Curriculum Vitae

of Prof. Dr.

MAHMOUD MOHAMED AHMED MOHAMED

1. PERSONAL INFORMATION

Name : Mahmoud Mohamed AhmedSurname : MohamedSex : MaleDate of Birth : 27/5/1967Place of Birth : Gohaina, Sohag, EgyptNationality : EgyptianMarital Status : MarriedNumber of Children : ThreeOccupation : Professor from Nov. 28, 2010Major area : Mining and Metallurgical EngineeringSpecialization area : Mineral Processing and Recycling of WastesPermanent address : Mining Eng. Dept., Faculty of Eng.,

Assiut Univ., Assiut 71516, EgyptPassport number : A08112602, EgyptE-mail address : mahmoudahmed6666@yahoo.com

: mamoah@aun.edu.eg

Tel. : 002 088 2351263 or 002 093 4700413 Home 002 010 16629374 Mob. 002 010 68308275 Mob. 002 088 2411231 or 002 088 2411786 Office

Fax. : 002 088 2332553 or 002 088 2336672

2. SCIENTIFIC DEGREES

-B.Sc. “Mining and Metallurgical Engineering”, Faculty of Engineering, Assiut University, Assiut, Egypt, May 1990.-M.Sc. “Mining and Metallurgical Engineering”, Faculty of Engineering, Assiut University, Assiut, Egypt, July 1995.Thesis title: “Kinetics of Maghara Coal Flotation”-Ph.D. “Mining and Metallurgical Engineering”, Faculty of Engineering, Assiut University, Assiut, Egypt, September 1999 (a scientific channel for two years at Max-Planck Institute, Germany).Thesis title: “Fractal Surfaces of Particles and Their Floatability”

1

3. OCCUPATIONS

-Demonstrator, Mining and Metallurgical Engineering Dept., Faculty of Engineering, Assiut University, Assiut, Egypt, 1991-1995.-Assistant lecturer, Mining and Metallurgical Engineering Dept., Faculty of Engineering, Assiut University, Assiut, Egypt, 1995-1997.-Two years from 1997-1999, at Max-Planck Institute-Germany, to conduct the experimental part of Ph.D. program in a scientific channel system.-Assistant Professor, Mining and Metallurgical Engineering Dept., Faculty of Engineering, Assiut University, Assiut, Egypt, 1999 to 2004.-Associate Professor, Mining and Metallurgical Engineering Dept., Faculty of Engineering, Assiut University, Assiut, Egypt, 2004 to 2009.-Professor, Mining and Metallurgical Engineering Dept., Faculty of Engineering, Assiut University, Assiut, Egypt, Nov. 28, 2010.

4. TEACHING EXPERIENCE

I have taught the following courses for undergraduate students:

-Coal Concentration and Preparation.-Froth Flotation and its Applications.-Planning and Design of Mineral Processing Plants.-Mineral processing (2).-Mineral Processing.-Hydrocyclone: Theory and Application.-Recent Trends in Comminution Operation.-Surveying Calculation and Computer.-Applications of Computer in Mining Engineering.

I have participated in teaching the following courses for undergraduate students:

-Mine Machinery.-Mineral Processing 1.-Chemical Engineering.

I have taught the following courses for postgraduate students:

-“Flotation Theories”, M.Sc. Students.-“Determination of the Size Analysis for Fine Particles”, Ph.D. Students.-“Recent Applications of Flotation”, Ph.D. Students.-“Applications of Computer in Mining”, Diploma in Exploration of ores.

2

-“Recycling and Management of Solid Wastes”, Diploma in Environmental Engineering.

5. PROJECTS

“Mineral Processing Projects”, B.Sc. Students from 2000 to date:a. Leaching of Red Sea Phosphate Ore (1999/2000).b. Survey of Gravity Concentration Machines to Prepare Coal (2001/2002).c. Plant Design and Process Control of Maghara Coal Flotation (2002/2003).d. Hydrocyclone as a Separation Tool (2005/2006).e. Grinding of Some Preheated Rocks (2007/2008).f. Hydrocyclone as a Dewatering Tool (2008/2009).g. Statistical Analysis in Jigging Process (2010/2011).h. Optimization of Flotation Process Parameters (2012/2013).

