnit 4, 15 Lillee Crescent, Tullamarine, VIC 3043, AustraliaT: +61 3 9310 3980 | F: +61 3 9338 5547

QUEENSLAND30B McKechnie Drive, Brisbane Technology Park Eight Mile Plains, QLD 4113, AustraliaT: +61 7 3341 9500 | F: +61 7 3219 0305

NEW ZEALAND16 Hugo Johnston Drive, PO Box 12525, Penrose Auckland, New Zealand

+64 9 526 1880 | F: +64 9 580 0606 | Freecall: 0800 663 367

HEAD OFFICEUnit 37, Slough Business Park Holker Street, SilverwaterNSW 2128, Australia T: 1300 879 363 F: 1300 879 364 E: [email protected] www.escoindustries.com.au

BRANDS OF THE ESCO GROUP OF COMPANIES

®

ESCO INDUSTRIESBRAND IDENTITY GUIDELINES

PAGE 2 ©2011 CREATIVE APPROACH

THE LOGOAPPLICATIONThe logo should always be used in full.

The logotype should never be moved or adjusted. The logo-type has been created with specific letter spacing.

Always use approved artworkwhen reproducing the identity.

THE ESCO GROUP OF COMPANIES

























new cable management product group logo ideas

1. cmscable management solutions

msccable management solutions

2.







msc3.

cable management solutions

mcable management solutions

4.


5. mscESCO INDUSTRIESBRAND IDENTITY GUIDELINES







6. msc

medical gas fittings that simply work well.. Fully compliant to AS2896Unique Hose Sleeve Indexing System (standard) Simple Access to Serviceable Parts for ease of maintenance Solid Brass Body & SIS Indexing Ring ConstructionInstallation on either Medical Services Panels, Ducts, Pendants or Standard Wall PlatesAlso available in British Standard (BS) fittingsHoes, Connectors, Parts & Accessories plus much more..

®

Designed with a unique Sleeve Index System to comply to AS2896 Standards ESCO Medicon MG Series Gas Terminal Units are designed to accept SIS connectors

SIS MEDICAL GAS OUTLETS & WALL FITTINGS

Gas Terminal Fittings Specialty Gas Panels Medical Gas Panels Gas Hoses & AccessoriesREPRESENTED IN ALL CAPITAL CITIESNSW/ACT/VIC/TAS/SA/QLD/NT & WA (Freecall) T: 1300 879 363 to find your local ESCO Office or Representative

NEW ZEALAND16 Hugo Johnston Drive, PO Box 12525 Penrose Auckland, New ZealandT: +64 9 526 1880 I F: +64 9 580 0606

4

®

Medical Gas Terminal Units (SIS Type) - Spare Partsto carry out the following procedures it will be necessary to have some specific tools which are available as a set from ESCO - Catalogue number MGSKas well as the Spare Parts Repair Kit MGSK-2 TO CLEAN OUTLET AND REPLACE MAIN VALVE SEAL PROCEED AS FOLLOWSa. Remove threaded nipple assembly (item 2) by turning anti-clockwise using special 13mm socket spanner.b. On Oxygen, Air, Nitrous Oxide and Surgical Tool outlets secondary valve (item 6) will automatically cut off the gas supply. c. Purge the rubbish that may have accumulated in valve or supply pipeline by depressing the secondary valve (item 6) with a small probe. Caution - care should be taken during this operation to avoid eye damage d. Remove the main valve (item 3) from threaded nipple (item 2) and examine this ‘O’ring seal (item 4) for damage or deterioration. Note - it is fairly common after installation of a pipeline system for copper pipe filings to become embedded in this ‘O’ring which should be replaced to prevent leakage. e. After cleaning the valve seat, check ‘O’ring seal on nipple (item11) for any damage, then reassemble the unit.

(SIS Type) Suction Pump Operated Terminal Units - Spare Parts Anaesthetic Gas Cat Number MGOPGS (Scavenge Pump)While virtually no maintenance is required on this valve, disassembly of needle valve may be carried out as follows a. Needle Valve Inspectionb. Remove needle valve knob (item9) and retaining nut (item8). Unscrew needle valve (item7) and examine the ‘O’ring (item12) for damage or deterioration. c. Clean Valve of any foreign matter and reassemble.

