DDC20 Axial Piston Variable Displacement Pump Data Sheet · and allows for a more simplified...
Transcript of DDC20 Axial Piston Variable Displacement Pump Data Sheet · and allows for a more simplified...
For more than 40 years, Danfoss has been developingstate-of-the-art components and systems for mobilemachinery used in off-highway operations around theworld. We have become a preferred supplier byoffering the best of what really matters: The hardwareinside your vehicle application.
The DDC20 uses proven technology which enables itto operate reliably in light duty applications. Itsdesign includes many optional features whichprovides for a large degree of application flexibility.Its compact size helps the DDC20 fit in tight placesand allows for a more simplified hydraulic circuitdesign. The DDC20 is a high quality light duty pumpwhich offers expanded functionality, great totalefficiency, low noise, and easy installation.
The DDC20 is well suited for turf care applications,compact utility tractors, harvesters, small rollers, andagricultural vehicles.
Features
• Designed for Durability and Flexibility‒ Compact and light weight aluminum
housing‒ Single piece swash plate
• Installation and Packaging Benefits‒ Compact design minimizes
installation space requirements‒ High corner power‒ Integrated loop flushing valve
• Optimized for Direct DisplacementControl
• Options‒ Loop flushing valve‒ Gerotor charge pump‒ Loop bypass valve‒ High Pressure Relief Valve (HPRV)
and Charge Pressure Relief Valve(CPRV)
‒ Auxiliary pad
Comprehensive technical literature onlineat powersolutions.danfoss.com
Data Sheet
DDC20Axial Piston Variable Displacement Pump
© Danfoss | February 2017 L1102651 | AI00000112en-US0203 | 1
Technical specifications
Features Unit Value
Displacement cm3 [in3] 20 [1.22]
Weight (with charge pump) kg [lb] 10 [22.1]
Input speed Minimum* min-1 (rpm) 500
Rated 4000
Maximum 4500
System pressure Max. working pressure** bar [psi] 300 [4350]
Max. pressure 345 [5004]
Min. low loop 4 [58]
Case pressure Rated bar [psi] 1.5 [21.7]
Maximum 3 [43.5]* No load condition.** Applied pressures above max. working pressure require Danfossapproval.
Schematic
P400 047
A
B
M3 MA
MBL1
L3
L2 S
Dimensions:With Aux-Pad (No Charge pump)
With Charge pump (No Aux-Pad)
P400 048
External Charge Supply "E"
Case Drain Port "L1"
Loop Flushing Valve
(Optional)
Port ISO 11926-1-9/16-18
Port ISO 11926-1-3/4-16("L2" on Reverse Side)
Bypass Valve
High Pressure Relief Valve
(or Charge Gage Port "M3")
(Both Side)
Approximate
Center of Gravity
15 [0.59]
[ ]
60.94 [2.4]
9.7 0-0.5
0.38 0-0.02
51.5
[2
.03]
73.6
[2.9
]
31
[1.2
2]
175.5 [6.91]
17 [0.67]
177.5 [6.99]
193.5[7.62]
(2)
[0.0
6]
111 [4.37]
35
[1.3
8]
74 [2.91]
M10x1.5
M8 P1.25
16 Full thread depth[0.71]
High Pressure
Relief Valve
High PressureRelief Valve
79.2 [3.12]
74.5
[2
.97]
53.2 [2.09]
53.2 [2.09]
53.2
[2
.09]
53.2
[2
.09]
Ø 1
9.5
±0.0
8
Ø 0
.77
±0.0
08
Ø 1
6 ±
0.08
[0.6
3]
R5
10 ±0.25 [0.39]
[
]
24.5 ±0.2 [0.96]
16 ±0.08 [0.63]
108 [4.25]
80.4
[3
.17]
60.4 (2x) [2.38]
(1) [0.03]
73
[2.8
7]73
[2
.87]
87
[3.4
3]87
[3
.43]
CWCCW
14.3 [0.56]
73
[2.8
7]73
[2
.87]
87
[3.4
3]87
[3
.43]
CWCCW
[
]
17+0.06
-0.04
0.669+0.0024
-0.0016
79.2 [3.12]
1
80.4
[3.1
7]74
.5[2
.95]
108 [4.25]
18° 18°
65.6
[2.6
]
131.5[5.18]
CWCCW
Bypass ValveCase Drain Port "L1"Port ISO 11926-1-3/4-16("L2" on Reverse Side)
High Pressure Relief Valve(Both Side) 15
[0.59]
(2)
[0.0
8]
183.5 [7.22]
51.5
[2
.03]73
.6 (2
x) [2
.9]
17 [0.67]
[
]
Ø 1
01.6
0 -0.0
5
Ø 4
.0 0 -0
.002
34
[1.3
3]
60.94 [2.4] [0.38]
9.7
74 [2.91] 0
-0.5
(101)[3.98]
Approximate
Center of Gravity
2x Ø 14.3 0.3
-0.1
[ ]Ø 0.56 0.011-0.003
Case drain “L3”
View A
A
Port ISO 11926-1-7/8-14
System Port "B"
Case
Dra
inCa
se D
rain
Port ISO 11926-1-7/8-14
System Port "A"
28
[1.1
]28
[1
.1]
137.5 [5.41]
Charge Pressure Relief Valve
71 [2
.8]
71 [2
.8]
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to productsalready on order provided that such alterations can be made without changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | February 2017 L1102651 | AI00000112en-US0203