Dental Implants Parts

128
Spare Parts for: Steri-Oss Replace Replace Select Systems procedures & products English Deutsch Español Français Italiano Portugés

description

Dental implant fittings

Transcript of Dental Implants Parts

Page 1: Dental Implants Parts

Spare Parts for:Steri-Oss™

Replace™

Replace Select™ Systems

procedures & products

EnglishDeutschEspañolFrançaisItaliano

Portugés

Page 2: Dental Implants Parts

Patents

Products in this catalog may be protected by one or more of the following United States patents: 4 763 788, 5 064 425, 5 269 685, 5 362 236, 5 525 314, 5 564 926, 5 842 859, 6 305 938, 6 319 000, 6 362 137,

Des 353 674 and corresponding patents in other countries.

First from Nobel Biocare. NobelPerfect® (NP, RP, WP), NobelDirect® (NP, RP, WP), Brånemark System®, NobelReplace® andNobelSpeedy™ Implants. A complete assortment with FDA clearance for Immediate Function

in all single, partial and fully edentulous restorations in the mandible and maxilla.

Nobel Biocare AB and all production units are certified according to the Environmental Management System ISO 14001.

Nobel Biocare is in compliance withISO 13485:2003 and Council Directive 93/42/EEC

Canadian Medical Devices Regulation.

0086

For USA only: Federal law restricts this device to be sold by a licensed dentist or physician.All products are subject to change without notice.

Some products may not be available in all markets. Please contact your local Nobel Biocare office for current product assortment and availability.

Page 3: Dental Implants Parts

IntroductionSpare Parts for Steri-Oss™, Replace™ and Replace Select™ Systems . . . . . . . . . . 4

Healing Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Direct Abutment, Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Direct Abutment, Non-Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PME Transmucosal Abutment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Transfer Impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Conical Abutment Gold Coping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Product CatalogReplace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–14Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–18Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Portugés . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Table of Contents

List of Contents NobelEsthetics®

3

Eng

lish

Page 4: Dental Implants Parts

Nobel Biocare now provides you with more choicesthan ever before. As Steri-Oss™ and Replace™

Systems may be replaced with new, improvedalternatives, we will extend our service and pro-vide you with spare parts needed to maintain theexisting fabricated restorations.

DefinitionSpare parts are prosthetic components and instru-ments in the Nobel Biocare product range thatare essential to maintaining existing fabricatedrestorations on patients (clinical demand).

Note: No product returns are accepted.

Product Facts Many of the spare parts have been, or will be,subject to the same changes as the ordinary prod-uct range, including new labels and packaging.Some product names have been slightly changedto harmonize with the ordinary products. Thesechanges are being introduced gradually.

C&B&I™ – A new way to think… and act!

4

IntroductionSpare Parts for Steri-Oss™, Replace™ and Replace Select™ Systems

Introduction NobelEsthetics®

Eng

lish

Page 5: Dental Implants Parts

Healing AbutmentThis device allows the formation of a soft tissuecollar around the implant.

ContraindicationsShould not be used to support a temporaryrestoration.

Cleaning and Sterilization RecommendationThe devices are delivered sterile. Opened pack-ages of abutments that have never entered theoral cavity of a patient may be cleaned and steamautoclaved, according to established procedures,at the local hospital or clinic.

ProcedureThe Healing Abutment is connected to theimplant with the 0.050" hexagon screwdriver.Before final tightening, verify with a radiographthat the abutment is completely seated to confirmthe metal-to-metal interface.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the Healing Abutment. Professionals using Steri-Oss™ and Replace™

Systems should obtain appropriate training andeducation for their particular level of treatment.Contact Nobel Biocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

5

NobelEsthetics® Healing Abutment

Healing Abutment

Steri-Oss™ Replace™ Hex Height MaterialImplant (mm) Implant (mm) (mm)

Healing Abutment 3.25 3.5 3 Ti-Alloy

Healing Abutment 3.8/4.5 4,3 3 Ti-Alloy

Healing Abutment 5.0 5.0 3 Ti-Alloy

Healing Abutment 6.0 6.0 3 Ti-Alloy

Supplementary Products: 0.050" Hex ScrewdriverFor article numbers, see Product Catalog pages 12,16.

Pro

duc

t Fa

cts

Eng

lish

Page 6: Dental Implants Parts

Direct Abutment, EngagingThis device is first processed by thelab. It is a permanent intra-oral abut-ment that is secured to the implantfor a single screw-retained restora-tion. It can also be used to fabricate acustom abutment for a cementablerestoration.

ProcedureAfter the lab has processed the Direct Abutment,it is tightened with the manual 0.050" hexagonscrewdriver. The abutment should interlock withthe implant’s external hex. Before tightening to35 Ncm, verify with a radiograph that the abut-

ment is completely seated to confirm the metal-to-metal interface.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the Direct Abutment. Professionals usingSteri-Oss™ and Replace™ Systems should obtainappropriate training and education for their par-ticular level of treatment Contact Nobel Biocarefor further information.

Note: If non-original (non Nobel Biocare) compo-nents/ instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

Chemical Composition Melting Range Coeff of Thermal Expansion

Element % by weightAu 60 1400 – 1490 °C 12.4 µm/m K at 600 °CPt 19Pd 20Ir 1

Recommended casting on alloys: Ceramic bonding alloys: High gold content (min 75% Au) alloys, standard ISO/DIS9693, NIOM type a.Conventional gold alloys: High gold content (min 75% Au + Pt metal), standard ISO 1562 type 4.

Solder working in the range of 800 °C is recommended.

6

Direct Abutment, Engaging

Gold/Plastic Steri-Oss™ Replace™ Hex Height MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Engaging 3.25 3.5 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 3.8/4.5 4.3 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 5.0 5.0 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 6.0 6.0 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Pro

duc

t Fa

cts

Direct Abutment, Hexed NobelEsthetics®

Plastic Steri-Oss™ Replace™ Hex Height MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment 3.25 3.5 10 Plastic

Engaging 3.8/4.5 4.3 10 Plastic

Plastic 5.0 5.0 10 Plasticincludes a TorqTite™ Screw 6.0 6.0 10 Plastic

Supplementary Products: Open Tray Transfer Assembly, Implant Analog, 0.050" Hex Driver, Polishing CapFor article numbers, see Product Catalog pages 12,16.

Eng

lish

Page 7: Dental Implants Parts

Direct Abutment, Non-Engaging

Direct Abutment, Non-EngagingThis device is first processed by the lab. It isintended as a permanent intra-oral abutmentsecured to the implant for a splinted, multiple-unit, screw-retained restoration.

ProcedureAfter the lab has processed the splinted frame-work/ restoration, it is then placed and tightened

with the manual 0.050" hexagon screwdriver.Before tightening to 35 Ncm, verify with a radi-ograph that all abutments are completely seatedto confirm the metal-to-metal interface and pas-sive fit.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the abutment. Professionals using Steri-Oss™ and Replace™

Systems should obtain appropriate training andeducation for their particular level of treatment.Contact Nobel Biocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

Steri-Oss™ Replace™ Hex Height MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Non-Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 4,3 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleeveincludes a TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Chemical Composition Melting Range Coeff of Thermal Expansion

Element % by weightAu 60 1400 – 490 °C 12.4 µm/m K at 600 °CPt 19Pd 20Ir 1

Recommended casting on alloys: Ceramic bonding alloys: High gold content (min 75% Au) alloys, standard ISO/DIS9693, NIOM type a.Conventional gold alloys: High gold content (min 75% Au + Pt metal), standard ISO 1562 type 4.

Solder working in the range of 800 °C is recommended.

Supplementary Products: Open Tray Transfer Assembly, Implant Analog, 0.050" Hex Driver, Polishing CapFor article numbers, see Product Catalog pages 12,16.

7

NobelEsthetics® Direct Abutment, Non-HexedPr

od

uct

Fact

s

Eng

lish

Page 8: Dental Implants Parts

PME Transmucosal AbutmentThis abutment is used for a multiple-unit screw-retained prosthesis for an implant with less than a40° divergent profile.

ContraindicationsThe PME Transmucosal Abutment supports single-tooth restorations.

Cleaning and Sterilization RecommendationThe devices are delivered sterile. Opened pack-ages of abutments that have never entered theoral cavity of a patient may be cleaned and steamautoclaved according to established proceduresfor similar products at a local hospital or clinic.

ProcedurePlace the PME Transmucosal Abutment with theTransmucosal Abutment Wrench. Verify with a radiograph that the abutment is completely seat-ed to confirm the metal-to-metal interface withthe implant. Finish tightening with the torquewrench at 35 Ncm and with the TransmucosalAbutment Insert. Tighten the restoration onto thePME Abutments with coping screws tightenedand torqued to 35 Ncm.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the PME Transmucosal Abutment. Notethat the torque wrench cannot be used to tightenthe titanium-healing cap that is placed over theabutment prior to temporization. Professionalsusing Steri-Oss™ and Replace™ Systems shouldobtain appropriate training and education fortheir particular level of treatment. Contact NobelBiocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

PME Transmucosal Abutment

Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Height (mm) Implant (mm) Height (mm)

PME Transmucosal Abutment 3.25 3.75, 5 3.5 3.5, 4.5, 5.5 Ti-Alloy (abutment)includes healing cap Ti-Alloy coping screw

PME Transmucosal Abutment 3.8/4.5 3,4,5 4.3 3.25, 4.25, Ti-Alloy (abutment)includes healing cap 5.25 Ti-Alloy coping screw

PME Transmucosal Abutment 5.0 3.25, 4,25, 5.0 3.25, 4.25, Ti-Alloy (abutment)includes healing cap 5.25 5.25 Ti-Alloy coping screw

Steri-Oss™ Steri-Oss™ Replace ReplaceNon-Hex Non-Hex Select™ Select™ Material

Implant (mm) Height (mm) Implant (mm) Height (mm)

PME Transmucosal Abutment 3.25 3 3.5 2,3,4,5 Ti-Alloy (abutment)includes healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 3.8 2,3,4 4.3 2,3,4,5 Ti-Alloy (abutment)includes healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 5.0 2,3,4,5 Ti-Alloy (abutment)includes healing cap screw Ti-Alloy coping screw

Supplementary Products: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, HexedCoping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench,Torque Wrench Insert, Transmucosal Abutment. For article numbers, see Product Catalog pages 13,15,17.

Pro

duc

t Fa

cts

PME Transmucosal Abutment NobelEsthetics®

8

Eng

lish

Page 9: Dental Implants Parts

O-Ring AbutmentThis abutment is a permanent intra-oral abutmentsecured to the implant for implant-retained, tis-sue-supported overdentures, typically with two ormore relatively parallel (<10°) implants.

ContraindicationsThe O-Ring Abutment supports single-toothrestorations and/or implants less than 13 mm in length.

Cleaning and Sterilization RecommendationThe devices are delivered sterile. Opened pack-ages of abutments that have never entered theoral cavity of a patient may be cleaned and steamautoclaved according to established proceduresfor similar products at a local hospital or clinic.

ProcedurePlace the O-Ring Abutment. Verify with a radi-ograph that the abutment is completely seated to confirm the metal-to-metal interface. Tightento 35 Ncm. Take an impression directly over theO-Ring Abutment and send to a lab. Relieve thedenture over the abutment, if necessary. Place thedenture and check occlusion.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the O-Ring Abutment. Professionals using Steri-Oss™ and Replace™

Systems should obtain appropriate training andeducation for their particular level of treatment.Contact Nobel Biocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

Pro

duc

t Fa

cts

Steri-Oss™ Replace™ Hex Height MaterialImplant (mm) Implant (mm) (mm)

O-Ring Abutment 3.25 3.5 2.5, 4 Ti-Alloy (abutment)

O-Ring Abutment 3.8/4.5 4.3 2,3,4* Ti-Alloy (abutment)

O-Ring Abutment 5.0 2 Ti-Alloy (abutment)

*4 mm only available for 3.8 /4.5

Steri-Oss™ Non-Hex Steri-Oss™ Non-Hex MaterialImplant (mm) Height (mm)

O-Ring Abutment 3.8 2 Ti-Alloy

O-Ring Abutment 3.25 2 Ti-Alloy

Supplementary Products: O-Ring Abutment Analog and Spacer, White Clinical O-Rings, Retainer Rings

Note: O-Rings and Retainer Rings must be purchased separately.For article numbers, see Product Catalog pages 14,17.

NobelEsthetics® O-Ring Abutment

9

O-Ring Abutment

Eng

lish

Page 10: Dental Implants Parts

Transfer ImpressionThis device is used when the location, angulationof the hex or internal chamber of the implant willbe transferred to a diagnostic model. The implant impression will give the lab a working model of the implant.

ContraindicationsThe Transfer Impression must not be used as atemporary abutment.

ProcedurePlace the appropriate Open-Tray TransferAssembly over the implant and tighten with the

0.050" hex driver. Verify with a radiograph thatthe abutment is completely seated to confirm themetal-to-metal interface. Record an impressionusing a tray with a window cut out above theassembly. The retaining screw must protrudethrough the opening of the impression tray andbe clearly visible. After the material has set, loosenand remove the impression.

PrecautionsIt is imperative that all tissue and bone fragmentsbe removed from the implant interface beforeseating the Transfer Impression.Professionals using Steri-Oss™ and Replace™

Systems should obtain appropriate training andeducation for their particular level of treatment.Contact Nobel Biocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

Transfer Impression

Steri-Oss™

Non-Hex Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Implant (mm) (mm) Implant (mm) (mm)

Transfer Impression 3.25 4.5 3.5 3.5 Ti-AlloyComponents – Open Tray

Transfer Impression 3.8/4.5 4.5 4.3 4.5 Ti-AlloyComponents – Open Tray

Transfer Impression 5.0 6.0 5.0 6.0 Ti-AlloyComponents – Open Tray

Transfer Impression 6.0 6.0 6.0 6.0 Ti-AlloyComponents – Open Tray

Transfer Impression 3.25 Ti-AlloyComponents – Open Tray

Supplementary Products: 0.050" Hex ScrewdriverFor article numbers, see Product Catalog pages 14,18.

Pro

duc

t Fa

cts

Transfer Impression NobelEsthetics®

10

Eng

lish

Page 11: Dental Implants Parts

Conical Abutment Gold CopingThe copings are incorporated in final prostheticrestoration by casting on procedure or soldering.

Professionals using Steri-Oss™ and Replace™

Systems should obtain appropriate training andeducation for their particular level of treatment.Contact Nobel Biocare for further information.

Note: If non-original (non Nobel Biocare) compo-nents/instruments are used, no claims can be madeas to their safety and efficacy. Warranties relating toNobel Biocare could be rendered null and void.

Conical Abutment Gold Coping

Chemical Composition Melting Range Coeff of Thermal Expansion

Element % by weightAu 60 1400 – 1490 °C 12.4 µm/m K at 600 °CPt 19Pd 20Ir 1

Recommended casting on alloys: Ceramic bonding alloys: High gold content (min 75% Au) alloys, standard ISO/DIS9693, NIOM type a.Conventional gold alloys: High gold content (min 75% Au + Pt metal), standard ISO 1562 type 4.

Solder working in the range of 800 °C is recommended.

Supplementary Products: 0.050" Hex Screwdriver, Analog Conical AbutmentFor article numbers, see Product Catalog page 18.

NobelEsthetics® Conical Abutment Gold Coping

Pro

duc

t Fa

cts

11

Steri-Oss™ MaterialImplant (mm)

Conical Abutment, Gold Coping 3.25 Gold Alloy

Conical Abutment, Gold Coping 3.8/4.5 Gold Alloy

Eng

lish

Page 12: Dental Implants Parts

Product Catalog – Replace™ External Hex NobelEsthetics®

Product CatalogReplace™ External Hex

Article Number Component Old Article Number

Healing Abutments

35300 Healing Abutment 3.5 × 3 mm, 3.5 mm Replace™ Hex43300 Healing Abutment 4.5 × 3 mm, 4.3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5.0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6.0 mm HL/Replace™ Hex

Supplementary Products2085 Screwdriver Hex 0.050" Length 0.7" 2086 Screwdriver Hex 0.050" Length 1.25"

Direct Abutment

3.5 mm35511 Direct Abutment Engaging Gold/Plastic, 3.5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3.5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3.5 Replace™ Hex

4.3 mm43511 Direct Abutment Engaging Gold/Plastic, 4.3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4.3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4.3 Replace™ Hex

5.0 mm5029 Direct Abutment Engaging Plastic, 5.0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5.0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5.0 HL/Replace™ Hex

6.0 mm6105 Direct Abutment Engaging Gold/Plastic, 6.0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6.0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6.0 HL/Replace™ Hex

Supplementary Products31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace™ Hex 4370243714 Implant Analog 4.3 Replace™ Hex43708 Polishing Cap Implant 4.3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0.050" Length 0.75"2086 Screwdriver Hex 0.050" Length 1.25"

12

Eng

lish

Page 13: Dental Implants Parts

Replace™ External Hex

Article Number Component Old Article Number

PME Transmucosal Abutment

3.5 mm61550 PME Transmucosal Abutment 3.5 mmH, 3.5 Replace™ Hex61551 PME Transmucosal Abutment 4.5 mmH, 3.5 Replace™ Hex61552 PME Transmucosal Abutment 5.5 mmH, 3.5 Replace™ Hex

4.3 mm61553 PME Transmucosal Abutment 3.25 mmH, 4.3 Replace™ Hex61554 PME Transmucosal Abutment 4.25 mmH, 4.3 Replace™ Hex61555 PME Transmucosal Abutment 5.25 mmH, 4.3 Replace™ Hex

5.0 mm61943 PME Transmucosal Abutment 3.25 mmH, 5.0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4.25 mmH, 5.0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5.25 mmH, 5.0 HL/Replace™ Hex

Supplementary Products31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Product Catalog – Replace™ External Hex

13

Eng

lish

Page 14: Dental Implants Parts

14

Replace™ External Hex

Article Number Component Old Article Number

O-Ring Abutment

3.5 mm31553 O-Ring Abutment 2.5 mmH, 3.5 mm Replace™ Hex 3560131554 O-Ring Abutment 4.0 mmH, 3.5 mm Replace™ Hex 35602

4.3 mm31555 O-Ring Abutment 2 mmH, 4.3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4.3 mm Replace™ Hex 43601

5.0 mm31557 O-Ring Abutment 2 mmH, 5.0 mm Replace™ Hex 50600

Supplementary Products2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3.5 mm31531 Transfer Assembly Hex Open Tray 3.5 mmD, 3.5 Replace™ Hex 35702

4.3 mm31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace™ Hex 43702

5.0 mm31533 Transfer Assembly Hex Open Tray 6.0 mmD, 5.0 HL/Replace™ Hex 5049

6.5 mm31534 Transfer Assembly Hex Open Tray 6.0 mmD, 6.0 HL/Replace™ Hex 60701

Supplementary Products2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"

Product Catalog – Replace™ External Hex NobelEsthetics®

14

Eng

lish

Page 15: Dental Implants Parts

Replace Select™

Article Number Component Old Article Number

PME Transmucosal Abutment

3.5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4.3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5.0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Supplementary Products31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Product Catalog – Replace Select™

15

Eng

lish

Page 16: Dental Implants Parts

Steri-Oss™

Article Number Component Old Article Number

Healing Abutments

3.25 mm2385 Healing Abutment 4.5 × 3 mm, 3.25 mm HL

3.8 mm/4.5 mm2213 Healing Abutment, 4.5 × 3 mm, 3.8/4.5 HL

5.0 mm5013 Healing Abutment, 6 × 3 mm, 5.0 HL/Replace™ Hex

6.0 mm6100 Healing Abutment, 6 × 3 mm, 6.0 HL/Replace™ Hex

Supplementary Products2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"

Direct Abutment

3.25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3.25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3.25 HL2384 Direct Abutment, Engaging, Plastic 3.25 HL

3.8 mm/4.5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3.8/4.5 HL2262 Direct Abutment, Engaging, Plastic, 3.8/4.5 HL

5.0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5.0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5.0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5.0 HL/Replace™ Hex

6.0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6.0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6.0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6.0 HL/Replace™ Hex

Supplementary Products31532 Transfer Assembly Hex Open Tray 4.5 mmD, 4.3 Replace™ Hex 4370243714 Implant Analog 4.3 mm/Replace™

43708 Polishing Cap Implant 4.3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0.050" Length 0.75" 2086 Screwdriver Hex 0.050" Length 1.25"

Product Catalog – Steri-Oss™ NobelEsthetics®

16

Eng

lish

Page 17: Dental Implants Parts

Steri-Oss™

Article Number Component Old Article Number

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3.25 mm2157 PME Transmucosal Abutment 3 mmH, 3.25 mm Non-Hex2390 PME Transmucosal Abutment 3.75 mmH, 3.25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3.25 mm HL

3.8 mm/4.5 mm2123 PME Transmucosal Abutment 2 mmH, 3.8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3.8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3.8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3.8/4.5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3.8/4.5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3.8/4.5 mm HL

5.0 mm61943 PME Transmucosal Abutment 3.25 mmH, 5.0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4.25 mmH, 5.0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5.25 mmH, 5.0 HL/Replace™ Hex

Supplementary Products31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3.25 mm31548 O-Ring Abutment 2.5 mmH, 3.25 mm HL 242731549 O-Ring Abutment 4.0 mmH, 3.25 mm HL 242831711 O-Ring Abutment 2 mmH, 3.25 mm Non-Hex 2488

3.8 mm/4.5 mm31550 O-Ring Abutment 2 mmH, 3.8/4.5 HL 248231551 O-Ring Abutment 3 mmH, 3.8/4.5 HL 248331552 O-Ring Abutment 4 mmH, 3.8/4.5 HL 248431710 O-Ring Abutment 2 mmH, 3.8 mm Non-Hex 2485

Note: O-Rings and Retainer Rings must be purchased separately.