Low Pressure Gas Hose Fittings also available (to suit any requirement)Specify Length, Gas Type & Connectors

MED

ICAL

GAS

OUTL

ETS

http://www.escoindustries.com.au


mailto:[email protected]


mailto:[email protected]


P5

Medical Air self sealing outlet Oxygen self sealing outletNitrous Oxide self sealing outletSurgical Tool self sealing outletPump Suction self sealing outletPump-Gas Scavenge outlet#Venturi Suction outlet#Venturi-Gas Scavenge outlet#Carbon Dioxide self sealing outlet#Entonox self sealing outlet#Carbogen self sealing outlet#Tourniquet outlet 3/8” BSP/F Connection#Clean Air Outlet 3/8” BSP/F connection & control valve#*Lab Gas Outlet 1/4” NPT/F connection#*Lab Gas Outlet 3/8” BSP/F connection & control valve* Gas type to be nominated# Valves made to order

MGOAMGOOMGONOMGOSTMGOPSMGOPGSMGOVSMGOVGSMGOCDMGOENTMGOCABMGOTQMGOCAVMGOLGMGOLGV

MEDICAL GAS TERMINAL UNITSSIS Type to AS2896

MGOO

MGOPGS

VENTURI OPERATED SUCTION & SCAVENGE TERMINAL UNITSThese comply with AS 2896 in respect to connection detailand performance. A feature of the unit is the driving gasfilter that is readily cleaned without removal of the mountingpanel or gas pressure. In the event of drainage fluids enteringthe outlet, the section requiring cleaning may be detachedfrom the incoming gas supply without having to shut off thissupply.

PANEL PUNCHING DETAIL

NOTE: Model MGOPGS Pump Gas Scavenge. This outlet, which is connected to a central vacuum pump system, complies with the connectionand performance requirements of AS 2896. The flow rate may be controlled by an inbuilt needle valve.

SELF SEALING MEDICAL GAS & SUCTION TERMINAL UNITSWith a sleeve index system complying with AS 2896,these outlets will accept SIS connectors.


Key IndexedAluminium Colour Codedouter clamp ring providessecure fixing to panel

Solid Brass Body andindexing sleeve

Maximum Panel Thickness - 2mm

Front Removable MainValve for fast and easyseal replacement

Side Entry Gas SupplyTube, positioned at 450

to suit multipleinstallations

Secondary Valve thatautomatically shuts offgas supply when mainvalve is removed

Low Profile Body (20mm)allows back-to-backinstallation in shallowdepth walls

TECHNICAL SPECIFICATIONS


Exhaust Tube Elbow to suit9.5mm bore flexible hose.May be rotated through 180 0

to suit installation

Key IndexedAluminium Colour CodedOuter Clamp Ring providessecure fixing to panel

Solid Brass Body andIndexing Sleeve

Front removable“Live” ElementAir Filter

Low Profile (24mm)Body, allows back-to-back installationin shallow depthwalls

Separate FlowControl Valve forease of maintenance

6.4mm dia. SideEntry Air Supply Tube

medicon medical systems

P5




MGOO

MGOPGS

























P5




MGOO

MGOPGS

























Unit 4, 15 Lillee Crescent, Tullamarine, VIC 3043, AustraliaT: +61 3 9310 3980 | F: +61 3 9338 5547

QUEENSLAND30B McKechnie Drive, Brisbane Technology Park Eight Mile Plains, QLD 4113, AustraliaT: +61 7 3341 9500 | F: +61 7 3219 0305

NEW ZEALAND16 Hugo Johnston Drive, PO Box 12525, Penrose Auckland, New Zealand

+64 9 526 1880 | F: +64 9 580 0606 | Freecall: 0800 663 367


PAGE 4

©2011 CREATIVE APPROACH

Logo variations

COLOUR LOGOSThe Pantone logo [A] is the

preferred and primary logo.

Use it whenever possible.If a coloured background is

used, make sure that there

is enough contrast for the logo

to remain clear.When the colour logo is re-

versed [B], it can only be used

on a dark background.BLACK AND WHITE LOGO

Solid black and solid white

version of the logo [C/D] are

available for use when a sec-

ond ink colour is not available.

A.

B.

C.

D.