“Mine Surveying Projects”, Third Year Students from 2000 to Date.

“Utilization of East Sebaeya Phosphate Processing Plant Tailings”, A Research Project Carried out for the Academy of Scientific Research and Technology, Egypt, 2003-2004.

6. MAJOR RESEARCH TOPICS

1. Unit Operations in Mineral Processing.2. Crushing and Grinding Processes.3. Leaching Processes.4. Flotation Processes.5. Gravity Separation Processes.6. Sedimentation, Filtration, and Drying Processes.7. Concentration Methods and Upgrading of Metal Ores.8. Recycling of Solid Wastes.9. Design and Planning of Mineral Processing Plants.10.Fractal Characteristics of Fine Particles.11.Image Analysis Systems by Computer.12.Analysis of Size, Shape, and Surface Roughness of Particles.

7. LANGUAGES

-English : “Score 6.0” of “International ELTS”.-German : “Grundstufe 2” at Goethe Institute, Goettingen, Germany.

3

8. PROFESSIONAL SOCIETIES

1- A reviewer at the “Journal of Hazardous Materials”, Published by Elsevier.2- A reviewer at the “Journal of Mineral Processing and Extractive Metallurgy (Trans. Inst. Min Metall. C)”, Published by Maney.3- A reviewer at the “International Journal of Mineral Processing”, Published by Elsevier.4- A reviewer at the “Journal of Cleaner Production”, Published by Elsevier.5- A member of “Who's Who“, in Engineering Higher Education (WWEHE), Reference (whoswho-593084), USA.6- A member of “Egyptian Engineering Syndicate”.7- A member of “Engineering Consulting Center”, Faculty of Engineering, Assiut University.8. A member of “The Arab Mining&Petroleum Association”, 28 Ramsis Street, Cairo 11669, Egypt.

9. SUPERVISION AND REFEREEING OF THE SCIENTIFIC THESES و RESEARCHES, AND PROJECTS

I Have Been a Supervisor of the Following Scientific Theses:

1. M.Sc. Theses:a. Beneficiation of Egyptian Talc Ore (It was discussed and the researcher obtained M.Sc. degree, 2007).b. Concentration of Alumina from Gibbsite Bearing Shale in South Western Sinai (It was discussed and the researcher obtained M.Sc. degree, 2008).

2. Ph.D. Theses:a. Study of Separation Behavior in the Three-Product Hydrocyclone (It was discussed and the researcher obtained Ph.D. degree, 2010).

I Was a Member of the Refereeing Committee of the Following Theses:a. Beneficiation of Egyptian Talc Ore, Assiut University, 2007.b. Concentration of Alumina from Gibbsite Bearing Shale in South Western Sinai, Assiut University, 2008.c. Study of Separation Behavior in the Three-Product Hydrocyclone, Assiut University, 2010.

4

I Have Refereed the Following Researches:1. "Acidic Leaching and Precipitation of Zinc and Manganese from Spent Battery Powders Using Various Reductants", Journal of Hazardous Materials, 2009.2. "Decomposition of Chromite Ore by Oxygen in Molten NaOH-NaNO3", International Journal of Mineral Processing, 2010.3. "An Automated Aggregate Classification System with Feature Selection Techniques and Hierarchical Neural Network", International Journal of Mineral Processing, 2010.4. "Cleaner Production of Soapstone of the Ouro Preto Region - Brazil: A Case Study", Journal of Cleaner Production, 2011.5. "Separation of Calcite from Hematite Using Saccharomyces Cerevisiae", International Journal of Mineral Processing, 2011.6. "Effect of Reduction of Refractory Hematite by Hydrogen on follow-up magnetic separation", International Journal of Mineral Processing, 2013.7. " Fine coal dry beneficiation using autogenous medium in a vibrated fluidized bed", International Journal of Mineral Processing, 2013.

