DESCRIPTION OF ITEM UNIT QTY. RATE (RS.) AMOUNT (RS.)...

S.NO DESCRIPTION OF ITEM UNIT QTY. RATE (RS.) AMOUNT (RS.) Comments

ELECTRICAL WORKS

1 Supply, installation testing and commissioning of outdoor pole mounted weatherproof lighting fixture IP-66 with 42 watt LED light fixture

with LED Driver, color – graphite, CE certified, IK08, magenta color dichronic filter, outer drum with foliage mesh pattern, with all

necessary mounting accessories suitable for pole mount, CRI - >80, lamp color – 3000K, lumen output - >110 lumer per watt, symmetrical

beam, lamp life- 50000 hrs and 5 year warranty etc complete as required similar to Schreder cat no: Boreal (Approved make: PHILIPS,

DW WINDSOR, GHISAMESTIERI, SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX)

Each 55

2 Supply, installation testing and commissioning of outdoor type bollard 1000 mm height weatherproof lighting fixture IP-66 with 30watt

LED light fixture with LED Driver, color – graphite, CE certified, IK08, CRI - >80, lamp color – 3000K, lumen output - >110 lumer per watt,

lamp life- 50000 hrs and 5 year warranty etc including foundation, civil works etc complete as required similar to DW windsor vector

(Approved make: PHILIPS, DW WINDSOR, GHISAMESTIERI, SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX)

Each 100

3 Supply, installation testing and commissioning of outdoor type Spike type weatherproof lighting fixture IP-66 with 9 watt LED light fixture

with LED Driver, beam angle 36, CE certified, IK08, CRI - >80, lamp color – 3000K, lumen output - >110 lumer per watt, lamp life- 50000

hrs and 5 year warranty etc including foundation, civil works etc complete as required similar to beach side L011 (Approved make:

PHILIPS, DW WINDSOR, GHISAMESTIERI, SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX)

Each 197

4 Supply, installation testing and commissioning of outdoor type buried type weatherproof lighting fixture IP-66 with 3 watt LED light fixture

with LED Driver, beam angle 15, CE certified, IK08, CRI - >80, lamp color – 3000K, lumen output - >110 lumer per watt, lamp life- 50000

hrs and 5 year warranty etc including civil works etc complete as required. (Approved make: PHILIPS, DW WINDSOR, GHISAMESTIERI,

SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX)

Each 200

5 Supply, installation testing and commissioning of weatherproof lighting fixture IP-66 1x1 watt LED light fixture with driver, light system

manager lamps, DMX controller including all power wiring, control cabling etc complete as required as Philips Cat no. I Color Flex MX

(Approved make: PHILIPS, DW WINDSOR, GHISAMESTIERI, SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX)

Each 2500

6 Supply, installation testing and commissioning of weatherproof lighting fixture IP-55 1x28 watt T-5 lighting fixture with ballast, lamps etc

complete as required as Pierlite Cat no. Austube 75 Handrail IP55 (Approved make: PHILIPS, DW WINDSOR, GHISAMESTIERI,

SCHREDER, TECHNILUM, HEPER, FIVEP, TRILUX, AUSTUBE, PIERLITE)

Each 60

7 Supply, installation, testing and commissioning of 300 Watt LED flood light with asymmetrical distribution IP-65 with ballast, CRI>70,

lamp color-6000 K, lumen out put>120 lumen per watt, lamp life 50,000 hrs and 5 years warranty etc complete as required similar to

Elkhona GFL300 (Approved make: PHILIPS, BAJAJ, ELKOHA, LIGHTING TECHNOLOGIES, PIERLITE)

Each 22


lamp color-6000 K, lumen out put>120 lumen per watt, lamp life 50,000 hrs and 5 years warranty etc complete as required similar to

Elkhona GFL150 (Approved make: PHILIPS, BAJAJ, ELKOHA, LIGHTING TECHNOLOGIES, PIERLITE)

Each 12


lamp color-6000 K, lumen out put>120 lumen per watt, lamp life 50,000 hrs and 5 years warranty etc complete as required. (Approved

make: PHILIPS, BAJAJ, ELKOHA, LIGHTING TECHNOLOGIES, PIERLITE)

Each 48

10 Supply, installation, testing and commissioning of 15 meter high street light pole as per IS made of GI sheet, including, junction box,

cable termination with MCB, foundation, all civil works including excavation etc, wiring from junction box till the luminare complete as

required. (Approved make:VALMONT, NEZONE, TRANSRAIL, BAJAJ, ABACUS)

Each 4

SCHEDULE OF QUANTITIES FOR PROPOSED BEAUTIFICATION WORKS AT MORABADI GROUND, RANCHI

Beautification of Morabadi Ground- Phase-II 1 Meinhardt Singapore Pte. Ltd.



11 Supply, installation, testing and commissioning of 4 meter high ornamental street light pole as per IS made of MS sheet, including,

junction box, cable termination with MCB, foundation, all civil works including excavation etc, wiring from junction box till the luminare

complete as required as per detailed specifications (Approved make:VALMONT, NEZONE, TRANSRAIL, BAJAJ, ABACUS)

Each 71

12 Supply, installation, testing and commissioning of 15 Watt LED recessed down light with IP-20 with ballast, CRI>80, lamp color-6000 K,

lumen out put>120 lumen per watt, lamp life 50,000 hrs and 5 years warranty etc complete as required. (Approved make: PHILIPS,

BAJAJ, ELKOHA, LIGHTING TECHNOLOGIES, PIERLITE)

Each 962

13 Supply, installation testing and commissioning of outdoor type Spike type uplighter weatherproof lighting fixture IP-66 with 20 watt LED

light fixture with LED Driver, beam angle 36, CE certified, IK08, CRI - >80, lamp color – 3000K, lumen output - >110 lumer per watt, lamp

life- 50000 hrs and 5 year warranty etc including foundation, civil works, protective steel works for vandal resistant yet accessible etc

complete as required similar to beach side L011 (Approved make: PHILIPS, DW WINDSOR, GHISAMESTIERI, SCHREDER,

TECHNILUM, HEPER, FIVEP, TRILUX)

Each 40

14 Supply, installation, testing and commissioning of 1200 mm dia ceiling fan with regulator 5 star BEE rated complete as required. (

Approved Make: CROMPTON GREAVES, USHA, POLAR, BAJAJ, HAVELLS) Each 170

15 Supply, installation, testing and commissioning of 300 mm exhaust fan with louvers, bird guard complete as required. ( Approved Make:

CROMPTON GREAVES, USHA, POLAR, BAJAJ, HAVELLS)\ Each 172

16 Supply, installation, testing and commissioning of 2TR Split unit Air conditioner, including all copper piping, control wiring, civil works,

supports for indoor and outdoor units, \BEE 5 star rated complete as required ( Approved Make: DAIKIN, TOSHIBHA, OGENERAL,

MITSUBISHI) Each 2

17

Supply of indoor type surface mounted Linear LED fitting white CRCA powder coated with total system wattage 18-20W covered by

PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories

suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy

>=100 lm/W and minimum system lumens 2000. Similar to PHILIPS-BN021 LED 20S PSU CDLGR Each 581

18

Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 14-15W

covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all

accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have

minimum efficacy >=105 lm/W and minimum system lumens 1500. Similar to Philips-SM251C LED 15S-6500 PSU WH Each 61

19

Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 10-12W

covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all

accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have

minimum efficacy >=100 lm/W and minimum system lumens 1200. Similar to Philips-SM250C LED 12S-6500 PSU WH Each 53

20

Supply of LED Bulkhead luminaire, Vandal resistant Polycarbonate diffuser with IP 65, IK08 dust tight and water Jet proof for clean

operation with total system wattage 9-10W and system lumen >600 lm, luminaire efficiency of luminaire not less than 55 lm/w. Similar to

Philips-WT202W LED6S CW PSU S2 PC Each 97

21

Supply of 5 star rated 1200mm sweep ceiling fan, ISI marked, along with copper wound stator, blades, capacitor, downrod, split pin, reel

but without regulator complete as required. Similar to Havells- ES 50 or eq. Each 10

22 Supply of 10W Mirror LED Light luminaire. ( similar to BCLSB 10W LED Mirror light or equivalent) Each 10

23 Supplying, installation, testing and commissioning of cubical type out door type feeder pillar made out of 14 SWG sheet steel, totally

enclosed, free standing, floor mounted dust and vermin proof, outdoor type compartmentalized powder coated of approved shade after

anti-rust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips,

control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in

transportable section ,entire panel shall have a common earth bus-bar at rear with 2 nos earth stud cable alleys, cable gland plates in

two half as required as per single line diagram &specification enclosed with the following switch gears including all civil works complete

as required (outdoor lighting panel) (Approved Make: L&T, SIEMENS, SCHNEIDER, ABB, MITSUBISHI, LEGRAND)

INCOMER:-

1 Nos.100 Amps. TP MCCB(25 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)




1 No. KWH Meter (digital type) with CT for metering

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-200 Amp. Ammeter (digital type) with inbuilt ASS, 3 Nos. Class CL 1.0 CTs of suitable rating to match the Ammeter range

BUS BARS:-

200 Amps. TP&N Aluminium bus bars (25 KA)

OUT GOINGS:-

8 Nos. 63 Amps TPN MCCB

8 Nos. 40A TPN, MCB (10KA).

4 Nos. 32A DP, MCB (10KA).

8 Nos. 24 Hr Timer Switch

8 Nos. 63A TP contactor Set 4







as required (Metering panel-1) (Approved Make: L&T, SIEMENS, SCHNEIDER, ABB, MITSUBISHI, LEGRAND)

INCOMER:-

1 Nos. 630 Amps. TP MCCB (25 KA) with electronic releases.





BUS BARS:-


OUT GOINGS:-

3 Nos. 250 Amps TPN MCCB


Space for 55 No. Energy meter

50 No. single phase dual source pre-paid energy meter with communication port. Set 1







as required (Metering panel-2&3)

INCOMER:-

1 Nos. 250 Amps. TP MCCB (25 KA) with electronic releases.





BUS BARS:-


OUT GOINGS:-


Space for 55 No. Energy meter

50 No. single phase dual source pre-paid energy meter with communication port. Set 2




26 Supply, installation, testing and commissioning of Metering software for the above 200 nos energy meters along with control cabling from

the metering panel to the central console, with all monitoring parameters, post paid & pre paid options, printer, computer to load the

software, required UPS complete as required. (Approved Make: Socomec, Siemens, Schneider, L&T)

Set 1

27

Design, Manufacture, Supplying, loading & unloading assembling at site, installation, fixing on the position, testing & commissioning of

the following cubical type, dead front, 2mm thick sheet steel enclosed, free standing indoor (IP:52) / outdoor (IP:65) type extendible Main

L.T. Panel, D.G. Panel, Meter Board Panel (IP:55 if Outdoor) and Feeder Piller (IP:65 if outdoor) For Light & Power Distribution with

vermin proof hinged lockable doors for each compartment provide bus bar interconnections for incoming and outgoing including feeders

Aluminium busbars for earthing complete as per specifications. include one size higher terminal block in cable alley and interconnecting

wires after each Power MCB/MCCB.

Also, refer to General Notes and Specifications for Panels/ Boards.

All Switchgear makes shall be from approved List of makes.

Contractor to submit manufacturer's selection charts for approval.

Only one make of switchgear to be used in a board / Panel.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat

shrinkable sleeves. SMC shrouds busbar supports shall be used. Padlocking facility shall be provided on all MCCB feeders doors and

switch handles shall be locakble in OFF position.

GENERAL NOTES FOR ACB's:

ACB shall comply with standards IS/IEC 60947-1 & 2.

