DENTAL PRODUCTS · Inlays, ceramic or composite veneers, Maryland bridges ADVANTAGES MULTI-PURPOSE...

BONDINGS

COMPOSITES

CEMENTS

RESINS

IMPRESSIONS

EQUIPMENTS

D E N T A LP R O D U C T S

INNOVATION, PERFORMANCE... ... AND MORE BIOCOMPATIBILITY!

JAN 2020

Sources : • Genotoxicity and cytoxicity of 2-hydroxyethyl methacrylate - Elzbieta pawlowska et ol - Mutation Research 696 (2010) 122-129 • Cytoxicity of the dental composite component TEGDMA and selected metabolic by-products in human pulmonary cells - J Emler et ol• TEGDMA and Bisphenol-A : the same level of risk in dental medicine ? - Jean-Marc Meyer - Autredent, No 56, pages 81-86, 2010

INNOVATION, PERFORMANCE & CLINICAL FEATURES

B I O C O M P A T I B I L I T Y Formulation without addition ofBisGMA, TEGDMA, HEMA

By placing biocompatibility at the heart of its innovation strategy, the French laboratory ELSODENT stands out with new dental materials that are always more efficient and safer for patients.

With a 25-years clinical experience, ELSODENT designs and manufactures, in France, improved biocompatibility dental products. More health-friendly for patients, the product range also present unique clinical and physico-chemical qualities to meet the requirements of dentists in terms of saving time and economy.

The origin of BIO+ ELSODENT range

Alarmed by the potential toxicity of dental products commonly used and sold on the market, the French laboratory ELSODENT wanted to address the major concerns of dentists but also those growing health-conscious patients, by developping more health-friendly dental products.

Scientific background of the BIO+ range

These questions about dental products go back decades. During the 90s, amalgams, more commonly known as «fillings», containing mercury, were already challenged by a part of the scientific community.

Replaced today by composites, these new materials are now getting contested because of their significant potential toxicity. With formula based on compounds like TEGDMA, HEMA & BisGMA, these dental products can, under specific conditions, release in the mouth toxic substances for our organism and carcinogenic, like Formaldehyde and Bisphenol A.

FOLLOW US!

Innovation & Performance, and more Biocompatibility!

Dental revolution

Based on its advanced clinical, technical and scientific skills, our laboratory has developed a complete range of composites, resins, adhesives agents, cements,... formulated without addition of these potentially dangerous monomers such as TEGDMA, HEMA, or BisGMA and its derivatives.

Our formulations now offer non-hydrolysable substitution monomers issued from our R&D programs.

Innovative and performant, the BIO + range is ideally suited to the needs of both dentists and patients, since these products benefit from improved biocompatibility while maintaining exceptional clinical and physicochemical properties.

They are easily identified by the BIO+ logo and are presented in recyclable and / or recycled packaging.

Monomers currently used in dentistry and risks*BisGMA (Bis Phenol Glycidyl Metacrylate)

Basic resin for composites and others dental products, synthetized from Bisphenol A (BPA) and Glycidyl Methacrylate.Also contains free BPA, quickly released by the products in the mouth, and found in saliva a few hours after use. When hydrolyzed, the product releases Bisphenol A.

TEGDMA (Triethyleneglycoldimethacrylate)

Resin used to make BisGMA more flowable. Beyond its intrinsic toxicity, its lipophilic nature allows it to easily penetrate cell membranes and interact with DNA. Easily hydrolysed by salivary enzymes to produce Formaldehyde.

HEMA (Hydroxy Ethyl Metacrylate)

A short-chain of resin, which easily crosses cell walls and can,like TEGDMA, interact with DNA. Interfering in DNA repair, this can lead to mutations and cancers. Easily hydrolysed by salivary enzymes to produce Formaldehyde.

*Sources : Mol Biol Rep (2012) 39:1561–1574 | Dental Materials Journal 19 (2) 139-152, 2000 | Mutation Research 696 (2010) 122–129 | Dental Materials 24 ( 2008) 1670–1675

Innovative and performant dental products, made in France and formulated without the addition of potentially toxic resins such as HEMA, BisGMA, TEGDMA.

This is the core of ELSODENT BIO+ approach when designing dental consumables with improved biocompatibility to offer more health-friendly products.

Vizualized by dentists, designed by ELSODENT

ISO 13485

CONTENT

RESTORATION 5CORE BUILD-UP 13IMPRESSION 18CROWNS 23CEMENT 27IMPLANTOLOGY 32ENDODONTICS 34ACCESSORIES 36EQUIPMENT 39

Dental medical devices for dental professionnals only, not refunded by the Health Insurance. Carefully read the intructions on the product packaging andnotices before use. Our products are manufactured by G-Pharma certified by Tüv Rheinland according to the ISO 13485 standard.

5

RESTORATION

SEALANTPF SEAL Pits and fissures sealant

COMPOSITEPUREFILL 2Nano-hybrid, antero-posterior compositePUREFILL FLOWFlowable nano-hybrid compositeCIRUS +Nano-hybrid, antero-posterior compositeCIRUS FLOWFlowable nano-hybrid composite

OPAQUEROPAQOpaquer

BONDING HEALBOND MPUniversal self-etching light-cure bonding agentHEALBOND MAXTwo-components universal light-cure adhesive systemHEALBONDLight-cure bonding agent

ETCHINGG-ETCHEtching gel 38% phosphoric acid

6 www.elsodent.com

PF SEAL

PUREFILL FLOW

REFERENCES & DESCRIPTION

PUR-F-4-* 2 x 1,2 ml (2g) syringes + 10 tips.VITA shades:A1/B1 - A2 - A3 - A3,5 - B2

IR-100 100 pink needle tips. Gauge 18.*Shade MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1

ADVANTAGESHigh flexural strength. Elongation at break > 5 mm

Very fluid. Reach the bottom of the thinnest fissures

Conversion rate > 60%

Hydrophobic High durability. No risk of detachment

Easy and fast use: etching, application then polymerization

Very resistant, less abrasion

Opaque white shade. Better contrast for a perfect surveillance application and a good survey.

INDICATIONSPits and fissures sealing

REFERENCES & DESCRIPTION

PFS-3,6 2 x 1,2 ml syringes + 10 tips. Opaque white shade

ETL 100 blue needle tips. Gauge 25MD : Class IIa certified by Tüv Rheinland (0197)

Pits and fissures sealantFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESVery resistant. Flexural strength > 100MPa

Conversion rate > 60%

Highly filled (65% weight)

Thixotropic. Remains in place without flowing

Time saving. No metallic matrix needed

Stable. Does not polymerize under the chair light

INDICATIONSRestoration of small classes III and classes V

Cavity liner in the ‘’Bond and Flow’’ technique

Fix splints after orthodontic treatments or in case of mobile teeth

Flowable nano-hybrid compositeFormulation without addition of HEMA, TEGDMA, BisGMA

1. Lingual clinical view of 31 and 41 treated

2. Etching of the coronary cavities 31 and 41

3. Setting up of a light-cure bonding

4. Application of Purefill Flow in the coronary cavities 31 and 41

5. Light-curing of Purefill Flow with the brace

6. Brace in place, flooded in the polymerized composite

CLINICAL PROCEDURE | Fixing brace

7www.elsodent.com

PUREFILL 2

PUREFILL2 Filtek Tetric Clearfil G-Aenial ElsodEnt Supreme Evoceram Majesty GC 3M ViVadEnt Kuraray

PUREFILL 2 Filtek Tetric Clearfil G-Aenial Grandio Z100 Supreme Evoceram Majesty GC Voco 3M 3M ViVadEnt Kuraray

20s 30mn 24h 48h

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

INDICATIONSPosterior restorations (class I, class II, MOD)

Anterior restorations (class III and class IV)

Class V cavities

Aesthetic corrections (diastema, hypoplasia, discoloration)

Nano-hybrid, antero-posterior compositeFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESLow shrinkage ~ 2 %Polymerization depth > 3mmHigh conversion rate ~ 70%Highly filled (80% weight)

Does not stick to instruments

Perfect consistency for easier use, anterior and posterior

Stable, does not polymerize under the chair light

Aesthetic. Excellent polishability

This is the first Elsodent composite developed from an innovative formulation without any addition of BisGMA, TEGDMA, HEMA, to get a low toxicity composite. Its higher biocompatibility, due to the non-hydrolysable monomers contained in the matrix of the product, leads to lower toxicity over time. It makes PureFill2 an essential product in our declaredapproach to public health.

