DEPARTMENT OF MECHANICAL ENGINEERING 17th … Engineering... · Dairy Tech., Water Sanitation and...
Transcript of DEPARTMENT OF MECHANICAL ENGINEERING 17th … Engineering... · Dairy Tech., Water Sanitation and...
DEPARTMENT OF MECHANICAL ENGINEERING 17th July 1950
A Brief Profile and Progress Report(2012-2017)
Param Guru Huzur Mehtaji Maharaj, August Founderof DEI Engineering College, Ex Chief Engineer PWDPunjab, Chancellor Medalist of Thompson College ofCivil Engineering Roorkee, inaugurating Workshop ofEngineering College, Dayalbagh in 1953
Presentation Outline
Department profile
Programmes offered
Teaching/Learning milestones
Research highlights
Collaborations
Facilities available
Outreach
Future roadmap
Brief Departmental Profile
Teaching Staff
12 Ph.Ds. (50 %)
Teaching Staff : 22
No. of Students : 371
Teacher-Student Ratio : 1:17
Prof. Ranjit Singh was given UGC Emeritus Fellowship in 2017.
Designation No. of Faculty
Professors 6
Associate Professors 2
Assistant Professors 11
Emeritus Professors 3
Total 22
Students Enrolment Profile
Women Enrolment : 18 %
Brief Departmental Profile
S.No. CoursesMechanical
MaleStudents
Female Students
1. B.Tech - I year 57 152. B.Tech – II year 69 113. B.Tech– III year 58 114. B.Tech– IV year 50 185. M.Tech– I year 24 Nil6. M.Tech– II year 13 Nil7. M.Tech(Part-Time)–I Yr 10 18. M.Tech(Part-Time)–II Yr 6 Nil9. M.Tech(Part-Time)–IIIYr 5 Nil
10. M.Tech(Part-Time)–IVYr 4 Nil11. Ph.D. 9 Nil12. Ph.D. (Part Time) 10 Nil
Total 315 56
1. Programmes Offered
Programmes Offered• B.Tech. Mechanical Engg. • B.Tech. Mechanical Engg. with specialization in Industrial Engineering• B.Tech. Mechanical Engg. with specialization in Computer Science• M.Tech. in Engineering Systems• M.Tech. in Engineering Systems (Part-time)• Ph.D.(Interdisciplinary courses and Departments involved)
Electrical EngineeringCivil Engineering
Total Quality Management (TQM) and Continuous and Sustainable Development (KAIZEN) are the hall marks of our curriculum
1. New courses introduced
Value Engineering
Design of Thermal Systems
Industrial Heat Exchangers
Additive Manufacturing
Integrated Supply Chain Management
Academic ProgramMechanical Engineering
B. Tech. degree with broad based curriculummultidisciplinary approach and socially relevant education
Design Engineering
Production Engineering
Industrial Engineering
Thermal Engineering
Computer Science Specialization Industrial Engg. Specialization
M. Tech. in Engineering Systems Integrated MBA
Integrated M. Tech in Engineering Systems
Ph. D. in Mechanical Engineering Integrated Ph. D. in Mechanical Engineering
Curricular Design and Development
1.2 Academic flexibility
2. Teaching-Learning-Evaluation
Achievements : Awards – Students
2.6 Student Performance and Learning Outcome
Awards : 12
Alumni Achievements :
Awards: 50
Success in National Competitive Exams in last 5 yrs
GATE : 109
COURSES OFFERED/SUPPORTED BY WORKSHOP
Workshop Practice-I & II for B.Tech. (CE/EE/ME/FwT)
Workshop Practice for B.Voc. (Renewable Energy, Automobile,
Dairy Tech., Water Sanitation and Solid Waste Management), B.Arch., D.Arch., Diploma in Engg. (ME/EE/Auto.)
Model Making (Mechanical) – Co-Curricular Activities
Furniture Design – Work Experience Course
In-house Practical Summer Training
Product Manufacturing Project (PMP)
Design Engineering/ Theme Development (DE/TD) Project
Production Engineering Lab.