ACB shall have a rated operational voltage of 415V AC, rated insulation voltage of 1000 volts AC, rated impulse voltage of 12kV

Circuit breaker trip unit shall have a display for measurement of current and voltage. It shall be possible to view last 5 trip cause on trip

unit

All trip units provided shall have thermal memory as standard along with enabled ZSI feature

ACB shall be with 4 NO + 4 NC Auxiliary contacts.

Safety Shutter.

Door Sealing Frame.

Inbuilt TRIP LED indication.

Ics = Icu = Icw for 1 sec.for the breakers.

With built in micro-processor based releases:

Adjustable over current with time setting.

Adjustable short circuit with time setting.

Instantaneous short circuit.

Adjustable earth fault with time setting.

Power wiring with one size higher terminals / bus bars for termination of cables as specified.

GENERAL NOTES FOR MCCB's:

MCCbs shall comply with standards IS/IEC 60947-1 & 2.

MCCB shall have a rated operational voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC 50/60 Hz) & impulse voltage (Uimp) of

not less than 8kV.

MCCBs shall be current limiting type having a double break design

MCCB's shall be of 3P with solid neutral link or 4P as called for in the BOQ.

Ics = Icu =100% for the breakers.

MCCB's upto 400A shall be with thermal - magnetic releases and beyond 400A shall be with micro-processor based releases.

MCCB's upto 400A shall have adjustable over current with time setting and fixed short circuit setting .

MCCB's above 400A shall have adjustable over current with time setting and adjustable short circuit with time setting.

MCCB's shall be with extended rotary handle (if not specified in BOQ) and Phase separators both sides

MCCB's shall have auxiliary contacts wherever BMS compatibility is needed.

Incase MCCB is required for 800A, it shall be with Thermal Magnetic release

Earth Fault Protection wherever required in MCCB shall have indication over MCCB/Modules

GENERAL NOTES FOR MCB's:

MCB's shall be of minimum 10kA breaking capacity.

Use 'B' curve MCB's for lighting & small power circuits, 'C' curve for motor duty i.e. for pumps, AC motors, AHU motors, window and split

AC's etc. & 'D' curve for UPS DB's i.e. for computers/ PC's circuit. Main INCOMER & outgoing circuit MCB's shall be selected accordingly

i.e. type B,C & D. as per the nature of the circuit/ load.




Exact MCB rating & category is to be calculated by the electrical contractor based on the final load of the circuit, its nature and fault

current.

GENERAL NOTES FOR TRANSIENT VOLTAGE SURGE SUPPRESSOR (TVSS):

Transient Voltage Surge Suppressors (TVSS) shall be mounted out side the panel / switch board in a sheet steel enclosure.

It shall be suitable for handling required (specified) surge handling capacity, shall be 10 modes protection with noise filters. (EMI & RFI)

and with inbuilt back up fuse protection.

Surge suppressor shall be complete with isolating / protective device in the form of MCB / MCCB of KA rating (breaking capacity) as of

switch board.

27.1 Main LT Panel in Basement

Incoming:

1 No. 400A, 16kA 4P MCCB with suitable links and detachable neutral links.

3 Nos. Phase indication LED lamps with 2Amp back up MCB

Bus Bars

500A TPN aluminium bus bars with heat shrinkable coloured insulated PVC sleeves.

Outgoings

1No.200A, 25kA 4P MCCB



2No.63A, 10kA 4P MCB

9No. 40A, 10kA 4P MCB

3Nos CT Operated MFM meter with RS-485 port for BMS connectivity and following min. inbuilt parameters voltage ,current ,power

factor,KW,KVA,KWH & KVAH .

Necessary Mounting MS stand of 300mm height with 2Nos of coating of anti corrision paint and 1No. Final coating of black paint. The

cost shall include in the cost of SDB.

Main LT Panel as described above. Set 1

27.2 SDB Lift Panel

Incoming:



Bus Bars


Outgoings






SDB LIFT as described above . Sets 1

27.3 SDB Ventilation Panel in Basement

Incoming:



Bus Bars


Outgoings












SDB Ventilation Panel as described above . (Starters not include in Ventilation Panel) Sets 1

28 Supply, laying and testing of under noted sizes of Aluminium conductor XLPE insulated PVC sheathed & sleeved armoured and overall

PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing

trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as

required. (Approved Make: FINOLEX, RPG(ASIAN), RR KABEL, SKYTONE, HAVELLS, POLYCAB)

a) 3.5 x 300 sq.mm Meter 450

b) 3.5 x 120 sq.mm Meter 40

c) 3.5 x 70 sq.mm 80

d) 3.5 x 50 sq.mm Meter 60

e) 4 x 25 sq.mm Meter 300

f) 4 x 16 sq.mm 350

f) 4 x 10 sq.mm Meter 1500

2210

29 Supply of under noted sizes of copper conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV

grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or

on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required. (Approved Make:

FINOLEX, RPG(ASIAN), RR KABEL, SKYTONE, HAVELLS, POLYCAB)

a) 3 x 2.5 sq.mm Meter 10500

b) 3 x 4.0 sq.mm Meter 7500

c) 4 x 10 sq.mm Meter 75

d) 4 x 6 sq.mm Meter 250

30 Supply and making end termination with brass double compression gland including providing and crimping of copper solderless lugs /

ferrules for XLPE armoured power copper conductor cable 1.1 KV grade of following sizes:- ( Approved Make: COMET, PEECO,

GRIPWELL, DOWELLS)

a) 3 x 2.5 sq.mm Set 500

b) 3 x 4.0 sq.mm Set 300

c) 4 x 10 sq.mm Set 4

d) 4 x 6 sq.mm Set 10

Mechanical Parking

31 Design, Manufacture, Supply, Installation, Erection, Testing And Commissioning of Three level Puzzle Parking system as per drawing

with Electro Mechanical technology to accommodate safety safety features as outlined in specifications and as under including cost of

safety features as outlined in specifications and as under including cost of features as outlined in specifications with car Carrying

Capacity of 2500 kg each all Level and Car Dimensions of 5000 mm length x 2100 mm height in all level with average retrieval/parking

time not more than 180 seconds. The Lifting speed should be @3.0 Meter/Minutes & lateral movement speed of 7 M/Min and having

safety features as outlined in specifications and as under including cost of maintenance for one year during the Guarantee period as

mentioned in tender documents inclusive all taxes and levis ( Approved make: Wohr, Klaus, Sotefin)

Nos.

of cars 225

(a) Brakes : DC magnetic

(b) Emergency stop switch

(c) Photo sensors

(d) Final Limit Switch

(e) Pallet Stopper




32 Comprehensive Annual Maintenance of Three Level Pit Puzzle Parking System afte 1st year of guarantee period as per the scope of

the work and specifications given in the tender. The Item includes cost of deployment of required no .given in the tender. The Item

includes cost of deployment of required no.of experienced manpower for maintenance , tools, tackles, parts, spares, equipments,

consumables and all such material required for smooth and uninterrupted working of the complete parking system.

Years 3

CCTV System

33 Supply, installation, Testing & Commissioning of IR Dome camera having 1/2.8" or better Progressive CMOS, Vari-focal Motorized

remote lens of 3 - 9mm Lens, 2048 X 1536 resolution at 60 fps, P-Iris lens, WDR 130db or more, Day-Night with senstivity of 0.05 lux

color & 0 lux B/W with IR , Electronic Shutter Range: 2 ~ 1/20,000 sec , 128GB MicroSD/SDHC card Slot, min. 2 simultaneous streams,

Camera should have dual channel audio by default adjustable resolution & bit rate, H.264, MPEG-4, MJPEG, Time stamp & text caption

overlay, IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP,NTP, DNS,QoS, SNMP and 802.1X, Video

motion detection, manual trigger, digital input. Camera should have inbuilt analytics like Object Counting , Abandoned object , Stopped

Vehicle , Loitering Detection, Intrusion Detection , Wrong Direction , Camera sabotage . The alarm should be raised for above analytics.

The Camera should be ONVIF Profile S and Profile G compliant. The camera shall have following certifications CE - EN 55022 (Class A),

EN 50130-4, EN 60950-1, FCC (Class A) - 47 CFR Part 15 , UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07 and

ICES-003. approved MAke-Pelco-/Bosch/Axis

Nos. 164

34 Supply, installation, Testing & Commissioning of IR Bullet camera having 1/2.8" or better Progressive CMOS, Vari-focal Motorized

remote lens of 9 - 22mm Lens, 2048 X 1536 resolution at 60 fps, P-Iris lens, WDR 130db or more, Day-Night with senstivity of 0.05 lux

color & 0 lux B/W with IR , Electronic Shutter Range: 2 ~ 1/20,000 sec , 128GB MicroSD/SDHC card Slot, min. 2 simultaneous streams,

Camera should have dual channel audio by default adjustable resolution & bit rate, H.264, MPEG-4, MJPEG, Time stamp & text caption

overlay, IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP,NTP, DNS,QoS, SNMP and 802.1X, Video

motion detection, manual trigger, digital input. Camera should have inbuilt analytics like Object Counting , Abandoned object , Stopped

Vehicle , Loitering Detection, Intrusion Detection , Wrong Direction , Camera sabotage . The alarm should be raised for above analytics.

The Camera should be ONVIF Profile S and Profile G compliant. The camera shall have following certifications CE - EN 55022 (Class A),

EN 50130-4, EN 60950-1, FCC (Class A) - 47 CFR Part 15 , UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07 and

ICES-003. Apprved MAke-Pelco/Bosch/Axis

Nos. 4

35 Supply, Installation, Testing & commissioning of Pure IP Outdoor PTZ Camera with IP66 Housing

1/3" or better Progressive CMOS, 4.3~129mm Lens, auto focus, 30x optical zoom, 12x Digital Zoom,1920x1080 resolution @ 60fps,

WDR - 130db, Day-Night, min. illumination 0.08lux (color) & 0.015 lux (b/W), MicroSD/SDHC card Slot, min. 2 simultaneous streams,

Audio, adjustable resolution & bit rate, H.264, MPEG-4, MJPEG, Configurable video Auto tracking on moving object, 360° endless Pan

range, 180° (±90°) Tilt range, 0.1°~450°/sec Pan preset speed, Auto Pan mode, Auto Patrol mode, 256 preset locations, Time stamp &

text caption overlay, IPv4,TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, QoS, SNMP and

802.1X. The Camera shall have Defog Mode Provides Three Levels of Fog Removal Within the Image for Improved Image

QualityCamera should have inbuilt analytics like Object Counting , Abandoned object , Stopped Vehicle , Loitering Detection, Intrusion

Detection , Wrong Direction , Camera sabotage . The alarm should be raised for above analytics.The camera shall work on HPOE and

24VAC/DC. The camera shall be NEMA Type 4X and IP66 rated.The camera shall have following certifications CE (Class A), FCC (Class

A) , UL and cUL Listed , KCC, C-Tick Approved Make-Pelco/Bosch/Axis

Nos. 20

36 Supply Installation testing commissioning of ONVIF Profile S compliant Outdoor Multisensor Panoromic cameras having 4 sensors have

3 megapixel resolution each, total of 12Mpx Day / Night cameras .The camera shall give 180 degree wide view capuring fine details The

cameras shall use the 4 nos 1/3.2 inch format CMOS imager and shall have a 4.8 mm focal length lens on each sensor. The Wide

dynamic range of camera to be 120db or better. The cameras shall have onboard storage to record video in case of network failure. The

Cameras shall be POE ( IEEE 802.3af ) and 24VAC powered.The operating temperature for camera should be -40 deg C to 50 deg C

and operating humidity range should be 15% to 85% or better. The Cameras shall be UL Listed and IP 66 rated. The Camera shall be

Vandalproof with IK10 rating. (Make:- Bosch, Pelco, Axis.)