Supplementary Products2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Product Catalog – Steri-Oss™

17

Eng

lish

Page 18: Dental Implants Parts

Steri-Oss™

Article Number Component Old Article Number

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3.25/3.8/4.5 HL

Supplementary Products2688 Analog Conical Abutment 3.25/3.8/4.5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3.25 Non-Hex2464 Coronal Screw Set 3.8 Non-Hex

Supplementary Products2085 Screwdriver Hex 0.050" Length 0.75"2472 Torque Wrench Insert Hex 0.050" Short

Transfer Impression Components

3.25 mm31529 Thread Timed Transfer Pin 3.25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4.5 mmD, 3.25 mm HL 2640

3.8 mm/4.5 mm31709 Transfer Assembly Hex Open Tray, 4.5 mmD, 3.8/4.5 HL 2317

5.0 mm31533 Transfer Assembly Hex Open Tray, 6.0 mmD 5049

5.0 mm HL/Replace™ Hex

6.0 mm31534 Transfer Assembly Hex Open Tray 6.0 mmD 6.0 HL/Replace™ Hex 60701

Supplementary Products2085 Screwdriver Hex 0.050" Length 0.75"2086 Screwdriver Hex 0.050" Length 1.25"

Product Catalog – Steri-Oss™ NobelEsthetics®

18

Eng

lish

Page 19: Dental Implants Parts

MiscellaneousArticle Number Component Old Article Number

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0.050" Length 0.75"2086 Screwdriver Hex 0.050" Length 1.25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0.030" Length 0.75"2432 Screwdriver Hex 0.030" Length 1.25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0.050" Short2473 Torque Wrench Insert Hex 0.050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5.0 HL/Replace™ Hex35706 Implant Analog, 3.5 mm/Replace™ Hex43714 Implant Analog, 4.3 mm/Replace™ Hex2687 Implant Analog, 3.8/4.5 HL6129 Implant Analog, 6.0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3.5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4.3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5.0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3.25/3.8/4.5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3.25/3.8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3.8/4.3/4.5/5.0/6.0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3.25 HL/3.5 Replace™ Hex31707 Abutment Screw Slot 3.25 HL/3.5 Replace™ Hex 62200

NobelEsthetics® Miscellaneous

19

Eng

lish

Page 20: Dental Implants Parts

Deu

tsch

Page 21: Dental Implants Parts

EinführungErsatzteile für Steri-Oss™, Replace™ und Replace Select™ Systeme. . . . . . . . . . 22

Healing Abutment (Gingivaformer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Direct Abutment, rotationsgesichert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Direct Abutment, nicht rotationsgesichert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

PME Transmucosal Abutment (Transmukosales PME-Abutment) 26

O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Abformpfosten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Conical Abutment Gold Coping

(Goldkappe für konisches Abutment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ProduktkatalogReplace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–32Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34–36Verschiedenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Inhaltsverzeichnis

Inhalt NobelEsthetics®

21

Deu

tsch

Page 22: Dental Implants Parts

Jetzt bietet Nobel Biocare Ihnen eine größere Auswahlunterschiedlicher Lösungen als je zuvor. Nachdem Steri-Oss™ und Replace™ Systeme durchneue, verbesserte Alternativen ersetzt wurden, erwei-tern wir unseren Service und stellen Ihnen dieErsatzteile bereit, die zur Erhaltung der bereits gefertig-ten Restaurationen erforderlich sind.

DefinitionErsatzteile sind prothetische Komponenten undInstrumente in der Produktpalette von Nobel Biocare,die zur Erhaltung der bereits gefertigten Restaurationenvon Patienten notwendig sind (klinische Anforderung).

Achtung: Diese Produkte können nicht zurückgegebenwerden.

ProduktdatenViele der Ersatzteile unterliegen denselben Änderungenwie die gängige Produktpalette, neue Etiketten undVerpackungen eingeschlossen. Einige Produktnamenwurden geringfügig geändert, damit sie mit den gän-gigen Produkten harmonisieren. Diese Änderungenwerden nach und nach eingeführt.

C&B&I™ – Eine neue Art zu denken...und zu handeln!

22

EinführungErsatzteile für Steri-Oss™, Replace™ und Replace Select™ Systeme

Einführung NobelEsthetics®

Deu

tsch

Page 23: Dental Implants Parts

Healing Abutment (Gingivaformer)Dieses Produkt ermöglicht die Ausbildung einerWeichgewebemanschette um das Implantat.

KontraindikationenDas Produkt sollte nicht zur Unterstützung einer provi-sorischen Versorgung verwendet werden.

Empfehlungen zum Reinigen und SterilisierenDie Produkte werden steril geliefert. Abutments, derenVerpackung geöffnet wurde, die aber noch keinenKontakt zur Mundhöhle eines Patienten hatten, könnenentsprechend der üblichen klinischen Richtlinien gereinigtund dampfsterilisiert werden.

VorgehensweiseDer Gingivaformer wird mit dem Sechskantschrauben -dreher von 0,050 Zoll auf das Implantat geschraubt.Stellen Sie vor dem endgültigen Festziehen anhand einesRöntgenbildes sicher, dass das Abutment vollständig aufdem Kopf des Implantates sitzt.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des Gingivaformers vom Implantatübergangentfernt werden. Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweiligeBehandlungsmethode vorbereiten. Wenden Sie sich anNobel Biocare, um weitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null undnichtig erklärt werden.

23

NobelEsthetics® Healing Abutment (Gingivaformer)

Healing Abutment (Gingivaformer)

Steri-Oss™ Replace™ Hex Höhe MaterialImplantat (mm) Implantat (mm) (mm)

Healing Abutment (Gingivaformer) 3,25 3,5 3 Titanlegierung

Healing Abutment (Gingivaformer) 3,8/4,5 4,3 3 Titanlegierung

Healing Abutment (Gingivaformer) 5,0 5,0 3 Titanlegierung

Healing Abutment (Gingivaformer) 6,0 6,0 3 Titanlegierung

Ergänzungsprodukte: 0,050-Zoll-SechskantschraubendreherDie entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.

Pro

duk

tdat

en

Deu

tsch

Page 24: Dental Implants Parts

Direct Abutment, rotationsgesichertDieses Produkt wird zuerst im Labor bear-beitet. Es handelt sich um ein permanentesintraorales Abutment, das für eine ver-schraubte Einzelversorgung am Implantatbefestigt wird. Es kann auch zur Herstellungeines individuell gefertigten Abutments für

eine Zementierungsversorgung verwendet werden.

VorgehensweiseNach der Bearbeitung des Direct Abutments im Laborwird es mit dem manuellen Sechskantschraubendrehervon 0,050 Zoll angezogen. Das Abutment sollte über eineAußensechskantverbindung mit dem Implantat verbun-den werden. Stellen Sie vor dem endgültigen Festziehenmit 35 Ncm anhand eines Röntgenbildes sicher, dass das

Abutment vollständig auf dem Kopf des Implantates sitzt.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des Direct Abutments vom Implantatübergangentfernt werden. Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweiligeBehandlungsmethode vorbereiten. Wenden Sie sich anNobel Biocare, um weitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null undnichtig erklärt werden.

Chemische Zusammensetzung Schmelzbereich Wärmeausdehnungskoeffizient

Element % nach GewichtGold 60 1400 – 1490 °C 12,4 µm/m K bei 600 °CPlatin 19Palladium 20Iridium 1

Empfohlene Ausbettung für Legierungen: Adhäsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold),Standard ISO/DIS9693, NIOM Typ A.Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall),Standard ISO 1562 Typ 4.

Lötarbeiten werden im Bereich von 800 °C empfohlen.

24

Direct Abutment, rotationsgesichert

Gold/Kunststoff Steri-Oss™ Replace™ Hex Höhe MaterialImplantat (mm) Implantat (mm) (mm)

Direct Abutment, rotationsgesichert 3,25 3,5 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, rotationsgesichert 3,8/4,5 4,3 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, rotationsgesichert 5,0 5,0 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, rotationsgesichert 6,0 6,0 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Pro

duk

tdat

enDirect Abutment, rotationsgesichert NobelEsthetics®

Kunststoff Steri-Oss™ Replace™ Hex Höhe MaterialImplantat (mm) Implantat (mm) (mm)

Direct Abutment 3,25 3,5 10 Kunststoff

Rotationsgesichert 3,8/4,5 4,3 10 Kunststoff

Kunststoff 5,0 5,0 10 Kunststoffeinschließlich TorqTite™-Schraube 6,0 6,0 10 Kunststoff

Ergänzungsprodukte: Übertragungseinheit mit offenem Löffel, Implantatreplika, 0,050-Zoll-Sechskantschraubendreher, PolierkappeDie entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.

Deu

tsch

Page 25: Dental Implants Parts

Direct Abutment, nicht rotationsgesichert

Direct Abutment, nicht rotations gesichertDieses Produkt wird zuerst im Labor bearbeitet. Esdient als permanentes intraorales Abutment, das füreine verblockte, mehrgliedrige, verschraubteEinzelversorgung am Implantat befestigt wird.

VorgehensweiseNach der Bearbeitung des verblockten Gerüsts bzw.Versorgungselements im Labor wird es mit dem manu-

ellen Sechskantschraubendreher von 0,050 Zoll einge-setzt und angezogen. Stellen Sie vor dem endgültigenFestziehen mit 35 Ncm anhand eines Röntgenbildessicher, dass das Abutment vollständig und passiv (ohneZwischenraum) auf dem Kopf des Implantates sitzt.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des Abutments vom Implantatübergang entfernt werden. Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweilige Behandlungsmethodevorbereiten. Wenden Sie sich an Nobel Biocare, umweitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null undnichtig erklärt werden.

Steri-Oss™ Replace™ Hex Höhe MaterialImplantat (mm) Implantat (mm) (mm)

Direct Abutment, nicht rotationsgesichert 3,25 3,5 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, nicht rotationsgesichert 4,3 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, nicht rotationsgesichert 5,0 5,0 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Direct Abutment, nicht rotationsgesichert 6,0 6,0 12 Goldlegierung/Kunststoffhülseeinschließlich TorqTite™-Schraube Titanlegierte TorqTite™ (Schraube)

Chemische Zusammensetzung Schmelzbereich Wärmeausdehnungskoeffizient

Element % nach GewichtGold 60 1400 – 1490 °C 12,4 µm/m K bei 600 °CPlatin 19Palladium 20Iridium 1

Empfohlene Ausbettung für Legierungen: Adhäsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold),Standard ISO/DIS9693, NIOM Typ A.Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall),Standard ISO 1562 Typ 4.

Lötarbeiten werden im Bereich von 800 °C empfohlen.

Ergänzungsprodukte: Übertragungseinheit mit offenem Löffel, Implantatreplika, 0,050-Zoll-Sechskantschraubendreher, PolierkappeDie entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 12 und 16.

25

NobelEsthetics® Direct Abutment, nicht rotationsgesichertPr

od

uktd

aten

Deu

tsch

Page 26: Dental Implants Parts

PME Transmucosal Abutment(Transmukosales PME-Abutment)Dieses Abutment wird für eine mehrgliedrige, ver-schraubte Versorgung für ein Implantat mit einemDivergenzprofil von weniger als 40° verwendet.

KontraindikationenDas transmukosale PME-Abutment unterstütztEinzelzahnversorgungen.

Empfehlungen zum Reinigen und SterilisierenDie Produkte werden steril geliefert. Abutments, derenVerpackung geöffnet wurde, die aber noch keinenKontakt zur Mundhöhle eines Patienten hatten, könnenentsprechend der üblichen klinischen Richtlinien für ähn-liche Produkte gereinigt und dampfsterilisiert werden.

VorgehensweiseSetzen Sie das transmukosale PME-Abutment mit dertransmukosalen Abutmentratsche ein. Stellen Sieanhand eines Röntgenbildes sicher, dass das Abutmentvollständig auf dem Kopf des Implantates sitzt. ZiehenSie es schließlich mit der Drehmomentratsche bei 35 Ncm und dem transmukosalen Abutmenteinsatz an.Ziehen Sie die Restauration an den PME-Abutments mitden Abdeckschrauben bei einem Drehmoment von 35 Ncm fest.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des transmukosalen PME-Abutments vomImplantatübergang entfernt werden. Beachten Sie,dass die Drehmomentratsche nicht zum Festziehen derTitaneinheilungskappe verwendet werden kann, die vorder provisorischen Versorgung über dem Abutmenteingesetzt wird. Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweiligeBehandlungsmethode vorbereiten. Wenden Sie sich anNobel Biocare, um weitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null und nichtig erklärt werden.

PME Transmucosal Abutment (Transmukosales PME-Abutment)

Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplantat (mm) Höhe (mm) Implantat (mm) Höhe (mm)

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 3,25 3,75, 5 3,5 3,5, 4,5, 5,5 Titanlegierte Abdeckschraubeeinschließlich Einheilungskappe

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 3,8/4,5 3,4,5 4,3 3,25, 4,25, Titanlegierte Abdeckschraubeeinschließlich Einheilungskappe 5,25

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 5,0 3,25, 4,25, 5,25 5,0 3,25, 4,25, Titanlegierte Abdeckschraubeeinschließlich Einheilungskappe 5,25

Steri-Oss™ Steri-Oss™ Replace ReplaceNon-Hex Non-Hex Select™ Select™ Material

Implantat (mm) Höhe (mm) Implantat (mm) Höhe (mm)

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 3,25 3 3,5 2,3,4,5 Titanlegierte Abdeckschraubeeinschließlich Einheilungskappenschraube

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 3,8 2,3,4 4,3 2,3,4,5 Titanlegierte Abdeckschraubeeinschließlich Einheilungskappenschraube

PME Transmucosal Abutment Titanlegierung (Abutment)(Transmukosales PME-Abutment) 5,0 2,3,4,5 Titanlegierte Abdeckschraubeeinschließlich Einheilungskappenschraube

Ergänzungsprodukte: Offener Löffel für Abformpfosten, PME-Abutment-Replika, PME-Kappe, Gold/Kunststoff, transmukosaleSechskantabdeckschrauben, Schlitzabdeckschrauben, provisorische PME-Kappe, transmukosale Abutmentratsche,Drehmomentratscheneinsatz, transmukosales Abutment. Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 13, 15 und 17.

Pro

duk

tdat

enPME Transmucosal Abutment (Transmukosales PME-Abutment) NobelEsthetics®

26

Deu

tsch

Page 27: Dental Implants Parts

O-Ring AbutmentBei diesem Abutment handelt es sich um ein perma-nentes intraorales Abutment, das für implantatgetra-gene, gewebegestützte Deckprothesen am Implantatbefestigt wird; in der Regel werden mindestens zweirelativ parallele Implantate (<10°) verwendet.

KontraindikationenDas O-Ring Abutment unterstützt Einzelzahnversor -gungen und/oder Implantate mit einer Länge vonweniger als 13 mm.

Empfehlungen zum Reinigen und SterilisierenDie Produkte werden steril geliefert. Abutments, derenVerpackung geöffnet wurde, die aber noch keinenKontakt zur Mundhöhle eines Patienten hatten, könnenentsprechend der üblichen klinischen Richtlinien fürähnliche Produkte gereinigt und dampfsterilisiert werden.

VorgehensweiseSetzen Sie das O-Ring Abutment ein. Stellen Sieanhand eines Röntgenbildes sicher, dass das Abutmentvollständig auf dem Kopf des Implantates sitzt. ZiehenSie es auf 35 Ncm an. Erstellen Sie direkt über dem O-Ring Abutment eine Abformung und senden Siediese an ein Labor. Nehmen Sie die Prothese über demAbutment bei Bedarf ab. Setzen Sie die Prothese einund prüfen Sie die Okklusion.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des O-Ring Abutments vom Implantatübergangentfernt werden. Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweilige Behandlungsmethodevorbereiten. Wenden Sie sich an Nobel Biocare, umweitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null und nichtig erklärt werden.

Pro

duk

tdat

en Steri-Oss™ Replace™ Hex Höhe MaterialImplantat (mm) Implantat (mm) (mm)

O-Ring Abutment 3,25 3,5 2, 5, 4 Titanlegierung (Abutment)

O-Ring Abutment 3,8/4,5 4,3 2, 3, 4* Titanlegierung (Abutment)

O-Ring Abutment 5,0 2 Titanlegierung (Abutment)

*4 mm nur für 3,8/4,5 verfügbar

Steri-Oss™ Non-Hex Steri-Oss™ Non-Hex MaterialImplantat (mm) Höhe (mm)

O-Ring Abutment 3,8 2 Titanlegierung

O-Ring Abutment 3,25 2 Titanlegierung

Ergänzungsprodukte: Replika und Spacer für O-Ring Abutment, weiße klinische O-Ringe, Befestigungsringe

Achtung: O-Ringe und Befestigungsringe müssen separat bestellt werden.Die entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 14 und 17.

NobelEsthetics® O-Ring Abutment

27

O-Ring Abutment

Deu

tsch

Page 28: Dental Implants Parts

AbformpfostenDieses Produkt wird verwendet, wenn die Position bzw. der Winkel der Sechskant- oder Internhöhe desImplantats auf ein Diagnosemodell übertragen wird.Die Implantatabformung bietet dem Labor einArbeitsmodell des Implantats.

KontraindikationenDer Abformpfosten darf nicht als proviso rischesAbutment verwendet werden.

