Delegated Decisions CEN - araco.org NL_08_09_2017/25/… · CEN/TC 147/WG 18 - Loader cranes 4....

DDD 34 2017 2017-08-21

CEN System - Delegated Decisions Dispatch 34:2017

1 CEN/TC 19 ...................................................................................................................................... 1 2 CEN/TC 54 ...................................................................................................................................... 3 3 CEN/TC 88 ...................................................................................................................................... 4 4 CEN/TC 112 .................................................................................................................................... 5 5 CEN/TC 147 .................................................................................................................................... 6 6 CEN/TC 169 .................................................................................................................................... 8 7 CEN/TC 191 .................................................................................................................................... 9 8 CEN/TC 193 .................................................................................................................................. 12 9 CEN/TC 227 .................................................................................................................................. 18 10 CEN/TC 251 .................................................................................................................................. 21 11 CEN/TC 252 .................................................................................................................................. 21 12 CEN/TC 256 .................................................................................................................................. 23 13 CEN/TC 260 .................................................................................................................................. 24 14 CEN/TC 278 .................................................................................................................................. 25 15 CEN/TC 444 .................................................................................................................................. 26

1 CEN/TC 19 Decision CEN/TC 19 03/2017 taken on 2017-08-15

Subject: Adoption of a New Work Item

CEN/TC 19 - Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin.

• having considered the proposal for a new work item as documented in CEN/TC 19 N 1878

• having considered the Guidance - Adoption of a new work item in a CEN Technical Committee as documented in the BOSS

• confirming that the new work item falls within its scope

• confirming that the new work item corresponds to real market needs

• confirming that the resources to complete the work below are available

• decides to register the work item described below in its active programme of work

Section Details

1. Deliverable TR

2. This item corresponds to

The revision of a CEN/TR CEN/TR 15993:2013

3. Document CEN/TC 19/WG 21 - Specification for unleaded petrol

DDD 34 2017 developed in drafting body

4. Title Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination

5. Scope This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to EN 15293. It provides background information to judge the text of the standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel. It also includes a summary of the investigations and interlaboratory studies executed and the discussions entertained by CEN that have led to the effective fuel specification. NOTE 1 This document is directly related to the pending revision of CEN/TS 15293 NOTE 2 For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

6. Environmental aspects

Other: This is a TR and therefore doesn't solve or address specific environmental aspects

7. How do you plan to address these environmental aspects?

Other: not applicable

8. Vienna Agreement

No or expected CEN lead

9. The project is linked to

No document from another organization

10. Track Vote on TS/TR by correspondence

11. Related mandate(s)

No

12. Related directive(s)

No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS SIS BSI NBN UNI NEN

14. The decision was taken by

Simple majority (min. 55% as from 2017-01-01) Number of positive votes: 21 Number of negative votes: 0 Number of abstentions: 13

DDD 34 2017 2 CEN/TC 54 Decision CEN/TC 54 6/2017 taken on 2017-08-17


CEN/TC 54 - Unfired pressure vessels • having considered the proposal for a new work item as documented in CEN/TC

54 N 1854






Section Details

1. Deliverable EN


An amendment to an EN EN 13445-5:2014

3. Document developed in drafting body

CEN/TC 54/WG 55 - E - Inspection and testing

4. Title Unfired pressure vessels - Part 5: Inspection and testing

5. Scope This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2014. Special provisions for cyclic operation are given in Annex G of this Part. Special provisions for vessels or vessel parts working in the creep range are given in Annex F and Annex I of this Part. NOTE The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7.


Emissions to air


Use of environmental checklist

8. Vienna No or expected CEN lead

DDD 34 2017 Agreement



10. Track Enquiry + Formal Vote (ENQ+FV)


Yes M/071


Yes Directive reference | For citation in Official journal 2014/68/EU | Yes

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR BSI DIN UNI NEN


Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):100 Number of positive votes: 14 Number of negative votes: 0 Number of abstentions: 9

3 CEN/TC 88 Decision CEN/TC 88 763c/2017 taken on 2017-08-14

Subject: 3 year time-frame for the development of WI 00088330 - 9 month Tolerance Request.

