dditions to the 2013 ProgrAm - Design of Medical Devices … · 2019-12-18 · Jeff Bischoff,...
24
ADDITIONS TO THE 2013 PROGRAM International Student Design Showcase Tuesday, April 9, 5:30-7:30, Heritage Gallery, McNamara Alumni Center Paper Additions: Robotic Arm Controlled by a Hybrid Electromyography (EMG) and Accelerometer Zachary Wygant, Christopher Cunningham, and Reza Fazel-Rezai, Biomedical Image and Signal Processing Laboratory, Department of Electrical Engineering, University of North Dakota Judges: Leza Besemann, Technology Strategy Manager, Office for Technology Commercialization, University of Minnesota Richa Goyal, MD, Family Medicine, Allina Medical Clinic Alec Johnson, Associate Professor, Opus College of Business, University of St. Thomas Christopher Scorelli, Chief Medical Officer, Kablooe Design Scott Smith, Medical Technology Consultant Rohan Taneja, Structural Heart Business Development, Medtronic, Inc. Cardiovascular 1: Keynotes Tuesday, April 9, 10:30-12:00, Meridian Ballrooms 3 & 4, The Commons Hotel Keynote Speaker Change: Innovations in AF Ablation - Past, Present, and Future Scott Davie, Director of Product Development, Medtronic AF Solutions Collaborative Design of Medical Devices Tuesday, April 9, 4:00-5:30, Ski-U-Mah, McNamara Alumni Center Speaker Addition: Panel Discussion Mark A. Bennett, P.E. Principal Stress Engineering Services, Inc. FDA and Regulatory Science Tuesday, April 9, 2:00-3:30, Maroon & Gold Room, McNamara Alumni Center Organizer: Arthur Erdman, Director, Medical Devices Center, University of Minnesota Moderator: Dale Wahlstrom, President and CEO, LifeScience Alley Presentations and Q&A Panel Discussion Regulatory Science for Medical Devices: Understanding the Opportunity Diana Salditt, Medtronic, Inc. Clinicians, Government, and Industry Working Together to Bring Safer Medical Devices to Our Patients – AAMI CRMD Committee Transvenous Cardiac Leads Working Group Dan Cooke, Boston Scientific Corporation Regulatory Science as Law and Policy Ralph Hall, University of Minnesota Working with FDA - Past and Present Chuck Swanson, St. Cloud State University
Transcript of dditions to the 2013 ProgrAm - Design of Medical Devices … · 2019-12-18 · Jeff Bischoff,...
Additions to the 2013 ProgrAm
International Student Design Showcase Tuesday, April 9, 5:30-7:30, Heritage Gallery, McNamara Alumni Center
Paper Additions: Robotic Arm Controlled by a Hybrid Electromyography (EMG) and Accelerometer
Zachary Wygant, Christopher Cunningham, and Reza Fazel-Rezai, Biomedical Image and Signal Processing Laboratory, Department of Electrical Engineering, University of North Dakota
Judges:
Leza Besemann, Technology Strategy Manager, Office for Technology Commercialization, University of Minnesota
Richa Goyal, MD, Family Medicine, Allina Medical Clinic
Alec Johnson, Associate Professor, Opus College of Business, University of St. Thomas
Christopher Scorelli, Chief Medical Officer, Kablooe Design
Scott Smith, Medical Technology Consultant
Rohan Taneja, Structural Heart Business Development, Medtronic, Inc.
Cardiovascular 1: Keynotes Tuesday, April 9, 10:30-12:00, Meridian Ballrooms 3 & 4, The Commons Hotel
Keynote Speaker Change: Innovations in AF Ablation - Past, Present, and Future
Scott Davie, Director of Product Development, Medtronic AF Solutions
Collaborative Design of Medical Devices Tuesday, April 9, 4:00-5:30, Ski-U-Mah, McNamara Alumni Center
Speaker Addition: Panel Discussion
Mark A. Bennett, P.E. Principal Stress Engineering Services, Inc.
FDA and Regulatory Science Tuesday, April 9, 2:00-3:30, Maroon & Gold Room, McNamara Alumni Center
Organizer: Arthur Erdman, Director, Medical Devices Center, University of Minnesota
Moderator: Dale Wahlstrom, President and CEO, LifeScience Alley
Presentations and Q&A Panel Discussion Regulatory Science for Medical Devices: Understanding the Opportunity
Diana Salditt, Medtronic, Inc.
Clinicians, Government, and Industry Working Together to Bring Safer Medical Devices to Our Patients – AAMI CRMD Committee Transvenous Cardiac Leads Working Group
Dan Cooke, Boston Scientific Corporation
Regulatory Science as Law and Policy
Ralph Hall, University of Minnesota
Working with FDA - Past and Present
Chuck Swanson, St. Cloud State University
NEW CONFERENCE SPONSOR: Be The Match
NEW 5K SPONSOR: Kitty Corner Cafe
NEW JOB FAIR PARTICIPANT: American PreclinicaServices, LLC.
Additions to the 2013 ProgrAm Medical Sensors Wednesday, April 10, 9:00-10:30, Meridian Ballroom 1, The Commons Hotel
Speaker Addition: Tissue Oxygen Imaging using Photoacoustics
Shai Ashkenazi, Assistant Professor, Biomedical Engineering, University of Minnesota
“Innovation in World Healthcare” Symposium Thursday, April 11, 10:00-11:45, Maroon & Gold Room, McNamara Alumni Center
Keynote Speaker and Panel Member Change: The Business of Saving Lives: Innovation, implementation and scale-up
Kathleen Sienko, Departments of Mechanical and Biomedical Engineering, University of Michigan
Collaborative Design of Medical Devices Wednesday, April 10, 9:00-10:30, Ski-U-Mah, McNamara Alumni Center
Speaker Addition: Panel Discussion
Mike Hess, Medtronic, Inc.
Contributed Papers 2: Fundamental Design Thursday, April 11, 4:00-5:30, Ski-U-Mah, McNamara Alumni Center
Organizer: Just Herder, Delft University of Technology
Moderator: Filip Jelínek, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology
Speaker Change: ‘Research’ and ‘Design’ – How Do We Combine Them To Bring Better Solutions To Market?
Johnny West, The Helen Hamlyn Centre for Design, Royal College of Art
Contributed Papers 1: Fundamental Design Thursday, April 11, 4:00-5:30, Ski-U-Mah, McNamara Alumni Center
Organizer: Just Herder, Delft University of Technology
Moderator: Mindy F. Levin, School of Physical and Occupational Therapy, McGill University, Center for Interdisciplinary Research in Rehabilitation
Design of Medical Devices
Conference2013
Welcome to the 12th Annual University of Minnesota Design of Medical Devices Conference
The Design of Medical Devices Conference was created in 2001 to enhance collaboration between academia and industry, promote policy, research and educational initiatives as they relate to medical device design and to support medical devices education at the University of Minnesota.
This forum, uniquely positioned in the middle of one of the most significant medical device communities in the world, has provided invaluable insight and leadership to promote the future of this evolving industry. Conference attendance has more than tripled since its inception, and we look forward to continued growth.
The success of this conference is due in large part to the continued support from our industry sponsors and University of Minnesota partners. On behalf of the DMD Planning Committee, we thank you. We hope you enjoy this year’s conference!
Sincerely,
The Design of Medical Devices Conference is presented by the University of Minnesota Medical Devices Center (part of the Institute for Engineering in Medicine), the College of Science and Engineering and the Department of Mechanical Engineering. In Cooperation with the University of Minnesota Office of Business Relations.
William Durfee, Ph.D. Conference Co-Chair
John Bischof, Ph.D. Conference Co-Chair
Paul Iaizzo, Ph.D. Conference Co-Chair
Saurav Paul, Ph.D. Conference Co-Chair
Arthur Erdman, Ph.D. Conference Chair
Just Herder, Ph.D. Contributed Papers Chair
Connecting to the Wireless NetworkThe Commons Hotel Commons Conventionwith case-sensitive password: fluorineFor technical assistance (877) 254-4571
McNamara Alumni CenterUofM Guest
©20
13 M
edtr
onic
, Inc
. All
Righ
ts R
eser
ved.
A Story of Innovation That’s Still Being WrittenAt Medtronic, we’re thinking beyond products and beyond the status quo. We are continually striving for breakthrough solutions that help people live better lives, longer.
Innovating for life.
® 2013 Boston Scientific Corporation and its affiliates. All rights reserved.CORP-148904-AA March 2013
Science, no matter how advanced, is only as meaningful as the lives it transforms.
At Boston Scientific, we believe that only an innovation realized can improve health, change an outlook or transform a life. That’s why we’re committed to pioneering, innovating and advancing science. Our heritage of discovery continues to drive our passion for meaningful innovations that address unmet clinical needs across a wide range of medical conditions and help patients live healthier, longer lives.
Visit www.bostonscientific.com to learn more.
YOUR FRONT DOOR TO UNIVERSITY TALENT, TRAINING AND TECHNOLOGY
FDA Registered n ISO 13485 Certified
Medical Device Innovation concept commercialization+
© 2013 Minnetronix. All rights reserved. Visit us at www.minnetronix.com
For over 15 years, Minnetronix has combined design and manufacturing, and our own innovative IP solutions, to help customers transform ideas into commercial success. Our teams expand the boundaries of device performance to create sophisticated medical devices that reliably meet regulatory and market needs.
Engineering Exceptional Results
Medical Device Design
Manufacturing
IP Innovations
o r d e r o f p r e s e n t a t i o n s m a y v a r y
Tuesday, April 9, 20138:15 a.m. Meridian Ballrooms 1-4
The Commons Hotel
Conference Welcome and Plenary Session
Moderators: Arthur Erdman, Conference Chair William Durfee, Conference Co-Chair
Engineering the Future of MedicineBin He, Director, Institute for Engineering in Medicine
Artificial Retina to Restore Sight to the BlindMark S. Humayun, Professor of Ophthalmology, Biomedical Engineering, Cell and Neurobiology, University of Southern California
10:30 a.m. - 12:00 p.m. Concurrent Technical Sessions
COMPUTATIONAL BIOMECHANICSMeridian Ballroom 1
Session Organizers: The Commons HotelJeff Bischoff, Zimmer, Inc. Joan Bechtold, Minneapolis Medical Research Foundation Curtis Goreham-Voss, University of Minnesota
Enabling Faster, Better Medical Device Development and Evaluation with Modeling and Simulation
Tina Morrison Food and Drug Administration
Femoral Fractures: Cadaveric Tests and Numerical Modeling
Dan Dragomir-Daescu Mayo Clinic
Image-based Computational Modeling in Orthopedics
Todd Pietila Materialise
2:00 p.m. - 3:30 p.m. Concurrent Technical Sessions
NEUROENDOVASCULAR DEVICES FOR TREATING STROKE AND VASCULAR MALFORMATION
Ski-U-MahSession Organizer: McNamara Alumni CenterAfshin Divani, University of Minnesota
Engineering Advancements in Neurovascular Devices: A Previous Trend toward Smaller Components Enabled a New Generation of Large Devices
Ben Tompkins Penumbra, Inc.
