Design & Communication Guidlines
Transcript of Design & Communication Guidlines
Premium Denture Solutions
Design &CommunicationGuidlines
Inhoud
Introduction___________________________________________________________3
Logo_Vertex_Dental______________________________________________________4
Variations________________________________________________________________4
Unpermitted_applications____________________________________________________4
Colours_Vertex_Dental____________________________________________________5
Primary_Colours_ __________________________________________________________5
Typography_ __________________________________________________________6
Dax_family_ ______________________________________________________________6
Caflisch_Script_Pro__________________________________________________________6
Identity_design_________________________________________________________7
Company_cards____________________________________________________________7
Address_label_____________________________________________________________7
Stationary________________________________________________________________8
Envelopes________________________________________________________________9
With_Compliments_Card_ ___________________________________________________10
Presentations_________________________________________________________ 11
Powerpoint_template_ _____________________________________________________11
Brochures____________________________________________________________ 12
Cover_examples__________________________________________________________12
Reverse_side_examples_____________________________________________________13
Inside_examples__________________________________________________________14
Brochures____________________________________________________________ 15
Inside_examples__________________________________________________________15
Leaflets_ ____________________________________________________________ 16
examples_______________________________________________________________16
Internet_____________________________________________________________ 17
examples_______________________________________________________________17
Communication_Materials________________________________________________ 18
Advertisments_ __________________________________________________________18
Poster__________________________________________________________________19
Images______________________________________________________________ 20
2
Introduction
Dear partner,
Please find our Design & Communication Guide Lines. This document serves as a corporate
identity and brand standards manual of Vertex-Dental BV. All expressions in the field of
communication, both internally and externally, must conform to the standards and guideli-
nes stated within.
For further information please contact us.
Sincerely,
Jan Willem Carelse
Manager Sales & Marketing
3
Logo_Vertex_Dental
VariationsNormal Logo white
Logo Black
Unpermitted applicationsLogo in any other color
44
CMYK
C 100% M 100% Y 0% K 28%
PANTONE
PMS 274
RGB
R 46 G 0 B 104
Colours_Vertex_Dental
Primary Colours
The colours can be used in different graduations and combinations
5
PANTONE 274
C 100% M 100% Y 0% K 28%
R 46 G 0 B 104
PANTONE 319
C 52% M 0% Y 19% K 0%
R 132 G 201 B 207
PMS 274
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
Typography
Dax familyLight Light italic
AbCDEfghIjklmnoPQ_ abcdefghijklmnoPQabcdefghijklmnopqrst_ abcdefghijklmnopqrstRegular Regular italic
ABCDeFGhiJkLMNoPQ abcdefghijklmnoQRabcdefghijklmnopqrst abcdefghijklmnopqstMedium Medium italic
aBCDefghIjkLMnoP_ abcdefghijklmnoPabcdefghijklmnopqr_ abcdefghijklmnopqrBold Bold italic
ABCDEfGhijKlMNOP abcdefghijklmnoPabcdefghijklmnopq abcdefghijklmnopqextrabold extrabold italic
