DESIGN APPLICATIONS Platinum Temperature … APPLICATIONS T5...
Transcript of DESIGN APPLICATIONS Platinum Temperature … APPLICATIONS T5...
D E S I G N A P P L I C A T I O N S
T5 Trend WaTch: MaTerials & asseMbly / a suppleMenT To design neWs AuGuST 2013 [www.designnews.com]
C
Materials & asseMbly
Platinum Temperature Sensor TechnologyThis article explores the inherent properties of platinum temperature sensors, the types of platinum RTD elements available, and typical applications.By BoB Gliniecki, HeraeuS SenSor TecHnoloGy uSa
Cars, trucks, appliances, climate control systems, industrial processes, and life science instruments all have in common the need for temperature measure-ment. Platinum resistance temperature detector (RTD) elements are specifically designed for the precise temperature measurements required by these, and dozens of other applications. This article explores the inherent properties of platinum temperature sen-sors, the types of platinum RTD elements available, and typical applications.
Platinum as a Temperature SensorA platinum RTD element is a thermal resistor — a resistor with a value that changes by a predictable amount in response to temperature changes. Plati-num RTD elements have a positive temperature coefficient (PTC), meaning the resistance increases with increasing temperature. A virtually linear change in resistance, coupled with intrinsic chemical and temperature resistance, makes platinum an ideal base material for temperature sensing. Used in tem-
Thin-flm platinum RTD elements with lead wires.
ES293946_DN1308_T5.pgs 08.01.2013 22:25 UBM blackyellowmagentacyan
MAKING THE CASEFor Solon, Ohio machine shop SRPM,
Inc, Sapa Aluminology™ means:
10% longer tool life
Improved consistency
Better chip control
Enhanced machining performance
More aggressive speeds
10% improved recovery
Better surface fi nish
Sapa ACC-U-LINE™ rod and bar product, available
from Sapa Premier Distributor Partners, is specially
engineered for high quality machining. Precision
machining company SRPM Inc. learned fi rsthand
the difference between Sapa ACC-U-BAR and
competitor product.
An ISO9001 certifi ed facility, SRPM produces
parts for everything from medical equipment to
aerospace components. Accuracy and consistency
are of the utmost importance, and they agree that
Sapa ACC-U-LINE rod and bar
products offer better performance in
their high speed multi-axis machining
centers. With Sapa product, SRPM can
achieve ultimate dimensional precision
and better chip control. This has resulted
in 10% longer tool life and a more profi table outcome for the
company. ACC-U-BAR allows SRPM to leverage more aggressive
cutting speeds and feeds.
ACC-U-LINE is a product of Sapa Aluminology™, which utilizes
Sapa’s Indirect Extrusion press technology reducing the frictional
heat generated during extrusion, resulting in rod, bar and hex
products that have more consistent grain structure, tighter
dimensions and higher mechanical properties. Our Application
Engineers and Metallurgists have the skill to create aluminum
product extrusions for any industry, and with locations around the
globe Sapa expertise in aluminum extrusion is truly unsurpassed.
It’s What’s Inside That Counts!
ACC-U-LINE Core Competitor’s Core
BETTER BARMAKES A DIFFERENCE
800-233-3165 | www.sapagroup.com/NA
ES294185_DN1308_T6_FP.pgs 08.01.2013 23:25 UBM blackyellowmagentacyan
360° Metal-to-
Metal Contact
Pre-assembled embedded
O-ring seals in asymmetrical
groove – Patent No. 3,175,454
Seals liquids & gases to
20,000psi internal/external
Self-sealing screw, bolt, nut &
rivet versions
Temperature range from -160°F to
+500°F (-106°C to +260°C)
Tested to UL Standard 50,
Types 1-13
Optional threadlocking
Self-sealing washers seal
to 100psi. Metric & inch.
Made in U.S.A.
C®
USUL Recognized
800.498.9034www.apmselfsealingfasteners.com
View Video
WHEN JUST FASTENING ISN’T ENOUGH®
BETTER FASTENER
SEALING
WITHOUT
CHEMISTRY
Seal and fasten in one step with a reusable,self-sealing fastener. No liquid adhesive/sealants…no worries about waste disposal or respiratory safety.