Minimally Invasive Devices for Treatment of Intracranial Aneurysms
David Kallmes Mayo Clinic
Development of an Endoluminal Microwire for Focal Middle Cerebral Artery Occlusion in Rodents
Afshin A. Divani University of Minnesota
On the Hemodynamics of Intracranial Aneurysms: Insights Gained via Numerical Simulation
Fotis Sotiropoulos University of Minnesota
Novel Predictors of Pial Collateral Recruitment during Middle Cerebral Artery Occlusion
Gregory Christoforidis University of Chicago
HUMAN FACTORS 1: A BUSINESS CASE FOR INTEGRATING HUMAN FACTORS
A.I. Johnson Great RoomSession Organizer: McNamara Alumni CenterKathleen Harder, University of Minnesota
Correlation of Ease-of-Use and Post Market Data in the Adoption of a Novel Surgical Device
David Herridge Incisive Surgical, Inc.
Exploring Melodic Structure to Increase Heterogeneity of Auditory Alarm Sets in Medical Devices
Jessica Gillard McMaster University
More than just Risk Reduction and Regulatory NeedBill Hartman Essential Design
Re-designing the UK Emergency AmbulanceGianpaolo Fusari Royal College of Art, London
Meridian Foyer The Commons Hotel
10:00 a.m. - 10:30 a.m. SPONSOR EXHIBIT SHOWCASE
BIOMATERIALSMeridian Ballroom 2
Session Organizers: The Commons HotelPeter Edelman, Boston Scientific Corporation Chun Wang, University of Minnesota
Bio-Mechano-Electro-Chemical Interactions of Metallic Biomaterials Surfaces
Jeremy Gilbert Syracuse University
Development of New Biomaterials in Valve Replacement
Richard Bianco Univesity of Minnesota
Novel Polymeric Biomaterials for Controlled Drug Delivery and Surface Coating
Chun Wang Univesity of Minnesota
Microparticles in EmbolizationJafar Golzarian Univesity of Minnesota
MEDICAL DEVICE FELLOWS PROGRAMSMeridian Ballroom 1
Session Organizers: The Commons HotelSaurav Paul, University of Minnesota Todd Brinton, Stanford Biodesign
Panel Discussion: Translating Creativity to Medical Device Innovation - Initiatives, Challenges, and Opportunities
Soumyadipta Acharya Johns Hopkins UniversityPaul Dale University of MissouriJames Geiger University of MichiganConor Walsh Harvard University
12:15 p.m. Memorial Hall McNamara Alumni Center
Keynote LuncheonSponsored by Medtronic, Inc.
Moderator: William Durfee, Conference Co-Chair
The University of Minnesota: The Heartbeat of the Medical Device Industry
Eric W. Kaler, President, University of Minnesota
Advances in Regulatory Science: A new Partnership between FDA, Industry and Academia
Dale Wahlstrom, President and CEO, LifeScience Alley
CARDIOVASCULAR 2: MRI SAFE CARDIAC DEVICES
Meridian Ballroom 3 & 4 Session Organizer: The Commons HotelMichael Eggen, Medtronic, Inc.
ISO Technical Specification on MRI Safety for Patients with an Active Implantable Medical Device
Sung-Min Park Medtronic, Inc.
Physiological Risks of Pacing Lead Heating due to MRI Exposure
Michael Eggen Medtronic, Inc.
The Evolution of Standards for Implantable Medical Devices (IMD)
Sandy Wixon Medtronic, Inc.
ENGINEERED TISSUESMeridian Ballroom 2
Session Organizer: The Commons HotelRobert Tranquillo, University of Minnesota
Engineering Functional Myocardium from Stem Cells
Nenad Bursac Duke University
hiPSC Derived Cardiac Muscle for Myocardial Repair: A Preclinical Study
Jianyi (Jay) Zhang University of Minnesota
Cardiac Function Restored with a Tissue Engineered Myocardial Patch in an Acute Rat Infarct Model
Robert Tranquillo University of Minnesota
Engineering a Revascularized Cardiac PatchJeff Ross Miromatrix Medical, Inc.
CARDIOVASCULAR 1: CARDIAC KEYNOTE PRESENTATIONS
Meridian Ballrooms 3 & 4 Session Organizer: The Commons HotelPaul Iaizzo, University of Minnesota
AF Ablation - Challenges and OpportunitiesBoaz Avitall University of Illinois Chicago
4
Innovations in AF Ablation - Past, Present, and Future
Tim Laske Medtronic AF Solutions
o r d e r o f p r e s e n t a t i o n s m a y v a r y o r d e r o f p r e s e n t a t i o n s m a y v a r y
AMERICA INVENTS ACT AND MED TECH INNOVATION
Meridian Ballroom 2 Session Organizer: The Commons HotelSaurav Paul, University of Minnesota Moderator:Reed Heimbecher, Dykema’s Intellectual Property Practice Group
Increasing Value by Rethinking Filing Strategies in the Wake of the America Invents Act
Dinesh Melwani Bookoff McAndrews, PLLCLes Bookoff Bookoff McAndrews, PLLC
The Quest for Global Patent Protection: How Close Are We Getting?
Jay Erstling William Mitchell College of Law
Interplay Between Patent Law and FDA Law: Are You Clear When Your Device Clears?
Suneel Arora Schwegman, Lundberg & Woessner P.A.
MEDCIAL MICRO AND NANO SYSTEMSMeridian Ballroom 2
Session Organizer: The Commons Hotel
Tianhong Cui, University of Minnesota
Sintered Aluminum Foils for High Voltage Capacitors
Greg Sherwood Boston Scientific Corporation
Route of Polymer: Microelectromechanical Systems (MEMS) to Nanoelectromechanical Systems (NEMS)
Tianhong Cui University of Minnesota
The Accidental Sensor: ‘Off-label’ Uses for Thermoluminescent Radiation Dosimeters
Merlin Mah University of Minnesota
CARDIOVASCULAR 3: SIMULATION MODELS FOR CARDIAC DEVICE DESIGN
A.I. Johnson Great Hall Session Organizer: McNamara Alumni CenterKen Merdan, Boston Scientific Corporation
Verification of Integrated Computational Material Engineering for Virtual Life Management® of Medical Devices
Robert Tryon VEXTEC
ASME V&V 40 – Standards Development and Application for Implantable Stents
Sanjeev Kulkarni Boston Scientific Corporation
Advanced Computational Modeling of Endovascular Stent-Grafts
Atul Gupta Medtronic, Inc.
INTERNATIONAL STUDENT DESIGN SHOWCASE
5:30 p.m. - 7:30 p.m. Heratige Gallery McNamara Alumni Center
The purpose of this showcase is to promote and publicize excellence in medical device design by teams of undergraduate and graduate students
conducted as part of their course work. See page 16 for a list of presenters and judges
Meridian Foyer The Commons Hotel
3:30 p.m. - 4:00 p.m. SPONSOR EXHIBIT SHOWCASE
4:00 p.m. - 5:30 p.m. Concurrent Technical Sessions
Tuesday, April 9, 2013
NANOPARTICLE BIOASSAYS Maroon & Gold Room Session Organizer: McNamara Alumni CenterJohn Bischof, University of Minnesota
Point of Care Diagnosis in Low-resource Settings: Potential and Pit-falls
David Bell FIND
Quantum dot Barcodes for High-throughput Multiplex Infectious Disease Detection
Warren Chan University of Toronto
Nanomagnetic Medical Device for Disease Early Detection and Drug Discovery
Jian-Ping Wang University of Minnesota
Thermal Contrast Improves Cryptococcal, TB and Malaria Detection: Preliminary Clinical Results
David Boulware CTropMed
PROSTHETICS AND ORTHOTICSMeridian Ballroom 1
Session Organizers: The Commons HotelAndrew Hansen, Northwestern University Urs Schneider, Fraunhofer Institute
The Mauch Prosthetic Ankle- An Old New ApproachFelix Starker Fraunhofer IPA
Design and Development of the Niagara FootTim Bryant Queens University
Tiny Hydraulics for a Self-contained Powered Ankle Foot Orthosis
William Durfee University of Minnesota
HUMAN FACTORS 2: ARTIFICIAL ORGANS A.I Johnson Great Room Session Organizer: McNamara Alumni CenterRichard Stein, Starkey Hearing Technologies
A Historical Perspective of Artificial OrgansRichard Stein Starkey Hearing Technologies
Respiratory Dialysis: Lung Support Designed for the Pulmonary Intensivist
William Federspiel University of Pittsburgh
Development of the Spheroid Reservior Bioartificial Liver
Stephen Corner Mayo Clinic Rochester
Artificial Pancreas: Human-in-the-[Closed]-LoopKathryn Rieger Animas Corporation, a Johnson & Johnson Company
5
COLLABORATIVE DESIGN OF MEDICAL DEVICES
Ski-U-MahSession Organizer: McNamara Alumni CenterMary Beth Privitera, University of Cincinnati
Panel DiscussionAidan Petrie XimedicaTor Alden HS Design, Inc.Soumya Acharya Johns Hopkins University
ENTREPRENEURSHIP Ski-U-MahSession Organizers: McNamara Alumni CenterJustin Porter, University of Minnesota Karen Kaehler, University of Minnesota
Panel Discussion: What is the JOBS Act/Crowdfunding and How Will it Impact Medical Device Funding for Early Stage Companies
Patrick Donohue INVESTyR and Inspiration Medical Technology Inc.David Jenson Leonard, Street and DeinardStephanie Rich Spark DevicesMark Connelly LiifGroup, LLC & Liifmed.com
MEDICAL DEVICES INDUSTRY JOB FAIR
5:30 p.m. - 7:30 p.m. Pinnacle Ballroom The Commons Hotel
Participating Companies:
AEROTEK www.aerotek.com
COVIDIEN www.covidien.com
NORDSON MICROMEDICS www.nordson.com
PHILLIPS-MEDISIZE CORPORATION www.phillipsmedisize.com
STARKEY HEARING TECHNOLOGIES www.starkey.com
VASCULAR SOLUTIONS, INC. www.vasc.com
7:30 p.m. ADJOURN
FDA AND REGULATORY SCIENCE Maroon & Gold Room Session Organizer: McNamara Alumni CenterArthur Erdman, University of Minnesota
Panel Discussion: Advancing Regulatory ScienceDale Wahlstrom LifeScience Alley
Check the online program or mobile app for additional speakers
CARDIOVASCULAR 5: CARDIAC IMAGING FOR CARDIAC DEVICE
Meridian Ballrooms 3 & 4 Session Organizer: The Commons HotelJianyi (Jay) Zhang, University of Minnesota
Myocardial Tissue Equivalent Transplantation for Cardiac Repair
Robert Tranquillo University of Minnesota
Cardiovascular Risks of Obstructive Sleep Apnea (OSA) and the Novel Management
Jason Sun Curative Medical, Inc.