abcdefghijklmnoP abcdefghijklmnoPabcdefghijklmnopq abcdefghijklmnopqBlack Black italic
abcdefghijklmno abcdefghijklmnoabcdefghijklmnop abcdefghijklmnopNot allowedextreme character broadening or tightening
Caflisch Script Pro Use only for payoff
Premium Denture Solutions6
nonseniVulputat leamet ino
nonsenibhlamnioaiaVulputat leamet ino irit lam nonsenibh euasgiam, sea
Identity_design
Company cards
Address label
john_Doemanager
Johan van oldenbarneveltlaan 623705 hJ | Zeist | The Netherlands t > +31 (0)30 69 76 749f > +31 (0)30 69 55 188e > [email protected] > www.vertex-dental.com
john_Doemanager
Johan van oldenbarneveltlaan 623705 hJ | Zeist | The Netherlands t > +31 (0)30 69 76 749f > +31 (0)30 69 55 188e > [email protected] > www.vertex-dental.com
Premium Denture Solutions
Vertex Dental Asia | The Alpha #04-16 | Singapore Science Park ii10 Science Park Road | Singapore 117684
7
t > +31(0)306976749f > +31(0)306955188e >[email protected] > www.vertex-dental.com
ChamberofCommerceUtrecht30063196VAT809415094B01
Vertex-Dental B.V.JohanvanOldenbarneveltlaan62|3705HJZeist|P.O.Box10|3700AAZeist|TheNetherlands Premium Denture Solutions Premium Denture Solutions
Identity_design
Stationary
Front Following papers
Reverse side
Premium Denture Solutions
Jeroen van StuijvenbergDa Costakade 61 III1053 WG Amsterdamt.a.v. de afdeling techniekonderwerp: Huisstijl
25 november | 2009
Geachte heer, mevrouw,
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ultricies, erat at feugiat adipiscing, magna justo interdum elit, sed porttitor velit dui et ante. Sed porttitor ipsum vitae dui lacinia mollis. Proin consequat, ipsum ut imperdiet adipiscing, risus lectus feugiat elit, eu tristique purus felis et elit. Duis lacinia tellus sit amet dolor bibendum volutpat. Fusce sodales neque mattis metus consequat viverra. Mauris et tempor erat. In hac habitasse platea dictumst. Maecenas magna orci, ultricies ac rutrum a, mattis ac neque. Nulla malesuada urna id lectus pulvinar scelerisque. Praesent pellentesque lobortis nisi non imperdiet. Integer a porttitor ipsum. Curabitur quis suscipit tellus. Phasellus eget elementum urna. Nullam vitae pulvinar enim.
Nulla facilisi. Cras posuere accumsan dapibus. Sed ullamcorper pharetra vestibulum. Vivamus a nunc ac ligula aliquam laoreet. Nulla erat augue, bibendum nec aliquam eget, porttitor sed elit. Etiam odio metus, ornare sed blandit sed, porta at sem. Curabitur sollicitudin dui vel nulla interdum vulputate. Proin erat nisl, imperdiet eu tristique eget, malesuada nec lacus. Vestibulum adipiscing, mauris quis facilisis pellentesque, augue metus laoreet mauris, vitae fermentum dolor nunc sed erat. Phasellus consequat purus nec mi sagittis tempor.
Met vriendelijke groet,
Gerrit Munnik
Nulla facilisi. Cras posuere accumsan dapibus. Sed ullamcorper pharetra vestibulum. Vivamus a nunc ac ligula aliquam laoreet. Nulla erat augue, bibendum nec aliquam eget, porttitor sed elit. Etiam odio metus, ornare sed blandit sed, porta at sem. Curabitur sollicitudin dui vel nulla interdum vulputate. Proin erat nisl, imperdiet eu tristique eget, malesuada nec lacus. Vestibulum adipiscing, mauris quis facilisis pellentesque, augue metus laoreet mauris, vitae fermentum dolor nunc sed erat. Phasellus consequat purus nec mi sagittis tempor.
Mod dignisisci bla con verit, quat laor autatincilla adiam eum estie tat praesto exer ipsustisi.Em init wisim ilit wis el iriure tat, velisi. Velissenim qui bla facilis modiam nulla feum amcorpe raesequatum iriureet ipisi. Alis exero corper adit numsandre mod tat praessi bla cortionsenim ing exero odionul lumsand igniamcorero conulput vulla am veliquat incidui scilit vero dolor ip et eummodit lore ming el utat. Liquat lam, velit et diat. Ut wis er sustrud estrud tatem vulput dunt wis aut nullaor si.
