KISTNER GmbH & Co. KG

Industriestraße 7-9 D-95349 Thurnau

Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de

DECKEL FP3 NC

LIST OF CONTENTS

Machine info …………………………………………………….………………………….………..…….…………………………………..…..……….

Equipment …………………………………………………………………………………………………….……..………………………………….………

Technical data ………………………………………………………………………..………….………..……………………………..….…………. Machine pictures ……………………………………………………………………….………………………………………………….……….

Transport data ………………………………………………………………………………………………………………………………….……….

3 4 5 9 11

DECKEL FP3 NC | | 2

2

MACHINE INFO

| 3

Manufacturer

Type

Year of manufacture

Control

Machine number

General overhauled

DECKEL FP3 NC |

2 Machine vices – Manufactured by WNT Model NCG Collet chuck kit

approx. 20 Tool holders Electronic handwheel Machine housing Folding head horizontal / Vertical Coolant device Drilling and milling quill User guide / Documentation Machine parameters on CD

| 4

EQUIPMENT

DECKEL FP3 NC |

| 5

TECHNICAL DATA

Work area

X-axis (longitudinal)

Y-axis (cross)

Z-Achse (vertical) a) with angular table without slatted cover b) with angular table with slatted cover c) with universal table d) with NC-rotary table

Vertical milling head

Quill

Swivel range

DECKEL FP3 NC |

| 6 DECKEL FP3 NC |

Main drive Controlled asynchronous motor

Power Speed range Speed infinitely programmable

vertical

horizontal Torque Available at the spindle (included degree of efficiency)

vertical

horizontal

| 7 DECKEL FP3 NC |

Feed drive Regulated AC motors for all axis carriage

Torque / speed X-, Y- axis

Torque / speed Z-axis

Collision protection-coupling in the Z-axis

Feed speed infinitely programmable

metric

Zoll-System

Rapids

metric

Zoll-System Measuring system Direct measuring

Resolution

4. axis

Input resolution

metric

Zoll-System

4. axis Table sliders 1 groove

Width

Screwing for table accessories

Permissible loading Tool holder Tool clamping through plate spring assembly, hydraulic release, tool holder SK 40 for tool shanks

with pull studs

| 8 DECKEL FP3 NC |

Dimensions Floor area requirements (with security area)

Machine weight, incl. angle table, vertical milling head, electrical device and control

Cabinet

Operating voltage

Power consumption

Ground floatation

MACHINE PICTURES

| 9 DECKEL FP3 NC |

| 10 DECKEL FP3 NC |

TRANSPORT DATA

| 11 DECKEL FP3 NC |

Transport weight Machine without packaging

Machine during delilvery with transport floor with box

Cabinet without packaging with packaging Transport dimensions (approx.) Machine (LxWxH)

Transport floor (LxWxH)

Transport box (LxWxH) Required width of the door (WxH) approx.

| 12 DECKEL FP3 NC |

Empty the coolant tank and disconnect from the machine

Move the cabinet from the machine. Do not disconnect the electrical connection yet, if the machine has still to be balanced.

Required tools: 2 transport logs.

Remove the tool from the

spindle.

Move down carefully the table slides and locate them

on the transport log.

Turn down the vertical milling head and screw into the

spindle bracket.

Turn the control panel to the machine and secure with

clamp from twisting

Thank you very much for your interest

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*