‘Smart’ Stem Cells Repair Hearts: ‘Landmark work’ Moves Beyond the Bench
Behfar Atta Mayo Clinic and Foundation, Rochester
Wednesday, April 10, 2013
7:15 a.m. Meridian Ballrooms 2-4 The Commons Hotel
THREE-IN-FIVE COMPETITION
Moderators: Randy Schiestl, Boston Scientific Corporation James Krocak, University of Minnesota
A Cancellous Bone Screw with Adjustable Holding Power
Robert Rizza Milwaukee School of Engineering
polyMed Pump- Self-Powered Polymer Muscle-Activated Streaming Therapy
Jeffrey Schoess University of Arizona
DragonFlex - Smart Steerable Laparoscopic Instrument
Filip Jelinek Delft University of Technology
Upper Limb Cycle Ergometer for Supine ExerciseEric Nickel Minneapolis VA Health Care System
Design of an Endonasal Graft Placement Tool for Repair of Skull Base Defects
Richard Hendrick Vanderbilt University
User-based Design Approach to Develop a Traditional Male Circumcision Device
Amir Sabet Sarvestani University of Michigan–Ann Arbor
Development and Evaluation of the Innovative Smartphone Interface Bioelectrical Impedance Analyzer
Junghun Choi Ohio University
Development of a Self-Opening Neural InterfaceAnnarita Cutrone Scuola Superiore Sant’Anna, Istituto di Biorobotica
On Demand Additive Manufacturing of a Basic Surgical Kit
Shayne Kondor Naval Postgraduate Dental School
Minimally Invasive Device for Rapid Urethrovesical Anastomosis
Carlos Pardo-Martin Harvard University
Judges:Ben Arcand, Chief Medical Innovations Engineer, Kablooe DesignTom Hektner, Independent ConsultantMichael Hoey, Founder/CTO, NxThera, Inc.Ross Meisner, Managing Partner, Dymedex Consulting, LLCRandy Nelson, President, Evergreen Medical Technologies, Inc.Danny Sachs, Serial EntrepreneurBrian Scovil, Sr. VP of Operations and Chief Compliance Officer, Torax Medical, Inc.Chengli Song, Executive Director and Deputy Dean, University of Shanghai for Science and Technology
MEDICAL SENSORSMeridian Ballroom 1
Session Organizer: The Commons HotelRajesh Rajamani, University of Minnesota
Sensors for Non-invasive Respiratory DiagnosticsCristina Davis University of California, Davis
Graphene Sensors for Blood Glucose MeasurementSteve Koester University of Minnesota
Micro-machined Opto-acoustic Ultrasound Transducers
Shai Ashkenazi University of Minnesota
Configurable Micro Sensors for Synthetic Skin Applications
Kalpesh Singal University of Minnesota
DRUG DELIVERY DEVICESMeridian Ballrooms 3 & 4
Session Organizer: The Commons HotelRonald Siegel, University of Minnesota
The Emergence of Active Transdermal Drug Delivery
Gary Cleary Corium, Inc.
Sugar-coated Nanocomplexes: Designed Block Copolymers for Therapeutic Delivery
Theresa Reineke University of Minnesota
Targeted Magnetic Hyperthermia for Lung CancerTanmoy Sadhukha University of Minnesota
CARDIOVASCULAR 4: CARDIAC ANATOMY AND PATHOLOGY IN RELATION TO VALVE REPAIR AND REPLACEMENT
A.I Johnson Great Room Session Organizer: McNamara Alumni CenterMichael Bateman, Medtronic, Inc.
Clinical Advances in Cardiac Valve and ReplacementJagdish Butany Toronto General Hospital
The Real Life of a Diagnostician-EchocardiographerHector Michelena Mayo Clinic
Advances in Computed Tomography to Assist Cardiac Valve Repair
Eric Williamson Mayo Clinic
NEUROENGINEERING 1: NEUROIMAGING Meridian Ballroom 1
Session Organizer: The Commons HotelTaner Akkin, University of Minnesota
Using MRI for Quantifying Normal Human Brain Structure and Function, and Characterizing Disease Effects
Bruce Fischl Massachusetts General Hospital
Fast Acquisitions for fMRI and Diffusion ImagingEssa Yacoub University of Minnesota
Resting State fMRI in Focal EpilepsyHuishi (Clara) Zhang University of Minnesota
Optical Imaging of Neural Pathways in the BrainHui Wang University of Minnesota
11:00 a.m. - 12:30 p.m. Concurrent Technical Sessions
SURGICAL ROBOTICS Meridian Ballroom 2
Session Organizer: The Commons HotelTimothy Kowalewski, University of Minnesota
da Vinci and BeyondSimon DiMaio Intuitive Surgical, Inc.
Intraoperative Wireless Tissue PalpationPietro Valdastri Vanderbuilt University
Surgical Robotics Under Fluid PowerDevin Berg University of Wisconsin - Stout
Surgical Robotics and The CrowdCory Schaffhausen University of Minnesota
7:00 a.m. The Commons Hotel
Registration and Continental Breakfast
Meridian Foyer
10:30 a.m. - 11:00 a.m. SPONSOR EXHIBIT SHOWCASE
o r d e r o f p r e s e n t a t i o n s m a y v a r y
MEDICAL DEVICE INNOVATION Ski-U-MahSession Organizer: McNamara Alumni CenterSaurav Paul, University of Minnesota Moderator: Micahel Hoey, Nxthera, Inc.
Bridging the Innovation Gap - Federal Initiatives, Challenges and Opportunities
Sridhar Kota University of Michigan-Ann Arbor
Panel Discussion: Navigating the Uncharted Waters in Medical Device Innovation
Danny Sachs Serial Entrepreneur
Gwenyth Fischer University of MinnesotaJayant Parthasarathy UnitedHealth GroupJim Chiapetta Boston Scientific CorporationKiyoyuki Miyasaka St. Luke’s International Hospital, Tokyo, Japan
6
9:00 a.m. - 10:30 a.m. Concurrent Technical Sessions
o r d e r o f p r e s e n t a t i o n s m a y v a r y
Classification of Schizophrenia with Spatio-Spectro-Temporal Patterns in MEG
Nuri Firat Ince University of Houston
Functional Neuroimaging BiomarkersSteve Stufflebeam Harvard Medical School
Neuroprosthetics and NeuromarkersApostolos Georgeoplis University of Minnesota
WEARABLE MEDICAL DEVICES Meridian Ballroom 2
Session Organizers: The Commons Hotel Lucy Dunne, University of Minnesota
Lars Oddson, Sister Kenny Research Institue
Ruminations on Medical Applications of Wearable Computing, or, I Wouldn’t be Caught Dead Wearing That
Tom Martin Virginia Institute of Technology
Sensing Body Movements thru Garment-integrated Wearable Sensing
Guido Gioberto University of Minnesota
The Evolution of a Truly Wearable, Noninvasive Balance Aid
Conrad Wall, III Harvard Medical School
Wearable Muscle Oxygen Monitoring for AthletesRoger Schmitz Fortiori Design, LLC.
COMPUTER-AIDED DESIGN OF MEDICAL DEVICES
Ski-U-Mah Session Organizer: McNamara Alumni CenterVictor Barocas, University of Minnesota
Towards a Patient Specific Endovascular Treatment of Abdominal Aortic Aneurysms
Jonathan Vande Geest University of Arizona
Predictions of Drug Deposition in Arterial TissueJohn Abraham University of St. Thomas
Improving Medical Device Design Robustness with Simulation and Six Sigma
Ramji Kamakoti Dassault Systemes
Surgical Smart Tools: Programmable DesignTim Kowaleswki University of Minnesota
3:30 p.m. - 5:00 p.m. DQ Room TCF Bank Stadium
SCIENTIFIC POSTER SESSION
A complete list of titles and authors can be found on pages 12-15.
Enter through Premium Entrance under Benton County on the SW side of TCF Bank Stadium.
Shuttle Service will be Available
Meridian Foyer
3:30 p.m. - 4:00 p.m. SPONSOR EXHIBIT SHOWCASE
o r d e r o f p r e s e n t a t i o n s m a y v a r y
MEDICAL DEVICE VALUATION IN THE AGE OF HEALTH REFORM
Meridian Ballroom 3 Session Organizer: The Commons Hotel
Stephen Parente, University of Minnesota Susan Alpert, University of Minnesota
A Case Study of Failed, Venture Funded, Medical Device Start-Up Companies
Adrine Chung University of MinnesotaBeth Lindborg University of Minnesota
Q&A Panel DisscussionSusan Alpert University of MinnesotaMichael Finch University of MinnesotaRandy Nelson University of Minnesota
Wednesday, April 10, 2013VIRTUAL PROTOTYPING FOR MEDICAL DEVICES
Ski-U-MahSession Organizer: McNamara Alumni Center Dawn Bardot, HeartFlow, Inc.
Spatial Interfaces and Immersive Visualization for Data-intensive Design
Dan Keefe University of Minnesota
On Virtual and Augmented Reality Techniques for Minimally Invasive Interventional Guidance
Cristian Linte University of Minnesota
Application of DEM-CFD Approach to Analyze Inferior Vena Cava Filters using STAR CCM+
Kristian Debus CD-adapco
The Use of Patient-specific Anatomic Models in Planning Surgical Interventions
Joel Kuhlmann Mayo Clinic
Noninvasive Assessment of Heart Disease Delivered Through a Web-based Service
Dawn Bardot HeartFlow, Inc.
GETTING A SMALL POPULATION DEVICE TO MARKET: EXAMPLES FROM PEDIATRICS
Ski-U-MahSession Organizer: McNamara Alumni Center Gwenyth Fischer, University of Minnesota
Melody(R) Transcatheter Pulmonary Valve: A Journey from Development to Launch
Anil Mankodi Medtronic Cardiac and Vascular
Finding a Smaller Medical Home for Medical Devices in Development
Martin Bocks University of Michigan
EXCOR Pediatric: Issues Related to the Approval of Pediatric Medical Devices
Robert Kroslowitz Berlin Heart, Inc.
12:45 p.m. Memorial Hall McNamara Alumni Center
KEYNOTE, AWARD AND LUNCHEON
Sponsored by Boston Scientific Corporation
Moderator: Arthur Erdman, University of Minnesota
Presentation of the 2nd Class: IEM Academy of Medical Device Innovators by Bin He, Institute for Engineering in Medicine, University of Minnesota Recipient of the 2013 Design of Medical Devices Conference Award
The Future of Medical DevicesRandy Schiestl, Vice President of R&D, Boston Scientific Corporation
(Keynote lunches are a separate billable event, meal tickets are required.)
