Deliverables 6.1 Technical coordination
Transcript of Deliverables 6.1 Technical coordination
![Page 1: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/1.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
1 | P a g e
Deliverables 6.1
Technical coordination
Aquaponic is defined as integration of hydroponic into a recirculating aquaculture system
(RAS) in other words, the cultivation of plants and fish together in a recirculating ecosystem using
natural bacterial cycles in order to use fish produced wastes as plant nutrition which is crucial for
plant growth (Goddek et al., 2015). Hence, plants accompanied with nitrifying bacteria provide a
natural filter to eliminate dissolved nitrogen and phosphorous, controlling the accumulation of
waste nutrients from fish culture. This is system constitutes an environmentally friendly, organic
food-growing system that joins the best characteristics of hydroponics and aquaculture without the
need to remove any water or filtrate for aquaculture or add fertilizers for plants
Generally speaking, aquaponic systems are divided into two categories according to how
nutrients are employed: decoupled aquaponic systems (DAPS) and coupled aquaponic systems
(CAPS). (Forchino et al., 2017). On the one hand, in CAPS the two food producing systems (Fish and
soilless plant farming) are coupled in a single loop (Reyes Lastiri et al., 2016). On the other hand, in
DAPS fish and plants are integrated as separate functional units comprising individual water cycles
that can be controlled independently. In decoupled aquaponic systems; plants, fish and
remineralization are integrated as separate functional units comprising individual water cycles that
can be controlled autonomously. Moreover, the system design aims at a high degree of self-
sufficiency of the entire system. The system components are consequently designed and sized in
the way that the required manipulation to adjust conditions within the cycle can be minimized
(Goddek et al., 2016). Furthermore, Kloas et al. (2015) described a DAPS including a RAS and a
hydroponic unit set as two individual water cycles, where water loss due to evapotranspiration of
the plants was substituted on demand through a one way valve from the RAS, that in turn was
refilled with tap water. Thus, an improved control of the nutrient flows in addition to optimized
species-specific water conditions in both units were achieved. The fate of this approach is that the
water consumption is the pivotal factor of DAPS, as it defines the water replacement and water
quality in the RAS in addition to the nutrient supply for the plants, if no additional
supplementation/fertilization is carried out. Consequently, understanding the impact of nutrient
flows and water within such systems is vital for defining their conceptual framework (Forchino et
al., 2017). The pros of DAPS have been recorded by many researchers for instance Jijakli et al. (2016)
observed a rise in plant growth of 39% compared to a pure hydroponic control nutrient solution
when enhancing the hydroponic component with additional fertilizer. Furthermore, Goddek (2016)
presented that anaerobic digestates also improved plant growth.
Numerous fish species are potentially suitable to be farmed in aquaponics. Though, the most
common fish species recorded with excellent growth rates in aquaponic units are: Nile tilapia,
common carp, grass carp, silver carp, barramundi, jade perch, catfish, rainbow trout, salmon,
Murray cod and largemouth bass. Moreover, many vegetable species can be integrated in the
system for instance leafy vegetables, such as lettuce (Lactuca sativa), basil (Ocimum basilicum) and
spinach (Spinacia oleracea). Plant can be cultivated using Media-Filled Beds Systems (MFBS), raft
![Page 2: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/2.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
2 | P a g e
systems (RAFT) and Nutrient Film Technique (NFT) gutter shaped bed. On the one hand raft systems,
also called Deep Water Culture (DWC), vegetables are fixed in polystyrene boards flowing on top of
the water. On the other hand, in Media-Filled Beds Systems, also called Media Grow Bed (MGB)
systems, the grow beds (GB) are filled with inert substrate (e.g. gravel or expanded clay), that
supports the plant and provides substrate for microbial community. On the contrary, The Nutrient
Film Technique (NFT) consists of narrow channels of perforated squared pipes where the roots are
partially immersed in a thin layer of streaming water (Sace and Fitzsimmons, 2013, Goddek et al.,
2015, Hu et al., 2015, Forchino et al., 2017).
Firstly, Media Grow Bed (MGB) units have variety of pros including; its simple and forgiving
design thus it considered ideal for beginners, recycled portions can be used, tall fruiting vegetables
are supported, all types of plants can be grown, multiple irrigation techniques, many types of media
can be used that serves as substrate for nitrifying bacteria, high aeration when using bell siphons
and relatively low electrical energy. Nevertheless, it has many cons such as: could be very heavy
depending on choice of media, media can be expensive and unavailable, higher evaporation than
NFT and DWC, labor-intensive to construct flood-and-drain cycles require careful calculation of
water volume, media can clog at high stocking density and plant transplanting is more labor-
intensive as the media needs to be moved (Lennard and Leonard, 2006, Somerville et al., 2014).
Secondly, NFT units have many strengths points including: cost-effective than media beds
on large scale, ideal for herbs and leafy green vegetables, minimal water loss by evaporation, light
hydroponic infrastructure, suits well for roof farming, very simple harvesting methods, pipes spacing
can be adjusted to suit different plants, well researched by commercial hydroponic ventures, require
smaller volume of water and minimal labor to plant and harvest. However, it has many weaknesses
points such as: more complex filtration method, water pump and air pump are mandatory, cannot
directly seed, low water volume magnifies water quality issues, increases variability in water
temperature with stress on fish, water inlet pipes can easily clog and vulnerable to power outages
(Somerville et al., 2014).
Thirdly, DWC units have numerous advantages including : more cost-effective method than
media beds on large scale, large water volume dampens changes in water quality, can withstand
short interruptions in electricity, minimal water loss by evaporation, well researched by commercial
hydroponic ventures, polystyrene rafts insulate water from heat losses/gains keeping constant
temperatures, shifting rafts can facilitate planting and harvest, Rafts provide biofilter surface area,
DWC canals can be fixed with plastic liners using almost any kind of wall (wood, steel frames, metal
profiles) and can be used at multiple stocking densities. Though the disadvantages of DWC units are
the complex filtration method, heavy weight unit, requirement of high amount of dissolved oxygen
in the canal thus air pump is essential, plastic liners have to be food-grade, polystyrene sheets are
easily broken, tall plants are more difficult to support and large water volume upsurges humidity
and the risk of fungal disease (Rakocy and Hargreaves, 1993, Somerville et al., 2014).
Integrated models have become novel trends in advanced aquaponic system. Vermiculture
assisted model is one of these models in which the residues from the crops and other kitchen waste
can be used to feed a worm culture system (vermiculture), then these worms can be used to feed
![Page 3: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/3.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
3 | P a g e
the fish, creating a closed cycle. In such model, nutrients lacking from the fish farm can be
supplemented by addition of “minced worm” from the worm farm. Additionally, restudies such as
meat and faeces, which cannot be fed to the worm culture, can be used to breed soldier fly that can
efficiently convert the waste into high-protein larvae that can be fed to the fish (Stankus, 2013).
Suggested Aquaponic Designs
1. Aquaponic Models
Figure 1. Aquaponic model scheme no. 1
Figure 2. Aquaponic model scheme no. 2
NB: Using clarifier for mechanical filtration as, maintenance-free, no electricity, requires only
purging the system from sludge.
![Page 4: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/4.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
4 | P a g e
Figure 3. Aquaponic model scheme no. 3
NB: Using hydrocyclone for mechanical filtration as, maintenance-free, no electricity, requires only purging the system from sludge.
2. Integrated Aquaponic Model
Figure 4. Integrated aquaponic model scheme
![Page 5: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/5.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
5 | P a g e
Deliverables 6.2.
Set-up a multi-use aquaponics production platforms study case
Since aquaponics is still a developing science, with lots of variables, the only way to obtain
conclusive data that will improve the performance of an aquaponic system is through controlled
experimentation.
In that regard, at the Department of Aquaculture, Environmental Science and Cadaster,
“Dunarea de Jos” University of Galati, an experimental modular aquaponic system in which we can
test a series of variables in a controlled environment in order to determine the performance of an
integrated aquaponic system was built. Thus, based on existing research and literature, a decent
amount of variables and the hypothesis behind a new aquaponic system are able to be tested, with
minimal resources, before scaling up to production experimentation.
Deliverables 6.3.
The multi-use aquaponics production platform technologies for installation,
operation and maintenance
Experimental Design
This aquaponic system includes twelve identical aquaponic modules, grouped into four
metallic frames, each with three such aquaponic modules.
An aquaponic module is comprised of:
• metallic frame
• one fish rearing unit
• water recirculating system
• one mechanical filtration unit
• one biological filtration unit
• two hydroponic units
• lighting system
The thought behind the grouping of the aquaponic modules into four frames each with three
of these modules was to create a minimalist ensemble in which we can run a series of variables in
triplicate. Also we took into consideration the space it would occupy and the building process.
The metallic frame
This is the backbone of the experimental design process, since it was conceived to perfectly
fit all three aquaponic modules and their components perfectly.
It was built with 20x20 mm, 2 mm thick and 25x25 mm, 1.5mm thick, square hallow steel
profiles, cut to specific lengths to form the 22 pieces. We decided against welding these pieces
together since we wanted everything to be modular and able to be taken apart and reassembled in
a different location, without having to deal with the hulk of the finished frame. Instead we joined
everything together with screws, washers and nuts.
![Page 6: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/6.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
6 | P a g e
A roof also was fitted to the frame, made of two metallic “L” profiles, a 42x42 mm, 2.5 m
long wooden beam, and a sheet of 5mm polycarbonate. The wooden beam also serves as hanging
support for the two LED grow lamps.
A couple of coats of rust resistant paint were applied to give it a nice finish and protection.
Plastic covers were used to seal the ends of all metallic profiles.
Figure 5. Front and side views of the metallic frame supporting the three aquaponic modules
Figure 6. Top view of the metallic frame
![Page 7: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/7.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
7 | P a g e
Photo 1. Metallic frame and aquaponic modules
Fish rearing unit
The fish rearing unit is a 180 liter heavy duty plastic container that is sitting right on the
ground, underneath the metallic frame. It’s large enough for small and medium sized fish to be
reared at various, comfortable, stocking densities providing enough nutrients for the plants growing
in the two hydroponic units.
Fish waste gathers on the bottom of the unit and can easily be siphoned out during cleanup.
Figure 7. Front, side and top view of the fish rearing unit
![Page 8: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/8.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
8 | P a g e
Photo 2. Fish rearing unit plastic container
Water recirculating system
This is comprised of two components: a water pump and polypropylene pipes.
The water pump is an Aqua Zonic Evo E05, with a flow rate of 3000 liters per hour, enough
for a system of this size.
The pump is submerged halfway in the fish rearing unit from where it pumps the water up
through a polypropylene pipe into the mechanical filtration unit, and from there on, the water
moves gravitationally through the rest of the system. From the mechanical filtration unit to the
biological filtration unit, through distribution pipes to the two hydroponic units and from there back
into the fish rearing unit.
Figure 8. Front and side view of an aquaponic system
![Page 9: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/9.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
9 | P a g e
The pump is enclosed in a mesh in order to prevent fish waste and fish feed to enter the
system. These can clog pipes, filters and even the hydroponic modules and plant roots. A certain
degree of waste and feed accumulation in the system is inevitable, but we strive to reduce this to a
possible minimum.
Photo 3. Aqua Zonic Evo E05 pump inside the rearing unit
Photo 4. Water pump and polypropylene pipe
Mechanical filtration unit
This is an improvised mechanical filter that uses sponges of two different density, housed
inside a plastic container.
The water passes through these sponges and retains most of the waste. A pipe is fitted at
the bottom, through which water is evacuated further down the recirculation cycle, into the
biological filtration unit.
![Page 10: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/10.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
10 | P a g e
Figure 9. Section through the mechanical filtration unit
Figure 10. Side and top view of the mechanical filtration unit
Photo 5. Mechanical filtration unit
Biological filtration unit
This is also an improvised biological filter, which is a simple plastic container, filled with
hundreds small plastic media beads on which naturally-occurring bacteria (mainly Nitrosomonas sp.
and Nitrobaecter sp.) can develop.