REFERENCES & PRESENTATIONSPUR2-3-* 3g syringe. VITA shades

A1/B1 – A2 – A3 – A3,5 – B2 - C2 - Incisal - Bleach

PUR2-5* 20 x 0,25g compules. VITA shades A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal - Bleach

* Shade MD : Class IIa certified by Tüv Rheinland (0197)

COMPARATIVE PHYSICO-CHEMICAL TEST

* Tests conducted by G-Pharma. Volumetric shrinkage according ISO 17304. Flexural strength according to ISO 4049 - Zwick equipement. Conversion rate evaluated using a FTIR spectrometer with ATR mode. Polymerization by Elsodent curing light diam: 9mm - 600mW/cm² power at room temperature (20°C).

Conversion rate (%)*Flexural Strength (MPa)*

8 www.elsodent.com

CIRUS+

INDICATIONSAnterior restorations (class III and class IV)

Posterior restorations (class I, II and MOD)

Class V cavities

Aesthetic correction (diastema, hypoplasia, discoloration)

Composite veneers (direct method

Nano-hybrid, antero-posterior composite

ADVANTAGESEconomic syringe 4,5gDoes not stick to instruments

Outstanding flexural strenght = 130 MPa

Polymerization depth > 3mmReduced polymerization stress

Low shrinkage


Easy condensable in posterior use

Easy handling in anterior use

REFERENCE & PRESENTATIONCIRN-4,5* Syringe 4,5g. VITA shades

A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal - Bleach * Shade MD : Class IIa certified by Tüv Rheinland (0197).

CLINICAL PROCEDURE

1- Defective amalgam of 46

2- Minimum removal and cut, preserving the reaction dentin

3- Finished and polished composite

REFERENCES & PRESENTATIONSCIRN-K KIT INTRO 5 x 4,5g CIRUS+ (A1/B1- A2 - A3

- A3.5 - B2) + 1 x 1,2ml CIRUS FLOW (A3) + 1 x 1,2ml OPAQ + 2 x 1,2ml etching gel G-ETCH + 5ml bonding HEALBOND MP + 50 disposable applicators ELSOBRUSH.

MD : Class IIa certified by Tüv Rheinland (0197).

• 5 syringes 4,5g CIRUS+ mixed shades A1 - A2 - A3 - A3,5 - B2

• 1 syringe CIRUS FLOW A3 (1,2ml)• 1 syringe OPAQ (1,2ml)• 2 syringes etching gel G-ETCH (2 x 1,2ml)• 1 bottle light-cure bonding HEALBOND MP (5ml)• 50 disposable applicators ELSOBRUSH

ALL-IN-ONE | KIT INTRO

9www.elsodent.com

CIRUS FLOW

OPAQ

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

INDICATIONSRestoration of small classes III and classes V.

Its perfect thixotropy and its high flexural strength, make Cirus Flow the ideal flowable composite to fix fiber glass splints (mobile teeth, after orthodontic treatments)

Cavity liner in the “Bond & Flow” technique

Flowable nano-hybrid composite

ADVANTAGESThixotropic, does not flow and remains in place

Time saving. No need for a metallic matrix

Very resistant. Flexural strength > 100 MPa


Ideal in conjunction with CIRUS+, for the ‘’Blond & Flow’’

REFERENCES & PRESENTATIONSCIRF-3,6-* 2 x 1,2ml (minimum 2g) syringes available in

VITA shades : A2, A3, A3,5, B2 + 5 tips

CIRF-7,2-* 4 x 1,2ml (minimum 2g) syringes (A2, A3, A3,5, B2) + 20 tips

CIRF-7,2 4 x 1,2ml (minimum 2g) of the same shade + 20 tips. VITA shades : A2 - A3 - A3,5 - B2

IR-100 100 pink needle tips G20* Shade MD : Class IIa certified by Tüv Rheinland (0197)

INDICATIONSTo hide exposed metal surfaces after fracture of the ceramic layer on bridges and crowns.

To cover the reactive dentin in deep class III, to avoid layers of composite

Light-cure opaquerFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESHigh hiding power

Versatile in use

REFERENCES & PRESENTATIONSOPA-2 1 x 1,2ml syringe + 10 applicator tips. A3 shade

LTL 100 black needle tips. Gauge 20MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

10 www.elsodent.com

HEALBOND MPElsodEnt

HEALBOND MP

REFERENCES & PRESENTATIONSBMP-5 Adhesive - 5ml bottle

BMPA-5 Activator for dual-curing use - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)

ALL-IN-ONE!

Shear bond strength* (MPa)


Activator for dual-mode

MULTI-PURPOSE INDICATIONS

HEALBOND MPCASE

ADHESIVE ACTIVATOR

PUREFILL 2(see p. 7)

Light-cure direct restoration Class I to V antero-posterior restorations

CORE D(see p. 14)

Self/Light-cure direct restoration (core build-up)

Core build-up Root-canal post sealing

INNOCEM(see p. 30)

Self/Light-cure indirect restoration

Indirect restorations Inlays, ceramic or composite veneers, Maryland bridges

ADVANTAGESMULTI-PURPOSE Direct & Indirect restorations

UNIVERSAL Powerfull shear bond strength on all support : tooth structures, ceramic, metal and zirconia

High shear bond strength: 13,9 MPaDesensitizing and eliminates residual bacteria

IMPORTANT NOTICE !ELSODENT formulation of INNOCEM allows HEALBOND MP to become DUAL without using an activator!

Universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA

11www.elsodent.com

HEALBOND MAXElsodEnt

OptibondXTRKErr

HEALBOND MAX

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

Adhesives Shear Bond Strenght*

INDICATIONSDIRECT RESTORATION Light-cure, self-cure, dual-cure composites

*In conjunction with INNOCEMINDIRECT RESTORATION Inlays and Onlays ceramic, metal (precious or non-precious), Zirconia, composite.Veneers

ADVANTAGESMULTI-PURPOSE Direct & Indirect* restorations

UNIVERSAL Strong adhesion on all surfaces: dental structures, ceramic, metal and zirconia

Compatible with all resin-cements, composites and core build-up materials, light, self or dual-cure

EFFICIENT Exceptionnal bonding strength when used on dentin and enamel

DURABLE Hydrophobic once polymerized, for a long-lasting action, with no water absorption. Excellent quality of the seal over time.

REFERENCES & PRESENTATIONSBMX-10 HEALBOND MAX Self-etching, Universal

bonding system (2 x 5ml bottles, primer + adhesive)

MD : Class IIa certified by Tüv Rheinland (0197)

NEW

Unique bonding solution, whatever the clinical case and the technique used

CLINICAL PROCEDURE

On the surface of enamel and dentin previously prepared, cleaned and dried and making sure to use a different disposable applicator for each component:

Apply Healbond Max Primer for 20 s. Air dry for 5 s.