2:00 p.m. - 3:30 p.m. Concurrent Technical Sessions
LIVE SURGERYA.I Johnson Great Room
Surgeon: McNamara Alumni CenterDr. Christopher Weight, Department of Urology University of Minnesota On-Site Moderator: Dr. J. Kyle Anderson, Department of Urology University of Minnesota
Dr. Weight will be performing a minimally invasive robotic surgical procedure at the University of Minnesota Medical School-Fairview Hospital. The surgery will be transmitted to the conference via live video feed. Dr. Anderson will be at the conference session explaining the procedure and passing questions from the audience along to the surgeon. The objective of the session is to discuss the strengths, weaknesses and design opportunities for the tools and devices used in modern surgery.
7
6:00 p.m. - 6:30 p.m.
TOUR OF THE TCF BANK STADIUM (Pre-registration required)
Don’t Forget to Complete the DMD Attendee Survey
by April 28, 2013!
As a thank you for your participation, we will randomly drawing two names from the pool of those who have successfully submitted the survey. The prizes include:
(1) One Night Stay at The Commons Hotel in Minneapolis, MN
(1) Complimentary Full Registration for the DMD 2014 Conference
The winners will be chosen and notified shortly after the survey closes.
Your input is greatly appreciated!NEUROENGINEERING 2: BIOMARKERS FOR CHARACTERIZING NEUROLOGICAL DISEASES AND CLINICAL OUTCOMES
Meridian Ballroom 1Session Organizer: The Commons HotelTay Netoff, University of Minnesota
6:30 p.m. ADJOURN
NEUROENGINEERING 3: NEUROVASCULAR TECHNOLOGY
A.I. Johnson Great Room Session Organizer: McNamara Alumni Center
Matthew Johnson, University of Minnesota
Neurovascular Imaging at High-field MRINoam Harel University of Minnesota
Intravenous Recording of Intracranial, Broadband EEG
Mark Bower Mayo Clinic
Computational Modeling of Neuroendovascular Stimulation
Matthew Johnson University of Minnesota
Innovation in World Healthcare Symposium
10:00 a.m. Meridian Ballrooms 2-4 The Commons Hotel
KEYNOTE ADDRESSES
Medical Device Innovation for the BoPAbhay Nihalani GE Healthcare
The Business of Saving Lives: Innovation, Implementation and Scale-up
Rahul Panicker Embrace Innovations
8:00 a.m. - 9:30 a.m. Concurrent Technical Sessions
CONTRIBUTED PAPERS 1: ADVANCES IN MEDICAL MEASUREMENT SYSTEMS
Ski-U-Mah Session Organizer: McNamara Alumni Center
Just Herder, Delft University of Technology
All-optical Photoacoustic Detection of Absorbers in Tissue Phantoms
Jami Johnson Boise State University
A Device to Quantify Sweat In Single Sweat Glands To Diagnose Neuropathy
William Kennedy University of Minnesota
A New Standard in Objective Measurement of Spasticity
Mindy Levin McGill UniversityAnatol Feldman University of Montreal
SurgTrak - A Universal Platform for Quantitative Surgical Data Capture
Kevin Ruda University of Minnesota
Meridian Foyer The Commons Hotel
9:30 a.m. - 10:00 a.m. SPONSOR EXHIBIT SHOWCASE
10:00 a.m. - 11:45 a.m. Concurrent Technical Sessions
Sympoisum Panel Disscussion
Adriana Velazquez Berumen World Health Organization David Kelso Global Northwestern UniversityAbhay Nihalani GE HealthcareRahul Panicker Embrace Innovations
NEUROENGINEERING 4: MULTI-MODAL INTERACTION AND TRAINING OF THE BRAIN
A.I. Johnson Great Room Session Organizer: McNamara Alumni CenterHugh Lim, University of Minnesota
Using Mirrors to Treat Phantom Limb PainJack Tsao US Navy Bureau of Medicine & Surgery
Non-Invasive Brain Stimulation and Neurorehabilitation
Bernadette Gillick University of Minnesota
Virtual Reality for Inducing Visual System Plasticity Stephen Engel University of MinnesotaInnovation in World Healthcare
Symposium8:00 a.m. Meridian Ballrooms 2-4
The Commons Hotel
WELCOME AND INTRODUCTION
Kathleen Sienko, University of Michigan
KEYNOTE ADDRESSES
University Leadership for Innovation in Global Health
David Kelso Global Northwestern University
Needs for Appropriate, Affordable, and Safe Medical Devices
Adriana Velazquez Berumen World Health Organization
CONTRIBUTED PAPERS 2: FUNDAMENTAL DESIGN
Ski-U-Mah Session Organizer: McNamara Alumni CenterJust Herder, Delft University of Technology
‘Research’ and ‘Design’ – How do we Combine Them to Bring BetterSolutions to Market?
Ed Matthews Royal College of Design, London
DragonFlex - Smart Steerable Laparoscopic Instrument
Filip Jelínek Delft University of Technology
An Automatic Object Tracking Steerable EndoscopePing-Lang Yen National Taiwan University
Novel Ex Vivo Testing Model for Monopolar Hot Biopsy Forceps
Liang Chen Ohio University
12:00 p.m. Memorial Hall McNamara Alumni Center
LUNCHEON KEYNOTE AND AWARDSModerator: William Durfee, University of Minnesota
Three-in-Five Awards Presented by Randy Schiestl, Boston Scientific Corporation
What Design Thinking Can Do For YouThomas Fisher, College of Design, University of Minnesota
(Keynote lunches are a separate billable event, meal tickets are required.)
2:00 p.m. GUIDED TOURS
See the mobile app or the ad on the next page for information about the facilities, departure times and locations
o r d e r o f p r e s e n t a t i o n s m a y v a r y
Thursday, April 11, 2013
8
CMYK Uncoatedds18-1u [0, 35, 100, 0] Goldds99-1u [0, 100, 70, 20] Red ds176-u [80, 100, 0, 0] Purple ds207-1u [100, 50, 0, 0] Blueds261-1u [100, 0, 60, 40] Greends325-4u [0, 0, 0, 60] Grey U
Pantone Uncoated138 u Gold187 u Red 2685 u Purple 2945 u Blue336 u Green 405 u Grey
CMYK Uncoatedds325-1u [0, 0, 0, 100] Black U
Pantone UncoatedBlack u
FontsScalaSansScalaSans-Cap
LogoName Text
®
LifeScience Alley is the hub connecting our nearly
700 member organizations.
Join us!
www.LifeScienceAlley.org
IceTake the Plunge & Break the
Networking Breakfast
Thursday, April 11, 20137:00 a.m.
Join us on Day 3 of the Design of Medical Devices Conference for our
networking breakfast in the Meridian Ballrooms.
7:00 a.m. Meridian Ballrooms 2-4 The Commons Hotel
Registration and Networking Breakfast hosted by LifeScience Alley
3:00 p.m. ADJOURN
Tours are Thursday, April 11 at 2:00 p.m. and will depart from Memorial Hall, McNamara Alumni Center. Please sign-up at the conference registration desk before 12 p.m. on Thursday, April 11.
Medical Devices Center new LocAtion! www.mdc.umn.eduThe Medical Devices Center at the University of Minnesota is a unique interdisciplinary program that resides within the Institute for Engineering in Medicine. The MDC aims to strengthen interdisciplinary research among faculty in the health sciences and engineering in areas specifically related to medical devices. The center trains the next generation of medical device inventors (including the Innovation Fellows Program) and fosters new relationships with the medical device industry and government agencies to improve health care worldwide. This tour will highlight the brand new 8,000 square ft. facility that is configured to promote interdisciplinary medical device development including needs assessment, creative brainstorming, prototyping and testing. Additional Tour Times: Tuesday, April 9 at 10:00 a.m. & 3:30 p.m. and Wednesday, April 10 at 10:30 a.m. & 3:30 p.m., depart from The Commons Hotel Registration DeskThursday, April 11 at 2:00 p.m. depart from Memorial Hall, McNamara Alumni Center.
Center for Research Education and Simulation Technologies (CREST) www.crest.umn.eduCREST (Center for Research in Education and Simulation Technologies) is the associated research branch of SimPORTAL (Simulation PeriOperative Resource for Training and Learning), the simulation center for the University of Minnesota Medical School. The mission of CREST is to be a world leader in the research and development of novel curricula and simulation models to drive the future of healthcare professional education. At the heart of our simulation work is an innovative method for building accurate, 3D reconstructions of human anatomy. Using real patient MR and CT data as reference models, and cadaveric photography for accurate texturing, our lab can construct any organ system, catered specifically to any patient, condition, or surgical procedure. Our method allows us to build organ systems in a variety of resolutions, ranging from low end meshes ideal for volumetric simulation, to high end meshes used for photo realistic animation and illustration. We also have an artificial tissue lab with analogue models benchmarked against our human tissue database. CREST is also the host and for Live 3D visualization, recording, and streaming between the FV operating rooms, the Medical School and the Medical Devices Center.
The Visible Heart® Laboratory www.vhlab.umn.edu/atlasDr. Paul Iaizzo has been at the University of Minnesota since 1990, performing research and teaching graduate and undergraduate courses. In 1997, Dr. Iaizzo and his coworkers created the Visible Heart® laboratory in collaboration with Medtronic, Inc. Today, this lab is a premiere place to perform transla-tional systems physiology research that ranges from cellular and tissue studies to organ and whole body investigations. The VH Lab also has a unique human heart library. The Visible Heart® lab embodies a creative atmosphere which is energized by some of the best and brightest students at the University. Our lab staff has over 100 years of collective research experience and functions as a highly efficient and productive team.
Experimental Surgical Services www.ess.umn.eduAt Experimental Surgical Services, we are experts in designing and conducting the appropriate research to determine the safety and efficiency of medical devices. We have more than 25 years of experience in pre-clinical assessment for the medical industry. In fact, we are the industry leader in researching and testing cardiac devices and surgical techniques. We complete over 500 open heart procedures and over 1,500 procedures annually. ESS is Directed by Richard W. Bianco who has more than 25 years of experience in the pre-clinical assessment of virtually every animal model. The ESS staff of in-house surgeons work with device companies to develop and validate research methods, provide consultation as necessary and offer interpretative and technical support.
G U I D E D T O U R S
Interactive Visualization Lab www.ivlab.cs.umn.eduIV Lab research involves data visualization,computer graphics, and human-computer interaction. Current projects include visualization of time-varying (motion) data, large-scale data visualization, perceptually optimized visualization, 3D user interfaces, haptics, and pen and multi-touch input techniques. Our work is supported by the National Science Foundation, National Academies Keck Futures Initiative, grants from industry, and the University of Minnesota. The research group includes about 10 undergraduate and graduate students. The IV lab in 2-203 Keller Hall is equipped with high-end graphics workstations that drive a series of innovative visual displays and interactive devices. Major equipment includes a Multi-Surface, Multi-Touch Virtual Reality Environment and a 3D Haptic (Force-Feedback) Display. We also work regularly with the visualization facilities at the Minnesota Supercomputing Institute.