Automated Manufacturing Systems Lab. (UG & PG)
UG/PG Projects
Placement of students in the last five years
Batch Year Participated Students Placed
2012-13 65 65
2013-14 64 60
2014-15 65 57
2015-16 62 54
2016-17 111 83
Total No. of Students 367 319
Companies: Anglo Eastern, Head Strong, Isgec Heavy Engg. Ltd, Lohiya Pvt. Ltd., Maruti Suzuki Ltd, Tata Power, TCS, Fiat India Ltd., Honda Cars, Tech. Mahindra, ISGEC Yamuna Nagar, LAVA International, Daurala Sugar Works, HCL Tech., Torrent Power Agra, HMSIL, Armacell Pune, MAN Trucks India Indore, SAP Labs India, DCM Sri Ram Group, Genpact/Headstrong Noida, Maruti Manesar, Timex, TVS Chennai, Raghunandan Money Agra, NLMK Mumbai, AtulGroup of Industries Agra, Jamuna Auto Jamshedpur, Zia Electronics Bangalore, DSCL Kota, LG Electronics, Crompton Greaves
THRUST AREAS
Computer Aided Design and OptimizationProduction Processes and ManufacturingEnergy Management and Renewable Energy, Industrial Engineering, Ergonomics, Fuzzy Systems and Biomechanics, Intelligent & Agile Manufacturing SystemsSoft Computing and quantum computing,Additive Manufacturing
3. Research, Consultancy and ExtensionResource Mobilization
Annual Budget of Department : Rs. 1.5 lakhs
Funds generated from Extra-Mural Projects:▪ Projects Completed : Rs. 9 crores▪ Projects In Progress : Rs. 3.55 crores
Funding Agencies : ADRDE, DRDO, DST, UGC-SAP, MHRD, PCRA, AICTE, CSIR.
Major Funding
▪ DST-FIST : 456.24 lakhs (1996 - 2017)
▪ UGC-SAP : 80.46 Lakhs (2009 - 2017)
▪ MHRD-NMEICT Mission Programme : 6.18 Crores
Research Impact
h-Index (Faculty): 2 – 10
i-10 Index (Faculty): 1 – 10
Impact Factor: 0.33 – 3.78
Total Citations: 780
Research Publications in last 5 years▪ Journals : 46▪ Intl./Natl. Conf. Proc. : 52▪ Books/Book Chapters : .2
Journals Impact Factor
Journal of Material Science and Mechanical Engineering 3.78International Journal of Hydrogen Energy 3.58Applied Soft Computing 3.541Journal of Engineering, Science and Management Education 3.22
International Journal of Advanced Technology in Engineering and Science (IJATES) 2.87
International Journal of Engineering Research & Technology 2.85Applied Thermal Engineering 2.73The International Journal of Engineering and Science 2.72JCSE-International Journal of Computer Sciences and EngineeringJCSE 2.63International Journal of Structural and Multidisciplinary Optimization (2016), Springer 2.2
GE- International Journal of Engineering Research, (IJER) 1.63
A Journal of Prevention, Assessment & Rehabilitation 0.779
Iranian Journal of Fuzzy Systems 0.534
International Journal of Computational Intelligence Systems 0.391
3. Research, Consultancy and Extension
Research Output
▪ Ph.D Awarded : 8
▪ Ph.D Submitted : 5
▪ Ph.D Enrolled : 15
▪ Patents : 1
Organization of Scientific Events
International Conferences /Workshops : 6
National Conferences/Workshops/Seminars : 15
Seminars from Distinguished Visiting Scientists : 6
National Seminar on Ergonomics, Biomechanics & Occupational
Health, March 2013
National Workshop on Biofuels: Prospects and Challenges
December 2012
3. Research, Consultancy and Extension
Faculty Awards and Recognitions
▪ International : 2
▪ National : 14
▪ Best Paper Awards : 11
▪ Visiting Professorship : 1
▪ Visiting Scientists : 1
▪ Invited Talks : 5
• Abroad : 4
• In India : 1
Details of Awards and Recognitions By Faculty Members
Prof. K. Hans Raj
Best Paper Award for a Journal paper, A Quantum Inspired Evolutionary Computational
Technique with Applications to Structural Engineering Design, JCSE- International Journal of
Computer Sciences and Engineering, Vol. 5, Issue 5, pp. 20-33, 2017.