Nos. 2

Video Management System Server with software




37 Supply installation Testing and Commissioning of Enterprsie grade Video Management Sofware having licenses for 500 cameras and 25

clients. The software should have failover feature.The software should have Map feature. The servers for VMS to be considered for

minimum 500 cameras. It shall have Intel® Xeon® E3-1275 v3 or better with 32 GB DDR3 ECC RAM or better. It should run on

Microsoft® Windows® Server 2012 or latest.It should have SSD storage for operating system. This shall include the required hardware

cost and the software cost for the same as per the system requirement . Shall support Dynamic Host Communication Protocol ( DHCP )

and Network Time Syncronisation Protocol ( NTP ) functionality . Aproved Make-Pelco/Bosch/Axis

Set 1

VMS Recorder Server

38 Supply installation Testing and Commissioning of Network Storage . The storage shall delivers total available throughput of 450 Mbps /

300 Streams for recording of IP video streams as well as playback and export through the client machine .It should have following

hardware fetaure as minimum Processor Intel® Xeon E3-1276 v3 or better, Operating System Microsoft® Windows®Server 2012 . It

should have 200GB SSD storage for Operating system.It should gave Internal Memory 32 GB DDR3 ECC or better with a Storage upto

96 TB or more. It should support RAID 6 feature for HDD redundancy and should be UL listed. It should have Internal, RedundantcPower

Supply. It shall support hot failover.Approved MAke-Pelco/Bosch/Axis

Set 1

39 Supply,installation,testing and commissioning of color high resolution LCD Video wall of comprising of 4 nos. 55 inch display, full HD,

equivalent to SAMSUNG UM55H-E make complete with all accessories. Make: Samsung, LG, Panasonic

Set 1

40 Supply, Installation, Testing & commissioning of Client Workstation PC with dual monitor output provision as per specs. Approved

Make for PC-Dell VOSTRO/HP. Set 1

41 Supply, Installation, Testing & commissioning of joystick for controlling PTZ camera. Approved Makes-Pelco/Bosch/Axis

Set 1

42 SITC of Cat 6, 24 port loaded rack mountable Patch Panel. The panel should be fully unshielded. Nos. 18

43 Supply, installation and testing of layer 2 Networked Switch of capacity of 24 Ports with Managed POE Switch with 2 SFP Module

support. Nos. 18

44Supply, installation, testing and commissioning of Connectors, interfaces, Mounting hardware, tags, identifiers, fixures, clamps, screws,

nut - bolts etc as required for the installation and commissioning of the Systems.LOT 1

45 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding

modular plate etc. as required.

RJ-45 outlet Each 190

46 Supplying and fixing following size/ modules, GI box alongwith modular base & without cover plate for modular switches in recess etc. as

required.

1 or 2 Module (75 mmX75 mm) Each 190

47 Supply and fixing of Modular type PVC Dual Faceplates on existing modular metal boxes complete as required. Nos. 190

48 Supply and fixing of Cat 6 2Meter long Patch cord complete as required. Nos. 380

49 Supply and fixing of Cat 6 1Meter long Patch cord complete as required. Nos. 190

50

Supply, Installation, testing and Commissioning of Digital Addressable Fire Alarm Panel having addressable features (Capable of giving

individual address of each Detector & Devices. The Panel having microprocessor with RS 485 communication, 40 x 2 character

LCD display, field programmable through ATX Keyboard, pulser, timer for dual stage alarm facility complete with indicators, floor/

zone selector switches, stand by SMF lead acid battery (suitable for 96 hours normal operation & after that min. 4 hour for full load

operation), battery charger, battery box, connections to building automation system / Fire fighting pump panel / smoke extraction panel

etc. as required, complete in all respect as per specifications and requirements. The panel shall have built-in Facility of automatic dialling

to 5 telephone numbers in case of alarm. Each zone should have provision of activation of hooter. The Panel should have provision to

expandable features for no. of devices on a zone expanble upto 32 Zones. (The Panel shall be provided with 12 Nos. NO/ NC Potential

free contacts for control modules) complete with all necessary requirement for BMS integrations.

10 Zone (Master Panel) suitable for per zone 40 detector/devices Nos. 1




51

Supply, Installation, testing and Commissioning of Public Address System The PA system controllers shall consist of following capacity

of amplifier for connecting all speaker under scope of this contract. The System shall consist of 1nos of 6 Zone call station, PA Rack with

Cable Manager. The PA System Main controller and its associated router or zone expanders should have NO/ NC contact to take inputs

from Fire Alarm Panel.

240Watts Amplifier dual channel announcement Nos. 1

480Watts Amplifier dual channel announcement Nos. 0

52

Supply, Installation, testing and Commissioning of Resettable type Manual call point with Fire written on the front side capable of

giving individual address.The manual call point should have an indicator, which should "blink" green in case of normal condition and

become steady Red in case of Operation.

Nos. 15

53

Supply, Installation, testing and Commissioning of LMT Hooters cum speaker of min 6watts for PA announcement in Red color

Metal enclosure with Fire written on the front side Suitaible wall / ceiling and surface mounting including making connections with

wires complete in all respects and as per specifications.

Nos. 15

54Supply, Installation, testing and Commissioning of Relay Module with back box with Non Supervised Dual potential free contacts. It

Shall have an LED indication blink in normal conditions & steady Red in case of Fire/ Fault conditions,Nos. 8

55Supply, Installation, testing and Commissioning of Addressable Monitor Module Type B with back box for monitoring the field NO/NC

devices. It Shall have an LED indication blink in normal conditions & steady Red in case of Fire/ Fault conditions,Nos. 6

56Supply, Installation, testing and Commissioning of EN / LPCB approved addressable type Smoke detectors complete i/c accessories, 12

/ 24 volt D.C, with dual LED with 360 degrees view, blink in normal conditions & steady Red in case of Fire/ Fault conditions. Nos. 33

57

Supply, Installation, testing and Commissioning of EN / LPCB approved addressable type Multi sensor detectors complete i/c

accessories, 12 / 24 volt D.C, with dual LED with 360 degrees view, blink in normal conditions & steady Red in case of Fire/ Fault

conditions.

Nos. 315

58

Supply, Installation, testing and Commissioning of Talk back unit with microphone and press to talk botton with indicator mounted in

lockable sheet matel Red color enclosure for Two Way Communiction, written Talk back unit on the front side including making

connections with wires complete in all respect.

Nos. 5

60

Supply, installation, testing and commissioning of 2000VA, 1 Phase, 240V, Pure sine wave Inverter alongwith lead acid batteries

CSB/Exide make giving a back up of min. 2 hrs. at full load as per specification alongwith M.S Poweder coated cabinet with unidirectional

wheels for housing the inverter and batteries, complete as required and as per specifications.

Nos 2

61

Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set of 400 KVA at

0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure, all civil and foundation

works, day tank capacity of 990 liters, foundation works, with AMF Panel, battery, batter charger, return fuel cooler, anti vibration

mounting pads including residential silencer, engine alternator, pcc based auto start, synchronization set, PLC panel for auto DG load

sharing etc, all control wiring safeties with accessories as per specification complete as required. Diesel engine shall conform to

IS:10000 and alternator shall be self excited complete with AVR to IS:4722.

Set 2

62

Supplying, installation, testing and commissioning of 10 Passenger (680 Kg) lifts having contract speed of 1.25 MPS serving different

floors in the lift shaft as per detailed specifications and as under: ( otis, Kone, Johnson, Mitsibishi)

Floor: B+G+3

Travel : 15 Meters (approx.)

Stops and Opening : 5 Stops & 5 Opening

controller: AC Variable voltage and variable frequency

Automatic rescue device complete with dry maintenance free batteries as required

Operation: Microprocessor based single automatic push button / simplex selective collective / duplex selective collective/ with/ without

attendant




power: 415V 3phase 50 HZ, 4-wire system

type of door: a. car: power operated center opening horizontal sliding, stainless steel scratch proof (moon rock finish)

b. landing doors: stainless steel scratch proof (moon rock finish)

A hand rail not less than 600mm long at 900 mm above floor level to be fixed adjacent to control panel in the lift car

The lift panel shall be compatible with the IBMS system for monitoring

Voice announcement system in the car to announce the position of the elevator in the hoist-way as the car passes or stops at a floor

served by the elevator

Lift as per Above description complete as required. Set 2.00

63

Design, Supplying, installation, testing and commissioning of Clock for the clock tower, with GPS controlled, UPS power backup for 48

hours, 4 sided, back lit, timer control for lighting, dia 2400mm, works on single phase 240 volt AC, hourly bell with suitable speakers 200

watt amplifier etc complete as required as per specifications The design of the dial, hands etc shall be as per the approval by the client/

consultants

Clock as per Above description complete as required. Set 1.00

Approved Make: Indian Clock, Ganesh watch co, Anglo swiss

64 NORMAL & SMOKE SPILL AXIAL FANS

Supplying, installing, testing and commissioning of NORMAL & SMOKE SPILL AXIAL FANS as per specifications. Fan shall be direct

driven tube/Vane axial fan AMCA Certified (For Air and Sound Performance). . The fan shall be equipped with mounting bracket & spring

isolators for the installation of the fans. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan shall

be EN 12101-3 Certified & CE/UL/EN Listed for smoke control and exhaust applications as per EN 12101-3 or UL Power ventilator for

smoke control system. Motor make shall be same as mentioned on the fire certificate. Motors shall be suitable for 415+10% volts, 50

cycles, 3 phase AC supply. Fan static pressure shall be as indicated but actual fan static pressure to be checked by vendor. Smoke

Exhaust Fans shall be activated from fire signal from fire alarm system. Fan shall be with fire proof flexible connection at inlet and outlet.

Fan noise level should not be more than 80 dbA @ 3 m distance for normal operation fans when measured in hemisperical reverberant

room conditions.. Sound attenutors of appropriate length as per drawings shall be included in the cost to achieve the desired result.

Required provision for actuation from fire alarm panel shall be provided as required.

Duty : Normal Case & Smoke Case supply & exhaust

Air Quantity : 38,000 CFM

Static Pressure : 30 mm wg

Motor Rating : 11.25 Kw Nos. 4

Note: Maximum allowable velocity for fan shall not exceed 13 m/s

65 Vane/Tube Axial Fan

Supply, Installation, Testing & Commissioning of direct driven VANE / TUBE AXIAL FLOW FAN. Fan shall be AMCA Certified (For Air

and Sound Performance).Fan motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase power supply of class 'F' insulation. The

fan shall be equipped with mounting bracket & spring isolators for the installation of the fans.. Fan shall be with fire proof flexible

connection at inlet and outlet..Emergency Fans shall be activated from fire signal from fire alarm system Fan static pressure shall be as

indicated but actual fan static pressure to be checked by vendor. Fan total efficiency should not be less than 70 %, noise level should not

be more than 80 dbA @ 3 m distance for normal operation fans when measured in hemisperical reverberant room conditions. Sound

attenutors of appropriate length as per drawings shall be included in the cost to achieve the desired result.

a. Duty :Lift lobby

Air Quantity : 10,000 CFM



b. Duty : Liftwell Pressurisation Fans

Air Quantity : 7000 CFM






66 Inline Fan

Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The

casing shall be internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW/SISW with backward / forward

curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 415±10% volt single phase 50 cycles AC

supply. Quoted price shall be inclusive of electronic speed regulator and wiring between fan & speed regulator for single phase fans.

Incase of 3 phase fans quoted price shall be inclusive of DOL starter panel with cabling between starter panel and fan.

The fan shall have low sound level exceeding not more than 45 DBA at three metre distance.

Static Pressure of fan shall be 20 mm of wg.

Fan Selection arrangement shall be as follows:

300 CFM Nos. 5

67 Propeller Fan

Supply installation, testing and commissioning of Propellar Fans, insulation class B, IP class 44, 1500 RPM suitable for

230V±10%, 50 Hz. 1 phase, electric supply complete with cable, required hardware etc. as required.