9
F E A T U R I N G
Hands on Hearts Exhibit
April 9-11, 8 a.m. - 4 p.m. Think 5, The Commons HotelAn interactive display of perfusion fixed human hearts courtesy of the Visible Heart Laboratory and the Department of Surgery. This is a unique library of human hearts received from organ donors and their families via LifeSource and the University of Minnesota’s Anatomy Bequest Program.Perfusion fixation dilates these hearts as if they were filled with blood (diastole). Additionally, computer stations will introduce The Atlas of Human Cardiac Anatomy website and utilize during the display.
www.vhlab.umn.edu
Simulation Technologies
Suite April 9-11, 8:00 a.m. - 4:00 p.m. Think 2, The Commons Hotel
Advanced surgical and medical simulators for training and learning. See the latest simulation equipment used for research and training from the University of Minnesota Center for Research in Education and Simulation Technologies (CREST).
w w w. c re st . u m n . e d u
THANK YOU! 2013 Design of Medical
Devices 5K Fun Run/WalkMonday, April 8, 7:00 p.m.
The University of Minnesota 2012-2013 Medical Devices Center Innovation Fellows and 2013 Design of Medical Devices Conference would like to thank the participants and sponsors of this years 5K Fun Run/Walk held Monday, April 8.
Please join us next year for the Sixth Annual 5K Fun Run/Walk, Monday, April 7, 2014 on the University of Minnesota Campus.
Special thanks to:• Amanda Smock • Bruegger’s • Dermatology Consultants •
• Devicix • Donatelle • Go Helath Chiropractic • Incrediwear • • Kablooe Design • Kelgraphics • Kluge Design, Inc. • Minnetronix •
• Noodles & Company • Old Dutch • Punch Pizza • Run-N-Fun • • Swhwegman, Lundberg & Woessner Law Firm • TC Running Room •
• Toppers Pizza UMN Public Safety & Police Administration • • Whiteboard Product Solutions • Whole Foods •
www.dmd.umn.edu/5K.html10
Edition 2013Europe
SAVE THE DATE!
October 7-9, 2013 Delft, The Netherlands
www.designofmedicaldevices.eu
Responsibilities: • Identifying clinical needs, inventing, and building & testing prototype solutions • Generating 15-20 patentable disclosures on medical devices for diagnosis and treatment • Working closely with clinicians at the University of Minnesota Academic Health Center and partnering with established medical device corporations Eligibility: • Degree in Engineering, Medicine, or Biosciences. Medical or Doctorate degrees preferred • Evidence of creativity and innovation • One or more years of research training Benefits: • Monthly salary and health benefits provided duration of the Fellowship • Use of first-class facilities in engineering & medicine at the University of Minnesota • Access to top MD’s, PhD’s, and innovators at the University of Minnesota and local industry
MEDICAL DEVICES CENTERThe Medical Devices Center at the University of Minnesota is a unique interdisciplinary program that resides within the Institute for Engineering in Medicine. The center has a combined mission of basic research, applied and translational research education and training as well as outreach and public engagement all related to medical devices.
The Medical Devices Center aims to strengthen interdisciplinary research among faculty in the health sciences and engineering specifically related to medical devices. The center trains the next generation of medical device inventors and fosters new relationships with the medical device industry and government agencies to improve health care worldwide.
The MDC has many roles within the University of Minnesota including:
* Accelerating interdisciplinary medical device R&D * Funding new medical device projects based on a rigorous peer review process * Maintaining a core lab with common use equipment for creative prototyping * Facilitating connections to other centers and labs * Supporting UMN functions related to medical devices * Supporting UMN teaching and training programs of departments related to medical devices * Interfacing with the medical device industry * Improving healthcare worldwide
Medical Devices Center
MDC INNOVATION FELLOWS PROGRAM
The University of Minnesota is recruiting a cross-disciplinary team for collaborative medical device innovation. Those encouraged to apply include: postgraduate engineers, experienced physicians as well as those in their residency or fellowship training, bio-scientists, seasoned medical device professionals, business professionals, IP attorneys, medical practitioners and others with a special interest in medical device innovation. Applicants must be dedicated to improving human health and well-being. Successful candidates are self-driven and highly motivated individuals with entrepreneurial spirit and committed to working in a collaborative team setting.
The University of Minnesota Medical Devices Center Innovation Fellows Program is sponsored by the University of Minnesota Medical Devices Center, part of the Institute for Engineering in Medicine. The program already has seen much success with more than 100 invention disclosures and more than 50 patent applications filed on those inventions in the program’s first four years.
INNOVATORS WANTED! Applications Now Being Accepted for the Medical Devices Center Innovation Fellows 2013-14 Team
How to Apply: For more information please see the Medical Devices Center website www.mdc.umn.edu. Submit a cover letter, resume or curriculum vitae, statement of medical device product innovation interests and contact information for three references. Positions will be filled on a rolling basis as qualified applicants apply. (Requisition Number 183027).
The application deadline is Friday, April 19, 2013.
Please direct questions regarding this application process to [email protected] University of Minnesota Medical Innovation Fellows Program is sponsored by the University of Minnesota Medical Devices Center, part of the Institute for Engineering in Medicine, University of Minnesota.
The University of Minnesota is committed to the policy that all persons shall have equal access to its programs, facilities, and employment without regard to race, color, creed, religion, national origin, sex, age, marital status, disability, public assistance status, veteran status, or sexual orientation.
11
Scientific Poster Session Wednesday, April 10, 3:30 p.m. - 6:00 p.m.
DQ Room, TCF Bank Stadium
Final two-page technical briefs will be published in the June or September 2013 Issue of the ASME Journal of Medical Devices
1. Design and Development of a Modular Medical Simulation Prototype for Pediatric Spinal Detethering Surgeries Joshua Bailey, Christopher Frank, Edna Lesle, Kalyani Nair, Ankit Patel, Martin Morris, Alyssa Macuk and Mathew Lesniak, Bradley University; Julian Lin, University of Illinois College of Medicine at Peoria
2. A Cancellous Bone Screw with Adjustable Holding Power Robert Rizza, Department of Mechanical Engineering, Milwaukee School of Engineering; XueCheng Liu and Scott Van Valin, Department of Orthopaedic Surgery, Medical College of Wisconsin
3. 3-Dimensional Reconstructions of the Human Coronary Artery System using Contrast Computed Tomography of Perfusion-fixed Specimens Julianne Spencer, Departments of Biomedical Engineering and Surgery, University of Minnesota; Matthew Venegoni, Department of Physiology, University of Minnesota; Paul A. Iaizzo, Departments of Biomedical Engineering and Surgery, Institute of Engineering in Medicine, University of Minnesota
4. Exploring Melodic Structure to Increase Heterogeneity of Auditory Alarm Sets in Medical Devices Jessica Gillard and Michael Schutz, McMaster Institute for Music and the Mind, McMaster University
5. The Design of a Novel Bone Preserving Hip Implant with Functionally Graded Cellular Material Sajad Arabnejad Khanoki and Damiano Pasini, Department of Mechanical Engineering, McGill University
6. Flexible Carbon Nanotube Composite Sensors for Medical Device Application Wade R. Eichhorn, 7-Sigma, Inc.; A. Serdar Sezen, St. Cloud State University
7. PolyMed Pump-Self-Powered Polymer Muscle-activated Streaming Therapy Jeffrey Schoess, Eden Medical, Inc.; David Armstrong and Manish Bharara, University of Arizona; Kannan Sivaprakasam, St. Cloud State University
8. CT Registration of Instruments: Experimental Determination of Fiducial Marker Material and Registration Errors Maarten M. Arnolli and Michel Franken, Demcon Advanced Mechatronics; Dannis M. Brouwer, Demcon Advanced Mechatronics, Mechanical Automation and Mechatronics, Faculty of Engineering Technology, University of Twente
9. Differentiation of Bilateral Neuromodulation for Bladder Control using a Preclinical Model Xin Su, Neuromodulation Research, Medtronic, Inc.; Angela Nickles, Physiology Research Laboratory; Dwight E. Nelson, Neuromodulation Research, Medtronic, Inc.
10. Design of a Signal Conditioning Device for Remote Breath and Swallowing Sounds Recording Kyle Nemez, Ahmed Byagowi, Samaneh Sarraf and Zahra Moussavi, Biomedical Engineering Program, University of Manitoba
11. Design of a Wireless Biological Signal Conditioning System Paul White, Ahmad Byagowi and Zahra Moussavi, Biomedical Engineering Program, University of Manitoba
12. DragonFlex - Smart Steerable Laparoscopic Instrument Filip Jelínek, Rob Pessers and Paul Breedveld, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology
13. Bio-inspired Spring-loaded Biopsy Harvester Filip Jelínek and Paul Breedveld, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology
14. A Model of Drug Deposition Within Artery Walls John Abraham, John Stark and John Gorman, University of St. Thomas, School of Engineering; Ephraim Sparrow, Department of Mechanical Engineering, University of Minnesota; Rob Kohler, Cardiovascular Systems, Inc.