CEN/TC 88 - Thermal insulating materials and products • considering Resolution BT 34/2002 by which BT decided that any work item to result in

an EN, registered after 2002-10-31, shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes;

• considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, to claim one tolerance of 9 months, applicable to the target dates for submission of a draft to CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA);

• considering that for work item 00088330 - - Thermal insulation products for buildings - External thermal insulation composite systems with renders (ETICS) - Specification, it proves impossible to Dispatch ENQ draft to CMC by 2017-07-14;

• claims a tolerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons:

DDD 34 2017

Further time is needed to solve all the comments received during the internal commenting period.

• confirms that CEN/TC 88 will Dispatch ENQ draft to CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by 2018-04-14 at the latest.

The decision was taken by simple majority with 15 positive vote(s), 0 negative vote(s) and 8 abstention(s).



CEN/TC 112 Wood-based panels • having considered the proposal for a new work item as documented in CEN/TC

112 N 2104






Section Details

1. Deliverable EN


The revision of an EN EN 622-4:2009


CEN/TC 112/WG 11 - Particleboards and fibreboards

4. Title Fibreboards - Specifications - Part 4: Requirements for softboards

5. Scope This European Standard specifies the requirements for softboards as defined in EN 316, with a density - 230 kg/m3 to 400 kg/m3. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.


Emissions to air

DDD 34 2017 7. How do you plan to address these environmental aspects?

Bring in environmental expertise to the WG

8. Vienna Agreement






No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR ASI SNV DIN NBN





CEN/TC 147 - Cranes - Safety • having considered the proposal for a new work item as documented in CEN/TC

147 N 1055





DDD 34 2017


Section Details

1. Deliverable EN


The revision of an EN EN 12999:2011/A2:2017


CEN/TC 147/WG 18 - Loader cranes

4. Title Cranes - Loader cranes

5. Scope This European Standard specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations. This European Standard does not apply to loader cranes used on board seagoing vessel or to articulated boom systems which are designed as total integral parts of special equipment such as forwarders. The hazards covered by this standard are identified in Clause 4. This European Standard does not cover hazards related to the lifting of persons


Emissions to air Heat Noise/Vibration Use of energy Use of land Use of materials Waste Risk to the environment from accidents/misuse


Bring in environmental expertise to the WG Use of environmental checklist

8. Vienna Agreement






Yes M/396


Yes Directive reference | For citation in Official journal

DDD 34 2017

2006/42/EC | Yes

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS DIN DS UNI NEN


Weighted vote and simple majority Percentage of positive weighted votes (min. 71% before 2017-01-01, min. 65% from 2017-01-01):91.67 Number of positive votes: 12 Number of negative votes: 1 Number of abstentions: 11


Subject: Adoption of a Preliminary Work Item

CEN/TC 169 - Light and lighting • having considered the proposal for a new work item as documented in CEN/TC

169 N 1475






Section Details

1. Deliverable TR


A new TR


CEN/TC 169/WG 3 - Emergency lighting in buildings

4. Title Guidance Notes on the use of dynamic signage systems

DDD 34 2017 5. Scope Emergency lighting which is designed to operate when the supply to

the normal lighting fails. There is a need for a system that can cope with changing conditions such as the presence of fire, smoke or other dangers to provide a system that enables people to use safe escape routes not only during supply failures but at all times the premises are occupied. Furthermore, such systems can also indicate escape routes which should not be used to avoid dangers. There are systems that can receive signals from detectors and human intervention that can automatically activate emergency escape signage-s to direct people to safe areas and indicate the routes that are not fit for use. Such systems are called dynamic signage systems (DSS). The purpose of this CEN Technical Report is to give guidance to the design considerations of DSS.

6. Environmental aspects - OPTIONAL

7. How do you plan to address these environmental aspects? - OPTIONAL



No


No


Simple majority Number of positive votes: 17 Number of negative votes: 0 Number of abstentions: 7



CEN/TC 191 - Fixed firefighting systems • having considered the proposal for a new work item as documented in CEN/TC