Electrical Room & Service Room Exhaust Propeller Ventilation fan

Air Qty. = 500 CFM

Fan Type = Propellar Fan

Fan Dia. = 300 mm Nos. 10

68.0 Service Area Exhaust Propeller Ventilation fan

Air Qty. = 3000 CFM

Fan Type = Propellar Fan

Fan Dia. = 450 mm Nos. 2

TOTAL CARRIED TO SUMMARY 'A'

69 AIR DISTRIBUTION

a. SITC flexible connections (Canvas) for ducting connection shall be constructed of fire resistant double resin sleeve as per the

approved shop drawings and specification. Sqm. 175

b. Supply, installation, testing and balancing of Powder coated/Anodised extruded aluminium construction inlet air louvers with bird screen

for fresh air as per specifications and approved shop drawings. Sqm. 20

c. Supply, installation, testing and balancing of Powder coated/ Anodised extruded aluminium construction louvers with bird screen for

exhaust air as per specifications and approved drawings. Sqm. 20

d. Supply, installation, testing and balancing of Powder coated extruded GS construction back draft damper as per specifications and

approved shop drawings. Sqm. 5

70 CONTROL PANELS FOR FANS ( AXIAL FLOW FANS)

Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted

control panels, including anchoring into the wall, wiring terminating into MPCB and copper earthing, in each panel shall be provided by

the electrical contractor.

All wiring and GI earthing of motors from the panel shall be included.

The panel shall include the following components & accessories.

MCB / MCCB with built-in overload relay and single phase preventor ass per the ratings given below, suitable for motor duty and able to

withstand fault level of 20 KA.

Terminal block for power distribution as required.

Contactor, over load relay with built in single phasing protection.

Phase indicating lights and indicating light for `ON’ status.




96 mm x 96 mm voltmeter and ammeter.

Time delay relay for delayed automatic restart of motor (0-180 sec).

Wiring for microswitch for stopping the fan when fire damper closes (in case of Fan only).

For on/off/remote and local operation, 3 pole single throw switch shall be provided in each panel to facilitate override of the automatic

operation.

All Cable trays GI and Conduits shall be MS.

The number of control panels shall be as follows :

a. MPCB with DOL starters suitable for 5 HP motors No. 3

b. MPCB with star delta starters suitable for 15 HP motors No. 4

71

SITC of double walled aluminium rolling shutter with premium puff insulation non- perforated , push pull operation of size 3500x2400 mm

, full powder coated as per approval, with barrel, guide rail, bottom bar, in extruded aluminium casing cover, no gear box with hood cover

as with slat size approx 77mm x 18.5 mm approx,

set 225

72

Providing and fixing modular toilet cubicles of as per manufacturer's standard specifications. All intermediate panels, pilasters, doors

shall be made up of Solid Compact Laminate (Phenolic Core Board) as per IS 2046 based on thermosetting resins, homogeneously

reinforced with cellulose fibers making cubicles impervious to Water, resistant to Fire, etc. Compact laminate should be Greengard and

IGBC certified. Hardware and Fixing.

All accessories shall be of 304 grade including all hardware/fittings. The pilaster are anchored to the flooring using adjustable SS legs.

The SS SQUARE top rail shall be fixed on the top of the pilasters Accessories Std accessories include SS Hinges, SS Door knob, SS

thumb turn indicator, SS coat hook, SS SQUARE top rail and SS channels (All accessories in SS 304 grade) SS legs in SS 316 Grade.

Titan Std Series Cubicles MERINO-BESCO make or equivalent: Std Sizes (W x D x H)- 1000 mm x 1550 mm x 2100 mm, (Height is

including 130 mm gap from bottom) Door Size- 600 mm

Each 24.00

TENSILE STRUCTURE




73

Providing Design & Supplying Architectural Membrane, Assembling, hoisting, erecting and placing in position MS Built-up

section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to Min Grade Yst 210, Tubular Structure:- made from

Steel hollow sections, ISI marked conforming to Min Grade Yst 210) in the profile shape as per drawings with special plate connector,

pinion joints, Plates, hollow sections etc, with cleaning the surface and including Preparation of detailed Architectural Membraneation

and erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and incorporation of Engineer-In-

Charge's comments on same, transportation from Architectural Membraneation yard, cutting , threading, machining, leads and lifts up to

all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Architectural

Membrane shade. Hot finished welded type tubes (Make: - APOLLO/ JINDAL/ BHUSHAN / ISI Mark & Equivalent). Providing and Appling

the complete structure to be Two Coat of Enamel Paint over one coat of Enamel primer in required DFT of (dense film thickness) for each

coat in total DFT of 60 microns. The work is to be executed as per technical specification and direction of Engineer-In-Charge. (Make: -

ASIAN/ MRF/ BERGER/ NEROLAC/ JOTUN & Equivalent). Flexible Composite Cover- Providing, fabricating, assembling and erection of

pre stressed precontraint Flexible composite Cover structure in desired profile as per drawing , with Precontraint ,with weight not less

0.75 kg/sqmtr, with tensile strength of not less than 2800 N/50 mm in Logitudional Direction and 2800 N/50 mm in Transverse Direction,

and similarly tear resistance of not less than 300 N/50 mm in Logitudional Direction and 280 N/50 mm in Transverse Direction, with

thickness of not less than 0.60 mm, and should be coated with Polyvinylidene fluoride (PVDF) on both top and bottom surface, with

minimum 10 years warranty from maufacturer. having Visible light transmission of minimum 6.5% and Sollar Transmittance of not more

than 8.5%,. over steel frames with all fittings and fixtures such as Galvanized MS Flexible Composite Cover /End Plate , EPDM

Ruber,Shackles, Rigging Screws , Turnbuckles, swedge, fork , keder rods & galvanized MS strands /cables.This Should also include

cutting, welding and cables, Plates and necessary hardware for fixing the fabric as approved shape as per drawing, Flexible Composite

Cover shall be cut and manufactured with High frequency PVC Wielding Machine. over steel frames with all fittings and fixtures such as

Swage End, Fork, Flexible Composite Cover Plates GI Flat Bar etc With Necessary Tensioning Material in Complete. Measurement shall

be calculated as plan area and not fabric area. The rate shall include all civil works, foundation, connections etc completely as required. (

Approved Make: Serge Ferrari, Verseidag, Mehgies)

SQ.M. 2,500.00

74








Membrane shade. Hot finished welded type tubes (Make: - APOLLO/ JINDAL/ BHUSHAN / ISI Mark & Equivalent).

Providing and Appling the complete structure to be Two Coat of Enamel Paint over one coat of Enamel primer in required DFT of (dense

film thickness) for each coat in total DFT of 60 microns. The work is to be executed as per technical specification and direction of

Engineer-In-Charge. (Make: - ASIAN/ MRF/ BERGER/ NEROLAC/ JOTUN & Equivalent).

Flexible Composite Cover- Providing, fabricating, assembling and erection of pre stressed precontraint Flexible composite Cover

structure in desired profile as per drawing ,with weight not less 0.95 kg/sqmtr, with tensile strength of not less than 4200 N/50 mm in

Logitudional Direction and 4000 N/50 mm in Transverse Direction, and similarly tear resistance of not less than 550 N/50 mm in

Logitudional Direction and 500 N/50 mm in Transverse Direction, with thickness of not less than 0.72 mm, and should be coated with

Polyvinylidene fluoride (PVDF) on both top and bottom surface, with minimum 15 years warranty from maufacturer. having Visible light

transmission of 5% and Sollar Transmittance of not more than 7%, over steel frames with all fittings and fixtures such as Galvanized MS

Flexible Composite Cover /End Plate , EPDM Ruber,Shackles, Rigging Screws , Turnbuckles, swedge, fork , keder rods & galvanized

MS strands /cables.This Should also include cutting, welding and cables, Plates and necessary hardware for fixing the fabric as

approved shape as per drawing, Flexible Composite Cover shall be cut and manufactured with High frequency PVC Wielding Machine.

over steel frames with all fittings and fixtures such as Swage End, Fork, Flexible Composite Cover Plates GI Flat Bar etc With Necessary

Tensioning Material in Complete. Measurement shall be calculated as plan area and not fabric area. The rate shall include all civil works,

foundation, connections etc completely as required. ( Approved Make: Serge Ferrari, Verseidag, Mehgies)

SQ.M. 4,000.00




75








Membrane shade. Hot finished welded type tubes (Make: - APOLLO/ JINDAL/ BHUSHAN / ISI Mark & Equivalent). Providing and Appling

the complete structure to be Two Coat of Enamel Paint over one coat of Enamel primer in required DFT of (dense film thickness) for each

coat in total DFT of 60 microns. The work is to be executed as per technical specification and direction of Engineer-In-Charge. (Make: -

ASIAN/ MRF/ BERGER/ NEROLAC/ JOTUN & Equivalent). Flexible Composite Cover- Providing, fabricating, assembling and erection of

pre stressed precontraint Flexible composite Mesh Cover structure in desired profile as per drawing , ,with weight not less 0.55 kg/sqmtr,

with tensile strength of not less than 3300 N/50 mm in Logitudional Direction and 3300 N/50 mm in Transverse Direction, and similarly

tear resistance of not less than 650 N/50 mm in Logitudional Direction and 650 N/50 mm in Transverse Direction, with thickness of not

less than 0.95 mm, and should be with minimum 10 years warranty from maufacturer. having Porosity of 28% with, Front Face Metallic or

Pearl Finish & Back Face Matt, as per particular specification with a 10 years conditional contractual warranty etc. over steel frames with

all fittings and fixtures such as Galvanized MS Flexible Composite Cover /End Plate , EPDM Ruber,Shackles, Rigging Screws ,

Turnbuckles, swedge, fork , keder rods & galvanized MS strands /cables.This Should also include cutting, welding and cables, Plates

and necessary hardware for fixing the fabric as approved shape as per drawing, Flexible Composite Cover shall be cut and manufactured

with High frequency PVC Wielding Machine. over steel frames with all fittings and fixtures such as Swage End, Fork, Flexible Composite

Cover Plates GI Flat Bar etc With Necessary Tensioning Material in Complete. Measurement shall be calculated as plan area and not

fabric area. The rate shall include all civil works, foundation, connections etc completely as required. ( Approved Make: Serge Ferrari,

Verseidag, Mehgies)

SQ.M. 2,400.00

76

Supply installation and commissioning of roof tiles including all components like, ridge tree, ridge clips, tie clips, valley sheet, base

material underlays radiant barrier, water proofing, non-mettalic rain water gutter system and all its components similar to Luxron, color as

per architects choice, complete as required similar to Monier Elabana of dimension 420mm x 330mm by weight 4.2kg /tile consisting of

other components like ridges, barge tiles complete in all respect compliance to BS EN 490 : 2004, fixed with cement batons please note

that installation shall be done only by the authorised company representative. Rates quoted shall be inclusive of making cement batton

on top of sloping RCC roof, fixing the tiles as per manufacturers specifications. ( Approved Make: Monier, wienerberger, LaFarge)

Sq.m. 2,073.40

77 Providing and laying Vitrified tiles in 600X1200 mm size (thickness to be specified by manufacturer), with water absorption less than 0.08

% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement &

matching pigments etc. complete.