15. Development of a Coring Test for Non-coring Huber Needles Oleg Vesnovsky and Jon P. Casamento, Center for Devices and Radiological Health, US Food and Drug Administration
16. Thermal Conductivity Measurements of Thin Biological Tissues Using a Microfabricated 3-Omega Sensor Jeunghwan Choi, Department of Mechanical Engineering, University of Minnesota; Sean D. Lubner, Department of Mechanical Engineering, University of California, Berkeley; Harishankar Natesan, Department of Mechanical Engineering, University of Minnesota; Yasuhiro Hasegawa, Graduate School of Science and Engineering, Saitama University; Anthony Fong, Department of Mechanical Engineering, University of California, Riverside; Chris Dames, Department of Mechanical Engineering, University of California, Berkeley; John C. Bischof, Department of Mechanical Engineering, University of Minnesota
17. Designing Out Medical Error (DOME) Jonathan West and Ed Matthews, Helen Hamlyn Centre for Design, Royal College of Art; Oliver Anderson, Imperial College
18. ‘Research’ and ‘Design’ – How Do We Combine Them To Bring Better Solutions To Market? Ed Matthews, Jonathan West, Gianpaolo Fusari and Karina Torlei, The Helen Hamlyn Centre for Design, Royal College of Art
19. An Assistive Mechanical Device For Mandibular Reconstruction Ching Shiow Tseng, Department of Mechanical Engineering, National Central University; Tien-Hsiang Wang, Department of Mechanical Engineering, National Central University, Division of Plastic and Reconstruction Surgery, Taipei Veterans General Hospital; Chi-Pin Huang, Department of Mechanical Engineering, National Central University
20. Surgical Access System for Frugal Bariatric Surgery Mitsuhiro Oura, Medical Devices Center, University of Minnesota; Hector J. Menchaca, Department of Surgery, University of Minnesota; Arthur G. Erdman, Medical Devices Center, University of Minnesota; Henry Buchwald, Department of Surgery, University of Minnesota
21. Upper Limb Cycle Ergometer for Supine Exercise Eric Nickel, Minneapolis VA Health Care System; Andrew Hansen, Minneapolis VA Health Care System, Department of Physical Medicine and Rehabilitation, University of Minnesota; Gary Goldish, Department of Physical Medicine and Rehabilitation, University of Minnesota; Stuart Fairhurst, Minneapolis VA Health Care System, Department of Electrical Engineering and Department of Biomedical Engineering, University of Minnesota; Steve Morin, Minneapolis VA Health Care System
22. Device Optimization Using Pulse Wave Analysis Techniques Ashish Singal, Departments of Biomedical Engineering and Surgery, Medical Devices Center, University of Minnesota; Mitsuhiro Oura, Medical Devices Center, University of Minnesota; Mohamed Almekkawy, Department of Electrical and Computer Engineering, University of Minnesota; Aimee Hamel, Matt Larson and Peter Eckman, Department of Cardiovascular Division, University of Minnesota
23. Compliant Device for Abdominal Wall Lifting in Gasless Laparoscopy Jared Ostdiek and Carl Nelson, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln
24. Gaze Contingent Control for a Robotic Laparoscope Holder Xiaoli Zhang and Songpo Li, Division of Engineering and Physics, Wilkes University; Jiucai Zhang, A123 Sytems, Inc.; Heinric Williams, Geising Medical Center, Department of Urology
25. Design of an Endonasal Graft Placement Tool for Repair of Skull Base Defects Richard J. Hendrick, Ray A. Lathrop, John S. Schneider and Robert J. Webster III, Department of Mechanical Engineering, Vanderbilt University
26. Experimental Analysis of Jaw-tissue Interaction Forces using a Compliant Surgical Grasper Alan Goyzueta and Carl Nelson, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln; Brittany Woodin, Department of Biomedical Engineering, University of Iowa; Linxia Gu, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln
12
27. Decoupled Cable-driven Grasper Design Based on Planetary Gear Theory Baoliang Zhao and Carl A. Nelson, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln28. Portable Laparoscopic Training System using Virtual Reality Mohsen Zahiri and Carl A. Nelson, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Ka-Chun Siu, School of Allied Health Professions, University of Nebraska Medical Center29. Surface Modification of Polyimide Thin Films for Peripheral Invasive Neural Interfaces M. Righi and S. Bossi, The BioRobotics Institute, Scuola Superiore Sant’Anna; G.L. Puleo, Center of Micro-BioRobotics, Italian Institute of Technology; G. Giudetti, The BioRobotics Institute, Scuola Superiore Sant’Anna, Center of Micro-BioRobotics, Italian Institute of Technology; P. Wieringa, The BioRobotics Institute, Scuola Superiore Sant’Anna, Center of Micro-BioRobotics, Italian Institute of Technology, MIRA Institute for Biomedical Technology and Technical Medicine, University of Twente; Annarita Cutrone, The BioRobotics Institute, Scuola Superiore Sant’Anna; S. Micera, The BioRobotics Institute, Scuola Superiore Sant’Anna, Translational Neural Engineering Laboratory, Ecole Polytechnique Federale de Lausanne30. Optimization of Transcutaneous Energy Transmission Systems Suitable for Left Ventricular Assist Devices Kelly Byron, Stanford University; Vlad Bluvshtein and Lori Lucke, Minnetronix, Inc.; John Pauly, Stanford University31. Uniaxial Wireless Tissue Palpation Device for Minimally Invasive Surgery Marco Beccani and Christian Di Natali, Vanderbilt University; Mark Rentschler, University of Colorado; Pietro Valdastri, Vanderbilt University32. Rapid Prototyping of Flexible Structures for Tissue Engineered Ear Reconstruction Thomas M. Cervantes, Erik K. Bassett, Alan Tseng and Anya Kimura, Department of Surgery, Massachusetts General Hospital; Nicholas Roscioli, Kensey Nash Corporation; Joseph P. Vacanti, Irina Pomerantseva and Cathryn A. Sundback, Department of Surgery, Massachusetts General Hospital, Harvard Medical School33. Conductivity Testing System for Determining Surface Properties of Biomaterials under Load Nguyen Thao Nguyen, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln, AMME International Laboratory, LECAP, Université de Rouen; Mohamed Benzohra, AMME International Laboratory, LECAP, Université de Rouen; Carl A. Nelson, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Jean-Marc Saiter, AMME International Laboratory, LECAP, Université de Rouen34. A 1.0V 12-bit 500kS/s SAR ADC with Background Calibration for BioMedical Application Chia-Lin Hu and Ted Higman, Department of Electrical Engineering, University of Minnesota35. Investigation of an Early Intervention Tibial Component for Medial Osteoarthritis Miriam Chaudhary, Department of Orthopaedic Surgery, New York University Hospital for Joint Diseases, Department of Chemical and Biological Sciences, New York University-Poly; Peter S. Walker, Department of Orthopaedic Surgery, New York University Hospital for Joint Diseases, Department of Mechanical and Aerospace Engineering, New York University-Poly36. Using Value Stream Mapping to Improve Medical Device Development Christopher Sweem, Stan Crossett and Lori Lucke, Minnetronix, Inc.37. User-based Design Approach to Develop a Traditional Male Circumcision Device Amir Sabet Sarvestani, Design Science Program, University of Michigan–Ann Arbor; Kathleen H. Sienko, Departments of Mechanical Engineering and Biomedical Engineering, University of Michigan–Ann Arbor38. In Vitro Study of Transcatheter Delivery of a Shape Memory Polymer Foam Embolic Device for Treating Cerebral Aneurysms Wonjun Hwang, Department of Biomedical Engineering, Texas A&M University; Pooja Singhal, Department of Biomedical Engineering, Texas A&M University, Chemical Sciences Division, Lawrence Livermore National Laboratory; Matthew W. Miller, Small Animal Clinical Sciences, Texas A&M University; Duncan J. Maitland, Department of Biomedical Engineering, Texas A&M University
39. Development and Evaluation of the Innovative Smartphone Interface Bioelectrical Impedance Analyzer ByungHo Choi and Ho Joon Kang, Donut System LSI Co., LTD.; Ho Gil Cho, Electronics and Telecommunications Research Institute; JungHun Choi, Department of Mechanical Engineering, Biomedical Engineering Program, Ohio University
40. Using Modeling and Simulation in the Design of Closed-loop Insulin Delivery System David Hoadley and Arvind Ananthan, MathWorks, Inc.
41. Development of a Self-Opening Neural Interface Annarita Cutrone and Silvia Bossi, Scuola Superiore Sant’Anna, Istituto di Biorobotica; Silvestro Micera, Scuola Superiore Sant’Anna, Istituto di Biorobotica, Translational Neural Engineering Laboratory, Ecole Poytechnique Federale de Lausanne
42. Design of Cervical Brace for Trauma Patients Karina Torlei and Ed Matthews, Helen Hamlyn Centre for Design, Royal College of Art; Alison Sparke, Great Western Ambulance Service NHS Trust; Jonathan Benger and Sarah Voss, University of the West of England; Nigel Harris, Bath Institute of Medical Engineering; Jane Carter, Royal National Hospital for Rheumatic Diseases
43. A Comprehensive Overview of Removal Methods for the Surgical Treatment of Cushings Disease for Human and Veterinary Applications Aimée Sakes and Ewout A. Arkenbout, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology; Johannes H. van der Kolk, Section Equine Metabolic and Genetic Diseases, Euregio Laboratory Services; Paul Breedveld, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology
44. Spectral Analysis Based Limb Movement Reconstruction Using Inertia Sensing Data Jheng-Jie Huang, Graduate Institute of Biomedical Engineering, National Central University; Chi-Tai Yang, Department of Mechanical Engineering, National Central University; Bo-Chuan Chen, Graduate Institute of Biomedical Engineering, National Central University; Min-Chun Pan, Graduate Institute of Biomedical Engineering, National Central University, Department of Mechanical Engineering, National Central University
45. Parallel Scanning Architecture for Mammogram-based Diffuse Optical Imaging Jhao-Ming Yu and Liang-Yu Chen, Department of Mechanical Engineering, National Central University; Hung-Chih Chiang, Department of Mechanical Engineering and Graduate Institute of Biomedical Engineering, National Central University; Min-Cheng Pan, Department of Electronic Engineering, Tungnan University; Sheng-Yih Sun and Chia-Cheng Chou, Tao-Yuan General Hospital; Min-Chun Pan, Department of Mechanical Engineering and Graduate Institute of Biomedical Engineering, National Central University
46. A Surgical Simulation Model for Myelomeningocele Repair Julian Lin, College of Medicine, University of Illinois; Crispin B. Weinberg and Danice Y. Chou, Biomedical Modeling, Inc.
47. An Improved Puncture Access Tip-retraction Mechanism Nikolai Begg, Department of Mechanical Engineering, Massachusetts Institute of Technology
48. A Comprehensive Overview of Multi-branched Instruments Intended for NOTES and SILS Ewout A. Arkenbout and Paul Breedveld, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology
49. Sensor for Measuring the Contact Force from Human Myenteric Contractions for In-vivo Robotic Capsule Endoscope Mobility Benjamin S. Terry, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Matthew M. Francisco, Department of Mechanical Engineering, University of Colorado at Boulder; Jonathan A. Schoen, Department of Surgery, University of Colorado at Denver; Mark E. Rentschler, Department of Mechanical Engineering, University of Colorado at Boulder
Final two-page technical briefs will be published in the June or September 2013 Issue of the ASME Journal of Medical Devices
Scientific Poster Session Wednesday, April 10, 3:30 p.m. - 6:00 p.m.
DQ Room, TCF Bank Stadium
13
Scientific Poster Session Wednesday, April 10, 3:30 p.m. - 6:00 p.m.