ESCO Medicon is a internationally recognised market leader in the design and manufacture of Medical Gas Terminal fittings, Medical Services Panels and products for use in modern Healthcare, HospitalDay Surgeries, Doctors Rooms, Clinics and Veterinary Surgeries.

Standard Features for all SIS Fittings ESCO Medicon Gas Terminal Fittings comply with AS2896 in respect to connection detail and performance. A feature of each unit is the driving gas filter that is readily cleaned without removal of the mounting panel or gas pressure. In the event of drainage fluids entering the outlet, the section requiring cleaning may be detached from the incoming gas supply without having to shut off this supply.

• Unique Hose Sleeve Indexing System (SIS) to identify Gas Type accepting all SIS type Gas Connections, Hoses & Leads

• AS2896 compliant to meet exacting Medical Gas Requirements

• Simple Cleaning & Serviceability Procedure

• Spare Parts available for replacement (if required)

• Suits all SIS Hose Fittings & Connectors

• Available as individual outlets, or to suit Plates Medical Services Panels, Ducts & Pendants

• Proven use & specified all over the country

ESCO Medicon Gas Fittings are featured in almost all modern Hospitals and facilities across Australasia

Designed for either direct fitment either flush or surface via Wall Plates & Medical Service Panels or on a Medical Service Pendant

SIS MEDICAL GAS FITTINGS & OUTLETS®

Need to supply Medical Gases, Suction or Air to Equipment, Patients or Areas Securely…

www.escomedicon.com.au

choose the NEW Medicon Specialty Gas Outlets to suit all vital gas applications Meeting the demand and strict Medical Standards, ESCO Medicon Gas Outlets are ideal for all modern medical applications, facilities or needs. Specify them today. Medical Gas Outlet range which comply to AS2896 in respect to connection detail and performance includes the following..

MGOA Medical Air Self Sealing Outlet MGOO Oxygen Self Sealing OutletMGONO Nitrous Oxide Self Sealing Outlet MGOST Surgical Tool Self Sealing Outlet MGOPS Pump Suction Self Sealing Outlet MGOPGS Pump-Gas Scavenge OutletMGOVS Venturi Suction Outlet #MGOVGS Venturi-Gas Scavenge Outlet #MGOCD Carbon Dioxide Self Sealing Outlet # MGOENT Entonox Self Sealing Outlet # MGOCAB Carbogen Self Sealing Outlet # MGOTQ Tourniquet outlet 3/8” BSP/F Connection # MGOCAV Clean Air Outlet 3/8” BSP/F Connection & Control Valve MGOLG Lab Gas Outlet 1/4” NPT/F Connection # * MGOLGV Lab Gas Outlet 3/8” BSP/F Connection & Control Valve # * * Gas type to be nominated when ordering # Made to order only

P5




MGOO

MGOPGS

























Secondary Valve that automatically shuts off gas supply when main valve is removed

Low Profile Body (20mm) allows back-to-back installation in shallow depth walls

Side Entry Gas Supply Tube, positioned at 45º to suit multiple installations

Key Indexed Aluminium Colour Coded outer clamp ring provides secure fixing to panel

Solid Brass Body and indexing sleeve

Front Removable Main Valve for fast and easy seal replacement

Medical Gas Outlets fitted on Plastic Accessory Mounting Plates

Technical Specifications & Spare Parts Description

Spare Parts Identification Listing (see attached service detail notes - on rear)

Cross Sectional Image

Panel Punching Detail - SIS OutletMaximum Panel Thickness - 2mm

MGOO

Clinical Teams & Hospital Staff have successfully worked with ESCO Medicon products since 1972

MGOA / MGOO

P5




MGOO

MGOPGS

























Low Profile Body (24mm) allows back-to-back installation in shallow depth walls

Separate Flow Control Valve for ease of maintenance

6.4mm diametre Side Entry Air Supply Tubewww.escoindustries.com.au

Front Removable ‘Live Element’

Air Filter

Solid Brass Body and indexing sleeve

Key Indexed Aluminium Colour Coded outer clamp ring provides

secure fixing to panel

Exhaust Tube Elbow to suit 9.5mm bore flexible hose.May be rotated through 180º to suit installation

Venturi Operated Suction & Scavenge Outlet Each unit features a Driving Gas ‘Live Element’ Filter that is readily cleaned without removal of the mounting panel or gas pressure. In the event of drainage fluids entering the outlet, the section requiring cleaning may be detached from the incoming gas supply without having to shut off this supply.