اآلتية: المشاريع كيم تح في االشتراك الصناعة قطاعي في استهالكها وترشيد روالصخو للرمال المادية الطاقة. 1

محلية مناطق من الحرارية االكاسيد من والعديد السليكا باستخالص والفن السعودية العربية بالمملكة الصناعات لبعض كأساس وتوظيفها مختلفة ،السعودية العربية المملكة جدة، عبدالله، الملك جامعة ،جماليا منها واإلفادة م.2011

الفوسفات لتركيز النانو حجم في الميكروإميلشن حبيبات استخدام .2 العربية المملكة جدة، عبدالله، الملك جامعة ،الجودة منخفض السعودي م.2011 ،السعودية

10. LIST OF PUBLICATIONS

[1] Tarshan, M.M., Ibrahim, G.A. and Ahmed, M.M., "Effect of particle size on separation efficiency of Maghara coal flotation", Al-Azhar Engineering Fourth International Conference, Fac. of Engng., Al-Azhar Uni., Cairo, Egypt, Vol. 9, Mining Engineering, Dec. 16-19, pp. 142-150, 1995.[2] Ahmed, M.M., Stechemesser, H., Mabrouk, S.A., Ibrahim, G.A. and Tarshan, M.M., "The relationship between the surface roughness, shape and detachment

5

force of particles from the liquid/gas interface using centrifuge method", 49 Berg-und Huettenmaennischer Tag, Kolloquium 2, Partikeltechnologie, Freiberg, Germany, 18 und 19 Juni, pp. 207-223, 1998.[3] Ahmed, M.M., Stechemesser, H., Mabrouk, S.A., Ibrahim, G.A. and Tarshan, M.M., "Image analysis technique for determination of the size, structure and texture of fine particle profile", The 6th International Conference on Mining, Petroleum and Metallurgy, Vol. I-B, Mineral Processing, Fac. of Engng., Cairo Uni., Cairo, Egypt, February 20-24, pp. 40-56, 1999.[4] Stechemesser, H. and Ahmed, M.M., "Flotation-shape and surface roughness", 50 Berg-und Huettenmaennischer Tag, Kolloquium 2, Sortierung der Abfaelle und Mineralischen Rohstoffe, Freiberg, Germany, 16 bis 18 Juni, pp. 120-131, 1999.[5] Ahmed, A.A., Rizk, A.M.E. and Ahmed, M.M., "A contribution to comminution in tumbling mills", The seventh International Conference on Mining, Petroleum and Metallurgical Engineering (MPM), Faculty of Engng., Assiut University, February 10-12, pp. 192-197, 2001.[6] Ahmed, M.M., Ahmed, A.A. and Rizk, A.M.E., "Some considerations on the Bond work index test", The seventh International Conference on Mining, Petroleum and Metallurgical Engineering (MPM), Faculty of Engng., Assiut University, February 10-12, pp. 332-343, 2001.[7] Rizk, A.M.E., Ahmed, M.M. and Ahmed, A.A., "Application of a factorial method on leaching process of calcareous phosphate ore", Bulletin of the Faculty of Engineering, Assiut University, Vol. 29, No. 2, pp. 185-197, May, 2001.[8] Ahmed, M.M. and Rizk, A.M.E., "On the attritioning of stirred slurries", Journal of Engineering Sciences, Assiut University, Vol. 31, No. 1, pp. 175-185, January, 2003.[9] Ahmed, A.A., Ahmed, M.M. and Rizk, A.M.E., "Preheating as an aid in comminution process", Journal of Engineering Sciences, Assiut University, Vol. 31, No. 4, pp. 985-994, October, 2003.[10] Ahmed, M.M., "Optimization of operating variables of coal flotation process", Journal of Engineering Sciences, Assiut University, Vol. 32, No. 2, pp. 993-1003, April, 2004.[11] Boghdady, G.Y., Ahmed, M.M., Ibrahim, G.A. and Hassan, M.M.A., "Petrographical and geochemical characterization of some Egyptian talc samples for possible industrial applications", Journal of Engineering Sciences, Assiut University, Vol. 33, No. 3, pp. 1001-1011, May, 2005.[12] Ahmed, M.M., Ahmed, S.S., "A Comparison study to determine the mean of particle size distribution for truthful characterization of environmental data (Part 1)", Journal of Engineering Sciences, Assiut University, Vol. 36, No. 1, pp. 147-166, January, 2008.[13] Ahmed, M.M., Ibrahim, G.A., Elaassy, I.E., Ahmed, G.A., "Flotation of alumina from gibbsite bearing-shale of south western Sinai, Egypt by using sodium dodecyl sulfate", Journal of Engineering Sciences, Assiut University, Vol. 36, No. 3, p.p. 731-747, May, 2008.