Apply Healbond Max Adhesive for 15 sec. Air dry for 5 s.

Light-cure 10 s, then apply the com-posite according to the manufacturer’s instructions.

Dentin with Etching

Dentin Self-Etching

Ceramic mordançée

Metal Zirconia


Two-components universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA

12 www.elsodent.com

Jumbo Kit

G-ETCH

HEALBOND

Syringe 1,2ml

REFERENCES & PRESENTATIONSJKB-50 JUMBO KIT 1 x 50ml storage syringe + 5 x 3ml

empty syringes + 40 tips |B (blue) - V (green)JKV-50

JRB-50 1x 50ml storage syringe (blue)

JRV-50 1x 50ml storage syringe (green)

MET-6 MINI KIT 4 x 1,5g syringes + 10 needle tips (blue)

LTL 100 black needle tips

ETL 100 blue needle tipsDispositif médical de classe IIa certifié par Tüv Rheinland (0197)

Etching gel - Acide phosphorique à 38%

AVANTAGESHigh thixotropy, doesn’t flow

Oustanding water solubility

Excellent contrast. Blue or Green

Washes off quickly and easily

Non-drying, medium viscosity gel. 3-years Lifetime

INDICATIONSLight-cure composites on tooth structures

To desensitise cervical regions and free dentin areas

Dual-cure mode (core build-up), when mixed with Healbond activator

Light-cure bonding agentFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESShear bond strength ~ 13,9 MPa

Desensitizing and eliminates residual bacteria

Good wetting properties to be used on slightly moist dentin surfaces (wet-bonding technique)

REFERENCES & PRESENTATIONSB-5 HEALBOND - 5ml bottle

BA-5 HEALBOND Activator for dual-curing - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)

Activator for dual-cure mode

13

CORE BUILD-UP MATERIALCORE D Dual-cure core build-up material

CORE D FLOWDual-cure core build-up fluid material

CORE D SCSelf-cure core build-up material

CORE D LCLight-cure core build-up material

ANCRAGE RADICULAIREFPRoot canal fiber posts

CORE BUILD-UP

14 www.elsodent.com

CORE D

CORE D FLOW

REFERENCES & PRESENTATIONS

CDB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white shade

CDD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin shade

EJ-100 100 yellow mixing tips

IJ-100 100 yellow intra-oral tips

IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.


CDF-5 2 x 2,5ml syringes + 10 mixing tips + 10 intra-oral tips - dentine

EMP-100 100 brown mixing tip

IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Very thixotropicNo matrix needed !

INDICATIONSCore build-up on non-vital teeth

Sealing root canal posts associated with a dual-curing bonding type HEALBOND MP

Dual-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESVery thixotropic. Does not flow. No matrix needed. Improves operating field vision

Hardness equivalent to dentin. No different feeling while burring

Radio-opaqueHigh flexural strength > 140 MPaHigh compressive strength ~ 330 MPaHigh conversion rate



Dual-cure core build-up fluid material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESFlowable, with thin tips, to allow injection in small and narrow cavities.

Hardness equivalent to dentin. No different feeling while burring

High conversion rate = 68% (1h)

High flexural strength = 136 MPaHigh compressive strength ~ 330 MPa

15www.elsodent.com

CORE D LC

CORE D SC

CORE D LCElsodEnt

Clearfill Photocore Kuraray

CORE D LCElsodEnt

Clearfill Photocore Kuraray

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATE

RIA

LTE

MPO

RARY

BR

IDG

ES &

CRO

WN

SCI

MEN

TS &

CA

VITY

LIN

EREQ

UIP

MEN

TRE

STO

RATI

ON

ACCE

SSO

RIES

NEW



Self-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic. Does not flow. No need for a matrix. Improves operating field vision

Fast setting time = 55s

Self-curing for a minimal shrinkage of the material

High flexural strength = 140 MPaHigh compressive strength ~ 330 MPa

Radio-opaque


Light-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESEasy set up, even in small and narrow cavities

Thixotropic. Set-up without matrix. Time saving and optimized operating field vision

Highly charged (70% weight)

Amazing polymerization depth ~ 6 mm after 40s

High flexural strength ~ 136 MPaHigh compressive strength ~ 360 MPa

REFERENCES & PRESENTATIONSCDLCB-6 2x 3ml syringe + 10 needle tips (white)

CDLCD-6 2x 3ml syringe + 10 needle tips (dentin)

IR-100 100 pink needle tips. Gauge 18.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.


CDSCB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white

CDSCD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin

CDSCB-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - white

CDSCD-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin


IJ-100 100 yellow intra-oral tips

IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

16 www.elsodent.com

FP

6. Gently insert the posts into the root canal. Polymerization starts immediately

7. Apply CORE D SC around the posts and onto the inner surfaces of the preparation

8. Restoration completed, Preparation of the abutment tooth can start

9. Preparation comple-ted. Abutment tooth ready for impression

REFERENCES & PRESENTATIONSKFP–15 KIT INTRO 3 x 5 posts (1,00mm – 1,20mm - 1,35mm),

under individual blister + 3 assorted drills

FP–5-* Refill of 5 posts of the same size, individual blister

FP-3-* Refill of 3 drills of the same size* Size MD : Class IIa certified by Tüv Rheinland (0197)

Core build-up restoration on an upper PM, in conjunction with a FP fiber post

CLINICAL PROCEDURE

1. Endodontic treatment completed, root canals sealed

2. Preparation of the root canal with a suitable reamers, accordingly with the anatomy of the root

3. Preparation completed 4. Choice of the suitable posts - Try-in-application of a conditioner on the posts and cavity (if necessary).

5. Application of HEALBOND MP on the post, canal wall and cavity. Application of CORE D SC on th post.

INDICATIONSTo re-inforce the non-vital tooth structure

Root canal fiber posts

ADVANTAGESIndividual blister: no cross-contamination and easy selection

Translucent. Aesthetic and good light conduction

Rough surface. Exceptional cohesion with the composite and/or the cement

Radio-opaque (210% Al equivalent)

Elasticity modulus close to that of the tooth. Homoge-neous repartition of the mechanical stress

Elasticity modulus = 60 GPa Flexural strenght = 1500 MPaColour code on top of the post

Biocompatible : no toxicity

No corrosion or tooth structure discoloration

Compatible with all resin-based cements

Sterilization : 135°C, 2.1 Bar, 5 mn. No change in flexural strength

Cylindrical posts with a conical end for the last 2 mm

17www.elsodent.com

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATE

RIA

LTE

MPO

RARY

BR

IDG

ES &

CRO

WN

SCI

MEN

TS &

CA

VITY

LIN

EREQ

UIP

MEN

TRE

STO

RATI

ON

ACCE

SSO

RIES

9. Adhesive application in the root canal and in the pulp chamber

8. Universal adhesive HEALBOND MP

6. Fiberglass handling with hemostats

5. Glass fiber post FP

4. Drying of the root canal with a point of paper

3. Rinse thoroughly

20. Final result

2. Etching

19. Easy removal of cement excess

18. Crown set up

17. Cement application in the intrados

15. Significant collar dyschromia

13. Fiberglass coated with Core D

12. Core D composite injection into the root canal and pulp chamber

11. Adhesive light-curing

10. Adhesive application on the fiber post

1. Set up of the operating field

Devitalized tooth reconstruction by plastic-inserted material (RMIPP) using FP glass fiber, Core-D composite and HealBond MP adhesive, then assembling monolithic crown using opaque cement INNOCEM Dr Christian MOUSSALLY (Paris)