191 N 1396



DDD 34 2017




Section Details

1. Deliverable EN


An amendment to an EN EN 16750:2017


CEN/TC 191/WG 6 - Gas extinguishing Systems and components

4. Title Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance

5. Scope This European standard specifies oxygen reduction systems that are used as fire prevention systems by creating an atmosphere in an area which is having a lower permanent oxygen concentration as in ambient conditions. The level of oxygen reduction is defined by the individual risks of these areas (see Annex A). Oxygen reduction is achieved by technical systems which are providing a flux of air containing a reduced concentration of oxygen. This European standard specifies minimum requirements and defines the specifications governing the design, installation and maintenance of fixed oxygen reduction systems with oxygen reduced air in buildings and industrial production plants. The standard also applies to the extension and modification of existing systems. This European standard applies to oxygen reduction systems using nitrogen which are designed for continual oxygen reduction in enclosed spaces. NOTE Nitrogen is today the most suitable gas to be used for oxygen reduction. For other gases this European standard can be used as basis. This European standard does not apply to oxygen reduction systems that use water mist or combustion gases. The European standard does not apply to: - explosion suppression systems; - explosion prevention systems; - fire extinguishing systems using gaseous extinguishing agents; - inertization of portable containers; - systems in which oxygen levels are reduced for reasons other than fire prevention (e.g. steel processing in the presence of inert gas to avoid the formation of oxide film); - inerting required during repair work on systems or equipment (e.g. welding) in order to eliminate the risk of fire or explosion. In addition to the conditions for the actual oxygen reduction system and its individual components this European standard also covers certain structural specifications for the protected area.

DDD 34 2017

The space protected by an oxygen reduction system is a controlled and continuously monitored indoor climate for extended occupation. This standard does not cover unventilated confined spaces that may contain hazardous gases.


Emissions to air



8. Vienna Agreement






No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SFS ASI SIS SN BSI DIN UNI NEN ILNAS



DDD 34 2017 8 CEN/TC 193 Decision CEN/TC 193 4C/2017 taken on 2017-04-06


CEN/TC 193 - Adhesives • having considered the proposal for a new work item as documented in CEN/TC

193 N 1994






Section Details

1. Deliverable EN


A new project


CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures

4. Title Classification of wood adhesives for non-structural timber products for exterior use

5. Scope To be provided





No


No

DDD 34 2017 11. The decision was taken by


Decision CEN/TC 193 4D/2017 taken on 2017-04-06



193 N 1994






Section Details

1. Deliverable EN


A new project


CEN/TC 193/SC 1/WG 6 - Test methods and requirements for adhesives for glued-in rods and on-site repair of load-bearing structures

4. Title Adhesives - Epoxy resins for load bearing timber structures - Classification and performance requirements

5. Scope To be provided





No

DDD 34 2017 10. Related directive(s)

No



Decision CEN/TC 193 5A/2017 taken on 2017-04-06



193 N 1994






Section Details

1. Deliverable EN


The revision of an EN EN 14259:2003


CEN/TC 193/WG 4 - Building adhesives

4. Title Adhesives for floor coverings - Requirements for mechanical and electrical performance

5. Scope This European Standard specifies performance requirements of an adhesive when tested to a standard method with a characteristic type of floor covering. The values defined in this standard are considered to indicate a general suitability for use of an adhesive with the corresponding group of floor coverings. This standard can also be used for the evaluation of a particular floor covering with the corresponding type of adhesive. This standard does not contain criteria or recommendations for the practical installation of floor coverings. The values given in this standard also do not guarantee the complete functionality of combinations of adhesives and floor coverings in practical application.

DDD 34 2017 6. Environmental aspects - OPTIONAL




No


Yes Directive reference | For citation in Official journal 305/2011 | No



Decision CEN/TC 193 5-2/2017 taken on 2017-04-06



193 N 1994






Section Details

1. Deliverable EN


The revision of an EN EN 14293:2006


CEN/TC 193/WG 4 - Building adhesives

DDD 34 2017 4. Title Adhesives - Adhesives for bonding parquet to subfloor - Test methods

and minimum requirements

5. Scope This European Standard specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength and tensile strength to be achieved with these adhesives, as well as a method for determining the open time. there are two different test methods and different minimum requirements for determing the shear strength for hard and soft adhesives. This Standard does not refer to the selection and installation of parquet floorings.





