DC90 SeriesControl System - Roller Star USA · setting. otherwise the system will restore the...
Transcript of DC90 SeriesControl System - Roller Star USA · setting. otherwise the system will restore the...
II II ~I:n~ supportm,v.HZ3.868MHZ·
Control System
DC90 Series Control SystemSpecification
---- - --- ~- --- -- - --..,.... .._- -------~
D Type Specification
up bunon -----,f--, up button
1---I
i>1-button
down button
stop button
1>1+ button ----+""--7---'
D(93
Pi-burton
settingbutton (P2) -----'''t-
up button ••downbutton---+---¥F I
stop button -_-+----'1>1+ button ------r"---t---'
1. __D(94
Technical Support
DC90 series: DC90 DC92 DC93 DC94
a Input voheqe: uv• EmissionFrequency:
433-92MHz ± 100KHz.
• EmissionPm"'-er:10 milliwatt• Work temperature-to'c -SOO(
m Emission distance:open 200m, two walls 30m
II Transmitter: You (an choose single channel (D(90), five channels (DC92). Each indicator light means one controlchannel. Press 'channel choose' button Pi- (indicator move left side) or PI+ (indicator move right side) to change thechannel. On the analogy of this, loose finger when the indicator light move to suitable chennet that you select effectivechannel. All indicator lights flash that means all channels iseffective (group control state).
• Transmitter: You can choose nine channels (0(93), fifteen channels (D(94). One number of LCDscreen means onecontrol channel. Press 'channel choose' button Pt- (number descending) or PI+ (number irKreasing) to change thechannel. On the analogy of this, loose finger when the indicator light move to suitable channel that you select effectivechannel. If LCDscreen number show 0 that means all channels is effective (group control state).
II Notice: transmitter Do not exposed to moisture and strike, so as not to affect life.When you use transmitter, if found emission distance obviously short or less sensitive, please change another same nE"Nbattery. please have batteries for ~ding. .
Matchable RTubular Motor Set up A Delet all the dates of the motorand the new emitter has
been programmed.
T <..10S••AdditionalFunction
The interval of each buttonmust within 10 seconds of re-
/~ : ~.'''::' ." setting, otherwise the system
~
'~-, ,'-.. t0J~~--+0k (Th~:lr::::::~:~~inal state.
Sound ."".-, -, ': I w~J Set up is ok
I. I. I irommotor -, H...•e.ardidi... '. press.u .•.P•..•button The up iimit button control.\:.~, _ . . %~ one time. _'''=' : the motor clockwise
~. I '"Hear long sound X2 £T]' -.-
contioue to press . .--+ Iff! 'i--+ ok (The second code-setting Isetting button two times (Pl) ft.; Set up is ok
""=- The down limit button control~~~~i~;n button ~e motqr-..5l..ockwise _
Switch on
AdditionalFuncfion
A The interval of different buttonmust within 10 seconds of allsetting. otherwise the system willrestore the original state
~
one receiver store 20 emitters channelsat most, and one channel of emitter
can control 20 receivers at most.Matchable DC41/42 Set up
+Press the UPlimit button oftransmitter
Setting is ok
See indicator flashingand extinguished
Switch en Press the STOP buttonPress the receiver See indicator flashing to see the receiverprogramming key indicator long flashing
AdditionalFunction
A The interval of different buttonmust within 10 seconds of allsetting, otherwise the system willrestore the original state
~
one receiver store ao emitters channelsat most, and one channel of emitter
can control 2.0 receivers at most.Matchable DC43 Set up
."f.~..~,..·.~.Ok~ ~ ~ ~ Setting is ok
Switch on See the receiver Press the UPPress the receiver See green Press the STOP button green lndicetor of limit button of See green indicator flashingprogramming key indicator flashing of receiver long flashing transmitter and extinguished