Bacteria develops in other parts of the system, like on the rearing unit and hydroponic units
walls, the mechanical filtration unit sponges and even in the hydroponic units and on the plant roots,
but it is here, in the biological filtration unit where most of the denitrification process will take place.
![Page 11: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/11.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
11 | P a g e
The water trickles through the media and converts dangerous ammonia and nitrites into
nitrate. A pipe is fitted at the bottom, through which water is evacuated, through pipes, into the
hydroponic units. A plastic net is fitted over the evacuation connector to prevent the small media
beads from blocking the pipe.
Figure 11. Section through the biological filtration unit
Figure 12. Side and top view of the biological filtration unit
![Page 12: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/12.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
12 | P a g e
Photo 6. Biological filtration unit
Photo 7. Plastic media beads
Both the mechanical and the biological filtration units are fitted to the metallic frame by a
30mm wide, 3mm thick, bent strip of steel joined to the metal post with screws, washers and nuts.
The units themselves rest on a 50mm wide, 5mm thick, bent strip of steel, also joined the metal post
with screws, washers and nuts.
Photo 8. Mechanical and biological filtration units fitted to the metallic frame
![Page 13: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/13.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
13 | P a g e
Figure 13. Front, side and top views of mechanical and biological filtration units supports
Figure 14. Front and side view of metallic frame with filtration units supports
![Page 14: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/14.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
14 | P a g e
Hydroponic units
The two hydroponic units are a couple of 90 liter heavy duty plastic containers, which rest
on two metallic beams. They can be used with both the Deep Water Culture (DWC) technique and
the Media Grow Bed technique.
The water is evacuated through a pipe connected to the bottom of the unit, and it can be a
continuous flow or - with the help of a fitted bell siphon – flood-and-drain (ebb-and-flow).
Each unit provides a growing area of 0.33 m2, and they are independent from one another.
Figure 15. Front, side and top view of the hydroponic unit
Photo 9. Hydroponic unit plastic container
![Page 15: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/15.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
15 | P a g e
Photo 10. Hydroponic units and water supply pipes
Lighting system
The lighting system is comprised of two SanLight M30 LED grow lamps, designed for small
operations. It offers maximum flexibility, especially for smaller areas of cultivation. The combination
of high-quality luminaires and a bespoke supply technology guarantee a high light output with a
long service life and high energy efficiency. Passive cooling increases the reliability and there is no
operating noise.
A universally applicable light spectrum enables the growing of young plants and seedlings as
well as the successful breeding of flowering and early plants.
Photo 11. SanLight M30 LED grow lamp and power convertor
Photo 12. SanLight M30 LED grow lamps in use
![Page 16: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/16.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
16 | P a g e
Nutrients Influence
Water is the life-blood of an aquaponic system. It is the medium through which all essential
macro- and micronutrients are transported to the plants, and the medium through which the fish
receive oxygen (FAO, 2014). An aquaponics nutrient solution is a passive medium for the passage of
nutrients from fish to plants (Cerozi and Fitzsimmons, 2016).
The chemical composition of aquaponics nutrient solutions is complex due to the large
number of dissolved ions and organic substances resulting from the release of excretory compounds
as a product of fish metabolism and feed digestion (Cerozi and Fitzsimmons, 2016). The interaction
between the main ions in the solution can influence the chemical composition of aquaponics nutrient
solutions (Cerozi and Fitzsimmons, 2016). Theoretically, a well-managed aquaponics could improve
nutrient utilization efficiency, reduce water consumption and improve yields of fish and plants (Fang
et al., 2017).
Nitrogen
Nitrogen (N) is a chemical element and an essential building block for all life forms and it is
the component of deoxyribonucleic acid (DNA), ribonucleic acid (RNA), amino acids, protein and
other cells (FAO, 2014; Wongkiew et al., 2017). Nitrogen is therefore the key element in the
aquaponic nutrient solution and serves as an easy-to-measure proxy indicator for other nutrients
(FAO, 2014). It is the most important nutrient for the fish and plants grown in aquaponic systems
(Fang et al., 2017). For plants, nitrogen is the most important inorganic nutrient (FAO, 2014).
Nitrogen originally enters an aquaponic system from the fish feed, usually labelled as crude protein
and measured as a percentage (FAO, 2014). Nitrogen uptake rate is influenced by many factors such
as nutrient concentrations, light intensity, humidity, temperature and ambient carbon dioxide
concentration (Wongkiew et al., 2017). Nitrogen transformation is one of the most important
processes in aquaponics (Fang et al., 2017). Aquaponics has been seriously hindered by the low
nitrogen utilization efficiency (NUE) and it seems that over 60% of the nitrogen input is unused (Fang
et al., 2017). It is known that in the fish waste, ammonia nitrogen is the main form of nitrogen
pollutant (90%) in the exit water (Addy et al., 2017). After being digested by fish, the nitrogen in the
fish feed is excreted mostly in the form of ammonia (Fang et al., 2017). Thus, ammonia nitrogen
excreted by fish provides nitrogen source for plant growth (Wongkiew et al., 2017). Due to the
assimilation and transformations of plants and microbes, nitrogen input is eventually distributed into
fish biomass, plant biomass, water and gaseous nitrogen (Fang et al., 2017). All four forms of nitrogen
(NH3, NH4+, NO2
-, NO3- ) can be used by plants and stimulate growth, however the form quickly
absorbed by plants is nitrate (Thorarinsdottir 2015). Vegetables primarily utilize NO3−, which is
converted to plant biomass (Wongkiew et al., 2017a). Nitrification is the main process that transforms
NH4+ to NO3
− in the presence of oxygen. Total ammonia nitrogen (TAN) is oxidized into nitrite
(NO2−) by ammonia oxidizing bacteria (AOB) (Nitrosomonas, Nitrosococcus, Nitrosospira,
Nitrosolobus, Nitrosovibrio sp., etc.) and ammonia oxidizing archaea (AOA). The resulting NO2− is
oxidized to NO3− by nitrite oxidizing bacteria (NOB) (Nitrobacter, Nitrococcus, Nitrospira,
Nitrospina sp., etc.) (Wongkiew et al., 2017). According to the nitrogen cycle in the aquaponic
system, the ammonia is firstly converted to nitrite (NO2−), and then nitrite is further converted to
nitrate (NO3−) (Fig.16) (Addy et al., 2017). Ammonia (NH3) and NO2
− must be kept at low
concentrations to avoid fish toxicity (Wongkiew et al., 2017a). Ammonia can be used as an
antibacterial agent, and at levels higher than 4 mg/liter it will inhibit and drastically reduce the
![Page 17: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/17.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
17 | P a g e
effectiveness of the nitrifying bacteria (FAO, 2014). In a fully functioning aquaponic unit with
adequate biofiltration, ammonia and nitrite levels should be close to zero, or at most 0.25–1.0 mg/liter.
(FAO, 2014). Although some fish species can detoxify ammonia to urea through the ornithine-urea
cycle, high levels of ammonia/ammonium are still very toxic to fish due to the accumulated NH4+
displaces K+ and depolarizes neurons and the excessive Ca2+ influx finally leads to cell death in the
fish’s central nervous system (Addy et al., 2017). In general, the total ammonia/ammonium level
should be controlled at less than 3 PPM (Addy et al., 2017). Once the nitrogen is converted to nitrate
nitrogen, it will be far less toxic to fish population and ready to be utilized by the vegetables (Addy
et al., 2017). Ammonia and nitrite are approximately 100 times more poisonous than nitrate (FAO,
2014). According to FAO (2014) the ideal values for nitrogen compounds are: ammonia <1 mg/L,
nitrite <1 mg/L and nitrate 5-150 mg/L. NO3− uptake rate by plant is higher than other nutrient uptake
rates, such as Ca2+, Mg2
+ and K+ (Wongkiew et al., 2017). An increase concentration in NH4+ results
in higher uptake rate by the plant, however, the preference for NH4+ and NO3
− depends on their
concentrations, growing stages and plant’s genetic factors (Wongkiew et al., 2017). Studies showed
that the NO3− in aquaponic systems can vary from 10 mg N/L to over 200 mg N/L without stress to
fish and plants (Wongkiew et al., 2017). Fish can tolerate levels of up to 300 mg/liter, with some fish
tolerating levels as high as 400 mg/liter. High levels (>250 mg/liter) will have a negative impact on
plants, leading to excessive vegetative growth and hazardous accumulation of nitrates in leaves,
which is dangerous for human health. It is recommended to keep the nitrate levels at 5–150 mg/liter
and to exchange water when levels become higher (FAO, 2014). The limit of N in the aquaponic
system ranges between 150-1000 PPM and the average is 250 ppm. In aquaponic systems the
alkalinity should be above 100 mg/L for a proper ammonia assimilation and nitrification process by
heterotrophic bacteria (Pinho et al., 2017). In aquaponics systems, alkalinity also plays an important
role in the nitrification process. As ammonia is converted into nitrite and further into nitrates, H+ ions
are expelled by nitrifying bacteria and alkalinity is consumed (Cerozi and Fitzsimmons, 2016).
Aquaponics has great potential to become a sustainable technology for nitrogen-rich waste
remediation with simultaneous year-round production of high quality fish and vegetables while
conserving the water. (Wongkiew et al., 2017).
Figure 16. Nitrogen cycle in an aquaponic system (Simionov et al., 2017)
![Page 18: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/18.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
18 | P a g e
pH
The pH is how acidic or basic the water is (FAO, 2014). In any aquatic system, pH is a main
factor that controls fish metabolism, microbial activities and affects the availability of nitrogen to
plants (Wongkiew et al., 2017). pH is one of the most important regulation factors for aquaponic
systems, and it needs to be balanced for fish, plants and microbes at the same time (Zou et al.,
2016). For plants, the pH controls the plants’ access to micro- and macronutrients. At a pH of 6.0–
6.5, all of the nutrients are readily available but outside of this range the nutrients become difficult
for plants to access (FAO, 2014). Solution pH in aquaponics systems is a compromise between
microbial and plant demands. Microbial nitrification of ammonia to nitrite and nitrite to nitrate is
optimized at pH 8.5, but plant nutrient uptake for many crop species is optimized near pH 6.0,
therefore pH in aquaponics systems is managed near pH 7.0 (Cerozi and Fitzsimmons, 2016). The
pH affects the toxicity of ammonia to fish, with higher pH leading to higher toxicity (FAO, 2014). The
biological oxidation of NH4+ and NO2
−, and the activity of nitrifiers decreases when the pH is below
6.4 and above 9.0 (Wongkiew et al., 2017). The pH value should be controlled at 7.0 or slightly above
7.0 because the nitrification slows down when pH drops below 7 and stops when pH is less than 6.0
(Addy et al., 2017). The optimal pH for nitrification is 7.5–8.0 (Zou et al., 2016). According to FAO
(2014) the optimal pH for Nitrosomonas sp. is 7.2-7.8 and for Nitrobacter sp. 7.2-8.2. Usually, the
recommended pH for plant cultivation is slightly acid (5.5–5.8) but a recent study determined that
pH 6.0 was optimal for plant growth and nitrogen utilization efficiency (NUE) in aquaponics., at the
expense of increased N2O emission due to high denitrification. (Zou et al., 2016). Plant production
would be higher if pH levels were lower. The pH level of the water has an impact on the biological
activity of the nitrifying bacteria and their ability to convert ammonia and nitrite (FAO, 2014). As
well, NUE in a media-based aquaponic system was found at maximum of 50.9% when the pH was
maintained at 6.4 and NUE dropped to 47.3% and 44.7% when pH was increased to 7.4 and 8.0,
respectively (Wongkiew et al., 2017). N2O emissions in aquaponic systems at low pH conditions were
reported to be higher than that in neutral pH conditions due to the inhibition of functional genes
such as genes encoding ammonia monooxygenase, nitrite reductase and nitric oxide reductase
(Wongkiew et al., 2017). Fish have specific tolerance ranges for pH as well, but most fish used in
aquaponics have a pH tolerance range of 6.0–8.5 (FAO, 2014).
The forms in which phosphorus exists in aquaponic solution also changes according to pH.