Chaired three Technical Sessions and delivered one Key note address and One Invited
Talk at the International Conference on Numerical Modelling of Industrial Forming Processes
(NUMIFORM 2016) at University of Troyes, France 4th-7th July 2016.
Invited Talk and Research Interaction at at Centre for Material Forming (CEMEF), Sophia
Antipolis, France on Agile Manufacturing, July 2016. He, during his talks on Finite Element
Simulation of Selected Severe Plastic Deformation Processes mentioned the Objectives of
Education at DEI, Vision-2031 and Consciousness Studies being carried out at DEI. He also
visited various laboratories at University of Technology Troyes and had research interaction
with Prof. Pascal Lafon, Head of Mechanical Engineering Department.
Dr. K. Hans Raj Chaired three technical sessions, presented an invited talk and a Key note
address at International Conference on Numerical Modelling of Industrial Forming Processes
(NUMIFORM-2016) at University of Technology, Troyes, France from 4th to 7th July.
Leader of Technology and Innovation Award, at International Conference on Advanced
and Agile Manufacturing Systems (ICAM 2015) at KNIT, Sultanpur, India on 28th December
2015.
Lifetime Achievement Award, by ISAM at University of Oakland, MI, USA during Intl.
Conference on Agile and Advanced Manufacturing Systems(ICAM-2014), 28May 2014.
•Best Paper award and Best Service Award by University of Oakland, MI, USA during International Conference on Agile and Advanced Manufacturing Systems (ICAM-2014), 28th May 2014.
•Best Paper Award by IIT-BHU for paper entitled "Plastic deformation of Al6061 during equal channel angular pressing: A case study" during International conference on Agile Manufacturing (ICAM-2012), Dec. 16-19 2012.
•Elected as Secretary, ISPE-USA, at University of Oakland, MI, USA, 30th May 2014.•Elected as Fellow of Aeronautical Society of India (FAeSI) on 21st July 2012.•Nominated as President, International Society of Agile Manufacturing, USA, Dec. 2012.•DST R&D Project of undersigned entitled “Modeling and Experimental Study of Severe Plastic Deformation using Equal Channel Angular Pressing (ECAP)”, was rated to be “Very Good” by Program Advisory Committee (PAC), 30th October 2012.•Honoured as Co-Chair of International Conference on Agile Manufacturing (ICAM-2012) at IIT-BHU from 16th to 20th December 2012.•Nominated as Associate Chief Editor, International Journal of Advanced Manufacturing Systems (IJAMS), 2012.•Nominated as Member Executive Board DRDO of Project AKAASHDEEP, Delhi, 7th Jan.2012.•Nominated as Expert for Review of High Speed Sled and Para System for SAE 500Kg Class, ADRDE (DRDO),3rd January 2012.•Nominated as Member Board on DRDO Laboratory Award and DRDO Cash Award Meeting, ADRDE(DRDO), 18th January 2012.•Nominated as Expert from DEI for Preliminary Design Review of Mechanical Subsystems of Project NAKSHATRA, DRDO, 11th February 2012, New Delhi.
•Honoured as Chief Guest, Valedictory Function of National Conference on Recent Developments in Production and Thermal Engineering, 18th February 2012, MPCT, Gwalior.
Faculty Honours
Dr. R. Singh receiving ISTE AwardDr. K. Hans Raj receiving Life Time Achievement Award at IIT BHU.
Prof. K. Hans Raj, Dayalbagh Educational Institute acted as Chief Guest for Valedictory function of RAME-2012 on 9th June 2012 at SGI Mathura.
