doverals.com

DOVER ARTIFICIAL LIF T FBU TMX® RSR® FIREBLADE™ WELDER PRO-ROD®

Practical and Cost EffectiveAr tificial Lif tSolutions

DEDICATED TO SOLVING THE WORLDS TOUGHEST OIL AND GAS PRODUCTION CHALLENGES

Dover Artificial Lift offers a comprehensive line of artificial lift equipment, accessories and services strategically designed to drive the operational excellence of each of our clients. Weprovide industry-leading systems and components engineeredto enhance the profitability of gas lift, plunger lift, rod lift, progressing cavity pump applications and surfaceproduction, as well as state-of-the-art softwareand products in thewell automation, analysis,and optimization space.

NPS Middle East LLC.PO Box 1429, Ruwi 112, Muscat Oman

doverals.com

DOVER ARTIFICIAL LIF T FBU TMX® RSR® FIREBLADE™ WELDER PRO-ROD

Practical and Cost EffectiveAr tificial Lif tSolutions

DEDICATED TO SOLVING THE WORLDS TOUGHEST OIL AND GAS PRODUCTION CHALLENGES

Dover Artificial Lift offers a comprehensive line of artificial lift equipment, accessories and services strategically designed to drive the operational excellence of each of our clients. Weprovide industry-leading systems and components engineeredto enhance the profitability of gas lift, plunger lift, rod lift, progressing cavity pump applications and surfaceproduction, as well as state-of-the-art softwareand products in thewell automation, analysis,and optimization space.

NPS Middle East LLC.PO Box 1429, Ruwi 112, Muscat Oman

TMX® (TRUCK MOUNTED X-CELERATOR®)

FBU (FLUSH-BY UNIT) RSR® (RAPID SERVICE RIG)

The Truck Mounted X-celerator ® (TMX) is a versatile piece of well servicing equipment that has a closed loop hydraulic system and has been specially designed for running continuous coiled rod of all sizes. The standard TMX unit comes with a Sucker Rod BOP, Safety Brake, Rod Stripper and Fireblade™ Welder. The TMX unit is able to adapt and work with any other onsite well servicing rig, FBU, or unit requiring continuous rod support. The unit is capableof repairing continuous failed rod strings aswell as installing custom length strings,tapered rod strings and welding pin endsall to of our customers specifications.The TMX is a cost savings on its ownwith the ability to service multiple wellsites in a short time, with minimalsurface imprint and a quick rig upand rig out time along with minimalsupport staff. The applicationsfor this specific unit are as followsbut not limited to pulling andrunning continuous rod strings,fishing, changing out PCP,plunger, and insert pumps andrunning diagnostic tools fordown hole applications.

Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Run and pull coiled sucker rod and all associated equipment as well as repair with the state of the art Fire Blade welder• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs• Run custom lengths of continuous rods, along with weld splices, and pin ends to customer specifications with the Fireblade™ Welder

The Flush-By Unit ( FBU) is designed for shallow to medium depth horizontal and vertical oil wells along steam injector wells, with absolute considerations for extreme operating conditions. The FBU, is a standalone unit that has been specifically designed to be the first diagnostic piece of well servicing equipment to reach the wellsite. It is a self-sufficient unit with a small footprint that is easily mobilized with a quick response. The standard FBU comes fitted with a 50’ Mast and hoist rated for 50,000 Lbs, 50 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, or can be specially designed to fit our client’s needs. All of our units come equipped with standard rod tongs, and sucker rod BOP, along with all of the fishing tools needed for conventional rod string applications. As well as all the required tools for the handling of conventional rods and bottom hole pumps. The FBU is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion of new wells allowing for cost savings,

The Rapid Service Rig is designed for shallow to medium depth horizontal and vertical oil wells and steam injector wells, with absolute considerations for extreme operating conditions. The RSR, is a standalone Rapid Service Rig that is self-sufficient with a small footprint and a rapid response time. The standard RSR comes fitted with a 65’ mast and hoist rated for 65,000 Lbs, 60 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, X-cellerator ® with a speed of up to 120 feet per min at 30,000 lbs, rod tongs, BOP, and fishing tools for all sizes of conventional rod, and continuous rod. Along with all the required tools for handling of conventional rod or continuous rod. The RSR is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion ofnew wells allowing for cost savings, increasedproduction and faster turnaround times.The RSR is designed with safetyas a number one priority withmany fail safe systems builtinto the design to insure thatall operating parametersare met prior to any jobbeing started.

