Defense Trade Advisory Group (DTAG) Plenary Session Working Group No. 3 Report July 7, 2010.
Defense Trade Advisory Group (DTAG) Licensing Process
description
Transcript of Defense Trade Advisory Group (DTAG) Licensing Process
Defense Trade Advisory Group (DTAG)
Licensing Process
Plenary SessionMay 3, 2011
Licensing Process Working Group Members
2
Dave Bowman MeritorDennis Burnett EADS, North American DefenseRebecca ConoverIntel CorporationKim DePew General Electric CompanyAndrea Dynes General Dynamics CorporationChuck Graves Day & Zimmerman, Inc.Greg Hill DRS TechnologiesDave Isenberg Norwegian Initiative on Small ArmsLarry Keane National Shooting Sports FoundationDave Kelly Bluefin RoboticsKrista Larsen FLIR Systems, Inc.Spence Leslie Tyco InternationalBrenda Nicacio Nivisys IndustriesDale Rill Honeywell InternationalJanet Rishel Bell HelicopterJay Rodriguez MAC AerospaceSam Sevier MK TechnologyJoy Speicher Space Systems/Loral Inc.
3
Determine how the USG should implement the [licensing] policy guidance for tiers 2 and 3 in the International Traffic in Arms Regulations to include recommended regulatory language for the “authorizing mechanisms” and “license exceptions”.
Proposed solutions must address how the exporter will: • Ensure the configuration and capabilities of the defense
articles/services proposed for export are consistent with technology and other not necessarily public security policies (LO/CLO, Anti-Tamper, NDP, etc).
• Provide verification of the legitimacy of the export at the port of debarkation.
• Ensure that, when required, end-use or other assurances are obtained prior to export.
• Provide information to the USG to meet its requirements for tracking and follow up on those exports that must be reported to various international fora (UN Arms Registry, etc), as well as statutory reporting (655 report).
DTAG Working Group Assigned Task
4
DTAG Working Group Assigned Task Continued
Tier 2Worldwide license requirement for all exports and re-exports, to include a variety of authorizing mechanisms, with license exceptions for U.S. Munitions List (USML) defense articles to certain government end-users/end-uses in countries that are close allies and regime adherents, NATO-plus. Tier 3Worldwide license requirement for all exports and re-exports, to include a variety of authorizing mechanisms, with license exceptions for USML defense articles to certain government and other end-users/end-uses. [Excluding §126.1 countries]
5
…Note: Items that move from USML to CCL could be as tightly controlled under the EAR or equally tiered with the same licensing policy.
Task Approach
6
Obtain Export AuthorizationObtain Export Authorization
Comply w/ pre-shipment
authorization requirements & provisos; execute TAA,MLA,WDA
Comply w/ pre-shipment
authorization requirements & provisos; execute TAA,MLA,WDA
Lodge License with Customs (as applicable)
Lodge License with Customs (as applicable)
Preparedraft of commercialInvoice (include
license #)
Preparedraft of commercialInvoice (include
license #)
File AES, CBP decrements license (include license #)
File AES, CBP decrements license (include license #)
Shipping packs product alongwith paperwork
Shipping packs product alongwith paperwork
Freight Forwarder picks up packageFreight Forwarder picks up package
Shipping completes Air Way Bill or
Shippers Letter of Instruction
Shipping completes Air Way Bill or
Shippers Letter of Instruction
Decrement license value /quantity
Decrement license value /quantity
Retain export recordsRetain export recordsFormal Authorization Required
Formal Authorization Required
Shipment executedShipment executed
Post shipment reporting activitiesPost shipment
reporting activities
Congressional Reporting as required to issue authorization
Congressional Reporting as required to issue authorization
Apply for Export Authorization
Apply for Export Authorization
Exemption applicable?Exemption applicable?
Pre Export Activities Export Activities Post Export Activities
Preserve Authorization obtainmentRecords
Preserve Authorization obtainmentRecords
Comply w/exemption requirements
Comply w/exemption requirements
Tangible or Intangible Export?
Tangible or Intangible Export?
Tangible
Intangible
Start End
Current Process
Decrement license value /quantity
Decrement license value /quantity
7
License Exemption Framework
• Qualifiers to determine eligibility • Technical data, defense service (including agreements), and
manufacturing applicability
• Additional recordkeeping requirements/needed system modifications
• End-user and other assurances
• Reexports/retransfers
• Impact on registration requirements
• Relationship to other exemptions
8
Eligibility Qualifications
NEW ITAR License exemption is created for eligible defense article systems, components, parts, assemblies, software, technical data, and defense services controlled under Tier 2 and Tier 3 as follows: Tier 2 items are eligible for export to NATO, NATO agencies, and NATO-plus foreign government end users only.
