Design Features - 3.imimg.com
Transcript of Design Features - 3.imimg.com
Design Features :
Single stage, horizontal End-Suction type.
Back pull-out construction allows easy dismantling of bearing frame and impeller assembly.
Pump has a one piece polypropylene smooth volute casing.
Pump casing assembly is hydrostatically tested to a minimum of 1.5 times the
-shut-off pressure.
Self venting.
Shaft sleeves in wide variety of materials (SS316, Alloy-20, Haste Alloy - B & C,
-Titanium) depending on the application.
Shaft Sealing by gland packing or mechanical seal with provision for flushing liquid.
Easy maintenance and replacement of mechanical seal.
Impellers are of Semi-open and closed type.
Impellers are dynamically balanced.
Expert and skilled selection of materials to achieve a high rate of corrosion resistance.
Series ‘kpp’ Pump Technical Data
Model Suction Discharge Impeller Dia
Head (m) m /hr. Head (m)m /hr. Head (m)m /hr.Head (m)m /hr.
kpp25-125 40 25 125 0 5 4 1 6 10 16 4
kpp40-160 50 40 160 0 11 12 5 6 22 48 40
kpp40-200 75 40 200 0 15 20 6 10 30 70 15
kpp50-200 75 50 200 5 16 23 4 20 32 72 8
1500 2900
PUMP SPEED IN RPM
Minimum Maximum Minimum Maximum
P r a k a s h P r o c e s s P u m p s
Manufactured by :
Office : No.3, Maduvankarai II Street,Alandur P.O., Chennai - 600 016.
Factory : 248/1, SIDCO Industrial Estate,Thirumudivakkam, Chennai - 600 044.
Tel 044 - 2234 97 70 Fax 044 - 2234 20 11.Telefax 044 - 2244 37 43.E-mail [email protected]
Polypropylene Centrifugal PumpsBack Pull Out Design
For Corrosive Chemicals
Applications:
Loading & Unloading of Hcl, H SO .
Phosphoric Acid
Hydrofluosilicic Acid
Organic Solvents
Alcohols
Water Treatment Plant
Effluent Treatment Plant
Anodic Sludge/Electroplating baths
Acid pickling
Scrubbed liquids containing F, Cl, SO , -
and Ammonia gases.
Chlorinated Brine.
2 4
2
Range of Coverage:
Capacity : 60 m /hr.
Head : 45 metres
Temp : 100 C
Speed : 2900 RPM
3
O