Design of Medical Devices Conference 2018Design of Medical Devices Conference2018 Graduate...

Design of Medical Devices

2018Conference

Graduate Minneapolis & McNamara Alumni Center, Minneapolis, MN

Innovation Workshop April 9thDMD Conference April 10th-12th

Welcome to the 17th Annual University of Minnesota Design of Medical Devices Conference

The Design of Medical Devices Conference was created in 2001 to enhance collaboration between academia and industry, promote policy, research and educational initiatives as they relate to medical device design and to support medical devices education at the University of Minnesota.

This forum, uniquely positioned in the middle of one of the most significant medical device communities in the world, has provided invaluable insight and leadership to promote the future of this evolving industry. Conference attendance has more than tripled since its inception and we look forward to continued growth.

The success of this conference is due in large part to the continued support from our industry sponsors and University of Minnesota partners. On behalf of the DMD Executive Planning Committee, we thank you and hope you enjoy this year’s conference!

Sincerely, 2018 Design of Medical Devices Conference Executive Planning Committee

The Design of Medical Devices Conference is presented by the University of Minnesota Earl E. Bakken Medical Devices Center (part of the Institute for Engineering in Medicine), the College of Science & Engineering and the Department of Mechanical Engineering. In cooperation with the Office of University Economic Development, University of Minnesota.

Connecting to the Wireless NetworksMcNamara Alumni Center

Network: UofM Guest Open a web browser and follow the

prompts to gain access

@umndmd #dmdconf

Graduate MinneapolisNetwork: GraduateMeeting

Password: DMD2018 (case-sensitive)

For technical assistance call: 612-362-6662

1

Technical Products Division

Premier Level Executive Level

Associate Level

Supporting Level

D e s i g n o f M e d i c a l D e v i c e s C o n f e r e n c e 2 0 1 8 C o r p o r a t e S p o n s o r s

COLOPLASTUROLOGY CARE

USDepartment of

Veterans Affairs

Save the Date: Monday, April 15, 2019www.dmd.umn.edu/workshop

2

Medical Device Innovation Workshop“Becoming a Medical Technology Innovator”

Monday, April 9, 2018 | Pinnacle Ballroom, Graduate Minneapolis

7:00 am Check-in and Continental Breakfast

8:00 amWelcome and Introduction Paul Iaizzo and William Durfee, University of Minnesota

8:25 am”How New Medical Products are Developed” William Durfee, Mechanical Engineering, University of Minnesota

9:10 am”Global Markets for Medical Devices” Tim Laske, Vice President, Research and Business Development, Medtronic AF Solutions

9:40 am”Market Assessment for a New Medical Device” Mike Finch, MILI Program, University of Minnesota

10:15 am Networking Break

10:40 am”Creativity Basics: Warming the Brain” Barry Kudrowitz, Director of Product Design, University of Minnesota

11:10 am Innovation Exercise 1: Generate an Idea that Solves a Need

12:00 pm Networking Lunch

12:45 pm”Evaluating Your Medical Device Idea Using Bench Tests, Animal Tests and Clinical Trials” Paul Iaizzo, Department of Surgery and Institute for Engineering in Medicine, University of Minnesota

1:30 pm”Medical Device Regulations” Paul Iaizzo, Department of Surgery and Institute for Engineering in Medicine, University of Minnesota

2:05 pm”Reimbursement for Medical Devices” Mike Finch, MILI Program, University of Minnesota

2:40 pm”Protecting Your Intellectual Property Through Patents” William Durfee, Mechanical Engineering, University of Minnesota

3:20 pm Networking Break

3:35 pm Innovation Exercise 2: Develop a New Medical Technology Product

4:20 pm Team Presentations

4:40 pm”The Corporate View of Technology Assessments and Acquisitions” Karim Bandali, Medtronic, Inc.

5:10 pm”How to Build a Medical Device Company” Michael Hoey, Co-Founder & Chief Technology Officer, NxThera Inc.

5:40 pmPanel Discussion: Medical Technology Innovation Panelists: Karim Bandali, Mike Finch, Michael Hoey, Tim Laske

6:00 pm Adjourn

Save the Date2018 DMD, China

December 10 – 12, 2018

Beijing International Convention Center

www.dmd.umn.edu/china/

3

THANK YOU to the participants of the 10th Annual 5.10k Road Race & Fun Run

DMD HAS A MOBILE APP SCHEDULE, MAPS, REMINDERS AND MORE, FOR FREE!

Save the DateMonday, April 15, 2019www.dmd.umn.edu/5K

A Special Thank You to the Technology Leadership Institute, UMN for your support of the 5.10k Fun Run & Road Race and the Innovation Fellows Program.

The 2017-2018 Earl E. Bakken Medical Devices Center Innovation Fellows Team and the 2018 Design of Medical Devices Conference would

like to thank the participants of this year’s 5.10k Fun Run and Road Race held Monday, April 9, 2018. Please join us next year for the

11th Annual 5.10k Road Race & Fun Run.

Gold SponsorPlatinum Sponsor

z.umn.edu/DMDGuidebook

Te c h n o l o g y

Tuesday, April 10, 2018o r d e r o f p r e s e n t a t i o n s m a y v a r y, r e f e r e n c e t h e o n l i n e p r o g r a m f o r p r e s e n t a t i o n d e t a i l s

Ski-U-Mah, McNamara Alumni CenterSession Organizers:Dawn Bardot, Medtronic, Inc. Marc Horner, ANSYS, Inc.

An In Silico Investigation of a Lobe-Specific Targeted Pulmonary Drug Delivery Method

Yu Feng Oklahoma State University

Digital Approach to Customized Biomedical Solutions: Customized Smart Braces and Prosthetics

Fluvio Lobo Fenoglietto University of Central Florida

High Resolution Simulation of Diastolic Left Ventricular Hemodynamics Guided by Four-dimensional Flow Magnetic Resonance Imaging Data

Trung Bao Le Medical College of Wisconsin

Towards Democratization of Clinical Diagnostics Tool Development for Hemodynamic Simulation

Dimitris Mitsouras University of Ottawa

SURGICAL ROBOTICS & COMPUTATIONAL SURGERY

Meridian Ballroom 4, Graduate MinneapolisSession Organizer:Timothy Kowalewski, University of Minnesota

Robotics and the Simulated HeartThomas Secord University of St. Thomas

Where Surgical Robots Can Advance Frontiers of Neurosurgery

Andrew Grande University of Minnesota

Soft and Flexible Technologies for Medical RobotsConor Walsh Harvard University

Minimally Invasive Pediatric Surgery: Challenges and Opportunities in Children

Brad Segura University of Minnesota

Resources for Innovators in the Pediatric SpaceGwen Fischer University of Minnesota

Meridian Ballroom 4, Graduate MinneapolisSession Organizer:Ann Graves, Abbott

International Regulatory AffairsAnn Graves Abbott

Comparison of Regulatory in a Large vs Small (start-up) Organization

Jonas Runquist LivaNova

Navigating Regulatory Affairs with the US FDASusan Alpert SFA Regulatory, LLC

What is Changing with China FDAMingdong Zhang Boston Scientific Greater China

WHY IS GLOBAL REGULATORY AFFAIRS SO EXCITING?

C a r d i o v a s c u l a r Tr a c k

D e v i c e D e v e l o p m e n t In n o v a t i o n Mo d e l i n gD i g i t a l

He a l t h Ne u r o e n g i n e e r i n g

Meridian Ballroom 1, Graduate MinneapolisSession Organizer:Balakrishna Haridas, Texas A&M University

Pediatric Medical Device Development by Pediatric Clinicians via Capstone Engineering Design Programs

Chester Koh Texas Children’s Hospital; Baylor College of Medicine; Southwest Pediatric Device Consortium

Epicardial Heart Assist Device Design for Pediatric HF Indications

John Criscione Texas A&M University

MEDICAL TECHNOLOGIES FOR PEDIATRIC INTERVENTIONS

4

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizers:Lucy Dunne, University of Minnesota Lars Oddsson, University of Minnesota & RxFunction Inc.

Design for SeniorsAlex Baker The Goodman Group

Vibrotactile Tilt Feedback Belt Beta TestingConrad Wall Harvard University (Emeritus)

Vibrotactile Stimuli Induced Arousals during Sleep as Potential Therapy for Nightmares Associated with PTSD

Chad Eiken NightWare

Compression Clothing for AutismMolly Fuller Molly Fuller Design

Meridian Ballroom 1, Graduate MinneapolisSession Organizer: John Bischof, University of Minnesota

MRI-Ultrasound Fusion Based Focal CryosurgeryRajesh Venkataraman Eigen

The Possibility of Focal Cryoablation of the Prostate Under MR Image Guidance

Satish Ramadhyani Galil Medical

Focal Cryotherapy of Localized Prostate Cancer: A Work in Progress

Franz Schmidlin Clinique des Grangettes

Computation Tools in the Service of CryotherapyYoed Rabin Carnegie Mellon University

Adjuvants and Immunotherapy in CryotherapyJohn Bischof University of Minnesota

NEXT-GENERATION TECHNOLOGY FOR FOCAL PROSTATE CRYOTHERAPY

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizer:Joseph Hale, University of Minnesota

Innovation: Big TalkCristin Moran 3M

Corporate Innovation UncoveredDakota Crow U.S. Bank

Medtech Innovation: The Big PictureWilliam (Bill) Murray CrossCourt Group

MEDICAL DEVICE INNOVATION

COMPUTATIONAL MODELING & REGULATORY SCIENCE 1

MEDICAL TECHNOLOGIES FOR PEDIATRIC INTERVENTIONS continued

WEARABLE MEDICAL TECHNOLOGIES 1

A.I Johnson Great Room, McNamara Alumni Center

Session Organizer:Paul Iaizzo, University of Minnesota

Multi-physics HPC Cardiovascular Simulations and Exascale Computing for Medical Device Testing

Jazmín Aguado-Sierra Barcelona Supercomputing Center

3D Printing Building the Bridge between Industry and Academics in Healthcare

Jesse Roitenberg Stratasys

CARDIOVASCULAR KEYNOTES

Concurrent Technical Sessions

8:00 a.m. Meridian Ballrooms 1-4, Graduate Minneapolis

Conference Welcome and Plenary SessionSponsored by Johnson & Johnson

Moderators: William Durfee, University of Minnesota Arthur Erdman, University of Minnesota

Devices for Portable Genome, Microbiome & Immunome Monitoring

George Church Harvard University

SPONSOR EXHIBIT SHOWCASE Meridian Foyer, Graduate Minneapolis


Registration and Continental Breakfast

Keynote Luncheon PresentationSponsored by Abbott

Moderator: William Durfee, University of Minnesota

Presentation of DMD Conference Outstanding Volunteer Award to Sarah Walbet, Minnesota Trade Office by Art Erdman, University of Minnesota

Medical Devices and the Health Care System: Where Are We Going?