CLINICAL CASE

14. Tooth prepared after gum laser fitting

IMPRESSION

ALGINATEALGIPLUS & ALGIPERFClass A type I dental alginate

SILICONE BY ADDITIONHARMONYVinyl polyxilane impression material

BITE REGISTRATIONSTILL BITEBite registration siliconeDUROCResin-based bite registration material,implant transfer caps splinting

RETRACTIONELSOCORDKnitted retraction cordHEMOSALAstringent gel - 25% aluminum sulfate

19www.elsodent.com

ALGIPLUS & ALGIPERF

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

ALGINATEALGIPLUS & ALGIPERFClass A type I dental alginate

SILICONE BY ADDITIONHARMONYVinyl polyxilane impression material

BITE REGISTRATIONSTILL BITEBite registration siliconeDUROCResin-based bite registration material,implant transfer caps splinting

RETRACTIONELSOCORDKnitted retraction cordHEMOSALAstringent gel - 25% aluminum sulfate

REFERENCES & PRESENTATIONSAP-500 ALGIPLUS 450g bag, dark purple

AA-500 ALGIPERF 500g bag, dark green Dispositif médical de classe I

PHYSICAL PROPERTIES & CHARACTERISTICSALGIPLUS ALGIPERF

Precision 50μ 20μ

Working time 1min 45s 1min 45s

Setting time (in mouth) ~ 30s ~ 30s

Compatibility Suitable with all plasters Suitable with all plasters

Dimensional stability

The impression can be kept for 4 days in an sealed plastic bag 4 days 7 days

NOTE Working and setting times are closely related to water temperature.

Class A type I dental alginate

ADVANTAGESExcellent elasticity: no tear off wand very good recovery after deformations

Thixotropic. Remains in the tray without leaking and gives perfect covering of teeth during printing

Dark colour for a good contrast to allow an easy and fast reading of the impressionte

Anti-microbial action. No decontamination step needed before sending to the laboratory

Mint flavour

20 www.elsodent.com

HARMONY

STILL BITE

REFERENCES & PRESENTATIONSHPN-600 Putty soft, regular setting 2 x 300ml (base + catalyst)

HPF-600 Putty soft, fast setting 2 x 300ml (base and catalyst)l

HM-100 Medium viscosity, regular setting - 2 x 50ml cartridges + 10 mixing tips

HLN-100 Low viscosity, regular setting - 2 x 50ml cartridges + 10 mixing tips

HLF-100 Low viscosity, fast setting - 2 x 50ml cartridges + 10 mixing tips

HM-200 Medium viscosity, regular setting - 4 x 50ml cartridges

HLN-200 Low viscosity, regular setting - 4 x 50ml cartridges

HLF-200 Low viscosity, fast setting - 4 x 50ml cartridges


IJ-100 100 Intra-oral tipsMD : Class I

VISCOSITY & SETTING TIMELow viscosity, regular setting 2-steps impression (Wash Technique)

Low viscosity, fast setting 2-steps impression (Wash Technique)

Medium viscosity, regular setting. For ‘’one step’’ impression procedure

Putty Soft, regular setting

Putty Soft, fast setting

Vinyl polyxilane impression materials

ADVANTAGESSpecially developed to provide a very precise and highly hydrocompatible impression material

Matte appearance for a perfect and fast reading. Correction possible right away, if needed

High compressive strength

Good dimentional stability < 0.2%

Excellent coverage after distorsion > 99%

REFERENCES & PRESENTATIONSSB-100 2 x 50ml cartridges + 10 mixing tips

SB-200 4 x 50ml cartridges

EV-100 100 green mixing tipsMD : Class I

Bite registration silicone

ADVANTAGESFast set (45s) High shore hardness (95 shore A)

High precision 15μ

ThixotropicEasy to trim. Good dimensional stability

Can be scanned with a laser/ optical/ touch system

Indiscernible viscosity for the patient.

INDICATIONSBite registration, in dentistry and orthodontics.

Occlusion keys.

Gnatological evaluations.

Intermaxillary bite registration: centric, protrusion or lateral.

Diagnostic assessments of cranio-mandibular disorders needing afterward an interpretation with a CAO system

Thixotropic. Doesn’t don’t start to flow until the Putty is in place. Improves patient comfort. Accurate and “easy to take” impression.

21www.elsodent.com

DUROC

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSDU-50 50ml cartridge + 10 mixing tips

EJ-100 100 yellow mixing tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin-based bite registration material, implant transfer caps splintingFormulation whithout addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic : does not flow between teeth

Fast setting time ~ 40 s

Blue for a strong contrast

Easy to trim excess

The most rigid bite registration materials available

High flexural strength

Negligible linear shrinkage

Burn with no residue

INDICATIONSIMPLANTOLOGY Fixing together implant transfer caps before final impression

Bite registrationTo quickly and perfectly fix the two parts of a bridge infrastructure

To elaborate inlays cores in direct method

1. Apply material after a slight air-blow

2. Bite registration 3. Bite registration segment after polymerization

CLINICAL PROCEDURE

CLINICAL PROCEDURE

DUROC, implant transfer caps splinting

1 Implant transfers in place before impression.

2 Setting of Duroc is finished, giving free access to screws

3 Fitting 4 Impression made with the implant transfers

5 Replicas are in place (not screwed yet)

CLINICAL PROCEDURE

STILLBITE bite registration DUROC bite registration

1. & 2. Bite registration

22 www.elsodent.com

HEMOSAL

ELSOCORD

REFERENCES & PRESENTATIONSHSA-6 4 x 1,5g / 1,2g syringes + 10 black needle tips

LTL 100 intra-oral black tipsMD : Class IIa certified by Tüv Rheinland (0197).

REFERENCES & PRESENTATIONSC-000 size 000

Bottle with 260cm of cordC-00 size 00

C-0 size 0

C-1 size 1MD : Class I

Astringent gel - 25% aluminum sulfate

ADVANTAGESThixotropic gel. Easy, precise and fast setting

No necrosis or blackening of tissue

Helps reducing gum inflammation

Versatile in use

No contra-indications

Raspberry taste

INDICATIONSRESTORATIVE DENTISTRY Conditioning of the injured gum during the preparation of juxta-gingival class V cavities, to avoid discoloration of the definitive composite restoration

PROSTHETIC PREPARATION Allow a non-traumatic and optimal gum retraction. Apply the gel in the sulcus and insert the retraction cord

ENDODONTIC PROCEDURES When a canal is bleeding

Knitted retraction cord

ADVANTAGES100% cotton cord is knitted into interlocking chains: to facilitate easy packing of cord into sulcus.

Knitted loops absorb and transport significantly greater quantities of hemostatic solution or gel providing more effective hemostasis

Knitted chains provide an excellent medium for gel absorption and placement

Color code for quick and easy size identification

INDICATIONSTaille 000 Very narrow and shallow sulcus

Taille 00 Narrow and shallow sulcus. Impression technique with double cords. The 00 is placed first at the bottom of the sulcus

Taille 0 Narrow sulcus or thin gum. Impression of mandibular incisors

Taille 1 Thick gum or deep sulcus. impressions of other dental sectors

CROWNS & BRIDGES

TEMPORARY MATERIALPHOENIX MDTemporary crown & bridge resinPHOENIXTemporary crown & bridge resin

RELININGTOPBASEThermoplastic for denture relining

24 www.elsodent.com

24

PHOENIX MD

PHOENIX

PHOENIX ExperTemp Structur3 Protemp4 ELSODENT ultradEnt Voco 3M

MPa

REFERENCES & PRESENTATIONSPHMD-50-A1 50ml cartridge + 10 mixing tips - shade A1

PHMD-50-A2 50ml cartridge + 10 mixing tips - shade A2


EJ-100 100 yellow mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESThixotropic. does not flow and can be injected directly into the mouth around the abutment tooth

High flexural strength and slight resilience

Very thin oxygen inhibition layer

A new layer can be applied on top of an existing one up to 2 or 3 days after max.

