DESIGN REGISTRATION

DESIGN REGISTRATION

FLUID RESERVOIRS

NOTCH

CT450B CT451B CT454B CT457BThe kit includes 3 hose nipples

CT157A CT157BS CT157BM CT157G CT157R CT157Z

Volume: 31 cm3 - Height: 55 mm - Ø 51,5 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: front brake master cylinder.The kit includes 3 hose nipples: 1 pc. Ø 7 mm 90 degree + 1 pc. Ø 8 mm 90 degree + 1 pc. Ø 8 mm straight.

CT155A CT155BS CT155BM CT155G CT155R CT155Z

Volumen: 16 cm3 - Altura: 51 mm - Ø 42 mm.CT - Depósitos de fluido provistos de una junta EDPM, compatible con los aceites DOT 3 / DOT 4 y DOT 5.1.Utilización aconsejada: bomba embrague.El kit incluye 3 tubos de unión (1 unit. Ø 7 mm, ang. 90° + 1 unit. Ø 8 mm, ang. 90° + 1 unit. Ø 8 mm).

116

DESIGN REGISTRATION

DESIGN REGISTRATION

FLUID RESERVOIRS

PURE

CT450B CT451B CT454B CT457BThe kit includes 3 hose nipples

CT147A CT147BS CT147BM CT147G CT147R CT147Z

Volume: 31 cm3 - Height: 55 mm - Ø 51,5 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: front brake master cylinder.The kit includes 3 hose nipples: 1 pc. Ø 7 mm 90 degree + 1 pc. Ø 8 mm 90 degree + 1 pc. Ø 8 mm straight.

CT145A CT145BS CT145BM CT145G CT145R CT145Z

Volumen: 16 cm3 - Altura: 51 mm - Ø 42 mm.CT - Depósitos de fluido provistos de una junta EDPM, compatible con los aceites DOT 3 / DOT 4 y DOT 5.1.Utilización aconsejada: bomba embrague.El kit incluye 3 tubos de unión (1 unit. Ø 7 mm, ang. 90° + 1 unit. Ø 8 mm, ang. 90° + 1 unit. Ø 8 mm).

118

DESIGN REGISTRATION

DESIGN REGISTRATION

CT125A CT125B CT125G CT125R CT125U

CTM125A CTM125B CTM125G CTM125R CTM125U

Volume: 17 cm3 - Height: 43 mm - Ø min 36 mm / Ø max 60 mm.CT - Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.CTM - Fluid tanks furnished with NBR seal, compatible with hydraulic mineral oil.Suggested use: clutch master cylinder.The kit includes 3 hose nipples: 1pc. Ø 7 mm 90 degree + 1pc. Ø 8 mm 90 degree + 1pc. Ø 8 mm straight.To mount the fluid tanks Adaptors are required.

CT115A CT115B CT115G CT115R CT115U

Volume: 12 cm3 - Height: 42 mm - Ø min 29 mm / Ø max 48 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: rear brake master cylinder.The kit includes a Ø 8 mm hose nipple.

CT450B CT451B CT454B CT457BThe kit includes 3 hose nipples

CT127A CT127B CT127G CT127R CT127U

Volume: 27 cm3 - Height: 51,5 mm - Ø min 40 mm / Ø max 65 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: front brake master cylinder.The kit includes 3 hose nipples: 1pc. Ø 7 mm 90 degree + 1pc. Ø 8 mm 90 degree + 1pc. Ø 8 mm straight.To mount the fluid tanks Adaptors are required.

FLUID RESERVOIRS

NEXT

120120

DESIGN REGISTRATION

DESIGN REGISTRATION

DESIGN REGISTRATION

DESIGN REGISTRATION

CT027A CT027B CT027G CT027R CT027U

Volume: 25 cm3 - Height: 46 mm - Ø 50 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: front brake master cylinder.The kit includes 2 hose nipples: 1 pc. Ø 7 mm - 1 pc. Ø 8 mm.

CT025A CT025B CT025G CT025R CT025U

CTM025A CTM025B CTM025G CTM025R CTM025U

Volume: 15 cm3 - Height: 49 mm - Ø 40 mm.CT - Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.CTM - Fluid tanks furnished with NBR seal, compatible with hydraulic mineral oil.Suggested use: clutch master cylinder.The kit includes a Ø 7 mm hose nipple.

CT017A CT017B CT017G CT017R CT017U

CTM017A CTM017B CTM017G CTM017R CTM017U

Volume: 15 cm3 - Height: 49 mm - Ø 40 mm.CT - Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.CTM - Fluid tanks furnished with NBR seal, compatible with hydraulic mineral oil.Suggested use: clutch master cylinder.The kit includes a Ø 8 mm hose nipple.

CT015A CT015B CT015BM CT015G CT015R CT015U CT015Z

Volume: 12 cm3 - Height: 42 mm - Ø 31 mm.Fluid tanks furnished with EDPM seal, compatible with DOT 3 / DOT 4 and DOT 5.1 oil.Suggested use: rear brake master cylinder.The kit includes a Ø 8 mm hose nipple.

122

TP014 - TP015TP017

TP028

DESIGN REGISTRATION

Ø (mm) Thread

57 M52x4 TP014A — TP014G TP014R —

42 M37x4 TP015A TP015B TP015G — —

37 M34x4 TP017A TP017B TP017G TP017R —

57 M52x4 TP028A TP028B — — TP028U

124