6

[14] Ahmed, M.M. and Boghdady, G.Y., "Comminution of different granite samples of South Eastern dessert of Egypt", Journal of Engineering Sciences, Assiut University, Vol. 37, No. 1, pp. 147-160, January, 2009.[15] Ahmed, M.M., Ibrahim, G.A., Mouafi, A.A., Ahmed, H.G., "Optimization of alumina flotation from gibbsite bearing-shale using sodium oleate as a collector", 11th International Conference on Mining, Petroleum and Metallurgical Engineering (MPM11), Faculty of Petroleum and Mining Engng., Suez Canal University, Sharm El-Sheikh, Egypt, 15-19 March, pp. 578-590, 2009.[16] Ahmed, M.M. , "Statistical design application and analysis of separation efficiency in Davis tube tester", Journal of Engineering Sciences, Assiut University, Vol. 38, No. 4, July, 2010.

INTERNATIONAL JOURNALS:

[1] Ahmed, M.M., "Discrimination of different models in the flotation of Maghara coal", Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), August 2004, Vol. 113, C103-110, 2004.[2] Ahmed, M.M., "A contribution to a new measure for evaluation of a particle size distribution", Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), Vol. 116, No. 4, pp. 221-229, 2007.[3] Ahmed, M.M., Ibrahim, G.A. and Hassan, M.M.A., "Improvement of Egyptian talc quality for industrial uses by flotation process and leaching", Int. J. Miner. Process., Vol. 83, pp. 132-145, 2007.[4] Ahmed, M.M. Ibrahim, G.A., and Farghaly, M.G., "Performance of a three-product hydrocyclone", Int. J. Miner. Process., Vol. 91, pp. 34-40, 2009.[5] Farghaly, M.G., Neesse, T., Golyk, V., Ibrahim, G.A., and Ahmed, M.M., "Controlled wash water injection to the hydrocyclone underflow", Minerals Engineering 23, pp. 321-325, 2010.[6] Ahmed, M.M., "Effect of comminution on particle shape and surface roughness and their relation to flotation process", Int. J. Miner. Process. Vol. 94, pp. 180-191, 2010.[7] Ahmed, M.M., Ibrahim, G.A., Elaassy, I.E., and Ahmed, H.G., "Upgrading of Al2O3 in gibbsite of Sinai (Egypt) Shale by Sodium dodecyl sulfate", Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), Vol. 120, No. 1, pp. 15-20, 2011.[8] Ahmed, M.M., "Optimization of a jigging process using statistical technique", International Journal of Coal Preparation and Utilization, Volume 31, Issue 2, pp 112-123, 2011.[9] Mahmoud M. Ahmed, Galal A. Ibrahim and Mohamed M.A. Hassan (2011). Beneficiation of Talc Ore, Earth and Environmental Sciences, Imran Ahmad Dar and Mithas Ahmad Dar (Ed.), ISBN: 978-953-307-468-9, InTech, Available from: http://www.intechopen.com/articles/show/title/beneficiation-of-talc-ore

7

[10] Farghaly, M., Serwa, A. and Ahmed, M.M., "Optimizing the Egyptian Coal Flotation Using an Artificial Neural Network", Journal of Mining World Express, Vol. 1, Issue 2, pp. 27-33, Oct. 2012.