No


No



Decision CEN/TC 193 15bis/2017 taken on 2017-05-05



193 N 1998






DDD 34 2017 Section Details

1. Deliverable EN


A new project


CEN/TC 193/SC 1/WG 12 - Adhesives for non-loadbearing timber structures

4. Title Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading

5. Scope This European Standard specifies a method for adhesives for wood and derived solid wood products for determining the shear strength and wood failure percentage of wood-to-wood adhesive bonds loaded in compression. These parameters allow to define different working properties of adhesives (e.g. final bond strength, pressing time, closed assembly time).





No


No



DDD 34 2017 9 CEN/TC 227 Decision CEN/TC 227 837/2017 taken on 2017-08-11


CEN/TC 227 - Road materials • having considered the proposal for a new work item as documented in CEN/TC

227 N 2869






Section Details

1. Deliverable EN


The revision of an EN EN 12697-31:2007


CEN/TC 227/WG 1 - Bituminous mixtures

4. Title Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor

5. Scope This European Standard specifies the method for compaction of cylindrical specimens of bituminous mixtures using a gyratory compactor. Such compaction is achieved by combining a rotary shearing action and a vertical resultant force applied by a mechanical head. The method is used for: - determination of the air voids content of a mixture for a given number of gyrations or derivation of a curve density (or void content) versus number of gyrations; - preparation of specimens of given height and/or at a predetermined density, for subsequent testing of their mechanical properties. Annex A, Annex B and/or Annex C describe method of complying for the equipment This European Standard applies to bituminous mixtures (both those made up in laboratory and those resulting from work site sampling), with an upper aggregate size not larger than 31,5 mm.

6. Environmental Use of energy

DDD 34 2017 aspects Use of materials



8. Vienna Agreement






Yes M/124



13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SIS SN BSI SNV DIN NBN UNI EVS



Decision CEN/TC 227 838/2017 taken on 2017-08-11


CEN/TC 227 - Road materials • having considered the proposal for a new work item as documented in CEN/TC

227 N 2872





DDD 34 2017


Section Details

1. Deliverable EN


The revision of an EN EN 12697-32:2003+A1:2007


CEN/TC 227/WG 1 - Bituminous mixtures

4. Title Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

5. Scope This European Standard describes a test method for the preparation of bituminous test specimens using a vibratory compaction technique. This European Standard is applicable to loose mixtures and cores and is used to establish a refusal density for a bituminous mixture, or to determine the ease of compaction as described in EN 12697-10. If the mixture has been reheated, the specimen shall not be used for determining further mechanical characteristics.


Use of energy Use of materials



8. Vienna Agreement






Yes M/124



13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: SIS SN BSI DIN

DDD 34 2017

NBN UNI



10 CEN/TC 251

DECISION 1109 taken by CEN/TC 251 on 2017-08-15

Subject: CEN/TC 251 – Participation of HL7 International Foundation

The CEN/TC 251 Health informatics.

• considering the CEN/CENELEC Internal Regulations - Part 2, subclause 4.3.2, which lays down the conditions for external liaisons;

• considering that the conditions laid down in CEN-CENELEC Guide 25 “The concept of partnership with European organizations and other stakeholders” are fulfilled;

• agrees to the participation of the HL7 International Foundation in CEN/TC 251;

• requests the CEN-CENELEC Management Centre to inform the HL7 International Foundation accordingly of this decision.

The decision was taken by simple majority with 8 positive votes, 0 negative vote(s) and 16 abstentions.

11 CEN/TC 252 Decision CEN/TC 252 439 a/2017 taken on 2017-08-12


CEN/TC 252 - Child care articles • having considered the proposal for a new work item as documented in CEN/TC

252 N 1528





DDD 34 2017


Section Details

1. Deliverable TR


The revision of a CEN/TR CEN/TR 13387-2:2015


CEN/TC 252/WG 6 - General and common safety specifications

4. Title Child use and care articles - General safety guidelines - Part 2: Chemical hazards

5. Scope This document provides guidance information on chemical hazards that should be taken into consideration when developing safety standards for child use and care articles. In addition, these guidelines can assist those with a general professional interest in child safety.