T7 Trend WaTch: MaTerials & asseMbly / a suppleMenT To design neWs AuGuST 2013 [www.designnews.com]
Structural Adhesive Resists High Temperatures
www.masterbond.com
+DFNHQVDFN1-86$ììPDLQŴPDVWHUERQGFRP
Master Bond Supreme 45HTQToughened, quartz filled epoxy
Serviceable from -60ºF to 450ºF
Superior durability and chemical resistance
High compressive strength
Materials & asseMbly
perature sensing since the early 1900s, platinum has a long history of use in precision temperature measurement applications.
The elemental properties of platinum contribute to several characteristics ben-eficial to temperature sensing.
High Precision: Strict controls on platinum RTD element manufacturing processes and raw materials minimize deviations from the ideal resistance vs. temperature response, resulting in high sensor precision.
High Signal Resolution: A relatively high (approximately 3900ppm) change in resistance vs. temperature provides good signal resolution. Choosing an element resistance higher than the stan-dard Pt100 (100Ω), such as Pt1000 (1000Ω), Pt2000 (2000Ω), or Pt10k (10000Ω), further enhances resolution by increasing the ohms/°C response to temperature variation.
Wide Operating Temperature Range: Platinum RTD elements are available for operation within the tem-perature range of -196C to 1000C.
Long-term Stability: The typical
long-term drift of thin-film platinum RTD elements is 0.04 percent maxi-mum after 1,000 hours at 500C.
Interchangeability and Standard-ization: The IEC 60751 specification
SMD elements.
ES295740_DN1308_T7.pgs 08.05.2013 21:46 UBM blackyellowmagentacyan
Meet the world’s most dynamic composites players and develop your business faster
DESlGN & PROCESS EFFlClENCY
AUTOMOTlVE
State of honor
Country of honor
CALlFORNlA
CANADA
` TRADE SHOW & DEMO ZONE
` l.C.S. / CONFERENCES
` BUSlNESS MEETlNGS
` COMPOSITES TOUR
` lNNOVATION AWARDS & SHOWCASE
` TECHNlCAL SALES PRESENTATlONS
` JOB CENTER
The No1 Composites Network in the World
Boston Convention & Exhibition Center
Get your free access badge online at: http://www.jeccomposites.com/badgesjam
[www.designnews.com] AuGuST 2013 Trend WaTch: MaTerials & asseMbly / a suppleMenT To design neWs T8
defines the requirements, tolerance classes, and resistance vs. temperature function for platinum RTD thermom-eters made with a platinum element hav-ing a temperature coefficient of 3.851 x 10-³ °C-¹, commonly expressed as “TC3851,” “TC3850,” or “3850ppm.” The defined tolerance classes allow for interchangeability between two elements of the same resistance value. Other available temperature coefficients include 3750ppm, 3770ppm, and 3916ppm.
Linearity: The resistance vs. tempera-ture relationship for a platinum RTD element can be described by the follow-ing polynomial:
Rt = R₀(1+at+bt2)where R₀ is the resistance at 0C, t is
temperature t, a and b are experimen-tally derived constants, and Rt is the resistance at temperature t.
The value for b is so small that for
most applications a linear relationship between temperature and resistance may be assumed. The linearity simpli-fies signal processing, and minimizes measurement error.
Platinum RTD Sensor Manufacturing ProcessTwo major types of platinum RTD temperature sensors are available: thin-film (including surface-mount device, or SMD) and wirewound sensors. As the respective names imply, thin-film elements are manufactured via thin-film photolithography, while wire-wound sensors are constructed from a precision-wound platinum wire.
Thin-Film Elements
Thin-film platinum RTD elements are manufactured via a process similar to processes used by the semiconduc-tor industry. A thin-film platinum layer is deposited on a specially pre-
pared aluminum oxide substrate. The platinum layer is then structured using photolithography techniques, a protec-tive glass layer is added, the resistance value is calibrated via laser trimming, and, finally, lead wires and a protective glass-ceramic seal is added. By varying the materials and processes, thin-film elements for both cryogenic and high-temperature (>1000C) operation are possible.
SMD RTD Elements
The manufacturing process for SMD RTD elements shares most of the steps of the thin-film manufacturing process. But instead of connection lead wires, the SMD element has soldering pads for electrical contact.
Wirewound Elements
Two major types of wirewound platinum RTD elements are available: ceramic wirewound and glass wire-wound. Glass wirewound elements,
ES293949_DN1308_T8.pgs 08.01.2013 22:25 UBM blackyellowmagentacyan
T9 Trend WaTch: MaTerials & asseMbly / a suppleMenT To design neWs AuGuST 2013 [www.designnews.com]
Materials & asseMbly
which are constructed from a precision platinum coil wound on a glass mandrel and sealed with glass, are a small fraction of the wire-wound elements produced.