VorgehensweiseSetzen Sie einen individuell gefertigten Abformlöffel füroffene Abformung über dem Implantat ein. Ziehen Sieden Abformpfosten mit dem Sechskantschraubendrehervon 0,050 Zoll an. Stellen Sie anhand eines Röntgenbildes

sicher, dass das Abutment vollständig auf dem Kopfdes Implantates sitzt. Führen Sie eine Abformung unterVerwendung eines individuell gefertigten Abformlöffelsmit ausgeschnittenem Fenster über dem Implantat undAbformpfosten durch. Die Sicherungsschrauben müssendurch die Öffnung des Abformlöffels hindurchragen unddeutlich sichtbar sein. Nach dem Aushärten desMaterials lösen und entfernen Sie die Verschraubungund die Abformung.

VorsichtsmaßnahmenAlle Gewebe- und Knochenreste müssen vor demEinsetzen des Abformpfostens vom Implantatübergangentfernt werden.Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweilige Behandlungsmethodevorbereiten. Wenden Sie sich an Nobel Biocare, umweitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null und nichtig erklärt werden.

Abformpfosten

Steri-Oss™

Non-Hex Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplantat (mm) Implantat (mm) (mm) Implantat (mm) (mm)

Abformpfosten 3,25 4,5 3,5 3,5 TitanlegierungKomponenten – Offener Löffel

Abformpfosten 3,8/4,5 4,5 4,3 4,5 TitanlegierungKomponenten – Offener Löffel

Abformpfosten 5,0 6,0 5,0 6,0 TitanlegierungKomponenten – Offener Löffel

Abformpfosten 6,0 6,0 6,0 6,0 TitanlegierungKomponenten – Offener Löffel

Abformpfosten 3,25 TitanlegierungKomponenten – Offener Löffel

Ergänzungsprodukte: 0,050-Zoll-SechskantschraubendreherDie entsprechenden Artikelnummern finden Sie im Produktkatalog auf den Seiten 14 und 18.

Pro

duk

tdat

enAbformpfosten NobelEsthetics®

28

Deu

tsch

Page 29: Dental Implants Parts

Conical Abutment Gold Coping(Goldkappe für konisches Abutment)Die Kappen werden in die endgültige prothetischeRestauration durch Angießen oder Löten integriert.

Zahnärzte, die Steri-Oss™ und Replace™ Systeme ver-wenden, sollten sich durch entsprechende Schulungenund Fortbildungen auf die jeweilige Behandlungsmethodevorbereiten. Wenden Sie sich an Nobel Biocare, umweitere Informationen zu erhalten.

Achtung: Wenn Komponenten/Instrumente vonDrittherstellern (nicht von Nobel Biocare) verwendet werden,können keine Ansprüche hinsichtlich ihrer Sicherheit undEignung geltend gemacht werden. Garantieansprüchegegenüber Nobel Biocare könnten dadurch für null und nichtig erklärt werden.

Conical Abutment Gold Coping (Goldkappe für konisches Abutment)

Chemische Zusammensetzung Schmelzbereich Wärmeausdehnungskoeffizient

Element % nach GewichtGold 60 1400 – 1490 °C 12,4 µm/m K bei 600 °CPlatin 19Palladium 20Iridium 1

Empfohlene Ausbettung für Legierungen: Adhäsivkeramiklegierungen: Legierungen mit hohem Goldanteil (mind. 75 % Gold), Standard ISO/DIS9693, NIOM Typ A.Konventionelle Goldlegierungen: Hoher Goldanteil (mind. 75 % Gold + Platinmetall), Standard ISO 1562 Typ 4.

Lötarbeiten werden im Bereich von 800 °C empfohlen.

Ergänzungsprodukte: 0,050-Zoll-Sechskantschraubendreher, Replika für konisches AbutmentDie entsprechenden Artikelnummern finden Sie im Produktkatalog auf Seite 18.

NobelEsthetics® Conical Abutment Gold Coping (Goldkappe für konisches Abutment)

Pro

duk

tdat

en

29

Steri-Oss™ MaterialImplantat (mm)

Conical Abutment, Gold Coping 3,25 Goldlegierung(Goldkappe für konisches Abutment)

Conical Abutment, Gold Coping 3,8/4,5 Goldlegierung (Goldkappe für konisches Abutment)

Deu

tsch

Page 30: Dental Implants Parts

Produktkatalog – Replace™ External Hex NobelEsthetics®

ProduktkatalogReplace™ External Hex

Artikelnummer Komponenten Alte Artikelnummer

Healing Abutments

35300 Healing Abutment 3,5 × 3 mm, 3,5 mm Replace™ Hex43300 Healing Abutment 4,5 × 3 mm, 4,3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5,0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6,0 mm HL/Replace™ Hex

Ergänzungsprodukte2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,5 mm35511 Direct Abutment Engaging Gold/Plastic, 3,5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3,5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace™ Hex

4,3 mm43511 Direct Abutment Engaging Gold/Plastic, 4,3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4,3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4,3 Replace™ Hex

5,0 mm5029 Direct Abutment Engaging Plastic, 5,0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6,0 HL/Replace™ Hex

Ergänzungsprodukte31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 Replace™ Hex43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

30

Deu

tsch

Page 31: Dental Implants Parts

Replace™ External Hex

Artikelnummer Komponenten Alte Artikelnummer

PME Transmucosal Abutment

3,5 mm61550 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace™ Hex61551 PME Transmucosal Abutment 4,5 mmH, 3,5 Replace™ Hex61552 PME Transmucosal Abutment 5,5 mmH, 3,5 Replace™ Hex

4,3 mm61553 PME Transmucosal Abutment 3,25 mmH, 4,3 Replace™ Hex61554 PME Transmucosal Abutment 4,25 mmH, 4,3 Replace™ Hex61555 PME Transmucosal Abutment 5,25 mmH, 4,3 Replace™ Hex

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Ergänzungsprodukte31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Produktkatalog – Replace™ External Hex

31

Deu

tsch

Page 32: Dental Implants Parts

Replace™ External Hex

Artikelnummer Komponenten Alte Artikelnummer

O-Ring Abutment

3,5 mm31553 O-Ring Abutment 2,5 mmH, 3,5 mm Replace™ Hex 3560131554 O-Ring Abutment 4,0 mmH, 3,5 mm Replace™ Hex 35602

4,3 mm31555 O-Ring Abutment 2 mmH, 4,3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4,3 mm Replace™ Hex 43601

5,0 mm31557 O-Ring Abutment 2 mmH, 5,0 mm Replace™ Hex 50600

Ergänzungsprodukte2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3,5 mm31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace™ Hex 35702

4,3 mm31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 43702

5,0 mm31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace™ Hex 5049

6,5 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace™ Hex 60701

Ergänzungsprodukte2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Produktkatalog – Replace™ External Hex NobelEsthetics®

32

Deu

tsch

Page 33: Dental Implants Parts

Replace Select™

Artikelnummer Komponenten Alte Artikelnummer

PME Transmucosal Abutment

3,5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4,3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5,0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Ergänzungsprodukte31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Produktkatalog – Replace Select™

33

Deu

tsch

Page 34: Dental Implants Parts

Steri-Oss™

Artikelnummer Komponenten Alte Artikelnummer

Healing Abutments

3,25 mm2385 Healing Abutment 4,5 × 3 mm, 3,25 mm HL

3,8 mm/4,5 mm2213 Healing Abutment, 4,5 × 3 mm, 3,8/4,5 HL

5,0 mm5013 Healing Abutment, 6 × 3 mm, 5,0 HL/Replace™ Hex

6,0 mm6100 Healing Abutment, 6 × 3 mm, 6,0 HL/Replace™ Hex

Ergänzungsprodukte2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3,25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL2384 Direct Abutment, Engaging, Plastic 3,25 HL

3,8 mm/4,5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL2262 Direct Abutment, Engaging, Plastic, 3,8/4,5 HL

5,0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex

Ergänzungsprodukte31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 mm/Replace™

43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Produktkatalog – Steri-Oss™ NobelEsthetics®

34

Deu

tsch

Page 35: Dental Implants Parts

Steri-Oss™

Artikelnummer Komponenten Alte Artikelnummer

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3,25 mm2157 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex2390 PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3,25 mm HL

3,8 mm/4,5 mm2123 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Ergänzungsprodukte31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3,25 mm31548 O-Ring Abutment 2,5 mmH, 3,25 mm HL 242731549 O-Ring Abutment 4,0 mmH, 3,25 mm HL 242831711 O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2488

3,8 mm/4,5 mm31550 O-Ring Abutment 2 mmH, 3,8/4,5 HL 248231551 O-Ring Abutment 3 mmH, 3,8/4,5 HL 248331552 O-Ring Abutment 4 mmH, 3,8/4,5 HL 248431710 O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2485

Achtung: O-Ringe und Befestigungsringe müssen separat bestellt werden,

Ergänzungsprodukte2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Produktkatalog – Steri-Oss™

35

Deu

tsch

Page 36: Dental Implants Parts

Steri-Oss™

Artikelnummer Komponenten Alte Artikelnummer

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL

Ergänzungsprodukte2688 Analog Conical Abutment 3,25/3,8/4,5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3,25 Non-Hex2464 Coronal Screw Set 3,8 Non-Hex

Ergänzungsprodukte2085 Screwdriver Hex 0,050" Length 0,75"2472 Torque Wrench Insert Hex 0,050" Short

Transfer Impression Components

3,25 mm31529 Thread Timed Transfer Pin 3,25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2640

3,8/4,5 mm31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317

5,0 mm31533 Transfer Assembly Hex Open Tray, 6,0 mmD 5049

5,0 mm HL/Replace™ Hex

6,0 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace™ Hex 60701

Ergänzungsprodukte2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

Produktkatalog – Steri-Oss™ NobelEsthetics®

36

Deu

tsch

Page 37: Dental Implants Parts

VerschiedenesArtikelnummer Komponenten Alte Artikelnummer

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0,030" Length 0,75"2432 Screwdriver Hex 0,030" Length 1,25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0,050" Short2473 Torque Wrench Insert Hex 0,050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5,0 HL/Replace™ Hex35706 Implant Analog, 3,5 mm/Replace™ Hex43714 Implant Analog, 4,3 mm/Replace™ Hex2687 Implant Analog, 3,8/4,5 HL6129 Implant Analog, 6,0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3,5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4,3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5,0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3,25/3,8/4,5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3,25/3,8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3,8/4,3/4,5/5,0/6,0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3,25 HL/3,5 Replace™ Hex31707 Abutment Screw Slot 3,25 HL/3,5 Replace™ Hex 62200

NobelEsthetics® Verschiedenes

37

Deu

tsch

Page 38: Dental Implants Parts

Esp

año

l

Page 39: Dental Implants Parts

IntroducciónPiezas de recambio para los sistemas Steri-Oss™,Replace™ y Replace Select™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Healing Abutment (pilar de cicatrización) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Direct Abutment, no rotatorio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Direct Abutment, rotatorio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

PME Transmucosal Abutment (pilar PME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

O-Ring Abutment (pilar O-Ring) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Transfer Impression (cofia de impresión) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Conical Abutment Gold Coping (cofia de oro pilar cónico) . . . . . . . . . 47

Catálogo de productosReplace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48–50Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52–54Varios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Índice

Índice NobelEsthetics®

39

Esp

año

l

Page 40: Dental Implants Parts

Nobel Biocare le ofrece la gama más amplia de posi-bilidades. Como los sistemas Steri-Oss™ y Replace™

pueden sustituirse por alternativas nuevas y mejoradas,hemos ampliado nuestro servicio para proporcionarlelas piezas de recambio necesarias para mantener lasrestauraciones ya fabricadas.

DefiniciónLas piezas de recambio son componentes protésicos e instrumentos de la gama de productos de NobelBiocare fundamentales para la conservación de las restauraciones de los pacientes (demanda clínica).

Nota: No se aceptan devoluciones de productos.

Datos sobre el productoMuchas de las piezas de recambio se han modificadoo se modificarán para reflejar los mismos cambios quela gama de productos ordinarios, incluyendo etiquetasy envases nuevos. Algunos de los nombres de productose han modificado ligeramente para que coincidan conlos productos ordinarios. Estos cambios se introducengradualmente.

C&B&I™ – A new way to think... and act!

40

IntroducciónPiezas de recambio para los sistemas Steri-Oss™, Replace™ y Replace Select™

Introducción NobelEsthetics®

Esp

año

l

Page 41: Dental Implants Parts

Healing AbutmentEste dispositivo permite la formación de un cuello de tejido blando alrededor del implante.

ContraindicacionesNo debería utilizarse como soporte de una restau -ración provisional.

Recomendaciones sobre la limpieza y esterilizaciónLos dispositivos se suministran estériles. Los envasesabiertos de pilares que no han entrado en contacto conla cavidad oral de un paciente pueden limpiarse y este-rilizarse en autoclave de vapor siguiendo el pro ce di -mi ento aplicado en el hospital o la clínica.

ProcedimientoEl pilar de cicatrización Healing Abutment se conecta al implante mediante el destornillador hexagonal0,050". Antes del apriete final, compruebe con unaradiografía que el pilar está completamente asentadopara confirmar la interfase con el implante.

PrecaucionesEs fundamental retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar el pilar de cicatrización Healing Abutment. Los profesionales que utilizan los sistemas Steri-Oss™

y Replace™ deben obtener la formación y prácticasadecuadas para el nivel de tratamiento que van a pro-porcionar. Póngase en contacto con Nobel Biocarepara más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

41

NobelEsthetics® Healing Abutment

Healing Abutment

Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Healing Abutment 3,25 3,5 3 Ti-Alloy

Healing Abutment 3,8/4,5 4,3 3 Ti-Alloy

Healing Abutment 5,0 5,0 3 Ti-Alloy

Healing Abutment 6,0 6,0 3 Ti-Alloy

Productos complementarios: 0,050" Hex ScrewdriverPara ver los números de referencia, consulte las páginas 12 y 16 del catálogo de productos.

Dat

os

sob

re e

l pro

duc

to

Esp

año

l

Page 42: Dental Implants Parts

Direct Abutment, no rotatorioEste dispositivo se procesa primero en ellaboratorio. Es un pilar intraoral perma-nente que se fija al implante para una res-tauración atornillada unitaria. Tambiénpuede utilizarse para fabricar un pilar perso-nalizado para una restauración cementada.

ProcedimientoUna vez procesado el pilar Direct Abutment por ellaboratorio, se aprieta con el destornillador hexa -gonal manual 0,050". El pilar debe encajar con elhexágono externo del implante. Antes del apriete a 35 Ncm, compruebe con una radiografía que el

pilar está completamente asentado para confirmarla interfase con el implante.

PrecaucionesEs fundamental retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar elpilar Direct Abutment. Los profesionales que utilizanlos sistemas Steri-Oss™ y Replace™ deben obtener laformación y prácticas adecuadas para el nivel de tra-tamiento que van a proporcionar. Póngase en con-tacto con Nobel Biocare para obtener informaciónadicional.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

Composición química Intervalo de fusión Coeficiente de expansión térmica

Elemento % por pesoAu 60 1400 – 1,490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Recomendaciones de colado para las aleaciones: Aleaciones de adhesión a cerámica: Aleaciones de alto contenido en oro (mín. 75% Au), norma ISO/DIS9693, NIOM tipo A.Aleaciones de oro convencionales: Alto contenido en oro (mín. 75% Au + metal Pt), norma ISO 1562 tipo 4.

Se recomienda la utilización del soldador a una temperatura alrededor de 800 °C.

42

Direct Abutment, Engaging

Oro/plástico Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Engaging 3,8/4,5 4,3 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)D

ato

s so

bre

el p

rod

ucto

Direct Abutment, Hexed NobelEsthetics®

Plástico Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment 3,25 3,5 10 Plástico

Engaging 3,8/4,5 4,3 10 Plástico

Plástico 5,0 5,0 10 Plásticoincluye TorqTite™ Screw 6,0 6,0 10 Plástico

Productos complementarios: Open Tray Transfer Assembly, Implant Analog, 0,050" Hex Driver, Polishing CapPara ver los números de referencia, consulte las páginas 12 y 16 del catálogo de productos.

Esp

año

l

Page 43: Dental Implants Parts

Direct Abutment, Non-Engaging

Direct Abutment, rotatorioEste dispositivo se procesa primero en el laboratorio.Es un pilar intraoral permanente que se fija al implanteen restauraciones ferulizadas, múltiples y atornilladas.

ProcedimientoUna vez procesada la restauración/estructura ferulizada,se coloca y se aprieta con el destornillador hexagonalmanual 0,050". Antes del apriete a 35 Ncm, compruebecon una radiografía que el pilar está completamente

asentado para confirmar la interfase con el implante y el ajuste pasivo.

PrecaucionesEs fundamental retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar el pilar. Los profesionales que utilizan los sistemas Steri-Oss™

y Replace™ deben obtener la formación y prácticasadecuadas para el nivel de tratamiento que van a pro-porcionar. Póngase en contacto con Nobel Biocarepara más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Non-Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Non-Engaging 4,3 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Non-Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Direct Abutment, Non-Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleeveincluye TorqTite™ Screw Ti-Alloy TorqTite™ (tornillo)

Composición química Intervalo de fusión Coeficiente de expansión térmica

Elemento % por pesoAu 60 1400 – 1,490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Aleaciones de colado recomendadas: Aleaciones de adhesión a cerámica: Aleaciones de alto contenido en oro (mín. 75% Au), norma ISO/DIS9693, NIOM tipo A.Aleaciones de oro convencionales: Alto contenido en oro (mín. 75% Au + metal Pt), norma ISO 1562 tipo 4.

Se recomienda que el trabajo de soldadura se realice en el rango de 800 °C.

Productos complementarios: Open Tray Transfer Assembly, Implant Analog, 0,050" Hex Driver, Polishing CapPara ver los números de referencia, consulte las páginas 12 y 16 del catálogo de productos.

43

NobelEsthetics® Direct Abutment, Non-HexedD

ato

s so

bre

el p

rod

ucto

Esp

año

l

Page 44: Dental Implants Parts

PME Transmucosal AbutmentEste pilar se utiliza en prótesis múltiples atornilladas paraimplantes con perfil de divergencia de menos de 40°.

ContraindicacionesEl pilar PME Transmucosal Abutment soporta restaura-ciones unitarias.

Recomendaciones sobre la limpieza y esterilizaciónLos dispositivos se suministran estériles. Los envasesabiertos de pilares que no han entrado en contactocon la cavidad oral de un paciente pueden limpiarse y esterilizarse en autoclave de vapor siguiendo losprotocolos establecidos para productos similares delhospital o la clínica.

ProcedimientoColoque el pilar PME Transmucosal Abutment con la llave Transmucosal Abutment Wrench. Compruebecon una radiografía que el pilar está completamenteasentado para confirmar la interfase con el implante.Para finalizar, apriete con la llave de torque a 35 Ncme introduzca el pilar Transmucosal Abutment. Aprietela restauración en los pilares PME Abutments concilindros de pilar a un torque de 35 Ncm.