None of the above: TR


Other: NA

8. Vienna Agreement






No


No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: ASI SIS BSI DIN UNI



DDD 34 2017 12 CEN/TC 256 Decision CEN/TC 256 C23/2017 taken on 2017-08-16

Subject: Activation of preliminary Work Item 00256765

CEN/TC 256 - Railway applications • having considered the proposal for the activation of work item 00256765

currently registered at preliminary stage 00.60 as documented in CEN/TC 256 N 5345






Section Details

1. Deliverable EN


A new project


CEN/TC 256/WG 3 - Acoustics

4. Title Railway applications - Acoustics - Measuring of door audible warnings

5. Scope This European standard describes the type test assessment method for acoustic signals at passenger external doors applying to rolling stock. The following applies to this standard: - this standard refers to acoustical passenger information indicating the release, opening and closing of passenger doors; - this standard is applicable to tonal signals with defined frequency components; - this standard is not applicable to spoken information. NOTE 1 Acoustic door signals in terms of TSI compliance are defined in EN 16584-2 "Design for PRM use". NOTE 2 Acoustic doors signals in terms of door system function are described in EN 14752.


Use of energy



DDD 34 2017 8. Vienna Agreement






Yes M/483


Yes Directive reference | For citation in Official journal 2008/57/EC | Yes

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR LST BSI SNV DIN UNE UNI NEN HZN IPQ



13 CEN/TC 260 Decision CEN/TC 260 C661/2017 taken on 2017-08-04

Subject: Deletion of a Work Item neither mandated nor covered by an Order Voucher

CEN/TC 260 Fertilizers and liming materials • having received and agreed upon the reasons why harmonization is no longer

needed;

• considering that the work item(s) are neither mandated nor covered by an Order Voucher;

• noting the consequences of release of standstill;

decides to delete the following work item(s):

DDD 34 2017

WI 00260185 prEN 15477 - Fertilizers - Determination of the water-soluble potassium content

and decides to release the standstill on these work item(s).



Subject: CEN/TC 278 - Splitting of existing work item

CEN/TC 278 Intelligent transport systems • considering the CEN/CENELEC Internal Regulations - Part 3, clause 5, which lay

down the provisions for the division of subjects to be standardized;

• considering the urgent and exceptional need for splitting a work item;

• confirming that the resources needed to achieve the work are committed;

• confirming that the scopes of the new work items resulting from the splitting are strictly within the scope of the original work item;

decides to split the WI -00278464 - Intelligent transport systems - eSafety - extending eCall to other classes of vehicle - into 5 parts, with the following titles and tracks:

Title: Intelligent transport systems - eSafety - Part 1: extending eCall to other categories of vehicle Scope: The scope of this project is to extend eCall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Title: Intelligent transport systems - eSafety - Part 2: eCall for HGVs and other commercial vehicles Scope: The scope of this project is to extend eCall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - eSafety - Part 3: eCall for coaches and busses Scope: The scope of this project is to extend eCall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence Title: Intelligent transport systems - eSafety - Part 4: eCall for UNECE Category T, R, S agricultural/forestry vehicles Scope: The scope of this project is to extend eCall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence

DDD 34 2017 Title: Intelligent transport systems - eSafety - Part 5: eCall for UNECE Category L1 and L3 powered two wheel vehicles (vehicle based) Scope: The scope of this project is to extend eCall to other classes of vehicle, including HGVs, P2WVs, busses and coaches and agricultural/forestry vehicles. Track: Vote on TS/TR by correspondence




CEN/TC 444 - Test methods for environmental characterization of solid matrices • having considered the proposal for a new work item as documented in CEN/TC

444 N 94






Section Details

1. Deliverable TR


A new TR


CEN/TC 444/WG 3 - Inorganic analysis

4. Title Waste - State-of-the-art document - Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection

5. Scope This technical report provides a supplementary description of the oxidative pyrohydrolytic combustion technique followed by ion chromatography detection for the determination of halogens and sulfur in waste samples.


Waste

7. How do you plan Bring in environmental expertise to the WG

DDD 34 2017 to address these environmental aspects?

8. Vienna Agreement






No


Yes Directive reference | For citation in Official journal 99/31/EC | No 2000/76/EC | No

13. Commitment The following CEN members (at least five) are committed to participate in the development of the project: AFNOR SFS SNV DIN NBN NEN UNMZ



Delegated Decisions CEN - araco.org NL_08_09_2017/25/… · CEN/TC 147/WG 18 - Loader cranes 4....

Documents

Transcript of Delegated Decisions CEN - araco.org NL_08_09_2017/25/… · CEN/TC 147/WG 18 - Loader cranes 4....