Dentin bonding agents
-
Upload
kritika-sarkar -
Category
Healthcare
-
view
103 -
download
3
Transcript of Dentin bonding agents
![Page 1: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/1.jpg)
BY:
Kritika Sarkar
![Page 2: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/2.jpg)
American society for testing and materials specification D 907.
Buonocore reported in 1955 that acid, could be used to alter the surface of enamel to ’ render it more receptive to adhesion."1 He had discovered that acrylic resin could be bonded to human enamel after conditioning with 85% phosphoric acid.
Buonocore accurately predicted several potential uses for this new technique, including Class III and Class V restorations and pit and fissure sealants.
Bonding sytem for restorative materials by Edward J Swift DMD, MS
![Page 3: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/3.jpg)
Dentin bonding agent
A thin layer of resin between conditioned dentin
& the resin matrix of composite.
Dentin bonding:
The process of bonding a resin to conditioned
dentin.
Phillip’s science of dental materials (11th edition)
![Page 4: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/4.jpg)
The word adhesion comes from the latin
“adhaerere” (to stick to).
It is defined as the state in which 2 surfaces
are held together by interfacial forces which
may consist of valence/ interlocking forces
or both.
Sturdevant’s art and science of operative dentistry (5th edition)
![Page 5: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/5.jpg)
![Page 6: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/6.jpg)
Chemical bonding between the adhesive
and the adherent
Adhesive
Adherend
![Page 7: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/7.jpg)
![Page 8: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/8.jpg)
Van der waal’s interactions-attraction between
opposite charges on ions and dipoles
![Page 9: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/9.jpg)
Dispersion forces- interaction of induced
dipoles
![Page 10: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/10.jpg)
Hydrogen bonds-it is particularly strong bond
and can be included among physical forces
![Page 11: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/11.jpg)
COVALENT BOND
It involves sharing
electron between 2 atoms
or molecules.
IONIC BOND
It involves an actual
transfer of electron form
one atom to another.
![Page 12: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/12.jpg)
Interlocking of the
adhesive with
irregularities in the
surface of the substrate
or adherend.
This would involve the
penetration of resin &
formation of resin tags
with the tooth surface.
![Page 13: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/13.jpg)
Interlocking between mobile molecules such as the adhesion of two polymers through diffusion of polymer chain ends across an interface.
This would involve the precipitation of substances on the tooth surfaces to which resin monomers can bond mechanically or chemically.
![Page 14: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/14.jpg)
An electrical double layer at the interface of a
metal with a polymer that is a part of total
bonding mechanism.
![Page 15: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/15.jpg)
![Page 16: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/16.jpg)
Energy of a solid on the surface is higher than
its interior because:
Core atoms are surrounded by atoms on all sides
Equal interatomic distances
Minimal energy
![Page 17: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/17.jpg)
•But the surface atoms are unequally distributed and hence have more energy.•So the surface atoms get attracted towards the core resulting in surface tension.•Due to this substances on the surfaces get attracted to the substrate.•Harder the surface, higher the surface energy & higher the adhesive properties.
![Page 18: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/18.jpg)
When a film of water in
introduced between two
glass slides the
adhesion properties are
better illustrated . This
is called wetting.
Surface energy and
cleanliness of the
adherend influences the
wetting.
![Page 19: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/19.jpg)
It is the measure of wettability & is the angle
formed by the adhesive with the adherend at
the interface.
Smaller the contact angle greater the
wettability.
![Page 20: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/20.jpg)
Low viscosity of the adhesive is required to
allow its easy flow on the surface of the
adherent. This increases the strength of
adhesion
![Page 21: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/21.jpg)
This prevents the liquid adhesive from
completely wetting the adherent due to the
presence of air pockets. This decreases the
strength of adhesion.
![Page 22: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/22.jpg)
Any debris on the surface will prevent direct
contact between the adhesive and the
adherend. This decreases the strength of
adhesive.
![Page 23: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/23.jpg)
The thinner the adhesive film, the lesser the
air voids and the stronger the strength of
adhesion.
![Page 24: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/24.jpg)
Liquid adhesive undergo contraction during
setting (polymerization shrinkage). This
contraction results in the reaction of stresses at
the interface that severely decreases the
strength of adhesion.
![Page 25: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/25.jpg)
No doubt that primary bonds between
adhesive and adherent produce stronger
adhesion than if secondary bonds are formed.
![Page 26: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/26.jpg)
The mineral content increases in different situations, which include:Aged dentin
Dentin beneath carious lesion
Exposed dentin
In all the above mentioned situation the dentinal tubules become obliterated with tricalciumphosphate crystals.