Sqm 542.52

PHE WORKS

78

Providing and fixing commercial prefabricated HDPE underground oil and grease seperator of suitable capacity (app. For 50 Nos of Wet

Kiosks) based on actual cooking/usage operations as per manufacturers specifications, complete in all respects to utmost satisfaction of

engineer in charge. This includes complete underground installation with necessary earthworks and foundations) Approved make:

Supreme, Ashrivad

Each 3.00

79

Supply of all labour, materials, tools and appliances for the construction of Desilting tank of 2000x1000x1000mm depth (eff) including all

civil works ie PCC bedding, base slab,brickwalls, baffle walls, suitable gratings, RCC top slab with 2 Nos. of 560mm dia CI/SRRC

manhole, vent pipes, plaster, foot rest including including necessary excavation, backfilling and disposal of surplus soil, complete as per

approved shop drawing (detailed shop drawing to be submitted by the contractor duly approved from authority and structural engineer).Each 3.00




80

Supply and construction of Rain water Harvesting tank of 3.5m diameter, 3.5m depth (effective depth from IL of incoming pipe) including

all civil works i.e. PCC bedding under the walls, brick/RCC wall (as per structural requirements), sand / gravel / boulder filter beds/ layer

of 300mm thickness each, RCC top slab cover with 2 nos of 560mm dia (heavy duty) CI/ SFRC manhole cover, vent pipes, plaster, foot

rests including 300mm dia boring and fixing of 160mm dia uPVC perforated pipes (to be taken 2m above the water level) and filling with

rounded washed pea gravels all around the perforated pipes in the bore hole including necessary excavation, backfilling and disposal of

surplus soil, complete as per approved shop drawing (detailed shop drawing to be submitted by the contractor duly approved from

authority and structural engineer).

Each 3.00

81

Providing and fixing underground perforated (half on top) UPVC agricultural pipes as per I.S:4985, Class-III, 6 kg/cm2; wrapped with Geo

Filter membrane all round including gravel and pebble filtering layers allround the pipe for subsoil drainage including all fittings and

jointing with cement solvent complete as per manufacturer's specifications including excavation, refilling and disposal of surplus earth,

wherever required and making good the same, complete as directed by the Engineer-in-Charge. (for sub soil drainage of ground)

110 mm O.D. Meter 1100

82

Providing and fixing UV resistant UPVC agricultural pipes as per I.S:4985, Class-III, 6 kg/cm2 for horticulture including all fittings with or

without access i.e bends, junctions, cowls, offsets, metal pipe clips/holders etc. and jointing with cement solvent complete as per

manufacturer's specifications with excavation, refilling and disposal of surplus earth, including cutting holes in walls and floors,

wherever required and making good the same, complete as directed by the Engineer-in-Charge. (for garden hydrant) (Approved make:

Apollo, Supreme, Finolex)

A. 25 mm O.D. Meter 750.00

B. 90 mm O.D. Meter 975.00

83

Supply, installation, testing and commissioning of horizontal centrifugal pump set with C.I casing, bronze impeller, stainless steel shaft

directly coupled to motor suitable for operation on 415 ± 10% volts, 3 phase, 2900 RPM, TEFC electric motor with coupling guard

mounted on a common channel base plate. (Cost to include gun metal isolation valve on its suction line and pressure gauge, non return

valve and gunmetal isolation valve on its delivery line as per manufacturer specifications)

Filter feed Pump ( 1 set = 1 working +1 standby) Set 1

Capacity : 170 LPM

Head : 30 Mtrs

84

Supplying, installing, testing and commissioning of Pressure sand Filter consisting of gravel, pebbles, sand grading filtration layers with

inlet, outlet, drain, overflow, back wash flanges, manhole, safety and pressure relief valves, gauges, comprising of all Frontal piping,

valves and necessary accessories suitable for a flowrate of 10000 lph at 4 Kg/Sq cm pressure. The material of construction shall be

composite FRP of approved make and design. (Maximum velocity not to exceed 1.5m/sec in the filtration system)

Set 1

85

Supplying, installing, testing and commissioning of Activated Carbon Filter consisting of suitable activated carbon granules with inlet,

outlet, drain, overflow, back wash flanges, manhole, safety and pressure relief valves, gauges, comprising of all Frontal piping, valves

and necessary accessories suitable for a flowrate of 10000 lph at 4 Kg/Sq cm pressure. The material of construction shall be composite

FRP of approved make and design. (Maximum velocity not to exceed 1.5m/sec in the system) Set 1

86

Supplying, installing, testing and commissioning of Softener consisting of approved resin with inlet, outlet, drain, overflow, back wash

flanges and multiport valves, manhole, safety and pressure relief valves, gauges, comprising of all Frontal piping, valves and necessary

accessories suitable for a flowrate of 10000 lph at 4 Kg/Sq cm pressure. The material of construction shall be composite FRP of

approved make and design with necessary brine regeneration system. (Maximum velocity not to exceed 1.5m/sec in the softeneing

system) Set 1

Inlet Water Hardness : As per water quality report

Outlet Water Hardness : 0 PPM (Commercial zero)




87

Supplying, installing, testing and commissioning of chlorine dosing system consisting of one HDPE tank of 200 litres capacity with a

positive displacement diphragm solenoid dosing pumps (2 Nos.) having variable flowrate of 0-6 lph, flow sensors, reactor (with reactor

housing), safety vessel, chlorine dioxide meter, probes, rising connector, holding tanks with Dulco meter chlorine analyser and

controller.The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection

fittings. The pump shall be speed & stroke control Asia LMI / equivalent make.

Set 1

88





Relift Pump ( 1 set = 1 working +1 standby) Set 1

Capacity : 170 LPM

Head : 25 Mtrs

89

Supply, installation, testing and commissioning of horizontal/vertical centrifugal terrace booster auto pump set with S.S casing, SS

impeller, SS shaft directly coupled to motor suitable for operation on 415 ± 10% volts, 3 phase, 2900 RPM, TEFC electric motor with

coupling guard mounted on a common channel base plate and suitable FRP vessel as per manufacturers specifications. (Cost to include

suitable gun metal isolation valve on its suction line and pressure gauge, non return valve and gunmetal isolation valve on its delivery

line as per manufacturer specification )

Terrace Booster Pump ( 1 set = 1 working +1 standby) Set 3

Capacity : 90 LPM

Head : 18 Mtrs

90





Gardening Pump ( 1 set = 1 working +1 standby) Set 1

Capacity : 150 LPM

Head : 35 Mtrs

91

Providing and fixing gunmetal lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting

and gland of superior quality having minimum working pressure of 10 kg/cm2 including necessary flanges as required, complete in all

respects.

15 mm nominal bore Each 1








92

Supplly, installation and commisioning of Solar Hot water system (MNRE approved system) of 150-200 lpd output hot water, comprising

of MNRE approved solar glass panel, stainless steel insulated Hot water tank (100 litres), interconnecting copper tubes and pipeline

including complete MS supporting frame and required RCC supports, complete in all respects. (system to be installed over the top of

each Wet Kiosks - Detailed proposal/line diagram, optimum system configuration, detailed shop drawings to be proposed and approved

from consultant/engineer in charge before procurement)

Set 150.00

93

Providing and fixing gunmetal lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting

and gland of superior quality having minimum working pressure of 10 kg/cm2 including necessary flanges as required, complete in all

respects. ( approved Make: Zoloto, CIM)

A. 15 mm nominal bore Each 12.00

B. 20 mm nominal bore Each 166.00

C. 25 mm nominal bore Each 6.00

D. 32 mm nominal bore Each 2.00




E. 40 mm nominal bore Each 4.00

F. 50 mm nominal bore Each 2.00

G. 65 mm nominal bore Each R.O

H. 80 mm nominal bore Each 4.00

94

Providing and fixing thermal insulation over hot water pipes in exposed/chase (internal) with 6/9mm thick approved equivalent thermal

insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density

of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacturer's specifications and

finishing it with 6mm thick rough plaster of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) ( Approved Make: Kidflex,

Vedoflex)

A. 15 mm nominal bore Each 350.00

B. 20 mm nominal bore Each 150.00

95

Supply, installation, testing and commissioning of underground FRP Tank, FDA approved, rust proof, leak proof, of the following

capacities including all civil, structural , foundation works and plumbing works complete as required as per the Engineer in charge,

consultant complete as required similar to sintex CWUG 5000-02 (Approved Make: Sintex, Kain, Ventura, BSF)

A. 50,000 litres Each 1.00

96

Supply of all labour, materials, tools and appliances for developing tubewell including all associated civil and electo-mechanical works

comprising of required boring, assembling, lowering and fixing in vertical position unplasticised PVC medium well casing pipe and screen

pipe, strainer pipe as per methods prescribed in IS:2800 (part 1), packing of pea gravel fine/medium/coarse in required grades and

sizes, Mild steel cap, MS clamp , Bail plug / bottom plug including development of tubewell in accordance with IS 2800 and IS 11189, to

establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity of air compressor,

running the compressor for required time till well is fully developed, measuring yield, desinfection of tubewell, preparing detailed static

level, draw down, collecting water sample from different soil strata, complete in all respects including necessary disposal of surplus soil,

complete as per requirement, detailed drawing to be submitted by the contractor duly approved and work to be carried to the utmost

satisfactuion of the engineer in charge).(Water table of site to be ascertained in the site vicinity and yield expected shall be

approx.12500lit/hr; necessary approvals to be taken from authority and engineer in charge before starting the work)

Set 3.00

97 Providing and fixing domestic water meter as per IS 771 of superior and approved quality having minimum working pressure of 10 kg/cm2

including necessary flanges as required, complete in all respects.Each 150.00

98 Providing and fixing G.I. inlet fitting with 1 or 2 inlets fabricated from 100 mm dia G.I. pipes and welded G.I. sockets fixed to C.I. trap

with lead caulked joint and set in cement concrete as per drawing complete as per direction of Engineer-Incharge. Each 188.00

99 Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement

motor to match with floor finish as per direction of Engineer-Incharge.

a. Size 100 mm x 100 mm Each 26.00

b. Size 127mm diameter Each 220.00

100 Providing and fixing GI floor drain of 100 x 50mm, complete as per instructions of the Engineer in charge. Each 30.00

101 Providing and fixing CI Floor Clean Out plug with suitable insert keys (for opening) as per approved sample, properly jointed to soil and

waste pipe as per requirement, complete as per instructions of the Engineer in charge. Each 16.00

102

Providing and fixing white vitreous china flat back large urinal (semistall) of 590x375x390mm app. size with C.I. hangers, 15mm dia

spreaders, 32mm dia C.P. brass domical waste, 32mm dia C.P. bottle trap, and C.P. connection pipe upto wall with wall flange, complete

including cutting and making good the walls and floors wherever required. Each 34.00

103

Providing and fixing battery operated sensor based automatic flushing system for urinals, including sensor and required electrical and

water connections etc, complete in all respect to make it fully functional including cutting and making good the walls etc. wherever

required as directed by the Engineer-in-charge.

Each 34.00

104Providing and fixing Handshower (Health faucet) with PVC Flexible Tube with wall hook etc complete in all respect.