Ceramic wirewound ele-ments are constructed using two primary methods:
Mandrel-wound: Man-drel-wound elements are constructed by winding a coil of platinum wire around a ceramic mandrel, and sealing with a ceramic coating.
Bore-hole construction: In the more widely used bore-hole construction, a preci-sion wound platinum wire coil, with connection leads attached, is inserted into pre-cisely dimensioned holes in a ceramic cylinder.
The mandrel-wound construction offers better resistance to vibration vs. bore-hole constructed wirewound ele-ments. The bore-hole design, however, allows for tight accuracy over a very wide temperature range, and minimal hysteresis, compared to mandrel-wound types.
Thin-Film vs. Wirewound—What RTD Element Should Be used?With the development of the wire-wound element in the early 1900s, and the ceramic insulated wirewound element in the 1950s, wirewound ele-ments were the RTD sensor of choice for much of the 20th century. After the thin-film platinum RTD element was developed in the 1970s, gradually, thin-film elements were selected over wirewound elements for a majority of applications. The solid-state construc-tion of the thin-film element provides excellent shock and vibration resistance and miniaturization. Coupled with lower cost (compared to a wirewound element) and good stability, the thin-film element delivers a balance of per-formance and economy. In the recent past, the lower maximum temperature rating of thin-film elements required the use of wirewound elements in some applications that were otherwise suitable for thin-film elements. The development of thin-film elements with maximum temperature ratings of 750C, 850C, and 1,000C, enables the use of thin-film elements in applica-tions formerly reserved for wirewound elements.
For new applications, a wirewound element may be chosen over a thin-film element if superior stability, higher power capability, resistance to self-heating, and high accuracy over a wider temperature range is required. In addi-tion, several older applications were de-veloped and qualified with wirewound elements. The potential cost savings realized by switching to a thin-film element are far outweighed by the cost of requalification with a thin-film element.
Ceramic wirewound platinum RTD elements.
TOWER
Manufacturing Corporation25 Reservoir Ave, Providence, RI 02907
401-467-7550 fax 401-461-2710www.towermfg.com
Design for SAFETY with a TOWER
GFCI• Our GFCI’s provide electrical
shock protection for a wide range of industrial products
• We design Ground Fault Circuit Interrupters so you can easily build them into your production line, and.
• We also offer 15 and 20 amp GFCI cord sets in lengths of 1 ft. to 100 ft.
We customize to meet your specs. Our Asian plant keeps you competitive. Our US headquarters assures quick, dependable service.
For more information [email protected].
ES293945_DN1308_T9.pgs 08.01.2013 22:25 UBM blackyellowmagentacyan
Others say they’re FAST...
Proto Labs’ entire operation is optimized to deliver quick-turn CNC
machined and injection molded parts in as fast as one business day.
We manufacture parts every day for thousands of customers, many of
whom come to us at the last minute with dozens of designs they need
to test ASAP. Since 1999, we’ve produced tens of thousands of molds,
and shipped tens of millions of parts to our customers all over the world.
Sure, it’s our technology that allows us to make your parts faster
than anyone else. We back it up with large-scale global manufacturing
facilities with hundreds of CNC machines and injection molding presses
on three separate continents.
Whether your project calls for a few machined parts or thousands of
molded parts from 50 dif erent designs—we have the scale to meet your
needs. Every time!
But do they have the
to deliver?SCALE
ISO 9001:2008 Certifi e • ITAR Registere
Call 877.479.3680
or visit www.protolabs.com
Puzzled by
resin choices?
Request your FREE Resin
Puzzle — nine of the most
common thermoplastics used
in injection molding. Visit
www.protolabs.com/parts to request your design aid.
Enter code DN13B.
Check out our virtual tour!
© 2013 Proto Labs, Inc
Visa/Mastercard Accepted
ES294740_DN1308_T10_FP.pgs 08.02.2013 05:38 UBM blackyellowmagentacyan
[www.designnews.com]www.masterbond.com
Bond Porous and
Non-Porous Surfaces
Adhesive/Sealant EP21 Epoxy System
ì Forgiving one to one mix ratio
ì Outstanding physical strength properties
ì Chemically resistant
ì Superior durability
Hackensack, NJ 07601 USA
+1.201.343.8983
versatility by design
Typical Platinum RTD Element PackagesTypical platinum RTD element packages include thin-film, SMD, and wirewound types. Each package is suitable for specific applications and operating conditions.