Paul Howard (Invited) US Food and Drug Administration

(Keynote lunches are a separate billable event, meal tickets are required.)

CLINICAL CASE 1: LVAD IMPLANT

SCIENTIFIC POSTER SESSION 1 AND POSTER PREVIEWS

Pinnacle Ballroom, Graduate MinneapolisFull list of titles & authors are on pages 12 & 13. Posters available to view 10:00 a.m. - 5:30 p.m.


Session Organizer:

Dr. Rosemary Kelly, University of MinnesotaSurgeon:

Dr. Ranjit John, University of MinnesotaModerator:

Dr. Andrew Shaffer, University of Minnesota

7:00 a.m. Graduate Minneapolis

10:00 a.m. - 10:30 a.m.

10:30 a.m. - 12:00 p.m.

12:15 p.m. Memorial Hall, McNamara Alumni Center

2:00 p.m. - 3:30 p.m.



Complete the DMD Attendee Survey by May 1, 2018!Your input is greatly appreciated! As a thank you for your participation, we will randomly draw two names from the pool of those who have successfully submitted the survey. The winners will receive (1) Complimentary Registration to the 2019 DMD Conference. Check your email for the link to the 2018 DMD survey.

The winners will be chosen and notified shortly after the survey closes.

Tuesday, April 10, 2018o r d e r o f p r e s e n t a t i o n s m a y v a r y, r e f e r e n c e t h e o n l i n e p r o g r a m f o r p r e s e n t a t i o n d e t a i l s

5

Novel Assistive Device for Gait Training and Locomotion

Wen Liu The University of Kansas Medical Center

A Novel Genioglossal Strengthening Device for Obstructive Sleep Apnea Treatment

Erik Zavrel Cornell University

Judges:Mike Finch, Children’s Hospitals and ClinicsPaul Gam, Zurich MedicalKaren Kaehler, University of MinnesotaRandy Nelson, Evergreen Medical Technologies, Inc.Greg Peterson, University of Minnesota

Ski-U-Mah, McNamara Alumni CenterSession Organizers:Lucy Dunne, University of Minnesota Lars Oddsson, University of Minnesota & RxFunction Inc.

Soft Wearable Robots for the Community and the HomeConor Walsh Harvard University

Materials and Fabrication Strategies for Flexible Electronics

Sarah Swisher University of Minnesota

Learning from Patients using a Wearable Sensory Prosthesis

Lars Oddsson University of Minnesota & RxFunction Inc.

Ski-U-Mah, McNamara Alumni CenterSession Organizers:Dawn Bardot, Medtronic, Inc. Marc Horner, ANSYS, Inc.

An Experimental and Computational Modeling Framework for Evaluation of In-Vivo Knee Mechanics

Azhar Ali Stryker Orthopaedics

Translating Computer Modeling into Clinical PracticeAbbott Neuromodulation Team

The Potential Impact of Physiological Computer Models in Medicine: Regulation and Considerations for Ensuring Patient Safety

Richard Gray US Food and Drug Administration

Experiences with Simulation as Regulatory EvidenceJeff Bodner Medtronic, Inc.


Te c h n o l o g yC a r d i o v a s c u l a r Tr a c k



Meridian Ballroom 4, Graduate MinneapolisSession Organizers:

John Bischof, University of Minnesota

Irreversible Electrporation for Brain Cancer TreatmentRafael Davalos Virginia Tech

Improving Anti-tumor CD8 T Cell Memory Formation and Function by Focal Energy Therapy

Brandon Burbach University of Minnesota

Biophysical Responses of Cardiothoracic Tissues to Irreversible Electroporation Therapy

Lars Mattison University of Minnesota

Biomaterial Scaffolds for Ablation of Disseminating Tumor Cells

Samira Azarin University of Minnesota

Physical and Chemical Enhancement of and Adaptive Resistance to Irreversible Electroporation of Pancreatic Cancer

Qi Shao University of Minnesota

7:30 p.m. ADJOURN

ADVANCES IN ELECTROPORATION TECHNOLOGY & DEVICES

EMERGING MEDICAL INNOVATION VALUATION COMPETITION continued

CLINICAL CASE 2: THORACOPAGUS CONJOINED TWINS

WEARABLE MEDICAL TECHNOLOGIES 2

5:30 p.m. - 7:30 p.m.

STUDENT DESIGN SHOWCASE University Hall, McNamara Alumni Center

See Page 11 for Additional Information



Meridian Ballroom 1, Graduate MinneapolisSession Organizers:Joan Bechtold, University of Minnesota Conrado Aparicio, University of Minnesota

An in Vitro, Hydrogel-based Model to Assess the Mechanical Integrity of the Dermoepidermal Junction

Wei-Han Lin University of Minnesota

Cellular and Genome Engineering of the SkinMark Osborn University of Minnesota

Measurement of Epithelial Adhesion to Transmucosal Devices/Dental Implants

Faleh Tamimi Marino McGill University

Perioperative Wound HealingAmy Anne Lassig University of Minnesota

SKIN: THE WEAK LINK IN COMPLEX MUSCULOSKELETAL PROCEDURES


Session Organizer:

Dr. Rosemary Kelly, University of Minnesota

Surgeon and Moderator:

Dr. Daniel Saltzman, University of MinnesotaPre-Surgery Planning Presentation:

Bethany Juhnke, University of MinnesotaAlexander Mattson, University of Minnesota

4:00 p.m. - 5:30 p.m.

3:30 p.m. - 4:00 p.m.

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizers:Mike Finch, Childrens Hospitals and Clinics Randy Nelson, Evergreen Medical Technologies, Inc.

StethAidTitus John AusculTech Dx

Impulse - ZiBi PenSudesh Sivarasu University of Cape Town

Millimeter Wave Screening for PADDavid Nelson University of Southern Alabama

A Novel CPR Feedback DeviceAimee Tomlinson Lawrence Technological University

EMERGING MEDICAL INNOVATION VALUATION COMPETITION



Meridian Ballroom 1, Graduate MinneapolisSession Organizers:Dawn Bardot, Medtronic, Inc. Marc Horner, ANSYS, Inc.

Panel Discussion: The evolution of computer modeling, what will it take to drive adoption of simulation as clinical and regulatory evidence?

Chris Mullin NAMSABill Murray CrossCourt GroupGregory Molnar Udall Center of ExcellenceDan Schwartz Medical Device Innovation Consortium

Wednesday, April 11, 2018o r d e r o f p r e s e n t a t i o n s m a y v a r y, r e f e r e n c e t h e o n l i n e p r o g r a m f o r p r e s e n t a t i o n d e t a i l s


REHABILITATION TECHNOLOGIES 1

REIMBURSEMENT FOR MEDICAL TECHNOLOGY

CLINICAL CASE 3: LIVE THORACIC CASE

USABILITY, WHAT WE LEARN FROM POST MARKET USE





Meridian Ballroom 4, Graduate MinneapolisSession Organizers:Elizabeth Hsiao-Wecksler, University of Illinois at Urbana–ChampaignAndrew Hansen, Minneapolis VA Health Care System

From Biomechanics to Bionics: How Scientific Insights Unleash our Imagination and Inspire New Design Solutions for Assistive Technologies

Karl Zelik Vanderbilt University

Wearable Arm Motion Analysis SystemRajesh Rajamani University of Minnesota

Design, Validation, and Clinical Study of a Wearable Device for Spasticity and Rigidity Assessment

Seung yun (Leo) Song University of Illinois at Urbana-Champaign

6

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizer:Richard Stein, British Standards Institution

Panel Discussion:Dean Hooper HE ConsultingRobert North Human Centered Strategies, LLCElisabeth Roche Ximedica

Ski-U-Mah, McNamara Alumni CenterSession Organizer:Gregory Peterson, University of Minnesota

Learn About Reimbursement Language and ProcessesPaula Davis Abbott

Market Launch Time – Securing Coverage for Med Devices

Kathy Sherwood Inspire Medical Systems

In a Value Driven Healthcare Environment, How Data and Analytics are Driving Payers and Provider

Stephen Clark Optum

7:00 a.m. Graduate Minneapolis

8:00 a.m. Meridian Ballrooms 2/3, Graduate Minneapolis

10:00 a.m. - 10:30 a.m.


10:30 a.m. - 12:00 p.m.


KEYNOTE & AWARDS LUNCHEON


Sponsored by Medtronic, Inc.

Moderator: Paul Iaizzo, University of Minnesota

Presentation of Emerging Medical Innovation Valuation Competition Awards by Randy Nelson, Evergreen Medical Technologies, Inc.

Dr. Earl E. Bakken, Recipient of the 2018 DMD Conference Award

Keynote Address:Michael Coyle, Medtronic, Inc.


2:00 p.m. - 3:30 p.m.


Pinnacle Ballroom, Graduate MinneapolisFul list of titles & authors are on pages 14 & 15. Posters available to view 10:00 a.m. - 5:30 p.m.