PrecaucionesEs fundamental retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar elpilar PME Transmucosal Abutment. Tenga en cuentaque la llave de torque no se puede utilizar para ajustarla tapa de cicatrización de titanio sobre el pilar antesde la provisionalización. Los profesionales que utilizanlos sistemas Steri-Oss™ y Replace™ deben obtener laformación y prácticas adecuadas para el nivel de trata-miento que van a proporcionar. Póngase en contactocon Nobel Biocare para más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

PME Transmucosal Abutment

Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Altura (mm) Implant (mm) Altura (mm)

PME Transmucosal Abutment 3,25 3,75, 5 3,5 3,5, 4,5, 5,5 Ti-Alloy (pilar)incluye healing cap Ti-Alloy coping screw

PME Transmucosal Abutment 3,8/4,5 3,4,5 4,3 3,25, 4,25, Ti-Alloy (pilar)incluye healing cap 5,25 Ti-Alloy coping screw

PME Transmucosal Abutment 5,0 3,25, 4,25, 5,0 3,25, 4,25, Ti-Alloy (pilar)incluye healing cap 5,25 5,25 Ti-Alloy coping screw

Steri-Oss™ Steri-Oss™ Replace ReplaceNon-Hex Non-Hex Select™ Select™ Material

Implant (mm) Altura (mm) Implant (mm) Altura (mm)

PME Transmucosal Abutment 3,25 3 3,5 2,3,4,5 Ti-Alloy (pilar)incluye healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 3,8 2,3,4 4,3 2,3,4,5 Ti-Alloy (pilar)incluye healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 5,0 2,3,4,5 Ti-Alloy (pilar)incluye healing cap screw Ti-Alloy coping screw

Productos complementarios: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, HexedCoping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench, Torque Wrench Insert, Transmucosal Abutment. Para ver los números de referencia, consulte las páginas 13, 15 y 17 del catálogo de productos.

Dat

os

sob

re e

l pro

duc

toPME Transmucosal Abutment NobelEsthetics®

44

Esp

año

l

Page 45: Dental Implants Parts

O-Ring AbutmentSe trata de un pilar permanente intraoral conectadoal implante y en el que se fija una sobredentaduraimplanto mucosoportada, normalmente con dos omás implantes relativamente paralelos (<10°).

ContraindicacionesEl pilar O-Ring Abutment soporta restauraciones unita-rias y/o implantes con menos de 13 mm de longitud.

Recomendaciones sobre la limpieza y esterilizaciónLos dispositivos se suministran estériles. Los envasesabiertos de pilares que no han entrado en contacto con la cavidad oral de un paciente pueden limpiarse y esterilizarse en autoclave de vapor siguiendo losprotocolos establecidos para productos similares delhospital o la clínica.

ProcedimientoColoque el pilar O-Ring Abutment. Compruebe conuna radiografía que el pilar está completamente asenta-do para confirmar la interfase con el implante. Aprietea 35 Ncm. Tome una impresión directamente sobre elpilar O-Ring Abutment y envíela al laboratorio. En casonecesario, rebase la dentadura en la zona del pilar.Coloque la dentadura y compruebe la oclusión.

PrecaucionesEs fundamental retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar el pilar O-Ring Abutment. Los profesionales que utilizan los sistemas Steri-Oss™

y Replace™ deben obtener la formación y prácticasadecuadas para el nivel de tratamiento que van a pro-porcionar. Póngase en contacto con Nobel Biocarepara más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

Dat

os

sob

re e

l pro

duc

to Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

O-Ring Abutment 3,25 3,5 2,5, 4 Ti-Alloy (pilar)

O-Ring Abutment 3,8/4,5 4,3 2,3,4* Ti-Alloy (pilar)

O-Ring Abutment 5,0 2 Ti-Alloy (pilar)

*4 mm sólo disponibles para 3,8 /4,5

Steri-Oss™ Non-Hex Steri-Oss™ Non-Hex MaterialImplant (mm) Altura (mm)

O-Ring Abutment 3,8 2 Ti-Alloy

O-Ring Abutment 3,25 2 Ti-Alloy

Productos complementarios: O-Ring Abutment Analog y Spacer, White Clinical O-Rings, Retainer Rings

Nota: O-Rings y Retainer Rings deben adquirirse por separado.Para ver los números de referencia, consulte las páginas 14 y 17 del catálogo de productos.

NobelEsthetics® O-Ring Abutment

45

O-Ring Abutment

Esp

año

l

Page 46: Dental Implants Parts

Transfer ImpressionEste dispositivo se utiliza cuando la ubicación o angu-lación del hexágono o la cámara interna del implantese va a transferir a un modelo de diagnóstico. La impre-sión del implante proporcionará al laboratorio unmodelo de trabajo del implante.

ContraindicacionesLa cofia de impresión Transfer Impression no debeutilizarse como un pilar provisional.

ProcedimientoColoque el conjunto Open-Tray Transfer Assemblyadecuado sobre el implante y apriete con el destorni-llador 0,050" hex driver. Compruebe con una radio-

grafía que el pilar está completamente asentado paraconfirmar la inter fase con el implante. Registre unaimpresión utilizando una bandeja con una ventanaencima del conjunto. El tornillo protésico debe sobre-salir a través de la apertura de la cubeta de impresión y ser claramente visible. Una vez que el material hayafraguado, afloje la impresión y retírela.

PrecaucionesEs obligatorio retirar todos los restos de tejido y dehueso de la interfase del implante antes de colocar la cofia de impresión Transfer Impression.Los profesionales que utilizan los sistemas Steri-Oss™

y Replace™ deben obtener la formación y prácticasadecuadas para el nivel de tratamiento que van a pro-porcionar. Póngase en contacto con Nobel Biocarepara más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

Transfer Impression

Steri-Oss™

Non-Hex Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Implant (mm) (mm) Implant (mm) (mm)

Transfer Impression 3,25 4,5 3,5 3,5 Ti-AlloyComponents – Open Tray

Transfer Impression 3,8/4,5 4,5 4,3 4,5 Ti-AlloyComponents – Open Tray

Transfer Impression 5,0 6,0 5,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 6,0 6,0 6,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 3,25 Ti-AlloyComponents – Open Tray

Productos complementarios: 0,050" Hex ScrewdriverPara ver los números de referencia, consulte las páginas 14 y 18 del catálogo de productos.

Dat

os

sob

re e

l pro

duc

toTransfer Impression NobelEsthetics®

46

Esp

año

l

Page 47: Dental Implants Parts

Conical Abutment Gold CopingLas cofias se incorporan a la restauración protésicafinal mediante colado o soldadura.

Los profesionales que utilizan los sistemas Steri-Oss™

y Replace™ deben obtener la formación y prácticasadecuadas para el nivel de tratamiento que van a pro-porcionar. Póngase en contacto con Nobel Biocarepara obtener más información.

Nota: En caso de no utilizar componentes o instrumentosoriginales de Nobel Biocare, no se admiten reclamacionesrelativas a la seguridad o eficacia de los mismos. Ello puedeanular o invalidar las garantías de Nobel Biocare.

Conical Abutment Gold Coping

Composición química Intervalo de fusión Coeficiente de expansión térmica

Elemento % por pesoAu 60 1400 – 1,490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Aleaciones de colado recomendadas: Aleaciones de adhesión a cerámica: Aleaciones de alto contenido en oro (mín. 75% Au), norma ISO/DIS9693, NIOM tipo A.Aleaciones de oro convencionales: Alto contenido en oro (mín. 75% Au + metal Pt), norma ISO 1562 tipo 4.

Se recomienda que el trabajo de soldadura se realice en el rango de 800 °C.

Productos complementarios: 0,050" Hex Screwdriver, Analog Conical AbutmentPara ver los números de referencia, consulte la página 18 del catálogo de productos.

NobelEsthetics® Conical Abutment Gold Coping

Dat

os

sob

re e

l pro

duc

to

47

Steri-Oss™ MaterialImplant (mm)

Conical Abutment, Gold Coping 3,25 Gold Alloy

Conical Abutment, Gold Coping 3,8/4,5 Gold Alloy

Esp

año

l

Page 48: Dental Implants Parts

Catálogo de productos – Replace™ External Hex NobelEsthetics®

Catálogo de productosReplace™ External Hex

Referencia Descripción Referencia antigua

Healing Abutments

35300 Healing Abutment 3,5 × 3 mm, 3,5 mm Replace™ Hex43300 Healing Abutment 4,5 × 3 mm, 4,3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5,0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6,0 mm HL/Replace™ Hex

Productos complementarios2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,5 mm35511 Direct Abutment Engaging Gold/Plastic, 3,5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3,5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace™ Hex

4,3 mm43511 Direct Abutment Engaging Gold/Plastic, 4,3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4,3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4,3 Replace™ Hex

5,0 mm5029 Direct Abutment Engaging Plastic, 5,0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6,0 HL/Replace™ Hex

Productos complementarios31532 Transfer Assembly Hex Open Tray 4,5mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 Replace™ Hex43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

48

Esp

año

l

Page 49: Dental Implants Parts

Replace™ External Hex

Referencia Descripción Referencia antigua

PME Transmucosal Abutment

3,5 mm61550 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace™ Hex61551 PME Transmucosal Abutment 4,5 mmH, 3,5 Replace™ Hex61552 PME Transmucosal Abutment 5,5 mmH, 3,5 Replace™ Hex

4,3 mm61553 PME Transmucosal Abutment 3,25 mmH, 4,3 Replace™ Hex61554 PME Transmucosal Abutment 4,25 mmH, 4,3 Replace™ Hex61555 PME Transmucosal Abutment 5,25 mmH, 4,3 Replace™ Hex

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Productos complementarios31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Catálogo de productos – Replace™ External Hex

49

Esp

año

l

Page 50: Dental Implants Parts

Replace™ External Hex

Referencia Descripción Referencia antigua

O-Ring Abutment

3,5 mm31553 O-Ring Abutment 2,5 mmH, 3,5 mm Replace™ Hex 3560131554 O-Ring Abutment 4,0 mmH, 3,5 mm Replace™ Hex 35602

4,3 mm31555 O-Ring Abutment 2 mmH, 4,3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4,3 mm Replace™ Hex 43601

5,0 mm31557 O-Ring Abutment 2 mmH, 5,0 mm Replace™ Hex 50600

Productos complementarios2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3,5 mm31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace™ Hex 35702

4,3 mm31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 43702

5,0 mm31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace™ Hex 5049

6,5 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace™ Hex 60701

Productos complementarios2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de productos – Replace™ External Hex NobelEsthetics®

50

Esp

año

l

Page 51: Dental Implants Parts

Replace Select™

Referencia Descripción Referencia antigua

PME Transmucosal Abutment

3,5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4,3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5,0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Productos complementarios31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Catálogo de productos – Replace Select™

51

Esp

año

l

Page 52: Dental Implants Parts

Steri-Oss™

Referencia Descripción Referencia antigua

Healing Abutments

3,25 mm2385 Healing Abutment 4,5 × 3 mm, 3,25 mm HL

3,8 mm/4,5 mm2213 Healing Abutment, 4,5 × 3 mm, 3,8/4,5 HL

5,0 mm5013 Healing Abutment, 6 × 3 mm, 5,0 HL/Replace™ Hex

6,0 mm6100 Healing Abutment, 6 × 3 mm, 6,0 HL/Replace™ Hex

Productos complementarios2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3,25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL2384 Direct Abutment, Engaging, Plastic 3,25 HL

3,8 mm/4,5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL2262 Direct Abutment, Engaging, Plastic, 3,8/4,5 HL

5,0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex

Productos complementarios31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 mm/Replace™

43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de productos – Steri-Oss™ NobelEsthetics®

52

Esp

año

l

Page 53: Dental Implants Parts

Steri-Oss™

Referencia Descripción Referencia antigua

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3,25 mm2157 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex2390 PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3,25 mm HL

3,8 mm/4,5 mm2123 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Productos complementarios31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3,25 mm31548 O-Ring Abutment 2,5 mmH, 3,25 mm HL 242731549 O-Ring Abutment 4,0 mmH, 3,25 mm HL 242831711 O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2488

3,8 mm/4,5 mm31550 O-Ring Abutment 2 mmH, 3,8/4,5 HL 248231551 O-Ring Abutment 3 mmH, 3,8/4,5 HL 248331552 O-Ring Abutment 4 mmH, 3,8/4,5 HL 248431710 O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2485

Nota: O-Rings y Retainer Rings deben adquirirse por separado.

Productos complementarios2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Catálogo de productos – Steri-Oss™

53

Esp

año

l

Page 54: Dental Implants Parts

Steri-Oss™

Referencia Descripción Referencia antigua

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL

Productos complementarios2688 Analog Conical Abutment 3,25/3,8/4,5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3,25 Non-Hex2464 Coronal Screw Set 3,8 Non-Hex

Productos complementarios2085 Screwdriver Hex 0,050" Length 0,75"2472 Torque Wrench Insert Hex 0,050" Short

Transfer Impression Components

3,25 mm31529 Thread Timed Transfer Pin 3,25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2640

3,8 mm/4,5 mm31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317

5,0 mm31533 Transfer Assembly Hex Open Tray, 6,0 mmD 5049

5,0 mm HL/Replace™ Hex

6,0 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace™ Hex 60701

Productos complementarios2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de productos – Steri-Oss™ NobelEsthetics®

54

Esp

año

l

Page 55: Dental Implants Parts

VariosReferencia Descripción Referencia antigua

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0,030" Length 0,75"2432 Screwdriver Hex 0,030" Length 1,25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0,050" Short2473 Torque Wrench Insert Hex 0,050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5,0 HL/Replace™ Hex35706 Implant Analog, 3,5 mm/Replace™ Hex43714 Implant Analog, 4,3 mm/Replace™ Hex2687 Implant Analog, 3,8/4,5 HL6129 Implant Analog, 6,0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3,5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4,3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5,0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3,25/3,8/4,5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3,25/3,8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3,8/4,3/4,5/5,0/6,0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3,25 HL/3,5 Replace™ Hex31707 Abutment Screw Slot 3.25 HL/3.5 Replace™ Hex 62200

NobelEsthetics® Varios

55

Esp

año

l

Page 56: Dental Implants Parts

Fran

çais

Page 57: Dental Implants Parts

IntroductionPièces de rechange pour Steri-Oss™, Replace™ et systèmes Replace Select™. . . . . . . 58

Pilier de cicatrisation Healing Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Pilier anti-rotationnel Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Pilier rotationnel Direct Abutment, Non-Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Pilier transmuqueux PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Pilier O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Empreinte de transfert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Chape en or pour pilier conique Conical Abutment Gold Coping . . . . . . . . . 65

Catalogue produitsPilier externe hexagonal Replace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66–68

Pilier Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70–72

Divers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Table des matières

Table des matières NobelEsthetics®

57

Fran

çais

Page 58: Dental Implants Parts

Aujourd’hui, plus que jamais, Nobel Biocare vous offre uneplus grande variété de produits et de services. Comme lessystèmes Steri-Oss™ et Replace™ peuvent être rempla-cés par de nouvelles solutions plus adaptées, nous élargi-rons nos services et proposerons des pièces de rechangenécessaires à l’entretien des restaurations déjà effec-tuées.

DéfinitionsLes pièces de rechange sont des instruments et compo-sants prothétiques de la gamme de produits NobelBiocare, essentiels à l’entretien des restaurations déjàeffectuées chez les patients (demande clinique).

Remarque : Aucun retour produit n’est accepté. Données sur les produitsUn bon nombre de pièces de rechange a été soumis ousera soumis aux mêmes changements que la gamme deproduits ordinaires, y compris de nouvelles étiquettes etde nouveaux conditionnements. Certains noms de pro-duits ont été légèrement modifiés pour s’harmoniser avecles produits ordinaires. Ces modifications sont introduitesprogressivement.

C&B&I™ – La nouvelle façon de penser... et d’agir !

58

IntroductionPièces de rechange pour Steri-Oss™, Replace™ et systèmes Replace Select™

Introduction NobelEsthetics®

Fran

çais

Page 59: Dental Implants Parts

Pilier de cicatrisation Healing AbutmentCe dispositif permet la formation d’un col de tissusmous autour de l’implant.

Contre-indicationsNe doit pas être utilisé pour porter une restaurationprovisoire.

Recommandations pour la stérilisation et le nettoyageLes dispositifs sont livrés stériles. Les emballages ouvertscontenant des piliers qui n’ont encore jamais été utiliséschez un patient, peuvent être nettoyés et stérilisés enautoclave conformément aux protocoles en vigueurdans les cliniques ou les hôpitaux locaux.

ProtocoleLe pilier de cicatrisation Healing Abutment est connectéà l’implant avec le tournevis hexagonal 0,050" (1 mm).Avant le serrage final, vérifier avec une radiographie que lepilier est complètement en place pour confirmer l’inter-face métallo-métallique.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser le pilierde cicatrisation. Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

59

NobelEsthetics® Pilier de cicatrisation Healing Abutment

Pilier de cicatrisation Healing Abutment

Steri-Oss™ Replace™ Hex Hauteur MatériauImplant (mm) Implant (mm) (mm)

Pilier de cicatrisation Healing Abutment 3,25 3,5 3 Alliage de titane

Pilier de cicatrisation Healing Abutment 3,8/4,5 4,3 3 Alliage de titane

Pilier de cicatrisation Healing Abutment 5,0 5,0 3 Alliage de titane

Pilier de cicatrisation Healing Abutment 6,0 6,0 3 Alliage de titane

Autres produits : Tournevis hexagonal 0,050" (1 mm)Pour les références des articles, consulter le Catalogue produits, pages 12, 16.

Do

nn

ées

sur

les

pro

dui

ts

Fran

çais

Page 60: Dental Implants Parts

Pilier anti-rotationnel DirectAbutment, EngagingCe dispositif est d’abord traité par le labora-toire. Il s’agit d’un pilier intra-oral définitiffixé sur implant pour une restauration visséeunitaire. Il peut également servir à fabriquerun pilier personnalisé pour une restaurationscellable.

ProtocoleAprès le traitement du pilier Direct Abutment par le labo-ratoire, le pilier est vissé à l’aide du tournevis hexagonalmanuel de 0,050" (1 mm). Le pilier doit être intégré àl’interface externe hexagonale de l’implant. Avant le serra-ge à 35 Ncm, vérifier avec une radiographie que le pilier

est complètement en place pour confirmer l’interfacemétallo-métallique.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser le pilierDirect Abutment. Les professionnels utilisant les systèmesSteri-Oss™ et Replace™ doivent suivre une formationappropriée pour leur niveau particulier de traitement.Contactez Nobel Biocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Composition chimique Plage de fusion Coeff. d’expansion thermique

Élément % par poidsAu 60 1400 – 1490 °C 12,4 µm/m K à 600 °CPt 19Pd 20Ir 1

Coulée recommandée sur les alliages : Alliages adhésifs céramique : Alliages à haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a.Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt métal), norme ISO 1562 type 4.

Il est recommandé d’utiliser une soudure à 800 °C.

60

Pilier anti-rotationnel Direct Abutment, Engaging

Or/plastique Steri-Oss™ Replace™ Hex Hauteur MatériauImplant (mm) Implant (mm) (mm)

Pilier anti-rotationnel 3,25 3,5 12 Alliage or/Gaine plastiqueDirect Abutment, Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier anti-rotationnel 3,8/4,5 4,3 12 Alliage or/Gaine plastiqueDirect Abutment, Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier anti-rotationnel 5,0 5,0 12 Alliage or/Gaine plastiqueDirect Abutment, Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier anti-rotationnel 6,0 6,0 12 Alliage or/Gaine plastiqueDirect Abutment, Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Do

nn

ées

sur

les

pro

dui

tsPilier Direct Abutment, Hexed NobelEsthetics®

Plastique Steri-Oss™ Replace™ Hex Hauteur MatériauImplant (mm) Implant (mm) (mm)

Direct Abutment 3,25 3,5 10 Plastique

Anti-rotationnel 3,8/4,5 4,3 10 Plastique

Plastique 5,0 5,0 10 Plastiqueinclut une vis TorqTite™ 6,0 6,0 10 Plastique

Autres produits : Ensemble de transfert pour porte-empreinte ouvert, Analogue d’implant, Tournevis hexagonal 0,050" (1 mm), Capuchon de polissagePour les références des articles, consulter le Catalogue produits, pages 12,16.