11. CONFERENCE PROCEEDINGS

[1] The 49 Berg-und Huettenmaennischer Tag, Freiberg, Germany, 18 und 19 Juni, (1998).[2] The International Conference for Environmental Hazard Mitigation, Cairo University, Egypt, September 9-12, (2000).[3] The Seventh International Conference on Mining, Petroleum and Metallurgical Engineering (MPM), Faculty of Engng. , Assiut University, Egypt, February 10-12, (2001).[4] The Second International Conference on the Geology of Africa, Faculty of Science, Assiut University, Egypt, October 28-30, (2001).[5] The International Conference of Development and Environmental in Arabic World, Assiut University, Egypt, March 26-28, (2002).[6] The Eighth International Conference on Petroleum, Mining&Metallurgical Engineering, Faculty of Petroleum&Mining Engng. (I.C.P.M.M.E.), Suez Canal University, Egypt, March 17-19, (2003).[7] The Second International Conference of Development and Environmental in Arabic World, Assiut University, Egypt, March 23-25, (2004).[8] The Third International Convention on Education & Training, The Middle East Education Market, ACADEMIA EGYPT 2004, Conference on Quality Management and Accreditation of Higher Education in the Arab World, Under the Auspices of the League of Arab States and the Ministry of Higher Education & Scientific Research, Intercontinental Semiramis Hotel, Cairo, Egypt, Nov. 24-26, (2004).[9] Al-Azhar Engineering Eighth International Conference (AEIC), Faculty of Engineering, Al-Azhar University, Cairo, Egypt, Dec. 24-27, (2004).

[10] The Ninth International Conference on Mining, Petroleum and Metallurgical Engineering, Faculty of Engng., Cairo University, Egypt, Feb. 21-24, (2005).

[11] The First National Conference of the Development of Scientific Research System, Under the Auspices of M. H. Mubark, Cairo International Conference Center, Khofo Hall, Egypt, May 28-29, (2005).

[12] The Third International Conference for Development and Environment in the Arab World, Assiut University, Egypt, March 21-23, (2006).

[13] Fifth International Internet Education Conference, ICT-Learn, Towards Knowledge Society, Human&Technology Development Foundation, Ramses Hilton, Cairo, Egypt, Sept. 11-13, (2006).

[14] The Tenth International Mining, Petroleum and Metallurgical Engineering Conference, Faculty of Engng., Assiut University, Egypt, March 6-8, (2007).

8

[15] The Eleventh International Conference on Mining, Petroleum and Metallurgical Engineering, Faculty of Petroleum and Mining Engng., Suez Canal University, Sharm El-Sheikh, Egypt, March 15-19, (2009).[16] The Sixth International Conference on the Geology of Africa, Faculty of Science, Assiut University, Egypt, October 24-26, (2009).[17] The First International Conference on Nanotechnology for Society Development, Beni-Sueif University, Cairo, Egypt, May 4-5, (2010).

فى المحاجر و المناجم إلقتصاديات الرابع الدولى المعرض و . الملتقى18 األزهر مركز تصنيعا، و تجهيزا و إستخراجا و إستكشافا العربى العالم

م.2012 فبراير،23-21 نصر-القاهرة، للمؤتمرات-مدينة التعدينية, تحت الصناعات و الثروات لتعظيم قومية رؤية نحو . مؤتمر19

التعدينية، للصناعات التصديرى المجلس كذلك و تعدين و نهضة جمعية رعاية يناير،31 نصر-القاهرة، ستار-مدينة سيتى إنتركونتننتال السرايا-فندق قاعة

م.2013 فى المحاجر و المناجم إلقتصاديات الخامس الدولى المعرض و . الملتقى20

-26 نصر-القاهرة، للمؤتمرات-مدينة األزهر مركز ،Ecomine العربى العالم م.2013 فبراير،28