NEUROENGINEERING 1Meridian Ballroom 1, Graduate Minneapolis

Session Organizers:Suhasa Kodandaramaiah, University of Minnesota Zhi Yang, University of Minnesota

Neural Communication and ControlZhi Yang University of Minnesota

3D Printed Transparent Skulls for Pan Cortical Neural Interfacing

Suhasa Kodandaramaiah University of Minnesota

The Stentrode: Endovascular Electrodes for Brain-Computer Interfaces

David Grayden The University of Melbourne


Session Organizer:

Dr. Rosemary Kelly, University of MinnesotaSurgeon:

Dr. Rafael Andrade, University of MinnesotaModerator:

Dr. Ilitch Diaz Gutierrez, University of Minnesota

DESIGNING MEDICAL DEVICES FOR PEOPLE: CONTEXTUAL INQUIRY AND NEEDS ANALYSIS

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizer:Kathleen Harder, University of Minnesota

Scoping Contextual Inquiry to Fit Problem SpaceEizabeth Roche Ximedica

Contextual Inquiry and Needs Analysis: Getting it RightKathleen Harder University of Minnesota

Design by ListeningGerard Torenvliet Medtronic CRHF

THREE-IN-FIVE COMPETITIONCompetition Co-Chairs: Randy Schiestl, Boston Scientific Corporation Paul Rothweiler, University of Minnesota

No-Power-Required, Touch-Activated Compression Garments for the Treatment of POTS (DMD2018-6886)

Rachael Granberry University of Minnesota

Gait Rehab Adaptive Machine: Design of GRAM, A Walking Linkage Powered Wheelchair for Lower Body Therapy and Assistance (DMD2018-6816)

Yasemin Sarigul-Klijn University of California, Irvine

Solid-Lattice Hip Prosthesis Design: Applying Topology and Lattice Optimization to Reduce Stress Shielding from Hip Implants (DMD2018-6804)

Yuhao He Altair Engineering

Design and Development of a Novel Drug Delivery Catheter for Atherosclerosis (DMD2018-6869)

Sunandita Sarker University of Nebraska-Lincoln

A High Efficiency Tunable Resonance Pump for Biomedical Applications (DMD2018-6917)

Thomas Secord University of St. Thomas

A Novel Genioglossal Strengthening Device for Obstructive Sleep Apnea Treatment (DMD2018-6809)

Erik Zavrel Cornell University

Design of a Stitched Textile-Based Wearable Thermal Actuator Garment to Attenuate Peripheral Microclimate Experience (DMD2018-6965)

Nika Gagliardi University of Minnesota

Isometric Quadriceps Strength Test Device to Improve the Reliability of Handheld Dynamometry in Patient with Anterior Cruciate Ligament Injury (DMD2018-6848)

Reggie St. Louis Harvard University

A Novel Lead Garment Structural System to Alleviate Orthopedic Stress for Surgeons (DMD2018-6920)

Hilary Johnson Massachusetts Institute of Technology

Wearable Olfactory Augmentation Device for Hazardous Gas Detection (DMD2018-6953)

Joshua Lee Georgia Institute of Technology

Judges:Stephanie Board, AbbottJohn Deedrick, Fourth ElementPaul Hindrichs, ActiveOrthoDel Lawson, 3MDanny Sachs, University of Minnesota

Registration and Continental Breakfast

Meridian Ballroom 4, Graduate MinneapolisSession Organizers:Andrew Hansen, Minneapolis VA Health Care System

REHABILITATION TECHNOLOGIES 2

Wednesday, April 11, 2018o r d e r o f p r e s e n t a t i o n s m a y v a r y, r e f e r e n c e t h e o n l i n e p r o g r a m f o r p r e s e n t a t i o n d e t a i l s

APPLICATIONS OF VIRTUAL REALITY IN MEDICAL DEVICE DEVELOPMENT

ADVANCES IN CARDIOVASCULAR MEDICAL DEVICES

NEUROENGINEERING 2Meridian Ballroom 1, Graduate Minneapolis

Session Organizers:

Taner Akkin, University of Minnesota Tay Netoff, University of Minnesota

Brain Responsive Stimulation For Partial Onset Seizures: Data Driven Treatment

Sharanya Desai NeuroPace, Inc.

Computational Models in Non-invasive Brain Stimulation

Alexander Opitz University of Minnesota

Advancement of Central Thalamic Deep Brain Stimulation as Therapy to Restore Cognitive Function in Traumatic Brain-Injured Patients

Jonathan Baker Weill Cornell Medicine

Epidural Electrical Facilitation of Lumbosacral Central Pattern Generators Drives Walking in Rodents

Carlos Cuellar Mayo Clinic

5:30 p.m. - 7:00 p.m. The Heritage Gallery McNamara Alumni Center

MEDICAL DEVICES INDUSTRY CAREER FAIR

See DMD website for Participating Companies

Successfully Navigating IP DiligenceScott Smith Merchant & Gould P.C.

7

Ski-U-Mah, McNamara Alumni CenterSession Organizer:Paul Iaizzo, University of Minnesota

A Semi-Stented and Chorded Mitral Valve Prosthesis: Design and Method of Chordal Setting and In Vitro Testing (DMD2018-6860)

Romilde Kotzé University of Cambridge

Thrombogenicity Testing for Blood-Contacting Medical Devices in an in vitro Human Blood-Loop (DMD2018-6875)

Yan Chen American Preclinical Services

Portable Ex Vivo Heart Perfusion Apparatus The Visible Heart® Mobile (DMD2018-6877)

Mikayle Holm University of Minnesota

Design and Development of a Novel Drug Delivery Catheter for Atherosclerosis (DMD2018-6869)

Sunandita Sarker University of Nebraska-Lincoln

Design of a Muscle-powered Soft Robotic Bi-VAD for Long-term Circulatory Support (DMD2018-6835)

Jooli Han Carnegie Mellon University

A Smartphone Stethoscope and Application for Automated Identification of Innocent Still’s Murmur (DMD2018-6905)

Titus John Children’s National Medical Center

Development and Validation of Numerical Model Simulation for RF Ablation using the Isolator Synergy Clamp (DMD2018-6949)

Michael Etheridge AtriCure, Inc.

Elizabeth Hsiao-Wecksler, University of Illinois at Urbana–Champaign

EMG Controlled Trans-Tibial ProsthesesPhil Voglewede Marquette University

Design of a Wheelchair SimulatorJohn Looft University of Minnesota

Development and Testing of a Supine Arm Exercise System for Persons with Spinal Cord Injuries

Gary Goldish Minneapolis VA Health Care SystemChristine Olney Minneapolis VA Health Care SystemGregory Voss Minneapolis VA Health Care System

Meridian Ballrooms 2/3, Graduate MinneapolisSession Organizers:

Derek Mathers, WorrellBrandon Bogdalek, Worrell

How Osso VR is using VR in Healthcare to Improve Outcomes

Justin Barad Osso VR

How SentiAR uses Augmented Reality to Improve Surgical Outcomes

Jennifer Avari Silva SentiAR

How AR is Impacting Advanced Medical Manufacturing

Ralph Taylor-Smith GE Ventures

Extending the Reach of Medical Imaging with VR/ARSergio Aguirre EchoPixel

REHABILITATION TECHNOLOGIES 2 CONT MEDICAL DEVICE INTELLECTUAL PROPERTY continued

A.I Johnson Great Room, McNamara Alumni CenterSession Organizer:Michael Bateman, Univeristy of Minnesota

Transcatheter Valve Therapies - The Future of Cardiac Structural Heart Treatment

Michael Bateman University of Minnesota

The Current State of Transcatheter Mitral Valve Replacement - What are the Current Challenges Faced by the Implanter?

Mario Goessl Allina

“Treating Valvular Regurgitation with Annuloplasty Devices – Can a Surgical Mainstay Become a Percutaneous Therapy?”

Mudassar Ahmed HealthEast

Simulators and Pre-Clinical Implants – Training Physicians to Use Novel Transcatheter Valves

Sarah Ahlberg Medtronic

ADVANCES IN PERCUTANEOUS THERAPIES TO TREAT VALVULAR HEART DISEASE

MEDICAL MEMSSki-U-Mah, McNamara Alumni Center

Session Organizer:Tianhong Cui, University of Minnesota

Microsystems for Cell Cultivation and AnalysisAlexander Revzin Mayo Clinics

Paper-based Electrolyte for Supercapacitive Mechanical Sensors

Ye Zhang University of Minnesota

Ultrasensitive Infrared Absorption Spectroscopy via Mass-Produced Coaxial Nanogap Resonators

Daehan Yoo University of Minnesota

Polymer-Based Graphene Biosensors for Biomedical Analysis

Tianhong Cui University of Minnesota


Session Organizer:

Dr. Rosemary Kelly, University of MinnesotaOpen Surgical Aortic Grafts

Dr. Rochus Voeller, University of MinnesotaEndovascular Aortic Grafts

Dr. Rumi Faizer, University of Minnesota

CLINICAL CASE 4: CURRENT STATE OF AORTIC GRAFTS

7:00 p.m. ADJOURN





Concurrent Technical Sessions4:00 p.m. - 5:30 p.m.

Meridian Ballroom 4, Graduate MinneapolisSession Organizer:Vaughn Schmid, University of Minnesota

Current Trends in Patent Examination at the USPTOLinda Dvorak US Patent & Trademark Office

Tools You Can Use: Commercially Available vs. Patentable

Amy Salmela Patterson Thuente IP

Patent Eligible Subject Matter: Drafting and Prosecuting Medical Device Patents in View of Alice/Mayo

Kent Sieffert Shumaker and Sieffert, P.A.

MEDICAL DEVICE INTELLECTUAL PROPERTY


3:30 p.m. - 4:00 p.m.