(Cerozi and Fitzsimmons, 2016). pH also influences the solubility of other nutrients such as calcium,
phosphorus, potassium, magnesium, etc., which affects their bioavailability for plant uptake
(Wongkiew et al., 2017). A pH of 7.5 can lead to nutrient deficiencies of iron, phosphorus and
manganese, a phenomenon known as nutrient lock-out (FAO, 2014). The rate of phosphate uptake
decreases as the pH of the external solution increases, which is explained by a reduction in the
concentration of H2PO4−, which is the substrate of the proton-coupled phosphate symporter in the
plasma membrane, in the pH range of 5.6–8.5; conversely, a decrease in pH can increase the activity
of proton-coupled solute transporters and enhance anion uptake. (Cerozi and Fitzsimmons, 2016).
Lowering the external pH from 8.0 to 4.0 increases phosphate uptake by a factor of 3 in maize roots,
while the concentration of the monovalent P species (HPO42−) was kept constant (Cerozi and
![Page 19: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/19.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
19 | P a g e
Fitzsimmons, 2016). As pH increases above 7.0 in aqueous solutions, most of the dissolved
phosphorus reacts with calcium forming calcium phosphates. Gradually, reactions occur in which
the dissolved free phosphate species form insoluble compounds that cause phosphate to become
unavailable. The pH affects the concentration of orthophosphate in the aquaponics nutrient
solution. The increase in pH lowered the overall concentration of orthophosphate, but only after pH
8.5 it was detected a significant difference in PO4 concentrations from the pH range where
orthophosphate was mostly available (pH 3.0–5.5). However, only pH 10.0 caused a significant
difference in orthophosphate concentration in comparison with the general pH maintained in
aquaponics nutrient solutions (pH 6.8) (Cerozi and Fitzsimmons, 2016). At pH 10.0 there is an
increase in the formation of calcium phosphate, which represented almost 17% of all the
phosphorus species in solution. (Cerozi and Fitzsimmons, 2016).
The carbonate speciation is also affected by pH of aqueous solutions and has a similar
behavior of the orthophosphate speciation. At high pHs, carbonate ions (CO32−) are the dominant
species in solution and react with calcium forming calcium carbonate. At pH 10.0, DOC species
bound to approximately 55% of the calcium in solution, which prevented Ca from binding to PO4
ions. (Cerozi and Fitzsimmons, 2016).
pH in aqueous phase is buffered by alkalinity. Alkalinity of 100–150 mg/L as CaCO3 is
recommended for aquaponic systems (Wongkiew et al., 2017). At low alkalinities (<100 mg/L
CaCO3), aquaponics nutrient solutions lose buffering capacity and become susceptible to large pH
fluctuations (Cerozi and Fitzsimmons, 2016). Alkalinity can be increased with slightly increase of pH
by adding weak bases such as calcium bicarbonate (Ca(HCO3)2). (Wongkiew et al., 2017).
It is recommended that pH in aquaponics systems is maintained at a range of 5.5–7.2 for
optimal availability and uptake by plants (Cerozi and Fitzsimmons, 2016). pH can be periodically
adjusted by using potassium hydroxide (KOH) and calcium hydroxide (Ca(OH)2), which can also
supply the essential nutrients to plants. (Wongkiew et al., 2017). There are many biological and
chemical processes that take place in an aquaponics system that affect the pH of the water, some
more significantly than others, including: the nitrification process, fish stocking density and
phytoplankton (FAO, 2014).
Macro and micronutrients
There are two major categories of nutrients: macronutrients and micronutrients. Both types
of nutrients are essential for plants, but in different amounts. Higher concentrations of
macronutrients are needed compared with the micronutrients, which are only needed in trace
amounts. Although all of these nutrients exist in solid fish waste, some nutrients may be limited in
quantity in aquaponics and result in deficiencies, such as potassium, calcium and iron (FAO, 2014).
The dynamics of accumulation for each nutrient is of primarily importance to identify the suitability
of using fish water to produce plants (Delaide et al., 2017).
If nutrient deficiencies occur, it is important to identify which element is absent or lacking in
the system and adjust the system accordingly by adding supplemental fertilizer or increasing
mineralization (FAO, 2014). Healthy plant growth requires the presence of additional macro- and
micronutrients (potassium (K), phosphorus (P), calcium (Ca), magnesium (Mg), sulphur (S), iron (Fe),
![Page 20: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/20.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
20 | P a g e
boron (B), copper (Cu), zinc (Zn), manganese (Mn), and molybdenum (Mo) in specific proportion and
concentration in the water (Delaide et al., 2017).
Phosphorus (P) is an important mineral in nucleic acids and cellular membranes, the main
representative of the structural components of the skeletal tissues, and it is directly involved in
energy processes (Petrea et al., 2014). P is used by plants as the backbone of DNA (deoxyribonucleic
acid), as a structural component of phospholipid membranes, and as adenosine triphosphate (the
component to store energy in the cells). It is essential for photosynthesis, as well as the formation
of oils and sugars. It encourages germination and root development in seedlings. Phosphorous
deficiencies commonly lead to poor root development because energy cannot be properly
transported through the plant; older leaves appear dull green or even purplish brown, and leaf tips
appear burnt. (FAO, 2014). After nitrogen, phosphorus is the second most frequently limiting
macronutrient for plant growth, making up about 0.2% of a plant’s dry weight. (Petrea et al., 2014).
Phosphorus is an important macronutrient for plants, but overuse of phosphoric acid can lead to
toxic concentration of phosphorous in the system (FAO, 2014). Plants deficient in phosphorus are
stunted in growth and often have an abnormal dark-green color (Petrea et al., 2014). Fish can absorb
this mineral from the water, but due to the low waterborne P concentration, dietary
supplementation is necessary (Petrea et al., 2014). Delaide at al. (2017) pointed out that most P
ends up in sludge (Delaide et al., 2017). Aquaponics can maximize phosphorus utilization 71.7% of
total P input, with fish and plants assimilating 42.3% and 29.4% of the phosphorus input in the feed,
respectively. 13.1% of the phosphorus input occurred in the unavailable form to fish and plants
(Cerozi and Fitzsimmons, 2017). Phosphorus deficiency causes stunted plant growth, whereas
phosphorus excess may lead to antagonistic interactions with micronutrients, especially zinc (Cerozi
and Fitzsimmons, 2017). 50% of the phosphorus input is retained by the fish, while 20% occurs in
the particulate form and 30% is dissolved as orthophosphates (d’Orbcastel et al., 2008). Plants can
only absorb P as the free orthophosphate ions H2PO4− and HPO42
− (Cerozi and Fitzsimmons, 2016).
DOC and alkalinity play a major role in maintaining free orthophosphate in aquaponics nutrient
solutions, possibly by protecting phosphorus from binding to free calcium ions (Cerozi and
Fitzsimmons, 2016). Low alkalinity concentrations affect the availability of phosphorus in
aquaponics nutrient solutions. However, DOC has a much more marked effect on the concentration
of phosphorus than alkalinity. The pHs for the dissociation of H3PO4 into H2PO4− and then into HPO42
−
are 2.1 and 7.2, respectively. Therefore, in the pH range maintained in aquaponics systems,
phosphorus is mostly present in the form H2PO4−, while H3PO4 and HPO42
− have lower activities.
(Cerozi and Fitzsimmons, 2016). In alkaline solutions, calcium is the dominant cation that reacts with
phosphate (Cerozi and Fitzsimmons, 2016). A general sequence of reactions in alkaline solutions
involves the formation of dibasic calcium phosphate dihydrate, octocalcium phosphate, and
hydroxyapatite. Each phosphate product formation results in the decrease of solubility and
availability of phosphate (Cerozi and Fitzsimmons, 2016).
Both Ca²+ and Mg²+ ions are essential plant nutrients and they are taken up by plants as the
water flows through the hydroponic components (FAO, 2014). Hard water can be a useful source of
micronutrients for aquaponics and has no health effects on the organisms. In fact, the presence of
![Page 21: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/21.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
21 | P a g e
calcium in the water can prevent fish from losing other salts and lead to a healthier stock (FAO,
2014). The optimum level of water hardness for aquaponics is about 60–140 mg/litre. (FAO, 2014).
Leafy vegetables can be favoured by calcium bases to avoid tip burns on leaves; while potassium is
optimal in fruit plants to favour flowering, fruit settings and optimal ripening (FAO, 2014).
According to Delaide et al. (2017) P and K are introduced in the aquaponic system from the
fish feed, while more than 75% of Ca, Mg and S was introduced by tap water. Tap water contains
low concentrations of NO3−–N and PO43–P (Delaide et al., 2017). Nutrients present in tap water are
directly available for plants, unlike the ones in feed. Tap water can be a convenient way to input
nutrients provided its quality and nutrient content is appropriate. (Delaide et al., 2017). Almost all
Fe, Zn and Mn were introduced in the system from the fish feed, while 50% of B and 30% of Cu were
introduced by tap water (Delaide et al., 2017). In order to prevent iron deficiency, FeSO4 was sprayed
on the plant leaves and no yellowing was noticed. (Delaide et al., 2017).
Sodium (Na) is a constant concern in aquaponic systems because it is released in the
technological solution by feed and fish. 75% of the Na was also introduced by tap water but it is
poorly absorbed by vegetables and tends to accumulate until toxic levels for hydroponic production.
Only water exchange rate could control its accumulation in solution. (Delaide et al., 2017).
Iron (Fe) and other micronutrients were in low concentration in solution because they are
released mainly as insoluble forms by fish and end up in sludge. In order to improve their recycling,
a solution should be to solubilize and reinject them in solution. (Delaide et al., 2017).
Potassium (K) is used for cell signaling via controlled ion flow through membranes. Potassium
also controls somatic opening and is involved in flower and fruit set. It is involved in the production
and transportation of sugars, water uptake, disease resistance and the ripening of fruits. Potassium
deficiency manifests as burned spots on older leaves and poor plant vigor and turgor. Without
potassium, flowers and fruits will not develop correctly and interveinal chlorosis, or yellowing
between the veins of the leaves, may be seen on the margins (FAO, 2014).
Fish-plants Combination
Aquaponic is a special form of recirculating aquaculture systems (RAS) consisting of fish tanks
(aquaculture) and plants that are cultivated in the same water circle (hydroponic) (Timmons et al.,
2002; Wilson et al., 2005). In aquaponic systems (AP), the nutrients that are needed for plant growth
are entirely or partially supplied by fish waste; fish excrete nitrogen (N) in the form of ammonia
(NH4) through their gills (Rakocy et al., 1992; Wilkie et al., 1997), while their faeces contain organic
N, phosphorus (P), and carbon (C) (Naylor et al., 1999; Saba et al., 2012). Nutrient levels from fish
aquaculture are suitable for plant growth and can be used by increasing fish biomass and feed rate
or by increasing the protein levels in the feed (Licamele, 2009).
An important step regarding the production activity within integrated recirculation systems
is the proper choice of the combination of fish species and plants to be raised. The operating ratio
of fish: plants in aquaponic systems required to maintain a good water quality for both fish and
plants and will depend on many factors, including:
• the scale and sophistication of settling and biofiltration;
![Page 22: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/22.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
22 | P a g e
• the use or not of anaerobic bio-filtration (which removes nitrogen from the system);
• the volume and surface area of the whole system;
• the quality (nutrient composition) of feed;
• the feeding rate;
• the species of fish and species of plant;
• the temperature and oxygen saturation of the water;
• the accumulation of organic matter and the extent of anaerobic zones; and
• the system potential for root development.
The most common fish raised in AP are tilapia, common carp, silver carp, grass carp, ornamental
fish (e.g. koi, goldfish, and tropical fish), catfish, perch, bluegill, trout, bass, barramundi, jade perch,
salmon, Murray cod, and largemouth bass (Rakocy et al., 2000; Rakocy et al., 2004; Petrea et al.,
2013; Mamat et al., 2016).
Regardless the species chosen the environmental criteria must to meet the requirements of the
chosen species. In table 1 are presented the water quality parameters for different species in RAS
(Dalsgaard et al., 2012; FAO, 2014) depending on which choices of fish-plant combinations can be
made.
