Deltronic Optical Comparators DV-114 and DV- · PDF fileWhen you think of accurate...
6
Transcript of Deltronic Optical Comparators DV-114 and DV- · PDF fileWhen you think of accurate...
When you think of accurate measurement, think of DELTRONIC. As a leader and innovator in high-accuracy products
for over forty years, we have been designing and manufacturing systems and solutions for thousands of applications
on a worldwide basis. We feel our success was achieved because our goal has always been to deliver quality products
backed by excellent service at fair prices. It always will be.
3-Position Lens TurretProvides for instantaneous magnification lenschange without recalibration. A standardfeature.
DVl1414"Vertical Bench-TopComparator System
Standard Featureso Hi / Low Enhanced 150 watt
Illumination System
o Fully Usable 14" Viewing Screen
o 8" X axis and 4" Yaxis Stage Travel
o Cross Roller Bearings
o Quick Release "X" Travel
o Sturdy All-Metal Design
o Erect Optical Image
o Easy-View Vertical Screen
o Rotating Chart Clips
o Electronic Screen Protractor [ESP)
o 3-Position Lens Turret
o Screen Locking Mechanism
Electronic Screen Protract (ESP)Reads angles directly and will display angles toeither a minute or 0.01 of a degree on an LEDreadout.ESP indicates angles from zero in either direction inboth INCREMENTAL and ABSOLUTE modes.A standard feature.
DV12424"VerticalComparator System
Standard Featureso Hi / Low Enhanced 150 watt
Illumination System
o Fully Usable 24" Viewing
Screen
o 8" X axis and 4" Yaxis Stage Travel
o Cross Roller Bearings
o Quick-Release 'X" Travel
o Sturdy All-Metal Design
o 30° Easy Viewing Screen Angle
o Quick-Change 3-Position Lens Turret
o Telecentric Lens System
o 500 watt Twin Fiber-Optic ///umination
for surface measurement
o Screen Locking Mechanism
o Electronic Screen Protractor [ESP)
o Built-in Hood and Curtain [not shown)
DV124 Available Options
I~II 0 Ko I. DI I
o Motorized Stage with Jojstick Controlo Motorized Focus Axiso Automated Measurement Systems rAMS}, gives
you automatic inspection
o Automatic Edge Sensingo Extended 12"X Axis and 6" YAxis Stage Travel
Deluxe Measurement Software....-«rH.....
Basic Digital Readout
612RStandard Featureso 2 Axis Readouto 3 Point Radiuso Polar Coordinateso 9 Point Store and Recallo Datum Referenceo Inch/Metrico Preset
Standard Digital Readout
MPC-5Standard Featureso 2 Axis Readouto Alpha Display for Promptso 30 Point, Multi-Point Functionso Radius, Angle, Line, Point,
Skew, Scan and DatumReference
o Inch, Metric, Polar, Preset,Centerline, Complement
0100 Store and Recall points
MPC-6Standard Featureso 2 Axis Readouto Message Windowo 30 Point, Multi-Point Functionso Includes CAD/CAMo Storage Windowo Radius, Angle, Line, Point,
Skew, Scan and DatumReference
o Inch, Metric, Polar, Preset,Centerline, Complement
o Includes G D & T
Optionso Automatic Edge Sensing
Optionso 3 Axis Readouto Programmable Footswitcho Programmable Remote
Keypado SPC Outputo Automated Measurement
System rAMS)o Automatic Edge Sensing
Optionso 3 Axis Readouto SPC Outputo Automated Measurement
System rAMS)
o Automatic Edge Sensing
DVl14 Available Optionso Motorized Stage with Joystick Controlo Motorized Focus Axiso Automated Measurement Systems rAMS), gives
you automatic inspection
o Automatic Edge Sensingo 250 watt Twin Fiber-Optic Illumination for surface
measurement
26,0" (660 mm)20,0"
(508 mm)
EE
8
4,25" (107) mm)r'C.=:::l'=-1~b=l
1. Fully usable 14" (355mm) viewing screen withedge-to-edge accuracy of 0.05%, 15.5"(394mm) glass screen
2. 8" X axis (203mm) and 4" Y axis (101.1 mm) stage travel3. Hard anodized stage surface4. Screen-locking mechanism5. Digital Electronic Screen Protractor (ESP) with
INC/ABS switchable displays 1'or .01 0
6. QUick-change 3 Position Lens Turret7. Vertical screen for easy viewing8. Rotating Chart Clip System mounted on screen9. Quick-release X axis clutch for rapid stage move-
ment with infinite fine adjustment10. Erect image11. Telecentric Lens System12. 150 watt Profile Illumination System with hi/low
intensities
Lens Specification
Screen15.5" (393mm) diameter glass screenCrosslines at 0°,90°, and +/- 30°l' or 0.01 ° digital display
Magnification LenseslOx, 20x, 25x, 31 .25x, 50x, 100x
Magnification Accuracy±0.05% contour±0.1 0% surface
Profile IlluminationTungsten-Halogen bulb, 24 Volt 150 WattBlower cooled
Surface IlluminationTungsten-Halogen bulb, 24 Volt 250 WattFiber-Optic DeliveryBlower cooled
Work StageStandardTravel X-axis 8" (203mm) and 4" (101 mm) Y-axisSurface Hard Anodized Alum; 15" (381 mm) by 8"(203mm) with dovetail.Focus Travel 2" (50mm)Option 1. Extended X-axis Travel of 12"Travel X-axis 12" (304mm) and 4" (1 01 mm)Y-axisSurface Hard Anodized Alum. 19" (482mm) by10,3" (261 mm); with dovetail.Option 2. Motorized X&Y Axis with Joystick,Option 3. Motorized Focus Axis,Option 4. Automated Measurement System - AMS,
o True Telecentric Design - total image stability.o Magnesium fluoride coated for high performance lens transmission
and contrast.o Spherical aberration correction,o Optional green filter is recommended for all magnifications other than
50x and 100x.