DQ Room, TCF Bank Stadium
Final two-page technical briefs will be published in the June or September 2013 Issue of the ASME Journal of Medical Devices
61. On Demand Additive Manufacturing of a Basic Surgical Kit Shayne Kondor and Peter Liacouras, Naval Postgraduate Dental School; James R. Schmid, US Army/Baylor University EMPA Doctoral Fellowship, Joint Base Lewis-McChord; Michael Parsons, US Army Joint Training Branch/ Deployable Training Team; Vipin K. Rastogi and Lisa S. Smith, US Army Edgewood Chemical Biological Center, Aberdeen Proving Grounds; Bill Macy and Brian Sabart, Stratasys, Inc.; Christian Macedonia, Defense Advanced Research Projects Agency Arlington
62. A Novel Approach for Assured Sterility of Medical Devices Vipin K. Rastogi and Lisa Smith, BioDefense Branch, Biosciences Division, R&T Directorate, US Army – ECBC, APG, MD; James R. Schmid, US Army/Baylor University, EMPA Doctoral Fellowship, JBLM, WA; Mike Parsons, US Army, JTB/DTT, JCW, DD J7; Gerald Grant and Shayne Kondor, Naval Postgraduate Dental School; Chris Macedonia, Defense Advanced Research Projects Agency
63. A New Standard in Objective Measurement of Spasticity Mindy F. Levin, School of Physical and Occupational Therapy, McGill University, Center for Interdisciplinary Research in Rehabilitation; Anatol G. Feldman, Department of Physiology, University of Montreal, Center for Interdisciplinary Research in Rehabilitation; Aditi A. Mullick and Marcos Rodrigues, School of Physical and Occupational Therapy, McGill University, Center for Interdisciplinary Research in Rehabilitation
64. Design of a Powered Lower-extremity Orthosis for Sit-to-Stand and Ambulation Assistance John Skelton, Sai-Kit Wu and Xiangrong Shen, Department of Mechanical Engineering, University of Alabama
65. Epidural Simulation for Patients of Various BMI and Body Shapes Neil Vaughan and Venketesh N. Dubey, School of Design, Engineering and Computing, Bournemouth University; Michael Y. K. Wee and Richard Isaacs, Poole Hospital NHS Foundation Trust
66. Role of Frontal Sinus on Primary Blast-induced Traumatic Brain Injury Praveen Kumar Akula, Yi Hua and Linxia Gu, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln
67. Conus Arteriosus as an Alternate Pacing Site Ashish Singal, Departments of Biomedical Engineering and Surgery, University of Minnesota; Noora Hussain, Department of Surgery, University of Minnesota; Robert Marcaccini, Integrative Biology and Physiology, University of Minnesota; Anthony J. Weinhaus, Integrative Biology and Physiology, University of Minnesota; Paul A. Iaizzo, Departments of Biomedical Engineering, Integrative Biology and Physiology, Department of Surgery, Institute of Engineering in Medicine, University of Minnesota
68. A Low-cost Computer Vision Based Approach for Tracking Surgical Robotic Tools Rodney Dockter and Timothy M. Kowalewski, Department of Mechanical Engineering, University of Minnesota
69. Geometrical Optimization of V-shaped Microcantilever for Biosensors Guanfeng Zhang and Linxia Gu, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln
70. A Product Development Methodology: Design and Simulation of Coronary Stents Anweshana Vaizasatya, Gabriela de Mattos Veroneze, Z.C. Li and Zhigang Xu, Department of Industrial and Systems Engineering, North Carolina A&T State University
71. Minimally Invasive Device for Rapid Urethrovesical Anastomosis Carlos Pardo-Martin, Meredith Duffy, Katie Hoffman, Rajesh Poddar, Donal Holland, Ellen Roche and Conor Walsh, School of Engineering and Applied Sciences, Harvard University; Kevin Loughlin, Department of Urology, Brigham and Women’s Hospital
72. Mechanical Performance of Bovine Pericardial Bioprosthetic Valves Shengmao Lin, Praveen Akula and Linxia Gu, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln
50. Multifunctional Laparoscopic Trocar with Built-in Fascial Closure and Stabilization Qian Wan, School of Engineering and Applied Sciences, Harvard University; Oliver Schoppe, Harvard College, Harvard University, Department of Electrical Engineering, Munich University of Technology; Suvai Gunasekaran, Harvard College, Harvard University; Dónal Holland, School of Engineering and Applied Sciences, Harvard University, Department of Mechanical and Manufacturing Engineering, Trinity College; Ellen Roche, School of Engineering and Applied Sciences, Harvard University; Hye-Chun Hur, Department of Obstetrics and Gynecology, Beth Israel Deaconess Medical Center; Conor Walsh, School of Engineering and Applied Sciences and Wyss Institute for Biologically Inspired Engineering, Harvard University
51. Gross Positioning System for In-vivo Surgical Devices Eric Markvicka, Kearney Lackas, Tom Frederick, Joe Bartels and Shane Farritor, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Dmitry Oleynikov, Department of Surgery, University of Nebraska Medical Center
52. Quantifying Forces at the Tool-tissue Interface of a Surgical Laparoscopic Grasper Astrini Sie and Timothy M. Kowalewski, Department of Mechanical Engineering, University of Minnesota
53. Correlation of Ease-of-Use to Evaluation Trial Conversion, Customer Retention and User Complaints for the Adoption of a Novel Surgical Device David Herridge, Incisive Surgical, Inc.
54. A Small Manufacturer’s Five Step Re-think of ISO14971 for Design Control in the Post-production Lifecycle of a Surgical Device David Herridge, Incisive Surgical, Inc.
55. Haptic Sensing for use in Miniature In-vivo Robotic Grasping Tasks Tom Frederick, Eric Markvicka, Joe Bartels, Kearney Lackas and Shane Farritor, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln; Dmitry Oleynikov, Department of Surgery, University of Nebraska Medical Center
56. All-optical Photoacoustic Detection of Absorbers in Tissue Phantoms Jami Johnson and Michelle Sabick, Department of Mechanical and Biomedical Engineering, Boise State University; Kasper VanWijk, Department of Geosciences, Boise State University
57. Redesigning the UK Emergency Ambulance Ed Matthews, Gianpaolo Fusari and Yusuf Muhammad, Helen Hamlyn Centre for Design, Royal College of Art; Dale Harrow, Peter Stevens and Richard Winsor, Vehicle Design Department, Royal College of Art; Jonathan Benger, University of the West of England; Dixie Dean, London Ambulance Service; Lord Ara Darzi and Dominic King, Imperial College Healthcare NHS Trust
58. Advanced Needle Coatings for Improved Lumbar Drain Procedure Megan Doerzbacher and Andrew Barnett, Department of Mechanical and Nuclear Engineering, Pennsylvania State University; Nicholas Brandmeir, Department of Neurosurgery, Hershey Medical Center; Doug Wolfe, Department of Materials Science and Engineering, Pennsylvania State University; Siyang Zheng, Department of Bioengineering, Pennsylvania State University; Jason Moore, Department of Mechanical and Nuclear Engineering, Pennsylvania State University
59. Reconfigurable Fiducial-integrated Modular Needle Driver for MRI-guided Percutaneous Interventions Wenzhi Ji, Joshua D. Matte, Gang Li, Yunzhao Ma, Hao Su, Weijian Shang and Gregory S. Fischer, Automation and Interventional Medicine Laboratory, Department of Mechanical Engineering, Worcester Polytechnic Institute
60. Personalized Surgical Instruments Shayne Kondor and Peter Liacouras, Naval Postgraduate Dental School; James R. Schmid, US Army/Baylor University EMPA Doctoral Fellowship, Joint Base Lewis-McChord; Michael Parsons, US Army Joint Training Branch/ Deployable Training Team; Bill Macy and Brian Sabart, Stratasys, Inc.; Christian Macedonia, Defense Advanced Research Projects Agency Arlington
14
Final two-page technical briefs will be published in the June or September 2013 Issue of the ASME Journal of Medical Devices
Scientific Poster Session Wednesday, April 10, 3:30 p.m. - 6:00 p.m.
DQ Room, TCF Bank Stadium73. Kinematic Differences in Posterior Stabilized Total Knees Determined by a Holistic Experimental Evaluation Method Peter S. Walker, Michael T. Lowry, Gokce Yildirim and Anoop Kumar, Laboratory for Orthopaedic Implant Design, Department of Orthopaedic Surgery Hospital for Joint Diseases
74. Development of a Low-cost Inspection Arm to Map the Available Workspace within the Abdominal Cavity Walter Bircher, Eric Markvicka, Jack Mondry, Tom Frederick, Joe Bartels and Shane Farritor, Department of Mechanical Engineering, University of Nebraska-Lincoln; Dmitry Oleynikov, Department of Surgery, University of Nebraska Medical Center
75. Preliminary Design of a Minimally Invasive Mitral Valve Heart Retractor Bethany Lowndes, Brad Balogh, Aaron West, Edward Raines and M. Susan Hallbeck, University of Nebraska-Lincoln
76. Irreversible Electroporation of Cardiovascular Cells and Tissues Chunlan Jiang, Department of Mechanical Engineering, University of Minnesota; Ryan Goff, Departments of Biomedical Engineering and Surgery, University of Minnesota; Pong Patana-anake, Department of Mechanical Engineering, University of Minnesota; Paul A. Iaizzo, Departments of Mechanical Engineering and Biomedical Engineering and Surgery, Institute for Engineering in Medicine, University of Minnesota; John Bischof, Departments of Mechanical Engineering and Biomedical Engineering, Institute for Engineering in Medicine, University of Minnesota
77. Novel Ex Vivo Testing Model for Monopolar Hot Biopsy Forceps Liang Chen, Department of Biomedical Engineering; Ramiro Malgor, Department of Biomedical Sciences; David Drozek, Heritage College of Osteopathic Medicine; JungHun Choi, Department of Mechanical Engineering, Ohio University
78. Did Anyone Say BINGO: A Socially Assistive Robot to Promote Stimulating Recreational Activities at Long-term Care Facilities Wing-Yue Louie and Runqi Han, Department of Mechanical and Industrial Engineering, University of Toronto; Goldie Nejat, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto Rehabilitation Institute
79. Accelerometer Based Absolute Positioning for a Miniature In-vivo Surgical Robot Joseph Bartels, Thomas Frederick, Eric Markvicka, Kearney Lackas and Shane Farritor, Department of Mechanical and Materials Engineering, University of Nebraska–Lincoln; Dmitry Oleynikov, Department of Surgery, University of Nebraska Medical Center
80. Novel Pneumatic Device for High Speed Needle Insertion in Brachytherapy Kelilah Wolkowicz, Department of Mechanical and Nuclear Engineering, Pennsylvania State University; Patrick McLaughlin, Department of Radiation Oncology, University of Michigan Hospital; Jason Z. Moore, Department of Mechanical and Nuclear Engineering, Pennsylvania State University
81. Predicting Regional Brain Cooling Following Intracranial Thrombectomy with Localized Therapeutic Hypothermia Ryan A. Sikorski, Department of Mechanical Engineering, Rowan University; Denise R. Merrill, Department of Mechanical Engineering, Rowan University, FocalCool, LLC.; Thomas L. Merrill, Department of Mechanical Engineering, Rowan University
82. Development of a Computational Whole Body Pediatric Model for Investigation of Medical Devices on Children Haojie Mao and King H. Yang, Bioengineering Center, Wayne State University