12. TRAINING, COMPUTER COURSES AND WORKSHOPS

[1] A training course in “MICROSOFT POWER POINT 2000”, Computer Center, Faculty of Agriculture, Assiut University, February, (2002).[2] A training course in “ELECTRON MICROSCOPY”, Electron Microscope Unit, Assiut University, April 6-11, (2002).[3] A training course in “SPSS V.10 FOR WINDOWS”, Computer Center, Faculty of Agriculture, Assiut University, December, (2003).[4] US-Egypt Workshop on “Advances in Science and Technology of Treatment and Utilization of Industrial Wastes”, Central Metallurgical R&D Institute (CMRDI), Helwan, June 6-10, (2004).[5] Training Courses on “Present and Future of Hazardous Wastes in Egypt”, Institute of Graduate Studies and research, Alexandria University, August 7-11, (2005).[6] A training workshop on “Training of Trainers TOT”, Post Graduate Library, Assiut University, April 1-5, (2008).[7] A training workshop on “Institutional Self-Evaluation for Higher Education”, National Authority for Quality Assurance and Accreditation of Education (NAQAAE), November 7-11, (2009).[8] A training workshop on “External Review for Higher Education Institutions”, National Authority for Quality Assurance and Accreditation of Education (NAQAAE), November 15-19, (2009).

9

13. PRIZES[1] One of members of "Prize of the best research of Engineering Sciences", Faculty of Engineering, Assiut University, Egypt, 2002.[2] One of members of "Prize of the best research of Engineering Sciences", Faculty of Engineering, Assiut University, Egypt, 2004.[3] "Prize of the best research of Engineering Sciences", Faculty of Engineering, Assiut University, Egypt, 2005.[4] "Prize of the best research of Engineering Sciences", Faculty of Engineering, Assiut University, Egypt, 2009.[5] "Prize of the best research of Engineering Sciences", Faculty of Engineering, Assiut University, Egypt, 2011.

: التدريس هيئة أعضاء قدرات تنمية دورات - 14 ،العمل" ضغوط و الوقت "إدارة التدريبي البرنامج في المشاركة- 1

-2 أسيوط، جامعة القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع م.2005 أبريل،5 فى الحديثة "اإلتجاهات التدريبى البرنامج فى المشاركة- 2

القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع ،التدريس" م.2005 يوليو،12-9 أسيوط، جامعة

،"2 العلمى البحث إدارة " التدريبى البرنامج فى المشاركة- 3 أسيوط، جامعة القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع

م.2006 فبراير،21-23 بإستخدام "التدريس التدريبى البرنامج فى المشاركة- 4

القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع ،التكنولوجيا" م.2007 فبراير،19-17 أسيوط، جامعة

،"المعتمدة الساعات نظام" التدريبى البرنامج فى المشاركة- 5-3 أسيوط، جامعة القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع

م.2007 ،نوفمبر 5 العملية فى الجودة معايير" التدريبى البرنامج فى - المشاركة6

القيادات، و التدريس هيئة أعضاء قدرات تنمية مشروع ،"التدريسية م.2008 ، مايو5-3 أسيوط، جامعة

المختلفة األنشطة و اللجان في المشاركة - 15بالقسم:

القسم. معامل تحديث و األجهزة فحص لجان في المشاركة-1 الفرق لطالب العلمية الرحالت جميع على شرافإال فى المشاركة-2

الجامعى العام من ذلك و بالقسم البكالوريوس طالب كذلك و المختلفة

10

زيارة شملت التى و م2003/2004 الجامعى العام إلى م1999/2000بالتخصص. تطبيقية عالقة ذات كجهات المناجم و المصانع من كثير

لجان تشكيل كذلك و الدراسى الجدول وضع لجنة فى المشاركة-3 العام إلى م2001/2002 الجامعى العام من ذلك و بالقسم متحاناتإال

العام إلى م2004/2005 الجامعى العام من و م2002/2003 الجامعى م.2005/2006 الجامعى

بالقسم. الفصلية متحاناتإال لجان فى المشاركة -4 و المناجم لهندسة السابع الدولى المؤتمر أعمال تنظيم فى المساهمة -5

2001 فبراير،12-10 أسيوط، جامعة الهندسة، كلية الفلزات، و البترولم.