Ut dunt ipsusci liquat del dio odolore exeraes endit, consecte tet lore facidui bla feum nim zzriurer iriure dit nonullaore doloborerit ut iuscin heniam, quiscin ciliquis delessi tatumsan ullam velit in ulla alit aliquam, verosto dui blandio nsequismod min hent ulput loborper susci bla facinci llaorem dolore tie faccum dunt lor si blaore magna am, commod tinim eugiam iliquat la feugue commolenibh enismod exeros nos nos augue veliqui blandiamcor ilit, consed molese enis at nisismo dipsumm odoloreet lor senim il eum vent ilisisi.
Doloreet ad exerat prat ulputpat. Ut illaorem quat ad tatue tisi tin verosto consenit utpat, cor iustrud te tetum do odip etum zzriustincil utpate dolore molesse diatum veliquisi bla aute molobore tionsequam euguercilit volorti onulputpat, consenit estrud tinci blandre euissed dolore doloree tummolore faccummy nostrud magna faciliquisci te doloree tuercip ex eui exerosto digniat. Duis numsan etummod iamconsent luptat. Duisl dionsent eliquat delisit nis aliquat. Bore tatum nonsequ issecte tat lum dipit nosto commod modolessi ex etum incilis molendrem incipit, quamcon ulputat.
8
Identity_design
Envelopes
eA5
C4
Vertex-Dental Asia Pte LtdThe Alpha #04-16 | Singapore Science Park II 10 Science Park Road | Singapore 117684
Johan van Oldenbarneveltlaan 623705 HJ Zeist | The Netherlands
9
Identity_design
With Compliments Card
Front
Reverse side
t > +31(0)306976749f > +31(0)306955188e >[email protected] > www.vertex-dental.com
JohanvanOldenbarneveltlaan62|3705HJZeist|P.O.Box10|3700AAZeist|TheNetherlands Premium Denture Solutions
With Compliments
Premium Denture Solutions
10
Presentations
Powerpoint template
First slide
Backside
Following slides
Dolesto er sumsandio conse feugiam
Dolesto er sumsandio conse feugiam
Consequat lum acilit venim nis alis dio consed esed
Henit ipit nim quis ercidunt:
– velis aliquisl ex elisl
– adio odignis diam illa ipit lore modo od
11
Brochures
Cover examples
Premium Denture Solutions
Quint Teeth Mould Chart
Academy
Premium Denture Solutions
Training program
VERTEX1038 Dental Academy Folder EN.indd 1 14-01-2011 16:58:32
12
Brochures
Reverse side examples
Vertex-Dental B.V.Johan van Oldenbarneveltlaan 62 | 3705 HJ ZeistPostbus 10 | 3700 AA Zeist | The NetherlandsTelefoon 030 - 69 76 749 | Fax 030 - 69 55 [email protected] | www.vertex-dental.com
Premium Denture Solutions
Combinated Articulations
Anteriors Posteriors
Upper Lower A B C D
M1 AL1 08 12 11 14
M2 AL2 08 13 11 14
M3 AL4 09 13 11 15
M4 AL7 09/10 13 11 15
R1 AL1 08 12 11 14
R2 AL2 07 13 11 14
R3 AL5 09 13 11 15
R4 AL6 09 13 11 15
R5 AL8 09 10 11 15
J1 AL1 08 12 11 14
J2 AL2 08 12 11 14
J3 AL3 09 13 11 15
J4 AL7 09/10 13 11 15
J5 AL8 09 10 11 15
Shades
Available in 16 shades and tones:
A1, A2, A3, A3.5, A4
B1, B2, B3, B4
C1, C2, C3, C4
D2, D3, D4
The dimensions are in millimeters.
Vertex Quint Teeth meet all the requirements of EN-ISO 22112:2006 and are not fluorescent.