Gas Terminal Outlets suitable for any need

or service in any room required

MGOPGS - Pump Gas Scavenge this outlet which is connected to a central vacuum pump system, complies with the connection and performance standards requirements of AS2896 The flow rate may be controlled by an inbuilt needle valve.

32

P7

NOTE:

TO CLEAN OUTLET AND REPLACE MAIN VALVE SEAL PROCEED AS FOLLOWS:

To carry out the following procedures it will be necessary to have some specific tools which are available as a set from ESCO (Cat. Number MGSK).

Remove threaded nipple assembly (item 2), by turning anti-clockwise using special 13mm socket spanner.On oxygen, air, nitrous oxide and surgical tool outlets, secondary valve (item 6) will automatically cut off the gas supply. Purge any rubbish that may have accumulated in valve or supply pipeline by depressing the secondary valve (item 6) with a small probe.CAUTION: Care should be taken during this operation to avoid eye damage.Remove main valve (item 3) from threaded nipple (item 2) and examine the “O” ring seal (item 4) for damage or deterioration. Note, it is fairly common after initial installation of a pipeline system for copper pipe filings to become embedded in this “O” ring which should be replaced to prevent leakage.After cleaning the valve seat, check “O” ring seal on nipple (item 11) for any damage, then reassemble the unit.

A)

B)

C)

D)

E)

SIS TYPE TERMINAL UNITS - Spare Parts

234567891011

Item Description Oxygen Medical Air

NitrousOxide

PumpSuction

SurgicalTools

Part Numbers

Threaded NippleMain Valve“O” Ring SealValve SeatSecondary ValveValve SpringRetaining RingName PlateScrew (2-off)“O” Ring Seal

OxygenAirNitrous OxideSuction (pump)Surgical Tools

Cat. Number MGOOCat. Number MGOACat. Number MGONOCat. Number MGOPSCat. Number MGOST

Z02C166Z02C167Z17B001Z02C296Z18B002Z25A021Z02A113Z03A046Z01A046Z17B006



Z02C166Z02C167Z17B001

--

Z25A002Z02A116Z03A048Z01A046Z17B006


2

3

4

5

6

7

8

9 10

11

23456789

101112131415

NOTE:

Threaded NippleRetaining RingName PlateScrew (2 off)Needle Valve BodyNeedle ValveRetaining NutKnob

Grub ScrewCap Screw (2 off)“O” Ring Seal“O” Ring SealOutlet Plug“O” Ring Seal

Z02C166

Z02A109

Z03A043

Z01A046

Z02G037

Z02E006

Z02C006

Z02A002

To carry out the following procedures it will be necessary to have some specific tools which are available as a set from ESCO (Cat. Number MGSK).

While virtually no maintenance is required on this valve, disassembly of needle valve may be carried out as follows:Needle Valve InspectionRemove needle valve knob (item 9) and retaining nut (item 8).Unscrew needle valve (item 7) and examine the “O” ring (item 12) for damage or deterioration.Clean valve of any foreign matter and reassemble.

A)B)

C)Item ItemDescription DescriptionPart

Numbers

Anaesthetic GasScavenge (Pump)

Cat. Number MGOPGS

Z01G011

Z01A049

Z17B002

Z17B003

Z02C026

Z17B006

PartNumbers

2

3

4

5

6

7

8

9

10

11

12

1314

15

SIS TYPE SUCTION PUMP OPERATED TERMINAL UNITS - Spare Parts

medicon medical systemsMGOPGS

P5




MGOO

MGOPGS

























P5




MGOO

MGOPGS

























P5




MGOO

MGOPGS

























Medical Gas OutletPump Gas Scavenge

Panel Punching Detail - SIS VenturiMaximum Panel Thickness - 2mm

Medical GasOxygen SIS Outlet


http://www.escomedicon.com.au

http://www.escomedicon.com.au


Designed with a unique Sleeve Index System to comply to ... · as well as the Spare Parts Repair...

Documents

Transcript of Designed with a unique Sleeve Index System to comply to ... · as well as the Spare Parts Repair...