Meridian Ballrooms 2-4, Graduate MinneapolisOrganizer and Moderators: Kathleen Motzenbecker, Medical Alley AssociationWill Durfee, University of Minnesota

Keynote Presentations:

A Providers View of Digital HealthGreg Anthony Mayo Clinic

The Digital Health RevolutionAngie Franks Central LogicJodi Hubler Lemhi Ventures

Meridian Ballroom 1, Graduate MinneapolisSession Organizers:Carl Nelson, University of Nebraska-Lincoln Matthew Johnson, University of Minnesota

Robotic Platform for the Delivery of Gene Products into Single Cells in Organotypic Slices of the Developing Mouse Brain (DMD2018-6899)

Gabriella Shull University of Minnesota

Automation of Suturing Path Generation for da Vinci-Like Surgical Robotic Systems (DMD2018-6871)

Hossein Dehghani University of Nebraska-Lincoln

Design of an Automated Measurement System for Episcleral Venous Pressure (DMD2018-6189)

Carl Nelson University of Nebraska-Lincoln

Force Myography Signal Based Hand Gesture Classification for the Implementation of Real-Time Prosthetic Hand Control System (DMD2018-6937)

(Gaminda) Pankaja Withanachchi Wichita State University

Weight Distribution Monitoring System for Patients with Parkinson’s Disease (DMD2018-6807)

Pham Huy Nguyen Arizona State University

Obstetrical Forceps with Passive Rotation and Sensor Feedback (DMD2018-6859)Judith Beaudoin Massachusetts Institute of Technology

Port Placement Optimization for Robotically-assisted Minimally Invasive Surgery (DMD2018-6840)

Bob Stricko Intuitive Surgical

8:00 a.m. - 10:00 a.m. Concurrent Sessions

10:15 a.m. - 11:45 a.m. Concurrent Sessions

10:00 a.m. - 10:15 a.m.SPONSOR EXHIBIT SHOWCASE Meridian Foyer, Graduate Minneapolis

ADVANCES IN MEDICAL DEVICES 1

ADVANCES IN MEDICAL DEVICES 2




Meridian Ballrooms 2-4, Graduate MinneapolisOrganizer and Moderators: Kathleen Motzenbecker, Medical Alley AssociationWill Durfee, University of Minnesota

Keynote Presentations:

Digital Health: The FDA PerspectiveBakul Patel US Food & Drug Administration

Digital Health CybersecurityKen Hoyme Boston Scientific Corporation

The Future of Digital HealthPeter Fitzgerald Stanford University

Meridian Ballroom 1, Graduate MinneapolisSession Organizers:Matthew Johnson, University of Minnesota Carl Nelson, University of Nebraska-Lincoln

Simulating Airway Collapse in Obstructive Sleep Apnea using Fluid-Structure Interaction Methodologies (DMD2018-6818)

Trung Bao Le Medical College of Wisconsin

Contextual Design Theory Applied to Wearables that Facilitate Kangaroo Care by Interviewing Mothers of Hospitalized Infants (DMD2018-6915)

Abigail Clarke-Sather University of Minnesota Duluth

Mechanical Performance of PLLA Stent (DMD2018-6957)Linxia Gui University of Nebraska-Lincoln

Preparing for Conjoined Twins Separation through Virtual Reality (DMD2018-6895)Bethany Juhnke University of Minnesota

Interaction Force Modeling for Joint Misalignment Minimization toward Bio-Inspired Knee Exoskeleton Design (DMD2018-6921)

Yanjun Li City College of New York

8

2:00 p.m. TOURS DEPART Immediatly following the Keynote Luncheon, guided tours will depart

from the back of Memorial Hall. Tour descriptions can be found on pg 9.

2:00 p.m. ADJOURN

Thursday, April 12, 2018o r d e r o f p r e s e n t a t i o n s m a y v a r y, r e f e r e n c e t h e o n l i n e p r o g r a m f o r p r e s e n t a t i o n d e t a i l s

7:00 a.m. Registration and Continental Breakfast


LUNCHEON KEYNOTE AND AWARDS

Sponsored by Boston Scientific Corporation

Moderator: Arthur Erdman, University of Minnesota

Presentation of Three-in-Five Competition Awards by Randy Schiestl, Boston Scientific Corporation and Paul Rothweiler, University of Minnesota

“Digital Health Opportunities and Challenges”Jayant Parthasarathy UnitedHealth Group


Emerging Technology Forum “Digital Health”

Emerging Technology Forum “Digital Health”

The Visible Heart® Laboratory (VH Lab) www.vhlab.umn.eduDr. Paul Iaizzo has been at the University of Minnesota since 1990, performing research and teaching graduate and undergraduate courses. In 1997, Dr. Iaizzo and his co-workers created The Visible Heart® Laboratory in collaboration with Medtronic, Inc. Today, this lab is a premiere place to perform translational systems physiology research that ranges from cellular and tissue studies to organ and whole body investigations. The VH Lab also has a unique human heart library. The VH Lab embodies a creative atmosphere which is energized by some of the best and brightest students at the University. Our lab staff has over 100 years of collective research experience and functions as a highly efficient and productive team.Additional Tours on Tuesday, April 10 & Wednesday, April 11 at 10:00 a.m., Depart from the DMD Conference Registration Desk, Graduate Minneapolis

Characterization Facility (CharFac) www.charfac.umn.eduThe Characterization Facility provides academic and industrial partners access to state-of-the-art characterization methods which measure material properties from the micron-to the sub-nanometer scale. Our staff has extensive experience with the materials characterization of medical devices using light, x-rays, scanning probe and electron beam methods. We do both open research and proprietary work, and can perform the experiments for you or train you on the use of our extensive instrumentation: scanning and transmission electron microscopes, x-ray scattering/diffraction, Raman and Infrared spectroscopy and microscopy, surface analytical along with an extensive range of atomic force microscopy and nano-indentation methods.

G U I D E D T O U R S Tours are Thursday, April 12 at 2:00 p.m. and will depart from Memorial Hall, McNamara Alumni Center.

Please sign-up at the conference registration desk before 12:00 p.m. on Thursday, April 12.

Experimental Surgical Services (ESS) www.ess.umn.eduAt Experimental Surgical Services, we are experts in designing and conducting the appropriate research to determine the safety and efficiency of medical devices. We have more than 25 years of experience in pre-clinical assessment for the medical industry. In fact, we are the industry leader in researching and testing cardiac devices and surgical techniques. Over 500 open heart procedures and 1,500 procedures are completed annually. ESS is directed by Richard Bianco who has more than 25 years of experience in the pre-clinical assessment of virtually every animal model. The ESS in-house surgeons work with device companies to develop and validate research methods, provide consultation as necessary and offer interpretative and technical support.

Bentson Healthy Communities Innovation Center www.nursing.umn.eduIn 2013, a new 11,000 square foot learning simulation environment opened for nursing education, research, professional development and interprofessional cooperation in Weaver-Densford Hall. The center is designed to reflect the future of health care delivery and nursing science. The Innovation Center Includes: State-of-the-art technology, simulated environments that span the continuum of care and a variety of opportunities for collaborations with the health care community.

Earl E. Bakken Medical Devices Center (Bakken MDC) www.mdc.umn.eduThe Bakken MDC is dedicated to advancing medical device innovation through creating new knowledge and educating the next generation of medical device innovation leaders. The Bakken MDC is a unique interdisciplinary program that resides within the Institute for Engineering in Medicine. The Bakken MDC aims to strengthen interdisciplinary research among faculty in the health sciences and engineering in areas specifically related to medical devices. The center trains the next generation of medical device inventors (including the Innovation Fellows Program) and fosters new relationships with the medical device industry and government agencies to improve health care worldwide. This tour will highlight the 8,000 square ft. facility that is configured to promote interdisciplinary medical device development including needs assessment, creative brainstorming, prototyping and testing.Additional Tours on Tuesday, April 10 & Wednesday, April 11 at 10:00 a.m. & 3:30 p.m., Depart from the DMD Conference Registration Desk, Graduate Minneapolis

Minnesota Nano Center (MNC) www.mnc.umn.eduThe Minnesota Nano Center is a state-of-the-art facility for interdisciplinary research in nanoscience and applied nanotechnology. The center offers a comprehensive set of tools in two clean rooms for fabricating new micro- and nanoscale devices, such as integrated circuits, advanced sensors, and microfluidic systems. The MNC is also equipped to support nanotechnology research that spans many science and engineering fields, in areas as diverse as cell biology, high performance materials, and biomedical device engineering. This interdisciplinary work takes place in two new specialized labs to support interdisciplinary research in bio-nanotechnology and nano/micrometer-scale materials. Tour attendees will see the Nano Center’s new class 10 clean room and its fabrication tools, as well as our new applications labs devoted bio-nanotechnology and nanomaterials. PLEASE NOTE: Attendees will be required to wear clean-room coveralls and boots during this tour, please dress accordingly in slacks and closed toe shoes only.Additional Tours on Tuesday, April 10 at 10:00 a.m. & Wednesday, April 11 at 3:30 p.m., Depart from the DMD Conference Registration Desk, Graduate Minneapolis

9

F E A T U R E D E X H I B I TA Heart to Learn

www.vhlab.umn.eduTuesday & Wednesday from 8:00am-4:00pm (closed during lunches) Thursday from 8:00am-12:00pm Think 4, Graduate Minneapolis

This is an interactive display of perfusion fixed human hearts courtesy of the Visible Heart® Laboratory and the Department of Surgery. This is a unique library of human hearts received from organ donors and their families via LifeSource and the University of Minnesota’s Anatomy Bequest Program.

Perfusion fixation dilates these hearts as if they were filled with blood (diastole).Additionally, computer stations will be available to introduce The Atlas of Human Cardiac Anatomy and utilize during the display.

The Atlas of Human Cardiac Anatomy is an interactive educational site created and maintained by the Visible Heart® Laboratory at the University of Minnesota in collaboration with Medtronic, Inc. This site features images created from the Visible Heart® project, a novel educational tool which allows for viewing functional human cardiac anatomy from within.