Setting time = 2min 45s

INDICATIONSINDIRECT METHOD Temporary crowns and long temporary bridges, with a pre-impression

INDIRECT METHOD Temporary crowns directly in mouth. A temporary crown can be made in mouth within 3 min max.

* Tests carried out with a Zwick equipment, according to ISO 11405

REFERENCES & PRESENTATIONSPH-50-A1 50ml cartridge + 10 mixing tips - shade A1

PH-50-A2 50ml cartridge + 10 mixing tips - shade A2

PH-50-A3 50ml cartridge + 10 mixing tips - shade A3

EB-100 100 blue mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESHigh flexural strength > 100 MPaExtremely reduced inhibition oxygen layer: the surface of the cured material is almost dry

Easy and fast to use

Aesthetic

INDICATIONSTemporary crowns

Small temporary bridges, with a pre-impression (indirect method)

Flexural strength*

25www.elsodent.com

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSPHMD-50-A1 50ml cartridge + 10 mixing tips - shade A1



EJ-100 100 yellow mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

• Inject PHOENIX MD in the pre-impression. Check that the nose of the mixing tip is always in contact with the bottom of the pre-impression, to avoid bubbles in the material.

• For incisives, use an intra-oral tip to be able to reach the bottom part of the impression.

• Also use an intra-oral tip to inject resin in the sulcus of the tooth, prior to putting back in the mouth the pre-impression loaded with resin, to get a perfect temporary crown.

• Important notice: do not forget to withdraw the loaded impression from the mouth, after 1 minute

maximum: the resin will be still in a plastic phase (soft) and it will not be blocked by the adjacent teeth. The material will recover after deformation.

• Wait for the resin to set completely in the impression, out of the mouth.

• Take the impression out of the mouth and eliminate the oxygen inhibition layer with a disinfection wipe or with a tissue impregnated with alcohol. This layer is always present in the 2 components resin products. Trim the excess with a diamond bur without water spray.

1. Dents taillées, prêtes pour l’élaboration des provisoires

2. Injection de Phoenix MD dans la pré-empreinte

3. Bridge provisoire dans l’empreinte, non ébarbé

4. Bridge provisoire hors de l’empreinte, non ébarbé

5. Bridge provisoire terminé et poli

1. 35 and 36 prepared.Impression completed.

2. Injection of PHOENIX MD starting by the sulcus.

3. Look of the temporary crowns after bite registration and polymerization

4. Sculpture direclty in the mouth with a diamond bury

5. Temporary crowns finished and polished

• Keep the prepared abutment tooth slightly humid. Put a yellow ring mixing tip and an intra-oral tip on the cartridge and inject PHOENIX MD directly onto the teeth, starting in the sulcus.

• Once, the tooth is completely covered, ask the patient to bite on the uncured resin.

• After about 40 seconds, the resin reaches an elastic phase. Ask the patient to open wide and take the untrimmed temporary crown off the tooth and put it

back a few times, to avoid any blocking with adjacent teeth.

• Trim the excess in the mouth, using a diamond bur, under water spray.

• Trim the proximal walls outside of the mouth.• Polish the crown. Seal it with a temporary luting

cement

CLINICAL PROCEDURE

NOTE This type of resin is very hard and the use of a laboratory bur for resin is not recommended..

DIRECT METHOD

INDIRECT METHOD

26 www.elsodent.com

TOPBASE


TPU TOPBASE Kit of 2 maxillary plates

TPD TOPBASE Kit of 2 mandibular plates

TPCLU TOPBASE Clinical kit of 10 maxillary plates

TPCLD TOPBASE Clinical kit of 10 mandibular plates

TPK TOPBASE Set 1 maxillary plate + 1 mandibular plates

DM class IIa

Thermoplastic plate to reline denturesBIOCOMPATIBLE, BisGMA, TEGDMA, HEMA-FREE

ADVANTAGESVery easy and fast use

No mixing of products

A perfect relining in 10 to 15 minutes only

With a good air dryer, or a heat air gun

Sticks directly and strongly to any type of resins used for dentures

Very economicalAesthetic

Accurate recording of details of the mucosa

Can be re-shaped anytime by re-heating it as many time as needed

Biocompatible, no addition of BisGMA, TEGDMA, HEMA. No toxicity

INDICATIONSSemi-definitive, hard relining of dentures

Demo video

CLINICAL PROCEDURE

1. Clean the intrados of the prosthesis, Make the surface slightly rough, with sandpaper, a bur then rinse with alcohol and dry thoroughly.

2. Center the plate on the intrados of the prosthesis [cf 2a - 2b]3. Heat the plate from the centre to the sides to distribute the

heat evenly. [cf 3]4. Once the plate has softened uniformly, it’s translucent and

adheres directly to the intrados of the prosthesis. [cf 4a - 4b]5. Push the soften plate into the intrados (wet gloves) [cf 5]6. 7. Start immedialtely to remove material in excess, on the

edges of the prosthesis with your fingers wets. [cf 6-7].8. Immerse in hot water (70°C) [cf 8], before putting it in mouth,

to avoid any risk for the plate to sick to the mucosa, in case of hyposalia.

9. Once in mouth, ask the patient to bite firmly for 2 minutes, in order to accurately register all the details of the surface of the mucosa. [cf 9]. Remove from the mouth then eliminate excesses and polish with rubber cup or disc.

TEMPORARY FILLING

PROREZDual-cure composite for temporary fillingELSOTEMPFluoridated temporary filling cement

TEMPORARY CEMENTSEAL TEMP, SEAL TEMP S Temporary resin-based cements

PERMANENT ADHESIVEINNOCEMSelf-adhesive universal permanent resin cement

CAVITY LINERHEALDENT Self-cure linerHI-SEALLight-cure cavity liner

CEMENTS

28 www.elsodent.com

PROREZ

ELSOTEMP

REFERENCES & PRESENTATIONSTPS-B Temporary filling cement 3 x 28g white

TPS-R Temporary filling cement 3 x 28g pink

TPP-B Temporary filling cement 6 x 28g white

TPP-G Temporary filling cement 6 x 28g grey

TPP-R Temporary filling cement 6 x 28g pinkMD : Class IIa certified by Tüv Rheinland (0197).

CONSISTENCYGrey soft

White standard

Pink hard

Eugenol-free, fluoridated temporary filling cement

ADVANTAGESBecause of its unique plasticizer, no expansion will occur during the setting process

No pulp or gum irritations (PH=7)

Fast-setting

Waterproof

Does not dry in the jar, even when opened

Eugenol-free: does not hinder polymerization of resins and composites

Contains fluoride: cariostatic action

Soft before setting to allow a perfect application during the filling process and hard after setting.

Stick to the walls of the tooth: remains in mouth 1 or 2 months, if needed.

Easy to remove

Dual-cure composite for temporary fillingFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESFast setting : 45 sec (self-curing mode)

Easy to place, even in small or narrow cavities, with the dual syringe and its intra-oral tip

ThixotropicWaterproofEasy to remove with a probe or a curette

Aesthetic A3 shade

Fluoride release

INDICATIONS Temporary filling for inlay and onlay preparations

Temporary filling for implant screw holes

Temporary filling for other cavities to be protected (after endodontic treatments...)