Fran

çais

Page 61: Dental Implants Parts

Pilier rotationnel Direct Abutment, Non-Engaging

Pilier rotationnel Direct Abutment,Non-EngagingCe dispositif est d’abord traité par le laboratoire. Il estdestiné à être utilisé comme pilier intra-oral à usagepermanent vissé sur l’implant pour une prothèse visséeplurale reliée.

ProtocoleAprès le traitement par le laboratoire de la restauration/structure reliée, l’ensemble est placé puis vissé à l’aide

du tournevis hexagonal manuel de 0,050" (1mm).Avant le serrage à 35 Ncm, vérifier avec une radiographieque les piliers sont complètement en place pour confirmerl’interface métallo-métallique.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser le pilier.Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Steri-Oss™ Replace™ Hex Hauteur MatériauImplant (mm) Implant (mm) (mm)

Pilier rotationnel Direct Abutment, 3,25 3,5 12 Alliage or/Gaine plastiqueNon-Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier rotationnel Direct Abutment, 4,3 12 Alliage or/Gaine plastiqueNon-Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier rotationnel Direct Abutment, 5,0 5,0 12 Alliage or/Gaine plastiqueNon-Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Pilier rotationnel Direct Abutment, 6,0 6,0 12 Alliage or/Gaine plastiqueNon-Engaging Alliage titane TorqTite™ (vis)inclut une vis TorqTite™

Composition chimique Plage de fusion Coeff. d’expansion thermique

Élément % par poidsAu 60 1400 – 1490 °C 12,4 µm/m K à 600 °CPt 19Pd 20Ir 1

Coulée recommandée sur les alliages : Alliages adhésifs céramique : Alliages à haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a.Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt métal), norme ISO 1562 type 4.

Il est recommandé d’utiliser une soudure à 800 °C.

Autres produits : Ensemble de transfert pour porte-empreinte ouvert, Analogue d’implant, Tournevis hexagonal 0,050" (1 mm), Capuchon de polissagePour les références des articles, consulter le Catalogue produits, pages 12,16.

61

NobelEsthetics® Pilier non hexagonal Direct Abutment, Non-Hexed

Do

nn

ées

sur

les

pro

dui

ts

Fran

çais

Page 62: Dental Implants Parts

Pilier transmuqueux PME TransmucosalAbutmentCe pilier est utilisé pour une prothèse vissée pluralepour un implant ayant un profil de divergence demoins de 40°.

Contre-indicationsLe pilier transmuqueux PME Transmucosal Abutmentest compatible avec les restaurations unitaires.

Recommandations pour la stérilisation et le nettoyageLes dispositifs sont livrés stériles. Les emballages ouvertscontenant des piliers qui n’ont encore jamais été utiliséschez un patient, peuvent être nettoyés et stérilisés enautoclave conformément aux protocoles en vigueur dansles cliniques ou les hôpitaux locaux, pour des produitssimilaires.

ProtocolePlacer le pilier transmuqueux PME TransmucosalAbutment avec la clé pour pilier transmuqueuxTransmucosal Abutment Wrench. Vérifier avec uneradiographie que le pilier est complètement en placepour confirmer l’interface métallo-métallique avec l’im-plant. Finir le serrage avec la clé à torque à 35 Ncm etavec l’insert pour pilier transmuqueux TransmucosalAbutment Insert. Visser la restauration sur les piliersPME Abutments avec les vis de chapes à un couple d’insertion de 35 Ncm.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser le pilier transmuqueux PME Transmucosal Abutment. Ilconvient de remarquer que la clé à torque ne peut pasêtre utilisée pour visser le capuchon de cicatrisation-titane placé au-dessus du pilier avant la temporisation.Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Pilier transmuqueux PME Transmucosal Abutment

Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MatériauImplant(mm) Hauteur(mm) Implant(mm) Hauteur(mm)

Pilier transmuqueux PME 3,25 3,75, 5 3,5 3,5, 4,5, 5,5 Alliage de titane (pilier)Transmucosal Abutment Vis de chape alliage titaneinclut un capuchon de cicatrisation

Pilier transmuqueux PME 3,8/4,5 3,4,5 4,3 3,25, 4,25, Alliage de titane (pilier)Transmucosal Abutment 5,25 Vis de chape alliage titaneinclut un capuchon de cicatrisation

Pilier transmuqueux PME 5,0 3,25, 4,25, 5,25 5,0 3,25, 4,25, Alliage de titane (pilier)Transmucosal Abutment 5,25 Vis de chape alliage titaneinclut un capuchon de cicatrisation

Steri-Oss™ Steri-Oss™ Replace™ Replace™ MatériauNon-Hex Non-Hex Sélectionnez Sélectionnez

Implant(mm) Hauteur(mm) Implant(mm) Hauteur(mm)

Pilier transmuqueux PME 3,25 3 3,5 2,3,4,5 Alliage de titane (pilier)Transmucosal Abutment Vis de chape alliage titaneinclut une vis de capuchon de cicatrisation

Pilier transmuqueux PME 3,8 2,3,4 4,3 2,3,4,5 Alliage de titane (pilier)Transmucosal Abutment Vis de chape alliage titaneinclut une vis de capuchon de cicatrisation

Pilier transmuqueux PME 5,0 2,3,4,5 Alliage de titane (pilier)Transmucosal Abutment Vis de chape alliage titaneinclut une vis de capuchon de cicatrisation

Autres produits : Transfert d’empreinte pour technique porte-empreinte ouvert, analogue de pilier PME Abutment Analog, chape PMECoping, Vis de chape or/plastique Gold Plastic, Hexed Coping Transmucosal Screws, Vis de chape fendues Slotted Coping Screws, Chapeprovisoire PME Temporary Coping, clé pour pilier transmuqueux Transmucosal Abutment Wrench, Insert de clé à torque Torque WrenchInsert, pilier transmuqueux Transmucosal Abutment. Pour les références des articles, consulter le Catalogue produits, pages 13,15,17.

Do

nn

ées

sur

les

pro

dui

tsPilier transmuqueux PME Transmucosal Abutment NobelEsthetics®

62

Fran

çais

Page 63: Dental Implants Parts

Pilier O-Ring AbutmentIl s’agit d’un pilier intra-oral à usage permanent vissé surl’implant pour prothèses adjointes supra-implantaires àappui implantaire, typiquement avec au moins deuximplants relativement parallèles (<10°).

Contre-indicationsLe pilier O-Ring Abutment est compatible avec des restau-rations unitaires et/ou des implants de moins de 13 mmde longueur.

Recommandations pour la stérilisation et le nettoyageLes dispositifs sont livrés stériles. Les emballages ouvertscontenant des piliers qui n’ont encore jamais été utiliséschez un patient, peuvent être nettoyés et stérilisés enautoclave conformément aux protocoles en vigueur dansles cliniques ou les hôpitaux locaux, pour des produitssimilaires.

ProtocolePlacer le pilier O-Ring Abutment. Vérifier avec uneradiographie que le pilier est complètement en placepour confirmer l’interface métallo-métallique. Visser à35 Ncm. Prendre une empreinte directement au-dessusdu pilier O-Ring Abutment et l’envoyer au laboratoire.Dégager le dentier au-dessus du pilier si nécessaire.Placer le dentier et vérifier l’occlusion.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser le pilierO-Ring Abutment. Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Do

nn

ées

sur

les

pro

dui

ts Steri-Oss™ Replace™ Hex Hauteur MatériauImplant (mm) Implant (mm) (mm)

Pilier O-Ring Abutment 3,25 3,5 2,5,4 Alliage de titane (pilier)

Pilier O-Ring Abutment 3,8/4,5 4,3 2,3,4* Alliage de titane (pilier)

Pilier O-Ring Abutment 5,0 2 Alliage de titane (pilier)

*4 mm seulement disponible pour 3,8 /4,5

Steri-Oss™ Non-Hex Steri-Oss™ Non-Hex MatériauImplant (mm) Hauteur (mm)

Pilier O-Ring Abutment 3,8 2 Alliage de titane

Pilier O-Ring Abutment 3,25 2 Alliage de titane

Autres produits : Analogue de pilier et espaceur O-Ring Abutment Analog and Spacer, White Clinical O-Rings, Retainer Rings

Remarque : Les O-rings et Retainer Rings doivent être achetés séparément.Pour les références des articles, consulter le Catalogue produits, pages 14,17.

NobelEsthetics® Pilier O-Ring Abutment

63

Pilier O-Ring Abutment

Fran

çais

Page 64: Dental Implants Parts

Empreinte de transfertCe dispositif est utilisé lorsque l’emplacement, l’angulationdu pan hexagonal ou de la chambre interne de l’implantdoivent être transférés sur un modèle diagnostique.L’empreinte de l’implant donnera au laboratoire unmodèle de travail de l’implant.

Contre-indicationsL’empreinte de transfert ne doit pas être utilisée commepilier provisoire.

ProtocolePlacer l’ensemble approprié pour porte-empreinte ouvertOpen-Tray Transfer Assembly au-dessus de l’implant et

visser avec le tournevis hexagonal de 0,050" (1 mm).Vérifier avec une radiographie que le pilier est complète-ment en place pour confirmer l’interface métallo-métal-lique. Prendre une empreinte avec un porte-empreintecomportant une ouverture au-dessus de l’ensemble. Lavis de fixation doit émerger à travers l’ouverture duporte-empreinte et doit être clairement visible. Aprèsdurcissement du matériau, libérer et retirer l’empreinte.

PrécautionsIl est impératif d’éliminer tous les tissus et fragmentsosseux de l’interface implantaire avant de poser l’em-preinte de transfert.Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Empreinte de transfert

Steri-Oss™

Non-Hex Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MatériauImplant (mm) Implant (mm) (mm) Implant (mm) (mm)

Empreinte de transfert 3,25 4,5 3,5 3,5 Alliage de titaneComposants – Porte-empreinte ouvert

Empreinte de transfert 3,8/4,5 4,5 4,3 4,5 Alliage de titaneComposants – Porte-empreinte ouvert

Empreinte de transfert 5,0 6,0 5,0 6,0 Alliage de titaneComposants – Porte-empreinte ouvert

Empreinte de transfert 6,0 6,0 6,0 6,0 Alliage de titaneComposants – Porte-empreinte ouvert

Empreinte de transfert 3,25 Alliage de titaneComposants – Porte-empreinte ouvert

Autres produits : Tournevis hexagonal 0,050" (1 mm)Pour les références des articles, consulter le Catalogue produits, pages 14,18.

Do

nn

ées

sur

les

pro

dui

tsEmpreinte de transfert NobelEsthetics®

64

Fran

çais

Page 65: Dental Implants Parts

Chape en or pour pilier conique ConicalAbutment Gold CopingLes chapes sont intégrées dans la restauration prothétiquedéfinitive par coulée lors de l’intervention ou soudure.

Les professionnels utilisant les systèmes Steri-Oss™ etReplace™ doivent suivre une formation appropriée pourleur niveau particulier de traitement. Contactez NobelBiocare pour plus d’informations.

Remarque : En cas d’utilisation de composants/instrumentsnon originaux (non Nobel Biocare), aucune réclamation nepeut être déposée quant à leur sécurité et leur efficacité. Lesgaranties liées à Nobel Biocare peuvent alors être annulées.

Chape en or pour pilier conique Conical Abutment Gold Coping

Composition chimique Plage de fusion Coeff. d’expansion thermique

Élément % par poidsAu 60 1400 – 1490 °C 12,4 µm/m K à 600 °CPt 19Pd 20Ir 1

Coulée recommandée sur les alliages : Alliages adhésifs céramique : Alliages à haute teneur en or (min 75 % Au), norme ISO/DIS9693, NIOM type a.Alliages traditionnels en or : Haute teneur en or (min 75% Au + Pt métal), norme ISO 1562 type 4.

Il est recommandé d’utiliser une soudure à 800 °C.

Autres produits : Tournevis hexagonal 0,050" Hex Screwdriver, analogue de pilier conique Analog Conical AbutmentPour les références des articles, consulter le Catalogue produits, page 18.

NobelEsthetics® Chape en or pour pilier conique Conical Abutment Gold Coping

Do

nn

ées

sur

les

pro

dui

ts

65

Steri-Oss™ MatériauImplant (mm)

Pilier conique Conical Abutment, 3,25 Alliage orChape en or Gold Coping

Pilier conique Conical Abutment, 3,8/4,5 Alliage orChape en or Gold Coping

Fran

çais

Page 66: Dental Implants Parts

Catalogue produits – Replace™ External Hex NobelEsthetics®

Catalogue produitsReplace™ External Hex

Référence Composant Ancienne référence

Healing Abutments

35300 Healing Abutment 3,5 × 3 mm, 3,5 mm Replace™ Hex43300 Healing Abutment 4,5 × 3 mm, 4,3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5,0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6,0 mm HL/Replace™ Hex

Autres produits2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,5 mm35511 Direct Abutment Engaging Gold/Plastic, 3,5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3,5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace™ Hex

4,3 mm43511 Direct Abutment Engaging Gold/Plastic, 4,3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4,3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4,3 Replace™ Hex

5,0 mm5029 Direct Abutment Engaging Plastic, 5,0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6,0 HL/Replace™ Hex

Autres produits31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 Replace™ Hex43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

66

Fran

çais

Page 67: Dental Implants Parts

Replace™ External Hex

Référence Composant Ancienne référence

PME Transmucosal Abutment

3,5 mm61550 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace™ Hex61551 PME Transmucosal Abutment 4,5 mmH, 3,5 Replace™ Hex61552 PME Transmucosal Abutment 5,5 mmH, 3,5 Replace™ Hex

4,3 mm61553 PME Transmucosal Abutment 3,25 mmH, 4,3 Replace™ Hex61554 PME Transmucosal Abutment 4,25 mmH, 4,3 Replace™ Hex61555 PME Transmucosal Abutment 5,25 mmH, 4,3 Replace™ Hex

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Autres produits31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Catalogue produits – Replace™ External Hex

67

Fran

çais

Page 68: Dental Implants Parts

Replace™ External Hex

Référence Composant Ancienne référence

O-Ring Abutment

3,5 mm31553 O-Ring Abutment 2,5 mmH, 3,5 mm Replace™ Hex 3560131554 O-Ring Abutment 4,0 mmH, 3,5 mm Replace™ Hex 35602

4,3 mm31555 O-Ring Abutment 2 mmH, 4,3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4,3 mm Replace™ Hex 43601

5,0 mm31557 O-Ring Abutment 2 mmH, 5,0 mm Replace™ Hex 50600

Autres produits2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3,5 mm31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace™ Hex 35702

4,3 mm31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 43702

5,0 mm31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace™ Hex 5049

6,5 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace™ Hex 60701

Autres produits2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catalogue produits – Replace™ External Hex NobelEsthetics®

68

Fran

çais

Page 69: Dental Implants Parts

Replace Select™

Référence Composant Ancienne référence

PME Transmucosal Abutment

3,5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4,3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5,0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Autres produits31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Catalogue produits – Replace Select™

69

Fran

çais

Page 70: Dental Implants Parts

Steri-Oss™

Référence Composant Ancienne référence

Healing Abutments

3,25 mm2385 Healing Abutment 4,5 × 3 mm, 3,25 mm HL

3,8 mm/4,5 mm2213 Healing Abutment, 4,5 × 3 mm, 3,8/4,5 HL

5,0 mm5013 Healing Abutment, 6 × 3 mm, 5,0 HL/Replace™ Hex

6,0 mm6100 Healing Abutment, 6 × 3 mm, 6,0 HL/Replace™ Hex

Autres produits2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3,25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL2384 Direct Abutment, Engaging, Plastic 3,25 HL

3,8 mm/4,5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL2262 Direct Abutment, Engaging, Plastic, 3,8/4,5 HL

5,0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex

Autres produits31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 mm/Replace™

43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catalogue produits – Steri-Oss™ NobelEsthetics®

70

Fran

çais

Page 71: Dental Implants Parts

Steri-Oss™

Référence Composant Ancienne référence

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3,25 mm2157 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex2390 PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3,25 mm HL

3,8 mm/4,5 mm2123 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Autres produits31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3,25 mm31548 O-Ring Abutment 2,5 mmH, 3,25 mm HL 242731549 O-Ring Abutment 4,0 mmH, 3,25 mm HL 242831711 O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2488

3,8 mm/4,5 mm31550 O-Ring Abutment 2 mmH, 3,8/4,5 HL 248231551 O-Ring Abutment 3 mmH, 3,8/4,5 HL 248331552 O-Ring Abutment 4 mmH, 3,8/4,5 HL 248431710 O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2485

Remarque : Les O-rings et Retainer Rings doivent être achetés séparément.

Autres produits2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Catalogue produits – Steri-Oss™

71

Fran

çais

Page 72: Dental Implants Parts

Steri-Oss™

Référence Composant Ancienne référence

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL

Autres produits2688 Analog Conical Abutment 3,25/3,8/4,5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3,25 Non-Hex2464 Coronal Screw Set 3,8 Non-Hex

Autres produits2085 Screwdriver Hex 0,050" Length 0,75"2472 Torque Wrench Insert Hex 0,050" Short

Transfer Impression Components

3,25 mm31529 Thread Timed Transfer Pin 3,25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2640

3,8/4,5 mm31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317

5,0 mm31533 Transfer Assembly Hex Open Tray, 6,0 mmD 5049

5,0 mm HL/Replace™ Hex

6,0 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace™ Hex 60701

Autres produits2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

Catalogue produits – Steri-Oss™ NobelEsthetics®

72

Fran

çais

Page 73: Dental Implants Parts

DiversRéférence Composant Ancienne référence

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0,030" Length 0,75"2432 Screwdriver Hex 0,030" Length 1,25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0,050" Short2473 Torque Wrench Insert Hex 0,050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5,0 HL/Replace™ Hex35706 Implant Analog, 3,5 mm/Replace™ Hex43714 Implant Analog, 4,3 mm/Replace™ Hex2687 Implant Analog, 3,8/4,5 HL6129 Implant Analog, 6,0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3,5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4,3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5,0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3,25/3,8/4,5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3,25/3,8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3,8/4,3/4,5/5,0/6,0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3,25 HL/3,5 Replace™ Hex31707 Abutment Screw Slot 3,25 HL/3,5 Replace™ Hex 62200

NobelEsthetics® Divers

73

Fran

çais

Page 74: Dental Implants Parts

Ital

ian

o

Page 75: Dental Implants Parts

IntroduzioneRicambi per i sistemi Steri-Oss™, Replace™ e Replace Select™ . . . . . . . . . . . . . . . . 76

Healing Abutment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Direct Abutment, Non-Engaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Transfer Impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Conical Abutment Gold Coping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Catalogo prodottiReplace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84–86Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88–90Varie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Indice

Indice NobelEsthetics®

75

Ital

ian

o

Page 76: Dental Implants Parts

Oggi, Nobel Biocare offre una scelta ancora più ampia.Poiché i sistemi Steri-Oss™ e Replace™ sono stati sosti-tuiti dalle nuove migliori alternative, abbiamo esteso inostri servizi e forniamo i ricambi necessari per mante-nere le protesi esistenti.

DefinizioniI ricambi sono componenti e strumenti protesici dellagamma di prodotti Nobel Biocare, essenziali per conser-vare le protesi già utilizzate dai pazienti (necessità clinica).

Nota: Non si accettano restituzioni dei prodotti.

