DECEMBER 2018 KNX LED Dimmer UD/S€¦ · Webinar “KNX LED Dimmer UD/S” December 6, 2018 Slide...

DECEMBER 2018

KNX LED Dimmer UD/SWebinar – Competence Center Europe – Building Automation

Ilija Zivadinovic, Martin Wichary, Juergen Schilder, Thorsten Reibel, Stefan Grosse

Motivation and Goals

General Product Information

Main functions and benefits

December 6, 2018 Slide 2

Agenda

—Webinar “KNX LED Dimmer UD/S”Motivation and Goals

Motivation and goals

Webinar “KNX LED Dimmer UD/S”


LED lamps and LED luminaires have become integral parts of lighting applications

The market requires a reliable KNX dimmer to control LED ballasts without having negative effects like flickering, glowing in switched off state or uneven dimming characteristics

Why?

LED

Motivation and goals



KNX dimmer optimized for retrofit LED lamps (LEDi),

Close the gap of reliably controlling different LED ballasts over KNX

Simplify and speed-up parameterization

Simplify commissioning and on-site operation

Offer a dependable core product in a KNX installation

Increase customer satisfaction, sales figures and market share

Goals

Main Applications



Applications in residential buildings:

• Realize a warm and cozy atmosphere in the living room by dimming the light down

• Dimming the light in the bathroom:

• bright light for making up in the morning

• darker, relaxing light to take a bath in the evening

Applications in commercial buildings:

• Realize constant light control in offices

• Dim down the light in meeting rooms when presentations are held

Typical application examples

—Webinar “KNX LED Dimmer UD/S”General Product Information




LED Dimmer 4-fold/6-fold, 210W/VA

Outputs: 4

Rated power: 2 – 210 W/VA

Dimensions: 90 mm x 108 mm x 64 mm

Mounting depth: 64 mm

Module width: 6 MW

Power supply: 110 – 230 V AC +/- 10%, 50/60 Hz

LED Dimmer 4-fold/6-fold, 210W/VA

Article code Order code BJE/ABB

UD/S4.210.2.11 2CKA006197A0046 BJE

UD/S4.210.2.1 2CKA006197A0047 ABB

Outputs: 6

Rated power: 2 – 210 W/VA

Dimensions: 90 mm x 140 mm x 64 mm

Mounting depth: 64 mm

Module width: 8 MW

Power supply: 110 – 230 V AC +/- 10%, 50/60 Hz

4-fold 6-fold

Article code Order code BJE/ABB

UD/S6.210.2.11 2CKA006197A0048 BJE

UD/S6.210.2.1 2CKA006197A0049 ABB

Coming Soon

Coming Soon

Coming Soon




Different types of loads as well as automatic load detection selectable

All standard dimming parameters like brightness values, lower and upper dimming limits, dimming speed, feedback objects, etc.

Channel bundling to increase the connectable load per channel

Copyable channel templates to save time in programming

Easy scene concept as it is known from ABB´s new DALI gateways

Free-adjustable dimming curve correction

Generator-operation

Automatic load detection after power failure can be switched off

Staircase lighting, delay and further logical functions

i-bus Tool usable for easy commissioning and diagnostic function

Update via KNX bus (App “KNX Bus Update Tool”)

etc.

Main Functions

i-bus Tool




Several testing, diagnostic and failure feedback possibilities can be used with the i-bus Tool, e.g.

Testing of the different dim modes

Trying different min and max values when adjusting the lamps

What kind of failure has occurred?

Which channel is effected

Etc.

i-bus Tool

i-bus Tooli-bus Tool




Functionality: Reliable dimming of all types of lamps and LED ballasts no flickering, no glowing, constant dimming behavior

Minimum load of only 2W

One separate N per channel

Automatic load detection (deselectable)

Simplicity: new on-site operation; quicker parameterization

Competitive pricing

4x210W; channel bundling possible

USPs

—Webinar “KNX LED Dimmer UD/S”Main Functions and Benefits

Main Functions and Benefits



Easy channel bundling to increase the rated power:

Nominal power at 230 V~ mains voltage:

– 230 V~ incandescent and halogen lamps: 4 x 210 W/VA to 1 x 600 W/VA

– Dimmable 230 V~ LEDi: 4 x 210 W/VA to 1 x 600 W/VA in trailing edge control, 4 x 80 W/VA to 1 x 200 W/VA in leading edge control

– Inductive L-transformers with low-voltage LED/ halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA

– Electronic C-transformers with low-voltage LED/ halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA

– Electronic LC-transformers with low-voltage LED/ halogen lamp: 4 x 80 W/VA to 1 x 200 W/VA

Channel allocation




General Settings:

Manual operation: default enabled

Easy manual operation according to the conventional dimmer

Ripple control signal filter:

Filter should be turned off for generator-operation, e.g. on a ship

Device settings




In many cases each dimmer channel is configured as all other channels

With the new LED Dimmer only 1 master template has to be configured. All other channels can be copied by the master channel or be configured individual. This saves a lot of time!