الجامعى العام فى بالقسم الفلزات و المناجم جمعية على شرافإال -6 العام فى كذلك و م2003/2004 الجامعى العام و م1999/2000

هذه و م2005/2006 الجامعى العام و م2004/2005 الجامعى أن حيث بالقسم أساتذتهم مع الطالب تفاعل فى فعال دور لها الجمعية

الدراسى. العام بداية فى للطالب تعارف حفل عمل أنشطتها بين من الجامعى العام فى بالقسم العلمى للمؤتمر التجهيز و عدادإال -7

م.2000/2001 و المناجم لهندسة العاشر الدولى المؤتمر أعمال تنظيم فى المشاركة-8

م.2007 ، مارس8-6 ،أسيوط جامعة هندسة،ال كلية الفلزات، و البترول2011/2 الجامعى العام فى بالقسم بالهواء التعويم معمل على شرافإال-9

. م2012/2013 الجامعى العام و م0122011/20 الجامعى العام فى بالقسم الكمبيوتر معامل على شرافإال-10

. م2012/2013 الجامعى العام و م12

المختلفة األنشطة و اللجان في المشاركة - 16 الجامعة: و بالكلية

الجامعى العام من بالكلية الفصلية متحاناتإال أعمال في المشاركة-1.اآلن إلى م1999/2000

الهندسة )كنترول( لقسم الدرجات رصد لجان أعمال فى المشاركة-2الميكانيكية. الهندسة لقسم و المدنية، الهندسة قسم الكهربية،

و الحقوق )كنترول( بكلية الدرجات رصد لجان أعمال فى المشاركة -3.حمادى بنجع األلومنيوم بمعهد و التربية بكلية كذلك

فى البيئة و للتنمية الثانى الدولى المؤتمر أعمال تنظيم فى المساهمة-4 م.2004 مارس،25-23 أسيوط، جامعة العربى، الوطن

الجامعى للعام الطالب تحادإ نتخاباتإ على شرافإال فى المساهمة-5 العام فى كذلك و م2004/2005 الجامعى العام فى و م2002/2003

. م2007/2008 الجامعى

11

الجامعى العام فى بالكلية الرحالت و جتماعيةإال اللجنة رائد -6. م2004/2005

أول من بتداءاإ بالكلية الهندسية ستشاراتإال و الدراسات مركز عضو-7اآلن. حتى م2000 يوليو

الثالث الدولى الملتقى فى أسيوط جامعة معرض تنظيم على شرافإال-8 التعليم عتمادإ و جودة إدارة مؤتمر و التدريب و العالى التعليم و للتربية 26-24 نتركونتنننتال،إ سميراميس فندق العربى، الوطن فى العالى

م.2004 نوفمبر،-2004 بالكلية، اإلعتماد و الجودة توكيد مشروع أعمال فى المشاركة-9

م.2006 فى البيئة و للتنمية لثالثا الدولى المؤتمر أعمال تنظيم فى المساهمة-10

م.2006 مارس،23-21 أسيوط، جامعة العربى، الوطن تقوم التى و بالكلية الطالبية األسر أحد وهى مصر أمل أسرة رائد-11

ذلك و لهم مختلفة أنشطة عمل و بعضها و الطالب بين الصالت بتوثيق. م2007/2008 الجامعى العام فى

على عاما خمسون بمرور الكلية إحتفالية أعمال تنظيم فى المشاركة-12 م.2008 أبريل،10-8 الذهبى(، )عيدها تأسيسها

لمشروع طبقا الهندسة بكلية الخاصة اللوائح مراجعة في المشاركة-13 م.MIS، 2008-2009 اإلدارية المعلومات نظم تطوير

و المعايير إطار فى للكلية الذاتية الدراسة عمل في المشاركة-14 بهدف اإلعتماد و الجودة لضمان القومية الهيئة أصدرتها التى اإلرشادات

لمؤسسات الذاتي التقويم لوثيقة طبقا ذلك و اإلعتماد على الحصول م.2010-2009 العربية، مصر لجمهورية العالي التعليم

اإلعتماد و الجودة لضمان القومية الهيئة من المراجعين فريق مرافقة-15 13-10 اإلعتماد، على للحصول الكلية تقدم إطار في للكلية الزيارة أثناء

م.2010 مايو،201 الجامعى العام فى الفلزات و التعدين هندسة قسم كنترول رئيس-16

. م2012/2013 الجامعى العام و م1/2012

12