Informazioni sui prodottiMolti ricambi sono stati o saranno soggetti agli stessicambiamenti della gamma di prodotti normali, compresenuove etichette e confezioni. Alcuni nomi di prodottosono stati leggermente modificati per armonizzarsi coni prodotti normali. Questi cambiamenti vengono intro-dotti gradualmente.

C&B&I™: un nuovo modo di pensare… e agire!

76

IntroduzioneRicambi per i sistemi Steri-Oss™, Replace™ e Replace Select™

Introduzione NobelEsthetics®

Ital

ian

o

Page 77: Dental Implants Parts

Healing AbutmentQuesto dispositivo consente la formazione di un collettogengivale intorno all’impianto.

ControindicazioniNon va utilizzato per sostenere una protesi provvisoria.

Raccomandazioni relative a pulizia e sterilizzazioneI dispositivi vengono forniti sterili. I componenti contenutiin confezioni aperte e non ancora inseriti nella cavità oraledi un paziente possono essere puliti e sterilizzati a vaporein autoclave, seguendo le procedure ospedaliere perprodotti simili.

ProceduraL’Healing Abutment viene collegato all’impianto utilizzan-do un Hexagon Screwdriver 0.050". Prima del serraggiofinale, verificare con una radiografia che l’abutment siacompletamente inserito, in modo da confermare l’inter-faccia metallo-metallo.

PrecauzioniPrima di inserire l’Healing Abutment, è essenziale chetutti i frammenti di osso e di tessuto vengano rimossidall’interfaccia dell’impianto. I professionisti che utilizzano i sistemi Steri-Oss™ eReplace™ dovranno ricevere una formazione e un adde-stramento appropriati allo specifico livello di trattamento.Per ulteriori informazioni, contattare Nobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

77

NobelEsthetics® Healing Abutment

Healing Abutment

Impianto Impianto Altezza MaterialeSteri-Oss™ (mm) Replace™ Hex (mm) (mm)

Healing Abutment 3,25 3,5 3 Ti-Alloy

Healing Abutment 3,8/4,5 4,3 3 Ti-Alloy

Healing Abutment 5,0 5,0 3 Ti-Alloy

Healing Abutment 6,0 6,0 3 Ti-Alloy

Prodotti supplementari: Hex Screwdriver 0,050"Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.

Info

rmaz

ion

i sui

pro

do

tti

Ital

ian

o

Page 78: Dental Implants Parts

Direct Abutment, EngagingLa preparazione iniziale di questo disposi-tivo viene effettuata in laboratorio. È unabutment intraorale permanente che vienefissato all’impianto mediante una protesiavvitata per dente singolo. Può inoltre esse-re utilizzato nella fabbricazione di abutmentpersonalizzati per protesi cementabili.

ProceduraUna volta realizzato in laboratorio, il Direct Abutmentviene fissato con il Manual Hexagon Screwdriver 0,050".L’abutment dovrà interconnettersi con l’estremità esternaesagonale dell’impianto. Prima del serraggio a 35 Ncm,verificare con una radiografia che l’abutment sia comple-

tamente inserito, in modo da confermare l’interfacciametallo-metallo.

PrecauzioniPrima di inserire il Direct Abutment, è essenziale che tuttii frammenti di osso e di tessuto vengano rimossi dall’inter-faccia dell’impianto. I professionisti che utilizzano i sistemiSteri-Oss™ e Replace™ dovranno ricevere una formazio-ne e un addestramento appropriati allo specifico livellodi trattamento. Per ulteriori informazioni, contattareNobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

Composizione chimica Intervallo di fusione Coefficiente di espansione termica

Elemento % in base al pesoAu 60 1400 – 1490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Fusioni consigliate per le leghe: Leghe per ceramica: Leghe ad alto contenuto di oro (min 75% Au), standard ISO/DIS9693, NIOM tipo A.Leghe auree convenzionali: Alto contenuto di oro (metallo min 75% Au + Pt), standard ISO 1562 tipo 4.

Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 °C.

78

Direct Abutment, Engaging

Oro/Plastica Impianto Impianto Altezza MaterialeSteri-Oss™ (mm) Replace™ Hex (mm) (mm)

Direct Abutment, Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Engaging 3,8/4,5 4,3 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Info

rmaz

ion

i sui

pro

do

tti

Direct Abutment, Engaging NobelEsthetics®

Plastica Impianto Impianto Altezza MaterialeSteri-Oss™ (mm) Replace™ Hex (mm) (mm)

Direct Abutment 3,25 3,5 10 Plastica

Engaging 3,8/4,5 4,3 10 Plastica

Plastica 5,0 5,0 10 Plasticacomprende una TorqTite™ Screw 6,0 6,0 10 Plastica

Prodotti supplementari: Open Tray Transfer Assembly, Implant Analog, Hex Driver 0,050". Polishing CapPer i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.

Ital

ian

o

Page 79: Dental Implants Parts

Direct Abutment, Non-Engaging

Direct Abutment, Non-EngagingLa preparazione iniziale di questo dispositivo vieneeffettuata in laboratorio. È un abutment intraorale permanente che viene fissato all’impianto medianteuna protesi multipla splintata.

ProceduraUna volta realizzata in laboratorio, la protesi a strutturasplintata viene inserita e fissata con il Manual Hexagon

Screwdriver 0,050". Prima del serraggio a 35 Ncm,verificare con una radiografia che tutti gli abutmentsiano completamente inseriti, in modo da confermarel’interfaccia metallo-metallo e l’adattamento passivo.

PrecauzioniPrima di inserire l’abutment, è essenziale che tutti i frammenti di osso e di tessuto vengano rimossi dall’interfaccia dell’impianto. I professionisti che utilizzano i sistemi Steri-Oss™ eReplace™ dovranno ricevere una formazione e unaddestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattareNobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

Impianto Impianto Altezza MaterialeSteri-Oss™ (mm) Replace™ Hex (mm) (mm)

Direct Abutment, Non-Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Non-Engaging 4,3 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Non-Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Direct Abutment, Non-Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleevecomprende una TorqTite™ Screw Ti-Alloy TorqTite™ (Screw)

Composizione chimica Intervallo di fusione Coefficiente di espansione termica

Elemento % in base al pesoAu 60 1400 – 1490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Fusioni consigliate per le leghe: Leghe per ceramica: Leghe ad alto contenuto di oro (min 75% Au),standard ISO/DIS9693, NIOM tipo A.Leghe auree convenzionali: Alto contenuto di oro (metallo min 75% Au + Pt), standard ISO 1562 tipo 4.

Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 °C.

Prodotti supplementari: Open Tray Transfer Assembly, Implant Analog, Hex Driver 0,050". Polishing CapPer i numeri di articolo, vedere il Catalogo prodotti alle pagine 12 e 16.

79

NobelEsthetics® Direct Abutment, Non-Engaging

Info

rmaz

ion

i sui

pro

do

tti

Ital

ian

o

Page 80: Dental Implants Parts

PME Transmucosal AbutmentQuesto abutment viene utilizzato per una protesi multiplaavvitata in un impianto dal profilo divergente inferiorea 40°.

ControindicazioniIl PME Transmucosal Abutment non supporta protesi perdenti singoli.

Raccomandazioni relative a pulizia e sterilizzazioneI dispositivi vengono forniti sterili. Gli abutment presentiin confezioni aperte e non ancora inseriti nella cavità oraledi un paziente possono essere puliti e sterilizzati a vaporein autoclave, seguendo le procedure ospedaliere perprodotti simili.

ProceduraPosizionare il PME Transmucosal Abutment con ilTransmucosal Abutment Wrench. Verificare con unaradiografia che l’abutment sia completamente inserito,in modo da confermare l’interfaccia metallo-metallo conl’impianto. Completare il serraggio con il torque wrencha 35 Ncm e con il Transmucosal Abutment Insert. Fissarela protesi sui PME Abutment mediante delle CopingScrew, utilizzando un torque di 35 Ncm.

PrecauzioniPrima di inserire il PME Transmucosal Abutment, è essen-ziale che tutti i frammenti di osso e di tessuto venganorimossi dall’interfaccia dell’impianto. Si osservi che iltorque wrench non può essere utilizzato per serrare laHealing Cap in titanio che viene applicata sull’abutmentprima del provvisorio. I professionisti che utilizzano i siste-mi Steri-Oss™ e Replace™ dovranno ricevere una forma-zione e un addestramento appropriati allo specifico livellodi trattamento. Per ulteriori informazioni, contattareNobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

PME Transmucosal Abutment

Impianto Altezza Impianto Altezza MaterialeSteri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex

(mm) (mm) (mm) (mm)

PME Transmucosal Abutment 3,25 3,75, 5 3,5 3,5, 4,5, 5,5 Ti-Alloy (abutment)comprende una Healing Cap Ti-Alloy Coping Screw

PME Transmucosal Abutment 3,8/4,5 3,4,5 4,3 3,25, 4,25, Ti-Alloy (abutment)comprende una Healing Cap 5,25 Ti-Alloy Coping Screw

PME Transmucosal Abutment 5,0 3,25, 4,25, 5,25 5,0 3,25, 4,25, Ti-Alloy (abutment)comprende una Healing Cap 5,25 Ti-Alloy Coping Screw

Impianto Altezza Impianto AltezzaSteri-Oss™ Steri-Oss™ Replace Replace Materiale

Non-Hex (mm) Non-Hex (mm) Select™ (mm) Select™ (mm)

PME Transmucosal Abutment 3,25 3 3,5 2, 3, 4,5 Ti-Alloy (abutment)comprende una Healing Cap Screw Ti-Alloy Coping Screw

PME Transmucosal Abutment 3,8 2, 3, 4 4,3 2, 3, 4, 5 Ti-Alloy (abutment)comprende una Healing Cap Screw Ti-Alloy Coping Screw

PME Transmucosal Abutment 5,0 2, 3, 4, 5 Ti-Alloy (abutment)comprende una Healing Cap Screw Ti-Alloy Coping Screw

Prodotti supplementari: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, HexedCoping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench,Torque Wrench Insert, Transmucosal Abutment. Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 13,15 e 17.

Info

rmaz

ion

i sui

pro

do

tti

PME Transmucosal Abutment NobelEsthetics®

80

Ital

ian

o

Page 81: Dental Implants Parts

O-Ring AbutmentÈ un abutment intraorale permanente, fissato all’impiantoper overdenture ritenute da impianti e supportate daltessuto, in genere con due o più impianti relativamenteparalleli (<10°).

ControindicazioniL’O-Ring Abutment non supporta protesi per denti singolie/o impianti di lunghezza inferiore a 13 mm.

Raccomandazioni relative a pulizia e sterilizzazioneI dispositivi vengono forniti sterili. Gli abutment presenti inconfezioni aperte e non ancora inseriti nella cavità oraledi un paziente possono essere puliti e sterilizzati a vaporein autoclave, seguendo le procedure ospedaliere perprodotti simili.

ProceduraPosizionare l’O-Ring Abutment Verificare con unaradiografia che l’abutment sia completamente inserito,in modo da confermare l’interfaccia metallo-metallo.Serrare a 35 Ncm. Prendere un’impronta direttamentesull’O-Ring Abutment e inviarla al laboratorio. Rimuoverela protesi dall’abutment, se necessario. Posizionare laprotesi e controllare l’occlusione.

PrecauzioniPrima di inserire l’O-Ring Abutment, è essenziale chetutti i frammenti di osso e di tessuto vengano rimossidall’interfaccia dell’impianto. I professionisti che utilizzano i sistemi Steri-Oss™ eReplace™ dovranno ricevere una formazione e un adde-stramento appropriati allo specifico livello di trattamento.Per ulteriori informazioni, contattare Nobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

Info

rmaz

ion

i sui

pro

do

tti

Impianto Impianto Altezza MaterialeSteri-Oss™ (mm) Replace™ Hex (mm) (mm)

O-Ring Abutment 3,25 3,5 2, 5, 4 Ti-Alloy (abutment)

O-Ring Abutment 3,8/4,5 4.3 2, 3, 4* Ti-Alloy (abutment)

O-Ring Abutment 5,0 2 Ti-Alloy (abutment)

*4 mm disponibili solo per i formati 3,8/4,5

Impianto Altezza MaterialeSteri-Oss™ Non-Hex (mm) Steri-Oss™ Non-Hex (mm)

O-Ring Abutment 3,8 2 Ti-Alloy

O-Ring Abutment 3,25 2 Ti-Alloy

Prodotti supplementari: O-Ring Abutment Analog e Spacer, White Clinical O-Rings, Retainer Rings

Nota: Gli O-Ring e Retainer Ring devono essere acquistati separatamente.Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 14 e 17.

NobelEsthetics® O-Ring Abutment

81

O-Ring Abutment

Ital

ian

o

Page 82: Dental Implants Parts

Transfer ImpressionQuesto dispositivo viene utilizzato quando la posizione,l’angolazione dell’esagono o la camera interna dell’im-pianto devono essere trasferiti a un modello diagnostico.L’impronta dell’impianto fornirà al laboratorio un modellodi lavoro dell’impianto.

ControindicazioniIl Transfer Impression non deve essere utilizzato comeabutment temporaneo.

ProceduraPosizionare l’appropriato Open-Tray Transfer Assemblysull’impianto e serrare con il Hex Driver 0,050". Verificarecon una radiografia che l’abutment sia completamente

inserito, in modo da confermare l’interfaccia metallo-metallo. Prendere un’impronta utilizzando un portaim-pronta e lasciare una finestra di spazio libero sui com-ponenti assemblati. La vite di fissaggio dovrà sporgeredall’apertura del portaimpronta ed essere chiaramentevisibile. Una volta posizionato il materiale, rimuovere ilportaimpronta.

PrecauzioniPrima di inserire il Transfer Impression, è essenziale chetutti i frammenti di osso e di tessuto vengano rimossidall’interfaccia dell’impianto.I professionisti che utilizzano i sistemi Steri-Oss™ eReplace™ dovranno ricevere una formazione e un adde-stramento appropriati allo specifico livello di trattamento.Per ulteriori informazioni, contattare Nobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

Transfer Impression

ImpiantoSteri-Oss™ Impianto Steri-Oss™ Impianto Replace™ Hex Materiale

Non-Hex (mm) Steri-Oss™(mm) (mm) Replace™ Hex(mm) (mm)

Transfer Impression 3,25 4,5 3,5 3,5 Ti-AlloyComponents – Open Tray

Transfer Impression 3,8/4,5 4,5 4,3 4,5 Ti-AlloyComponents – Open Tray

Transfer Impression 5,0 6,0 5,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 6,0 6,0 6,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 3,25 Ti-AlloyComponents – Open Tray

Prodotti supplementari: Hex Screwdriver 0,050";Per i numeri di articolo, vedere il Catalogo prodotti alle pagine 14 e 18.

Info

rmaz

ion

i sui

pro

do

tti

Transfer Impression NobelEsthetics®

82

Ital

ian

o

Page 83: Dental Implants Parts

Conical Abutment Gold CopingLe cappette sono incorporate nella protesi definitivamediante fusione durante la procedura o tramite saldatura.

I professionisti che utilizzano i sistemi Steri-Oss™ eReplace™ dovranno ricevere una formazione e unaddestramento appropriati allo specifico livello di trattamento. Per ulteriori informazioni, contattareNobel Biocare.

Nota: se si utilizzano componenti o strumenti non origi-nali (non realizzati da Nobel Biocare), non sarà possibileeffettuare reclami sulla sicurezza e l’efficacia dei prodotti.Di conseguenza, la garanzia fornita da Nobel Biocarepotrebbe essere invalidata.

Conical Abutment Gold Coping

Composizione chimica Intervallo di fusione Coefficiente di espansione termica

Elemento % in base al pesoAu 60 1400 – 1490 °C 12,4 µm/m K a 600 °CPt 19Pd 20Ir 1

Fusioni consigliate per le leghe: Leghe per ceramica: Leghe ad alto contenuto di oro (min 75% Au),standard ISO/DIS9693, NIOM tipo A.Leghe auree convenzionali: Alto contenuto di oro (metallo min 75% Au + Pt), standard ISO 1562 tipo 4.

Si consiglia di effettuare la saldatura entro un intervallo non superiore a 800 °C.

Prodotti supplementari: Hex Screwdriver 0,050". Analog Conical AbutmentPer i numeri di articolo, vedere il Catalogo prodotti alla pagina 18.

NobelEsthetics® Conical Abutment Gold Coping

Info

rmaz

ion

i sui

pro

do

tti

83

Impianto MaterialeSteri-Oss™ (mm)

Conical Abutment Gold Coping 3,25 Gold Alloy

Conical Abutment Gold Coping 3,8/4,5 Gold Alloy

Ital

ian

o

Page 84: Dental Implants Parts

Catalogo prodotti – Replace™ External Hex NobelEsthetics®

Catalogo ProdottiReplace™ External Hex

Numero articolo Componente Numero vecchio articolo

Healing Abutments

35300 Healing Abutment 3,5 × 3 mm, 3,5 mm Replace™ Hex43300 Healing Abutment 4,5 × 3 mm, 4,3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5,0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6,0 mm HL/Replace™ Hex

Prodotti supplementari2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,5 mm35511 Direct Abutment Engaging Gold/Plastic, 3,5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3,5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace™ Hex

4,3 mm43511 Direct Abutment Engaging Gold/Plastic, 4,3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4,3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4,3 Replace™ Hex

5,0 mm5029 Direct Abutment Engaging Plastic, 5,0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6,0 HL/Replace™ Hex

Prodotti supplementari31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 Replace™ Hex43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

84

Ital

ian

o

Page 85: Dental Implants Parts

Replace™ External Hex

Numero articolo Componente Numero vecchio articolo

PME Transmucosal Abutment

3,5 mm61550 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace™ Hex61551 PME Transmucosal Abutment 4,5 mmH, 3,5 Replace™ Hex61552 PME Transmucosal Abutment 5,5 mmH, 3,5 Replace™ Hex

4,3 mm61553 PME Transmucosal Abutment 3,25 mmH, 4,3 Replace™ Hex61554 PME Transmucosal Abutment 4,25 mmH, 4,3 Replace™ Hex61555 PME Transmucosal Abutment 5,25 mmH, 4,3 Replace™ Hex

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Prodotti supplementari31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Catalogo prodotti – Replace™ External Hex

85

Ital

ian

o

Page 86: Dental Implants Parts

Replace™ External Hex

Numero articolo Componente Numero vecchio articolo

O-Ring Abutment

3,5 mm31553 O-Ring Abutment 2,5 mmH, 3,5 mm Replace™ Hex 3560131554 O-Ring Abutment 4,0 mmH, 3,5 mm Replace™ Hex 35602

4,3 mm31555 O-Ring Abutment 2 mmH, 4,3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4,3 mm Replace™ Hex 43601

5,0 mm31557 O-Ring Abutment 2 mmH, 5,0 mm Replace™ Hex 50600

Prodotti supplementari2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3,5 mm31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace™ Hex 35702

4,3 mm31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 43702

5,0 mm31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace™ Hex 5049

6,5 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace™ Hex 60701

Prodotti supplementari2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catalogo prodotti – Replace™ External Hex NobelEsthetics®

86

Ital

ian

o

Page 87: Dental Implants Parts

Replace Select™

Numero articolo Componente Numero vecchio articolo

PME Transmucosal Abutment

3,5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4,3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5,0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Prodotti supplementari31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Catalogo prodotti – Replace Select™

87

Ital

ian

o

Page 88: Dental Implants Parts

Steri-Oss™

Numero articolo Componente Numero vecchio articolo

Healing Abutments

3,25 mm2385 Healing Abutment 4,5 × 3 mm, 3,25 mm HL

3,8 mm/4,5 mm2213 Healing Abutment, 4,5 × 3 mm, 3,8/4,5 HL

5,0 mm5013 Healing Abutment, 6 × 3 mm, 5,0 HL/Replace™ Hex

6,0 mm6100 Healing Abutment, 6 × 3 mm, 6,0 HL/Replace™ Hex

Prodotti supplementari2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3,25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL2384 Direct Abutment, Engaging, Plastic 3,25 HL

3,8 mm/4,5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL2262 Direct Abutment, Engaging, Plastic, 3,8/4,5 HL

5,0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex

Prodotti supplementari31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 mm/Replace™

43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catalogo prodotti – Steri-Oss™ NobelEsthetics®

88

Ital

ian

o

Page 89: Dental Implants Parts

Steri-Oss™

Numero articolo Componente Numero vecchio articolo

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3,25 mm2157 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex2390 PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3,25 mm HL

3,8 mm/4,5 mm2123 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Prodotti supplementari31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3,25 mm31548 O-Ring Abutment 2,5 mmH, 3,25 mm HL 242731549 O-Ring Abutment 4,0 mmH, 3,25 mm HL 242831711 O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2488

3,8 mm/4,5 mm31550 O-Ring Abutment 2 mmH, 3,8/4,5 HL 248231551 O-Ring Abutment 3 mmH, 3,8/4,5 HL 248331552 O-Ring Abutment 4 mmH, 3,8/4,5 HL 248431710 O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2485

Nota: Gli O-Ring e Retainer Ring devono essere acquistati separatamente.