Quint Synthetic Resin Teeth
Premium Denture Solutions
Vertex-Dental B.V.Johan van Oldenbarneveltlaan 62 | 3705 HJ ZeistPostbus 10 | 3700 AA Zeist | The NetherlandsTelefoon 030 - 69 76 749 | Fax 030 - 69 55 [email protected] | www.vertex-dental.com
Vertex-Dental B.V.Johan van Oldenbarneveltlaan 62 | 3705 HJ ZeistPostbus 10 | 3700 AA Zeist | The NetherlandsTelefoon 030 - 69 76 749 | Fax 030 - 69 55 [email protected] | www.vertex-dental.com
Premium Denture Solutions
13
Brochures
inside examples
Per colour, article series AVASP: 100g in colour 210,
220, 230, 240 and 250. Complete package, article
number AVASCOMPLEET: set 5 x 100g (including
needles, plugs and PE bottle).
Vertex™ Soft
Vertex™ Soft is a flexible denture soft lining acrylic
(heat-curing). Vertex™ Soft has an excellent
adhesion to both new and existing dentures. The
outstanding surface density makes the mate-
rial simple to finish and polish with the special
Vertex™ polishing instruments. Vertex™ Soft is for
temporary use. Soft base is educated at the Vertex
Dental Academy. Patients with continuous pain
problems because they are wearing a denture are
in most cases helped with a Vertex™ Soft liner.
Vertex™ Orthoplast
Vertex™ Orthoplast is a self polymerizing acrylic
for orthodontic appliances. Its unique grain
structure makes this acrylic suitable for the
spray-on technique. Vertex™ Orthoplast powder
is available in clear. In addition, an extensive
range of colours (18) incorporated in the liquid
is available.
Vertex™ Orthoplast
Vertex™ Orthoplast is a self polymerizing acrylic
for orthodontic appliances. Its unique grain
structure makes this acrylic suitable for the
spray-on technique. Vertex™ Orthoplast powder
is available in clear. In addition, an extensive
range of colours (18) incorporated in the liquid
is available.
Vertex™ Acrylic Stain
Vertex™ Acrylic Stain is used to give an indivi-
dual colour characterisation to full and partial
dentures. This acrylic is suitable for use in com-
bination with most denture base materials for
the pressing technique and the pouring techni-
que. The use of Acrylic Stain is educated during
the following courses; transferring a wax set-up
by using a pouring type of acrylic, high impact
acrylic in implant work and the authentic pres-
sing technique at the Vertex Dental Academy.
Vertex™ Divosep
Vertex™ Divosep is used for the separation of
acrylics to plaster and plaster to plaster. Divo-
sep is available in the following types/colours:
orange - pressing technique / red - pouring
technique / blue - universal use.
Powder, article series AVTNP: 500, 1000 and 2000g
in several colours. Liquid, article series AVTNV: 250,
500 and 1000ml.
Powder, article series AVSNP: 150, 500 and 1.000g.
Liquid, article series AVSNV: 75, 250 and 500ml.
Article series blue AVDSBL, article series red AVDSRO,
article series orange AVDSOR: 1000 and 5000ml.
7 » product range 2010 8 » product range 2010
Tray-, Orthodontic acrylics & Separation fluid Soft acrylic, Staining & Putty 1:1
Vertex™ Trayplast
Vertex™ Trayplast is a self polymerizing acrylic
for individual impression trays. This acrylic
can be polymerized in 10 minutes using the
MultiCure.
Powder, article series AVOPP: 200, 500, 1000, 2000,
4000, 10000 and 25000g. Liquid, article series AVOPV:
100, 250, 500, 1000, 2000, 5000 and 12500ml.
Powder, article series AVOPP: 200, 500, 1000, 2000,
4000, 10000 and 25000g. Liquid, article series AVOPV:
100, 250, 500, 1000, 2000, 5000 and 12500ml.
Durable and wear-resistant
This new product developed by Vertex-Dentalís R&D
depart ment combines five layers made of different combi-
nations of materials to construct a durable, wear-resistant
material on one side of the element and a material that
offers outstanding bonding with Vertex denture base
acrylics on the other side. For the denture base acrylics, we
recommend using Vertex Rapid Simplified for the pressing
technique, Vertex Castavaria or Vertex Castapress for the
casting technique and Vertex Implacryl for dentures fitted
to implants with bar and Dalbo structures.