Please note: Many foreign government purchase orders are placed through third parties. Therefore, it would be helpful if DTC would consider modifying the proposed rule to allow use of third party purchase orders whereby the goods are destined for foreign governments provided the following requirements are met:
1) the exporter obtains a letter or other certification from the foreign government certifying the “trusted agent” is authorized to order parts/components on their behalf; and 2) a copy of that letter/certification is maintained on file with each “trusted agent” Purchase Order stating the end-user is the foreign government who has issued the “trusted agent” letter/certification.
9
Eligibility Qualifications Continued
Tier 3 items are eligible for export to all countries, except those countries prohibited under ITAR 126.1 or other export restriction (e.g. denied parties).
... normal due diligence for the proposed transaction must be completed
10
Eligibility Qualifications Continued
Assumptions:
1. Based on the published definition of Tier 1, items are not eligible. 2. Based on the published definition of Tier 2 and the published proposed Category VII, the articles (end-items and components), we assume that most articles that it will include are items that are within the above cited release policies for NATO-plus countries.
11
Eligibility Qualifications Continued
Assumptions Continued:
3. Based on the published of Tier 3 and the published proposed Category VII, we assume that Tier 3 will be void of any items that meet the above policies for world-wide release, minus 126.1 country destinations.
4. Hardware, technical data, software, defense services, etc. will be tiered according to the USML category review. For example, technical data used in design may be put in a more restrictive tier than the item itself or the technical data used in the operation of the item.
12
Items Not Eligible
The DDTC would continue to require licenses for certain items.
For Example:
(1) All Missile Technology Control Regime (MTCR) Annex items.
(2) Any transaction involving the export of items for which congressional notification is required in accordance with §123.15 and §124.11 of this subchapter. (3) Any item moved to a higher tier of control at the discretion of the USG.
13
Proposed Language
§ 126.16 (Name of the new exemption) (a) A license from the Directorate of Defense Trade Controls is not required for the export of Tier 2 or Tier 3 items as follows except as noted in §126.16 (b):
(1) Tier 2 items may be exported to NATO, NATO agencies, NATO-plus foreign government end users.
(2) Tier 2 items may be exported to “trusted agents” provided both of the following are met:
(i) the exporter obtains a letter or other certification from the foreign government certifying the “trusted agent” is authorized to order parts/components on their behalf; and
(ii) a copy of that letter/certification is maintained on file with each “trusted agent” Purchase Order stating the end-user is the foreign government who has issued the “trusted agent” letter/certification.
14
Proposed Language Continued
(3) Tier 3 items are eligible for export to all countries, except those countries prohibited under ITAR 126.1 or other export restriction (e.g. denied parties).
(b) The following items identified in 22 CFR §121.1 will continue to require a license from DTC:
(1) All Missile Technology Control Regime (MTCR) Annex items.(2) Any transaction involving the export of items for which congressional notification is required in accordance with §123.15 and §124.11 of this subchapter.
(c) All required end use assurances must be obtained prior to the export of an item when using this exemption.
15
Our team reviewed recordkeeping from two aspects:1.What exporter must maintain in their files2.What exporter must submit to the USG for reporting purposes
Exporter’s internal files…ITAR §122.5 …must maintain records concerning the manufacture, acquisition and disposition (to include copies of all documentation on exports using exemptions and applications and licenses and their related documentation), of defense articles; of technical data; the provision of defense services…
Additional details regarding recordkeeping for technical data exports are included in ITAR §123.26 and §125.6 No change is recommended on the actual requirements for the exporter to maintain local records.
Exporter’s submitted information… When using the license exemption, the exporter will be required to provide information, as applicable, to the USG to enable required reporting to international fora, congress, etc.
Recordkeeping
16
• Quantity• Dollar value• Date of export• Recipient country• Party of ultimate destination• Country of ultimate destination• Exemption “number”• Fees and commissions paid• SME or not • SME items being manufactured• Name and country of manufacture for all SME items• Detailed ITAR list number – new designators for items on positive list
DTC Reporting Requirements
17
Recordkeeping Continued
Challenge: How will exporters provide this information to DDTC?
Several Viable Solutions Reviewed and Discussed:
The DTAG recommends further review of current IT systems used to support export license applications (i.e., D-TRADE) and census reporting (i.e., AES) to determine the feasibility of streamlining requirements into a “Single information-technology system.”
• Consistent with one of the four reform initiatives set forth by the current Administration; create a “single IT system” to reduce redundancies and incompatibilities of the current system comprised of multiple database products.