Prof. K. Hans Raj, Dayalbagh Educational Institute being facilitated as Chief Guest of National Conference on “Recent Developments in Production and thermal Engineering” (NCRDPTE-2011) at Maharana Pratap College of Technology, Gwalior.
•Prof. S. K. Srivastav•Instituttion of Engineers Medal 2001.•Dr. Rahul Swarup Sharma•Awarded BOYSCAST Fellowship by Govt. of India for pursuing research at Rensselaer Polytechnic Institute, Troy, New York, USA during year 2009.•Best paper award at National Systems Conference organized at IIT-Roorkee in December 2008.•Best paper award at National Systems Conference, NIT-Surathkal, December 2010.•The Institution Medal by The Institution of Engineers (India) for the year 2001•Institution of Engineers “Certificate of Merit” for the research paper Mr. Kumar Ratnakar•Best Paper Award for paper in ICAM 2011 held at DEI.•Dr Aditya•Lead Guest Editor for the Special Issue of Advances in Mechanical Engineering (Impact Factor 0.827) on “Advanced Modelling and Dynamic Analysis of Rotating Systems”.•Lead Track Chair in the Track on Diagnostics and Prognostics of Mechanical Systems in 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS - 2018), Jointly Organized by PDPM -Indian Institute of Information Technology, Design and Manufacturing Jabalpur and Society for Reliability and Safety (SRESA), Mumbai.•Member of American Society of Mechanical Engineers (ASME), Annual (Since 2012)•Institutional fellowship to visit USA to attend ASME Conference in August 2014.•SERB (DST) fellowship to visit Italy to attend IFTOMM Conference in September 2014.•Mr. Manoj Dixit•Best paper award at International Conference on Clean and Green Energy (ICCGE) 2016, Rome, Italy.•Mr. Atul Suri•Director’s medal in M.Tech., Director’s medal for scoring highest marks in Comparative Study of Religion 99•Best paper award at International Conference on Agile Manufacturing (ICAM-2011) at DEI.•Best paper award at International Conference on Agile Manufacturing (ICAM-2012) at IIT BHU.•Best participant award for refresher course JNVU, Jodhpur 2016.
3. Research, Consultancy and Extension
Recognitions
Fellows, Professional Bodies : 5
Members of Editorial Boards of Journals : 6
Members of Review Boards of Journals : 6
Consultancy (Industrial or other)
Organizations Funds Generated (in Lakhs)
ADRDE, DRDO 49.83
PROFESSIONAL CONSULTANCY SERVICES OFFERED
Consultancy to Engineering Institutions: Faculty of Engineering and Technology Agra College, Agra (2004)
Hindustan College of Science and Technology, Farah, Mathura (1996)
Consultancy to Industries: Replacement of Centrifugal Pump
M/s. Brajesh & Brothers Udyog, Industrial Area, Agra (Fabrication of
Forging Die for Synchronizer Rings for Synchromesh Gear Box of Maruti
Car)
M/s. Garg Engineering, Agra (Verification of Orifice hole diameter of
Orifice plate no. 8283)
M/s. Britannia Engineering Company, Foundry Nagar, Agra (Fabrication of
Broaching Die for Synchronizer Rings, Fiat & Maruti Car)
Aero-space Flexible structures, Civil Structures etc.
Many of these projects immensely contribute to uplift of local industries and Government organizations including Defense.
Department Publications
3.7 Collaborations
Research Collaborations
International National
• CEMEF, France
• University of Kiel, Germany
• Oakland University, Michigan, USA
• MIT, Boston, USA
• University of Maryland, USA
• Michigan University, USA
• Western Michigan University, USA
• IIT, Delhi
Signing of MOU with
School of Engineering, University of Michigan
4. Infrastructure and Learning Resources
4.1 New Facilities/Labs./Major Equipment Added
• Industrial kinesiology Lab extension
• Incubation Centre• Additive Manufacturing
Infrastructure and Learning Resources Contd.
