Decanting Panels · 2019. 4. 4. · Highest flow available Decanting Panels Fully Customisable to...
Transcript of Decanting Panels · 2019. 4. 4. · Highest flow available Decanting Panels Fully Customisable to...
-
Decanting Panels
Fully Customisable to your requirements
High flow design
Single or dual line bleed system
Manual or Automatic Changeover
1-4 hoses
Pre-charge system
Wall or Ground mount frame
Particulate inlet filters optional
Coupling holsters
High flow hose assemblies
Highest flow available on the market
High CV 1” breakaway coupling
High flow composite CNG hose
Screw or Quick Couplings
Hose Hangers with optional limit
switch
DougStumpflIF logo
-
Technology
Pre-Charge system
Fills the downstream equipment in a safe smooth fashion
When changing between trailers there can be a much as 240bar pressure differential
between the pressure in the new trailer being brought online and the current trailer
operating the equipment. Due to the requirement to have large orifice ball valves to
maximise trailer delivery volumes the speed that these open at cause a large shockwave of
gas entering the downstream equipment.
To eliminate the problem Bison has designed into its systems a pre-charge changeover
system which slowly fills the downstream equipment in a controlled manner before the
main line valves open.
High Flow Valving
Bison has included Eclipse high flow Valving into the
decanting system to ensure maximum delivery is
achieved at low operating pressures when the trailer
is almost empty
These include
Full Bore Ball Valves
High flow one piece check Valves
High flow piping and connectors
-
Ground Mount Frame
CONTROLS
Bison offers multiple options for the control of the
system. These are
Manual or Automatic
Single or dual trailers
E-stop system
Status indicators
Pre-charge system
Trailer pressure sensors
-
Hose assemblies
Bison has developed high flow high pressure
technology for decanting and filling trailer systems
Screw Couplings “VCN”
1” High flow screw coupling
Quick Couplings
1” and ¾” high flow quick coupling
Breakaway coupling
1”, ¾” and ½” breakaway couplings
Hose Hangers
Screw and quick coupling Holsters and Hangers
Limit switch optional(screw Couplings only
LOCATION
Bison Compression
113 North Road Clevedon Auckland New Zealand
Phone +6492929115
Email [email protected]
www.bisoncompression.com
mailto:[email protected]