10

11

1. “Designing a Better Electrocautery Device for us in ETV/CPC Procedures” Michael Bui, Eliana Henderson and Zach Koenig, Department of Biomedical Engineering, The University of Alabama at Birmingham

2. “A Time-Limited Approach to Preventing Endobronchial Intubation” Christopher Pinkham, Alyssa Mendenhall, William Bui Tran and Mike Bojarski, Department of Biomedical Engineering, University of Iowa

3. “Rebel with a Cause” Madison Chrisman, Elizabeth Niedert, Glen Schoenbeck and Paighton Schrupp, Department of Biomedical Engineering, University of Iowa

4. “Development of AED Pads that Break the Skin Impedance Barrier” Natalie Bolton, Sylvia Cai, William Jeon, Jamie Leong and Alexander Lu, Department of Bioengineering, Rice University

5. “Transfer Assistant Conveyor (TrAC): A Better Patient Transfer Method” David Lee, Hemali Patel and Samantha Westerhouse, Department of Engineering, The University of Alabama at Birmingham

6. The Coffee Straw Project: A Method to Reduce Fluoroscopy in Gastrojejunal Tube Placement” Velarchana Santhana, Ford Minaghan, James Chenoweth and Michael Garneau, Department of Biomedical Engineering, University of Iowa

7. “What’s Behind the Pink Ribbon: Tackling Truncal Lymphedema” Genevieve Goelz, Maria Fernanda Lárraga Martínez, Ashten Sherman and Anna Rodriguez, Department of Biomedical Engineering, University of Iowa

8. “Designing and Testing a Cap for Wearable Functional Near-Infrared Spectroscopy” Nikita Bhatia, Erin Landry, Jessica Chou Lin, Wesley Rivera and Dale Tollman, Department of Biomedical Engineering, College of Engineering, Boston University

9. “Optoco: Uterine Contraction Monitor for Low-resource Settings” Millie Antwi-Nsiah, Patricia DaSilva, Shannon Fei, Catherine Schult, Leah Sherman and Aniket Tolpadi, Department of Bioengineering, Rice University

10. “Deterrence and Indication of Intravenous Port Tampering” Ryleigh Nyman, Nichelle Preston, Chandra Yarlagadda, Hayden Crosby and Mason McGalliard, Department of Engineering, The University of Alabama at Birmingham

11. “Chew ‘n’ Play: Improving Children’s Feeding Therapy” Jeeyu Choi, Megan Helms, Monica Kettelson and Angela Olvera, Department of Biomedical Engineering, University of Iowa

12. “Daytime Nasal Breathing Aid” Clayton Andrews, Melissa Austin, Harrison Nguyen, Talia Kirschbaum, Pooja Nair, Eric Cao and Theodore Lee, Department of Biomedical Engineering, Johns Hopkins University

13. “Device for At-Home Monitoring of Jugular Venous Pressure” Nick Calafat, Yida Liu, Akhil Surapaneni, Jack Terrell and Angela Zhang, Department of Bioengineering, Rice University

14. “The Talon Retractor: A Modification to the Army/Navy Surgical Retractor” Greg Malicki, Bryan Tanner, Tommy Rashid and Sarah Cooper, Department of Biomedical Engineering, University of Iowa

15. “Low Cost Oxygen Delivery System for Neonatal Populations in Developing Countries” Senyo Ahadzie, Alexandra Eifert, Sean Kelly, Wenbo Lou and Jorge Whitley, Bioengineering and Mechanical Engineering, Rice University

16. “Automated Continuous Bladder Irrigation” Allegra Brancha and Claudia Covelli, Engineering Department, Engineering Innovation in Health, University of Washington; Lefteris Kampianakis, Electrical Engineering Department, Engineering Innovation in Health, University of Washington; Akshay Randad, Mechanical Engineering Department, Engineering Innovation in Health, University of Washington; Jialu Sun, Material Science and Engineering Department, Engineering Innovation in Health, University of Washington

17. “Digital Cure for Epilepsy” Paul Mayer, Qianyun Wang, Joseph D’Amico, Christopher Chee, Anika Zaman and Jeffrey Horowitz, Department of Electrical and Computer Engineering, Rice University

18. “Mechanical Guiding Arm Device for Hip Replacement Surgeries” Katrina Hatch, Dania Mallah, Dave Monaco, Sydney Watkins, Sarah Schwerdt and Connor Armstrong, Department of Biomedical Engineering, The University of Alabama at Birmingham

SHAI ASHKENAZI, UNIVERSITY OF MINNESOTA DAWN BARDOT, MEDTRONIC, INC. MICHAEL BATEMAN, UNIVERSITY OF MINNESOTA LESA BESMAN, UNIVERSITY OF MINNESOTA JIM FAIRMAN, QFO LABS ANDREW HANSEN, MINNEAPOLIS VA KATHLEEN HARDER, UNIVERSITY OF MINNESOTA JOSEPH HALE, UNIVERSITY OF MINNESOTA ELIZABETH HSIAO-WECKSLER, UNIVERSITY OF ILLINOIS AT URBANA–CHAMPAIGN

Student Design Showcase Tuesday, April 10, 5:30 p.m. - 7:30 p.m.

University Hall, McNamara Alumni Center

ALEC JOHNSON, ST. THOMAS UNIVERSITY CARL NELSON, UNIVERSITY OF NEBRASKA-LINCOLN KEVIN NICKELS, UNIVERSITY OF MINNESOTA BIRCE ÖNAL, MEDTRONIC, INC. LARS ODDSSON, UNIVERSITY OF MINNESOTA STEVE SALITERMAN, UNIVERSITY OF MINNESOTA MILANA SOLGANIK, UNIVERSITY OF MINNESOTA ALENA TALKACHOVA, UNIVERSITY OF MINNESOTA GREG VOSS, MINNEAPOLIS VA

PANEL OF JUDGES

Scientific Poster Session 1Tuesday, April 10, 10:30 a.m. - 5:30 p.m.

Pinnacle Ballroom, Graduate MinneapolisFinal papers will be published in the Proceedings of the Design of Medical Devices Conference in the ASME Digital Collection, and as a printed book by ASME Press.

1. Design and Development of a Novel Drug Delivery Catheter for Atherosclerosis (DMD2018-6869) Sunandita Sarker, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Yiannis Chatzizisis, Cardiovascular Biology and Biomechanics Laboratory, Cardiovascular Division, Department of Internal Medicine, University of Nebraska Medical Center; Srivatsan Kidambi, Department of Chemical & Biomolecular Engineering, University of Nebraska-Lincoln; Benjamin Terry, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln

2. Assessment of Intra and Inter-Observer Variability of Peripheral Arterial Tonometry Measurements (DMD2018-6801) Ashish Singal, Division of Cardiovascular Medicine, Lillehei Clinical Research Unit, Department of Medicine, University of Minnesota; Ziad Taimeh, Division of Cardiovascular Medicine, Department of Medicine, University of Minnesota; Gretchen Peichel and Dean Krueger, Division of Cardiovascular Medicine, Lillehei Clinical Research Unit, Department of Medicine, University of Minnesota; Peter Eckman and Uma Valeti, Division of Cardiovascular Medicine, Department of Medicine, University of Minnesota

3. Characterization of Pulsatility and Temperature Profile during Reactive Hyperemic Response (DMD2018-6805) Ashish Singal, Clarence Ojo, and Rumi Faizer, Division of Vascular Surgery, Department of Surgery, University of Minnesota

4. Vagus Nerve Stimulation for Blood Pressure and Heart Rate Regulation (DMD2018-6847) George O’Clock, Bruce KenKnight, and Elena Tolkacheva, Department of Biomedical Engineering, University of Minnesota

5. The Application of Deep Learning for the Classification of Internal Human Cardiac Anatomy (DMD2018-6887) Erik Gaasedelen, Alex Deakyne, and Paul Iaizzo, Department of Surgery, University of Minnesota

6. Development of Epicardial Circulatory Assist Devices: Material Considerations (DMD2018-6891) Elaine Soohoo, Edgar Aranda-Michel, Molly Kaissar, and Dennis Trumble, Department of Biomedical Engineering, Carnegie Mellon University

7. Identifying Properties for an Aortic Stent-Graft that Counteracts Hypertension (DMD2018-6907) Shannen Kizilski, Department of Mechanical Engineering, University of Minnesota; Omid Amili, Department of Aerospace Engineering and Mechanics, University of Minnesota; Filippo Coletti, Department of Aerospace Engineering and Mechanics, University of Minnesota; Rumi Faizer, Department of Surgery, University of Minnesota; Victor Barocas, Department of Biomedical Engineering, University of Minnesota

8. Feasibility of Using a Printed Microstrip Antenna in Evaluation of Peripheral Microcirculation (DMD2018-6912) David Nelson, Mechanical Engineering Department, University of South Alabama; Saeed Latif and Chad Austin, Electrical and Computer Engineering Department, University of South Alabama; Jeremy Chatham, Mechanical Engineering Department, University of South Alabama

9. Reduction of the Aortic Aneurysm Sac Pressure using Stent with Venturi Structure: A Numerical Study (DMD2018-6919) Mohammad Fazel Bakhsheshi, Jacob Loredo, and Mohammad Shariatzadeh, Department of Mechanical Engineering, University of British Columbia; Florian Vixege, Department of Engineering, University of Montpellier; Dana Grecov, Department of Mechanical Engineering, University of British Columbia

10. Temperature Monitoring with Zero Heat Flux Technology in Comparison with Thermocouple Needle Probe during Selective Hypothermia (DMD2018-6930) Mohammad Fazel Bakhsheshi, Department of Mechanical Engineering, University of British Columbia; Lynn Keenliside, Imaging Program, Lawson Health Research Institute; Ting-Yim Lee, Imaging Research Laboratories, Robarts Research Institute, Imaging Program, Lawson Health Research Institute, Department of Medical Imaging and Biophysics, Western University

11. Multiscale Entropy Technique Discriminates Single Lead ECG’s with Normal Sinus Rhythm and Sleep Apnea (DMD2018-6948) Suganti Shivaram, Department of Radiology, Mayo Clinic; Anjani Muthyala, Zahara Meghji, and Susan Karki, Department of Cardiovascular Medicine, Mayo Clinic; Shivaram Poigai Arunachalam, Department of Radiology, Mayo Clinic

12. Biomechanical Responses of Swine Esophagus Tissue to Irreversible Electroporation (DMD2018-6963) Lars Mattison, Department of Biomedical Engineering, University of Minnesota; Chloe Johnson, Department of Biological Sciences, University of Minnesota; Paul Iaizzo, Department of Surgery, Institute for Engineering in Medicine, University of Minnesota

13. Coronary Stenosis Measurements using K–Means Clustering (DMD2018- 6968) Farhad Akhbardeh, Department of Computer Science, University of North Dakota; Hasan Demirel, Department of Electrical and Electronic Engineering, Eastern Mediterranean University