There are compositional changes in sclerotic dentin, which is much more resistant to acid etching than normal dentin.
Consequently, the penetration of a dentin adhesive is limited.
Sclerotic dentin
![Page 27: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/27.jpg)
![Page 28: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/28.jpg)
Composite resins do not show an intimate microscopic contact with dentin when placed directly into the cavity.
In order to overcome this, an intervening layer of fluid is used, which fills in the microscopic space, polymerizes & combines with the composite resin & components of dentin.
The adhesive molecule is bifunctional & a part of which (X) enters into chemical union with the tooth structure, & the other part (M) copolymerizes to the resin through the double the double bond of methacrylate.
![Page 29: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/29.jpg)
CH3
CH
2
C
C
O
O R X
Methacrylate group
Spacer
Reactive group capable
of bonding to dentin
•The spacer group (R) is responsible for making the
molecules large enough to keep the methacrylate groups
spatially located for optimal chemical reaction with
composite
![Page 30: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/30.jpg)
Ideally dentin adhesives should be both hydrophilic & hydrophobic.
It has be hydrophilic so as to be able to displace dentinal fluids & thereby wet the surface, permitting penetration into porosities with the dentin & eventually react with organic or inorganic components.
Hydrophobic properties are needed to allow bonding to the composite resin matrix of which is hydrophobic.
![Page 31: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/31.jpg)
It occurs through ionic interaction between Ca2+ ions on the surface of dentin & negative charges on the group X of the adhesive.
Group X can be:▪ Phosphates
▪ Amino acids
▪ Amino alcohols
▪ Dicarboxylates
![Page 32: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/32.jpg)
This involves interaction with the following
components present in the collagen of dentin: Amino (-NH)
Amido (-CONH)
Hydroxyl (-OH)
Carboxylate (-COOH)
Removal of hydrogen from any of these
groups allows combination with chemicals
present in the dentin bonding agent.
![Page 33: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/33.jpg)
Compounds that are capable of reacting with one or more groups of collagen are:
isocynates
carboxylic acid chlorides
carboxylic acid anhydrides
aldehydes.
Egs: Dentin Adhesit(isocynate based), Gluma (aldehydebased)
![Page 34: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/34.jpg)
Bonding to enamel is relatively simple process, without
major technical requirements/difficulties.
Bonding to dentin presents a much greater challenge.
Several factors account for this difference between
enamel and dentin.
Although enamel is highly mineralized tissue composed
of more than 90% (by volume) hydroxyappetite, dentin
contains substantial proportion of water and organic
material, primarily type 1 collagen.
![Page 35: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/35.jpg)
Dentin also contains a dense network of tubules that connect the pulp with the dentinoenamel junction (DEJ).
A cuff of hypermineralizeddentin called peritubulardentin lines the tubules.
The less mineralized intertubuler dentin contains collagen fibrils with the characteristic collagen banding.
Dentin is intrinsically a hydrated tissue.
![Page 36: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/36.jpg)
Adhesion can be affected by the “remaining dentin thickness” after tooth preparation.
Bond strengths are generally less in deep dentin than in superficial dentin.
Whenever tooth structure is prepared with a bur or an instrument, residual organic & inorganic components form a “smear-layer” of debris on the surface.
The smear layer fills the orifices of the dentinal tubules, forming “smear-plugs”
![Page 37: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/37.jpg)
Based on :
Generation
Mode of application
Number of steps
Etching pattern
![Page 38: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/38.jpg)
![Page 39: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/39.jpg)
These products ignored the smear layer. They included NPG-GMA (N-phenylglycine glycidyl
methacrylate), the polyurethanes, and cyanoacrylates. An example of an NPG-GMA bonding agent was S.S.
White's Cervident which became available in 1965. The bond strength of this first-generation dentin
bonding agent was on the order of 2 to 3 MPa. 6 Clinical trials of these products were largely
disappointing; 7th one 6-month study reported a failure rate of 50%.
Additional problems with them included loss in bond strength over time and a lack of stability of individual components during storage.
![Page 40: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/40.jpg)
These systems leave the smear layer largely, if not wholly, intact when used.
Although second generation bonding agents produced variable results, they generally performed better than first-generation bonding agents.
They routinely produced bond strengths that ranged from
approximately 4.5 to 6 MPa10,11 and exhibited clinical failure
rates of 30% at one year. Many of these products were developed and
marketed in the late 1970s and early 1980s.