Table 1. Water quality parameters observed under general conditions in operating, commercial or
pilot scale RAS
Species
Temperature (°C)
Total ammonia nitrogen
(mg/litre)
Nitrite (mg/litre)
Dissolved oxygen
(mg/litre)
Crude protein in feed
(%)
Growth-rate Grow-out
stage) Vital Optimal
Common carp (Cyprinus carpio)
4–34
25–30
< 1
< 1
> 4
30–38
600 grams in 9–11 months
Nile tilapia (Oreochromis niloticus)
14–36
27–30
< 2
< 1
> 4
28–32
600 grams in 6–8 months
Channel catfish (Ictalurus punctatus)
5–34
24–30
< 1
< 1
> 3
25–36
400 grams in 9–10 months
Rainbow trout (Oncorhynchus mykiss)
10–18
14–16 < 0.5 < 0.3 > 6 42 1000 grams in 14–16 months
Flathead mullet (Mugil cephalus)
8–32
20–27
< 1
< 1
> 4
30–34
750 grams in 9–11 months
Giant river prawn (Macrobrachium
rosenbergii)
17–34
26–32 < 0.5 < 2 > 3 35 30 grams in 4–5 months
Barramundi (Lates calcarifer)
18–34
26–29 < 1 < 1 > 4 38–45 400 grams in 9–10 months
Almost all plants can be grown in the aquaponic system but only a few have been tested and
proved to be economically efficient. The most popular plants are leafy vegetables and herbs –
especially lettuce and basil. These systems are generally less suitable for fruit vegetables because
have higher nutrient demand and may need different nutrient levels at different stages of growth
and because the production cycle is too long (more than 90 days) (Timmons and Ebeling 2013).
However, many plants species can be grown: coriander, spring onion, bok/pak choy, chiso,
vegetables such as tomato, cucumber, beets, okra, taro, blueberries, etc. (Commissioned Report for
New Zealand, 2013).
![Page 23: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/23.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
23 | P a g e
Plants within the aquaponic system need several nutrients that are required for the enzymes
that facilitate photosynthesis for both growth and reproduction. The nutrients are split up into two
categories; macro- and micronutrients. Whereas the six macronutrients are way more essential for
plants, micronutrients should also be taken into consideration, although they are only needed in
trace amounts. Jones et al., 2013) outline that there are six macronutrients: Nitrogen (N),
phosphorous (P), potassium (K), calcium (Ca), magnesium (Mg) and sulfur (S). Nitrogen is part of a
large number of vital organic compounds such as amino acids, proteins, coenzymes, nucleic acids,
and chlorophyll while Phosphorous plays a vital role in the synthesis of organic compounds such as
sugar phosphates, ATP, nucleic acids, phospholipids and coenzymes (Resh, 2001). A deficiency in
phosphorous will stunt growth and flowering or fruit set.
The range of micronutrients is much bigger. Iron (Fe) is often added to aquaponics due to its
general deficiency in those systems. Iron is required for chlorophyll synthesis and is an essential part
of cytochromes which are electron carriers in photosynthesis and respiration (Resh, 2001). Other
important micronutrients include copper (Cu), boron (B), manganese (Mn), molybdenum (Mo) and
zinc (Zn) (Epstein and Bloom, 2005; Trejo-Tellez and Gomez-Merino, 2012, Timmons and Ebeling,
2013, Aquaponics guideline, 2015).
It is very important that all nutrients to be in a proper balance for optimum plants growth
because plants used in large-scale systems don`t have the same nutrient requirement throughout
the development cycle. For example, lettuce requires large amounts of N at all stages and plants
like tomatoes and peppers need a large initial N, followed by a small amount of N and a large amount
of P and K for good fruit growth. Basil has a higher nitrogen content than lettuce or coriander, and
the balance between fish feeding and plant density may need to be adjusted accordingly. In table 2
are presented some requirements for some common aquaponic plants.
In contrast to plants, fish nutrition is very different. Nutrients are introduced into the system
through an input source, in this case, fish feed. Protein content in the feed dictates the amount of
nitrogen that is available to the plants after the fish assimilate and process the nutrients (Timmons,
1996).
The composition of fish feeds depends on the nature of the fish: whether it is carnivorous,
omnivorous, or herbivorous. Balancing the quantities of nutrients produced from the fish system
with the nutrient requirements of the plants can lead to optimized resource utilization and system
productivity. Omnivorous fish, including tilapia and carp, need about 25-35% protein in their diet,
and carnivorous fish need as much as 45% protein for optimal growth (Somerville et al., 2014).
James E. Rakocy et al.2004, combined the growing of tilapia (70 g) and basil (Ocimum
basilicum ‘Genovese’) in an outdoor, commercial-scale aquaponic system and the projected an
annual production of tilapia was arround 4.37 t, while the mean yield of basil was 2.0, 1.8 and 0.6
kg/m2.
![Page 24: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/24.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
24 | P a g e
Table 2. Vegetable production guidelines for the most common aquaponic plants (Somerville et al, 2014)
Plant pH Plant spacing Germination time
and temperature
Growth
time Temperature Light exposure
Plant height
and width
Recommended
aquaponic
method
Basil
5.5–6.5
15–25 cm
(8–40 plants/m2)
6–7 days with
temperatures at 20–25°C
5–6 weeks (start
harvesting when plant is 15 cm)
18–30 °C
optimal 20–25 °C
Sunny or slightly
sheltered
30–70cm
30cm
Media beds, NFT
and DWC
Cauliflower
6.0–6.5
45–60cm
(3–5 plants/m2)
4–7 days with temperature
8–20°C
2–3months (spring crops), 3–4 months
(autumn crops)
20–25°C for initial
vegetative growth, 10–15
°C for head setting
(autumn crop)
Full sun 40–60cm
60–70cm Media beds
Lettuce mixed
salad leaves 6.0–7.0
18–30cm
(20–25 heads/m2)
3–7 days;
13–21°C
24–32 days
(longer for some varieties)
15–22 °C
(flowering over 24°C)
Full sun (light shading
in warm temperatures
20–30cm;
25–35cm
Media bed, NFT,
and DWC
Cucumbers 5.5–6.5
30–60cm (depending
on variety;
2–5plants/m2)
3–7 days; 20–30°C
55–65 days
22–28 °C day, 18–20°C
night; highly susceptible to
frost.
20–200cm; 20–80cm Media beds;
DWC
Eggplant 5.5–7.0 40–60 cm
(3–5 plants/m2) 8–10_days; 25–30 °C
90–120 days
15–18_°C night, 22–26_°C
day; highly susceptible to
frost
Full sun 60–120 cm; 60–80 cm
Media beds
Peppers 5.5–6.5
30–60cm (3–4 plants/m2, or
more for small-sized
plant varieties)
8–12 days; 22–30°C
(seeds will not germinate
below 13°C)
60–95 days 14–16°C night time, 22–
30°C daytime Full sun
30–90cm;
30–80cm Media beds
Tomato 5.5–6.5 40–60 cm
(3–5plants/m2) 4–6 days; 20–30°C
50–70 days till first
harvest; fruiting 90–120
days up to 8–10months
13–16°C night, 22–26°C day
Full sun 60–180cm; 60–80cm
Media beds and DWC
Beans and peas 5.5–7.0
10–30 cm dependent on variety (bush
varieties 20–40 plants/m2,
climbing varieties 10–
12plants/m2)
8–10 days; 21–26°C
50–110 days to reach
maturity depending on
variety
16–18°C night, 22–26°C day
Full sun
60–250cm
(climbing); 60–
80cm (bush)
Media beds
Head cabbage 6–7.2 60–80 cm
(4–8 plants/m2)
4–7 days;
8–29°C
45–70 days from transplanting (depending
on varieties and season)
15–20°C
(growth stops at >25°C) Full sun
30–60cm; 30–
60cm Media beds
Broccoli 6–7 40–70cm
(3–5plants/m2)
4–6 days;
25°C
60–100days from
transplant 13–18°C
Full sun; can tolerate partial shade but will
mature slowly
30–60cm; 30–
60cm Media beds
Swiss chard /
mangold 6–7.5
30–30cm
(15–20 plants/m2)
4–5 days;
25–30°C optimal 25–35days 16–24°C
Full sun
(partial shade for temperatures > 26°C)
30–60cm; 30–
40cm
Media beds, NFT
pipes, and DWC
Parsley
6–7
15–30cm (10–15 plants/m2)
8–10 days; 20–25°C
20–30 days after transplant
15–25°C Full sun; partial shade
at >25°C 30–60cm; 30–
40cm Media beds, NFT
and DWC
![Page 25: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/25.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
25 | P a g e
Selek et al., 2017, has run a growing experiment of Nile tilapia (Oreochromis niloticus)
with an initial mean weight of 5.65 g, fed a commercial diet (50% protein) and a plants density
of 23 plants/m2, and after 3 experimental weeks the weight of basil doubled over the initial
value and at the final harvest basil showed a weight increase of more than 6 times over the
initial value (600 g/m2).
Bradley and Marulanda, 2001, grew basil in a hydroponic system, at a plant density of
25 plants/m2 and reported a higher yield of basil (at a rate of 6.25 kg/m2).
All these discrepancies between the results of the earlier studies in terms of the
harvest amount of basil in a square meter might be attributed to several factors, such as
different diet composition used for fish feeding, protein level and digestibility of the diet,
which may affect the diurnal pattern of ammonia excretion in fed fish, nutrient availability
and amount of nutrients in the production system, culture conditions such as water quality,
temperature fluctuations, length of growth period, or any combination of all these factors
(Selek et al., 2017).
Deliverables 6.4.
The advantages and the disadvantages of the multi-use aquaponics
production platform
The designed multi-use aquaponics production platform, like any experimental
systems, has its advantages (strengths) and disadvantages (weaknesses).
Advantages:
The system is very versatile, allowing a sizeable array of variables to be studied at the
same time;
It has a very low environmental impact;
It is relatively easy and inexpensive to build;
It has great water conservation, the only water replenished is that that is lost due to
evaporation, plant use and the small volume during the cleaning procedure;
It is efficiently constructed and it make good use of the occupied space;
It benefits from temperature and climate control;
It has low power consumption due to efficient LEDs and low wattage pumps;
It is bio-secure and can be compartmentally quarantined;
The system benefits from input and output control;
It is easy manageable;
It has a small footprint.
Disadvantages:
The system has limitations regarding fish stocking densities and also regarding crop
growing area;
![Page 26: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/26.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
26 | P a g e
Without a back-up power source, the production might be compromised – lighting,
water recirculation, aeration, and climate control are just some of the key components
that rely on a continuous power supply;
It requires experienced staff to manage, operate and maintain;
Permanent operational management must be provided;
It requires periodic cleaning and upkeep;
Deliverables 6.5.
Integrating remote sensing technology devices in aquaculture
Methods and Equipment
For the analysis of ammonia, nitrite, nitrate, total phosphorus and calcium from water
we will use the SAN ++ Automated Wet Chemistry Analyzer from Skalar. The equipment uses
the continuous flow analysis (CFA) principle, which is based on international standard
regulations such as ISO and can process a large volume of samples (Photo 13). During the
analysis, the results of all parameters are simultaneously displayed, including calibration
curves and statistical evaluations.
Method description:
Determination of ammonia is based on the modified Berthelot reaction; after dialysis
against a buffer solution of pH 5.2 the ammonia in the sample is chlorinated to
monochloramine which reacts with salicylate to 5-aminosalicylate. After oxidation and
oxidative coupling, a green colored complex is formed. The absorption of the formed is
measured at 660 nm;
The automated determination of Nitrate and Nitrite is based on the cadmium
reduction method; the sample is buffered at pH 8.2 and it passes through a column containing
granulated copper-cadmium to reduce nitrate to nitrite. Nitrite was determined by
diazotization with sulfanilamide and coupling with N (1-naphthyl) ethylenediamine
dihydrochloride to form a highly colored azo dye which is measured at 540 nm;
The automated procedure for the determination of Total phosphate is based on the
reaction between ammonium pentamolybdate and potassium antimony (III) oxide tartrate
react in an acidic medium with dialyzed and diluted solutions or phosphate to form an
antimony-phospho-molybdate complex. This complex is measured at 880 nm;
The calcium determination is based on the reaction of the sample with acetic 8
hydroxyquinoline solution to complexed magnesium. After dialysis the calcium is complexed
with phthalein purple in alkaline medium, the complex is measured at 580 nm.