REFERENCES & PRESENTATIONSPRZ-16 2 x 5ml dual syringes + 20 mixing tips + 20 intra-

oral tips

EMP-100 100 brown mixing tip

IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

29www.elsodent.com

SEAL TEMP & SEAL TEMP S

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSTPS-B Temporary filling cement 3 x 28g white

TPS-R Temporary filling cement 3 x 28g pink

TPP-B Temporary filling cement 6 x 28g white

TPP-G Temporary filling cement 6 x 28g grey

TPP-R Temporary filling cement 6 x 28g pinkMD : Class IIa certified by Tüv Rheinland (0197).

Temporary resin-based cementsFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESPerio-friendlyThanks to the smooth cement texture, the gum completely heals within 2 to 3 days

Any procedure (impression, etc) can be performed withtout haemostatic problems

Suitable use on vital teeth

Time saving The cement sticks to the intrados of the temporary crowns: The prepared teeth always remain clean

Before putting the temporary crown back on the tooth:

SEAL TEMP : just apply a new layer of cement. If a supra-occlusion occurs, just trim the external surface of the temporary crown.SEAL TEMP S : remove the old layer of cement with tweezers, prior to applying a new one

2 complementary cements for all clinical cases

REFERENCES & PRESENTATION

ST-25 SEAL TEMP 2x 12,5g syringes (base + catalyst)

STD-16 SEAL TEMP 2x 5ml dual syringes + 20 mixing tips

STD-8 SEAL TEMP 1x 5ml dual syringe + 10 mixing tips

STS-25 SEAL TEMP S 2x12,5g syringes (base + catalyst).)

STDS-16 SEAL TEMP S 2x 5ml dual syringes + 20 mixing tips

STDS-8 SEAL TEMP S 1x 5ml dual syringes + 10 mixing tips

EM-100 100 brown mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

INDICATIONSSEAL TEMP - Strong retention strengthTemporary bridges and crowns on low abutment teeth.

Long-term temporary crowns (2-3 months).

Definitive cementation of crowns on implant, except prosthetics elements in Zirconia

SEAL TEMP S - Classic retention strengthTemporary bridges and crowns on normal abutment teeth and implants

Temporary cementation of definitive veneers to valid aesthetic

1. Temporary bridge (try-in)

2. Injection of the cement in the temporary bridge

3. Luting of the temporary bridge

4. Temporary bridge sealed. Excess cement eliminated. Occlusion checked

CLINICAL PROCEDURE

30 www.elsodent.com

INNOCEM Breeze Relix Panavia Cement SmartCem2 G-Cem MaxCem PEntron Unicem Kuraray Resin SE dEntsPly Gc Elite 3M cybErtEch KErr

20 s 6 mn 30 mn

INNOCEM Relyx Panavia Breeze Cement MaxCem G-Cem Unicem Kuraray PEntron Resin SE Elite Gc 3M cybErtEch KErr

INNOCEM Relyx Panavia SmartCem MaxCem Breeze G-Cem Unicem Kuraray 2 Elite PEntron Cement 3M dEntsPly KErr GC

Dentine Métal Zircone Céramique

INNOCEM

REFERENCES & PRESENTATIONSIC-10 -TA2 5ml syringe + 10 mixing tips + 10 regular intra-

oral tips. Translucent A2 shade

IC-10-OA2 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A2 shade

IC-10-OA3 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A3 shade

MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1

Conversion rate*

Flexural strength*

Shear bond strength*

* Tests conducted by G-Pharma. Flexural Strength according to ISO 4049 and carried out with a Zwick equipment. Conversion rate using FTIR spectrometer (ATR). Shear bond strength according to ISO 11405 and carried out with a Zwick equipment

TESTS RESULTS & COMPARISON

Excellent adhesion to Etched ceramic: 23,9 MPa Dentin: 14,10 MPaZirconia: 19,3 MPa Metal: 23,81 MPa

INDICATIONSMetal, composite, etched (or silanisated ceramic) inlays, onlays, crowns and bridges

In conjunction with HEALBOND MP Maryland bridges of 2 to 3 elements Etched (or silanisated) ceramic veneers. Root canal posts (metallic or fiber posts)

Self-adhesive universal permanent resin cementFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESStrong adhesion to dentin, metal, Zirconia, composite and etched (or silanated) ceramic

Unsurpassed conversion rate = 58,40% (30 min.)

Résistance à la flexion excellente = 90 MPa

Fast and easy to use - No pre-treatment required in most cases After 5 seconds of polymerisation, the excesses remain slightly rubbery to be easily removed

Strong hiding power (opaque versions). Perfect for cementation of aesthetic prosthetics elements on implant abutments, or on metallic elements such as inlay core and amalgams

Slight hydrophilia before polymerization for collagen fibers and phosphate ions complexation (vital teeth) and hydrophobia for a long-term and stable adhesion

IMPORTANT NOTICE !INNOCEM formula allows HEALBOND MP to become DUAL without addition of an activator.

20. Final result19. Easy removal of cement excess

18. Crown set up17. Cement application in the intrados

15. Significant collar dyschromia

CLINICAL CASE Assembly of the monolithic crown using opaque cement InnoCem Dr C. MOUSSALLY (Paris)

31www.elsodent.com

HEALDENT

HI-SEAL

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

REFERENCES & PRESENTATIONSD-10 10ml bottle

MD : Class IIa certified by Tüv Rheinland (0197)

REFERENCES & PRESENTATIONSHS-6 4 x 1.2 ml (minimum 2g) syringes + 10 needle tips.

IR-100 100 pink needle tips. G18MD : Class IIa certified by Tüv Rheinland (0197)

INDICATIONSLINER No risk of post-operative sensitivities. Compatible with all bonding agents and restorative materials. Enhanced adhesion of bonding agents by 1 to 2 Mpa.

DESENSITIZER Immediate pain relief on cervical recessions or root exposures.

Before prosthetic sealing on the tooth to avoid sensitivity due to the acidity of cements during the first 24h.

After tooth bleaching & whitening.

After scaling, root planning & perio treatments

Desensitization self-cure linerFormulation without addition of TEGDMA, BisGMA

ADVANTAGESEasy to use. Apply and wait 10 secondes before drying with air

Use pure product undiluted. No dental preparation, mixing or photo-cure needed

Immediate desensitive efficiency. Long lasting effect.

Anti-microbial action (surface)

Light-cure cavity linerFormulation without addition of TEGDMA, BisGMA

ADVANTAGESCompatible with all dental restorative materials or resin cements.

Releases favorable calcium ions, fuoride ions and phosphate ions. These are known to be beneficial to the tooth structure, to stimulate secondary dentin formation and to have cariostatic properties

Very hard after setting and virtually insoluble in water and oral fluids

Can be applied directly from the syringe through pre-bent dispenser tips for precised placement or can be dispensed on a pad or mixing well and placed on the tooth with a suitable instrument

Dentin shade

Radiopaque

ACTION MECHANISMThe resin links to proteins of the dentin and seals the tubulis to isolate the surface of the cavity. the antimicrobial agent kills germs at the surface and fasten the efficiency of the product..

