DDR3 Total Solution of Amphenol
description
Transcript of DDR3 Total Solution of Amphenol
DDR3 DDR3 Total Solution of Total Solution of
AmphenolAmphenol
Page 2
DDR3 Architecture Roadmap
DDR3 will become the widely adopted memory architecture for computingArchitecture in 2008.
Page 3
DDR is in line with the computing architecture with the demand for HIGH SPEEDand LOWER POWER COMSUMPTION memory solution.
SPEC DDR DDR2 DDR3Frequency(MHZ)200 ~ 400 400 ~ 800 800 ~ 1,600
Capacity(MB) 128 ~ 1,024 256 ~ 4,096 512 ~ 8,192
Voltage(V) 2.5 1.8 1.5
Pins 184 240 240
CL 1.5 ~ 3 2 ~ 5 5 ~ 11
2-bit 4-bit 8-bitPrefetch bits
DDR vs DDR2 vs DDR3
Page 4
DDR3 Advantage : High Bandwidth
DDR3 memory will provide at least twice the bandwidth of DDR2, with data transfer rates at up to 1.6Gb/s and eventually beyond.
Twice the Bandwidth
Page 5
DDR2 memory is specified for a 1.8V operating voltage while DDR3 memory operates at 1.5V (and maybe 1.35V in future low-power DDR3L devices). Because operating power is proportional to the square of the operating voltage, appreciable drop in operating power—about 30% less!
Really Power Saving
DDR3 Advantage : Power Saving
Page 6
Amphenol DDR3 2010 Product Roadmap
DDR3 240P Stand/narrow DIP type
DDR3 240P SMT type
DDR3 240P Very Low Profile DIP ---VP SDRAM module
DDR3 1.35V DIP type
Page 7
AMTA DDR II/III Connectors Overview G637 Series
G63724A4XXXEU
Vertical DDR II DIMM 1.0 Pitch 240P
T/H Type with metal board lock
G63724C4XXXEU
Fully Buffer DIMM 1.0 Pitch 240PT/H Type with metal board lock
G63724B4XXXEU
Vertical DDR III DIMM 1.0 Pitch 240P
T/H Type with metal board lock
G63724B4XXX1EU
Vertical DDR III DIMM With Narrow Latch
T/H Type with metal board lockG63724D4XX41EU
Very Low Profile DDR III DIMM
G63724B4XXXEU
Vertical DDR III DIMM SMT Type
with metal board lock
Page 8
Vertical DDR3 Connector with Narrow Latch
Application:•Workstations.•Server.•Storage.•Switches.•Routers.
Product Features:Socket outline and footprint comply with JEDEC SO-007.Accept Module Card conforming to JEDEC MO-269.Solder tail options for PCB thickness from 1.57mm to 2.36mm.Latch color options: Black or White.Housing color options: Black, White or Blue 2935U or 284C.Contact area plating: Gold Flash, 15u” or 30u” gold plating.RoHS compliant, Lead free version available.
PN: G63724B4XXX1EUT/H Type with metal board lock
Page 9
Why need the Narrow Latch ?
The server is ventilated by means of extractor fan and the air vents. The heat will be carried away through heat convection. The DDRX module and connector is close to each other due to the limited space. The heat flow was blocked by the connector housing and latch in the direction of heat flow. The narrow latch can increase the gap between connectors and it will be a great benefit to heat dissipation.
Extractor Fan
Air Vents
Source: SUN
Air Flow Direction
Page 10
The latch with the smooth surface and the rounded edge can increase the velocity of air flow and this will be a great benefit to heat dissipation.
Narrow Latch Narrow Latch but no smooth surface
Narrow Latch vs Standard Latch
Smooth Surface
Smooth Surface
4.50mm 6.30mm
Page 11
DDR3 Connector with SMT Type
PN: G63724B4XXX2EUT/H Type with plastic/metal board lock option
Application:•High Destiny PCB •High efficiency Automation
Product Features:Latch color options: Black or Blue.Housing color options: Black, White or Blue 2935U or 284C.Contact area plating: Gold Flash, 15u” or 30u” gold plating.HF compliant, Lead free version available.
Page 12
Why need DDR3 SMT
1.Reduced Labor Cost 2.Enhanced Production
Speed
1.Good Quality Control
Benefit ofDDR3 SMT
1. Increase PCB Component Density
2. More flexible Routing
1. Good Performance in High Speed Signal
Smaller ,Faster ,Better
Page 13
Very Low Profile DDR3 Connector with Narrow Latch
PN: G63724B4XXX1EUT/H Type with metal board lock
Application:•Blade Server.•Sub 1U Server.•High end ATCA server.
Product Features:Providing an overall connector height of less than 20.60mm.Accepting VLP DIMM (18.75mm height) with a seating height of less than 2.40mm.Solder tail options for PCB thickness from 1.57mm to 2.36mm.Latch color options: Black or White.Housing color options: Black, White or Blue 2935U or 284C.Contact area plating: Gold Flash, 15u” or 30u” gold plating.RoHS compliant, Lead free version available.
Page 14
Why Need VL DDR31U Rackmount Server
Blade Server
Height limit
Air Flow
Very Low Profile DDR3 Module
Very Low Profile DDR3 Connector
Page 15
Why we need DDR3 1.35 V connector
With Low LLCR ,we can reduce the power loss to the maximum and so that fully support DDR3 1.35V module on the ideal performance
Page 16
Wesely Huang , Product Manager (Server&Storage Connector) E-mail: [email protected] TEL: +886-3-2647251 FAX: +886-3-3275296 Mobile: +886-919946062 5F., NO361, Fusing 1st Rd., Gueishan Township, Taoyuan County
33375, Taiwan (R.O.C)
AMTA Contact Window