lOx 20x 25x 31.25x 50x 100x
Field of View 1.40" .70" ,56" ,45" ,28" ,14"(largest diameter on screen) 35,56mm 17.78mm 14.22mm 11,43mm 7,11mm 3,56mm
Working clearance 2.97" 1,85" 1,80" 2.00" ,82" ,58'lens to work piece 75,44mm 46.99mm 45.72mm 50,80mm 20,83mm 14.73mm
Maximum diameter 4,00 4.00 4.00 4.00 4,00 4,00of horiz. cylindrical 102mm 102mm 102mm 102mm 102mm 102mm
work piece
Machine WeightElectrical Net approximately 300 pounds,
11 5/230 Volts - shipping weight approximately 450
50/60 Hz (24 Volts to all lamps) pounds. CE Approved,
Distributed by:
SPECIFICATIONS
Standard Features DVl 24
1. Fully usable 24" (609mm) viewing screen with edge-to-edge accuracy of 0.05%
2. 8" X-axis (203mm) and 4" Y-axis (101 mm) stage travel3. Hard anodized stage surface4. Screen-locking mechanism5. Digital Electronic Protractor (ESP) with INC/ABS switch-
able displays 1'or .OP6. QUick-change 3 Position Lens Turret7. 30° easy viewing screen angle8. 150 watt Profile Illumination System with
hi/low intensities9. 500 watt twin Fiber-Optic Surface illumination system10. Quick-release X axis clutch for rapid stage move-
ment with infinite fine adjustment11. Built-in hood and curtains12. Telecentric Lens System13. Quick Change Two Position Condenser Lens Turret.
Assures brightest images with all magnifications. LowPosition features easv viewina Green Filter as standard
I--- 51" (1295 mm)---l
rE-.- _EgN ~
~ ~ ,----:--:::?NNOJ,,-
'"
37" (940 mm)
Screen25" (635mm) diameter glass screenCrosslines at 00
, 900, and +/- 300
l' or 0,01 0 digital display
Magnification LenseslOx, 20x, 25x, 50x, 1OOx
Magnification Accuracy±0,05% contour±0,1 0% surface
Profile IlluminationTungsten-Halogen bulb, 24 Volt, 150 WattBlower cooled
Surface Illumination500 Watt Twin Fiber-Optic Delivery SystemWith two Tungsten-Halogen, 24Volt, 250Watt bulbsBlower cooled
Work StageStandard8"x15" surface ground and hard anodized withdovetailOptional10"x19" surface ground and hard anodized withdovetail
Stage TravelStandardX-Axis 8" (203mm) and V-axis 4" (101 mm)OptionalX axis 12" (304mm) and V axis 6" (152mm)
Stage Capacity701bs, max, 251bs for minimum deflection
Focus4" (101 mm) stage movement
Lens Specification
o True Telecentric Design - total image stability.o Magnesium fluoride coated for high performance lens transmission
and contrast.o Spherical aberration correction,
I I I I I
lOx 20x 25x 50x 100x
Field of View 2,40" 1.20" ,96" .48" .24"(largest diameter on screen) 60,96mm 30,48mm 24,38mm 12,19mm 6.10mm
Working clearance 5,15" 5.15" 4,64" 3.93" 1.88"lens to work piece 130.81mm 130.81mm 117,86mm 99,82mm 47,75mm
Maximum diameter 4.00" 4.00" 4,00" 4.00" 3.50"of horiz. cylindrical lO2mm lO2mm lO2mm lO2mm 89mm
work pieceI tI I I
Machine WeightElectrical Net approximately 500 pounds,115/230 Volts - shipping weight approximately50/60 Hz (24 Volts to all lamps) 700 pounds.