Outstanding test results
The result is a successful combination of PMMA and DCL
materials without fillers, giving the element superior
characteristics when it comes to durability, wear-resistance
and bonding. These characteristics are borne out by
the outstanding test results. The Vertex Quint elements
demonstrate 40% less absorption (intake of moisture by
the material), 56% less discolouration by foods and higher
wear-resistance compared to the average test result for
well-known international tooth ranges.
International research
The Vertex Quint elements have been tested in accor-
dance with various international standards, such as ISO
22112:2005 “Artificial teeth for dental prostheses” and ISO/
TS 14569-2:2001 “Dental materials – guidance on testing
of wear”. In addition, they satisfy the various biocompati-
bility* tests, including cytotoxicity*, mutagenicity* (Ames
test), sensitivity and short-term toxicity. The stimulating
effect in the mouth has also been tested and the results
do not reveal any stimulation of the mucosa. These results
are supported by various studies conducted by renowned
dental research institutes, such as the NIOM in Norway.
Large range of Quint elements
The Vertex Quint elements are part of a range of models
that meet all everyday requirements. The range comprises
10 different male anterior upper forms, both athletic and
leptosomic, 4 female anterior upper forms (pyknic) and 8
anterior lower forms. In addition, there are 9 complete upper
and lower posteriors (7 form sets with an angle between 22
and 28 degrees and 2 sets with a 0 degree angle).
Boards with GTIN registration
The Vertex Quint boards feature the latest type of barcode,
the data matrix that ensures easy compliance with the
GTIN (Global Trade Item Number) registration of medical
devices, which will become compulsory in the future.
All the necessary data is recorded in this data matrix, such
as the item code, model, colour, batch number and expiry
date. These details can be scanned and added to the
patientís file, ensuring full traceability.
The diverse range of models means dental technicians
always have the right materials on hand to manufacture
the artificial tooth. There are 40 different boards in 16
different colours (A1 to D4).
Vertex-Dental, a globally active company with its
headquarters in Zeist, the Netherlands, has been a
leader in the area of innovative, customer-oriented
denture products for more than 70 years.
The company’s vision is to lead the market and be
regarded by dental professionals as the company that
sets the standard when it comes to premium denture
solutions that can be reliably worked.
We are proud to announce our latest innovation: Vertex
Quint, a completely new 5-layer range of acrylic teeth,
available in the following colours A1, A2, A3, A3.5, A4, B1,
B2, B3, B4, C1, C2, C3, C4, D2, D3, and D4.
Five-layer morphological construction
Through an innovative 5-layer morphological* construction
technique we have succeeded in giving diversity to the
element, resulting in a considerably richer perception of
colour. Vertex Quint elements are made up of five layers
with different opacities and cielab* values, rather than just
an opaque and a translucent layer. This generates a meta-
meric* effect in the element, as is seen with natural teeth.
With Vertex Quint elements, the highly prized chameleon
effect is achieved whether the denture is used in combi-
nation with natural teeth or as full dentures.
Comfort
Denture wearers no longer have the sensation of wearing
a prosthetic device, it is more like a copy of a natural
tooth, comparable to a constructed ceramic crown.
We believe the look is improved even further as the
element is constructed from the core outwards using
warm colour pigments, similar to those that occur
naturally. We have used slightly darker shades in the
cervical area of the elements. This ensures that the
element stands out less where it comes into contact with
the acrylic of the denture base.
Colour retain
Where lack of space is an issue, the dental technician
sometimes has to polish off part of the cervical or palatinal
side. In this case, the Vertex Quint retains its colour as
sufficient opacity* remains. Even in different lighting
conditions the Vertex Quint offers an extraordinary colour
match when compared to natural teeth.