increased production and faster turnaround times. The FBU is one of the best investigative and diagnostic tools that can be utilized in early detection and prevention of down hole issues, allowing for early repairs. Our units are designed with safety as a number one priority with many fail safe systems built into the design to insure that all operating parameters are met prior to any job being started. Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement and chemical stimulations• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs, and various down hole tools• Killing Wells

X-250

Maximum Pull(lbs)

30,000

Maximum Speed(ft/min)

120

Depth CounterSystem

Electronic &Manual

X-350

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

120

Depth CounterSystem

Electronic &Manual

X-450 (Open Faced)

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

100

Depth CounterSystem

Electronic &Manual

TMX® (TRUCK MOUNTED X-CELERATOR®)

FBU (FLUSH-BY UNIT) RSR® (RAPID SERVICE RIG)

The Truck Mounted X-celerator ® (TMX) is a versatile piece of well servicing equipment that has a closed loop hydraulic system and has been specially designed for running continuous coiled rod of all sizes. The standard TMX unit comes with a Sucker Rod BOP, Safety Brake, Rod Stripper and Fireblade™ Welder. The TMX unit is able to adapt and work with any other onsite well servicing rig, FBU, or unit requiring continuous rod support. The unit is capableof repairing continuous failed rod strings aswell as installing custom length strings,tapered rod strings and welding pin endsall to of our customers specifications.The TMX is a cost savings on its ownwith the ability to service multiple wellsites in a short time, with minimalsurface imprint and a quick rig upand rig out time along with minimalsupport staff. The applicationsfor this specific unit are as followsbut not limited to pulling andrunning continuous rod strings,fishing, changing out PCP,plunger, and insert pumps andrunning diagnostic tools fordown hole applications.

Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Run and pull coiled sucker rod and all associated equipment as well as repair with the state of the art Fire Blade welder• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs• Run custom lengths of continuous rods, along with weld splices, and pin ends to customer specifications with the Fireblade™ Welder

The Flush-By Unit ( FBU) is designed for shallow to medium depth horizontal and vertical oil wells along steam injector wells, with absolute considerations for extreme operating conditions. The FBU, is a standalone unit that has been specifically designed to be the first diagnostic piece of well servicing equipment to reach the wellsite. It is a self-sufficient unit with a small footprint that is easily mobilized with a quick response. The standard FBU comes fitted with a 50’ Mast and hoist rated for 50,000 Lbs, 50 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, or can be specially designed to fit our client’s needs. All of our units come equipped with standard rod tongs, and sucker rod BOP, along with all of the fishing tools needed for conventional rod string applications. As well as all the required tools for the handling of conventional rods and bottom hole pumps. The FBU is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion of new wells allowing for cost savings,

The Rapid Service Rig is designed for shallow to medium depth horizontal and vertical oil wells and steam injector wells, with absolute considerations for extreme operating conditions. The RSR, is a standalone Rapid Service Rig that is self-sufficient with a small footprint and a rapid response time. The standard RSR comes fitted with a 65’ mast and hoist rated for 65,000 Lbs, 60 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, X-cellerator ® with a speed of up to 120 feet per min at 30,000 lbs, rod tongs, BOP, and fishing tools for all sizes of conventional rod, and continuous rod. Along with all the required tools for handling of conventional rod or continuous rod. The RSR is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion ofnew wells allowing for cost savings, increasedproduction and faster turnaround times.The RSR is designed with safetyas a number one priority withmany fail safe systems builtinto the design to insure thatall operating parametersare met prior to any jobbeing started.

increased production and faster turnaround times. The FBU is one of the best investigative and diagnostic tools that can be utilized in early detection and prevention of down hole issues, allowing for early repairs. Our units are designed with safety as a number one priority with many fail safe systems built into the design to insure that all operating parameters are met prior to any job being started. Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement and chemical stimulations• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs, and various down hole tools• Killing Wells

X-250

Maximum Pull(lbs)

30,000

Maximum Speed(ft/min)

120

Depth CounterSystem

Electronic &Manual

X-350

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

120

Maximum Speed(ft/min)

Electronic &Manual

X-450 (Open Faced)

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

100

Depth CounterSystem

Electronic &Manual

TMX® (TRUCK MOUNTED X-CELERATOR®)

FBU (FLUSH-BY UNIT) RSR® (RAPID SERVICE RIG)

The Truck Mounted X-celerator ® (TMX) is a versatile piece of well servicing equipment that has a closed loop hydraulic system and has been specially designed for running continuous coiled rod of all sizes. The standard TMX unit comes with a Sucker Rod BOP, Safety Brake, Rod Stripper and Fireblade™ Welder. The TMX unit is able to adapt and work with any other onsite well servicing rig, FBU, or unit requiring continuous rod support. The unit is capableof repairing continuous failed rod strings aswell as installing custom length strings,tapered rod strings and welding pin endsall to of our customers specifications.The TMX is a cost savings on its ownwith the ability to service multiple wellsites in a short time, with minimalsurface imprint and a quick rig upand rig out time along with minimalsupport staff. The applicationsfor this specific unit are as followsbut not limited to pulling andrunning continuous rod strings,fishing, changing out PCP,plunger, and insert pumps andrunning diagnostic tools fordown hole applications.

Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Run and pull coiled sucker rod and all associated equipment as well as repair with the state-of-the-art Fireblade™ Welder• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs• Run custom lengths of continuous rods, along with weld splices, and pin ends to customer specifications with the Fireblade™ Welder

The Flush-By Unit ( FBU) is designed for shallow to medium depth horizontal and vertical oil wells along steam injector wells, with absolute considerations for extreme operating conditions. The FBU, is a standalone unit that has been specifically designed to be the first diagnostic piece of well servicing equipment to reach the wellsite. It is a self-sufficient unit with a small footprint that is easily mobilized with a quick response. The standard FBU comes fitted with a 50’ Mast and hoist rated for 50,000 Lbs, 50 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, or can be specially designed to fit our client’s needs. All of our units come equipped with standard rod tongs, and sucker rod BOP, along with all of the fishing tools needed for conventional rod string applications. As well as all the required tools for the handling of conventional rods and bottom hole pumps. The FBU is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion of new wells allowing for cost savings,

The Rapid Service Rig is designed for shallow to medium depth horizontal and vertical oil wells and steam injector wells, with absolute considerations for extreme operating conditions. The RSR, is a standalone Rapid Service Rig that is self-sufficient with a small footprint and a rapid response time. The standard RSR comes fitted with a 65’ mast and hoist rated for 65,000 Lbs, 60 BBl fluid tank for work over fluids, positive displacement triplex pump capable of pumping up to 6 BBl/min @ 3,000 Psi, X-cellerator ® with a speed of up to 120 feet per min at 30,000 lbs, rod tongs, BOP, and fishing tools for all sizes of conventional rod, and continuous rod. Along with all the required tools for handling of conventional rod or continuous rod. The RSR is a versatile piece of equipment that can be used to repair, and restore wells with lost production as well as assist in the completion ofnew wells allowing for cost savings, increasedproduction and faster turnaround times.The RSR is designed with safetyas a number one priority withmany fail safe systems builtinto the design to insure thatall operating parametersare met prior to any jobbeing started.

increased production and faster turnaround times. The FBU is one of the best investigative and diagnostic tools that can be utilized in early detection and prevention of down hole issues, allowing for early repairs. Our units are designed with safety as a number one priority with many fail safe systems built into the design to insure that all operating parameters are met prior to any job being started. Some of the services that can be completed with this unique specialized rig are:

• New well completions• Pull, pickup, and run conventional sucker rod• Install sinker bars• Space out rod strings• Stroke testing• Quick down hole pump changes of PCP and or reciprocating pumps• Perform sucker rod fishing jobs• Reactive flushing of tubing or casing• Proactive production flushes• Corrosion inhibitor displacement and chemical stimulations• Pressure testing• Stuffing box and polish rod changes• Other surface equipment maintenance• Investigative/diagnostic tool• Run various tools in or out of tubing such as punches, plugs, and various down hole tools• Killing Wells

X-250

Maximum Pull(lbs)

30,000

Maximum Speed(ft/min)

120

Depth CounterSystem

Electronic &Manual

X-350

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

120

Depth CounterSystem

Electronic &Manual

X-450 (Open Faced)

Maximum Pull(lbs)

50,000

Maximum Speed(ft/min)

100

Depth CounterSystem

Electronic &Manual

doverals.com

DOVER ARTIFICIAL LIF T FBU TMX® RSR® FIREBLADE™ WELDER PRO-ROD

Practical and Cost EffectiveAr tificial Lif tSolutions

DEDICATED TO SOLVING THE WORLDS TOUGHEST OIL AND GAS PRODUCTION CHALLENGES

Dover Artificial Lift offers a comprehensive line of artificial lift equipment, accessories and services strategically designed to drive the operational excellence of each of our clients. Weprovide industry-leading systems and components engineeredto enhance the profitability of gas lift, plunger lift, rod lift, progressing cavity pump applications and surfaceproduction, as well as state-of-the-art softwareand products in thewell automation, analysis,and optimization space.

NPS Middle East LLC.PO Box 1429, Ruwi 112, Muscat Oman