![Page 27: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/27.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
27 | P a g e
Photo 13. The Skalar SAN++ equipment for water chemistry determination
Also, the concentration of nitrite, nitrate, total phosphorus and calcium from leaves,
roots, fish meat and feces will be also determined with the help of the SAN++, after a previous
digestion of samples at Top Wave Digestor from Analytik Jena (Photo 14).
The concentration of nitrogen (TKN) in fish meat, leaves, and roots of plants and feces
will be determined by the Kjeldahl method, according to STAS 9064/4-81 (Photo 15).
Photo 14. Analytik Jena Top Wave Digestor Photo 15. Parnas-Wagner for TKN
determination
The dissolved oxygen (DO) concentration will be determined using portable
Oxigenometer Pro2030 Dissolved Oxygen from YSI (Photo 16).
Determination of the pH and conductivity of the technological water will be
determined using a multi-parameter set of WTW, model InoLab 7110 (Photo 17) and for the
Oxidation Reduction Potential (ORP) we will use the ORP HQd from Hach (Photo 18).
Determination of the suspended material content from the technological water will
be performed according to SR EN 872-09, using the gravimetric method based on the
separation of suspended matter by filtration, followed by drying at 105°C and the weighing of
the residue at constant mass. For the drying step, an ESAC 50 drying oven will be used (Photo
19).
![Page 28: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/28.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
28 | P a g e
Photo 16. YSI Pro2030
Oxigenometer
Photo 17. WTW InoLab 7110 pH-
meter
Photo 18. Hach HQd Meter for
ORP
Photo 19. ESAC 50 drying oven
For determination of atmospheric humidity and temperature, we will use TRIX-8
Multi-Use Temperature Recorder (Photo 20). The equipment has a wide range recorder and
registering up to 8000 paired humidity and temperature readings simultaneously.
Principal characteristics are described below:
Sensor Measurement Range -40°C to +85°C.
Operating Temperature Range -40°C to +85°C.
Storage Temperature Range 0°C to +40°C.
Humidity Measurement Range 0% RH to 100% RH, with limitations.
Humidity Operating Range 0% RH to 100% RH, with limitations.
Humidity Resolution: Better than 0.1% RH.
Temperature Resolution: Better than 0.1°C or 0.1°F.
Photo 20. LogTag for humidity and temperature (model HAXO-8)
For monitoring technological water quality chemical parameters, Merck kits (Fig. 21,
Table 3) are used with the Merck Spectroquant Nova 400 spectrophotometer (Fig. 22).
Determining the chemical oxygen demand (COD) and the total organic carbon (TOC)
is done by following the Merck kits (Fig. 21, Table 3) protocol and with the same Merck
![Page 29: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/29.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
29 | P a g e
Spectroquant Nova 400 spectrophotometer (Fig. 22), but it also involves the double block
chemical digestion thermoreactor from WTW, CR4200 model (Photo 23).
Photo 21. Merck kits Photo 22. Merck
Spectroquant Nova 400 spectrophotometer
Photo 23. WTW CR4200 double block chemical
digestion thermoreactor
Table 3. The used methods for monitoring technological water quality chemical parameters
Technological water quality parameter Determining method used:
colorimetric method using MERCK spectroquant kits
Iron (Fe3+) RT 1.00796.0001
Total hardness KT 1.00961.0001
Magnesium (Mg2+) KT 1.00815.0001
Alkalinity KT 1.00961.0001
Manganese (Mn2+) RT 1.14770.0001
Potassium (K+) KT 1.14562.0001
Chlorine (Cl-) RT 1.00088.0001
Chemical oxygen demand (COD) KT 1.14895.0001
Total organic carbon (TOC) KT 1.14878.0001
For determining the biologic oxygen demand (BOD5) a Velp analyzer is used, being
comprised of a stirring unit, BOD sensors, carbon dioxide absorption supports, BOD custom
sampling bottles and magnetic stirrers (Photo 24). The analyzer is used along with a low
capacity Velp cooled incubator, model FTC 90I (Photo 25), equipped with auto-tuning
temperature regulator.
The Velp TB1 portable turbidimeter (Photo 26) is used for multiple analyzes for
determining turbidity.
Photo 24. Velp BOD5 analyzer
Photo 25. Velp FTC 90I cooled incubator
Photo 26. Velp TB1 portable turbidimeter
![Page 30: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/30.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
30 | P a g e
The lipids solubilization and extraction is realized using the Soxlet method, according to STAS 9065/10-75, with the help of a Raypa extraction equipment (Photo 27).
Photo 27. Raypa lipids extraction equipment
The organic solvent used for the lipids extraction is petroleum ether.
The used formula is:
% 𝒍𝒊𝒑𝒊𝒅𝒔 =𝑷𝒇 − 𝑷𝒊
𝒎𝒔∗ 𝟏𝟎𝟎
where,
Pf – the final mass of the product and beaker, after lipid extraction (g);
Pi – the initial mass of product and beaker, prior to lipid extraction (g);
ms – sample mass being analyzed (g).
The obtained results are used to calculate the lipids gain (retained lipids [RL]) as such:
[RL] = final mass * Lf – initial mass * Li
where,
Lf – final corporeal lipids;
Li – initial corporeal lipids.
Determining the moisture involves the drying inside a drying oven set at 105°C,
according to SR ISO 1442:2010. The used equipment are an analytic scale with 0.0001
precision weighing, a desiccator with a greased cover and hydro-absorbent substance and an
ESAC 50 drying oven (Photo 19).
The used formula is:
% 𝐰𝐚𝐭𝐞𝐫 =𝑪𝒇 − 𝑪𝒊
𝒎𝒔∗ 𝟏𝟎𝟎
where,
Pf – the mass of the crucible and sample, after drying (g);
Pi – the mass of the crucible and sample, prior to drying (g);
ms – sample mass being analyzed (g).
![Page 31: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/31.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
31 | P a g e
It must be mentioned that the ration between the water percentage and that of the
protein (W/P) from the fish muscle is determined in order to assess its food value.
For determining meat nitrogen free extract (NFE), of which class glycogen, simple and
phosphorylated carbohydrates, organic acids and inositol are part of, the following formula is
used:
% NFE = % DM - % ash - (% CP + % CL)
where,
DM – dry matter;
CP – crude protein;
CL – crude lipids.
For determining the total mineral substances (ash), the calcination method was used
at 525 ± 25°C until constant mass, according to SR ISO 931:2009. The equipment used for this
analysis consisted of a Nabertherm calcining furnace (Photo 28).
Photo 28. Nabertherm calcining furnace
The used formula is:
% 𝐚𝐬𝐡 =𝒎𝟐 − 𝒎𝟏
𝒎𝒔× 𝟏𝟎𝟎
where,
m2 – the mass of the crucible, after calcination (g);
m1 – the mass of the empty crucible, prior to calcination (g);
ms – sample mass being analyzed (g).
For a clearer picture of the quality of the biological plant material obtained under
aquaponic conditions, the determination of chlorophyll pigments is performed using two
methods of determination. The use of the two methods ensures their quantitative expression,
related to both the foliar surface unit and the foliar mass.
Thus, the first method for determining the chlorophyll and the carotenoids involves
the quartz pestling of the foliar samples under analysis. At the time of the formation of a
slurry, calcium carbonate and acetone are added. The obtained extract is filtered through a
vacuum into a crucible. The reading of the obtained solution (Photo 29) is done at three
wavelengths (663 nm, 644 nm and 440.5 nm) against acetone with d = 0.84 (control), using a
![Page 32: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/32.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
32 | P a g e
spectrophotometer SPECORD 210 from Analytik Jena, connected to a computer system
(Photo 30)
Photo 29. Chlorophyll extract solution (with
acetone) Photo 30. Analytik Jena SPECORD 210
spectrophotometer
The following formulas are used:
Chlorophyll a = (𝟗,𝟕𝟖𝟒 ∗𝐄𝟔𝟔𝟑−𝟎,𝟗𝟗∗𝐄𝟔𝟒𝟒)
𝐒∗𝟏𝟎𝟎∗ 𝟐𝟓 (mg/dm2)
Chlorophyll b = (𝟐𝟏,𝟒𝟐𝟔 ∗𝐄𝟔𝟒𝟒−𝟒,𝟔𝟓∗𝐄𝟔𝟔𝟑)
𝐒∗𝟏𝟎𝟎∗ 𝟐𝟓 (mg/dm2)
Carotenoids = 𝟒,𝟔𝟗𝟓∗𝐄𝟒𝟒𝟎,𝟓−𝟎,𝟐𝟔𝟖 (𝐂𝐡𝐥𝐨𝐫𝐨𝐩𝐡𝐲𝐥𝐥 𝐚+𝐂𝐡𝐥𝐨𝐫𝐨𝐩𝐡𝐲𝐥𝐥 𝐛)
𝐒∗𝟏𝟎𝟎∗ 𝟐𝟓 (mg/dm2)
where,
S - the foliar surface taken into account (recommended around 5 cm2).
The second method of chlorophyll determining involves grinding the foliar material,
coating it with ethyl alcohol, and positioning it for boiling into an Elma, model Elmasonic S10H
(Photo 31) water bath until total vegetation fragments are discolored.
To the obtained extract (Photo 32), ethyl alcohol is added and is read using the
spectrophotometer SPECORD 210 from Analytik Jena (Photo 30) at the following
wavelengths: 665 nm for chlorophyll a and 649 nm for chlorophyll b.
The following formulas are used:
Chlorophyll a = 𝟏𝟑,𝟗𝟓∗𝑬𝟔𝟔𝟓−𝟔,𝟖𝟖∗𝑬𝟔𝟒𝟗
𝒅∗𝟏𝟎𝟎𝟎∗𝑾∗ 𝑽 ∗ 𝑫 (mg/g fresh leaves)
Chlorophyll b = 𝟐𝟒,𝟗𝟔∗𝑬𝟔𝟒𝟗−𝟕,𝟑𝟐∗𝑬𝟔𝟔𝟓
𝒅∗𝟏𝟎𝟎𝟎∗𝑾∗ 𝑽 ∗ 𝑫 (mg/g fresh leaves)
where,
d – cell thickness (1 cm);
W – initial mass of vegetal material (g);
V – total volume of extract (mL);
D – dilution factor.
![Page 33: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/33.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
33 | P a g e
Photo 31. Elma Elmasonic S10H water bath Photo 32. Chlorophyll extract solution (with
ethyl alcohol)
Deliverables 6.6.
Decision support systems for multi-use aquaponics production
platform model
After reviewing the literature, we compiled a comprehensive list of variables that influence an aquaponic system’s design and efficiency.
Table 4. Aquaponic systems variables Source Variables
Kloas, W. et al., 2015 2 fish rearing unit volumes;
variable fish stocking densities;
2 plant crop densities;
Fierro-Sañudo, J.F. et al., 2018 2 sources of low-salinity water
No significant differences were found for the shrimp final individual weight, survival, growth rate and feed conversion ratio between the two low-salinity water sources. Lower basil yields were recorded in the case of the diluted seawater and no significant differences in basil production were found between the ground water and the control variants. Shrimp feed consumption associated to the total harvested basil was significantly lower in the ground water variant and no significant differences were found between the two variants regarding shrimp feed intake.
Rakocy, J.E. et al., 2004 2 cropping systems;
2 production systems;
2 fish stocking densities;
Batch and staggered production of basil produced comparable yields, but the growth of all plants in the same phase led to the depletion of nutrients in the culture water and the onset of nutritional deficiency disorders in the basil.
Medina, M. et al., 2016 2 fish feeds (aquafeeds);
The use of plant-based fish feed resulted in lower concentrations of nutrients in the culture water. Despite lower N and P content levels, the plant-based fish feed resulted in greater plant productivity than the fishmeal-based feed.
