Delay Turning Center Programming, Setup, & Operation Copyright 2001, CNC Concepts, Inc.

Turning Center Programming, Setup, & Operation

CNC Turning Center Programming, Setup, & Operation

Lesson 1: Machine configurations (17:00 )

Lesson 3: Flow of CNC usage (12:15)

Lesson 4: Visualizing program execution (10:00)

Lesson 5: Understanding program zero (14:00)

Lesson 6: Locating the program zero point (11:00)

Lesson 7: Ways to assign program zero (10:00)Lesson 8: Intro to programming words (15:00)

Lesson 9: The importance of preparation (14:00)

List of Lessons

Lesson 10: Motion types (14:00)

Programming

Click on a topic!Click on a topic!

Course orientation (6:30)

Lesson 16: Four kinds of format (10:00)

Lesson 24: Setup & operation tasks (12:00)Lesson 25: Buttons & switches (15:00)

Lesson 26: Three modes of operation (8:00)

Lesson 27: Key operation procedures (15:00)

Lesson 28: Safely verifying programs (21:00)

Setup & operation

Lesson 2: Speeds and feeds (11:00)

Lesson 21: Sub-programming techniques (9:00)

Lesson 22: Control model differences (5:00)Lesson 23: Other special features (15:00)

Lesson 11: Introduction to compensation (10:00)

Lesson 12: Geometry offsets (6:00)

Lesson 13: Wear offsets (19:00)

Lesson 14: Tool nose radius compensation (12:00)Lesson 15: Intro to program formatting (12:00)

Lesson 17: One-pass canned cycles (5:00)Lesson 18: Rough & finish turning & boring (17:00)Lesson 19: More multiple repetitive cycles (8:00)

Lesson 20: G76 – threading cycle (18:00)

Important presentations from programming

Almost six hours of material!

Demo only: Only lesson 1 is active

Click here first!

Lesson 1: Machine Configurations

Introduction to key concept number one

Outline

Click on a topic!Click on a topic!

Machine configurationsProgrammable features

Basic machining practice

Start from:View entire lesson

Demo only: Only Machine configurations is active

Machine Configurations

There are many forms of CNC turning centers…

Universal slant bed Chucker slant bed Twin spindle horizontal Single spindle vertical Twin spindle vertical Mill/turn machines Gang type Sliding headstock

In all cases…X will be the diameter controlling axisZ will be the length controlling axis

There are many forms of CNC turning centers…

Universal slant bed Chucker slant bed Twin spindle horizontal Single spindle vertical Twin spindle vertical Mill/turn machines Gang type Sliding headstock

In all cases…X will be the diameter controlling axisZ will be the length controlling axis

Universal style slant bed turning center

Headstock & Spindle

Work-holding Device

Tailstock

BodyQuill

Center

Turret

A universal slant bed turning center can perform all types of turning applications:

Chucker workShaft workBar work

Z Axis- +

Delay Turning Center Programming, Setup, & Operation Copyright 2001, CNC Concepts, Inc.

Documents

Transcript of Delay Turning Center Programming, Setup, & Operation Copyright 2001, CNC Concepts, Inc.