The following parameter information are valid for each dimmer channel

(Note: individual = default settings)

Parameter masters

Copied frommaster:

Individual:




Load Detection:

Automatic load detection

LED angle

LED section and loads with RC behavior

Incandescent lamp section

Inductive load angle

Transition behavior:

Linear or Logarithmic (better adapted to human perception abilities)

Parameter masters – Basic Settings




Detailed parameters for switch-on/off behavior

Switch-on value (0%-100% or last value)

Dimming time reached up to switch-on/off/value:

00:00:00 Jump to value

00:00:08 SoftstartSeconds from zero to switch-on/off value (for values <32s depending DIN EN 62 386-102 “Fade Time”)

Dimming time for relative dimming function: time from 0% to 100% with relative dimming

Parameter masters – Basic Settings: Switch




Detailed parameters for switch-on/off behavior

Switch-on value (0%-100% or last value)

Dimming time reached up to switch-on/off/value:

00:00:00 Jump to value

00:00:08 SoftstartSeconds from zero to switch-on/off value (for values <32s depending DIN EN 62 386-102 “Fade Time”)

Dimming time for relative dimming function: time from 0% to 100% with relative dimming

Parameter masters – Basic Settings: Dim




Status communication objects for switching and dimming value.

Error diagnosis as KNX standard bit field (8 codes) or error number (13 errors)

Flexible sending cycle

Flexible definition, which errors trigger the communication object “Error”

Parameter masters – Feedback and Error messages




Settings for dimmer behavior in case of a fault

Status of the dimmer after loss of KNX or mains voltage

Status of the dimmer after return of voltage

Automatic load test can be repeated

Communication object for load test (can also be activated manual on the device)

Central objects for:

– Switching

– Dimming

– Value

Parameter masters – Fault / Central functions

Faults:

Centralobjects:




Dimming curve correction:

For problem cases.

New principle:

Use up to 4 correction points to adjust the dimming curve. Dimming curve will be optimized to a linear transition behavior.

Only enter the real lux values. Dimmer is correcting the characteristic automatically.

Parameter masters – Correction of characteristic




Parameter masters – Correction of characteristic




Easy configuration for up to 32 scenes.

Clear set-up for each scenes

Individual transition time for each scene

Enable communication object “Scene”:

Call and store the scene with 1 byte

Scenes

(Note: all 64 KNX scenes can be used!)




Up to 5 channels for common functions:

Telegram cyclical

Gate

Staircase lighting

Delay

Common functions




i-bus Tool




Clear overview of all channels

Overview of the detected load type

Information force lock

i-bus Tool




Trigger load test and error acknowledged

Detailed information about error types

Recommended solution

i-bus Tool




Commissioning: simple testing of the dimming range limits + the optimum operating mode

i-bus Tool



LED Dimmer 4-fold/6-fold, 210W/VALED Dimmer 4-fold/6-fold, 210W/VA

Coming Soon

Coming Soon

December 6, 2018 Folie 31

KNX Certified Training 2019

Certified KNX Courses in Heidelberg

– Basic Course : 18th to 22nd Feb.

– Advanced Course: 22nd to 26th Jul.

– Tutor Course: 09th to 13th Sep.

– Basic Course : 21st to 25th Oct.

– Followed by two day application training

And many more training courses in the calendar “International Training Dates 2019”

www.abb.com/knx or https://go.abb/ba-training

Webinar “KNX LED Dimmer UD/S”Training

Certified KNX Basic Course February 2018 in Heidelberg

http://www.abb.com/knx

https://go.abb/ba-training

December 6, 2018 Folie 32

New free@home SysAP 2.0

free@home - System Access Point 2.0

free@home has evolved continuously since its introduction in 2014. In the last four years a total of 16 firmware updates were provided for new and existing free@home customers free of charge. These added features are however taxing the recourses of the System Access Point (processing & memory). By introducing a revamped hardware platform for our System Access Point, we are laying the foundation to carry forward the approach of continuous improvement.

Wednesday 12th December 2018

– Morning 09:00 am Europe Time (Berlin, UTC + 1h)

– Afternoon 03:00 pm Europe Time (Berlin, UTC + 1h)

Webinar “KNX LED Dimmer UD/S”Next Webinar

Disclaimer


The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document.

In no event shall ABB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, nor shall ABB be liable for incidental or consequential damages arising from use of any software or hardware described in this document.

© Copyright [2018] ABB. All rights reserved.

DECEMBER 2018 KNX LED Dimmer UD/S€¦ · Webinar “KNX LED Dimmer UD/S” December 6, 2018 Slide...

Documents

Transcript of DECEMBER 2018 KNX LED Dimmer UD/S€¦ · Webinar “KNX LED Dimmer UD/S” December 6, 2018 Slide...