![Page 34: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/34.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
34 | P a g e
Licamele, J.D., 2016 2 production systems;
There was no significant difference in biomass or chlorophyll concentration index in lettuce grown with aquaponics water and nutrient supplements versus a hydroponic solution.
McGuire, T.M. and Popken, G.A., 2015
2 media grow bed designs;
The experimental data suggest that when there is no nitrate deficiency in a system, temperature can have an increasing effect on shoot to root ration (S:R). Furthermore we conclude that the greenhouse glazing was effective in capturing heat which yielded higher S:R in the augment beds.
Sirakov, I. et al., 2017 2 production technologies;
2 media grow bed substrates
A better removal capacity in ammonium, nitrate and ortho-phospahte were observed in the LECA section compared with the cleaning capacity in the raft section as a part of experimental aquaponic system. The raft technology showed better plant productivity compared with the one found for the LECA bed technology. The productivity of lettuce plants is highly dependent on the type of plant growing medium, when they are cultivated in the floating raft technology.
Hussain, T. et al, 2014 3 water flow rates;
2 production technologies;
The 1.5 L/min variant showed highest weight gain of koi carp fingerlings and also height gain of spinach plants as compared to other water flow rate variants. There was no significant difference in length gain, percentage weight gain, specific growth rate, feed conversion ratio, feed efficiency ratio, and protein efficiency ratio as compared to other treatments and control. All the treatments effectively remove nitrate, phosphate, and potassium from fish effluent tanks.
Knaus, U. et al., 2017 3 plant species;
3 system performance phases;
2 fish species;
Due to the high feed input at the beginning of the experiments, specific growth rate and feed conversion ratio were very good, and significantly better for African catfish compared with Nile tilapia. Feed conversion corresponded with much younger fish with effective feeding under restricted food input. The oxygen consumption was lower for African catfish with a significant difference to Nile tilapia. Due to reduced natural light illumination and water temperature (winter season), plant growth was generally reduced, but two times better in the Nile tilapia stocked unit compared with African catfish.
Salam, M.A. et al., 2014 3 media grow bed substrates;
Overall tomato plants growth and weight of fruits was higher in the case of gravel variant than in the case of the 1:1 gravel-sawdust mixture and the brick lets variants.
Saufie, S. et al., 2015 2 hydroponic techniques;
![Page 35: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/35.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
35 | P a g e
The analyzed data proves that the deep water culture (DWC) technique combined with the media grow bed (MGB) technique is more effective than just the single DWC hydroponic technique.
Endut, A. et al., 2009 Aquaponic (RAS system - growing bed technique - different flow rates).
Plant growth was highest at a water flow rate of 1.6 L/min. Removal of inorganic nitrogen was extremely efficient under various flow rates trials (0.8–4.0 L/min). It was found that all flow rates were efficient in nutrient removal and in maintaining the water quality parameters within the acceptable and safe limits for growth and survival of fish.
Endut, A. et al., 2010 Fish production performance, plant growth and nutrient removal were measured and their dependence on hydraulic loading rate (HLR) was assessed.
This study demonstrated that the changes in concentrations of different nutrients in aquaponic system differ because of the disparity between the relative proportions of available nutrients generated by fish and nutrients uptake by plants. The optimal HLR in term of fish productions, plant growth and percentage nutrient removal were found to be 1.28 m/day.
Lennard, W.A. and Leonard, B.V., 2004
The evaluation of the differences between two aquaponic flood regimes; reciprocal flow (hydroponic bed was periodically flooded) and constant flow (hydroponic bed was constantly flooded), in a freshwater aquaponic test system.
Constant flow replicates were superior in plant nitrate and phosphate assimilation, in pH buffering, in dissolved oxygen concentrations and statistically identical in water and bicarbonate consumption. Constant flow replicates produced a slightly higher fish biomass and more efficient food conversion (lower FCR), although this was not significant. Plant biomass and yield in lettuce was significantly higher for the constant flow system.
Trang, N. et al., 2010 The growth, productivity and nutrient uptake of four leaf vegetable species (Lactuca sativa, Ipomoea aquatica, Brassica rapa var. chinensis and Brassica rapa var. parachinensis) in a controlled growth experiment with three root flooding treatments (drained, half-flooded and flooded) to assess their preferred hydroponic growth requirements, biomass production and nutrient removal capacities I. aquatica grow best in a completely water-saturated substrate, and L. sativa grow well in hydroponic culture with partly flooded roots.
In contrary, the two Brassica varieties did not grow well at water-saturated conditions and therefore has less potential.
Lennard, W.A. and Leonard, B.V., 2006
The test of differences between three hydroponic subsystems, Gravel Bed, Floating Raft and Nutrient Film Technique (NFT), in a freshwater Aquaponic test system.
![Page 36: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/36.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
36 | P a g e
The present study showed that the NFT hydroponic subsystem was sig- nificantly less efficient than either Gravel bed or Floating raft hydroponic culture technologies.
Al-Hafedh, Y.S. et al., 2008 Testing different fish feed to plants ratios. It was determined that a fish feed to hydroponic surface ratio of 56 g/m2 was excellent to control nutrient buildup; however, plant density could be decreased from 42 to 25–30 plants/m2 to get marketable lettuce
Dediu, L. et al., 2012 Testing two different flow rates
Lower nitrate removal rate measured for hydroponic troughs under the higher flow rate treatment could
Damon, E. et al., 1997 Testing different initial biomasses of fish
In summary, this study demonstrated that the changes in concentrations of different nutrients in integrated systems differ because of the disparity between the relative proportions of available nutrients generated by fish and nutrients absorbed by plants.
Rafiee, G. and Saad, C.R., 2006 Testing the effect of natural zeolite on aquaponic production Results of this study have concluded that use of zeolite as bed medium could improve the environ- mental conditions for growing lettuce
Ghaly, A.E. et al., 2005 Five plants were examined for their ability to remove nutrients from aquaculture wastewater and suitability as fish feed: alfalfa, white clover, oat, fall rye, barley.
This study indicated that only oat, barley and rye can grow in this type of hydroponic system and could be used as a fish feed after being supplemented with fat, Ca, Na, Mn and Fe.
Taylor, P. et al., 2007 Determining the nitrification rate response in a perlite trickling biofilter (root growth medium) exposed to hydroponic nutrient solution, varying NO− 3 -N concentrations, and to pH levels optimum for plants (6.5) and nitrification (8.5).
Ammonia oxidation rate in perlite medium increased 1.75 times at pH 8.5 compared to the rate at pH 6.5. Nitrite oxidation rate increased 1.3 times un- der the same conditions.
Roosta, H.R. and Hamidpour, M., 2013
A comparative study between hydroponic vs aquaponic systems foliar application of some macro-micro nutrients, on tomato plants
The study showed that biomass gains of tomatoes were higher in hydroponics as compared to aquaponics, These findings indicated that foliar application of some elements can effectively alleviate nutrient deficiencies in tomatoes grown on aquaponics.
Silva, L. et al., 2015 Two aquaponic dynamic root floating technique (DRF) treatments were tested; one using pak choy as the hydroponic culture plant (PAK) and another using coriander (COR).
![Page 37: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/37.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
37 | P a g e
The Nile tilapia - pak choy treatment has better performance in biomass production and in water treatment than the Nile tilapia-coriander.
Afsharipoor, S. and Roosta, H.R., 2010
The investigation of the effect of different plant substrates (perlite/cocopeat) on strawberry growth and development in hydroponic and aquaponic systems
The results showed that most parameters were better in hydroponic systems and that the planting beds of only perlite were cocopeat were not suitable.
Roosta, H.R. and Afsharipoor, S., 2012
Testing different substrates (various ratios of perlite and cocopeat) in hydroponic and aquaponic cultivation systems.
In hydroponic system, the substrates of sole perlite or cocopeat were not recognized as optimum substrates; therefore, it is recommended to use their mixture as substrate, while in aquaponic system, the substrates with higher percentage of perlite had better performance and are recommended for strawberry cultivation.
Shete, A.P. et al., 2013 Testing varied water circulation periods
The change in the water circulation period has effect on the water quality, fish growth as well as plant growth.
Nuevaespana, J. and Matias, J.R., 2016
The physical profile evaluation of Klayton and Light Expanded Clay Aggregate (LECA), ceramic based growing media.
Klayton has higher water absorption per surface area as compared to LECA. High surface area provides more space for the growth of nitrifying bacteria.
Malini, G. et al., 2015 2 plant species;
2 water sources;
The relatively higher growth rate of the plants in aquaponic water is due to the presence of relatively higher rate of nitrogen compounds within it.
Delaide, B. et al., 2016 3 production systems;
The principal finding of this research was that aquaponic (AP) and hydroponic (HP) treatments exhibited similar plant growth, whereas the shoot weight of the complemented aquaponic (CAP) treatment showed a significant growth rate increase compared to the HP and AP treatments. Additionally, the root weight was similar in AP and CAP treatments, and both were significantly higher than that observed in the HP treatment.
Nozzi, V. et al., 2018 3 plant species;
2 production systems;
4 nutrient variants;
Lettuce achieved the highest yields in system C, mint in system B, and mushroom herb in systems A and B. The present study demonstrated that the nutritional requirements of the mint and mushroom herb make them suitable for aquaponic farming because they require low levels of supplement addition, and hence little management effort, resulting in minimal cost increases. While the addition of supplements accelerated the lettuce growth (Systems B,
![Page 38: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/38.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
38 | P a g e
C), and even surpassed the growth in hydroponic (System C vs. D), the nutritional quality (polyphenols, nitrate content) was better without supplementation.
Graber, A. and Junge, R., 2008 3 plant species;
The highest nutrient removal rates by fruit harvest were achieved during tomato culture, over a period of more than 3 months. In aquaponic, more than two thirds of nitrogen removal by the overall system could thus be converted into edible fruits. Plant yield in aquaponic production systems was similar to conventional hydroponic production systems.
Bittsanszky, A. et al., 2016 2 production systems;
Plants do thrive in solutions that have lower nutrient levels than “standard” hydroponic solutions. This is especially true for green leafy vegetables that rarely need additional nutritional supplementation. It is concluded that in the highly complex system of aquaponics, special care has to be taken, via continuous monitoring of the chemical composition of the circulating water, to provide adequate concentrations and ratios of nutrients, and special attention has to be paid to the potentially toxic component, ammonium. If certain plants require nutrient supplementation, we consider that one based on organic substances would be most beneficial.
Raja, S. et al., 2015 2 water sources;
The experiment conspicuously showed that influence of nutrients in the aquaponic water on the plant growth was higher than that of the ground water.
Schmautz, Z. et al., 2016 3 hydroponic techniques;
The results showed that the choice of the cultivation system had little influence on most of the above-mentioned properties. Tomato fruit mineral content was found to be in similar range for N, P, K, Ca, Mg, Fe, and Zn as reported in the literature. Yield and fruit quality were similar in all three systems. However, the drip irrigation system did perform slightly better.
Jordan, R.A. et al., 2018 4 media grow bed substrates;
The treatment with phenolic foam was considered as the least suitable for lettuce cultivation in aquaponic system, because it caused lower yield. The treatment using coconut shell fiber with crushed stone was considered as the most adequate, since it led to higher yield compared with the other substrates analyzed.
As result of Table 4, a graphic (Figure 17) of the 19 identified variables was created. It
can be noticed that the most common variables are: plant species, media grow bed
substrates, production technologies and production systems.
![Page 39: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/39.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
39 | P a g e
Figure 17. Percentages of the aquaponic systems variables
As a result of the above graphic (Figure 17), an experimental design was conceived
(Figure 18), and it involves the following variables:
1 plant (Lemon basil);
1 fish species (Nile tilapia);
1 artificial light source (SanLight LED grow lamp);
2 climate conditions (Temperature, humidity, solar radiation);
2 media grow bed substrates (light expanded clay aggregate (L.E.C.A.) and lava rock);
2 water flow regimes (continuous flow and flood-and-drain);
(Triplicate experimentation).
All this occupying the entire 24 aquaponic modules within the four built metallic frames.
![Page 40: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/40.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
40 | P a g e
Figure 18. Experimental design
Another graphic (Figure 19) was conceived to better illustrate the relations between
the variables and the other key elements that make up the aquaponic system.