• The exporter would be required to submit the information needed for reporting with each export made under the exemption (for technical data and software for initial export only)
Note: Reports could be developed to validate exporter due diligence, calculate quantities of exports, etc.
18
Exporter determines if license/exemption
applies
Exporter determines if license/exemption
applies
Upon submission of data, immediately receive automatic “exemption transaction number”
Upon submission of data, immediately receive automatic “exemption transaction number”
Proceed with export under exemption – insert transaction number into AES and/or record on export documents
Proceed with export under exemption – insert transaction number into AES and/or record on export documents
Record exemption through new version
of D-Trade
Record exemption through new version
of D-Trade
Start
End
License
Exemption
Complete standard D-
Trade Licensing Process
Apply for license in D-
Trade
Apply for license in D-
Trade
Dept of State collects data as
required
Proposed Exemption Recordkeeping – D-Trade
Examples of Required Data:End User NameEnd User CountryItem DescriptionUSMLQuantityValueDate of ExportMethod of Export
Examples of Required Data:End User NameEnd User CountryItem DescriptionUSMLQuantityValueDate of ExportMethod of Export
Example
Or AES or other IT system
19
Multiple ways of meeting these requirements today. Fulfill the requirement via…
- DSP-83- End-Use / End-User Certificates - Destination Control Statement- A letter from ally government to USG - NATO agreements/diplomatic notes, etc.- Another agreement between company and foreign government
Exporter may not use exemption until obtained (must also be maintained)
The burden of proof continues to be on the exporter
… end-user/assurances requirements still apply, no change to what we do today
End-User and Other Assurances
20
Registration Requirements
Registration is an independent issue (i.e. out of scope) relative to the licensing process and proposed exemption. There would be a reduction to industry registration requirements as a direct result of a positive control list and the implementation of the proposed “defense services” definition since many items/activities would be removed from the current USML.
21
Re-exports/Retransfers
Concept:
Defense articles eligible for export under the new ITAR license exemption are similarly eligible for re-export or retransfer under the ITAR license exemption, subject to certain limitations and requirements.
Scope of the re-export authorization is consistent with initial export authorization under the license exemption
Limitations:
Only for Tier 2 and Tier 3 defense articles
Only for authorized end-users and countries listed in exemptionE.g., Tier 2 defense article exported under license exemption to a governmental end user in a NATO-plus country can only be re-exported under the license exemption to another governmental end user in another NATO-plus country.
22
Re-exports/Retransfers Continued
Requirements:Written notification requirement to DDTC 30 days following the re-export or retransfer (similar to approach under current 123.9 (e) {re-exports of U.S.-origin defense articles incorporated into a foreign defense article to NATO-plus}
Proposed ITAR language:Modify current 123.9 {Country of ultimate destination and approval of re-exports or retransfers}
23
§ 123.9 Country of ultimate destination and approval of reexports or retransfers.
Re-exports/Retransfers Continued
(a) The country designated as the country of ultimate destination on an application for an export license, or on a Shipper's Export Declaration where an exemption is claimed under this subchapter, must be the country of ultimate end-use. The written approval of the Directorate of Defense Trade Controls must be obtained before reselling, transferring, transshipping, or disposing of a defense article to any end user, end use or destination other than as stated on the export license, or on the Shipper's Export Declaration in cases where an exemption is claimed under this subchapter, except as provided in [subparagraphs (e) or (f) of this section]. Exporters must ascertain the specific end-user and end-use prior to submitting an application to the Directorate of Defense Trade Controls or claiming an exemption under this subchapter.
(b) The exporter shall incorporate the following statement as an integral part of the bill of lading, and the invoice whenever defense articles on the U.S. Munitions List are to be exported: These commodities are authorized by the U.S. Government for export only to [country of ultimate destination] for use by [end-user]. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporate into other end-items, without the prior written approval of the U.S. Department of State [or satisfying the notification requirements specified in subparagraphs (e) or (f) of this section].
24
Re-exports/Retransfers Continued
(c) A U.S. person or a foreign person requesting approval for the reexport or retransfer, or change in end-use, of a defense article shall submit a written request which shall be subject to all the documentation required for a permanent export license (see §123.1) and shall contain the following:
(1) The license number under which the defense article was previously authorized for export from the United States;(2) A precise description, quantity and value of the defense article;(3) A description of the new end-use; and(4) Identification of the new end-user.
(d) The written approval of the Directorate of Defense Trade Controls must be obtained before reselling, transferring, transshipping on a non-continuous voyage, or disposing of a defense article in any country other than the country of ultimate destination, or anyone other than the authorized end-user, as stated on the Shipper's Export Declaration in cases where an exemption is claimed under this subchapter, except as provided in [subparagraphs (e) or (f) of this section].