Thin-film platinum RTD ele-ments with lead wires feature:
• Low cost
• High stability
• High vibration resistance
• Small size
• Fast response time
• Solderability and weldability
• Wide choice of sizes
• Wide choice of resistance values:
Pt100, Pt200, Pt500, Pt1k, Pt2k, Pt10k, and others
• Temperature capability from
-196C to 1,000C
SMD elements feature:• Pick-and-place compatibility
• 1206, 0805, and 0603 packages
• Small size
• Fast response time
• Wide choice of resistance values:
Pt100, Pt1k, and Pt10k• Typical operating temperature
range from -50C to 150C
Ceramic wirewound platinum RTD elements feature:
• Very high stability
• Wide variety of sizes
• Operating temperature range
from -200C to 850C• Availability in resistance values
up to 500Ω
Platinum RTD Element Areas of ApplicationTransportation: Increasingly
stringent environmental regulations for all vehicles, and in particular, diesel-powered vehicles, have led to the development of unique tech-nologies for emission reduction. Platinum thin-film elements with high-temperature capability are used to measure temperature in a variety
Oven applications for thin-flm platinum RTD elements.
ES293950_DN1308_T11.pgs 08.01.2013 22:25 UBM blackyellowmagentacyan
[www.designnews.com]
See us at Booth #1451
Chicago Design & Manufacturing Midwest Show
of locations in the exhaust sys-tem, including the EGR (ex-haust gas recirculation) system, exhaust pipe, catalyst bed, and diesel particulate filter (DPF). Lower-temperature automo-tive applications for platinum thin-film elements include oil temperature, oil quality, and intake mass air flow sensors.
Appliances: Thin-film plati-num RTD elements are used in several appliance applica-tions, glass-ceramic cooktops, electronic oven controls, and pyrolysis (burn-off ) control in self-cleaning ovens.
Electronics: Interconnects, such as copper conductors, and other components, such as sensors, increase in resistance in response to increasing temperature. In order to maintain the accuracy of high-precision circuits, it is necessary to compensate for this increase in resistance. Pick-and-place mountable SOT223, TO-92, and SMD package RTD elements are used to provide precise circuit temperature compensation. In addition to tempera-ture compensation, board-mountable RTD elements are also used for precise temperature control in energy manage-ment systems.
Process Technology: Chemical and petrochemical processes require a precision temperature sensor that is re-sistant to thermal shock, pressure, and other stresses associated with complex, large-scale chemical processing. Both thin-film and wirewound platinum RTD elements with temperature rat-ings of 600C and 850C are available to meet the needs of the process industry.
Life Sciences: In addition to sen-sitivity to a specific parameter, many in vitro diagnostics, such as personal blood glucose meters, are temperature-sensitive. As a result, temperature com-pensation is often required to maintain the accuracy of the measurement. Platinum RTD elements are used for precision temperature compensation.
An extension of platinum thin-film temperature sensing technology is the multi-sensor platform chip (MSP)
concept. Fabricated using thin-film platinum structuring techniques, in addition to containing a temperature sensor, the multifunction chip may also include a heater, capacitive inter-digitated electrode structure, and other active sensing layers, including pH
and 02 sensors. This chip provides the foundation for precision gas or mul-tiple parameter sensor systems, includ-ing chemical sensors, and cell vitality sensors
Versatility of PlatinumThe key properties of temperature and chemical resistance, and ease of fabri-cation make platinum an ideal choice for precision temperature sensing in both typical and harsh environments. A wide variety of styles and configura-tions provide the designer with a wide selection of sensors. A linear response to temperature, standardized response curves, and simple connection meth-ods make platinum sensors easy to use. In response to market demand, platinum RTD sensor manufacturers continue to advance the technology with higher-temperature ratings and thin-film sensors with multiple func-tion capability.Bob Gliniecki is the product manager at Heraeus Sensor Technology USA. To see the full version of this articles, go to http://bit.ly/132wKa1.
Multi-sensor platform chip.
ES293948_DN1308_T12.pgs 08.01.2013 22:25 UBM blackyellowmagentacyan