DCDS-600NC - DoALL Sawing Products€¦ · DCDS-600NC. - 1-888-362-5572 A and A1 highlighted -...

www.DoALLsaws.com - 1-888-362-5572

Job ProgrammingDCDS-600NC


A and A1 highlighted - Manual run screen


A and A2 highlighted - GTO indexer movement

RTO head swivel movement


GTO or manual movement of the indexer to a given point


RTO manual movement of the saw head


A and A3 highlighted - gives you manual hot keys for machine

movement during band change


A and A4 highlighted - SERVICE SCREENS (password protected)


Pick program from the list or create your own from a blank


Name program and save


B and B2 highlighted - allows you to pick by file name


B and B3 highlighted - allows you to pick or delete jobs


B and B3 highlighted - allows you to create a job run list


C and C1 highlighted - displays your program of choice


C and C2 highlighted - shows what the program is running


C and C3 highlighted - shows feed rate options


C and C4 highlighted - comments screen for the program:

feed rate, band speed, etc.


D and D1 highlighted - auto run screen


D and D2 highlighted - run list screen


D and D3 highlighted - run times etc.


B pick program


C and C1 highlighted - start filling out info

make sure to save after entering


C and C1 highlighted - enter all info


Fill in all fields and hit SYM or ASYM and your part will be drawn.

SYM equals common line parts while ASYM will crop cut each part.


SYM is single parts from a common line


CMU automatically back material up after cut before head is raised

- Remember to save your work


Hit OK and you are good to go


Copyright © DoAll Sawing Products. All Rights Reserved. No image(s) or part(s) from this site may be reproduced without the written permission of Continental

Machines, Inc. Options, specifications, prices and site content is subject to change without notice or obligation. Machine safety items may be omitted for

illustration purposes only -- For proper application, always read the operation manual.

Repair, replacement and service parts are available online at www.DoALLsaws.com/store. All quotes pricing includes standard electrical. For proper

application, always read the operation manual. Options, specifications and prices are subject to change without notice or obligation.

DoALL, StructurALL and SAM - The Sawing Answer Man are all registered trademarks of DoALL Company.

DoALL® Sawing Products is the original manufacturer

of metal cutting industrial band saws and continues to be

an industry leader after nearly 85 years.

Call 1-888-362-5572 or visit www.DoALLsaws.com.

DCDS-600NC - DoALL Sawing Products€¦ · DCDS-600NC. - 1-888-362-5572 A and A1 highlighted -...

Documents

Transcript of DCDS-600NC - DoALL Sawing Products€¦ · DCDS-600NC. - 1-888-362-5572 A and A1 highlighted -...