(e) Reexports or retransfers of U.S.-origin components incorporated into a foreign defense article to NATO, NATO agencies, a government of a NATO country, or the governments of Australia, Japan, New Zealand, or South Korea…..
§ 123.9 Country of ultimate destination and approval of reexports or retransfers. (cont)
25
Re-exports/Retransfers Continued
(f) Reexports or retransfers of a U.S.-origin defense article lawfully exported from the United States under a license exemption provided in §126.16 may be reexported under the provisions of this subparagraph without the prior written approval of the Directorate of Defense Trade Controls, pursuant to the following requirements:
(1) Reexports and retransfers of U.S.-origin defense articles lawfully exported under license exemption §126.16(x) [(“Tier 2”)]. U.S.-origin defense articles lawfully exported under license exemption §126.16(x) to an authorized end-user and end-use identified in §126.16(x) located in any NATO-plus country [or any other country that is identified in Country Group xx under the provisions of §xxx.xx] may be reexported or retransferred to another authorized end-user and end-use (identified in [§126.16(x) located in any NATO-plus country [or any other country that is identified in Country Group xx under the provisions of §xxx.xx] without the prior written approval of the Directorate of Defense Trade Controls, provided that:
(i) [reserve for DDTC to specify any limitations on any specific defense articles not eligible for license-free reexports/retransfers within Tier 2 - NATO-plus countries];(ii) The person reexporting the defense article must provide written notification to the Directorate of Defense Trade Controls of the reexport or retransfer not later than 30 days following the reexport. The notification must state the articles being reexported, the recipient [government] end-user, end-use and country of destination; and(iii) In certain cases, the Managing Director, Directorate of Defense Trade Controls or the Director, Office of Defense Trade Controls Licensing, may place reexport or retransfer restrictions on the use of this exemption.
§ 123.9 Country of ultimate destination and approval of reexports or retransfers. (cont)
26
Re-exports/Retransfers Continued
(2) Reexports and retransfers of U.S.-origin defense articles lawfully exported under license exemption §126.16(x) [(“Tier 3”)]. U.S.-origin defense articles lawfully exported under license exemption §126.16(x) to an authorized governmental or other end-user and end-use identified in §126.16(x) and located in [any country not identified in §126.1] [or any other country that is identified in Country Group xx under the provisions of §xxx.xx] may be reexported or retransferred to another authorized end-user and end-use (identified in §126.16(x) located in any country located in [any country not identified in §126.1] [or any other country that is identified in Country Group xx under the provisions of §xxx.xx] without the prior written approval of the Directorate of Defense Trade Controls, provided that:
(i) [reserve for DDTC to specify any limitations on any specific defense articles not eligible for license-free reexports/retransfers within Tier 3 countries]; (ii) The person reexporting the defense article must provide written notification to the Directorate of Defense Trade Controls of the reexport or retransfer not later than 30 days following the reexport. The notification must state the articles being reexported, the recipient end-user, end-use and country of destination; and (iii) In certain cases, the Managing Director, Directorate of Defense Trade Controls or the Director, Office of Defense Trade Controls Licensing, may place reexport or retransfer restrictions on the use of this exemption.
§ 123.9 Country of ultimate destination and approval of reexports or retransfers. (cont)
27
Relationship to Other Exemptions
Existing exemptions would remain, but likely be used less often due to tiered licensing and removal of items from the USML.
The DTAG reviewed current ITAR export license exemptions and believes that the creation of a new license exemption:
• would not preclude the use of any exemption currently established in the ITAR; and,
• could replace other certain license exemptions.
Some exemptions could be modified to reference the proposed §126.16 exemption, such as DTAG has proposed in §123.9(f).
It appears as though the use of very few exemptions would be adversely impacted under the tiered categories. Once the tiering activities are done, all current exemptions need to be reviewed for any possible impact.
28
Remaining Concerns for Further Consideration
Could not abate all risks for use of exemption
Need “positive list” description for all categories
Not privy to USG critical items and all foreign policy
Possible risk for exporting large quantities of end items in tier 3
29
Takeaways From the Exercise
Items that won’t change with addition of exemptionNumber of ITAR exports will not changeDue diligence by exporter still requiredEnd use assurances still requiredUse of other exemptions still allowedUSG will have same visibility on items exported
Positive impact from adding exemptionDDTC can focus on critical exports…licensing, post-shipment validationsReduces effort by all parties to process non-contentious licenses
Defense Trade Advisory Group (DTAG)
Questions?