The variables are categorized into: dependent variables, controlled variables and
independent variables.
Figure 19. Dependent, controlled and independent variables
![Page 41: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/41.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
41 | P a g e
Figure 20 displays the experimental sampling points, the array of the proposed analyzes and the sampling frequency for fish, plants and technologic water.
Figure 20. Sampling points, proposed analyzes and sampling frequency
The experimental design that resulted from this work package (WP6) will be
implemented as a practical experiment in order to obtain an aquaponic technology applicable
at an industrial level, to a large-scale aquaponic system.
References: 1. Addy, M.M., Kabir, F., Zhang, R., Lu, Q., Deng, X., Current, D., Griffith, R., Ma, Y., Zhou,
W., Chen, P. and Ruan, R. (2017). Co-cultivation of microalgae in aquaponic systems.
Bioresource Technology, 245, 27-34, doi.org/10.1016/j.biortech.2017.08.151
2. Afsharipoor, S., and Roosta, H. R. (2011). Effect of different planting beds on growth
and development of strawberry in hydroponic and aquaponic cultivation systems.
Plant Cell, 2(2010), 61–66.
3. Al-Hafedh, Y. S., Alam, A., Beltagi, M. S., AlHafedh, Y. S., Al-Hafedh, Y. S., Alam, A., and
Beltagi, M. S. (2008). Food production and water conservation in a recirulating
aquaponic system in Saudi Arabia at different ratios of fish feed to plants. Journal of
the World Aquaculture Society, 39(4), 510–520. https://doi.org/10.1111/j.1749-
7345.2008.00181.x
4. Aquaponics Guidelines (2015). 2nd printing November 2015, Printed by Haskolaprent,
Reykjavik, Iceland, ISBN: 978-9935-9283-1-3
![Page 42: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/42.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
42 | P a g e
5. Bittsanszky, A., Uzinger, N., Gyulai, G., Mathis, A., Junge, R., Villarroel, M., Kotzen, B.
and Komives, T. (2016). Nutrient supply of plants in aquaponic systems. Ecocycles 2(2):
17-20 (2016) ISSN 2416-2140, DOI: 10.19040/ecocycles.v2i2.57
6. Bradley, P. and Marulanda, C. (2001). Simplified hydroponics to reduce global hunger.
Acta Horticulture, 554, 289-296.
7. Cerozi, B.D.S. and Fitzsimmons, K. (2016). The effect of pH on phosphorus availability
and speciation in an aquaponics nutrient solution. Bioresource Technology, 219, 778-
781. doi.org/10.1016/j.biortech.2016.08.079
8. Dalsgaard, J., Lund, I., Thorarinsdottir, R., Drengstig, A., Arvonen, K. and Pedersen, P.B.
(2012). Farming different species in RAS in Nordic countries: Current status and future
perspectives. Aquacultural Engineering.doi:10.1016/j.aquaeng.2012.11.008
9. Dediu, L., Cristea, V., and Xiaoshuan, Z. (2012). Waste production and valorization in
an integrated aquaponic system with bester and lettuce. African Journal of
Biotechnology, 11(9), 2349–2358. https://doi.org/10.5897/AJB11.2829
10. Delaide, B., Delhaye, G., Dermience, M., Gott, J., Soyeurt, H. and Jijakli, M.H. (2017).
Plant and fish production performance, nutrient mass balances, energy and water use
of the PAFF Box, a small-scale aquaponic system. Aquacultural Engineering, 78, 130-
139, doi.org/10.1016/j.aquaeng.2017.06.002
11. Delaide, B., Goddek, S., Gott, J., Soyeurt, H., and Jijakli, M.H. (2016). Lettuce (Lactuca
sativa L. var. Sucrine) Growth Performance in Complemented Aquaponic Solution
Outperforms Hydroponics. Water 2016, 8, 467; doi:10.3390/w8100467
12. d'Orbcastel, E.R., Blancheton, J.P., Boujard, T., Aubin, J., Moutounet, Y., Przybyla, C.
and Belaud, A. (2008). Comparison of two methods for evaluating waste of a flow
through trout farm. Aquaculture 274, 72-79
13. Endut, A., Jusoh, A., Ali, N., Wan Nik, W. B., and Hassan, A. (2010). A study on the
optimal hydraulic loading rate and plant ratios in recirculation aquaponic system.
Bioresource Technology, 101(5), 1511–1517.
https://doi.org/10.1016/j.biortech.2009.09.040
14. Endut, A., Jusoh, A., Ali, N., Wan Nik, W. N. S., and Hassan, A. (2009). Effect of flow
rate on water quality parameters and plant growth of water spinach (Ipomoea
aquatica) in an aquaponic recirculating system. Desalination and Water Treatment,
5(1–3), 19–28. https://doi.org/10.5004/dwt.2009.559
15. Epstein, E. and Bloom, A.J., (2005). Mineral Nutrition of Plants: Principles and
Perspectives 2nd Edition. Sinauer Associates, Incorporated, Sunderland, MA, USA.
16. Fang, Y., Hu, Z., Zou, Y., Zhang, J., Zhu, Z., Zhang, J. and Nie, L. (2017). Improving
nitrogen utilization efficiency of aquaponics by introducing algal-bacterial consortia.
Bioresource Technology, 245, 358-364, doi.org/10.1016/j.biortech.2017.08.116
17. FAO (2014). Small-scale aquaponic food production, integrated fish and plant farming,
FAO Fisheries and Aquaculture Technical paper, Food and Agricultural Organization of
the United Nations
![Page 43: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/43.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
43 | P a g e
18. Fierro-Sañudo, J.F., Rodríguez-Montes de Oca, G.A., León-Cañedo, J.A., Alarcón-Silvas,
S.G., Mariscal-Lagarda, M.M., Díaz-Valdés, T. and Páez-Osuna F. (2018). Production
and management of shrimp (Penaeus vannamei) in co-culture with basil (Ocimum
basilicum) using two sources of low-salinity water. Lat. Am. J. Aquat. Res., 46(1): 63-
71, DOI: 10.3856/vol46-issue1-fulltext-8
19. Forchino, A.A., Lourguioui, H., Brigolin, D. and Pastres, R. (2017). Aquaponics and
sustainability: The comparison of two different aquaponic techniques using the Life
Cycle Assessment (LCA). Aquacultural Engineering 77:80-88.
20. Gh. Rafiee1 and Che Roos Saad The Effect of Natural Zeolite (Clinoptiolite) on
Aquaponic Production of Red Tilapia (Oreochromis sp.) and Lettuce (Lactuca sativa
var. longifolia), and Improvement of Water Quality J. Agric. Sci. Technol. (2006) Vol. 8:
313-322
21. Ghaly, A. E., Kamal, M., and Mahmoud, N. S. (2005). Phytoremediation of aquaculture
wastewater for water recycling and production of fish feed. Environment
International, 31(1), 1–13. https://doi.org/10.1016/j.envint.2004.05.011
22. Goddek, S. (2016). Three-loop aquaponics systems: chances and challenges. Proc.
Proceedings of the International Conference on Aquaponics Research Matters,
Ljubljana, Slovenia.
23. Goddek, S., Delaide, B., Mankasingh, U., Ragnarsdottir, K., Jijakli, M.H. and
Thorarinsdottir, R. (2015). Challenges of Sustainable and Commercial Aquaponics.
Sustainability 7(4):4199.
24. Goddek, S., Espinal, C., Delaide, B., Jijakli, M.H., Schmautz, Z., Wuertz, S. and Keesman,
K.J. (2016). Navigating towards Decoupled Aquaponic Systems: A System Dynamics
Design Approach. Water 8(7):303.
25. Graber, A., and Junge, R. (2008). Aquaponic Systems: Nutrient recycling from fish
wastewater by vegetable production. Desalination 246 (2009) 147–156,
doi:10.1016/j.desal.2008.03.048
26. Hambrey Consulting, Commissioned Report for New Zealand Aid Programme, Ministry
of Foreign Affairs and Trade (2013). The relevance of aquaponics to the New Zealand
aid programme, particularly in the Pacific, December 2013.
27. Hu, Z., Lee, J.W., Chandran, K., Kim, S., Brotto, A.C. and Khanal, S.K. (2015). Effect of
plant species on nitrogen recovery in aquaponics. Bioresource Technology 188:92-98.
28. Hussain, T., Verma, A. K., Tiwari, V. K., Prakash, C., Rathore, G., Shete, A. P., and
Saharan, N. (2014). Effect of water flow rates on growth of Cyprinus carpio var. koi
(Cyprinus carpio L., 1758) and spinach plant in aquaponic system. Aquaculture
International, 23(1), 369–384. https://doi.org/10.1007/s10499-014-9821-3
29. Jijakli, M.H., Delaide, B. and Gott, J. (2016). Plant production capacity and nutrient
mass balance in the PAFF Box, an urban aquaponics module: Preliminary findings.
Geography and Environment University of Southampton: Southampton, UK.
30. Jones, R., Ougham, H., Thomas, H. and Waaland, S. (2013). The molecular life of plants.
Wiley-Blackwell.
![Page 44: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/44.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
44 | P a g e
31. Jordan, R.A., Gersenhoff, L.O., de Oliveira, F.C., Santos, R.C. and Martins, E.A.S. (2018).
Yield of lettuce grown in aquaponic system using different substrates. Revista
Brasileira de Engenharia Agrícola e Ambiental, v.22, n.1, p.27-31, ISSN 1807-1929, DOI:
http://dx.doi.org/10.1590/1807-1929/agriambi.v22n1p27-31
32. Kloas, W., Groß, R., Baganz, D., Graupner, J., Monsees, H., Schmidt, U., Staaks, G., Suhl,
J., Tschirner, M., Wittstock, B., Wuertz, S., Zikova, A. and Rennert, B. (2015). A new
concept for aquaponic systems to improve sustainability, increase productivity, and
reduce environmental impacts. Aquaculture Environment Interactions, 7(2), 179–192.
https://doi.org/10.3354/aei00146
33. Knaus, U., and Palm, H. W. (2017). Effects of fish biology on ebb and flow aquaponical
cultured herbs in northern Germany (Mecklenburg Western Pomerania). Aquaculture,
466, 51–63. https://doi.org/10.1016/j.aquaculture.2016.09.025
34. Lennard, W. A., and Leonard, B. V. (2004). A comparison of reciprocating flow versus
constant flow in an integrated, gravel bed, aquaponic test system. Aquaculture
International. https://doi.org/10.1007/s10499-004-8528-2
35. Lennard, W. A., and Leonard, B. V. (2006). A comparison of three different hydroponic
sub-systems (gravel bed, floating and nutrient film technique) in an Aquaponic test
system. Aquaculture International, 14(6), 539–550. https://doi.org/10.1007/s10499-
006-9053-2
36. Licamele, J. (2009). Biomass production and nutrient dynamics in an aquaponics
system. A Dissertation Submitted to the Faculty of the Department of Agriculture and
Biosystems Engineering, The University of Arizona. In Partial Fulfillment of the
Requirements for the Degree of In the Graduate College, 1–172.
37. Malini, g., Raja, S., Selvanatham, P. and Dhanakkodi, B. (2015). Innovative organic
cultivation of Sorghum controversum and oryza sativa in aquaponic system.