Five layers of different materials
This new product developed by Vertex-Dentalís R&D
department combines five layers made of different
combinations of materials to construct a durable, wear-
resistant material on one side of the element and a
material that offers outstanding bonding with Vertex
denture base acrylics on the other side.
For the denture base acrylics, we recommend using
Vertex Rapid Simplified for the pressing technique, Vertex
Castavaria or Vertex Castapress for the casting technique
and Vertex Implacryl for dentures fitted to implants with
bar and Dalbo structures.
Premium Denture Solutions
Mammelons
The five layers
Occlusal surface
Anteriors
Vertex denture acrylics
Polished cervical edge
14
Brochures
inside examples
4
Pouring is becoming more and
more popular, because people
want a system that combines clean
work, speed and precision.
The Vertex pouring system
meets all these requirements.
This technique can be applied to
practically all dentures.
Subject matter
Positioning of wax model •Pouring the gel in the Castafl ask •Taking out the denture •Stabbing the pouring and •ventilation canals
Repositioning the teeth •
Pouring of the denture •Polymerization of the denture •Taking out and fi nishing •the denture
Objective
The objective of this course is not
only to give the student an idea of
all possibilities, but particularly that
also signifi cant cost savings can be
realized in the laboratory.
After completing the course, people
are able to implement and apply this
technique immediately in their own
laboratory.
Transferring wax denture with pouring acrylic
The acrylics produced for a denture
on implants must be of prime
quality. These acrylics must be
able to resist better to sudden
impacts that apply on dentures on
implants.
Subject matter
Fitting the matrix •Customizing the denture •Pressing with a High Impact acrylic •Polymerization of the denture •Finishing the denture •
Objective
The objective of this course is to
prevent breaking caused by lack of
space, occurring with combination
work.
High Impact acrylic on implant work
VERTEX1038 Dental Academy Folder EN.indd 4 14-01-2011 16:58:42
5
Pressing is a method known
by the denture department for
decades. Worldwide it still is the
most applied method. This course
is considered an exchange of
thoughts, but also as foundation of
the why.
The course includes the production
of complete models as well as
partial models. Attention is also
paid to the protection of the
modelation and the set up of the
teeth.
Subject matter
Fixing and embedding •of the denture
Applying the Vertex Putty •to protect the teeth
Separation •Preparing the acrylic •Individually colouring of the acrylic •Trial pressing and pressing •of the prosthesis
Polymerization of the prosthesis •Finishing the dentures •
Objective
The objective of this course is to be
able to work predictably to achieve a
fi nal result of the highest quality.
Authentic pressing method
The frame denture is a standard
element at the denture
department. Processing acrylic
is done in many different ways
worldwide. We consider it our duty
to get the students acquainted
with the various options there are
to manufacture a frame denture.
One of the options is to work with
a Vertex Putty slot and another
way is to apply the pouring
technique. Even colouring the
frame denture can be done.
Subject matter
Making Vertex Putty •slots in various ways
Placing back the teeth •in the Vertex Putty
Separation •Pouring of the moulds •Finishing the frame prosthesis •
Objective
The objective of this course is to
manufacture, in a controlled way, the
frame denture in various ways, with
a predictable fi nal result.