Each 34.00

105Providing & Fixing 300mm long SS grab bars fixed to wall with rawl plugs and CP brass screws complete. Approved Make: Kohler, Toto,

DuravitEach 4.00




106Providing and fixing single lever C.P. brass single hole sink mixer with swinging casted spout and 18" long C.P connection with brass

bush complete including cutting and making good the walls wherever required. Each 150.00

107

Providing and fixing G.I. inlet fitting with 1 or 2 inlets fabricated from 100 mm dia G.I. pipes and welded G.I. sockets fixed to C.I. trap

with lead caulked joint and set in cement concrete as per drawing complete as per direction of Engineer-Incharge. Approved Make:

Kohler, Toto, Duravit

Each 26.00

108

Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement

motor to match with floor finish as per direction of Engineer-Incharge. Approved Make: Chilly, Blucher, Aco, Kessel

A. Size 100 mm x 100 mm Each 16.00

B. Size 127mm diameter Each 190.00

109 Providing and fixing GI floor drain of 100 x 50mm, complete as per instructions of the Engineer in charge. Each 16.00

110

Providing and fixing CI Floor Clean Out plug with suitable insert keys (for opening) as per approved sample, properly jointed to soil and

waste pipe as per requirement, complete as per instructions of the Engineer in charge. Approved Make: Finolex, Supreme, Ajay Each 8.00

FIRE FIGHTING

111 Supply, Installation , Testing & Commissioning of Mild steel black pipe (IS:1239 Part -I and IS:3589) heavy class including cutting,

threading, welding, jointing with all fitting i.e tees elbow, bends , flanges , reducers etc including excavation (up to 1.5 M deep) back

filling with excavated earth, removal of surplus soil and providing anti corrosive treatment by coating and wrapping the burried pipes with

4 mm thick,100mm wide anti corrosive tapes of approved makes as per IS :10221 complete as required. (for external underground pipes

burried in the trenches)

a) 150 mm dia RM 1350

b) 80 mm dia RM 15

112 Supply, Installation , Testing & Commissioning of Mild Steel pipe (IS:1239 Part -I ) heavy class including cutting, threading, welding,

jointing with all fittings i.e tees, bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls / slabs and

making good the same complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved

make and shade including all MS structural steel work for supporting and hanging the pipes. (for exposed pipes in shafts , ceiling and

terrace)

a) 150 mm dia RM 305

b) 100 mm dia RM 735

c) 80 mm dia RM 230

d) 65 mm dia RM 195

e) 50 mm dia RM 70

f) 40 mm dia RM 50

g) 32 mm dia RM 260

h) 25 mm dia RM 2100

1113 Providing & fixing Gun-metal Fire Brigade inlet connection (collecting head) consisting of 63 mm dia instantaneous type inlet with built-in

check valve and 150 mm dia. flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 with 150mm dia butterfly

valve and 150mm dia Non Return valve with suitable accessories.

a) Four Way (to be connected to the external fire hydrant and sprinkler main) Each 1

b) Four Way (to be connected to the underground fire tank) Each 1

114 Providing & fixing Gunmetal fire Brigade Suction hose coupling (Draw out Connection) with nut for female coupling as per IS:902-1974

complete with 150mm dia. 1 No C.I Foot valve flanged (to be connected to static water tank).

Each 1

115 Providing & fixing M.S cabinet (for Draw out/ Fire brigade inlet connections ) fabricated from 16 gauge sheet with full front glass door and

locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make suitable

mounted on a raised masonry platform as required (Approx. 0.6m x 0.45. m)

Each 3




116 Supply, Installation, Testing & Commissioning of single headed, Gunmetal ISI marked oblique pattern hydrant landing valve with 80 mm

dia flanged inlet and 63 mm dia gunmetal instantaneous pattern spring lock type female coupling for connecting to hose pipe complete

with gunmetal cap and G.I chain twist release type, plug and all accessories as per IS:5290-1983 (Type A)

Each 35

117 Providing & fixing nonpercolating flexible hose pipe (RRL type – A) ISI marked (IS:636 Type A) 63 mm dia. , 15 mtr long ISI marked with

gunmetal male and female instantaneous type coupling (IS:903) machine wound and riveted to hose pipe with copper rivets and 1.5

Sq.mm.copper wire.

Each 70

118 Providing & fixing First-Aid Fire Hose Reel wall mounting swinging type fixing bracket complete with drum , bracket and 20 mm dia x 36

m length high pressure Hose Reel tubing as per IS:884 with 5 mm dia orifice gunmetal shut off nozzle . The Hose Reel shall strictly

confirm to IS 884-1985

Each 20

119 Providing & Fixing standard gun-metal short size branch pipe 63 mm dia with 20 mm dia nozzle with standard 63 mm instantaneous type

coupling ISI marked (IS:903).

Each 35

120 Providing & fixing M.S. fire hose door fabricated from 16 gauge M.S. sheet with full glass front door and locking arrangement, suitable to

accommodate 1Hydrant landing valve, 1 fire hose reel, 2 nos. 15 m long 63 mm dia hose, 1-branch pipe, The doors shall be painted with

one coat of primer and finished stove enameled finished in Fire Red and “Fire Hose” written on front including suitably mounted on a

raised masonry platform as required. (Approx. size 1.2x 0.75 m x 2.1 m )

Each 20

121 Providing & fixing weather proof external fire hose cabinet fabricated from 16 gauge M.S. Sheet with full glass door and locking

arrangement, suitable to accommodate 2 nos. 15 M long hose pipe and 1 No branch pipe. The cabinet shall be painted with one coat of

primer and finished stove enameled finished in Fire Red colour and "Fire Hose” written on front including suitably mounting on the raised

platform, complete as required. (Approx size 0.75 m x 0.6 m x 0.25 m)

Each 15

122 Providing and fixing gun metal gate valve with unions and necessary flanges of following dia:

a) 25mm dia. Each 20

123 Providing and fixing standard fireman's axe with heavy insulated rubber handle tested for 20 Kilowatts. Each 35

124 Providing and fixing of C.I. Double flanged butterfly valves complete with bolts, nuts, rubber insertions etc.as per I.S:13095 class PN 1.6

and tested to pressure of 20 kg/cm2 including necessary flanges as required, complete in all respects.

a) 150 mm dia Each 9

b) 100 mm dia Each 14

c) 80 mm dia Each 15

125 Constructing masonry Chamber 90x90x100cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand)

for sluice/butterfly valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid

and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.

Each 6

126 Providing & fixing 25 mm dia brass air release valve including brass stop cock, nipple etc with all accessories as required.( to be

installed on the top of the fire risers)

Each 7

127 Providing & fixing dial type pressure gauge with isolation cock and chrome plated copper pipe at hydrant station.

a) Dial diameter 100 mm calibration 0-15 kg/ sq.cm. Each 7

128 Providing, fixing and testing of 15mm dia. Chrome finished sprinkler head with quartz bulb, set to operate at 68oC, complete as per given

specifications (UL/FM Approved).

a) Pendant Sprinklers Each R.O

b) Upright Sprinklers Each 1095

c) Side wall sprinklers Each 60

d) Water curtain Sprinkler/Nozzles (K-23) Each 215




129 Providing and fixing 25mm dia inspecting & testing assembly with gunmetal isolation valve, gunmetal sight glass, byepass valve &

connected to drain line complete in all respect as per standard practice of code including pressure gauges of approved make.

Each 9

130 Providing and fixing electrically operated flow indicating switches with threaded connection for indicating water flow in sprinkler branch

line with necessary junction box installed in accessible place, including cost of wiring, cable etc. complete upto the anunciation /alarm

panel.

Each 9

131 Providing, fixing and testing of 150m dia alarm check valve set to water motor alarm/gong, retard chamber, UL Listed/FM approved,

complete with drain cock arrangement and with all accessories, welded or screwed as required including cutting holes and chased in

brick or RCC walls and making good complete.

Each 1

132 Providing and fixing modular construction electronic annunciation panel suitable of detecting any water flow in the sprinkler line through

flow switch having app. 12 zones (9 working & 3 spare for future) complete in all respect and consisting of all buzzing, flashing audio and

visual alarm in case of fault, fire etc.The panel should have interface for connection to main fire panel and as well as to complete

controlled building management system as per requirement and instructions of the Engineer-in-Charge.

Set 1

133 Supply and fixing of ISI marked (IS:15683) Portable fire extinguisher, water expelling WCO2 type (gas pressure) type 9 litres with

gunmetal cap. and nozzle and complete in all respects including initial fill and wall suspension bracket.

Each 20

134 Supply and fixing of ISI marked (IS:15683) Portable Fire Extinguisher, Carbon dioxide type of 4.5Kg capacity flat base including valve,

discharge hose of not less than 10mm dia. 1m long and complete in all respect including initial fill with CO2 gas conforming to IS: 307-

1966 filled to a filling ratio of not more than 0.667 and wall suspension bracket.

Each 20

135 Supply and fixing of 6 Kg capacity ABC Type, Portable Fire Extinguisher, dry powder type (Gas Cartridge) with cylinder initially fully

charged with dry powder, ISI marked confirming to IS: 15683 complete with standard discharge valve with tube, CI bracket for wall

mounting

Each 20

136 Supply and fixing of 6 litres Kitchen Wet Chemical fire extinguisher (Class K, A, F rated for food stalls, cooking and catering areas to

extinguish oil, grease and fat fire) with cylinder fully charged with wet chemical confirming to IS: 15683:2006 complete with standard

discharge valve with tube, CI bracket for wall mounting.

Each 8

137 Supply and fixing of ISI marked (IS: 10204) portable fire extinguisher Mech. Foam type capacity 9 litres with gunmetal cap and nozzle

and complete in all respects including initial fill and wall suspension.

Each 9

138 Supply and fixing of ISI marked (IS:2878) Fire and wall suspension bracket, Extinguisher, Trolley mounted carbon-dioxide type capacity

22.5 Kg. Flat base including valve, discharge hose of not less than 10mm dia 1m long complete in all respects including wheeled trolley,

carrying handle and initial fill with CO2 gas as per IS: 307-1996 filled to a filling ratio of not more than 0.667.

Each 2

139 Supply and fixing of ISI marked fire extinguisher Mechanical Foam type capacity 50 litres with gunmetal cap and nozzle, trolley mounted

and complete in all respects including initial fill.

Each 2

140 Supply and fixing of ISI marked fire buckets with stands and complete in all respects including sand filling. Each 10

Electrical operated Main Fire Pump

141 Supply, Installation, testing and commissioning of Electrical motor Driven Main Fire Pump for Hydrant system suitable for automatic /

manual operation consisting of the following as per specifications.

a) Horizontally mounted, centrifugal split type single stage fire pump having cast iron body, bronze impeller, stainless shaft & capable of

delivering 2280LPM against a total head of 60M while running at 2900 rpm complete including bypass arrangement for periodical

testing of the working of the pumping set as per requirements.

b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts ± 15%, 3 phase , 50HZ, A.C. supply of suitable

capacity for the above pump running at 1450 rpm coupled with flexible coupling including earthing as per relevant Indian Standard &

specifications.

c) Common base frame/bed plate for mounting Pump and Motor fabricated of suitable MS channel as per manufactures

recommendations.




d) Suitable RCC (1:2:4) Pump Foundations as per manufacturers design and 4 nos . Dunlop (cushy foot) heavy duty Anti vibration

mounting pads.

e) 1 No. pressure gauge in the dilevery line with gunmetal isolation cock and 1 No. of Pressure Switch

f) Suitable mechanical seal with mounting arrangement. Coupling and coupling guard for direct coupling of pump and mortor.

g) Drain pipe with valve Set 1

142 Electrical operated Sprinkler Pump

Supply, Installation, testing and commissioning of Electrical motor Driven Main Fire Pump for Sprinkler system suitable for automatic /

manual operation consisting of the following as per specifications.






specifications.


recommendations.


mounting pads.




143 Diesel operated satandby Fire Pump.

Supply, Installation, testing and commissioning of Diesel Engine Driven Fire Pumping set suitable for automatic/manual operation

consisting of following as per specifications.

a) Horizontally mounted centrifugal type single stage fire pump having cast iron body, bronze impeller , stainless steel shaft & capable of

delivering 2280 lpm against a total head of 60 m complete with bypass arrangement for periodical testing of the working of the pumping

set as per requirements

b) Water cooled approved Diesel Engine suitable for developing suitable power at 1800 RPM above pump complete with automatic

starting mechanism , batteries , charge unit., flexible coupling with the pump, fuel tank silencer , exhaust pipe and all standard

accessories as required as per required rules including earthing, mandatory spares and tool kit.

c) Common base frame/bed plate for mounting pump and Engine fabricated of suitable M.S Channel as per manufactures

recommendations.

d) Suitable RCC pump foundations as per manufactures design with Anti vibration spring isolators of suitable size.

e) 1 No. pressure gauge in the delivery line with isolation cock and 1 No. of presssure switch


g) Drain pipe with valve

h) 1 No. 200 Lits capacity day oil storage tank fabricated from 4 mm thick M.S. sheet. Tank shall be provided with inlet, outlet,

overflow, vent drain connections, manhole cover (300 mm I.D.) & level indicators. Tank shall be mounted on 2 m high steel

structural supports with access ladder (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside

and one coat of red oxide & two or more coats of synthetic enamel paint of approved colour on out side.