IT Infrastructure• WiFi Facility• Video Conferencing Facility : One Room
Library as a Learning Resource• UGC INFLIBNET e-journals• Departmental Libraries : No. of Books : 1000
Additive Manufacturing (3D Printing) facility
Stratasys Fortus 400mc 3D Printer System; Objet 30 Pro Desktop 3D Printer; Mojo 3D Printer Desktop 3D Printer; Makerbot Replicator 2 Desktop 3D PrinterSteinbichler COMET L3D 2M professional 3D scanner System
Juggad Innovation of 3D Printing @ DEIAcross multiple levels
3D Printers Developed by Students in Lab @DEI
OUTREACH Conversion of an Old Bus was into a Fire Brigade-cum-Water
Tanker
Improved Photo Therapy Unit for treatment of Jaundice in
Infants
Cutting Machine used in Press and Publications
Low Cost Seat on Bicycles for small children
Conversion of Low Height Desks into seating benches and
study desks for Day Boarding School
Pedal-driven Fodder Cutting Machine – A Remedy for Arthritis
Gear Profile Testing Apparatus
Hand Rotary Tool for Spherical Turning on Lathe Machine
33-kV Sub-station Panel Assembly, etc.
OUT REACH PROGRAM OF SOCIAL SERVICE AT VILLAGE PADAHAN- HIMACHAL BY STAFF OF MECHAICAL ENGINEERING
DEPARTMENT
INNOVATIONS AND COMMUNITY SERVICES
Driver Cabin of Fire Brigade-cum-Water Tanker
PHTO THERAPY MACHINE PEDAL-DRIVEN FODDER CUTTING MACHINE
Fire Brigade-cum-Water Tanker Fire Brigade-cum-Water Tanker
Teak wood for Conference Table Conference Table Conference Table Conference Table
REFURBISHING OF OLD BUS AND TRUCK FOR COMMUNITY SERVICE
INCUBATION CENTRE & CENTRE FOR NON-TRADITIONAL MACHINING
Prof. Jannes Slomp Prof. Jannes Slomp Prof. Jannes SlompProf. Jannes Slomp Prof. Jannes Slomp
FEW SNAPS OF VISITS BY EMINENT PERSONS
Mitsubishi Team on 17.03.2015
Prof. Jannes Slomp on 06.01.2015
Padamshree Dr. D.K. Hazra on 30.1.2014
Bharat Ratna Dr. A.P.J. Abdul Kalam in 1993 & 2011
Nobel Laureate Prof. Richard R. Ernst in 2005
Dr. D.K. Hazra Dr. D.K. Hazra Dr. D.K. Hazra Dr. A.P.J. Abdul Kalam Dr. A.P.J. Abdul Kalam
Work Experience Courses (WEC) for 2nd Year Students to get hands on skill of different areas of their interest.
➢ IC Engines, R & AC, Metrology etc..
➢ Maintenance and repair of buildings and construction sites
➢ Photography
➢ Repair of Electrical Equipment's
Six months Co-op training of students after completion of 3rd year, in various reputed organizations/Industries to get exposure to the latest work culture of industries and handling projects related to productions and industrial R & D.
➢ TATA MOTORS, TATA HITACHI, TATA COMMINS, TCS, ISWP
➢ FIAT, MARUTI, HONDA, NEW HOLLAND, YAMAHA, TVS MOTORS.
➢ SRF, L&T, L&T Boilers
Core Courses for evolving a complete man.
➢ GKC, CRC, CEC, GAMES, AGOP, Social Service, CCA and Industrial Psychology.
BEST PRACTICES MECHANICAL ENGINEERING DEPARTMENT
5. Future Plan of Action
Departmental Vision – 2031Important Milestones to be achieved• To make the department one of the top 10 departments of
India.• 100% students to appear in GATE Examination• Maintaining percentile 99.9 in GATE as was done for last 31
years.• Aim towards 100% placements.• To create the following Centers of excellence:
• Agile Manufacturing• Non-conventional Energy• Innovation, Incubation and Entrepreneurship
• Excellence in Research and Development • 10 Significant Start- ups in Engineering.