Desfibrilador Defimax

2

Click here to load reader

Transcript of Desfibrilador Defimax

Page 1: Desfibrilador Defimax

Defi brillator

Page 2: Desfibrilador Defimax

GENERAL PARAMETERSPower supply 100 – 240 VAC 50/60 HzBattery 12 VSafety class I, CF, BFSafety requirements MDD: 93/42/EEC 2007/47/EC EN 60601-1 EN 60601-1-2 EN 60601-2-4Weight 6.0 kg without paddlesDimensions 298x312x260 mmAccordance with ILCOR 2005reanimation guidelines

MODESManual modeCardioversion modeAED modeMonitoring modePacer modeService mode

DISPLAYDisplay type 6.5” LCD TFT Colour Resolution 640x480 pixelsPresentation of digital values

MONITOR MODULENumber of channels 4Sweep speed 3.125 to 50 mm/sTrends 6 hArchive 6 hEvents 500Alarms for parameters

ECG MODULELeads I, II, III, aVR, aVL, aVF, VnCMRR >100 dBFrequency range:Diagnostic 0.05 to 100 HzMonitoring 0.5 to 40 HzPaddles 1 to 25 Hz Sensitivity 2.5 – 40 mm/mVHR range 15 – 300 bpmQRS signaling acoustic and opticalInput protected against defi brillatorand high frequency disturbance

NIBP MODULEMeasuring range of transducer 10 – 300 mm HgMeasuring mode manual, auto or STAT Auto-mode repetition time 1 – 480 min

DEFIBRILLATOR MODULE

Manual and Cardioversion modeElectrodes type disposable or reusable adult and pediatricImpulse type biphasic, current limitedEnergy range 1 to 300 JCharging time <10 s for 300 J

AED mode (option)Electrodes type disposableImpulse type biphasic, current limitedAdvising system during defi brillation

PACER MODULE (option)Impulse shape monophasicMode On Demand and Fixed RateOutput Current 0 to 200 mAPacing Rate 30 to 180 1/minImpulse width 5 to 40 ms

SpO2 MODULE Nellcor OxiMax® (option)Measuring range 0 – 100%Accuracy 70% – 100% 2 digitsAccuracy 60% – 80% 3 digitsPulse rate 20 – 300 bpmMotion and low perfusion tolerantAcoustic saturation signalingPlethysmographic wave presentation

SIGNAL OUTPUT (option)ECG signal output 1 Vpp

THERMAL RECORDERPaper size 57 mmMode auto/manualNumber of channels 2Sweep speed 25 and 50 mm/sPrintout length 15 s

Technical Parameters

EMTELZamkowa 141-803 Zabrze, POLANDphone +48 32 271 90 13fax +48 32 271 57 [email protected]

MANUFACTURER:

Emtel reserves the right to make changes to this sheet and the product at any time without notice.

Project co-fi nanced by the European Union from the European Regional Development Fund under the Regional Operational Programme within the framework for the Silesian Voivodeship for the years 2007-2013