I) 24 volts 180 AH lead acid battery (12 volts - 2 Nos) with boost/Trickle battery charger for starting the engine automatically complete as

required.

Set 1

144 Jockey pump

Supply, Installation, testing and commissioning of Electrical Motor Driven Automatic pressurization (Jockey) pumping set consisting of the

following as per specifications.

a) Vertical mounted centrifugal end suction type single stage fire jockey pump for building pressure loss due to any leakage in the

system and capable to deliver approx. 180 LPM against a total head of 60 M having cast iron body, bronze impeller, stainless steel shaft

and complete with bypass arrangement for periodical testing of the working of the pumping set.




b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts + 15% 3 phase 50 HZ A.C supply of suitable

capacity for the above pump with synchronous speed of 2900 RPM conforming to IS: 325 and duty coupled with above pump coupled

with flexible coupling including earthing as per relevant Indian Standard and specifications.

c) Common base frame/bed plate for mounting Pump and Motor fabricated of suitable M.S Channel as per manufacture’s

recommendations.

d) Suitable RCC pump foundations as per manufactures design and 4 Nos. Dunlop Anti vibration (cushy foot) heavy duty mounting pads.

e) Suitable mechanical seal & 1 No. pressure gauge and pressuer switch on the pump delivery line with gunmetal isolation cock

f) Coupling and coupling guard for direct coupling of motor and pump.


145 Electrical operated Water Curtain Pump

Supply, Installation, testing and commissioning of Electrical motor Driven Water curtain Pump suitable for automatic / manual operation

consisting of the following as per specifications.






specifications.


recommendations.


mounting pads.




146 Terrace Fire Pump

Supply, Installation, Testing and Commissioning of Electrical Motor Driven terrace fire pumping set consisting of the following as per

specifications.

a)Horizontally mounted centrifugal monoblock single stage fire pump for building pressure loss due to any leakage in the system and

capable to deliver approx. 900 LPM against a total head of 40M having cast iron body, bronze impeller, stainless steel shaft and

complete .

b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts + 15% 3 phase 50 HZ A.C supply of suitable

capacity for the above pump with synchronous speed of 2900 RPM conforming to IS: 325 and duty coupled with above pump coupled

with flexible coupling including earthing as per relevant Indian Standard and specifications.

c) Common base frame/bed plate for mounting Pump and Motor fabricated of suitable M.S Channel as per manufacture’s

recommendations.

d) Suitable RCC pump foundations as per manufactures design and 4 Nos. Dunlop Anti vibration (cushy foot) heavy duty mounting pads.

e) Suitable mechanical seal & 1 No. pressure gauge and pressure switch on the pump delivery line with gunmetal isolation cock

f) Coupling and coupling guard for direct coupling of motor and pump. Set 1

147 Air Vessel for Fire Pumps

Providing and fixing double flanged vertical air vessel fabricated from 10mm M.S. plate with dished ends from 10mm M.S. plate, one

standard pressure tight manhole, painted inside with bitumasitc or anit-corrosive paint and outside with one coat of primer and two coats

of syntheitc enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required

accessories to operate commonly main fire pumps (3 No)& Jockey pumps(2 No) at drop of pressure, automatically at required pressure

setting. (To be placed in the plant room)

Recommended dia : 450mm

Height of shell : 2000mm

Working pressure : 6.0 Kg/sq.cm

Test pressure : 20 Kg/sq.cm Each 1




148 Supply, Installation , Testing & Commissioning of heavy class Mild Steel pipe ( confirming to IS:1239 Part -I upto 150mm dia and IS 3589

above 150mm dia of 6.35mm thickness) including cutting, threading, welding, jointing including all fittings i.e tees, bends, elbows

reducers, clamps, hangers etc. including cutting holes in brick or RCC walls / slabs and making good the same complete including

painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all MS

structural steel work for supporting and hanging the pipes. (for all suction and delivery header pipes and exposed pipes in the plant

room)

i) 200 dia Meter 20

ii) 150 dia Meter 60

iii) 80 dia Meter 4

iv) 65 dia Meter 4

v) 50 dia Meter 4

vi) 25 dia Meter 10

149 Providing and fixing cast iron double flanged Y strainer fabricated with brass perforated sheet basket tested at 16Kg/cm2 including nuts,

bolts, gaskets etc complete.

(a) 200mm dia Each 2

150 Providing and fixing cast iron flanged butterfly valve, wafer type, class PN 16 as per IS: 13095 including nuts, bolts, gaskets etc ,

complete.

(a) 200mm dia (gear operated) Each 4

(b) 150mm dia Each 12

(c) 100mm dia Each 0

(d) 80mm dia Each 2

(e) 65mm dia Each 2

151 Providing & fixing horizontal cast iron flanged non-return valve as per IS 5312 , PN 16 including nuts, bolts, gaskets etc complete.


(b) 65mm dia Each 2

152 Providing and fixing of suitable flexible neoprene rubber expansion joint, single arch with integral rubber flanges tested at 16Kg/cm2 with

SRR drilled as per BS-10, Table-D, complete of following size:


(b) 80mm dia Each 2

(c) 65mm dia Each 2

153 MOTOR CONTROL CENTRE (MCC)

Supply, storing, erection, testing and commissioning of automatic motor control panel comprising generally of the following and fabricated

as per specification (Detailed electrical line diagram and shop drawings to be approved by consultant/engineer in charge before

procurement).

set 1

a. 400 Amps incoming TPN SFU with fuses

b. 400 Amps aluminum bus bar as per specification

c. 100 amps TPN MCCB outgoing leader with fuses for jockey pumps

d. 250 Amps, TPN MCCB outgoing feeder for main electric pump

e. Voltmeter 96mm (0-500 V ) with selector switch and protection fuses for incomer

f. DOL starter for jockey pump (2 Nos.) with single phase preventor, automatic pressure switch starting arrangement indicating lamps,

fuses and resistors

g. DOL starter for main electric hydrant pump with motor protection relay selector switches, ammeters, CTS, Jockey pump and automatic

pressure switch starting arrangement , MCBs for contro cirucuits

h. DOL starter for main electric sprinkler pump with motor protection relay selector switches, ammeters, CTS, Jockey pump and

automatic pressure switch starting arrangement , MCBs for contro cirucuits

1. DOL starter for electric water curtain pump with motor protection relay selector switches, ammeters, CTS, Jockey pump and

automatic pressure switch starting arrangement , MCBs for contro cirucuits

j. Audio visual alarm system and necessary indicating lamps

k. Minimum length of 500mm required for cable termination




LANDSCAPING WORKS

154 FINISH-Rubberized EPDM

Providing and laying 15mm thick EPDM (resilient rubberized) paving (of approved color) over 30mm scrap rubber as/manufacturer,

as/spec with direction as per engineer in charge, of ecoflex or equivalent make. (Basic rate of EPDM id Rs-317 per sqft.). sq.m 3,500.00

Approved make: Play safe by Ecoflex, floor craft by bioflex, Arisafe by Arihant

155 FINISH- Stamp Concrete

Providing, Applying and finishing the top surface of concrete in approved finish and shade,in accordance with sprinkling of Exterior grade

UV resistant UniStone colour hardener at the rate of 0.410 kg./sq. ft., floating the surface with different types of floaters. Chemical

treatment with cyclone machine to bring up sand stone finish. Cleaning the surface with water and application of acrylic based sealer in

matt finish as approved for finishing. Complete for External roads. (Colour as/ approved sample) Make-UNISTONE or equivalent. (Basic

rate of stamp concrete finish is Rs-90/sqft). Approved Make: Unistone, Lafarge, RMC Readymix

sq.m 5,400.00

156 Fountain works

a Sound system

Supplying & Installation of an approved Sound system with frequency waterproof speaker, Amplifier of suitable size, Control cabinet,

Speaker cable, Accessories etc integrated with the fountain control system

nos. 1

b SAND FILTER

Supply of 400mm dia bobbin wound fibreglass and polyester resin anti corrosive sand filter with 1.5" connections, The filter shall be fitted

with easy access top lid with manual air purge, flat clamp for cover tightening, FRP Foot base and necessary accessories such as

glycerin filled pressure gauge, combination of manual sand and water drain etc., Filtration Velocity 35-40m³/hr/m², Flow rate = 10 m³/hr,

Maximum working pressure : 2.5 Bar including multiport valve of 1.5” dia connection with b0dy in ABS & Fibre glass distributor with

EPDM gaskets, un stainless steel with water tight shaft system max working no head loss, maximum working pressure 3.5 kg/cm2

nos. 3

MAKE: AQVASTAR or Equiv

c FILTER MEDIA

Supply, installation, testing and commissioning ofSand Media Size: 0.5 -1mm & Milled down to remove sharp points NO. 9

Supply, installation, testing and commissioning of GRAVEL Size: 3 -7mm packed in 25 Kg bag. NO. 3

MAKE:

d Re circulation Pump( Duty Only )

Supply of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated

along with IP-55 protection- class F continuous rating. Pump shall be of one piece body made in fiberglass and reinforced polypropylene,

integrated prefilter with strainer basket,fast opening translucent transparent polypropylene lid, easy opening knob system, 316 SS Shaft

and mechanical seal. Self priming at 1m, Impeller : Plastic impeller, 63mm suction & 63mm return union connections, Horse power : 0.50

HP, 0.37 Kw, Phase : 1 phase 240v, Flow rate = 7 m³/hr @ 10 m water head.

NO. 3


MAIN BASIN FITTINGS

e Main Drain

Supply of Square Main Drain in ABS Frame & Grille - 10 cu mtr/hr circular in size NO. 3


f Vacuum Point

Supply of Vacuum Point & Plug nos. 3


g Wall conduit

Supply of Wall Conduit for vacuum point with external solvent connection. 300mm long nos. 3


h Return Inlet

Supply of Adj Floor / Wall Inlet -2" threaded connection- Flow 9m3/h with topsurface to match with tile floor nos. 6


CHEMICAL EQUIPMENT

i Chemical feeder

Supplying of chemical feeder 9 Kgs capacity nos. 3


UV System

j UV System




Supplying of BLUE LAGOON UVC Ioniser system with 40W capacity with 5 Cu mtr /hr nos. 3

CODE: UVC Ioniser 40W / Tech /Timer


FOUNTAIN NOZZLES

k Cascade nozzles

supplying & installing ing & installing of Cascade Nozzle 11/2 " made in SS 316 , water level dependent design, monolithic rugged body

for long life & better performance

nos. 1


l Cascade nozzles

supplying & installing ing & installing of Cascade Nozzle 1 " made in SS 316 , water level dependent design, monolithic rugged body for

long life & better performance

nos. 8


m Foam Nozzles

supplying & installing ing & installing of FOAM Nozzle 11/2 " made in SS 316 , water level independent design, monolithic rugged body

for long life & better performance

nos. 10


n Rotating nozzles

supplying & installing ing & installing of ROTATING Nozzle 11/2 " made in SS 316, comes with rotating arrangement inbuilt with guides

to rotate appropriately. water level independent design, dilithic rugged body for long life & better performance

nos. 20


o Peacock Nozzles

supplying & installing ing & installing of PEACOCK Nozzle 1 " made in SS 316/ Brass , water level independent design, monolithic

rugged body for long life & better performance

nos. 11


p Circular Inverted Arch Jets

Supplying & Installation of Circular pipe arrangement with UPVC with clear stream nozzles of 1/2" to create inverted ARCH ( Dia of 2.5