14. Cranial Prostheses for Pan-Cortical Neural Interfacing (DMD2018-6901) Leila Ghanbari, Department of Mechanical Engineering, University of Minnesota; Russel Carter, Department of Neuroscience, University of Minnesota; Matthew Rynes, Department of Biomedical Engineering, University of Minnesota; Judith Dominguez, Department of Mechanical Engineering, University of Minnesota; Jay Hu, Department of Biomedical Engineering, University of Minnesota; Nahom Mossazghi and Timothy Ebner, Department of Neuroscience, University of Minnesota

15. An MRI Compatible Brain Probe for Signal Recording and Deep Brain Stimulation (DMD2018-6951) Corey Cruttenden and Mahdi Ahmadi, Department of Mechanical Engineering, University of Minnesota; Xiao-Hong Zhu and Wei Chen, Center for Magnetic Resonance Research, University of Minnesota; Rajesh Rajamani, Department of Mechanical Engineering, University of Minnesota

16. Principles of Computer Numerical Control Applied to Small Research Animal Surgical Procedures (DMD2018-6959) Mathew Rynes and Leila Ghanbari, Department of Mechanical Engineering, University of Minnesota; Jay Jia Hu, Department of Biomedical Engineering, University of Minnesota; Daniel Sousa Schulman, Gregory Johnson, and Michael Laroque, Department of Mechanical Engineering, University of Minnesota; Suhasa Kodandaramaiah, Department of Mechanical Engineering and Biomedical Engineering, University of Minnesota

17. Design and Validation of an Organizational Device for Endourological Surgery (DMD2018-6839) Michael Tradewell, Medical School, Department of Biomedical Engineering, University of Minnesota; Steve Morin, Veterans Affairs Health Care System; Kristin Chrouser, Veterans Affairs Health Care System, Department of Urology, University of Minnesota

18. Flexible Template to Assist MRI-guided Biopsy on Prostate Cancer (DMD2018-6909) Rui Li, School of Electrical and Computer Engineering, University of Georgia; Sheng Xu, Ivane Bakhutashvili, Bradford Wood, and Zion Tse, Center for Interventional Oncology Radiology and Imaging Sciences, NIH Clinical Center, National Institute of Biomedical Imaging and Bioengineering, National Cancer Institute Center for Cancer Research, National Institutes of Health

19. A Simple Aspect Ratio Dependent Method of Patterning Microwells for Selective Cell Attachment (DMD2018-6811) Erik Zavrel and Michael Shuler, Department of Biomedical Engineering, Cornell University; Xiling Shen, Department of Biomedical Engineering, Duke University

20. Toward a Microfluidic Implementation of a Digital Potentiometer (DMD2018-6812) Erik Zavrel, Department of Biomedical Engineering, Cornell University; Xiling Shen, Department of Biomedical Engineering, Duke University

21. Rewarming of Vitrified Heart Valves Using Magnetic Iron Oxide Nanoparticles (DMD2018-6929) Zhe Gao, Department of Engineering, University of Minnesota, Department of Chemistry, University of Minnesota; Zonghu Han, Department of Engineering, University of Minnesota; Kelvin Brockbank, Department of Bioengineering, Clemson University, Tissue Testing Technologies LLC; John Bischof, Department of Engineering, University of Minnesota

22. Miniature Coupled Inductor Coils Enable Remote, Wireless and Secure Product Authentication (DMD2018-6888) Dean Myers, Michael Davis, and Peter Ladwig, Hutchinson Technology Inc.

12

23. An Instrumented Urethral Catheter with Supercapacitor Based Force Sensor (DMD2018-6904) Ye Zhang, Mahdi Ahmadi and Rajesh Rajamani, Department of Mechanical Engneering, University of Minnesota

24. Real-Time Robust 3d Plane Extraction for Wearable Robot Perception and Control (DMD2018-6964) Ran Duan and Shuangyue Yu, Department of Mechanical Engineering, City College of New York; Guang Yue, Kessler Foundation and Rutgers University New Jersey Medical School; Richard Foulds, Department of Biomedical Engineering, New Jersey Institute of Technology; Chen Feng, Mitsubishi Electric Research Labs; Yingli Tian, Department of Electrical Engineering, City College of New York; Hao Su, Department of Mechanical Engineering, City College of New York

25. Finite Element Analysis and Experiment on Large Intestine End-To-End Anastomosis (DMD2018-6832) Ai Liao-yuan, Ge Shu-chen, Xu Jing-jing, Li Ming-yang, Mao Lin, and Song Cheng-li, Shanghai Institute for Minimally Invasive Therapy School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology

26. Fracture Toughness Characterization and Mixed-Mode Fracture Finite Element Modeling for Accurate Biopsy Needle Cutting Force Prediction (DMD2018-6834) Ng Si Yen, Guan-Jhong Lan, and Chi-Lun Lin, National Cheng Kung University

27. Finite Element Modeling and Analysis of Ventricular Septal Defect Occluders (DMD2018-6837) Yiming Li, Shanghai Institute for Minimally Invasive Therapy, School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology and Department of Assets Management, Xinhua Hospital Affiliated to Shanghai Jiaotong University School of Medicine; Kun Sun, Department of Pediatric Cardiology, Xinhua Hospital Affiliated to Shanghai Jiaotong University School of Medicine; Chengli Song, Shanghai Institute for Minimally Invasive Therapy, School of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology

28. Stent Fracture Predictions with Peridynamics (DMD2018-6866) Alex Vasenkov, Sunergolab, Inc.

29. Examination of Fluid-Structure Interaction in Stent Grafts and its Hemodynamic Implications (DMD2018-6872) Eric Looyenga and Stephen Gent, Department of Mechanical Engineering, South Dakota State University

30. Computational Fluid Dynamics Modeling of Blood as a Heterogeneous Fluid (DMD2018-6873) Isaac Smithee and Stephen Gent, Department of Mechanical Engineering, South Dakota State University

31. Computational Simulations of Ventricular Outflow Tract Obstructions Associated with Varied Replacement Valve Geometries (DMD2018-6916) Jorge Zhingre Sanchez and Lars Mattison, Department of Biomedical Engineering, University of Minnesota; Michael Bateman and Paul Iaizzo, Department of Surgery, University of Minnesota

32. Molecular Analysis of Polymeric Nanocomposites on Prosthesis Design (DMD2018-6934) Norma-Aurea Rangel-Vázquez, Department of Chemistry, University of Minnesota and Department of Posgrade, Instituto Tecnológico de Aguascalientes; Juan-Ramón Campos-Cruz, Department of Posgrade, Instituto Tecnológico de Aguascalientes; Jonathan Kalla, Department of Chemistry, PCC

33. Study of the Adsorption of Glibenclamide/Metformine in Hydrogels Using PM6 Model (DMD2018-6935) Norma-Aurea Rangel-Vázquez, Department of Chemistry, University of Minnesota and Department of Posgrade, Instituto Tecnológico de Aguascalientes; Nancy Delgadillo-Armendariz, Department of Posgrade, Instituto Tecnológico de Aguascalientes; Jonathan Kalla, Department of Chemistry, PCC

34. Using WebGL for Teaching Bone Identification (DMD2018-6966) Mikayle Holm, Department of Biomedical Engineering, University of Minnesota; Erik Gaasedelen, Bioinformatics and Computational Biology, University of Minnesota; Paul Iaizzo, Department of Biomedical Engineering, Bioinformatics and Computational Biology, and Surgery, University of Minnesota

35. Isometric Quadriceps Strength Test Device to Improve the Reliability of Handheld Dynamometry in Patient with Anterior Cruciate Ligament Injury (DMD2018-6848) Stephanie McNamara, Elizabeth Gallardo Hevia, Reggie St. Louis, and William Cho, John A. Paulson School of Engineering and Applied Science, Harvard University; Sangjun Lee, Martina Moyne, Brendan Quinlivan, Christopher Payne, and Conor Walsh, John A. Paulson School of Engineering and Applied Science, Harvard University and Wyss Institute for Biologically Inspired Engineering; Greg Schiller, Department of Physical Therapy and Athletic Training, Boston University; Louis Awad, Wyss Institute for Biologically Inspired Engineering and Department of Physical Therapy and Athletic Training, Boston University

36. A Novel Lead Garment Structural System to Alleviate Orthopedic Stress for Surgeons (DMD2018-6920) Hilary Johnson and Sally Miller, Department of Mechanical Engineering, MIT; Prianca Tawde, Bain and Company; Bethany LaPenta, Harvard Extension School; Daniel Teo, Singapore Institute of Manufacturing Technology; Thomas Cervantes, Stanford University, School of Medicine; Nishaki Mehta, University of Virginia, School of Medicine; Alexander Slocum, Department of Mechanical Engineering, MIT

37. Combination Product Patient Training: Howare Patients Trained and Who Conducts the Training? (DMD2018-6956) Virginia Lang and David Nalan, HirLan Inc: HirLan Institute of Human Factors

38. Optimization of Surface Scaffold Morphology and Structure Using Taguchi’s Design of Experiments (DMD2018-6813) Aishwarya Bhargav, Department of Mechanical Engineering, National University of Singapore; Vinicius Rosa, Faculty of Dentistry, National University of Singapore; Lu Wen Feng and Jerry YH Fuh, Department of Mechanical Engineering, National University of Singapore

39. Design and Verification of a Reloadable Adrenaline Auto-Injector for Intramuscular Injections (DMD2018-6944) Gokul Nair, Medical Devices Lab, Division of Bio-Medical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town; Michael Levin, Division of Asthma and Allergy, University of Cape Town; Sudesh Sivarasu, Medical Devices Lab, Division of Bio-Medical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town

40. “Air Slicer” for Immersive Visualization of Medical Images (DMD2018-6870) Hossein Dehghani, Sumit Laha, Pankaj Kulkarni, Pradipta Biswas, Ulas Bagci, and Sang-Eun Song, University of Central Florida

41. A High Efficiency Tunable Resonance Pump for Biomedical Applications (DMD2018-6917) Thomas Secord and Milad Audi, Department of Mechanical Engineering, University of St. Thomas

42. Preliminary Investigation of the Mechanics of a Novel Thoracic Cavity Extra Pulmonary Oxygenation Device (DMD2018-6908) Fariba Aghabaglou, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Keely Buesing, Department of Surgery, University of Nebraska Medical Center; Nathan Legband, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Connor Slagle, Department of Mechanical Engineering, University of Colorado, Boulder; Wanchuan Xie, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Mark Borden, Department of Mechanical Engineering, University of Colorado, Boulder; Craig Kreikemeier-Bower, Institutional Animal Care Program, University of Nebraska-Lincoln; Benjamin Terry, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln

43. An In Silico Investigation of a Lobe-Specific Targeted Pulmonary Drug Delivery Method (DMD2018-6928) Yu Feng, School of Chemical Engineering, Oklahoma State University; Xiaole Chen, School of Energy and Environment, Southeast University; Mingshi Yang, Department of Pharmacy, University of Copenhagen

44. An Attempt to Improve Stance Mechanics of Trans-Tibial Amputee Gait by the Design of a Modular Ankle Joint Prosthetic (DMD2018-6945) Alastair During and Sudesh Sivarasu, Medical Devices Lab, Division of Biomedical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town; George Vicatos, Department of Mechanical Engineering, University of Cape Town

Scientific Poster Session 1Tuesday, April 10, 10:30 a.m. - 5:30 p.m.