Using acrylics on frames
VERTEX1038 Dental Academy Folder EN.indd 5 14-01-2011 16:58:44
Premium Denture Solutions
Quint Synthetic Resin Teeth - Lower Anteriors
Quint Synthetic Resin Teeth - Posteriors Quint Synthetic Resin Teeth - Upper Anteriors
Tapering
R1
41.8 9.9 8.1
R2
43.2 10.5 8.4
R3
47.0 10.7 8.4
R4
48.5 10.9 8.9
R5
50.1 13.0 9.5
AL1
32.1 8.2 4.7
AL2
34.8 8.5 5.2
AL3
34.6 9.4 5.0
AL4
35.8 9.4 5.7
AL5
37.4 9.0 5.7
AL6
38.1 9.6 5.7
AL7
38.8 11.3 5.6
AL8
39.0 10.7 6.0
12
28.0 7.6 30.0 6.9
13
30.0 9.6 31.5 7.5
14
30.5 9.2 31.2 8.8
15
32.8 10.2 33.5 9.4
07
29.9 8.6 31.8 8.2
11
30.3 8.5 33.5 7.4
08
29.1 8.5 31.6 8.0
09
31.8 9.1 34.3 8.7
10
34.1 9.7 36.6 9.1
Square
M1
41.3 8.4 8.0
M2
43.5 9.8 8.3
M3
46.0 10.3 8.7
M4
46.3 10.8 8.8
Ovoid
J1
41.8 9.0 7.6
J2
42.7 9.4 7.8
J3
46.3 9.6 8.6
J4
46.4 10.3 8.8
J5
52.0 12.5 9.8
08
11
R5
50.1
13.0
9.5
29.1
31.6
30.3
33.5
8.5
7.4
8.5
8.0
Alldimensionsareinmillimeters
Alldimensionsareinmillimeters
Alldimensionsareinmillimeters
15
Leaflets
examples
Premium Denture Solutions
Vertex-Dental iPhone® app
Nu Gratis iPod Touch® bij Vertex™ Quint Teeth*
IDS 2011PRIMEURBestellen met de iPhone® app van Vertex-Dental
Vertex-Dental presenteert een app voor de Apple® iPhone®, iPod Touch® en iPad®.
Om Vertex-Dental producten te bestellen hoeft u alleen nog maar de QR-code te scannen.
En dat is nu wel héél aantrekkelijk, want bij bestelling van Vertex™ Quint Teeth t.w.v.
€ 1.000,- ligt er voor u een gratis iPod Touch® klaar. Om direct de nieuwe app te gebruiken.
Vertex-Dental heet u van harte
welkom in de stand!
Hal 10.1 - stand nr C068 - C069
* alleen geldig op onze stand tijdens IDS 2011, 22 -26 maart 2011. Apple, iPhone, iPad en iPod touch zijn geregistreerde handelsmerken van Apple.
VERTEX1104 iPod Touch leaflet [3].indd 1 02-03-2011 16:04:07
Premium Denture Solutions
Casting System
VERTEX1037 sheets [7].indd 11 04-02-2011 14:37:19
Vertex-Dental B.V.Johan van Oldenbarneveltlaan 62 | 3705 HJ ZeistP.O. box 10 | 3700 AA Zeist | The NetherlandsTel. +31 (0)30-69 76 749 | Fax +31 (0)30-69 55 [email protected] | www.vertex-dental.com
Vertex™ Quint teeth Advantages of the Vertex™ teeth Quint:Excellent bonding characteristics with Vertex™ Denture
Base AcrylicsWide range of models
Available in A1 until D4 colour classifi cation
Innovative 5 layer concept
Easy to grind with cervical consistent color ceramic effect
Double cross linked and a high molecular weight
Vertex™ TCA Vertex™ TCA is a cold-curing teeth coloured acrylic, which can be used for restorations to dentures and frames where an element must be renewed, repaired or permanently fi xed.Available in 9 different shades: A2, A3, A3.5, B2, B3, C2, C3, D2, D3.
Vertex™ TCA can be used as well as temporary crown made by Dental technicans.
Acrylic Teeth
Premium Denture Solutions
The following products are related to the Acrylic Teeth:
Vertex™ Quint shade guideShows the real life 16 available shades from A1 – D4.
Vertex™ Quint cabinetThis 8 tray solid Cabinet is made out of high quality wood with inlays for anteriors and posteriors.
Vertex™ Teeth grinderIs specially meant to enlarge the contact surface of resin teeth.
Vertex™ AcrybondCreates a chemical bonding between denture base acrylics and acrylic teeth.