Mtr)

nos. 3

q High Spray Jets

supplying & installing & installing of HIGH SPRAY NOZZLE 3" " made in SS 316 , water level independent design, monolithic rugged

body for long life & better performance

nos. 1

PUMP FOR NOZZLES

r supplying, installation, testing and commissioning of submersible Mono-bloc pump capable of delivering LPM ( 30m3/hr) @ 16 mtr head

to ensure ideal effect been designed. Model no to be highlighted by Contractor while quoting. Catalogue to be submitted by Contractor

nos. 3

s supplying, installation, testing and commissioning of submersible Monobloc pump capable of delivering LPM ( 25m3/hr) @ 12 mtr head


nos. 3

t supplying, installation, testing and commissioning of submersible Monobloc pump capable of delivering LPM ( 50m3/hr) @ 6 mtr head to

ensure ideal effect been designed. Model no to be highlighted by Contractor while quoting. Catalogue to be submitted by Contractor

nos. 1

u supplying, installation, testing and commissioning of submersible Mono-bloc pump capable of delivering LPM ( 30m3/hr) @ 12 mtr head


nos. 1

v

supplying, installation, testing and commissioning of submersible Mono-bloc pump capable of delivering 698LPM ( 42m3/hr) @ 16 mtr

head to ensure ideal effect been designed. Model no to be highlighted by Contractor while quoting. Catalogue to be submitted by

Contractor

nos. 1

w

supplying, installation, testing and commissioning of submersible Mono-bloc pump capable of delivering 1200LPM ( 72m3/hr) @ 15 mtr

head to ensure ideal effect been designed. Model no to be highlighted by Contractor while quoting. Catalogue to be submitted by

Contractor

nos. 1


LIGHTING for Nozzles

x Under Water Ring light

Stainless Steel Facia/ Aluminium body Ring light 12W/12V (WW,CW Options avl ) nos. 50


Transformer

y Supplying of low voltage underwater lighting transformer with internal thermal switch & auto reset. 100W, 130VA / 24 V. IP65 Protectionnos. 4


z Fog Generator




Supply, installation, testing and commissioning of Fog generator for the above fountain area including all machinery, accessories, piping,

cabling, nozzle, compatible to cover the entire fountain area upto a height of 2 meters above ground and controlled by the main fountain

controller.

nos. 9

CONTROL AND REGULATORY VALVES

aa All valves shall be in PVC with PN10 rating and EPDM seat. nos. 5

PIPES AND FITTINGS

ab PVC pipe 10 kg/sqcm including fittings where required e.g. tees, bends. 10 kg/cm2 pressure . Measured in meters as per drawing

LS. 3

MAKE:SUPREME/ FINOLEX

LIGHT CABLING

acSupplying of copper cable with PVC conduits from junction boxes to transformer & transformer to control panel. ( length in mters as per

drawing)

LS. 3

CONTROL PANEL

ad

Supplying & Installation of CONTROL PANEL Capable to control all pumps with 15VFD to do the variation of the flow in each water

feature effects. This panel shall be able to control all lights, Running jets. with SD card provision & SD Card with design pattern of the

fountain performance. Programmable software compatible to the existing DMX controller.

nos. 3


157

Designing, providing & fixing the vertical wall Garden with MS base structure in such a manner that the plants root in a structural support

which is fastened to the wall itself. The plants receive water and nutrients from within the vertical support instead of from the ground with

motorised Irrigation system to ensure the proper water to the plants including of Vertical Green Modules, Weed & Vertical Geo Bags,

GMS Pilaster, GMS Brackets along with SS 304 fasteners with Solenoid valve & arrow drippers along with fertigation unit.Supply of

Suitable Plants for indoor/outdoor, Imported ZTC soiless media ( or equivalent as approved) , control valves, PVC pipes, LLDP, NRV,

required fittings etc. Entire design of structure in Modules & Panels with all necessary components to complete the structure & make

Vertical Garden. This includes 2 coat primer along with Duco Paint to the ms structure & Developing and establishing of plants in Nursery

for a period of 10 to 12 weeks as per the species requirement, Mortality of plants, Transportation, Miscellaneous etc.

sqm 1,008.00

158

GRC: Supplying in position for all leads & lifts at specified locations 25mm thick Glass Fibre Reinforced Concrete (GRC) Jali with 50mm

thick Border on the front and both side of building as per the approved design, drawings & finishes as per the requirement of Project

Manager as per the Sizes at site, including all tools, tackles, fixtures, accessories, nut, bolt, anchors, welding, etc. all complete as per

site requirements & instructions of Project Manager. ( Fastener MAke- Hilti)

The GRC to be produced with Alkali ressistant Glass Fibre, High Silica Sand and White cement in accordance with relevant Indian

Codes, ASTM Standards (C1116 & C1116M) and Precast Institute (U.S.A) manual 128 EDN 4 conforming to the approved drawings of

client. MS frame will be paid in MS Item only.

sqm 1,512.00

159

Supply, laying, extruded clay face bricks of size 230x75x17 of terracotta shade, weather resistant, maintenance free, high thermal

insulation of U value of 0.6 w/m2k, fire resistant upto 4 hours, low water absorption and high compressive strength as per the latest IS

code. The rate shall include all mortar, fixing materials. The type of joints shall be as per the architects approval. Sq.m. 500.00

160Supply and laying of round shaped river pebbles white color of size 3”, 4”, 5” dia as approved by the design consultant complete as

required.kgs 2,000.00

STREET FURNITURES

BENCHES

161

Supply, installation of Single bench of size 1500mmx 650mmx 480mm with armrest, resting on two small cylindrical steel columns with

cast feet. The seat is made of polished Salwood planks spaced at 15mm c/c in a direction perpendicular to the length of the bench. The

back rest consists of steel strips bolted at each end of the main frame. The item shall include all civil works to fix the bench in place as

per the site conditions as approve by the Engineer in charge/ Consultant complete as required. Approved make: Keselec Schreder,

Arihant, Jindal Furniture.

NO. 80.00




162

Supply, installation of Chair and table seating in wooden planks and framing in wrought iron for kiosk area. The item shall include all civil

works to fix the Chairs and tables in place as per the site conditions as approve by the Engineer in charge/ Consultant complete as

required. Spproved Make: Smart Storey or equivNO. 50.00

163 Supply, installation of Pergola of mentioned size fabricated out of cast iron including civil works complete as required NO. 6.00

164Supply, installation of Stone Benches bench made up of HPC (High Performance Concrete), linear or 45° section, with a steel central

support component of mentioned size of approved design including civil works complete as requiredNos 50.00

165Supply, installation, commissioning of 50 meter high Flag Pole with motorized hoisting arrangement complete as per specifications as

required. The vendor shall provide the design as per the location and approved by the consultant. Rate shall include all civil worksSet 1.00




INFORMATION/WAY FINDING SIGNAGES

166

Supply, installation, testing and commissioning of Project Signage- Stand alone over free standing wall including all structural works- with

light fixtures complete as required. The item shall include all civil works to fix the signage in place as per the site conditions as approve

by the Engineer in charge/ Consultant complete as required. Approved Make: Claude Neo Signs, Sign Sutra, Scratchpad.Sq.m. 60.00

167

Directional signage mounted over pole – backlit including poles, structural steel etc complete as required. The item shall include all civil

works to fix the signage in place as per the site conditions as approve by the Engineer in charge/ Consultant complete as required.

Approved Make: Claude Neo Signs, Sign Sutra, Scratchpad.Sq.m. 50.00

DUST BIN

168

Supply, installation of Floor mounted die cast Aluminium litter bin fixed on a concrete base. Access to the rotation- moulded

polypropylene inner basket, faciliated by a strut that keeps the top open or closed. Size 500x500x1200mm. The item shall include all civil

works to fix the dustbin in place as per the site conditions as approve by the Engineer in charge/ Consultant complete as required.

Reference image attached. Approved make: Keselec Schreder, Arihant, Jindal Furniture.

NO. 350.00

SOFTSCAPE WORKS

169 Supplying and stacking of fertilizers at site including royalty and carriage. kg. 742.50

170Supplying and stacking of Insecticides, Pesticides and Weedicides at site including royalty and carriage. DURSBAN or equivalent 1 to 2

lts/200 lts of water and sprayed.lts. 26.70

171Supply and stacking at site soil amendment additives to improve soil quality at site based on soil test report.

kg. 4.50

172 SUPPLY OF TREES

Supplying, staking, planting and Complete maintenance of trees, shrubs and groundcovers as per specifications mentioned as per

approval of the architect or as per approval and direction of engineer-in-charge the entire garden features i.e. trees, shrubs, hedge,

groundcover creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, removal of garden

waste,watering and removal of unserveiceable material’s, applying insecticide, pesticide &

fertilizers(whenever required) top dressing with good earth and manure andand mandatory maintenance of 12 months including

replacement of unhealthy and dead plants in the maintenance period. garden related works as directed by office-in-charge (Cost of

Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided seperatly ,other T & P aterial/articles shall be provided by the

contractor.)

HEIGHT CALIPE

R

MULTI-

BRANCHING

A. Cassia javanica no. 38 +2.0m 45mm +1.2m

B. Cassia fistula no. 24 +2.0m 40mm +1.2m

C. Choresia speciosa no. 12 +2.5m 50mm +1.2m

D. Chukrasia tabularis no. 2 +3.5m 70mm +1.5m

E. Delonix regia no. 58 +2.5m 50mm +1.2m

F. Ficus benjamina no. 6 +2.0m 40mm +1.0m

G. Ficus lyrata no. 78 +3.5m 65mm +1.2m

H. Magnolia grandiflora no. 23 +2.0m 40mm +1.2m

I. Peltophorum ferrugineum no. 26 +2.5m 50mm +1.2m

J. Plumeria rubra no. 54 +2.0m 40mm +1.5m

K. Roystonea regia no. 22+3.5m 150mm

Min 5 fronds per

tree

l. Swietenia mahogany no. 35 +2.5m 50mm +1.2m

173

A. Cynadon Dactylon Sqm. 3487 Carpet Effect

174No.per sqm TOTAL NO. HEIGHT SPREAD MULTI-

BRANCHING

A. Barleria Cristata Sqm. 800 10 8000+0.45m +0.60m

Bushy, multi-

branching

B. Beloperone guttata 1200 10 12000

+0.30m +0.60m

Bushy, multi-

branching

SUPPLY OF SHRUBS & GROUND COVERS

SUPPLY OF GRASS




C. Canna hybrid red Sqm. 1000 25 25000+0.30m +0.45m

Bushy, multi-

branching

D. Ficus blackiana 700 10 7000

+0.45m +0.60m

Bushy, multi-

branching

E. Ficus kingbush Sqm. 1300 10 13000+0.45m +0.60m

Bushy, multi-

branching

F. Ficus longisland 900 10 9000

+0.45m +0.45m

Bushy, multi-

branching

G. Ficus panda Sqm. 1500 10 15000+0.45m +0.60m

Bushy, multi-

branching

H. Hamelia patens 500 10 5000 +0.45m +0.45m Bushy, multi-

branching

I. Hymenocallis speciosa Sqm. 330 25 8250+0.30m +0.45m

Bushy, multi-

branching

J. Jasmine pubescens Sqm. 305 25 7625 +0.45m +0.45m Bushy, multi-

branching

TOTAL RS. 0.00


DESCRIPTION OF ITEM UNIT QTY. RATE (RS.) AMOUNT (RS.)...

Documents

Transcript of DESCRIPTION OF ITEM UNIT QTY. RATE (RS.) AMOUNT (RS.)...