Pinnacle Ballroom, Graduate Minneapolis

13

Scientific Poster Session 2Wednesday, April 11, 10:30 a.m. - 5:30 p.m.Pinnacle Ballroom, Graduate Minneapolis

14

Final papers will be published in the Proceedings of the Design of Medical Devices Conference in the ASME Digital Collection, and as a printed book by ASME Press.

1. Solid-Lattice Hip Prosthesis Design: Applying Topology and Lattice Optimization to Reduce Stress Shielding from Hip Implants (DMD2018-6804) Yuhao He and Drew Burkhalter, Altair ProductDesign, Inc.; David Durocher, Altair Engineering, Inc.; James Gilbert, Altair ProductDesign, Inc.

2. A Novel Genioglossal Strengthening Device for Obstructive Sleep Apnea Treatment (DMD2018-6809) Erik Zavrel, Department of Biomedical Engineering, Cornell University; Matthew Ebben, Center for Sleep Medicine, Weill Cornell Medicine

3. Gait Rehab Adaptive Machine: Design of Gram, a Walking Linkage Powered Wheelchair for Lower Body Therapy and Assistance (DMD2018-6816) Yasemin Sarigul-Klijn, Department of Biomedical Engineering, UC Irvine

4. A Passive Two-Degree-of-Freedom Ankle-Foot Prosthesis (DMD2018-6820) Colin Elley and Carl Nelson, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln

5. Automatically Triggered Fes Rowing Device for Sci Patients with Motorized Return (DMD2018-6824) Jinsoo Kim and Ciaran O’Neill, John A. Paulson School of Engineering and Applied Sciences, Harvard University and Wyss Institute for Biologically Inspired Engineering; Kavya Pathak and Sai Shanthanand Rajagopal, John A. Paulson School of Engineering and Applied Sciences, Harvard University; Martina Moyne, John A. Paulson School of Engineering and Applied Sciences, Harvard University and University College Dublin; Glen Picard, Spaulding Rehabilitation Hospital; J. Andrew Taylor, Spaulding Rehabilitation Hospital and Harvard Medical School; Conor Walsh, John A. Paulson School of Engineering and Applied Sciences, Harvard University and Wyss Institute for Biologically Inspired Engineering

6. A Device for Improving Oxygenation in Patients with Acute Respiratory Distress Syndrome (DMD2018-6838) Alex Gordon, Kevin Ai Xin Jue Luo, and Rami Saab, The Hospital for Sick Children and Institute of Biomaterials and Biomedical Engineering, University of Toronto; Doreen Engelberts, Brian Kavanagh, and Takeshi Yoshida, The Hospital for Sick Children; Thomas Looi, The Hospital for Sick Children and Institute of Biomaterials and Biomedical Engineering, University of Toronto

7. Evaluation of a Novel Gait Training Device using a Pressure Suit to Support Body Weight (DMD2018-6845) Sara Koehler-McNicholas, Alana Cataldo, Elizabeth Koch, Brittany Rud, Laura Gude, and Charlotte Brenteson, Veterans Affairs Health Care System; Doug Johnson, Bruce Wigness, and John Hauck, Lite Run, Inc.; Lars Oddsson, University of Minnesota; Andrew Hansen, Veterans Affairs Health Care System, University of Minnesota

8. Design of a Percutaneous Articular Fracture Reduction Simulator (DMD2018-6852) Marcus Tatum and Geb Thomas, Department of Mechanical and Industrial Engineering, The University of Iowa; Donald Anderson, Department of Orthopedics and Rehabilitation, The University of Iowa

9. A Framework of Simulating Virtual Spine Patients to Assess Thoracic Volume Variations Due to Wedging Deformities (DMD2018-6853) Po-Chih Lee and Arthur Erdman, Department of Mechanical Engineering, University of Minnesota; Charles Ledonio, Innovative Surgical Devices, Inc.; David Polly, Department of Orthopaedic Surgery, University of Minnesota

10. A Device for Quantitative Analysis of the Thumb Ulnar Collateral Ligament (DMD2018-6868) Thomas Cervantes, Department of Mechanical Engineering, Massachusetts Institute of Technology and Stanford University School of Medicine; Woojeong Elena Byun, Ava Chen, Kristina Kim, and Kaitlyn Nealon, Department of Mechanical Engineering, Massachusetts Institute of Technology; Jay Connor, Mount Auburn Hospital; Alexander Slocum, Department of Mechanical Engineering, Massachusetts Institute of Technology

11. Preliminary Design and Testing of a Muscle-Powered Walking Exoskeleton for People with Spinal Cord Injury (DMD2018-6889) Vikram Katti and William Durfee, Department of Mechanical Engineering, University of Minnesota

12. Impedance of the Human Ankle During Standing for Posture Control (DMD2018-6894) Guilherme Ribeiro, Evandro Ficanha, Lauren Knop, and Mo Rastgaar, Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

13. Design Proposal for a Portable Elbow Exoskeleton (DMD2018-6931) Soumya Manna and Venketesh Dubey, Faculty of Science and Technology, Bournemouth University

14. Development of a Rehabilitation Game for Individuals with Spinal Cord Injury Using a User-Centered Design Process (DMD2018-6932) Stuart Fairhurst, Veterans Affairs Health Care System; Logan McCool, Veterans Affairs Health Care System, University of Minnesota; Kristin Scheel, Crystal Stien, and Charlotte Brenteson, Veterans Affairs Health Care System; Andrew Hansen, Veterans Affairs Health Care System, University of Minnesota; Gary Goldish and Gregory Voss, Veterans Affairs Health Care System; John Ferguson, Veterans Affairs Health Care System, University of Minnesota

15. Pantoe II: Improved Version of a Powered Transtibial Prosthesis with Ankle and Toe Joints (DMD2018-6942) Jinying Zhu, School of Mechatronical Engineering, Beijing Institute of Technology; Haotian She, Beijing Advanced Innovation Center for Intelligent Robot & System, Beijing Institute of Tecnnology; Qiang Huang, School of Mechatronical Engineering, Beijing Institute of Technology

16. In Vitro Functional Verification of a Novel Laxity Measurement Stress Radiography Device (DMD2018-6943) Giancarlo Beukes, Medical Devices Lab, Division of Biomedical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town; Sarthak Patnaik, Sunshine Hospital, Department of Arthroscopy and Sport Center; Sudesh Sivarasu, Medical Devices Lab, Division of Biomedical Engineering, UCT Research Centre of Exercise Science and Sports Medicine [HPALS], Department of Human Biology, University of Cape Town

17. Developing a Novel Gait Training Device Using a Minimally-Required-Assistance Principle (DMD2018-6947) Wen Liu, Department of Physical Therapy & Rehabilitation Science, Bioengineering Program, University of Kansas

18. Design of a Thumb Strength Testing Device (DMD2018-6952) Christian Fry, James Mardula, Brandon Lee, and Davide Piovesan, Biomedical Engineering Program, Gannon University

19. Design of a Novel Task-Based Knee Rehabilitation Exoskeleton Device (DMD2018-6961) Visharath Adhikari, Yimesker Yihun, and Hamid Lankarani, Department of Mechanical Engineering, Wichita State University

20. Design of a Modular, Partially Disposable Robot for Minimally Invasive Surgery (DMD2018-6821) Nicholas Nelson and Carl Nelson, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln

21. Waterjet Assisted Craniotome for Reduced Dural Tears (DMD2018-6850) Mathew Orner and Michael Greminger, Mechanical and Industrial Engineering Department, University of Minnesota Duluth; Amit Goyal, Neurosurgery Department, University of Minnesota

22. SMA Wire Characterization for 3D Steerable Active Devices (DMD2018-6856) Saeed Karimi and Bardia Konh, Department of Mechanical Engineering, University of Hawaii at Manoa; Hashem Afshariuon, Department of Mechanical Engineering, Villanova University

23. Finite Element Studies of Triple Actuation of Shape Memory Alloy Wires for Surgical Tools (DMD2018-6857) Bardia Konh, Department of Mechanical Engineering, University of Hawaii at Manoa

24. 3D Printing Realistic Endobronchial Models for Surgical Planning and Simulation (DMD2018-6858) Zhuo Zhao, School of Electrical and Computer Engineering, The University of Georgia; Javier Baracaldo, Department of Informatics, Technische Universität; Juliana Varona and Roberto Rueda-Esteban, Universidad de los Andes School of Medicine; Zion Tsz Ho Tse, School of Electrical and Computer Engineering, The University of Georgia and 3T Technologies LLC

Scientific Poster Session 2Wednesday, April 11, 10:30 a.m. - 5:30 p.m.Pinnacle Ballroom, Graduate Minneapolis

15

25. Neutral Electrode Contact Quality Monitoring: Quantifying Latent Risks, Improving Testability (DMD2018-6864) Daniel Friedrichs, Paul Kuehl, and Lori Lucke, Minnetronix, Inc.