VERTEX1037 sheets [7].indd 2 04-02-2011 14:36:08
16
Internet
examples
17
Communication_Materials
Advertisments
18
Premium Denture Solutions
● Detachable tray with a black out front● Switch can be set at 5 or 10 minutes curing time● High intensity and short polymerisation time● Suitable for Vertex Light Curing Trayplates
(also base plate and registration plate)
Vertex™ Eco Light Box
Vertex™ Light Curing TrayplatesVertex™ Eco Light Box
[email protected] | www.vertex-dental.com
VERTEX10?? adv Eco Light Box 2.indd 1 20-12-2010 16:24:33
Enthousiaste en gedreven topper gezocht
Vertex™ is wereldwijd in meer dan 80 landen een synoniem voor Premium Quality en betrouwbaarheid en produceert en verkoopt al ruim 70 jaar kwaliteitsproducten voor tandtechnische laboratoria over de gehele wereld. Ter versterking van ons sales team zoeken wij een:
Medewerker Verkoop BinnendienstHet betreft een fulltime functie voor de afdeling Sales & Marketing
De functie:Je werkt intensief samen met de klant (nationaal & internationaal), beoordeelt de orders, maakt de planning en draagt zorg voor transport en facturatie. Daarnaast geef je ondersteuning aan de Area Sales Managers.
Onze verwachtingenHBO, net afgestudeerd of MBO niveau met relevante werkervaring; afgeronde tandtechnische opleiding of tandtechnische kennis is een pre; goede beheersing van de Engelse- en een additionele vreemde taal; accuratesse; teamspeler; verantwoordelijkheidsgevoel; affiniteit met automatisering; klantgericht en commercieel.
Ons aanbodEen internationaal georiënteerd, informeel bedrijf; werken in een professioneel team; uitstekende secundaire arbeidsvoorwaarden, waaronder goede opleidingsfaciliteiten, een bonusregeling en een premievrij pensioen;aandacht voor persoonlijke ontwikkeling.
Is je interesse gewekt, dan kan je voor reacties, sollicitaties of meer informatie terecht bij Jan Willem Carelse, Manager Sales & Marketing, [email protected].
Vertex-Dental B.V.
Johan van Oldenbarneveltlaan 62 | Postbus 10 | 3700 AA Zeist | T: 030 – 697 67 59 | [email protected] | www.vertex-dental.com
Premium Denture SolutionsVERTEX1009 Personeelsad.indd 1 25-03-2010 10:04:22
Premium Denture Solutions
● Uitstekende hechtingseigenschappen● Uitgebreid assortiment in de kleuren A1 t/m D4● Innovatieve 5-laags opbouwtechniek● Behoud van kleur bij het slijpen● Duurzaam, slijtvast en kleurstabiel
Vertex™ Quint tandenlijn
Innovatieve 5-laags opbouwtechniek
[email protected] | www.vertex-dental.com
VERTEX1041 adv Quint tanden [2].indd 1 01-11-2010 11:54:29
Communication_Materials
Poster
Premium Denture Solutions
vertex-den
tal.com Hot-curing acrylics, 4 flasks, 100 °C
Rapid Simplified, Regular, Implacryl & Soft
Cold-curing acrylics, 3 flasks, 55°C, 2.5 BarCastapress, Castavaria, Implacryl Cold, Castaquick, Self-Curing & Trayplast
Orthodontic acrylics, 9 models, 55°C, 2.5 BarOrthoplast
Crown & Bridge acrylics, (minimum) 93°C,6.0 Bar
Vertex MultiCure
19
Images
Photography
20
These images and many others can be downloaded in high resolution on our website:
www.vertex-dental.com/service-portal/images
Images
Photography
21
Premium Denture Solutions
Vertex-Dental B.V.Johan van oldenbarneveltlaan 62 | 3705 hJ ZeistPostbus 10 | 3700 AA Zeist | The NetherlandsTelefoon 030 - 69 76 749 | Fax 030 - 69 55 [email protected] | www.vertex-dental.com