Conference: National seminar on “Advances in basic and Clinical Immunology (abci-
2015)”, At Coimbatore, Volume: 1
38. Mamat, N.Z., Shaari, m.I. and Wahab, N.A.A.A. (2016). The Production of Catfish and
Vegetables in an Aquaponic System. Fisheries and Aquaculture Journal, 7:4, DOI:
10.4172/2150-3508.1000181,
39. McGuire, T.M. and Popken, G.A. (2015). Comparative Analysis of Aquaponic Grow
Beds. Environmental Studies Undergraduate Student Theses. Paper 143.
http://digitalcommons.unl.edu/envstudtheses/143
40. Medina, M., Jayachandran, K., Bhat, M. G., and Deoraj, A. (2016). Assessing plant
growth, water quality and economic effects from application of a plant-based
aquafeed in a recirculating aquaponic system. Aquaculture International, 24(1), 415–
427. https://doi.org/10.1007/s10499-015-9934-3
41. Murashige, T., Skoog, F. (1962). A Revised Medium for Rapid Growth and Bio Assays
with Tobacco Tissue Cultures. Physiol. Plant. 15, 473–497.
http://dx.doi.org/10.1111/j.1399-3054.1962.tb08052.x
![Page 45: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/45.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
45 | P a g e
42. Naylor, S.J., Moccia, R.D. and Durant, G.M. (1999). The chemical composition of
settleable solid fish waste (manure) from commercial Rainbow Trout farms in Ontario,
Canada. N. Am. J. Aquacult. 61, 21–26. [CrossRef]
43. Nozzi, V., Graber, A., Schmautz, Z., Mathis, A. and Junge, R. (2018). Nutrient
Management in Aquaponics: Comparison of Three Approaches for Cultivating Lettuce,
Mint and Mushroom Herb. Agronomy 2018, 8, 27; doi:10.3390/agronomy8030027
44. NUEVAESPANA, J., and MATIAS, J. R. (2016). Comparison of the physical profile of
Klayton and LECA as media for aquaponics, (April 2014).
45. Petrea, S.M., Cristea, V., Dediu, L., Contoman, M., Cretu, M., Antache, A., Coada, M.T.
and Bandi, A.C. (2014). A study of phosphorus and calcium dynamics in an integrated
rainbow trout and spinach (Nores variety) Aquaponic system with different crop
densities. Animal Science and Biotechnologies, 47, 2.
46. Petrea, S.M., Cristea, V., Dediu, L., Contoman, M., Lupoae, P., (Cretu) Mocanu, M. and
Coada, M.T. (2013). Vegetable production in an integrated aquaponic system with
rainbow trout and spinach. Bulletin of University of Agricultural Sciences and
Veterinary Medicine Cluj-Napoca. Animal Science and Biotechnologies, Vol 70, No 1
47. Pinho, S.M., Molinari, D., de Mello, G.M., Fitzsimmons, K.M. and Emerenciano, M.G.C.
(2017). Effluent from a biofloc technology (BFT) tilapia culture on the aquaponics
production of different lettuce varieties. Ecological Engineering, 103, 146-153,
doi.org/10.1016/j.ecoleng.2017.03.009
48. Raja, S., Gowtham, R., S., Selvanatham, P. and Dhanakkodi, B. (2015). Nutritional
influence of ornamental fish water Aquaponic system on the growth of Indigenous
plant, Eleusine coracana. National conference on Biosafety for health security, At
Cuddalore, Volume: 1.
49. Rakocy, J. and Hargreaves, J. (1993). Integration of vegetable hydroponics with fish
culture: a review. Techniques for Modern Aquaculture, Proceedings Aquacultural
Engineering Conference. American Society for Agricultural Engineers, St. Joseph, MI.
p. 112-136
50. Rakocy, J.E., Bailey, D.S., Martin, J.M. and Shultz, R.C. (2000). Tilapia production
systems for the Lesser Antilles and other resource-limited, tropical areas. pp. 651-662.
Tilapia Aquaculture in the 21st Century: Proceedings from the Fifth International
Symposium on Tilapia in Aquaculture, Rio de Janeiro, Brazil.
51. Rakocy, J.E., Losordo, T.M. and Masser, M.P. (1992). Recirculating Aquaculture Tank
Production Systems. Integrating Fish and Plant Culture. SRAC Publication: Stoneville,
MS, USA, pp. 1–8.
52. Rakocy, J.E., Shultz, R.C., Bailey, D.S. and Thoman, E.S. (2004). Aquaponic Production
of Tilapia and Basil: Comparing a Batch and Staggered Cropping System. Agricultural
Experiment Station University of the Virgin Islands, RR 2, Box 10,000, Kingshill, VI
00850, USA., Acta Horticulturae, 648, 63–69.
https://doi.org/10.17660/ActaHortic.2004.648.8
![Page 46: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/46.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
46 | P a g e
53. Rakocy, J.E., Shultz, R.C., Bailey, D.S. and Thoman, E.S. (2004). Aquaponic production
of tilapia and basil: comparing a batch and staggered cropping system. Acta
Horticulturae (ISHS) 648:63-69.
54. Resh, H.M. (2001). Hydroponic Food Production. Woodbridge Press Publishing
Company. Santa Barbra, CA 93012
55. Reyes Lastiri, D., Slinkert, T., Cappon, H. J., Baganz, D., Staaks, G., and Keesman, K.J.
(2016). Model of an aquaponic system for minimised water, energy and nitrogen
requirements. Water Sci Technol 74(1):30-37.
56. Roosta, H. R., and Afsharipoor, S. (2012). Effects of different cultivation media on
vegetative growth, ecophysiological traits and nutrients concentration in strawberry
under hydroponic and aquaponic cultivation systems. Advances in Environmental
Biology, 6(2), 543–555.
57. Roosta, H. R., and Hamidpour, M. (2013). Mineral Nutrient Content of Tomato Plants
in Aquaponic and Hydroponic Systems: Effect of Foliar Application of Some Macro-
and Micro-Nutrients. Journal of Plant Nutrition, 36(13), 2070–2083.
https://doi.org/10.1080/01904167.2013.821707
58. Saba, G.K. and Steinberg, D.K. (2012). Abundance, composition, and sinking rates of
fish fecal pellets in the Santa Barbara Channel. Sci. Rep., 2, 716. [CrossRef] [PubMed]
59. Sace, C. and Fitzsimmons, K. (2013). Vegetable production in a recirculating aquaponic
system using Nile tilapia (Oreochromis niloticus) with and without freshwater prawn
(Macrobrachium rosenbergii). Academia Journal of Agricultural Research 1(12):236-
250.
60. Salam, M., Jahan, N., Hashem, S., and Rana, K. (2015). Feasibility of tomato production
in aquaponic system using different substrates. Progressive Agriculture, 25(0), 54.
https://doi.org/10.3329/pa.v25i0.24075
61. Saufie, S., Estim, A., Tamin, M., Harun, A., Obong, S., and Mustafa, S. (2015). Growth
performance of tomato plant and genetically improved farmed Tilapia in combined
aquaponic systems. Asian Journal of Agricultural Research.
https://doi.org/10.3923/ajar.2015.95.103
62. Schmautz, Z., Loeu, F., Liebisch, F., Graber, A., Mathi, A., Bulc, T.G. and Junge, R (2016).
Tomato Productivity and Quality in Aquaponics: Comparison of Three Hydroponic
Methods. Water 2016, 8, 533; doi:10.3390/w8110533
63. Seawright, D. E., Stickney, R. R., and Walker, R. B. (1998). Nutrient dynamics in
integrated aquaculture-hydroponics systems. Aquaculture, 160(3–4), 215–237.
https://doi.org/10.1016/S0044-8486(97)00168-3
64. Selek, m., Endo, M., Yiğit, M. and Takeuchi, T. (2017), the integration of fish and plant
production: nile tilapia (Oreochromis niloticus) and basil (Ocimum basilicum) culture
in recirculating and aquaponic systems. Journal of Aquaculture Engineering and
Fisheries Research E-ISSN 2149-0236.
65. Shete, A. P., Verma, A. K., Tandel, R. S., Prakash, C., Tiwari, V. K., and Hussain, T. (2013).
Optimization of Water Circulation Period for the Culture of Goldfish with Spinach in
![Page 47: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/47.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
47 | P a g e
Aquaponic System. Journal of Agricultural Science, 5(4), 25–30.
https://doi.org/10.5539/jas.v5n4p26
66. Silva, L., Gasca-Leyva, E., Escalante, E., Fitzsimmons, K. M., and Lozano, D. V. (2015).
Evaluation of biomass yield and water treatment in two aquaponic systems using the
dynamic root floating technique (DRF). Sustainability (Switzerland), 7(11), 15384–
15399. https://doi.org/10.3390/su71115384
67. Simionov, I.A., Cristea, V., Petrea, S.M., Plavan, G., Nicoara, M. and Strungaru S.A.
(2017). Aquaponics awareness: a modern approach for limiting the aquaculture
environmental impact and improving productivity. Scientific Annals of “Alexandru
Ioan Cuza” University of Iasi, Animai Biology.
68. Sirakov, I., Velichkova, K., Stoyanova, S., Slavcheva-Sirakova, D., Staykov, Y. (2017).
Comparison between two production technologies and two types of substrates in an
experimental aquaponic recirculation system. Scientific Papers. Series E. Land
Reclamation, Earth Observation and Surveying, Environmental Engineering. Vol. VI,
Print ISSN 2285-6064, CD-ROM ISSN 2285-6072, Online ISSN 2393-5138, ISSN-L 2285-
6064
69. Somerville, C., Cohen, M., Pantanella, E., Stankus, A. and Lovatelli, A. (2014). Small
scale aquaponic. Food production. FAO Smart Fish Publication (FAO) eng no. 15.
70. Stankus, A. (2013). Integrating biosystems to foster sustainable aquaculture: Using
black soldier fly larvae as feed in aquaponic systems. Master Thesis, Zoology
Department, University of Hawai’i Manoa.
71. Taylor, P., Street, M., Wt, L., Tyson, R. V, Simonne, E. H., Davis, M., White, J. M. (2007).
Effect of Nutrient Solution, Nitrate-Nitrogen Concentration, and pH on Nitrification
Rate in Perlite Medium Effect of Nutrient Solution, Nitrate-Nitrogen Concentration,
and pH on Nitrification Rate in Perlite Medium, (786413994), 901–913.
https://doi.org/10.1080/15226510701375101
72. Timmons, M.B. and Ebeling, J.M. (2013). Recirculating Aquaculture. 3rd Edition, ISBN-
13: 978-0971264656, ISBN-10: 0971264651.
73. Timmons, M.B., Ebeling, J.M., Wheaton, F., Summerfelt, S. and Vinci, B. (2002),
Recirculating Aquaculture Systems. Northeastern Regional Aquaculture Center,
Cayuga Aqua Ventures, New York.
74. Trang, N., Schierup, H.-H., and Brix, H. (2010). Leaf vegetables for use in integrated
hydroponics and aquaculture systems: Effects of root flooding on growth, mineral
composition and nutrient uptake. African Journal of Biotechnology, 9(27), 4186–4196.
https://doi.org/10.4314/ajb.v9i27.
75. Trejo-Tellez, L.I. and Gomez-Merino, F.C. (2012). Nutrient Solutions for Hydroponic
Systems. Asao, T. (Ed.), Hydroponics - A Standard Methodology for Plant Biological
Researches. InTech. http://dx.doi.org/10.5772/2215
76. Wilkie, M.P. (1997). Mechanisms of ammonia excretion across fish gills. Comp.
Biochem. Physiol., 1, 39–50. [CrossRef]
![Page 48: Deliverables 6.1 Technical coordination](https://reader033.fdocuments.in/reader033/viewer/2022041600/6252bf8ba8a62b73cd7bd21c/html5/thumbnails/48.jpg)
645691 - ECOFISH Project MSCA-RISE-2014: Marie Sklodowska-Curie
48 | P a g e
77. Wilson, G. (2005). Australian barramundi farm goes aquaponic. Aquaponics Journal,
37, p.12–16.
78. Wongkiew, S., Hu, Z., Chandran, K., Lee, J.W. and Khanal, S.K. (2017). Nitrogen
transformations in aquaponic systems: A review. Aquacultural Engineering, 76, 9-19,
doi.org/10.1016/j.aquaeng.2017.01.004
79. Wongkiew, S., Popp, B.N., Kim, H.J. and Khanal, S.K. (2017). Fate of nitrogen in floating-
raft aquaponic systems using natural abundance nitrogen isotopic compositions.
International Biodeterioration & Biodegradation, 125, 24-32,
doi.org/10.1016/j.ibiod.2017.08.006
80. Zou, Y., Hu, Z., Zhang, J., Xie, H., Guimbaud, C. and Fang, Y. (2016). Effects of pH on
nitrogen transformations in media-based aquaponics. Bioresource Technology, 210,
81-87, doi.org/10.1016/j.biortech.2015.12.079