Sodium fluoride reduces the incidence of root surface caries, remineralizing the dentin, to help providing a long-lasting desensitization

NOTE HI-SEAL chemically bonds to adhesive primers, composites and other resin based materials and it micromechanically bonds to dentin

IMPLANTOLOGY

SURGICAL GUIDEDUROC CLEARTranslucent resin for surgical guide

33www.elsodent.com

DUROC CLEAR

IMPR

ESSI

ON

END

OD

ON

TIC

ACCE

SSO

RIES

CORE

BU

ILD

-UP

MAT

ERIA

LTE

MPO

RARY

BR

IDG

ES &

CRO

WN

SCI

MEN

TS &

CA

VITY

LIN

EREQ

UIP

MEN

TRE

STO

RATI

ON

ACCE

SSO

RIES

IMPL

AN

TOLO

GY

SURGICAL GUIDEDUROC CLEARTranslucent resin for surgical guide

REFERENCES & PRESENTATIONSDUCL-50 50ml cartridge + 10 mixing tips

EJ-100 100 yellow mixing tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

INDICATIONSSurgical guides directly in mouth

Stabilization of SICAT plates (Sirona)

Bite registration when unstable

Translucent resin for surgical guideFormulation without addition of TEGDMA, BisGMA, BisGMA

ADVANTAGESResistant but slightly resilient, for an easy removal

A new layer can be applied on top of an existing one and stick to it

Translucent for a better vision of the surgical field

Adequate setting time

Low exothermicity

1. DUROC CLEAR application

2. Insertion of the reference body into the resin

3. Reference body in place 4. System taking off

5. Detection of the reference body

6. Removing the reference body

7. Machining of the drill body

8. Drill body machined

9. Apply the dual self-etching bonding HEALBOND MP around the drill body and inside the surgical guide

10. -Assembling of the 2 parts of the surgical guide

11. Trimming and polishing the surgical guide

12. Surgical guide finished

MAKING OF A SURGICAL GUIDE DIRECTLY IN MOUTH IN A CADCAM ENVIRONMENT

ENDODONTIC

IRRIGATIONENDONEEDLECanulas for root canal irrigation

LIQUID DAMNOTRE DAMMulti-purpose, light-cure liquid dam

35www.elsodent.com

ENDONEEDLE

NOTRE DAM

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

IRRIGATIONENDONEEDLECanulas for root canal irrigation

LIQUID DAMNOTRE DAMMulti-purpose, light-cure liquid dam

Multipurpose light-cure liquid damFormulation without addition of HEMA, TEGDMA, BisGMA

ADVANTAGESLow exothermic reaction to avoid harmful reaction of the mucosa

Excellent thixotropy for an easy setting

Versatile multi-purpose

Blue for a good contrast

REFERENCES & PRESENTATIONSND- 4 2 x 1,2ml syringes + 10 tips

LTL 100 black needle tips. Gauge 20MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.

To ensure a waterproof joint between the tooth and the rubber dam

Gum protection during bleaching sessions at the chair

To built temporarytooth walls

REFERENCES & PRESENTATIONSED30-100 100 canulas G30 - purple

ED27-100 100 canulas G27 - yellow

ED23-100 100 canulas G23 - blue

ED30-30 30 canulas G30 - purple

ED27-30 30 canulas G27 - yellow

ED23-30 30 canulas Gauge 23 - blue

S3-100 100 sterile syringe 3ml Luer Lock

S5-100 100 sterile syringe 5ml Luer LockMD : Class I

INDICATIONSCleaning root canals without risking a perforation of the apex

ADVANTAGESLateral opening and blunt end

Compared to needles with apical opening, a needle with lateral opening and blunt end will prevent any risk of damage at the apex of the tooth (acute desmondontitis), especially with a chronically infected tooth (eg.: widely opened apex) or when the apessification is not complete

The small diameter of the opening allows enough water pressure to expel the debris from the canal

Canulas for root canal irrigation Lateral opening and blunt end

INDICATIONSRestorative dentistry To hold Teflon® film in place when luting aesthetic venners, or making a class II composite involving the contact point

Prosthodontic To fill up undercuts before impression, to avoid tearing off the material

Endodontic To insure a waterproof joint of the rubber dam around a tooth during an endodontic session.To build temporary tooth walls during endodontic sessions, to hold the irrigating liquid in place

Bleaching Protection of soft tissues during bleaching process

ACCESSORIES

GUNS & TIPSGUNSFor dual cartridges 1:1 and compulsTIPSMixing tips & intra-oral tips

APPLICATORSELSOBRUSHDisposable dental applicators

LIGHTINGPROLUXMulti-purpose, intra-oral, lighting system

37www.elsodent.com

EM-100 EMP-100EB-100 EMO-50EJ-100ER-100EV-100

IT-100

IVP-100IMP-100

LTL-100 IR-100 ETL-100

IV-50IJ-100

G-50 G-25

G-10 G-0.25

GUNS & TIPS

CORE

BU

ILD

-UP

MAT

ERIA

LIM

PRES

SIO

NTE

MPO

RARY

BR

IDG

ES &

CRO

WN

SCI

MEN

TS &

CA

VITY

LIN

ERIM

PLAN

TOLO

GY

END

OD

ON

TIC

ACCE

SSO

RIES

EQU

IPM

ENT

REST

ORA

TIO

NA

CCES

SORI

ES

GUNS & TIPSGUNSFor dual cartridges 1:1 and compulsTIPSMixing tips & intra-oral tips

APPLICATORSELSOBRUSHDisposable dental applicators

LIGHTINGPROLUXMulti-purpose, intra-oral, lighting system


EV-100 Green mixing tip (x 100)

ER-100 Pink mixing tip (x 100)

IT-100 Intra-oral tip for ER-100 and EV-100 (x 100)

EJ-100 Yellow mixing tip (x100)

IJ-100 Intra-oral tip for EJ-100 (x 100)

IV-50 Intra-oral tip metal for EJ-100 (x50)

EB-100 Blue mixing tip (x 100

EM-100 Brown mixing tip (x100)

EMP-100 Brown mixing tip flat (x100)

EVP-100 Purple mixing tip, long and flat)

IMP-100 Intra-oral tip for EMP (x 100)

IVP-100 Intra-oral mixing tip, for brown mixing tip EMP/EVP

EMO-50 Yellow mixing tips for automatic mixers (x 50)

IR-100 Intra-oral pink tip G18 (x100)

LTL Intra-oral black tip G20 (x100)

ETL Intra-oral blue tip G25 (x100)

MD : Class I

REFERENCES & PRESENTATIONSG-10 Gun for 10ml 1:1 syringes

G-25 Gun for 25ml 1:1 syringes

G-50 Gun for 50ml 1:1 syringes

G-0.25 Gun for 0,25ml compulsMD : Class I

COMPATIBILITYG-50 Dual cartridges 1:1 50ml

CORE D SC | CORE D LC | HARMONY | STILL BITEDUROC | DUROC CLEAR | PHOENIX | PHOENIX MD

G-25 Dual cartridges 1:1 25ml

CORE D | CORE D SC

G-10 Dual cartridges 1:1 10ml

CORE D | HARMONY | SEAL TEMP | SEAL TEMP SDUROC | PHOENIX

G-0.25 Compuls (unidoses) 0,25ml

PUREFILL 2 | CIRUS+

38 www.elsodent.com

ELSOBRUSH PROLUX

REFERENCES & PRESENTATIONS400EC 4 x 100 applicators (regular size)

400EF 4 x 100 applicators (fine size)

400EXF 4 x 100 applicators (Xfine size)

400ECD 4 x 100 applicators (regular) + dispenser

400EFD 4 x 100 applicators (fine) + dispenserMD : Class I

Disposable dental applicators

ADVANTAGESStiff head for a good and precise scrubbing of dental surfaces.

Stronger working end will bend anywhere to fit any teeth, even those which are hard to reach, with better control.

Pointed other end can be used to pierce unidose of bonding agent.

Wide diameter of the shift gives better grip, even with wet gloves.