Prodotti supplementari2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Catalogo prodotti – Steri-Oss™

89

Ital

ian

o

Page 90: Dental Implants Parts

Steri-Oss™

Numero articolo Componente Numero vecchio articolo

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL

Prodotti supplementari2688 Analog Conical Abutment 3,25/3,8/4,5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3,25 Non-Hex2464 Coronal Screw Set 3,8 Non-Hex

Prodotti supplementari2085 Screwdriver Hex 0,050" Length 0,75"2472 Torque Wrench Insert Hex 0,050" Short

Transfer Impression Components

3,25 mm31529 Thread Timed Transfer Pin 3,25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2640

3,8/4,5 mm31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317

5,0 mm31533 Transfer Assembly Hex Open Tray, 6,0 mmD, 5,0 mm HL/Replace™ Hex 5049

6,0 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace™ Hex 60701

Prodotti supplementari2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

Catalogo prodotti – Steri-Oss™ NobelEsthetics®

90

Ital

ian

o

Page 91: Dental Implants Parts

VarieNumero articolo Componente Numero vecchio articolo

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0,030" Length 0,75"2432 Screwdriver Hex 0,030" Length 1,25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0,050" Short2473 Torque Wrench Insert Hex 0,050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5,0 HL/Replace™ Hex35706 Implant Analog, 3,5 mm/Replace™ Hex43714 Implant Analog, 4,3 mm/Replace™ Hex2687 Implant Analog, 3,8/4,5 HL6129 Implant Analog, 6,0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3,5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4,3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5,0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3,25/3,8/4,5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3,25/3,8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3,8/4,3/4,5/5,0/6,0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3,25 HL/3,5 Replace™ Hex31707 Abutment Screw Slot 3,25 HL/3,5 Replace™ Hex 62200

NobelEsthetics® Varie

91

Ital

ian

o

Page 92: Dental Implants Parts
Page 93: Dental Implants Parts

93

94

95

96

97

98

99

100

101

102–104105

106–108109

NobelEsthetics®

Page 94: Dental Implants Parts

94

C&B&I™ – A new way to think… and act!

NobelEsthetics®

Page 95: Dental Implants Parts

95

NobelEsthetics®

Page 96: Dental Implants Parts

96

NobelEsthetics®

Page 97: Dental Implants Parts

97

NobelEsthetics®

Page 98: Dental Implants Parts

98

NobelEsthetics®

Page 99: Dental Implants Parts

999

NobelEsthetics®

Page 100: Dental Implants Parts

100

NobelEsthetics®

Page 101: Dental Implants Parts

101

NobelEsthetics®

Page 102: Dental Implants Parts

12102

NobelEsthetics®

Page 103: Dental Implants Parts

103

NobelEsthetics®

Page 104: Dental Implants Parts

104

NobelEsthetics®

Page 105: Dental Implants Parts

105

NobelEsthetics®

Page 106: Dental Implants Parts

106

NobelEsthetics®

Page 107: Dental Implants Parts

107

NobelEsthetics®

Page 108: Dental Implants Parts

18108

NobelEsthetics®

Page 109: Dental Implants Parts

19109

NobelEsthetics®

Page 110: Dental Implants Parts

Port

uguê

s

Page 111: Dental Implants Parts

IntroduçãoPeças suplentes para sistemas Steri-Oss™, Replace™ e Replace Select™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Healing Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Direct Abutment, Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Direct Abutment, Non-Engaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

PME Transmucosal Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

O-Ring Abutment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Transfer Impression. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Conical Abutment Gold Coping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Catálogo de ProdutosReplace™ External Hex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120–122Replace Select™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Steri-Oss™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124–126Diversos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Índice

Índice NobelEsthetics®

111

Port

uguê

s

Page 112: Dental Implants Parts

A Nobel Biocare oferece-lhe agora mais opções do quenunca. Como os sistemas Steri-Oss™ e Replace™

podem ser substituídos por alternativas novas e mel-horadas, vamos prolongar o nosso serviço fornecen-do-lhe as peças suplentes necessárias para manter asrestaurações existentes.

DefiniçãoPeças suplentes são instrumentos e componentesprotéticos da gama de produtos Nobel Biocareessenciais para manter as restaurações existentes nos pacientes (exigência clínica).

Nota: Não se aceitam devoluções de produtos.

Factos sobre os produtosMuitas das peças suplentes foram ou serão sujeitasàs mesmas alterações da gama de produtos conven -cionais, incluindo novos rótulos e embalagens. Algunsnomes de produtos sofreram ligeiras alterações para seharmonizarem com os produtos convencionais. Essasalterações estão a ser introduzidas gradualmente.

C&B&I™ – Uma nova forma de pensar... e agir!

112

IntroduçãoPeças suplentes para sistemas Steri-Oss™, Replace™ e Replace Select™

Introdução NobelEsthetics®

Port

uguê

s

Page 113: Dental Implants Parts

Healing AbutmentEste dispositivo permite a formação de um sulco detecido mole à volta do implante.

Contra-indicaçõesNão deve ser utilizado para suportar uma restauraçãoprovisória.

Recomendações de Limpeza e EsterilizaçãoOs dispositivos são fornecidos esterilizados. Embalagensabertas de pilares que nunca tenham sido introduzidosna cavidade oral de um paciente podem ser limpos eautoclavados a vapor, de acordo com procedimentosadoptados no hospital ou clínica local.

ProcedimentoA ligação do Healing Abutment ao implante faz-secom uma hexagon screwdriver de 0,050". Antes doaperto definitivo, verifique numa radiografia se opilar está bem encaixado para confirmar a interfacemetal-a-metal.

PrecauçõesÉ imperativo que todos os fragmentos de tecido ede osso sejam removidos da interface do implanteantes do encaixe do Healing Abutment. Os profissionais que utilizam sistemas Steri-Oss™ eReplace™ devem receber formação e treino adequadospara o seu nível de tratamento específico. Para obtermais informações, contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode - rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

113

NobelEsthetics® Healing Abutment

Healing Abutment

Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Healing Abutment 3,25 3,5 3 Ti-Alloy

Healing Abutment 3,8/4,5 4,3 3 Ti-Alloy

Healing Abutment 5,0 5,0 3 Ti-Alloy

Healing Abutment 6,0 6,0 3 Ti-Alloy

Produtos suplementares: Hex Screwdriver de 0,050". Para saber os números dos artigos, consulte as páginas 12,16 do Catálogo de Produtos.

Fact

os

sob

re o

s p

rod

uto

s

Port

uguê

s

Page 114: Dental Implants Parts

Direct Abutment, EngagingEste dispositivo é processado primeirono laboratório. Trata-se de um pilar defi-nitivo intra-oral que se fixa ao implantenuma restauração aparafusada com umsó parafuso. Também pode ser utilizadopara fabricar um pilar personalizado parauma restauração cimentável.

ProcedimentoDepois de processado no laboratório, o DirectAbutment é apertado com a hexagon screwdrivermanual de 0,050". O pilar deve ficar integrado nainterface hexagonal externa do implante. Antes doaperto a 35 Ncm, verifique numa radiografia se o

pilar está bem encaixado para confirmar a interfacemetal-a-metal.

PrecauçõesÉ imperativo que todos os fragmentos de tecido e deosso sejam removidos da interface do implante antesdo encaixe do Direct Abutment. Os profissionais queutilizam sistemas Steri-Oss™ e Replace™ devem rece-ber formação e treino adequados para o seu nível detratamento específico. Para obter mais informações,contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode -rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

Composição química Intervalo de fusão Coeficiente de expansão térmica

Elemento % por pesoAu 60 1400 – 1490 °C 12,4 µm/m K at 600 °CPt 19Pd 20Ir 1

Fusão recomendada em ligas metálicas: Ligas cerâmicas adesivas: Ligas com alto teor de ouro (mín 75% Au), standard ISO/DIS9693, NIOM tipo a.Ligas em ouro convencionais: Alto teor de ouro (mín 75% Au + Pt metal),standard ISO 1562 tipo 4.

Recomendada soldadura a 800 °C.

114

Direct Abutment, Engaging

Ouro/Plástico Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 3,8/4,5 4,3 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)Fa

cto

s so

bre

os

pro

dut

os

Direct Abutment, Hexed NobelEsthetics®

Plástico Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment 3,25 3,5 10 Plástico

Engaging 3,8/4,5 4,3 10 Plástico

Plástico 5,0 5,0 10 Plásticoinclui um TorqTite™ Screw 6,0 6,0 10 Plástico

Produtos suplementares: Open Tray Transfer Assembly, Implant Analog, 0,050", Hex Driver, Polishing CapPara saber os números dos artigos, consulte as páginas 12,16 do Catálogo de Produtos.

Port

uguê

s

Page 115: Dental Implants Parts

Direct Abutment, Non-Engaging

Direct Abutment, Non-EngagingEste dispositivo é processado primeiro no laboratório.Trata-se de um pilar definitivo intra-oral que se fixaao implante numa restauração aparafusada, múltipla,ferulizada.

ProcedimentoDepois de processada no laboratório, a estrutura/restauração ferulizada é colocada e apertada com

a hexagon screwdriver manual de 0,050". Antes doaperto a 35 Ncm, verifique numa radiografia se todosos pilares estão bem encaixados para confirmar a inter-face metal-a-metal.

PrecauçõesÉ imperativo que todos os fragmentos de tecido ede osso sejam removidos da interface do implanteantes do encaixe do pilar. Os profissionais que utilizam sistemas Steri-Oss™ eReplace™ devem receber formação e treino adequadospara o seu nível de tratamento específico. Para obtermais informações, contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode- rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

Direct Abutment, Non-Engaging 3,25 3,5 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 4,3 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 5,0 5,0 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Direct Abutment, Non-Engaging 6,0 6,0 12 Gold Alloy/Plastic Sleeveinclui um TorqTite™ Screw Ti-Alloy TorqTite™ (screw)

Composição química Intervalo de temperaturas de fusão Coeficiente de expansão térmica

Elemento % por pesoAu 60 1400 – 1,490 °C 12,4 µm/m K at 600 °CPt 19Pd 20Ir 1

Fusão recomendada em ligas metálicas: Ligas cerâmicas adesivas: Ligas com alto teor de ouro (mín 75% Au), standard ISO/DIS9693, NIOM tipo a.Ligas em ouro convencionais: Alto teor de ouro (mín 75% Au + Pt metal),standard ISO 1562 tipo 4.

Recomendada soldadura a 800 °C.

Produtos suplementares: Open Tray Transfer Assembly, Implant Analog, 0,050", Hex Driver, Polishing CapPara saber os números dos artigos, consulte as páginas 12,16 do Catálogo de Produtos.

115

NobelEsthetics® Direct Abutment, Non-HexedFa

cto

s so

bre

os

pro

dut

os

Port

uguê

s

Page 116: Dental Implants Parts

PME Transmucosal AbutmentEste pilar utiliza-se numa prótese aparafusada, múltipla,para um implante com um perfil divergente inferiora 40°.

Contra-indicaçõesO PME Transmucosal Abutment suporta restauraçõesunitárias.

Recomendações de Limpeza e EsterilizaçãoOs dispositivos são fornecidos esterilizados. Embalagensabertas de pilares que nunca tenham sido introduzidosna cavidade oral de um paciente podem ser limpos eautoclavados a vapor, de acordo com procedimentosadoptados no hospital ou clínica local para produtossemelhantes.

ProcedimentoColoque o PME Transmucosal Abutment com aTransmucosal Abutment Wrench. Verifique numaradiografia se o pilar está bem encaixado para con-firmar a interface metal-a-metal com o implante.Termine o aperto com a torque wrench a 35 Ncm ecom o Transmucosal Abutment Insert. Fixe a restau-ração nos PME Abutments com parafusos de coifaapertados com um torque de 35 Ncm.

PrecauçõesÉ imperativo que todos os fragmentos de tecido e deosso sejam removidos da interface do implante antesdo encaixe do PME Transmucosal Abutment. A chavede torque não pode ser utilizada para apertar a tampade cicatrização de titânio colocada sobre o pilar antesda provisionalização. Os profissionais que utilizam sis-temas Steri-Oss™ e Replace™ devem receber for-mação e treino adequados para o seu nível de trata-mento específico. Para obter mais informações, con-tacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode -rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

PME Transmucosal Abutment

Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Altura (mm) Implant (mm) Altura (mm)

PME Transmucosal Abutment 3,25 3,75, 5 3,5 3,5, 4,5, 5,5 Ti-Alloy (abutment)inclui healing cap Ti-Alloy coping screw

PME Transmucosal Abutment 3,8/4,5 3,4,5 4,3 3,25, 4,25, Ti-Alloy (abutment)inclui healing cap 5,25 Ti-Alloy coping screw

PME Transmucosal Abutment 5,0 3,25, 4,25, 5,25 5,0 3,25, 4,25, Ti-Alloy (abutment)inclui healing cap 5,25 Ti-Alloy coping screw

Steri-Oss™ Steri-Oss™ Replace™ Replace™

Non-Hex Non-Hex Seleccionar Seleccionar MaterialImplant (mm) Altura (mm) Implant (mm) Altura (mm)

PME Transmucosal Abutment 3,25 3 3,5 2,3,4,5 Ti-Alloy (abutment)inclui healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 3,8 2,3,4 4,3 2,3,4,5 Ti-Alloy (abutment)inclui healing cap screw Ti-Alloy coping screw

PME Transmucosal Abutment 5,0 2,3,4,5 Ti-Alloy (abutment)inclui healing cap screw Ti-Alloy coping screw

Produtos suplementares: Impression Coping Open Tray, PME Abutment Analog, PME Coping, Gold Plastic, HexedCoping Transmucosal Screws, Slotted Coping Screws, PME Temporary Coping, Transmucosal Abutment Wrench,Torque Wrench Insert, Transmucosal Abutment. Para saber os números dos artigos, consulte as páginas 13,15,17 do Catálogo de Produtos.

Fact

os

sob

re o

s p

rod

uto

sPME Transmucosal Abutment NobelEsthetics®

116

Port

uguê

s

Page 117: Dental Implants Parts

O-Ring AbutmentTrata-se de um pilar definitivo, intra-oral, fixo aoimplante, para sobredentaduras fixadas por implantes,suportadas por tecidos, normalmente com dois oumais implantes paralelos (<10°).

Contra-indicaçõesO O-Ring Abutment suporta restaurações unitáriase/ou implantes de comprimento inferior a 13 mm.

Recomendações de Limpeza e EsterilizaçãoOs dispositivos são fornecidos esterilizados. Embalagensabertas de pilares que nunca tenham sido introduzidosna cavidade oral de um paciente podem ser limpos eautoclavados a vapor, de acordo com procedimentosadoptados no hospital ou clínica local para produtossemelhantes.

ProcedimentoColoque o O-Ring Abutment. Verifique numa radio-grafia se o pilar está bem encaixado para confirmar ainterface metal-a-metal. Aperte a 35 Ncm. Faça umaimpressão directamente sobre o O-Ring Abutment eenvie para um laboratório. Alivie a dentadura sobre opilar, se for necessário. Coloque a dentadura e verifiquea oclusão.

PrecauçõesÉ imperativo que todos os fragmentos de tecido ede osso sejam removidos da interface do implanteantes do encaixe do O-Ring Abutment. Os profissionais que utilizam sistemas Steri-Oss™ eReplace™ devem receber formação e treino adequadospara o seu nível de tratamento específico. Para obtermais informações, contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode - rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

Fact

os

sob

re o

s p

rod

uto

s

Steri-Oss™ Replace™ Hex Altura MaterialImplant (mm) Implant (mm) (mm)

O-Ring Abutment 3,25 3,5 2,5, 4 Ti-Alloy (abutment)

O-Ring Abutment 3,8/4,5 4,3 2,3,4* Ti-Alloy (abutment)

O-Ring Abutment 5,0 2 Ti-Alloy (abutment)

*4 mm disponíveis apenas para for 3,8 /4,5

Steri-Oss™ Non-Hex Steri-Oss™ Non-Hex MaterialImplant (mm) Altura (mm)

O-Ring Abutment 3,8 2 Ti-Alloy

O-Ring Abutment 3,25 2 Ti-Alloy

Produtos suplementares: O-Ring Abutment Analog e Spacer, White Clinical O-Rings, Retainer Rings

Nota: Os pilares O-Ring e Retainer Ring têm de ser adquiridos separadamente.Para saber os números dos artigos, consulte as páginas 14,17 do Catálogo de Produtos.

NobelEsthetics® O-Ring Abutment

117

O-Ring Abutment

Port

uguê

s

Page 118: Dental Implants Parts

Transfer ImpressionEste dispositivo utiliza-se quando a localização eangulação da parte hexagonal ou interna do implan- te é transferida para um modelo de diagnóstico. Aimpressão do implante fornece ao laboratório ummodelo de trabalho do implante.

Contra-indicaçõesA Transfer Impression não pode ser utilizada comopilar provisório.

ProcedimentoColoque o Open-Tray Transfer Assembly apropriadosobre o implante e aperte com o hex driver de 0,050".

Verifique numa radiografia se o pilar está bem encai-xado para confirmar a interface metal-a-metal. Registeuma impressão utilizando um tabuleiro com um corteem janela acima do conjunto. O parafuso protéticotem de sobressair através da abertura do tabuleiro deimpressão e ficar claramente visível. Depois de o mate-rial secar, solte e remova a impressão.

PrecauçõesÉ imperativo que todos os fragmentos de tecido ede osso sejam removidos da interface do implanteantes do encaixe da Transfer Impression. Os profissionais que utilizam sistemas Steri-Oss™ eReplace™ devem receber formação e treino adequadospara o seu nível de tratamento específico. Para obtermais informações, contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode- rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

Transfer Impression

Steri-Oss™

Non-Hex Steri-Oss™ Steri-Oss™ Replace™ Hex Replace™ Hex MaterialImplant (mm) Implant (mm) (mm) Implant (mm) (mm)

Transfer Impression 3,25 4,5 3,5 3,5 Ti-AlloyComponents – Open Tray

Transfer Impression 3,8/4,5 4,5 4,3 4,5 Ti-AlloyComponents – Open Tray

Transfer Impression 5,0 6,0 5,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 6,0 6,0 6,0 6,0 Ti-AlloyComponents – Open Tray

Transfer Impression 3,25 Ti-AlloyComponents – Open Tray

Produtos suplementares: Hex Screwdriver de 0,050". Para saber os números dos artigos, consulte as páginas 14,18 do Catálogo de Produtos.