![Page 41: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/41.jpg)
There were three types of second-generation
products:
1. Etched tubule dentin bonding agents
2. Phosphate ester dentin bonding agents
3. Polyurethane dentin bonding agents
![Page 42: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/42.jpg)
These attempted to achieve retention to dentin
by etching the tubules with 25% citric acid
and employing ethylmethacrylate to
mechanically interlock with the etched tubules
representative brand: Dentin Bonding System
(Den-Mat)
![Page 43: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/43.jpg)
▪ These used analogs of BIS-GMA with attached phosphate esters the
phosphate group of the dentin bonding agent apparently bonded with
calcium in the tooth structure and the methacrylate end of the molecule
bonded to the composite resin.
Most systems of this type employed a mild cleanser to modify the smear
layer bond strengths were approximately 10% to 30% as strong as etched
enamel to resin bonds representative brands: Bondlite (SDS/Kerr),
Creation Bond (Den-Mat), Prisma Universal Bond (Caulk), and
Scotchbond(3M)
![Page 44: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/44.jpg)
These were based on the isocyanate group of the polyurethane polymer that bonds to various groups in dentin including carboxyl, amino, and hydroxy groups.
Most used diisocyanates which simultaneously bonded to both the dentin and composite resin.
The polyurethane's setting reaction was unaffected by the presence of fluid in the dentin tubules or smear layer.
Most of these systems left the smear layer intact, however some employed hydrogen peroxide for cleansing.
Representative brand: Dentin-Adhesit (Ivoclar Vivadent)
![Page 45: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/45.jpg)
These systems alter or remove the smear layer prior to bonding and produce bond strengths ranging from 16 to 26 Mpa.
Some of the products produce bond strengths approaching those formed to enamel. Clinical retention rates of 100% at 2 years have been reported.
Most products use a three-component system consisting of a:
1. Conditioner
2. Primer
3. Adhesive.
![Page 46: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/46.jpg)
It is usually a weak organic acid (e.g., maleicacid), a low concentration of a stronger inorganic acid (e.g., phosphoric or nitric acid), or a chelating agent (e.g., EDTA).
Main Actions:▪ Heavily alters or removes the smear layer
▪ Demineralizes peritubular and intertubular surface dentin and, thereby, exposes collagen fibrils
▪ Demineralizes up to a depth of 7.5 microns (depth of demineralization depends on type of acid, its concentration, and etching time). More mineralized peritubular dentin is etched more deeply than the intertubular dentin
▪ Increases dentin permeability by 4 to 9 times.
![Page 47: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/47.jpg)
It is usually a bifunctional monomer in a volatile solvent such as acetone or alcohol.
A bifunctional monomer is one that has a hydrophilic end (i.e., one with an affinity for water) and a hydrophobic end (one lacking an affinity for water).
Examples of bifunctional monomers include HEMA (hydroxyethyl methacrylate), NMSA (N-methacryloyl-5-aminosalicylic acid), NPG (N-phenylglycine), PMDM (pyromelliticdiethylmethacrylate), and 4-META (4-methacryloxyethyl trimellitate anhydride).
![Page 48: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/48.jpg)
Main Actions:▪ Links the hydrophilic dentin to the hydrophobic adhesive
resin; is able to do this because of its bifunctional nature
(i.e., primer's hydrophilic end bonds to the wet dentin and
its hydrophobic end bonds to the adhesive resin).
▪ Promotes infiltration of demineralized peritubular and
intertubular dentin by its own monomers and those of the
adhesive resin.
▪ Increases wettability of the conditioned dentin surface
and increases contact between the dentin and resin.
![Page 49: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/49.jpg)
It is an unfilled or partially-filled resin; may
contain some component of the primer (e.g.,
HEMA) in an attempt to promote increased bond
strength.
Main Actions:▪ Combines with the primer s monomers to form a resin-reinforced
hybrid layer ( resin-dentin interdiffusion zone ) from 1 to 5 microns
thick.
▪ Forms resin tags to seal the dentin tubules.
▪ Provides methacrylate groups to bond with the subsequently placed
resin composite.
![Page 50: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/50.jpg)
The next generation of dentin bonding systems appeared in the early 1990s and is still widely used.
Most of these systems are based on the "total-etch" technique, or simultaneous etching of enamel and dentin, typically with phosphoric acid. Improvement in dentin bond strengths by etching was first demonstrated by Fusayamain 1979 but the concept of total-etching only recently gained acceptance in the United States.
Etching of dentin traditionally was discouraged because data from early studies seemed to indicate that phos-
![Page 51: Dentin bonding agents](https://reader033.fdocuments.in/reader033/viewer/2022042716/55a741cd1a28ab7b018b4783/html5/thumbnails/51.jpg)