3 different sizes fit any technique and adapt to any type of material used.

Different colours to identify different materials during clinical procedures.

Specially designed dispensing box will deliver applicators one by one, to avoid cross-contamination.

A strongly-built, stable and well-designed dispenser is available for frequent use of applicators

INDICATIONSTo apply cements, etchants, sealants, bonding agents, hemostatic solutions, cleansing solutions, conditioner,etc.

ADVANTAGESRelax patient’s muscles, keeping the mouth open.

Move the tongue back, away from the working area.

Provides a powerful and intense light on the working area.

Small and easy to put in place.

No wires.

Induction recharge

INDICATIONSMultiple restorations

Complicated tooth extractions

Endo work (removing of broken post, etc)

Orthodontic treatments

Implantology

TECHNICAL DATAAutonomy: 2h15

Charging time: 2h max.

Waterproof for cold sterilisation

Light intensity 5 x 8000 lux

LED lifetime: 50 000 heures

REFERENCES & PRESENTATIONSPRO PRO 1 induction charger + 1 light unit + 2 auto-

clavable silicone sockets (1 small, 1 big) + 100 disposable protection sleeves.

PRO-MSP2 Silicone sockets, small, x 2

PRO-MSG2 Silicone sockets, large, x 2

GJ-500 500 disposable sleeves 38x203mmMD : Class 1

Multi-purpose, intra-oral, lighting system

Distributeur

EQUIPMENT

CURING-LIGHTULTIMAMulti-wave, Multi-mode, Multi-purpose High performances LED curing-light

NEW

GENERATION

40 www.elsodent.com

Lucirine®, TPO (2,4,6-trimethylbenzoyldiphenylphosphineoxide) PPD (1-Phenylpropane-1,2-dione)

CQ (Camphorquinone)

BOOSTSTANDARDSOFT

MULTI-MODE MULTI-INDICATION

12,3mm

Wavelenght (nm)

Irra

dian

ce (m

W/c

m²/

nm)

Wavelenght (nm)

Irra

dian

ce (m

W/c

m²/

nm)

A unique lens combining UV /Blue /White mini-LEDs

ULTIMA is an innovative multi-wave based technology LED curing light. High performance and multi-purpose, ULTIMA is intuitive, easy-to-use and resistant

LIGHT-YEARS AHEAD...

INNOVATIVE MULTIWAVE TECHNOLOGYA unique lens featuring innovative multiwave LED technology, combining wavelengths with mini-LED UV - blue - white.

XL diameter lens, to fit requirements of dentists and orthodontists. Generates a collimated beam with an optimal diameter of 15mm, with a maximum intensity peak at a distance of 5mm, for precise and consistent polymerization.

WIDE SPECTRUM Powerful, for optimal polymerization of all materials on the market

Wide emission spectrum (385 - 490 nm), to activate all photo-initiators, including the latest generation such as Camphorquinone, Lucirine®, TPO, PPD

XL-DIAMETER LENS! Perfect for general practiceand orthodontics

4 POLYMERIZATION MODES

SOFT > 750 mW/cm²

10 s + beep 5 s

Polymerization close to the pulp (Composites, cavity liners) Low heat release

Polymerization depth ~ 1mm*

STANDARD> 1200m W/cm²

20 s + beep 5 s

Polymerization of composites and cements

Polymerization depth ~ 4mm*

BOOST> 2000 mW/cm²

3 s

Single ceramic veneers bonding

Single brackets bonding

BOOST SEQ> 2000 mW/cm²

10x (3 s ON + 2 s OFF)

Dedicated toorthodontists

2 DIAGNOSIS MODES

DIAGNOSIS | UV LED

120s

Visualization of dental plaque, infected dentin, micro-leakages, old composites restorations and excess resin cements when they contain fluorescent molecules

TRANSILLUMINATION | WHITE LED 120s

Visualization of cracks depth, fissures and subgingival calculus

* Test according to ISO 4049

NOUVEAU

NEW

41www.elsodent.com

IMPR

ESSI

ON

IMPL

ANTO

LOG

YEN

DO

DO

NTI

CAC

CESS

ORI

ESCO

RE B

UIL

D-U

P M

ATER

IAL

TEM

PORA

RY

BRID

GES

& C

ROW

NS

CIM

ENTS

&

CAVI

TY L

INER

EQU

IPM

ENT

REST

ORA

TIO

NAC

CESS

ORI

ES

Universal charger | Extra batteryref. C-BAT ref. BAT-3.7L

Eye protectionref. ULTI-PO

Charging stationref. ULTI-BASE

Concentrator 2mmref. ULTI-CO

TECHNICAL DATAWavelenght 385 - 490 nm

Dimensions Weight : 95 g Length : 210mmDiam max : 20 mm

Battery Type 14650 IMR | 3,7 V

Power Input 100 V…240 V / ~ 50 Hz…60 Hz Output 5V 2.0A

Programmes Multi-purpose 6 modes : Polymerization Standard | Soft | Boost | Sequential Boost Diagnosis | Transillumination

Water resistant IPX4

Warranty 4-years

REFERENCESULTI-G 1 handpiece + 1 station/charger + 1 rechargeable

battery + 100 disposable protection sleeves + 2 eyes protection tips. Aluminium color

ULTI-N 1 handpiece + 1 station/charger + 1 rechargeable battery + 100 disposable protection sleeves + 2 eyes protection. Black matt color

ULTI-CO 2mm concentrator tip

GJ-500 Disposable protection sleeves x500

ULTI-PO Eyes protection silicon x2

BAT-3.7L Extra standard rechageable battery

C-BAT Universal battery charger

Medical Device : class I

Shock-resistant

Classic curing-light

Easy intra-oral access.

LIGHT-YEARS AHEAD...

ROBUSTNESS & RELIABILITYDesigned in a single-piece of anodised aerospace aluminium for great robustness and amazing drop resistance

Water resistant (IPX4)

4-years warranty

WIRELESS CHARGING & CONTINUOUS USE ULTIMA recharges simply placed on its docking station.

Possibility of continuous use with an additional battery + universal charger (see accessories)

The battery exchange is very easy, fast and equipment-free!

DESIGN & ERGONOMICSHandy and very light with a ideal weight of 95 g and a length of 21cm.

The pen-like grip with 3 fingers gives more dexterity.

Slim and compact shape. ULTIMA facilitates intra-oral access

in posterior and anterior without overstretching the mouth

for optimal patient and practitioner comfort.

INTUITIVE & EASY-TO-USE2-button only : ‘‘ON/OFF’’ and ‘‘Mode’’

Indicators of current mode and battery charge status.

Available in 2 finitions : aluminium or matt black.

ULTIMA

NEW

GENERATION

Cover images designed by Freepik

NOTES

LABORATOIRE ELSODENT 35 av du Gros Chêne | BP50072 HERBLAY | 95612 CERGY-PONTOISE CEDEX Tél : +33 1 30 37 75 75 | Fax : +33 1 34 40 07 04 | Email : [email protected]

INFO & CONTACT

+33 (0) 1 30 37 75 75 [email protected]

www.elsodent.com

25TWENTY-FIVE

YEARS

OF MANUFACTURINGPREDICTABLE & RELIABLEDENTAL SOLUTIONS FORC L I N I C A L S U C C E S S

CTGEN-03 EN JAN-20

DENTAL PRODUCTS · Inlays, ceramic or composite veneers, Maryland bridges ADVANTAGES MULTI-PURPOSE...

Documents

Transcript of DENTAL PRODUCTS · Inlays, ceramic or composite veneers, Maryland bridges ADVANTAGES MULTI-PURPOSE...