83. MAT-MI For Bioimpedance Contrast Imaging Leo Mariappan, Department of Biomedical Engineering, University of Minnesota; Bin He, Department of Biomedical Engineering, Institute for Engineering in Medicine, University of Minnesota
84. Artery Remodeling in Hypotension Using a Topology Optimization Method Shijia Zhao and Linxia Gu, Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln
85. Laparoscopic Tool with Adjustable Sponge at Distal Tip for Direct/Indirect Suction Modulation David Orozco, Kamyar Davoudi, Christopher Ding, Rachel Field, Rashid Yasin, Ellen Roche, Donal Holland and Conor Walsh, School of Engineering and Applied Sciences, Harvard University
86. High Resolution Simulation of Tri-leaflet Aortic Heart Valve in an Idealized Aorta Trung Bao Le, Anvar Gilmanov and Fotis Sotiropoulos, Saint Anthony Falls Laboratory, Department of Civil Engineering, University of Minnesota
87. An Automatic Object Tracking Steerable Endoscope Ping-Lang Yen, Yi-Jing Chu, Rey-Heng Hu, Chi-Chuan Yeh and Ren C. Luo, Department of Bio-Industrial Mechatronics Engineering, National Taiwan University
88. Method for Detecting Ablation Damage using Sensor Integration of Hot Biopsy Forceps Randolph Robert, Department of Mechanical Engineering, Ohio University; Liang Chen, Biomedical Engineering Program, Ohio University; Rajesh Shanbhag, Department of Mechanical Engineering, Ohio University; David Drozek, Department of Specialty Medicine, Ohio University; JungHun Choi, Department of Mechanical Engineering, Biomedical Engineering Program, Ohio University
89. Measurement System for the Characterization of Micromanipulation Motion and Force Frank L. Hammond III, Simon G. Talbot, Robert J. Wood and Robert D. Howe, School of Engineering and Applied Sciences, Harvard University
90. SurgTrak - A Universal Platform for Quantitative Surgical Data Capture Kevin Ruda and Darrin Beekman, Mechanical Engineering Department, University of Minnesota; Lee W. White, Bioengineering Engineering Department, University of Washington; Thomas S. Lendvay, Department of Urologic Surgery, University of Washington, Seattle Children’s Hospital; Timothy M. Kowalewski, Mechanical Engineering Department, University of Minnesota
91. Automated Electro-mechanical Assessment of Psychomotor Skill for High-Stakes Certification in Surgical Robotic Alexander J. Doud, Department of Biomedical Engineering, University of Minnesota; Rodney Dockter II, Department of Mechanical Engineering, University of Minnesota; Sanket Chauhan and Robert Sweet, Department of Urologic Surgery, University of Minnesota; Timothy Kowalewski, Department of Mechanical Engineering, University of Minnesota
92. A Device to Quantify Sweat In Single Sweat Glands to Diagnose Neuropathy William R. Kennedy, Mona M. Selim and Gwen Wendelschafer-Crabb, Department of Neurology, University of Minnesota; Anne H. Blaes, Department of Medicine, University of Minnesota; Fabian Suter, Zurich University of Applied Sciences; Maria Nolano and Vincenzo Provitera, Department of Neurology, Salvatore Maugeri Foundation IRCCS-Medical Center of Telese
93. 3D Assessments of Patent Foramen Ovale within Human Hearts: Insights Relative to Design Considerations for Medical Devices Stephen A. Howard and Paul A. Iaizzo, Departments of Surgery and Biomedical Engineering, Institute for Engineering in Medicine, University of Minnesota
94. Parkinsonism State Uncouples Correlation between Subthalamic Nucleus ß-band Activity and Motor Performance Laurentiu Popa, Department of Neuroscience, University of Minnesota; Rahul Gupta and Dwight Nelson, Medtronic, Inc.; Timothy J. Ebner, Department of Neuroscience, University of Minnesota
95. Intermittent Vagus Nerve Stimulation Reflexively Modulates Heart Rate Variability in Rats with Chronic Ischemic Heart Failure Joseph Ippolito, Xueyi Xie, Bruce H. KenKnight and Elena G. Tolkacheva, Department of Biomedical Engineering, University of Minnesota
15
“HOW TO BECOME A MEDICAL TECHNOLOGY INNOVATOR” MEDICAL DEVICES INNOVATION WORKSHOP
We want to thank all attendees who participated in the 2013 Medical Devices Innovation Pre-conference Workshop!
Save the Date for 2014 Medical Devices Innovation Workshop
Monday, April 7, 2014
International Student Design ShowcaseTuesday, April 9, 5:30pm-7:30pm, Heritage Gallery, McNamara Alumni Center
The purpose of this showcase is to promote and publicize excellence in medical device design by teams of undergraduate and graduate students that have been conducted as part of their course work. Outstanding student designs will be judged on their
entry documents and the poster presented by the students at the showcase held durig the DMD Conference.
Teams are competing for one of three cash prizes: $500, $300, and $200.
# Title Author and Affliation1 A Novel Design Approach for Lower Limb
Rehabilitation Training RobotJiangcheng Chen and Xiaodong Zhang, School of Mechanical Engineering, Xi’an Jiaotong University
2 Minimally Invasive Device for Rapid Urethrovesical Anastomosis
Carlos Pardo-Martin, Meredith Duffy, Katie Hoffman, Rajesh Poddar, Donal Holland, Ellen Roche and Conor Walsh, School of Engineering and Applied Sciences, Harvard University; Kevin Loughlin, Department of Urology, Brigham and Women’s Hospital
3 A Safer and More Efficient Laparoscopic Morcellator Design
Kimberly M. Murdaugh, Alexander Isakov and William C. Burke, School of Engineering and Applied Sciences, Harvard University
4 Design, Prototyping and Evaluation of a Collapsible Device for Single-operator Sheathing of Ultrasound Probes
Saul A. Lopez, Lauren R. Hernley and Elizabeth N. Bearrick, Mechanical Engineering Department, Massachusetts Institute of Technology; Laura M. Tanenbaum, Health Sciences and Technology Department, Massachusetts Institute of Technology; Marcel A. C. Thomas and Teddy A. Touissant; Mechanical Engineering Department, Massachusetts Institute of Technology
5 Low-cost Electro-mechanical Assessment Tools for the Development of Psychomotor Competency in Procedural Surgical Skills
Alexander Doud, Rodney Dockter, David Vetter, Jalal Rana, Michael Koester, Zachary Rzeszutek and Jón Andri Hjaltason, University of Minnesota
6 A Novel Uterine Manipulator Incorporating Non-local Controls and Lateral Motion
Daniel Dorsch, Brandon Evans, Joshua Nation, Alfonso Perez, Natasha Wright and Nikolai Begg, Mechanical Engineering Department, Massachusetts University of Technology
7 CentriCycle Harish Kilaru and Carolyn Yarina, University of Michigan-Ann Arbor8 Automatic Syringe Pump for the Developing
World and BeyondGlenn Fiedler, Lemuel Soh, Jinwoo Peter Jung and Kevin Jackson, Bioengineering Department, Mechanical Engineering Department, Rice University
9 Device to Accurately Place Epidural Tuohy Needle for Anesthesia Administration
Neil Vaughan, Bournemouth University
10 Vascular Access Needle with Sensing Electrodes
Olivia Rengering, Michael Lambert and Calvin Wilson, School of Energy, Environmental, Biological, and Medical Engineering Biomedical Engineering Senior Capstone, University of Cincinnati
11 Computer Aided Ruler based on Symmetric Points Detection for Botox Injections
Leila Azinfar, Mohammadreza Ravanfar and Reza Fazel-Rezai, Electrical Engineering, University of North Dakota
16
2013 Technical Organizing CommitteeTaner Akkin Neuroengineering 1: NeuroimagingSusan Alpert Medical Device Valuation in the Age of Health ReformVictor Barocas Computer-Aided Design of Medical DevicesDawn Bardot Virtual Prototyping of Medical DevicesMike Bateman Cardiovascular 4: Cardiac Anatomy and Pathology in Relation to Valve Repair and ReplacementJoan Bechtold Computational BiomechanicsJeff Bischoff Computational BiomechanicsJohn Bischof Nanoparticle BioassaysTodd Brinton Medical Device Fellows ProgramsTianhong Cui Medical Micro and Nano SystemsAfshin Divani Neuroendovascular Devices for Treating Stroke and Vascular MalformationLucy Dunne Wearable Medical DevicesPeter Edelman BiomaterialsMike Eggen Cardiovascular 2: MRI Safe Cardiac DevicesArthur Erdman FDA and Regulatory ScienceGwenyth Fischer Getting a Small Population Device to Market: Examples from PediatricsCurtis Goreham-Voss Computational BiomechanicsAndrew Hansen Prosthetics and OrthoticsKathleen Harder Human Factors 1: A Business Case for Integrating Human FactorsJust Herder Contributed Papers 1: Advances in Medical Measurement Systems
Contributed Papers 2: Fundamental DesignPaul Iaizzo Cardiovascular 1: Cardiovascular KeynotesMatthew Johnson Neuroengineering 3: Neurovascular TechnologyKaren Kaehler EntrepreneurshipTim Kowalewski Surgical RoboticsHugh Lim Neuroengineering 4: Multi-modal Interaction and Training of the BrainKen Merdan Cardiovascular 3: Simulation Models for Cardiac Device DesignTay Netoff Neuroengineering 2: Biomarkers for Characterizing Neurological Diseases and Clinical OutcomesLars Oddson Wearable Medical DevicesSteve Parente Medical Device Valuation in the Age of Health ReformSaurav Paul Medical Device Fellows Programs
Medical Device InnovationAmerica Invents Act and Med Tech Innovation
Justin Porter EntrepreneurshipMary Beth Privitera Collaborative Design of Medical DevicesRajesh Rajamani Medical SensorsRandy Schiestl Three-in-Five CompetitionRonald Siegel Drug Delivery DevicesKathleen Sienko “Innovation in World Health Care” Symposium ChairRick Stein Human Factors 2: Artificial OrgansUrs Schneider Prosthetics and OrthoticsBob Tranquillo Engineered TissuesChun Wang BiomaterialsJay Zhang Cardiovascular 5: Cardiac Imaging for Cardiac Device
17
Premiere
Executive Associate
Supporting
D e s i g n o f M e d i c a l D e v i c e s C o n f e r e n c e 2 0 1 3 C o r p o r a t e S p o n s o r s
TM
Edition 2013Europe
ZIMMER, INC.
2013 DMD Conference Planning Committee: John Bischof, Conference Co-Chair Cortney Davis, Assistant Coordinator William Durfee, Conference Co-Chair Arthur Erdman, Conference Chair Just Herder, Contributed Papers Chair Jenny Holden, Conference Administrator Paul Iaizzo, Conference Co-Chair Trisha Johnson, Conference Coordinator Meghan Moore, Assistant Coordinator Saurav Paul, Conference Co-Chair Gary Williams, AV Technical Specialist
International Advisory Board: Just L. Herder, Delft University of Technology, The Netherlands
Special thanks to: American Society of Mechanical Engineers American Society of Mechanical Engineers Bioengineering Division BioBusiness Alliance of Minnesota Conference Volunteers Corey Benson and Staff Coghlan Communication Group D’Amico Catering Department of Biomedical Engineering, University of Minnesota James McCabe Photography and Printing LifeScience Alley McNamara Almuni Center PSAV Presentation Services TCF Bank Stadium The Commons Hotel Wallace | Carlson Printing
Design of Medical Devices Conference 2015April 13, 14 - 16
The Commons Hotel, Minneapolis, MN
Design of Medical Devices Conference 2014April 7, 8 - 10
The Commons Hotel, Minneapolis, MN
Save the Dates!