Fact

os

sob

re o

s p

rod

uto

sTransfer Impression NobelEsthetics®

118

Port

uguê

s

Page 119: Dental Implants Parts

Conical Abutment Gold CopingAs coifas são incorporadas na restauração protéticadefinitiva através de fusão ou soldadura.

Os profissionais que utilizam sistemas Steri-Oss™ eReplace™ devem receber formação e treino adequadospara o seu nível de tratamento específico. Para obtermais informações, contacte a Nobel Biocare.

Nota: Se forem utilizados componentes/instrumentos nãooriginais (não da Nobel Biocare), nenhuma reclamação pode-rá ser feita quanto à sua segurança e eficácia. As garantiasrelativas a produtos Nobel Biocare podem ser consideradasnulas e inválidas.

Conical Abutment Gold Coping

Composição química Intervalo de fusão Coeficiente de expansão térmica

Elemento % por pesoAu 60 1400 – 1,490 °C 12,4 µm/m K at 600 °CPt 19Pd 20Ir 1

Fusão recomendada em ligas metálicas: Ligas cerâmicas adesivas: Ligas com alto teor de ouro (mín 75% Au), standard ISO/DIS9693, NIOM tipo a.Ligas em ouro convencionais: Alto teor de ouro (mín 75% Au + Pt metal),standard ISO 1562 tipo 4.

Recomendada soldadura a 800 °C.

Produtos suplementares: Hex Screwdriver de 0,050", Analog Conical AbutmentPara saber os números dos artigos, consulte a página 18 do Catálogo de Produtos.

NobelEsthetics® Conical Abutment Gold Coping

Fact

os

sob

re o

s p

rod

uto

s

119

Steri-Oss™ MaterialImplant (mm)

Conical Abutment, Gold Coping 3,25 Gold Alloy

Conical Abutment, Gold Coping 3,8/4,5 Gold Alloy

Port

uguê

s

Page 120: Dental Implants Parts

Catálogo de produtos – Replace™ External Hex NobelEsthetics®

Catálogo de ProdutosReplace™ External Hex

Número do artigo Componente Número do artigo antigo

Healing Abutments

35300 Healing Abutment 3,5 × 3 mm, 3,5 mm Replace™ Hex43300 Healing Abutment 4,5 × 3 mm, 4,3 mm Replace™ Hex5013 Healing Abutment 6 × 3 mm, 5,0 mm HL/Replace™ Hex6100 Healing Abutment 6 × 3 mm, 6,0 mm HL/Replace™ Hex

Produtos suplementares2085 Screwdriver Hex 0,050" Length 0,7" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,5 mm35511 Direct Abutment Engaging Gold/Plastic, 3,5 Replace™ Hex35512 Direct Abutment Engaging Plastic, 3,5 Replace™ Hex35513 Direct Abutment Non-Engaging Gold/Plastic, 3,5 Replace™ Hex

4,3 mm43511 Direct Abutment Engaging Gold/Plastic, 4,3 Replace™ Hex 43512 Direct Abutment Engaging Plastic, 4,3 Replace™ Hex 43513 Direct Abutment Non-Engaging Gold/Plastic, 4,3 Replace™ Hex

5,0 mm5029 Direct Abutment Engaging Plastic, 5,0 HL/Replace™ Hex5100 Direct Abutment Engaging Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment Non-Engaging Gold/Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging Plastic, 6,0 HL/Replace™ Hex

Produtos suplementares31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 Replace™ Hex43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

120

Port

uguê

s

Page 121: Dental Implants Parts

Replace™ External Hex

Número do artigo Componente Número do artigo antigo

PME Transmucosal Abutment

3,5 mm61550 PME Transmucosal Abutment 3,5 mmH, 3,5 Replace™ Hex61551 PME Transmucosal Abutment 4,5 mmH, 3,5 Replace™ Hex61552 PME Transmucosal Abutment 5,5 mmH, 3,5 Replace™ Hex

4,3 mm61553 PME Transmucosal Abutment 3,25 mmH, 4,3 Replace™ Hex61554 PME Transmucosal Abutment 4,25 mmH, 4,3 Replace™ Hex61555 PME Transmucosal Abutment 5,25 mmH, 4,3 Replace™ Hex

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Produtos suplementares31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

NobelEsthetics® Catálogo de produtos – Replace™ External Hex

121

Port

uguê

s

Page 122: Dental Implants Parts

Replace™ External Hex

Número do artigo Componente Número do artigo antigo

O-Ring Abutment

3,5 mm31553 O-Ring Abutment 2,5 mmH, 3,5 mm Replace™ Hex 3560131554 O-Ring Abutment 4,0 mmH, 3,5 mm Replace™ Hex 35602

4,3 mm31555 O-Ring Abutment 2 mmH, 4,3 mm Replace™ Hex 4360031556 O-Ring Abutment 3 mmH, 4,3 mm Replace™ Hex 43601

5,0 mm31557 O-Ring Abutment 2 mmH, 5,0 mm Replace™ Hex 50600

Produtos suplementares2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retaining Ring 2/pkg

Transfer Impression Components

3,5 mm31531 Transfer Assembly Hex Open Tray 3,5 mmD, 3,5 Replace™ Hex 35702

4,3 mm31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 43702

5,0 mm31533 Transfer Assembly Hex Open Tray 6,0 mmD, 5,0 HL/Replace™ Hex 5049

6,5 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD, 6,0 HL/Replace™ Hex 60701

Produtos suplementares2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de produtos – Replace™ External Hex NobelEsthetics®

122

Port

uguê

s

Page 123: Dental Implants Parts

Replace Select™

Número do artigo Componente Número do artigo antigo

PME Transmucosal Abutment

3,5 mm61120 PME Transmucosal Abutment Select NP 2 mm61158 PME Transmucosal Abutment Select NP 3 mm61159 PME Transmucosal Abutment Select NP 4 mm61160 PME Transmucosal Abutment Select NP 5 mm

4,3 mm61128 PME Transmucosal Abutment Select RP 2 mm61161 PME Transmucosal Abutment Select RP 3 mm61162 PME Transmucosal Abutment Select RP 4 mm61163 PME Transmucosal Abutment Select RP 5 mm

5,0 mm61946 PME Transmucosal Abutment Select WP 2 mm61947 PME Transmucosal Abutment Select WP 3 mm61948 PME Transmucosal Abutment Select WP 4 mm61949 PME Transmucosal Abutment Select WP 5 mm

Produtos suplementares31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 2122

NobelEsthetics® Catálogo de produtos – Replace Select™

123

Port

uguê

s

Page 124: Dental Implants Parts

Steri-Oss™

Número do artigo Componente Número do artigo antigo

Healing Abutments

3,25 mm2385 Healing Abutment 4,5 × 3 mm, 3,25 mm HL

3,8 mm/4,5 mm2213 Healing Abutment, 4,5 × 3 mm, 3,8/4,5 HL

5,0 mm5013 Healing Abutment, 6 × 3 mm, 5,0 HL/Replace™ Hex

6,0 mm6100 Healing Abutment, 6 × 3 mm, 6,0 HL/Replace™ Hex

Produtos suplementares2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Direct Abutment

3,25 mm2381 Direct Abutment, Engaging, Gold/Plastic 3,25 HL2382 Direct Abutment, Non-Engaging, Gold/Plastic 3,25 HL2384 Direct Abutment, Engaging, Plastic 3,25 HL

3,8 mm/4,5 mm2284 Direct Abutment, Engaging, Gold/Plastic, 3,8/4,5 HL2262 Direct Abutment, Engaging, Plastic, 3,8/4,5 HL

5,0 mm5100 Direct Abutment, Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5101 Direct Abutment, Non-Engaging, Gold/Plastic, 5,0 HL/Replace™ Hex5029 Direct Abutment, Engaging, Plastic, 5,0 HL/Replace™ Hex

6,0 mm6105 Direct Abutment Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex6107 Direct Abutment Engaging, Plastic, 6,0 HL/Replace™ Hex6106 Direct Abutment Non-Engaging, Gold/Plastic, 6,0 HL/Replace™ Hex

Produtos suplementares31532 Transfer Assembly Hex Open Tray 4,5 mmD, 4,3 Replace™ Hex 4370243714 Implant Analog 4,3 mm/Replace™

43708 Polishing Cap Implant 4,3 Replace™ Hex 4/pkg2085 Screwdriver Hex 0,050" Length 0,75" 2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de produtos – Steri-Oss™ NobelEsthetics®

124

Port

uguê

s

Page 125: Dental Implants Parts

Steri-Oss™

Número do artigo Componente Número do artigo antigo

PME Transmucosal Abutment (PME Abutments Include Healing Cap)

3,25 mm2157 PME Transmucosal Abutment 3 mmH, 3,25 mm Non-Hex2390 PME Transmucosal Abutment 3,75 mmH, 3,25 mm HL 2391 PME Transmucosal Abutment 5 mmH, 3,25 mm HL

3,8 mm/4,5 mm2123 PME Transmucosal Abutment 2 mmH, 3,8 mm Non-Hex2124 PME Transmucosal Abutment 3 mmH, 3,8 mm Non-Hex2125 PME Transmucosal Abutment 4 mmH, 3,8 mm Non-Hex2273 PME Transmucosal Abutment 3 mmH, 3,8/4,5 mm HL2274 PME Transmucosal Abutment 4 mmH, 3,8/4,5 mm HL2275 PME Transmucosal Abutment 5 mmH, 3,8/4,5 mm HL

5,0 mm61943 PME Transmucosal Abutment 3,25 mmH, 5,0 HL/Replace™ Hex61944 PME Transmucosal Abutment 4,25 mmH, 5,0 HL/Replace™ Hex61945 PME Transmucosal Abutment 5,25 mmH, 5,0 HL/Replace™ Hex

Produtos suplementares31705 PME Abutment Analog 21282149 PME Coping, Gold/Plastic31708 PME Impression Coping Open Tray 21172496 PME Temporary Coping2346 Coping Screw Hex 2 mm 4/pkg31704 Coping Screw Slot 16 mm 21222129 Transmucosal Abutment Wrench2476 Torque Wrench Insert Transmucosal Abutment

O-Ring Abutment

3,25 mm31548 O-Ring Abutment 2,5 mmH, 3,25 mm HL 242731549 O-Ring Abutment 4,0 mmH, 3,25 mm HL 242831711 O-Ring Abutment 2 mmH, 3,25 mm Non-Hex 2488

3,8 mm/4,5 mm31550 O-Ring Abutment 2 mmH, 3,8/4,5 HL 248231551 O-Ring Abutment 3 mmH, 3,8/4,5 HL 248331552 O-Ring Abutment 4 mmH, 3,8/4,5 HL 248431710 O-Ring Abutment 2 mmH, 3,8 mm Non-Hex 2485

Nota: Os pilares O-Ring e Retainer Ring têm de ser adquiridos separadamente.

Produtos suplementares2493 O-Ring Abutment Analog w/Spacer 2/pkg2078 O-Ring Clinical White 12/pkg2413 Retainer Rings 2/pkg

NobelEsthetics® Catálogo de produtos – Steri-Oss™

125

Port

uguê

s

Page 126: Dental Implants Parts

Steri-Oss™

Número do artigo Componente Número do artigo antigo

Conical Abutment

2660 Coping Conical Abutment Non-Engaging Gold 3,25/3,8/4,5 HL

Produtos suplementares2688 Analog Conical Abutment 3,25/3,8/4,5 HL

Coronal Screw Sets

2456 Coronal Screw Set 3,25 Non-Hex2464 Coronal Screw Set 3,8 Non-Hex

Produtos suplementares2085 Screwdriver Hex 0,050" Length 0,75"2472 Torque Wrench Insert Hex 0,050" Short

Transfer Impression Components

3,25 mm31529 Thread Timed Transfer Pin 3,25 Non-Hex 217531530 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,25 mm HL 2640

3,8/4,5 mm31709 Transfer Assembly Hex Open Tray, 4,5 mmD, 3,8/4,5 HL 2317

5,0 mm31533 Transfer Assembly Hex Open Tray, 6,0 mmD 5049

5,0 mm HL/Replace™ Hex

6,0 mm31534 Transfer Assembly Hex Open Tray 6,0 mmD 6,0 HL/Replace™ Hex 60701

Produtos suplementares2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"

Catálogo de produtos – Steri-Oss™ NobelEsthetics®

126

Port

uguê

s

Page 127: Dental Implants Parts

DiversosNúmero do artigo Componente Número do artigo antigo

ScrewdriversManual2080 Ratchet2082 Ratchet Adapter2085 Screwdriver Hex 0,050" Length 0,75"2086 Screwdriver Hex 0,050" Length 1,25"2129 Transmucosal Abutment Wrench2431 Screwdriver Hex 0,030" Length 0,75"2432 Screwdriver Hex 0,030" Length 1,25"2476 Torque Wrench Insert Transmucosal Abutment

Machine2430 Screwdriver Machine Slot2472 Torque Wrench Insert Hex 0,050" Short2473 Torque Wrench Insert Hex 0,050" Long61760 O-Rings for Tools 2 sets of 5/pkg

Implant Analogs31706 Implant Analog, Non-Hex 21995052 Implant Analog, 5,0 HL/Replace™ Hex35706 Implant Analog, 3,5 mm/Replace™ Hex43714 Implant Analog, 4,3 mm/Replace™ Hex2687 Implant Analog, 3,8/4,5 HL6129 Implant Analog, 6,0 HL/Replace™ Hex

Polishing Caps35708 Polishing Cap Implant, 3,5 Replace™ Hex 4/pkg43708 Polishing Cap Implant, 4,3 Replace™ Hex 4/pkg50706 Polishing Cap Implant, 5,0 Replace™ Hex 4/pkg

Abutment Analogs2688 Analog Conical Abutment 3,25/3,8/4,5 HL31705 PME Abutment Analog 21282493 O-Ring Abutment Analog w Spacer 2/pkg

Surgical and Prosthetic Accessories2148 Thread Cleaning Tap 3,25/3,8 mm Non-Hex2496 PME Temporary Coping 29168 Torque Wrench Multi-unit Adapter29171 Torque Wrench Unigrip™ Adapter

Abutment Screws31704 Coping Screw Slot 16 mm 21222346 Coping Screw Hex 2 mm 4/pkg2699 Abutment Screw TorqTite™ 3,8/4,3/4,5/5,0/6,0 HL/Replace™ Hex61670 Abutment Screw Easy Abutment™ 1 mm Replace™ Hex61671 Abutment Screw Easy Abutment™ 2 mm Replace™ Hex61979 Abutment Screw TorqTite™ 3,25 HL/3,5 Replace™ Hex31707 Abutment Screw Slot 3,25 HL/3,5 Replace™ Hex 62200

NobelEsthetics® Diversos

127

Port

uguê

s

Page 128: Dental Implants Parts

EUROPE AND RUSSIA

AUSTRIANobel Biocare AustriaPhone: +43 1 892 89 90

BELGIUMNobel Biocare BelgiumPhone: +32 2 467 41 70

DENMARKNobel Biocare DenmarkPhone: +45 39 40 48 46

FINLANDNobel Biocare FinlandPhone: +358 9 343 69 70

FRANCENobel Biocare FrancePhone: +33 1 49 20 00 30

GERMANYNobel Biocare GermanyPhone: +49 221 500 85 590

HUNGARYNobel Biocare HungaryPhone: +36 1 279 33 79

IRELANDNobel Biocare IrelandPhone: toll free 1800 677 306

ITALYNobel Biocare ItalyPhone: +39 039 683 61Cust. support: toll free 800 53 93 28

LITHUANIANobel Biocare LithuaniaPhone: +370 5 268 3448

NETHERLANDSNobel Biocare NetherlandsPhone: +31 30 635 4949

NORWAYNobel Biocare NorwayPhone: +47 64 95 75 55

POLANDNobel Biocare PolandPhone: +48 22 549 93 50Cust. support: +48 22 549 93 52

NORTH AMERICA

CANADANobel Biocare CanadaPhone: +1 905 762 3500Cust. support: +1 800 939 9394

USANobel Biocare USAPhone: +1 714 282 4800Cust. support: +1 800 322 5001

CENTRAL/SOUTH AMERICA DISTRIBUTOR MARKETS

CHILEECM Ingeniera S.A.Phone: +56 2 655 5500Cust. support: +56 2 655 5502

COLOMBIAHospimedics S.A.Phone: +57 1 620 9410Cust. support: +57 1 620 9410

BRAZILNobel Biocare BrazilPhone: +55 11 5102 7000Cust. support: 0800 169 996

MEXICONobel Biocare MexicoPhone: +52 55 524 974 60

ASIA PACIFIC

AUSTRALIANobel Biocare AustraliaPhone: +61 2 8064 5100 Cust. support: toll free 1800 804 597

CHINANobel Biocare ChinaPhone: +86 21 5206 6655Cust. support: +86 21 5206 0974

HONG KONGNobel Biocare Hong KongPhone: +852 2845 1266Cust. support: +852 2823 8926

INDIANobel Biocare IndiaPhone: +91 22 6751 9999Cust. support: toll free 1 800 22 9998

JAPANNobel Biocare JapanPhone: +81 3 6717 6191

NEW ZEALANDNobel Biocare New ZealandPhone: +61 2 8064 5100Cust. support: toll free 0800 441 657

SINGAPORENobel Biocare SingaporePhone: +65 6737 7967Cust. support: +65 6737 7967

TAIWANNobel Biocare TaiwanPhone: +886 2 2793 9933

EUROPE AND MIDDLE EAST DISTRIBUTOR MARKETS

BAHRAIN, BULGARIA, CROATIA, CYPRUS, CZECH REPUBLIC, GREECE, IRAN, IRAQ, ISRAEL, JORDAN, KUWAIT, LEBANON, MALTA, OMAN, ROMANIA, SAUDI ARABIA, SERBIA, SLOVAKIA, SLOVENIA, TURKEY, UNITED ARAB EMIRATES, QATAR

Phone: +48 22 549 93 56Cust. support: +48 22 549 93 55

AFRICA

SOUTH AFRICANobel Biocare South AfricaPhone: +27 11 802 0112

PORTUGALNobel Biocare PortugalPhone: +351 22 374 73 50Cust. support: toll free 800 300 100

RUSSIANobel Biocare RussiaPhone: +7 495 974 77 55Cust. support: toll free 8 800 250 77 55

SPAINNobel Biocare SpainPhone: +34 93 508 8800Cust. support: toll free 900 850 008

SWEDENNobel Biocare SwedenPhone: +46 31 335 49 00Cust. support: +46 31 335 49 10

SWITZERLANDNobel Biocare SwitzerlandPhone: +41 43 211 53 20

UNITED KINGDOMNobel Biocare UKPhone: +44 208 756 3300

Customer Service worldwide.v 12:3

www.nobelbiocare.com

1585

4 H

ML

1211

Prin

ted

in S

wed

en. N

obel

Bio

care

Ser

vice

s A

G, 2

010.

A

ll rig

hts

rese

rved

. Nob

el B

ioca

re, t

he N

obel

Bio

care

logo

typ

e an

d al

l oth

er t

rade

mar

ks a

re, i

f not

hing

els

e is

sta

ted

or is

evi

dent

from

the

con

text

in a

cer

tain

cas

e, t

rade

mar

ks o

f Nob

el B

ioca

re. P

rodu

ct im

ages

are

not

nec

essa

rily

to s

cale

.