26. Design and Simulation of Robotic Needle Guide for Transperineal Prostate Biopsy (DMD2018-6867) Hossein Dehghani, Shihao Zhang, Pankaj Kulkarni, Pradipta Biswas, Leslie Simms, and Sang-Eun Song, University of Central Florida

27. Pneumatic Piston Stepper Motor: An Enabler for MRI-Guided Robotic Interventions (DMD2018-6890) Brian Boland, School of Electrical and Computer Engineering, University of Georgia; Sheng Xu and Bradford Wood, Center for Interventional Oncology, Radiology and Imaging Sciences, National Institutes of Health; Zion Tsz Ho Tse, chool of Electrical and Computer Engineering, University of Georgia

28. An Electromagnetic Tracking Needle Clip: An Enabling Design for Low-Cost Image-Guided Therapy (DMD2018-6892) Zhuo Zhao, School of Electrical and Computer Engineering, The University of Georgia; Sheng Xu and Bradford Wood, Center for Interventional Oncology, Radiology and Imaging Sciences, NIH Clinical Center, National Institute of Biomedical Imaging and Bioengineering, & National Cancer Institute Center for Cancer Research, National Institutes of Health; Zion Tsz Ho Tse, School of Electrical and Computer Engineering, The University of Georgia and 3T Technologies LLC

29. Realization of a Statically Balanced Compliant Planar Remote Center of Motion Mechanism for Robotic Surgery (DMD2018-6911) Karthik Chandrasekaran, Adarsh Somayaji, and Asokan Thondiyath, Department of Engineering Design, Indian Institute of Technology Madras

30. Novel Design of Stabilizing Device for Tube Thoracostomy (DMD2018-6913) Jennifer Kim, Grace Joseph, Joshua Cadavez, Nicholas Gulachek, and Juan Rujana, Earl E. Bakken Medical Devices Center, University of Minnesota; Marcos Molina, SimPortal, University of Minnesota Medical School

31. Design and Development of a Soft Robotic Back Orthosis (DMD2018-6806) Deven Govin, School of Biological and Health Systems Engineering, Ira A. Fulton Schools of Engineering, Arizona State University; Luis Saenz, School for Engineering of Matter, Transport, and Energy, Ira A. Fulton Schools of Engineering, Arizona State University; Grigoria Athanasaki, The Polytechnic School, Ira A. Fulton Schools of Engineering, Arizona State University; Laura Snyder, Barrow Neurological Institute, St. Joseph’s Hospital & Medical Center; Panagiotis Polygerinos, The Polytechnic School, Ira A. Fulton Schools of Engineering, Arizona State University

32. Soft Robotic Shoulder Assist Device - Towards Prevention of Shoulder Overuse Syndrome in Wheelchair Users (DMD2018-6808) Saivimal Sridar, The Polytechnic School, Ira A. Fulton Schools of Engineering, Arizona State University; Ripujit Gindam Narasimha, School for Engineering of Mass Transport and Energy, Ira Fulton School of Engineering, Arizona State University; Amogh Maharudra Gadagi, School for Engineering of Mass Transport and Energy, Ira Fulton School of Engineering, Arizona State University; Vishwarath Taduru, School for Engineering of Mass Transport and Energy, Ira Fulton School of Engineering, Arizona State University; Courtney Strzelczyk, Barrow Neurological Institute, St. Joseph’s Hospital & Medical Center; Trent Maruyama, Barrow Neurological Institute, St. Joseph’s Hospital & Medical Center; Christopher StClair, Barrow Neurological Institute, St. Joseph’s Hospital & Medical Center; Panagiotis Polygerinos, The Polytechnic School, Ira A. Fulton Schools of Engineering, Arizona State University

33. The Application of Series Elastic Actuators in the Hydraulic Ankle-Foot Orthosis (DMD2018-6822) Jeong Yong Kim and William Durfee, University of Minnesota, Twin Cities

34. Wearable and Stretchable Piezoelectric Nanogenerator for Skin Applications (DMD2018-6874) Ioana Voiculescu, The City College of New York; Fang Li, New York Institute of Technology; Glen Kowach, Hao Su, and Kun Lin Lee, The City College of New York

35. Tension-Controlled Active Compression Garment for Treatment of Orthostatic Intolerance (DMD2018-6884) Robert Pettys-Baker, Nicholas Schleif, J. Walter Lee, Sophia Utset-Ward, Mary Ellen Berglund, Lucy Dunne, and Brad Holschuh, Department of Design, Housing, and Apparel, University of Minnesota; Christopher Johnson, Kevin Kelly, Bruce Johnson, and Michael Joyner, College of Medicine, Mayo Clinic

36. No-Power-Required, Touch-Activated Compression Garments for the Treatment of Pots (DMD2018-6886) Rachael Granberry, Department of Design, Housing, and Apparel, University of Minnesota; Nicole Ciavarella, Department of Material Science, University of Minnesota; Robert Pettys-Baker, Mary Ellen Berglund, and Brad Holschuh, Department of Design, Housing, and Apparel, University of Minnesota

37. Heatguard: An Ultra-Low-Cost 3D Printed Sensor for Body Temperature Alert & Reporting System (DMD2018-6914) Rui Li and Aaron Smith, School of Electrical and Computer Engineering, The University of Georgia; Harshitha Tadinada, Department of Computer Science, The University of Georgia; Zion Tse, School of Electrical and Computer Engineering, The University of Georgia

38. Wearable Tremor Reduction Device (TRD) for Human Hands and Arms (DMD2018-6918) Sreekanth Rudraraju and The Nguyen, California State University Fresno

39. A Modular Approach for Lightweight Humanoid Hand Design using High Torque Density Electric Actuators (DMD2018-6922) Haotian Cui and Shuangyue Yu, Department of Mechanical Engineering, City College of New York; Xunge Yan, INNFOS(Beijing) Technology Co., Ltd; Shuo-Hsiu Chang and Gerard Francisco, Department of Physical Medicine and Rehabilitation, University of Texas Health Science Center at Houston; Qiushi Fu, Department of Mechanical and Aerospace Engineering, University of Central Florida; Hao Su, Department of Mechanical Engineering, City College of New York

40. Wearable Olfactory Augmentation Device for Hazardous Gas Detection (DMD2018-6953) Mi Hyun Choi, Coulter Department of Biomedical Engineering, Georgia Institute of Technology; Joshua Lee and Frank Hammond III, Woodruff School of Mechanical Engineering, Georgia Institute of Technology

41. Prediction of Ground Profile for Lower-Leg Prosthesis Control using a Visual-Inertial System (DMD2018-6962) Guilherme Ribeiro and Mo Rastgaar, Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

42. Design of a Stitched Textile-Based Thermal Actuator Garment to Attenuate Peripheral Microclimate Experience (DMD2018-6965) Nika Gagliardi and Esther Foo, Department of Design, Housing, and Apparel, University of Minnesota; Ellen Dupler, Department of Electrical Engineering, University of Minnesota; Simon Ozbek and Lucy Dunne, Department of Design, Housing, and Apparel, University of Minnesota

43. Real-Time, Non-Contact Position Tracking of Medical Devices and Surgical Tools through the Analysis of Magnetic Field Vectors (DMD2018-6862) Mohammad Odeh, Edward Nichols, Fluvio Lobo Fenoglietto, and Jack Stubbs, Institute for Simulation and Training, University of Central Florida

44. Design and Evaluation of the Postursense Cushion (DMD2018-6883) Prateek Garag, Mechanical Science and Engineering, University of Illinois at Urbana Champaign; Austin Chen, Industrial Design, University of Illinois at Urbana Champaign; Deana McDonagh, Industrial Design, Beckman Institute, University of Illinois at Urbana Champaign; Elizabeth Hsiao-Wecksler, Mechanical Science and Engineering, University of Illinois at Urbana Champaign

45. Revised Design of a Passive Hydraulic Training Simulator of Biceps Spasticity (DMD2018-6881) Yinan Pei and Randy Ewoldt, Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign; Christopher Zallek, Department of Neurology, OSF HealthCare Illinois Neurological Institute; Elizabeth Hsiao-Wecksler, Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign

17 Years Strong! Design of M

edical Devices ConferenceU

niversity of Minnesota

2019 Design of Medical Devices ConferenceApril 15, 16-18

Graduate Minneapolis & McNamara Alumni CenterMinneapolis, Minnesota

Save

the

Date

s!2018 DMD Conference Executive Planning Committee:

Dawn Bardot, Committee MemberWilliam Durfee, Technical Program ChairTracee Eidenschink, Committee MemberArthur Erdman, Conference ChairMike Finch, Committee MemberAlex Hill, Committee MemberJenny Holden, Conference AdministratorTrisha Huntosh, Conference CoordinatorPaul Iaizzo, Conference Co-ChairMatthew Johnson, Contributed Papers Co-ChairRosemary Kelly, Clinical Cases ChairAbigail Lavey, Assistant CoordinatorKathleen Motzenbecker, Emerging Technology Forum Co-ChairCarl Nelson, Contributed Papers Co-ChairKen Rosen, Committee MemberKate Taylor, Committee MemberDale Wahlstrom, Committee MemberGary Williams, AV Technical Coordinator

Special Thanks to:ASME Journal of Medical DevicesContributed Papers Track Chairs and ReviewersConference VolunteersCreative ResourcesCurbside ProductionsGraduate MinneapolisD’Amico CateringHubbell/TynerMcNamara Almuni CenterPSAV Presentation ServicesSession OrganizersSoderberg’s Floral & GiftUMNPosters.comWallace | Carlson Printing

2020 Design of Medical Devices ConferenceApril 6, 7-9

Graduate Minneapolis & McNamara Alumni CenterMinneapolis, Minnesota

Design of Medical Devices Conference 2018Design of Medical Devices Conference2018 Graduate...

Documents

Transcript of Design of Medical Devices Conference 2018Design of Medical Devices Conference2018 Graduate...